I have checked all appropriate settings and compared them to the sound settings on my sensation. All the right boxes are checked. Volume keys work. Getting message/email alerts with no problem. The touch tone sounds work when I dial, and haptic feedback works. For some reason, I'm not getting key press sounds when I type (those settings are on also) and I'm not getting the click noises when I press icons. Nor am I getting the lock screen sounds when I lock/unlock my phone.
I have a rooted G2x. I've tried CM7.1RC1, nightly #76 and also the stock rom.
Please... Any help is greatly appreciated. I'm going out of my mind.
Related
I recently built a ROM using mUn's 5.2.968 (Build 17217) and the kitchen. It has been working fine but today I managed to hit the volume control and put the phone on vibrate. Anyway I put it back on ring but it seems to be stuck on Vibrate. I have the volume control set to the middle for the PDA, and one step higher for the phone, also with the phone screen on and click menu, options it is set to Ring Type 'Ring' and Ring Tone to one of the built-in files. However it refuses to ring when I get an incoming call; it just vibrates
Any ideas?
Thanks
Andy
This actually happens periodically in all WM6 roms I've tried. For me, I've only noticed this happen when I've pressed and held the Comm button to switch to Vibrate and then switch it back. To fix the problem you can either go to Settings > Phone and play your ring tone (just hit the play arrow) or do a soft reset.
I used to see this more on NTS and XPlore 1.1 than I've seen on Faria Vanilla (not sure I ever saw it there) or on my Crossbow Reloaded (I've seen it once) but to be honest after realizing it appeared to be tied to the press and hold of the COmm button to enable and disable vibrate, I've pretty much quit using that feature. I don't know that I've ever seen it happen if I drag the volume (not ring volume but phone volume) to Vibrate or off and then back.
I've chalked it up to one of the "bugs"/"features" of WM6...
I have an difficulty with my ringtone on my Android 2.2.1 on no-name Chinese hardware
Whenever I put it into silent mode (for example from the lock screen (stock Android lock screen), it nicely goes silent, and shows the appropriate vibrate notification icon.
But if I undo that, even though the volume settings go to max again and the vibrate notification goes away, I still get no sound when someone calls. In fact, if I press volume up, I see a warning that "Silent ringtone selected" as subtext to the volume slider.
I have to go to my audio file and hard set it as ringtone again to get it to make a sound again while ringing.
Anyone recognizes this issue and knows how this is caused, and/or how I can prevent it?
I realize it may be some script or config file the Chinese messed up, so some hints as to what script or config file for this may help me also.
PS: I did search the net and XDA for "silent ringtone" but to no avail
Hey all,
I am coming from an EVO 3D which had CyanogenMod 10 with JB 4.2. When I pressed either of the volume rockers, the volume bar would pop up with the option to change all 3 volume settings, ringer/media/alarm.
On my nexus 5, I had to set up a shortcut for Sound Settings in order to change all 3 volumes. Am I missing a shortcut or easier way to adjust all 3 volumes? When I currently press the volume rocker, it only lets me change the volume for the ringer (or media if I'm playing music/games).
Thanks!
In the Settings hit Sound and then Volumes.
ehupp01 said:
In the Settings hit Sound and then Volumes.
Click to expand...
Click to collapse
Try actually reading the OP before you reply next time.
I really miss this option as well. I know some custom roms on my GS3 used to have an option make that sound bar expandable or always expanded.
troll
Actually, shaneledford understood exactly what I was asking. I was just asking to see if there was a way to enable this volume setting.
Too bad Google didn't catch on to this neat little shortcut.
This issue drives me up the wall. Anyone knows a way to quickly adjust volumes without digging through the settings I would greatly appreciated.
Sent from my Nexus 5 using Tapatalk
Hi,
When you switch on the phone , you have a ringtone I would like to disable, is this possible ?
I didn't manage to find anything in the parameters.
Thanks
There isn't an option like Motorola or other OEM, but if you turn off your phone in "silent mode", when you turn it on again there will be no sound.
cri347 said:
There isn't an option like Motorola or other OEM, but if you turn off your phone in "silent mode", when you turn it on again there will be no sound.
Click to expand...
Click to collapse
OK , I just tried..... and it works.
I wish I had a sound symbol to press on and off like wifi, torch light etc.... may be with an update later on who knows.
Anyway thanks a lot for the tip, I appreciate very much.
When you press a button of the volume rocker appears on the screen the slider to adjust the volume, right? If you press on the ring bell next to the slider the device goes in "silent mode" without changing the volume and in place of the ring bell appears the vibration symbol. If you press on the vibration symbol, the ring bell appears again and the volume returns to your favorite setting. It is a quick setting that allows you to switch between ringtone and silent mode without changing the volume, but placed in the quick volume menu, rather than in the general quick settings.
As an alternative you have the DND (Do Not Disturb) mode that has its toggle in the quick settings.
Yes this noise annoys me too but I rarely turn my phone off unless there is a reboot due to updates.
The other day I adjusted my volumes all to around 80% via the sound and notifications options. A couple of days ago, I noticed that my ringer is muted (the bell shows a diagonal line through it with the volume slider all the way to the left). If I tap on the ringer icon, nothing happens. If I try to slide the volume slider with my finger, it does not react. If I try to adjust it using the volume buttons, nothing happens. The other two volume sliders - alarms and media - work fine. I have DND turned off. I can't figure out why I can't turn my ringer back on. Anybody have any ideas?
Notification slider maybe ?
RealLordK1 said:
Notification slider maybe ?
Click to expand...
Click to collapse
LOL. Yup. That's it. This is my first OnePlus, so I'm not used to having that on a phone. ;D
Edit: wrong thread ?
Muted Ringer
Even I am facing same problem. My Phone's ringer is muted and I am unable to bring it back to normal state. Someone please help.
Edit :screenshots attached. Hopefully this would do some good.
MJiindal said:
Even I am facing same problem. My Phone's ringer is muted and I am unable to bring it back to normal state. Someone please help.
Edit :screenshots attached. Hopefully this would do some good.
Click to expand...
Click to collapse
Read the thread and you will see how OP fixed it... Your fix is exactly the same........................
whizeguy said:
Read the thread and you will see how OP fixed it... Your fix is exactly the same........................
Click to expand...
Click to collapse
Do you mind acting as my troubleshooter, guide here? I tried but couldn't figure out how exctally OP fixed it. Request you to kindly take me on a guided tour. I shall be thankful.
Above the power button you have a slide button.
It has 3 modes
Top- mute all, no vibrate
Middle- mute sound and vibrate only
Bottom - regular, all sound and vibrations. (this is where u want to have it if you want sound)
Thank You Whizeguy
whizeguy said:
Above the power button you have a slide button.
It has 3 modes
Top- mute all, no vibrate
Middle- mute sound and vibrate only
Bottom - regular, all sound and vibrations. (this is where u want to have it if you want sound)
Click to expand...
Click to collapse
Got it. Thank you so much. Really thankful.
I'm having the same problem but my slider won't work but I can't unmute my phone
I was having the same problem and didn't know it until I went to a web site that sends an sms. I had to restart the phone to turn ringtones back on.
whizeguy said:
Above the power button you have a slide button.
It has 3 modes
Top- mute all, no vibrate
Middle- mute sound and vibrate only
Bottom - regular, all sound and vibrations. (this is where u want to have it if you want sound)
Click to expand...
Click to collapse
Thank you so much, I totally forgot about that switch and was getting very frustrated till I read this response.
Thank you so much! I too was having trouble with mine and had not idea what was meant by the slider bar until you said it was above the on/off switch. Much appreciated!
BL
OnePlus7pro ringer muted.
You've got to be kidding lol
I've been walking around for 3 days without my ringer working and it was just the slide button!
Good grief, i must be dumber than a box of rocks?
Shout out to the guy that took the time to answer our dumb question.