Database Info

HTC Desire USB/BT/FM Issue - who is involved

Hi there,
as you may know, some owners of a desire have an issue with their USB/BT/FM functions. For example only fastboot works but no adb / mass storage ...
So, i thought opening this thread to collect your issues, please post the following informations:
Bootloader Infos
Rooted or not
Which rom
Have you used mass storage switch in recovery
Do you use a2sd or a2sd+?
If there are enough answers i will send the collected infos to paul from modaco, who tries to adress the issue.

no usb-bt-fm
bootloader 0.75
original rom 1.15.405.4

when does it happen for you

Also posted om Modaco
Bootloader 0.75
Stock ROM 1.15.405.4 Rooted + App2sd + dalvic
Yes, I used Mass storage in recovery
Issue startet when I transfered the MCR custom fra PC to phone via recovery

I loaded a rom amended with root permissions, not happy I restored everything to its original state with the 1.15.405.4 but now no longer works usb-bt - FM ... and access to most recovery so I can not load the rom recovery .. . Help

From what i know the guys looking into this have problems to dress the trigger of the brick, so all infos on how and when ar great

Bare in mind that the rooting process was at your own risk: no-one (HTC or Paul) will take responsibility if features are no longer working.
Personally, everyone works fine on mine including adb/mass storage. I don't actually see why it'd break.
OP, what OS are you using? I had to add some udev lines into Ubuntu as otherwise adb would work but Mass Storage would fail (on my netbook, even adb wouldn't function without adding the android rules).

I know it's our risc, but hey without some investigation no progress, right?
Btw. Paul is looking into this but no ETA for now

I had exactly the same issue as you lot, only difference was that my new rom flash was interrupted by me knocking the phone and the battery falling out!
I was on evil's 1.0 and decided to change to his 1.1. In the middle of the phone formatting during the flash, I knocked the phone and the battery dislodged causing it to lose power. I had the sd card formatted and was already using a2sd. Turning it back on and restarting the root process from step 1 on Tiny Core Linux got me back with a semi working phone. I had no BT, no SD card, and didn't check the FM radio. It also started to lose signal and would require a reboot to get it back.
I tried unrooting it using paul's method and it was still the same. I just took it back to the shop and acted stupid. They gave me a brand new boxed one, no questions asked I'm scared to try flashing again now though lol.

0.75
Modaco R2 with A2SD+
Yes i have used USB-MS (still works)
no usb connectivity from within android.... but adb works

Bootloader 0.75, tried a few different ROMs (primarily eViL's, tried some MoDaCo), and I've definitely mounted the SD from within recovery. Every single ROM swap I've done was accompanied with a full wipe and SD partition afterwards.
So far I guess I've just been lucky. USB still works, though it can take a long damn time to get recognized in Windows if I'm syncing through the Desire; if I take the SD card out and pop it in a reader, it pops up instantly.
So: .75, lots of ROMs, definitely mounted SD from recovery, always full wipe and format. No issues. Supremely lucky, apparently. :/

Hboot 0.80 o2 Germany ModacoCustomRom r3.
Today after reflashing MCR3! Before all was very well the only thing was that iwasnt able to mount my sdcard without a witget!

Bootloader 0.75
MoDaCo r3 Rom with app2sd+
I used Mass storage in recovery
Issue startet after I flash the jit patch,it can't use recovery again

Can you all confirm that you had a boot loop at some point during your flashing?
The conversations on Modaco now have me convinced that this is triggered when you go through a boot loop of three cycles.

Loccy said:
Can you all confirm that you had a boot loop at some point during your flashing?
The conversations on Modaco now have me convinced that this is triggered when you go through a boot loop of three cycles.
Click to expand...
Click to collapse
yes,I think it's,but have a solution now?

miyu-hitori said:
yes,I think it's,but have a solution now?
Click to expand...
Click to collapse
No, not for those who've been bitten, but I think the rule for those of us still flashing is:
1) Flash rom (or update.zip for kernel, make changes to system, etc) in recovery
2) reboot
3) immediately do adb logcat on your PC and watch first boot like a hawk
4) if logcat reveals that your device is bootlooping, PULL THE BATTERY IMMEDIATELY. Reboot into recovery (which should count as a "successful" boot, and reset the counter) and flash a known good ROM, restore your backup, whatever.
Fixing those phones that are dead is unfortunately a task for a greater mind than mine.

[q] help flashing freinds g1

I said I would flash cyanogenmod on a friends G1 because he was fed up with 1.6. I've flashed many custom ROM's on several different devices before but I've made a mess of things with this G1 and I can hardly hand back an unusable phone so I would really appreciate your help.
I rooted the phone using Androot, backed up the apps and settings using titanium backup and then the texts using a text backup app. I then downloaded Rom manager and flashed the latest clockworkmod recovery. Next I downloaded the latest official cyanogenmod rom for the dream/g1 and placed it on the phones SD card using my computer. I then re-opened rom manager and used it to select the zip file from the sd (to flash it) on prompt I checked two boxes one to wipe data and one to wipe the dalvik cache and pressed ok.
The phone rebooted into the recovery wiped the stuff, supposedly flashed the rom and rebooted. However it got stuck on the t-mobile g1 boot screen(it never showed anything else first or anything after) I left it for ages with no joy. I then tried wiping from the recovery and flashing again - same thing so i put cm5 on and tried flashing that. Same problem. Then i realised that it probably would not work because I would need to use DangerSPL as the /system partition is too small on the dream/g1. To be honest at this point I can't be bothered with to do that and this guy will be happy with anything above 1.6 to be honest so I thought I would try and flash CM4 because that's based on Eclair I believe (and so it not require I use DangerSPL or any other method to repartition the NAND). However, I tried it twice and still no luck.
At this point I'm somewhat panicking as I cannot seem to make the phone boot and it isn't even mine! Is anyone able to help?

Anyone? Please?
Look, at this stage I will forget custom roms etc. If anyone can tell me the easiest way to get this phone booting android again i would be very grateful.
Even if you could just tell me exactly how to restore it to stock 1.6 from here?
I have flashed roms on phones before - never had a problem but this is driving me crazy - please help!

wollac11 said:
Hi I said I would flash cyanogenmod on a friends G1 coz he was pissed off with 1.6 but im having trouble and I can hardly hand back an unusable phone so i really need your help.
I rooted the phone using Androot, backed up the apps and settings using titanium backup and then the texts using a text backup app. I then downloaded Rom manager and flashed the latest clockworkmod recovery. Next I downloaded the latest official cyanogenmod rom for the dream/g1 and placed it on the phones SD card using my computer. I then re-opened rom manager and used it to select the zip file from the sd (to flash it) on prompt I checked two boxes one to wipe data and one to wipe the dalvik cache and pressed ok.
The phone rebooted into the recovery wiped the stuff, supposedly flashed the rom and rebooted. However it got stuck on the t-mobile g1 boot screen(it never showed anything else first or anything after) I left it for ages with no joy. I then tried wiping from the recovery and flashing again - same thing so i put cm5 on and tried flashing that. Same problem. Then i realised that it probably would not work coz i would need to use DangerSPL coz the /system partition is too small on the dream/g1. Tbh i'm tired so I cba to do that and this guy is not that technical so he will be happy with anything above 1.6 so I thought I do CM4 coz thats 2.0 or 2.1 i seem to remember (and it not require I use DangerSPL) - tried it twice and still not luck.
HOW THE HELL CAN A GET THIS STUPID THING TO WORK AGAIN!??
MAJOR PANIC AS THIS IS NOT MY PHONE - PLEASE HELP!!!
Click to expand...
Click to collapse
Try this thread: http://forum.xda-developers.com/showthread.php?t=803482. I hope it helps.

It's been way too long since I rooted mine to be of any real help but I shall try nonetheless.
Firstly, there is a guide in the G1 forum to unroot and get back to stock firmware: Here (but note that I've never done this).
I must stress though (admittedly from memory) that if you have flashed an SPL or radio image at all, be VERY careful about the order in which you revert back to stock (or go to get a custom ROM depending on which way you decide to go). The G1 is very picky, and flashing things (mostly SPL and radio IIRC) in the wrong order will brick the device. That said, if you follow the instructions you find to the letter you should be OK. But yeah, read twice, flash once.
There is a lot of information in the stickies in the G1 forum. It could take a while to wade through but it should all be there. Failing that, post in the Q&A or General G1 subforums and I'm sure a current user will help you out.
I apologise if I've just posted a bunch of stuff you already know/have read - like I said, I've not used the phone in a while - just trying to offer what I can.

Thanks
No worries now guys i've done it! It was quite complicated but its all sorted now. If anyone is trying this and has the same (or similar) issue then pm me and I will tell you how I sorted it.
Otherwise thanks guys and you can conciser this thread:
---------------------closed--------------------------

[Q] NexusS (i9020T) hard bricked, at which step did I go wrong?

Hi everyone, I had a problem with my previous nexus s (I have since gotten a working replacement) and I was wondering where exactly I messed up so in the future I can avoid this
Here is what I did on my previous phone:
1. I flashed ics onto my device from the ota update package from androidcentral, it was 4.0.3. (This worked great and I had it on my phone for 2-3 months before I tried the next steps.)
2. I rooted my device successfully using the guide at nexusshacks.
3. I also flashed TWRP recovery (fastboot) and superuser using the above guide/links
4. When I would turn off my phone it would boot to a screen with a red triangle and an opened android bot. So what I would have to do is flash twrp recovery everytime I turned the phone on just to get it to work.
5. What I wanted to do was keep the stock rom but still have twrp recovery without it making me reflash it on every boot. So I clicked install and tried to flash the stock rom (update package from the link in step 1) with twrp recovery. It then turned off my phone and hard bricked it. I couldn't turn it on anymore and a new battery didn't fix it.
I was able to get a replacement now and I was just wondering at which step did I go wrong? I THINK that I should have wiped my cache before I tried to reflash the stock rom but maybe I'm way off base here. This is why I posted a question here so hopefully some of you guys can help.
I did think about posting in another thread, but I didn't wanna threadjack or anything... and his problem also seemed a bit different then mine. Also, sorry about not being able to provide the specific links it won't let me post them until I've posted 8 times.

I don't know for sure but team win recovery has been reported to corrupt the device's efs directory. I've even had problems myself using clockwork recovery. I've moved on to razor recovery and haven't looked back.
This is the most flash-friendly phone I've ever owned, and razor recovery rivals amon ra (which was awesome on my g1 and evo). I really think it may have just been the recovery you were using... Somebody correct me if i'm wrong.
Sent from my Nexus S 4G using Tapatalk

I had once corrupted one of the partition. I fixed to by flashing stock recovery and stock rom.
Use adam outler's unbrickable mod tool. It can be found in android development section.
Sent from my Nexus S using XDA

Thanks for the replies.
That's interesting about twrp... I didn't know that. Truth be told, the only reason I went for it over other ones like clockwork mod was because the UI looked pretty nice and easy to use. Also the guide I followed at nexusshacks used that, so I wanted to stay consistent with it.
jishnu7, it's a little late for that now however as I actually have already received a working replacement from my carrier, but in the future if something ever does go wrong (hopefully not) I will definitely check that out.
The main thing I'm wondering is if it messed up because I tried to reflash the stock rom essentially over top itself (was hoping that by doing that, it would stop making me reflash twrp on every reboot) or if it was because I didn't wipe the cache before the flash.
Also, what I really wanted to do with my phone was to keep the stock rom but be able to overclock my cpu/gpu. I was hoping I could set different overclocks for different things (I've heard of kernels where you can downclock your phone when the screens off and have it overclocked slightly while you're using it, that would be something I'd like to have). I figured to install those kernels I would have to root my phone, replace stock recovery and install superuser so that's why I tried to do that. Once again, I'm pretty new to all this stuff for my phone.

Sorry to bump this thread again, but I would really like to know how I could avoid what happened to me for the future. I think it's because I flashed the stock 4.0.3 rom over itself (was hoping that by doing that twrp recovery would stay on the phone after reboot).
What I would like to do is install something like CM9 or AOKP and use the Matr1x kernel so I could undervolt or overclock my phone.

I seriously dont get how u hard bricked your phone...
the reason you are thinking is you reflashed stock rom without wiping cache, as per my experiece its not at all the reason
now, whats my experience??
...I have some fault with my nexus device and I'm working on it,,and I did everything I could do...one of the thing out of those things was reflashing stock rom without wiping,and i did it quite a several times...my device never hard bricked,,however it was soft bricked for many times,,and i recovered from it
so reflasing a stock rom over stock rom, over ICS, over some themed custom rom,will not hard brick your device, you must be missing something none of your steps sounds suspecious
P.S:- pulling out battey while flashing something like this sounds suspecious, never tried though

I'm not sure what happened either to be quite honest with you. Since giving it another shot now with my new fresh phone I have had great success!
I did everything I wanted to do all in one go. Rooted it, install CWM touch, install AOKP (went with milestone 4 cuz I heard newest build 29 has some bugs) + gapps and installed matr1x kernel 18.5 bfs.
The only thing I did different from last time was installing CWM touch (instead of twrp) and flashed aokp this time (instead of reflashing 4.0.3 over itself).

I would just avoid step 2 at all cost.
The nexus s hacks dude is a tool.

Very unreliable TF101 and confused

Hi,
I have had a TF101 for over a year. However it was used by someone else who upgraded it 0.17 and when it came to be me was unreliable and would often randomly reboot and then get stuck on the 'EEEpad' screen (before it says ASUS etc).
I am new to Android (been on webOS for a few years) so rooting etc is new ground for me, but I am pretty technical. Had lots of webOS patches and overclocking installed.
I 'upgraded' to 0.24 and then started reading as much as I can on this site after the reboots remained. I now realise I made two fundamental mistakes
1) Going to 0.24 at all seems to be a no-no from what I'v read.
2) I didn't do a clean restart before upgrading.
I'm not too worried about staying with stock but I do need the thing not to re-boot as often (15 times yesterday !!), so I am wondering.
1) Is 0.24 on a factory reset machine better for rebooting ? If so how do I get back to that state given that I have 0.24 already so can't reset and then re-install 0.24 (as I think I should have) ?
2) Is the only way to make it reliable to go for a customised ROM/Kernel/Bootloader etc ?
3) If (2) is true and I need a different ROM/kernel etc which is the most reliable ?
I know I need to do the downgrade, root, clockworkmod etc but can probably handle that from other threads.
Many thanks for anyone taking the time to respond.

1: A factory reset *May* help, but there's problems with official ICS anyway.. I haven't tried stock ICS and have no intention of trying it with all the horrid reports I read.
2: I would say this is your best option, put a ROM on, you won't regret it.
3: You will need to flash a ROM, boot it once, then wipe caches again and flash a kernel. As for kernel IMO your best choice is Guevor's kernel, (I'm using v20.6 and it's perfect.) As far as ROM I recommend ARHD or Revolver if you like stock look, and Megatron or AOKP if you like AOSP based roms. (its all preference here)

15 reboots in one day? Have you tried a factory reset yet? That sounds excessive.
But I have zero problems with ARHD 3.4 and Guevors kernel.

As the 2 previous posters suggest - I think a factory reset could possibly help.
If not then I would root, and install a custom ROM. I'm using Revolver and stock kernel with zero RR or SOD. I tried Guevor's kernel and it just didn't agree with my particular TF-101. I also tried ARHD and it worked great but I just prefer the aesthetics of Revolver. Good luck and I sure hope you get your reboot issues fixed soon.

Many thanks for the help, I will do a factory reset.
I suspect that won't work so will look in to rooting and custom roms etc.
I gather I need to downgrade ?
I know there are instructions out there so I will go and have a look at them in preperation !
Thanks again.

rege0039 said:
Many thanks for the help, I will do a factory reset.
I suspect that won't work so will look in to rooting and custom roms etc.
I gather I need to downgrade ?
I know there are instructions out there so I will go and have a look at them in preperation !
Thanks again.
Click to expand...
Click to collapse
As you have had the unit over a year --> old serial# --> it has to be nvflash-able. So you have an option for an easy one-step installation.

Erm, OK - now I am a bit lost !
I want a rooted machine, Clockwork mod and a chance to try custom roms and kernels.
I seem to be able to find instructions for one but not the others, some want to put back stock rom but I am don't want that.
Sorry to be thick, and maybe I'm looking in a panic and getting lost but is there some instructions to follow to take it from 0.24 to being rooted and able to load custom roms. If I get to Clockwork mod I know how to use that to flash etc as I had it on my touchpad before I want completely to Android.
nv-flasable - what does that mean ? Can I check my serial number to know I can do it ? Stickers seems to have come off so not sure I know serial
Sorry for sounding confused and not looking enough - I really have tried but can't seem to get instructions that go from where I am to where I need to be !!!
Thanks again.

NvFlash
NvFlash is a utility that older tabs (With Sbkv1) can use to easily flash a recovery on the system. ASUS has basically two passkeys for the TF101 to get into APX mode, Sbkv1, and Sbkv2. Sbkv1 is the passkey everyone has, and Sbkv2 is currently unknown/locked. What Sbk you have is based on the serial number of your tablet (you can look at the box if you still have it, or find the stickers, also when did you purchase the tab, if it was before July 2011 then you for sure have Sbkv1, if not it may be Sbkv2) If your serial number starts with B60 or below (B50 B40 etc...) it has Sbkv1, if it has B70 or higher, it has Sbkv2. Find out what Sbk you have (it should be version one) then download NvFlash from Rayman's thread. Search nvflash unbricking released in the development forum. Once you have that get an NvFlashable recovery (I recommend Rouge XM touch recovery 1.5, since it reads from internal and external memory, again search in development.) Boot your tablet into APX mode and connect to your computer (Turn off, hold Volume-UP and power.) Install the driver, then follow instructions from NvFlash thread to flash the new recovery. Once you have this, you can place a ROM on your tab (All roms are pre-rooted, no need to install superuser) boot into your new CWM recovery with Power + Volume-DOWN, then press Volume-Up after a few seconds. Wipe data/factory reset, wipe cache, wipe Dalvik-cache, install zip from... find your ROM.zip (don't extract it) and install! Then reboot and let it install, after booting once, you can go back into CWM recovery to install a kernel.zip that you also place on your tab (I recommend Guevor's kernel, make sure you wipe cache and dalvik-cache again.) Then you're all set!
Any other Q's?

Ok. I think I follow all that. Many, many thanks.
I will go to work tomorow and look for the box, but I'm pretty sure it was bought before July 2011.
Need to do something, sure it's cos I am now counting but today held the record at 29 reboots ! Four within 8 minutes at one point.
I think I will go Android Revolution and the kernel you mentioned.
Would be great to bo rooted as I have Titanium license as well.
Thanks again. webOS forums were always good, XDA proving so as well.

Nvflash was just released for Sbkv2, so just use NvFlash, it's easiest good luck!

Thanks for following this up with the latest news !
As far as I can see the wheelie setup is for LINUX only ?
I'm on Windows 7, I could set it up as a dual boot but am complete newbie at Linux !

It's not that bad to set up, just download virtualbox from Oracle, then an ubuntu.iso installation, and run it as a virtual machine within windows. Easier than dual boot. It isn't too hard to set up, essentially download and extract.

So ...
Good news is got it rooted, clockworkmod installed (using the Rogue version that was suggested) and then went installed Android Revolution latest version. Did all the required resets, dalvik and cache wipes etc.
Great I, thought, until ...
All day to day it has rebooted frequently even though I installed no other s/w - just what comes with Android Revolution. It seems to more frequent when the device has powered down after a period of inactivity.
Is it now time to start thinking this is a h/w problem ?
Will a different custom ROM be worth a go or would a different kernel help (which I haven't tried yet) ? If so I wasn't sure which version of the suggested kernel (Guevors) I should go for as there seemed to a lot of them.
Once again, thanks for any and all time. NVFlash was a revelation and really not that hard once I had the drivers installed.

Have now installed v21 of the kernel and got CPU tuner to change minimum cpu speed, wasn't sure about voltages.
Is there a recommended way to set cpu speed, governors and voltages ?
At the point of thinking this will never be stable again. Not even getting 30 minutes without a random reboot.

Try version 17c of guevor's if 21 is giving you issues, and any Cm9 based build will have overclock change built in. I don't use overclock apps, they give me problems. Make sure you SuperWipe, then try reinstalling ARHD (or a aosp/aokp/etc rom) flash either 20.1version6 guevor or 17c and don't overclock (default it overclocks a bit to 1200). See if it is finally stable, if not you might have borked hardware :/

It's charging at the moment, after I night of rebooting I presume.
I've got the SuperWipe zip so I will run that (which I didn't before but did do a reset, cache and dalvik wipe) and then put Revolution on after that.
I looked at Megatrons ROM as well - any comments on its reliability ?
I've not noticed it only does it when the device has been left for a few minutes. If I keep using it and don't let it sleep then things seems OK.

Megatron is really stable, I've found. I like aosp better too.

Those who experience rr or SoD can downgrade via nvflash to Any custom rom , prime 1.4 for example, and then upgrade by way of cwm to an ics aopk to make those problems disappear?
EDIT: megatron is very stable and have an awesome battery life. And the pop ups telling us there's a new update is great too
Sent from my Transformer TF101 using XDA Premium HD app

Hi,
Have been away with unreliable internet access but am now back.
I'm starting to think there must be a h/w problem as nothing seems to make the thing stop rebooting. The only pattern I can see is that if the device is being charged (either from the mains or by being plugged in to the keyboard) then it seems to stay up. Not sure if a certain battery level makes a difference.
I went through the whole SuperWipe clean and Revolution install, then put on the 17c kernel (At least I think I did About shows 2.6.39.4-g8fc25a9-dirty for the kernel, is that right ?) and am still have lots of reboots.
Tried Megatron with the same kernel and couldn't get wifi but still got a couple of reboots.
Any other suggestions ?
Or does anyone know a way of getting repairs done on this in the UK ?

You'll want to RMA to ASUS if nothing works :/

(Q) Rogers Infuse 4G - successful rooting - lag fix fiasco

Good morning,
While not a noob to rooting or flashing (currently active on Galaxy tab 2 boards) I appear to have made a noob mistake, and even though I searched and read stickies, etc - still made the mistake.
I rooted the Rogers Infuse 4G using this thread http://forum.xda-developers.com/showthread.php?t=1197248 and it worked without issue.
Decided to try the enable lag fix option - deleted the voodoo file on the sd card, and rebooted the phone. Phone got stuck on SAMSUNG screen (unfortunately - did not notice that the volume was off on the phone) and I did not hear the "voice" telling me what was going on - so rebooted the phone by holding the power button until it rebooted.
Spent a couple of hours after that re-reading, and since I was able to get into download mode - was able to reflash stock package through odin. When the phone did finally reboot (thankfully, as this is my daughter's daily driver) I noticed there was already a voodoo file on the sd card, with another file inside named "logs" Just in case, I deleted that file, and added a new one called "disable-lagfix" as per the original instructions.
Just to be sure - went back and ran the rooting procedure, and can confirm that we have root.
From there, I decided to flash the 100% working CWM Recovery file through Rom Manager - found the details on this thread http://forum.xda-developers.com/showthread.php?t=1107881 and can confirm that after rebooting into recovery - the phone has CWM Version 2.5.1.2
The phone is currently fully functional, no issues with network or wifi, playstore, etc - but would like to know if anyone can confirm that we are good to go should we decide to upgrade to a custom rom. I've done so much reading - that the recovery version confuses me ( red or blue, etc). I realize that some of the threads are back from early to mid 2011 - so not sure if they are still completely valid - so am asking before proceeding.
Phone settings are the following:
Kernal 2.6.35.7-I997RUXKG3-CL366622
Build GB.UXKG3
Baseband I997RUXKG3
Firmware 2.3.3
CWM 2.5.1.2
Currently have the voodoo/disable-lagfix file on the sd card
If anyone has gotten this far into the thread - and can offer up some feedback or recommendations - it would be appreciated
Thanks in advance,
Bill

I usually don't trust Rom manager, but if you are able to boot to recovery then I would say you are good.
If you want the red one (don't remember the version) you could flash a custom kernel with sgs kernel flasher (available on play store).
Infusion should work for you

andros11 said:
I usually don't trust Rom manager, but if you are able to boot to recovery then I would say you are good.
If you want the red one (don't remember the version) you could flash a custom kernel with sgs kernel flasher (available on play store).
Infusion should work for you
Click to expand...
Click to collapse
Thanks for the reply - appreciate your time
Guess it's time to turn that volume up, delete the voodoo folder, and cross my fingers....
Just to confirm - do I delete the voodoo folder itself, or the disable-lagfix folder inside the voodoo folder only ?
Again, thanks
:good:

What were you planning on flashing?
You can probably leave it there for now, and after you have flashed then you can dispose of the folder.
Sent from my Transformer using xda app-developers app

andros11 said:
What were you planning on flashing?
You can probably leave it there for now, and after you have flashed then you can dispose of the folder.
Sent from my Transformer using xda app-developers app
Click to expand...
Click to collapse
First off andros11 - thank you so much for your time in replying to my issue.
My daughter has been looking over the development site - and,
as it stands right now, she has her mind set on the Dark Night Rom by VortexJunior.
Here is the link, if it helps http://forum.xda-developers.com/showthread.php?t=1662280
The install instructions, while relatively simple - and similar to what I am used to doing - but no mention of lagfix
Installation: From Gingerbread
1. Download Zip
2. Wipe Data/Factory Reset
3. Wipe Cache Partition
4. Flash
5. Reboot into recovery(Advanced>Reboot recovery)
6. Flash again
7.BAMM!
Thanks again for your time and replies,
Regards

Once on ICS I don't think you have to mind about lag-fix..
Also, I suggest you just reboot instead of rebooting into recovery. That often causes recovery bootloops.
When you reboot, the phone will hang at the kernel splash screen (this is normal). Just take out the battery, place it back in and boot into recovert with 3-finger combo (vol +, vol - and power, and let go when samsung logo pops up)
My personal suggestion is that you move on to JB. It performs much better, and mostly all development is now there.

Perfect - thanks
Am running CM 10.1 on my tablet, and love it
Will have my daughter research JB ROMs instead.....
Happy Holidays to you and your family
Regards,
sent from my GT-P3113 using Tapatalk 2

Lag fix??
I am confused.. what exactly is the lagg fix? My GF has a JB (one of phablet ROMS) installed and all the JB ROMS I have installed on this phone (and I think all ROMS besides JB) have had lagg problems. So I would really like to know how to fix this phone.

About that lagfix...
If I remember correctly voodoo lag fix was originally designed for the Galaxy S to change the file system it ran at to something that made the phone feel more responsive and access recourses quicker. It was ported to other ROMs so if a ROM includes it then you're ok to use it but I don't think you can just apply it to any JB ROM. Plus after using a GB ROM with this lagfix for some time, any 4.0 and above ROM I have used after that has been a LOT quicker in comparison. So I would probably look into the way you JB roms were installed maybe do a data wipe/factory wipe in CWM and reinstall the ROM from the beginning. What ROMs are you using exactly?