[Q] Grabbed Update today and stuck - Thunderbolt General

I'm still new to this and I was hoping that someone could give me some help. The phone is a rooted tbolt running stock.
I grabbed the ota update this morning. The phone reboots and starts installing the update but I get the exclamation mark with the droid guy about 40% of the way through. I power cycled the phone after the error and everything came up normally. It took a few minutes, but then the phone rebooted to try and install the update again (and fails at 40%). Seems to be a pretty annoying loop.
Has anyone else experienced this and is there any way for me to tell the phone to stop trying to update?

skeezbo said:
I'm still new to this and I was hoping that someone could give me some help. The phone is a rooted tbolt running stock.
I grabbed the ota update this morning. The phone reboots and starts installing the update but I get the exclamation mark with the droid guy about 40% of the way through. I power cycled the phone after the error and everything came up normally. It took a few minutes, but then the phone rebooted to try and install the update again (and fails at 40%). Seems to be a pretty annoying loop.
Has anyone else experienced this and is there any way for me to tell the phone to stop trying to update?
Click to expand...
Click to collapse
It's because your rooted. Th OTA can't install with the clockworkmod recovery installed. Grab the rooted OTA (google it I don't have a link) and flash that and flash the kernel via bootloader.
Sent from my rooted stock OTA MR2 Thunderbolt

After reading about the update I'm not entirely sure that I want it. Is there any way to stop the phone from trying to install the update now?

install a rom thats the main reason we root the phone in the first place

Do you have a nandroid backup? Revert to that if you do. Otherwise, the only way to get rid of that is probably going to be to flash to full RUU over again (you'll be back to 100% stock and lose data and root)

Boot into clockwork recovery and wipe cache ONLY. Might work I'm not sure, but it definitely won't hurt.
Sent from my HTC Thunderbolt

JBO1018 said:
Boot into clockwork recovery and wipe cache ONLY. Might work I'm not sure, but it definitely won't hurt.
Sent from my HTC Thunderbolt
Click to expand...
Click to collapse
Yessir, causes the update to fail before the reboot. Thanks so much!

No prob and by the way for future reference don't flash official updates over rooted phones. It's known to cause issues. Just wait for someone to post a rooted version of the update.
Sent from my HTC Thunderbolt

Related

[Q] Boot loop or Brick? HELP?

GOT IT FIXED
Thanks to fabricatedhero for the brain pulse to try and just root it!
First this isnt my G2X, I am trying to help a co-worker. She isnt Tech-savy by any means... lol... any way here is her story:
She got the OTA pop-up and thought it was a virus (yeah shes that smart) then she said she accepted the update as it kept asking. She started the update and it took hours over night and it never finished she said so she pulled the battery durring the s/w update screen. Then it started the boot loop.
Now my story:
The G2x is bone-stock
I did the NVflash successfully... Flashed the stock recovery via:http://forum.xda-developers.com/showthread.php?t=1056847 ... Still have the boot loop issue and wont boot into recovery. I searched and even Googled and everything is the same, and of which nothign is working for me.
I tried to maybe catch something from the boop loop and also from the S/W update screen... NOTHING... Clearly this is software issue; The only thing I have yet to confirm is if I place the stock update on sd card and see if itll pick that up.
The issue I see there is I cant google for the life of me what the "special" name of the update would be called. Nor do I have a clue what to really call it. I know for most phones its NOT "update.zip" more like "espring13" or somethign like that...
Can any Jedi MAster help me? Thanks!
ok found the file name:
LG-P999-V10f.zip
Still boot-looping and that didnt work...
resources
http://theunlockr.com/2011/05/23/how-to-unroot-the-t-mobile-g2x/
Use. The nvflasher to put Cwm on it and go under restore and re-format sd, cache, and etc
Then go and do gummans froyo 2.2 stock rooted rom
Also there's a post about how to do the GB update on here as well.
Sent from my LG-P999 using XDA Premium App
Did you try a simple factory reset? If you still have stock recovery and rom try holding volume up + power until the reset process begins.
G2X CM7
So I will have to root the device? I guess that makes sense...
Keep in mind I cant get into stock recovery period...
cwm worked! wipped everything, still nothing, gonna flash a new rom
update:
ok SDcard doesnt show have to mount internal storage to apply update... *crosses fingers*
**worked running newest nightly of CM7 with CWM recovery

[Q] HELP! I unlocked my ATRIX before updating to 4.5.91. What should I do?

I unlocked the bootloader to my phone then tried to install the new 4.5.91 update. I think this is the problem. I should have updated first then unlocked.
What is happening to my phone now is that while the package is installing, it stops about 1/5 of the way and shows an exclamation point in a triangle. Does this mean I bricked it?
I took out the battery and turned on my phone again but I can't use it because it automatically goes back to trying to install the 4.5.91 update. Then goes back to the exclamation point screen.
Anyone know what is happening and what I can do to fix this? Thanks!
I tried factory data reset and it fixed the problem of the phone automatically installing the update every time I turn on the phone. I can now use my phone again but what should I do about updating it to 4.5.91 gingerbread? Again, the bootloader is already unlocked. I'm also using a gingerblur rom..don't know it that might help too. Thanks!!!
phbslmgui said:
I unlocked the bootloader to my phone then tried to install the new 4.5.91 update. I think this is the problem. I should have updated first then unlocked.
What is happening to my phone now is that while the package is installing, it stops about 1/5 of the way and shows an exclamation point in a triangle. Does this mean I bricked it?
I took out the battery and turned on my phone again but I can't use it because it automatically goes back to trying to install the 4.5.91 update. Then goes back to the exclamation point screen.
Anyone know what is happening and what I can do to fix this? Thanks!
I tried factory data reset and it fixed the problem of the phone automatically installing the update every time I turn on the phone. I can now use my phone again but what should I do about updating it to 4.5.91 gingerbread? Again, the bootloader is already unlocked. I'm also using a gingerblur rom..don't know it that might help too. Thanks!!!
Click to expand...
Click to collapse
I believe that, since your bootloader is already unlocked, you could try this. Assuming, of course, you are using an AT&T Atrix. And when you're using a custom ROM on any device, it is never a good idea to install an OTA
Let me know if you need anything else.

New 3.2 update bootlooping?

OK, weird one this. Downloaded the update with no issues, it installed ok, it went to android recovery and then rebooted after a few mins into my homescreen. All good! - Then after about 5 seconds it said shutting off.. it then went through the whole updating procedure again. Ok no probs i thought, it needs 2 reboots.. fine.
However it has now done this 5 times!! and counting..I guess thats not right.. so how the hell do i stop it? lol
edit: managed to get quick view of "about tablet" and its still showing as 3.1 so the update is not applying.. i wonder why?
wingnutta said:
OK, weird one this. Downloaded the update with no issues, it installed ok, it went to android recovery and then rebooted after a few mins into my homescreen. All good! - Then after about 5 seconds it said shutting off.. it then went through the whole updating procedure again. Ok no probs i thought, it needs 2 reboots.. fine.
However it has now done this 5 times!! and counting..I guess thats not right.. so how the hell do i stop it? lol
edit: managed to get quick view of "about tablet" and its still showing as 3.1 so the update is not applying.. i wonder why?
Click to expand...
Click to collapse
Are you rooted? That would be why. It's not advisable to accept an OTA update when your system has been altered. Unlocked is ok, just not rooted/modded.
If you are rooted and have a nandroid backup from before the update, try to restore from there. If not, boot into fastboot and restore to your model's original stock image (from motodev) then let the OTA updates bring you up to 3.1 and then 3.2. Re-install CWM Recovery, and re-root after that with solarnz' Universal Xoom Root and go from there.
If you're not rooted and your system is just continually rebooting, you should still try the fastboot/restore stock images procedure. There may be something easier, but I'll let someone else advise you on that.
Good luck!
Appreciate the help. No i am not rooted but i certainly dont want to restore a stock image as i will lose everything! Its nothing that cant be restored but why should i go through the hassle after accepting an OTA update if it doesnt work!
Currently now on my 16th reboot! - Getting fed up now...
Any ideas on how to apply this update ok?.. or at least stop it! lol
wingnutta said:
Appreciate the help. No i am not rooted but i certainly dont want to restore a stock image as i will lose everything! Its nothing that cant be restored but why should i go through the hassle after accepting an OTA update if it doesnt work!
Currently now on my 16th reboot! - Getting fed up now...
Any ideas on how to apply this update ok?.. or at least stop it! lol
Click to expand...
Click to collapse
I can't think of any way to resolve this that doesn't involve a wipe of some kind. Have you checked any other Moto/Xoom forums to see if anyone else had the same problem?
My condolences on the irritating situation and the potential loss of your stuff. Actually, a good reason to root is that you can back everything up!
Well i took the plunge and wiped by unlocking. Cured the bootlooping (obviously), and so then thought - why not root aswell
All done and running Tiamat 2.2 and very happy!
Appreciate the help peeps..

[Q] Tmobile OTA Update LG G2

Hey everyone,
I just saw my phone said there was an update and with out thinking hit download and install. After a little while my phone turned off and rebooted but went into twrp. And when ever rebooting my phone goes straight into twrp. Im on stock and rooted with just a few things uninstalled. Can anyone help me out with what to do thanks!
magestic1995 said:
Hey everyone,
I just saw my phone said there was an update and with out thinking hit download and install. After a little while my phone turned off and rebooted but went into twrp. And when ever rebooting my phone goes straight into twrp. Im on stock and rooted with just a few things uninstalled. Can anyone help me out with what to do thanks!
Click to expand...
Click to collapse
Just had this happen to me to lol, spent the last three hours fixing everything and lost all my music because I didnt have a nandroid backup . Anyways just use this guide and revert back to stock rom http://forum.xda-developers.com/showthread.php?t=2432476. You'll lose root and I think I've also lost recovery but its better than just have a $600 brick.

[Q] Bricked upgrading to 5.0.1

I have had nothing but issues with this phone upgrading. Every time it bricks, the first time I got it working by reformatting DATA partition. The other times basically gave up and 2-3 days later I come back and it magically starts working again. The day that 5.0.1 came out I downloaded the FUU, well everything looked good the it gets stuck at the Android is upgrading starting apps. Since then I have redownloaded all 5.0.1 files I could find on XDA, and the same results. I tried different roms, using TWRP to wipe and rewipe and format and do it again and again. I have tried to downgrade to 4.4.2 and 4.4.4 but i get the process system isn't responding when it boots up. I am unsure what to do now, anything will help.
You flashed this RUU???
http://forum.xda-developers.com/showthread.php?t=3047103
After flashing that do a factory reset from hboot. That should get you back to a healthy stock system
berndblb said:
You flashed this RUU???
http://forum.xda-developers.com/showthread.php?t=3047103
After flashing that do a factory reset from hboot. That should get you back to a healthy stock system
Click to expand...
Click to collapse
Yes, that was the first thing I tried, but I just downloaded it again twice and did factory reset both times and I still get stuck on the "Android is upgrading... Starting apps."
dab1414 said:
Yes, that was the first thing I tried, but I just downloaded it again twice and did factory reset both times and I still get stuck on the "Android is upgrading... Starting apps."
Click to expand...
Click to collapse
So after it upgrades all apps its just sits on starting apps?
Can't hurt to run RUU again. Perhaps even4.4.4 then take the OTA for 5.0.1
andybones said:
So after it upgrades all apps its just sits on starting apps?
Can't hurt to run RUU again. Perhaps even4.4.4 then take the OTA for 5.0.1
Click to expand...
Click to collapse
Yes It gets stuck there everytime. Seems like no matter what I do for 5.0.1. When I tried to downgrade ( I did both 4.4.2 and 4.4.4) it gets the process system isn't responding error.
dab1414 said:
Yes It gets stuck there everytime. Seems like no matter what I do for 5.0.1. When I tried to downgrade ( I did both 4.4.2 and 4.4.4) it gets the process system isn't responding error.
Click to expand...
Click to collapse
that's very strange. What method are you going about with the RUU?
using adb?
perhaps maybe try going through hboot with the sdcard?
not sure it will make any difference what-so-ever, just brainstorming.
andybones said:
that's very strange. What method are you going about with the RUU?
using adb?
perhaps maybe try going through hboot with the sdcard?
not sure it will make any difference what-so-ever, just brainstorming.
Click to expand...
Click to collapse
Yes, it is very strange. OK so I have done nothing with adb for the upgrade. I have tried the FUU.exe, and the RUU through fastboot, fastboot flash all files separately, and put on an external drive that is fat32 to use HBOOT method. and I just downloaded the firmware and did the HBOOT again twice, doing a factory reset after each one. But in bootloader screen all firmware numbers match up and I never get any errors, just gets stuck on starting apps.
dab1414 said:
Yes, it is very strange. OK so I have done nothing with adb for the upgrade. I have tried the FUU.exe, and the RUU through fastboot, fastboot flash all files separately, and put on an external drive that is fat32 to use HBOOT method. and I just downloaded the firmware and did the HBOOT again twice, doing a factory reset after each one. But in bootloader screen all firmware numbers match up and I never get any errors, just gets stuck on starting apps.
Click to expand...
Click to collapse
Are you S-OFF?
If so are you wanting to run a ROM or just be on stock + rooted?
andybones said:
Are you S-OFF?
If so are you wanting to run a ROM or just be on stock + rooted?
Click to expand...
Click to collapse
Yes I am S-OFF since the day I got the phone. And I have been using RKND roms, but I downloaded and tried all the 5.0.1 roms to see if anything would help. At this point I just want my phone working again, but preferably with the ability to change roms when i want to which is about once a month or two.
So I had tried everything I knew how to do again with no luck. Then I just let my phone sit for the last week. Then I decided to turn it on last night and it works fine. Is there any reason why I had to let the phone stay powered down for days for it to start working? This is the second time I had to do that when upgrading the firmware.
Thanks for bringing this up and I'm glad to hear it worked out for you even tho it took some time. My bro just ran the vzw update while on viper 4.1.0 and now he says his screen is unresponsive. He said it ran through all the normal start up procedures but the welcome screen is shaded (like it's in the background) and he says it won't respond to any touches whatsoever. I won't get a chance to see it until I return to work on Wednesday but if it does the same as yours maybe it'll fix itself by then. :fingers-crossed:
Edit: I just realized that you ran the FUU. He went and said yes to the stupid OTA! Hopefully I'll be able to do something with it when I get back but I'm thinking that running the OTA while rooted and S-Off'd might've screwed it up.
Update: I'm a moron! :silly: It didn't do anything to his phone. I just had to reinstall the recovery and viper 4.3.0 and it's working fine again. I think actually it might've been a good thing he did cause now the phone had the right firmware on it for LP so it all worked out. Sorry for cluttering up your thread.

Categories

Resources