Related
I recently upgraded my captivate with the official att/samsung froyo release. So far it seems to have made my phone worse. It's slower, and freezes periodically. I was wondering if it's possible to root after the official upgrade or is this blocked. Hoping I can root and flash new kernel and get better performance. This droid world is new to me, so any assistance would be appreciated, especially if it's written for a novice.
Btw, I've done 2 master resets hoping it would help, and it didn't.
Here is how to install AT&T's official 2.2 Froyo ROM with all of the suckiness removed and a bunch of awsomeness added.
1. Download this. Rename it update.zip and copy it to sd_card, the the phone's internal memory,not the removable micro sd card.
http://www.mediafire.com/?ve234hbg64ctcu0
2. Download this, and copy it to sd_card.
http://www.designgears.com/roms/cognition/Cognitionv4.3.1.zip
3. Use this tool to flash back to 2.1 (don't master clear)
http://forum.xda-developers.com/showthread.php?t=731989
4. Remove battery, hold vol up + vol down + power and reinsert battery. Phone will boot into recovery mode.
5. In recovery select "reinstal packages". Then reboot
6. If phone reboots back into a the same recovery, repeat 5
7. Phone should boot into a custom recovery.
8. Select install zip -> choose zip -> Cognitionv4.3.1.zip -> install
9. Reboot
cypho said:
Here is how to install AT&T's official 2.2 Froyo ROM with all of the suckiness removed and a bunch of awsomeness added.
1. Download this. Rename it update.zip and copy it to sd_card, the the phone's internal memory,not the removable micro sd card.
http://www.mediafire.com/?ve234hbg64ctcu0
2. Download this, and copy it to sd_card.
http://www.designgears.com/roms/cognition/Cognitionv4.3.1.zip
3. Use this tool to flash back to 2.1 (don't master clear)
http://forum.xda-developers.com/showthread.php?t=731989
4. Remove battery, hold vol up + vol down + power and reinsert battery. Phone will boot into recovery mode.
5. In recovery select "reinstal packages". Then reboot
6. If phone reboots back into a the same recovery, repeat 5
7. Phone should boot into a custom recovery.
8. Select install zip -> choose zip -> Cognitionv4.3.1.zip -> install
9. Reboot
Click to expand...
Click to collapse
Dont you think you should have told the op that those are directions for flashing Cognition 4.3.1?? What if he doesn't want to flash a rom, just a kernel?
OP: Download Superclick v1.7. It will root your phone. From there, search Development threads for a kernel.
cypho said:
Here is how to install AT&T's official 2.2 Froyo ROM with all of the suckiness removed and a bunch of awsomeness added.
1. Download this. Rename it update.zip and copy it to sd_card, the the phone's internal memory,not the removable micro sd card.
http://www.mediafire.com/?ve234hbg64ctcu0
2. Download this, and copy it to sd_card.
http://www.designgears.com/roms/cognition/Cognitionv4.3.1.zip
3. Use this tool to flash back to 2.1 (don't master clear)
http://forum.xda-developers.com/showthread.php?t=731989
4. Remove battery, hold vol up + vol down + power and reinsert battery. Phone will boot into recovery mode.
5. In recovery select "reinstal packages". Then reboot
6. If phone reboots back into a the same recovery, repeat 5
7. Phone should boot into a custom recovery.
8. Select install zip -> choose zip -> Cognitionv4.3.1.zip -> install
9. Reboot
Click to expand...
Click to collapse
this is horrible advice for someone running 2.2. 2.2 brought 3e recovery which does not allow flashing 'update.zip' any more.
all the OP was looking for was how to root.
SuperOneClick 1.7 will take care of that in the RAGE method....
Pirateghost said:
this is horrible advice for someone running 2.2. 2.2 brought 3e recovery which does not allow flashing 'update.zip' any more.
all the OP was looking for was how to root.
SuperOneClick 1.7 will take care of that in the RAGE method....
Click to expand...
Click to collapse
Thanks for the Rage part. Keep forgetting that, even when I use it on my phone.
So I tried superclick 1.7 and had no luck. It would say waiting for device, I'd plug in. my phone and then would say it was running, but nothing happened. Tried with debugging on and off. Any advice? Also can you direct me where to get superclick. I'm worried that the site I got it from may be malicious. Also I'm running windows 7, just in case that makes a difference.
http://forum.xda-developers.com/showthread.php?t=803682
make sure you have the drivers installed for you phone, and you have USB debugging ON....it has to be on in order for it to work
Thank you Pirateghost. Got it rooted.
Considering I know very little about all this, is there somewhere you can to direct me to get easy, step by step, directions on how to load a new rom on my phone? I got it rooted using superoneclick v1.7, loaded titanium back up and rom manager. I'm using one click lag fix, although it seems many feel that it's not good. I was thinking of going with cog4. Any suggestions? Your awesome, thanks.
Cdub3 said:
Thank you Pirateghost. Got it rooted.
Considering I know very little about all this, is there somewhere you can to direct me to get easy, step by step, directions on how to load a new rom on my phone? I got it rooted using superoneclick v1.7, loaded titanium back up and rom manager. I'm using one click lag fix, although it seems many feel that it's not good. I was thinking of going with cog4. Any suggestions? Your awesome, thanks.
Click to expand...
Click to collapse
Flashing a rom is quite simple. Obviously I'm going to be biased and suggest Andromeda3 as the recommended ROM, since I put so much time into that rom. Check out the guides and tutorials found in Q&A and development
Sent from my HTC Vision
Most all of the roms here have flashing instructions on page 1 of that thread.
And back up before you start. You can never back up too much.
Sorry about my stupidity, but people keep mentioning 3e recovery being an issue for me since I have froyo. Will odin take care of this? Also does this whole process take me back to eclair or will it still be froyo. It seems the more questions and information, the more this process its intimidating me. Just don't want to ruin my phone
Cdub3 said:
Sorry about my stupidity, but people keep mentioning 3e recovery being an issue for me since I have froyo. Will odin take care of this? Also does this whole process take me back to eclair or will it still be froyo. It seems the more questions and information, the more this process its intimidating me. Just don't want to ruin my phone
Click to expand...
Click to collapse
yes odin will fix this in about 5 seconds or less!
before you start disable lagfix! this is important! but speed mod may just work be cause it has similar lagfix options available in the kernel. still wouldn't try it though.
recovery is part of the kernel. grab a kernel in .tar format. speedmod is great for this
open odin (not one click but full version) put .tar of kernel in pda slot
put phone in download mode (if 3 button is broke you may want to flash back to 2.1 with 3 button fix or another rom with 3-button fix via odin) you can access download mode via use of adb in the mean time.
plug in phone, make sure auto reboot is selected and reformat is not selected.
the left most box in odin should turn yellow. hit start. it takes about 3 seconds. phone will reboot with new kernel all data will be intact.
at that point you can enter recovery mode which will be cwm. you can root from cwm or install a rooted rom that will include another kernel.
kernel flashing doesn't effect data or settings or version number but kernel need to be same android version, eclair rom needs eclair kernel, froyo needs froyo ect. but a 2.2 rom can run 2.2.1 kernel and vice versa. same goes with 2.3 and 2.3.3 ect. also samsung tw roms need tw kernels, sense roms need sense kernels and aosp roms need aosp kernels. and of cource the kernel should be for you phone.
Speedmod is an i9000 kernel, if you want to just root and use stock froyo you will have to flash am I9000 modem.bin or there will be sound issues...
Use the 3e recovery push. Had to use on Vibrant.
Sent from my SAMSUNG-SGH-I897 using XDA App
studacris said:
Speedmod is an i9000 kernel, if you want to just root and use stock froyo you will have to flash am I9000 modem.bin or there will be sound issues...
Click to expand...
Click to collapse
true but you can flash a different kernel afterwards.
if the op want to read all about fixing 3e recovery with adb or other method fine. but a kernel swap is quick and easy.
Dani897 said:
true but you can flash a different kernel afterwards.
if the op want to read all about fixing 3e recovery with adb or other method fine. but a kernel swap is quick and easy.
Click to expand...
Click to collapse
I agree, just informing in case he stuck with a captivate modem with that kernel and couldn't understand the issues he was having.
so i did this, and on odin it says it passed and that it was successful, but when i check my kernel, it doesn't say speedmod. it's just the same stock kernel. I don't have kies, I have kies mini. Don't know if that's the prob. I'm in the US and I didn't think you could get the full kies. My drivers said there was an error, saying the I9000 drivers didn't work. I downloaded the kernel version specific for the ATT captivate sgh-1897. I downloaded the odin version, not the cwm version because that is what the instructions on the tourist in paradise site said to do. what now? I honestly think all I need is the kernel. I'm just looking to make my phone run faster and try to get the most out of my battery.. speedmod kernel seems right up my ally. I don't think I even need to mess with a ROM. So will this not work with kies mini? any help is appreciated
Cdub3 said:
so i did this, and on odin it says it passed and that it was successful, but when i check my kernel, it doesn't say speedmod. it's just the same stock kernel. I don't have kies, I have kies mini. Don't know if that's the prob. I'm in the US and I didn't think you could get the full kies. My drivers said there was an error, saying the I9000 drivers didn't work. I downloaded the kernel version specific for the ATT captivate sgh-1897. I downloaded the odin version, not the cwm version because that is what the instructions on the tourist in paradise site said to do. what now? I honestly think all I need is the kernel. I'm just looking to make my phone run faster and try to get the most out of my battery.. speedmod kernel seems right up my ally. I don't think I even need to mess with a ROM. So will this not work with kies mini? any help is appreciated
Click to expand...
Click to collapse
speedmod might not change the kernel version in about phone, some devs do not change that.
use the 3 button combo to get into recovery mode, does it boot into cwm with green text? if it did you are running speedmod.
also when phone boots it will say sgh-i897 on a black splash screen after the att param.ifs splash screen
if you still have blue samsung 3e recovery and no black galaxy s splash screen there was a problem.
So I do get a different screen when phone fires up. It does say sgh-1897 which is different than before, I can't seen to get the 3 button recovery thing to happen though. Hope it's right, just thought my phone would be faster. Seemed faster with oneclick lag fix. Guess I'm crazy. The phone does seem louder when it fires up, which I read this kernel helps make happen. Is there another way to get to recovery to see if the 3e issue is fixed. If so is there another kernel that would be faster for me or do I need to do the ROM thing next. Also, since I didn't think this worked I tried to install oneclick lag fix again, but couldn't because there wasn't enough space.does this mean speed mod went through. I also did the speed mod flash like 3 times thinking that it wasn't working. is that as problem? Sorry for all the questions. I'm just new to all this and I don't have much computer savy either. Thanks for putting up with me.
ok so you do have speedmod.
for recovery, with phone off, press volume+volume for 2 seconds
continue to hold volume and press power, holding all three till the first splash screen pops up then release.
first decide if you want to keep speedmod, you can root in recovery and flash to a different kernel after, can also flash a new rom now.
speedmod is an i9000 port. it may not work perfect with the kb1 modem. if you flash kc1 modem it will not work with bluetooth calling. i use it as a tool to flash other roms, to root, and to flash other kernels and not deal with 3e, that is the point of me suggesting it. but giving up bluetooth calling isn't a big sacrifice to some people and many do use it like you are.
now if you want speedmod and lagfix you can do that in recovery, speedmod has a universal lagfix. disable this before flashing a voodoo kernel (or stock) if you change it later.
the lagfix has the options to set data, dbdata, or cache to ext2,ext3,ext4,ext4 non journalling, or jfs
it can also set /system to ext4
voodoo settings are /system=ext4
/cache=ext4nj
/data=ext4
/dbdata=ext4
these are the most common settings and are very successfull.
feel free to pm me with questions, rom recomendation, ect...
edit, just noticed you already have root via rageagaintthecage method via superoneclick, i always forget about that on the sgs though i have done it on an evo the hard way a while back, now we have superoneclick so it's not hard anymore. you can install a market app called sgs kernel flash and experiment with kernels that way. prolly what i'd have told you if i read the whole thread.
Okay. I have read quite a bit on this forum regarding the ROMs and CWM. I have rooted my phone and am looking to add Gummy Charge. I have never done this with a phone and the rooting process was nerve racking knowing what could be the consequences. I use this phone for work, but would like to enjoy it while I have it.
As I said, I have read quite a bit, but am still confused. I have a few questions:
1) Define flash.
2) I have dowloaded the following files:
- GummyCharged_FE_1.9.1_FullOdin.tar.md5.7z
- 0817_charge_recovery.tar.md5
- Voodoo-stable-5.5-Froyo-GT-I9000-odin-pda.tar
Are these the files I need for this process?
3) What order to add these to the phone through Odin?
4) Once these are added, do I start up after each install?
I think this will cover it for now.
I appreciate everyone's time and hope this is not a repeat series of questions. I really appreciate all developers and the time they have spent putting all this together for our benefit.
Scott
K so forget the i9000 file all together. Actually just delete it before you really screw something up.
Flashing is the act of overwriting system partitions with alternate firmware. Thats my best shot at a clear def.
On to the rest. Be sure youve got odin set up properly drivers and all.
Now all youve got to do is flash the gc1.9 odin package. Let boot. Go back to download mode then flash recovery in odin and let the phone boot.
Ps you may not need to flash the recovery in odin but i can't remember if that gc package includes one do you might as well just do it....
Also I believe that package includes a voodoo kernel so it could take quite a while to boot up the first time..
Happy flashing my friend!
Sent from my Gummy Charged GBE 2.0 using XDA App
Thank you for your quick response.
I'm assuming I have all the drivers for Odin since I used it for the rooting process.
If there is something I may be overlooking please let me know.
You mention:
Now all youve got to do is flash the gc1.9 odin package. Let boot.
Click to expand...
Click to collapse
Is this what I use Odin for or is Odin only used to "place" the file in the phone? Are there steps that I need to do to "flash" the phone or do I just boot up and I'm now running Gummy Charge.
TacticalMonk said:
Thank you for your quick response.
I'm assuming I have all the drivers for Odin since I used it for the rooting process.
If there is something I may be overlooking please let me know.
You mention:
Is this what I use Odin for or is Odin only used to "place" the file in the phone? Are there steps that I need to do to "flash" the phone or do I just boot up and I'm now running Gummy Charge.
Click to expand...
Click to collapse
all you need to do is get the phone into download mode and connect it with Odin open on your pc, press PDA (NOT PHONE) and browse for the Gummy odin package ending in .tar.md5, place the battery back in and press start then let Odin flash the rom to your phone... when its finished unplug your phone and remove battery, then put it back in and boot the phone up (first bootup may take a while so bear with it) then enjoy your rooted and custom rom'd phone... using ClockWorkMod that installs with the rom you can then flash anything you want in the future like newer kernels or different roms
blazing through on my 4G Droid Charge
Hi. I am having trouble finding the clockwork mod for this device on this forum. I found some instrucions on the cyanogen mod forum with an oficial rom from them. Which one anyone suggest me? roms from the forum or cyanogens 7. im searching for an ics rom..
Sent from my SAMSUNG-SGH-I897 using Tapatalk 2 Beta-5
The hard way is usually what new owners of the Captivate learn, and fast, like I did over the past week or so. I ended up:
- getting the i897uckk4 Odin One Click - Stock ROM and flashing that so it was fully updated (at least as far as the AT&T stock stuff is concerned)
- located the Odin3 v1.85 flasher
- flashed the captivate-recovery-cwm5-kernel.tar onto the Captivate (it's the stock KK4 kernel with CWM 5 ready to go)
- then used CWM to update/upgrade from a bunch of ROMs, currently using Doc's Master beta v9, but I've tried about 10 ROMs in the past few days, this one is working fine at the moment aside from some ROM Control FC issues, but it's beta obviously
That should get you going. Found all the files here by searching, use the names I just mentioned above to locate them as I didn't save individual links, sorry.
Hope this helps...
Thank U Very Much
br0adband said:
The hard way is usually what new owners of the Captivate learn, and fast, like I did over the past week or so. I ended up:
- getting the i897uckk4 Odin One Click - Stock ROM and flashing that so it was fully updated (at least as far as the AT&T stock stuff is concerned)
- located the Odin3 v1.85 flasher
- flashed the captivate-recovery-cwm5-kernel.tar onto the Captivate (it's the stock KK4 kernel with CWM 5 ready to go)
- then used CWM to update/upgrade from a bunch of ROMs, currently using Doc's Master beta v9, but I've tried about 10 ROMs in the past few days, this one is working fine at the moment aside from some ROM Control FC issues, but it's beta obviously
That should get you going. Found all the files here by searching, use the names I just mentioned above to locate them as I didn't save individual links, sorry.
Hope this helps...
Click to expand...
Click to collapse
Thank U Very Much, Your guild is awesome worked the 1st time, I been trying for 3 days NOW, THANK U SO Much.
Clockwork mod is a recovery kernel replacement which allows flashing of unsigned zip files. You flash or "reinstall packages" as an update.zip from the original recovery. This roots the phone and installs Clockwork recovery.
Flashing roms without knowing the three button method to get into recovery or the button combo to get into download mode could spell trouble for people who are just learning about rom flashing.
It takes a few months of reading threads until a level of understanding is reached where you can flash roms and get out of trouble on your own.
br0adband said:
The hard way is usually what new owners of the Captivate learn, and fast, like I did over the past week or so. I ended up:
- getting the i897uckk4 Odin One Click - Stock ROM and flashing that so it was fully updated (at least as far as the AT&T stock stuff is concerned)
- located the Odin3 v1.85 flasher
- flashed the captivate-recovery-cwm5-kernel.tar onto the Captivate (it's the stock KK4 kernel with CWM 5 ready to go)
- then used CWM to update/upgrade from a bunch of ROMs, currently using Doc's Master beta v9, but I've tried about 10 ROMs in the past few days, this one is working fine at the moment aside from some ROM Control FC issues, but it's beta obviously
That should get you going. Found all the files here by searching, use the names I just mentioned above to locate them as I didn't save individual links, sorry.
Hope this helps...
Click to expand...
Click to collapse
Thanks alot..im going to try that now and se how it goes
Sent from my SAMSUNG-SGH-I897 using Tapatalk 2 Beta-5
askpcguy said:
Clockwork mod is a recovery kernel replacement which allows flashing of unsigned zip files. You flash or "reinstall packages" as an update.zip from the original recovery. This roots the phone and installs Clockwork recovery.
Flashing roms without knowing the three button method to get into recovery or the button combo to get into download mode could spell trouble for people who are just learning about rom flashing.
It takes a few months of reading threads until a level of understanding is reached where you can flash roms and get out of trouble on your own.
Click to expand...
Click to collapse
Ive been flashing for a while now. I have a galaxy fit rooted and with clockwork..i was just asking because i want to now if i do this will it take away my currently settings..since i network unlocked it and am currently using it with claro.. Im on stock rooted 2.3.5 uckk4 unlocked network
Sent from my SAMSUNG-SGH-I897 using Tapatalk 2 Beta-5
br0adband said:
The hard way is usually what new owners of the Captivate learn, and fast, like I did over the past week or so. I ended up:
- getting the i897uckk4 Odin One Click - Stock ROM and flashing that so it was fully updated (at least as far as the AT&T stock stuff is concerned)
- located the Odin3 v1.85 flasher
- flashed the captivate-recovery-cwm5-kernel.tar onto the Captivate (it's the stock KK4 kernel with CWM 5 ready to go)
- then used CWM to update/upgrade from a bunch of ROMs, currently using Doc's Master beta v9, but I've tried about 10 ROMs in the past few days, this one is working fine at the moment aside from some ROM Control FC issues, but it's beta obviously
That should get you going. Found all the files here by searching, use the names I just mentioned above to locate them as I didn't save individual links, sorry.
Hope this helps...
Click to expand...
Click to collapse
Soooo sorry to bother, but I'm at my wits end trying to root and remod my new captivate. The last one crapped out on me, so I was able to get a replacement, but I don't remember flashing it being this hard 6 months ago...lol! Anyway, here's my current stats and what I'm looking for:
Firmware: 2.3.5
Baseband: I897UCKK4
Kernel: 2.6.35.7-I897UCKK4-CL614489
Build: Gingerbread.UCKK4
I can if need be flash it back to 2.1 with Odin, but I followed your instructions, and now I'm stuck. I can't for the life of me find the captivate-recovery-cwm5-kernel file anywhere, on here or elsewhere. I don't even think the phone is rooted now, which is very strange because I was able to flash it, but anyway...any help would be greatly appreciated! Thanks in advance!!
I can't upload the Odin One Click ROM, it's too much for my current situation, but here's the captivate-recovery-cwm5-kernel.tar file:
http://dl.dropbox.com/u/19019338/captivate-recovery-cwm5-kernel.tar
MD5: 8464e7cee89c7364d62b760c28a4ca73
File size: 6,359,040 bytes
and here's Odin v1.85 if you don't have it:
http://dl.dropbox.com/u/19019338/Odin3_v1.85.zip
MD5: 9a81990a61454402e8714f494bb4eb68
File size: 204,173 bytes
Now, the basics are thus so pay attention:
Since Samsung is never going to release a proper ICS build for us, from what I understand - let me repeat that: from what I understand everything is working with Gingerbread bootloaders, so that's the important aspect. Before you go flashing anything, you'll need to get the Captivate OFF Froyo of any version if you're still using it. So, update that thing using Samsung Kies to the latest version which is that KK4 ROM - that's all that's required.
Once you're done that, and you're "stock" then you would flash the captivate-recovery-cwm5-kernel.tar kernel using Odin (run Odin with Admin privilege, put the Captivate in download mode, connect it, when detected, click the PDA button in Odin to load that captivate-recovery-cwm5-kernel.tar file, then Start to flash it). Once that's done you have the same kernel for KK4 but with CWM ready to go when you are with a proper GB bootloader and you're set.
The only reason I mentioned the Odin One Click above was because I did a few things that "pooched" my Captivate and soft-bricked it at one point but recovered it with Odin and the One Click when Kies couldn't do anything at all. There's a thread around here with all the Odin One Click ROMs, that's where I got mine from.
tl;dr version:
- if you're running any Froyo anything, use Kies to do the upgrade to Gingerbread, NOT the Odin One Click. Kies will update the bootloader from Froyo to GB as required (the Odin One Click was part of what caused my soft-brick, so I learned from the experience)
- if you're already running any Gingerbread ROM, you already have the GB bootloader, so you can use the Odin One Click to go to a pure stock AT&T basic clean ROM as mentioned above
- once you're "stock" use Odin v1.85 to flash the captivate-recovery-cwm5-kernel.tar so you get the same stock kernel but CWM as well
- use CWM to install whatever ROM you want from that point on making sure the ROM archive(s) and any updates or whatever are copied to the internal storage
Personal suggestion: remove the microSD card from the Captivate before doing any flashing at all. Yes it's possible to read from that device (called the external SD in CWM), I simply don't recommend it, ever.
That's about it. The Odin One Click KK4 is not rooted, iirc, I can't say for certain at this moment either way. I only used it a few times to "save" me from the soft-brick. Now that CWM is in there, I've jumped from ROM to ROM over the past week or so but Doc's Master v8 is my fall back stable one so far. Obviously when you load a ROM, look at the Apps and if you don't see SU or SuperUser, it's not rooted.
br0adband said:
I can't upload the Odin One Click ROM, it's too much for my current situation, but here's the captivate-recovery-cwm5-kernel.tar file:
http://dl.dropbox.com/u/19019338/captivate-recovery-cwm5-kernel.tar
MD5: 8464e7cee89c7364d62b760c28a4ca73
File size: 6,359,040 bytes
and here's Odin v1.85 if you don't have it:
http://dl.dropbox.com/u/19019338/Odin3_v1.85.zip
MD5: 9a81990a61454402e8714f494bb4eb68
File size: 204,173 bytes
Now, the basics are thus so pay attention:
Since Samsung is never going to release a proper ICS build for us, from what I understand - let me repeat that: from what I understand everything is working with Gingerbread bootloaders, so that's the important aspect. Before you go flashing anything, you'll need to get the Captivate OFF Froyo of any version if you're still using it. So, update that thing using Samsung Kies to the latest version which is that KK4 ROM - that's all that's required.
Once you're done that, and you're "stock" then you would flash the captivate-recovery-cwm5-kernel.tar kernel using Odin (run Odin with Admin privilege, put the Captivate in download mode, connect it, when detected, click the PDA button in Odin to load that captivate-recovery-cwm5-kernel.tar file, then Start to flash it). Once that's done you have the same kernel for KK4 but with CWM ready to go when you are with a proper GB bootloader and you're set.
The only reason I mentioned the Odin One Click above was because I did a few things that "pooched" my Captivate and soft-bricked it at one point but recovered it with Odin and the One Click when Kies couldn't do anything at all. There's a thread around here with all the Odin One Click ROMs, that's where I got mine from.
tl;dr version:
- if you're running any Froyo anything, use Kies to do the upgrade to Gingerbread, NOT the Odin One Click. Kies will update the bootloader from Froyo to GB as required (the Odin One Click was part of what caused my soft-brick, so I learned from the experience)
- if you're already running any Gingerbread ROM, you already have the GB bootloader, so you can use the Odin One Click to go to a pure stock AT&T basic clean ROM as mentioned above
- once you're "stock" use Odin v1.85 to flash the captivate-recovery-cwm5-kernel.tar so you get the same stock kernel but CWM as well
- use CWM to install whatever ROM you want from that point on making sure the ROM archive(s) and any updates or whatever are copied to the internal storage
Personal suggestion: remove the microSD card from the Captivate before doing any flashing at all. Yes it's possible to read from that device (called the external SD in CWM), I simply don't recommend it, ever.
That's about it. The Odin One Click KK4 is not rooted, iirc, I can't say for certain at this moment either way. I only used it a few times to "save" me from the soft-brick. Now that CWM is in there, I've jumped from ROM to ROM over the past week or so but Doc's Master v8 is my fall back stable one so far. Obviously when you load a ROM, look at the Apps and if you don't see SU or SuperUser, it's not rooted.
Click to expand...
Click to collapse
Thanks dude... I only have one question in all this. I network unlock my phone when it was on eclair, i updated to ginger via kies and it stayed unlock will i loose the unlock if i installed cmw and any rom?
Sent from my SAMSUNG-SGH-I897 using Tapatalk 2 Beta-5
Jose0726 said:
Thanks dude... I only have one question in all this. I network unlock my phone when it was on eclair, i updated to ginger via kies and it stayed unlock will i loose the unlock if i installed cmw and any rom?
Sent from my SAMSUNG-SGH-I897 using Tapatalk 2 Beta-5
Click to expand...
Click to collapse
Can't say on that respect, mine is not even being used as a phone, actually - it's basically a DAP/PMP/PocketPC for me.
Still can't find a service provider with a decent plan that I'd be willing to fork over some money for so, until I find one (if I ever do), this Captivate of mine won't even have a SIM in it.
You won't loose network unlock ever unless your EFS gets modified in anyway...
Sent from my SGH-I897 using xda premium
br0adband said:
I can't upload the Odin One Click ROM, it's too much for my current situation, but here's the captivate-recovery-cwm5-kernel.tar file:
http://dl.dropbox.com/u/19019338/captivate-recovery-cwm5-kernel.tar
MD5: 8464e7cee89c7364d62b760c28a4ca73
File size: 6,359,040 bytes
and here's Odin v1.85 if you don't have it:
http://dl.dropbox.com/u/19019338/Odin3_v1.85.zip
MD5: 9a81990a61454402e8714f494bb4eb68
File size: 204,173 bytes
Now, the basics are thus so pay attention:
Since Samsung is never going to release a proper ICS build for us, from what I understand - let me repeat that: from what I understand everything is working with Gingerbread bootloaders, so that's the important aspect. Before you go flashing anything, you'll need to get the Captivate OFF Froyo of any version if you're still using it. So, update that thing using Samsung Kies to the latest version which is that KK4 ROM - that's all that's required.
Once you're done that, and you're "stock" then you would flash the captivate-recovery-cwm5-kernel.tar kernel using Odin (run Odin with Admin privilege, put the Captivate in download mode, connect it, when detected, click the PDA button in Odin to load that captivate-recovery-cwm5-kernel.tar file, then Start to flash it). Once that's done you have the same kernel for KK4 but with CWM ready to go when you are with a proper GB bootloader and you're set.
The only reason I mentioned the Odin One Click above was because I did a few things that "pooched" my Captivate and soft-bricked it at one point but recovered it with Odin and the One Click when Kies couldn't do anything at all. There's a thread around here with all the Odin One Click ROMs, that's where I got mine from.
tl;dr version:
- if you're running any Froyo anything, use Kies to do the upgrade to Gingerbread, NOT the Odin One Click. Kies will update the bootloader from Froyo to GB as required (the Odin One Click was part of what caused my soft-brick, so I learned from the experience)
- if you're already running any Gingerbread ROM, you already have the GB bootloader, so you can use the Odin One Click to go to a pure stock AT&T basic clean ROM as mentioned above
- once you're "stock" use Odin v1.85 to flash the captivate-recovery-cwm5-kernel.tar so you get the same stock kernel but CWM as well
- use CWM to install whatever ROM you want from that point on making sure the ROM archive(s) and any updates or whatever are copied to the internal storage
Personal suggestion: remove the microSD card from the Captivate before doing any flashing at all. Yes it's possible to read from that device (called the external SD in CWM), I simply don't recommend it, ever.
That's about it. The Odin One Click KK4 is not rooted, iirc, I can't say for certain at this moment either way. I only used it a few times to "save" me from the soft-brick. Now that CWM is in there, I've jumped from ROM to ROM over the past week or so but Doc's Master v8 is my fall back stable one so far. Obviously when you load a ROM, look at the Apps and if you don't see SU or SuperUser, it's not rooted.
Click to expand...
Click to collapse
Thank you SO much for the links and all the time you put in to the explanation. I followed your suggestions, and now I'm running ICS Cyanogenmod 9 in dazzling full color!! You've made what could potentially be a very complicated process extremely easy...I wish I could thank your post 10-fold!! How is your ROM on battery life, btw? I was running CM 7 on my other Captivate, and it wasn't all that great on the battery...waiting to see how 9 works, but my girlfriend still insists it was because I had "too much junk" on the phone...lol! Thanks again!!
Battery life using Doc's Master v8 is as expected, didn't do any extended testing with the CM9 nightly, but then again I'm on the original Samsung stock battery too so, it doesn't hold a full charge anymore like a brand new one would.
I'm hoping to get some cash together soon to get that Anker 2-pack w/charger on Amazon (the 1800 mAh batteries that everyone raves about). I thought about getting the 3500 mAh monster extended on off eBay but, as I'm still trying to locate that Trident Cyclops case (which you just sent me 2 PMs about, thanks), I figure having 2 batteries instead of one would still be a more efficient solution while still being able to keep the Captivate in a nice protective case.
Maybe I need to do some guides for people and put up a donate button to get me some batteries and that case, who knows.
Glad the instructions proved useful.
br0adband said:
Battery life using Doc's Master v8 is as expected, didn't do any extended testing with the CM9 nightly, but then again I'm on the original Samsung stock battery too so, it doesn't hold a full charge anymore like a brand new one would.
I'm hoping to get some cash together soon to get that Anker 2-pack w/charger on Amazon (the 1800 mAh batteries that everyone raves about). I thought about getting the 3500 mAh monster extended on off eBay but, as I'm still trying to locate that Trident Cyclops case (which you just sent me 2 PMs about, thanks), I figure having 2 batteries instead of one would still be a more efficient solution while still being able to keep the Captivate in a nice protective case.
Maybe I need to do some guides for people and put up a donate button to get me some batteries and that case, who knows.
Glad the instructions proved useful.
Click to expand...
Click to collapse
Could any one give me a link to the cm9 ics. I recently flashed aokp and dark night but couldnt use my phone as i got a no network message and when try to ad apns settings were not saving :/
Sent from my SAMSUNG-SGH-I897 using Tapatalk 2 Beta-5
http://goo.im/cm/captivatemtd/nightly
Bottom of the list, and apparently a new nightly was just posted a short time ago (20120412) so... time for a backup and a flash to see what's changed.
And also remember to get the latest Gapps from that site as well when flashing CM (which is 20120317)
http://goo.im/gapps
There was a link to one a while ago but the link is broken now. Can anyone help me get a program for my Mac? My Captivate's version is 2.1 so yeah. Thanks guys!
P.S. If you could help me update it to the latest firmware after 2.1, that would be awesome! I've been trying for so long.
Kies
I believe the most secure way of updating the phone would be through the Samsung Kies software
Kies for Macbook :
HTML:
org.downloadcenter.samsung.com/content/SW/201112/20111209105858172/KiesMac_1.3.0.12062_4_1.dmg
I would suggest that you look into downloading one of the Heimdall-based one-click files here, specifically the one in the "I897UCKH3 Android 2.3.4 Gingerbread" section labeled "With Bootloaders - Link 1 / Link 2 [With CWM Injected Kernel from Boog]". That will flash your phone with the Gingerbread stock rom (the most current Android version officially released for the Captivate), with a kernel that will give your phone root capabilities and ClockworkMod Recovery.
Heimdall works on Mac, unlike Odin.
One quick note - if you do flash that file, MAKE SURE TO BACK UP ALL OF YOUR APPS/PICTURES/MUSIC ETC.. I emphasize that because when you flash the stock rom you'll lose all of your apps, and if something bad were to happen during the flash, there is a chance (albeit a small chance) that you could hard brick your phone. This is because that file flashes bootloaders.
Just makes sure you have a good cable and good connection to your phone and you should be fine.
How to root the SGH-T769 Galaxy S Blaze 4G from T-Mobile
if you are running Android 4.0.4 Ice Cream Sandwich​
**As always, I am NOT responsible for any bricked or broken devices. These steps worked for me, but are NOT guaranteed to work for you. USE AT YOUR OWN RISK**
STEPS
You must first downgrade your phone to Gingerbread
Back up all the data on your Blaze and perform a factory reset. If you do not do this, you will have issues with the setup wizard force closing (voice of experience)
Download Odin here and extract the file. Open Odin.
Go to SamMobile's Firmware Page
Register with SamMobile (it's free) and make sure you are logged in to continue
Enter your device (Blaze 4G is T-769)
In the chart at the bottom, click July 2012 Version 2.3.6
Follow the directions on the page to download the Gingerbread firmware
Extract these files
Download the PIT
In Odin, hit PIT and use the PIT file you just downloaded
Hit PDA and put in the .tar you downloaded from SamMobile
MAKE SURE YOU ONLY HAVE AUTO REBOOT CHECKED AND NOTHING ELSE
Put your device into download mode (instructions here)
Odin should say "Added!"
Hit START to begin flashing
The phone will reboot on its own when flashing is complete
Check the firmware version in the "About Phone" section in Settings to make sure you are now in Gingerbread 2.3.6
You have now downgraded your device.
Now you need to flash the rooted kernel. Follow the instructions here.
You should now be rooted!
Good luck! I wish you all the best!​
msohsonice said:
I just had to replace my rooted Blaze through insurance because phones and water don't mix.
I'm trying to root the new one I just got, but I am running into a lot of issues and would really appreciate some help.
The old phone was running Gingerbread and I was easily able to root it with Odin. It took only a few minutes.
The new one, however, is not so nice. Here is a list of what I've tried:
Tried rooting with Odin
Realized I was flashing the Gingerbread version and soft bricked the phone where it wouldn't go past the boot screen (bar fully loaded and then would do nothing else)
Reverted to stock ICS
Searched for 3 days and nights to find an ICS version to flash
Supposedly found a few, but each time they soft bricked the phone and I had to re-flash the ICS stock
Downgraded to Gingerbread so I could flash the version in Odin that I knew worked
The downgraded version was buggy and the phone wouldn't go past the first step of the setup wizard
Repeated steps 5-7 all night long before giving up and asking for help
I've tried all k0nane's tutorials, read through a ton of XDA threads, tried Blz3r, and tried downgrading using firmware on SamMobile.
Fingers crossed someone will help me :fingers-crossed:
THANKS IN ADVANCE TO YOU WONDERFUL PEOPLE ON XDA
Click to expand...
Click to collapse
try following this thread:
http://forum.xda-developers.com/showthread.php?t=1917570
which will bring you back to stock 2.3.6 and then re-root following K0nane's thread precisely.
If you can get a root kernel and CWM, you'll be golden.
Nice write-up
It's curious though, as I never had an issue just ODINing the cwm recovery from here and being good to go - regardless of being on GB or ICS. That being said - more than one way to skin a cat and all that
dwitherell said:
Nice write-up
It's curious though, as I never had an issue just ODINing the cwm recovery from here and being good to go - regardless of being on GB or ICS. That being said - more than one way to skin a cat and all that
Click to expand...
Click to collapse
I used those exact instructions and had nothing but issues. I swear I have grey hairs now from the stress of almost bricking my brand new device
msohsonice said:
I used those exact instructions and had nothing but issues. I swear I have grey hairs now from the stress of almost bricking my brand new device
Click to expand...
Click to collapse
LOL well that's no good! Well, like I said - a number of ways to reach that ultimate goal. My comment was more based on the fact that I am genuinely curious as to the variability in outcome seen with things like this (it happens across devices even). Really the important thing is attaining that goal - so kudos to you for the nice write-up on another method of getting there Now you just need to grab some tweezers and remove the evidence of a struggle lol
Nice! I've always just ODIN'd back to GB, I've always been curious on how to root ICS
Hi I want to unlock my t mobill samsung sgh t 769
could you Help me ?