Related
Hey all..
I bought myself a HDMI to mini HDMI lead for my Asus Transformer. Unfortunately I can not get it to output a picture at all. I have tried it on two TV's that both support up to 1080 signal, both tv's work fine with my netbook via a normal HDMI lead.
I don't have another device to test with the mini hdmi lead.. so I have ordered another lead just in case the lead is faulty. Is anyone else having the same issue?
I saw in another forum a couple of people reporting a similar issue with the Asus and I'm concerned my device has a problem :/
Any ideas?
The HDMI lead I purchased is this one below, and I have tried it on a Samsung TV and a crappy vistron.
Cheers,
Tim
Galoot said:
Hey all..
I bought myself a HDMI to mini HDMI lead for my Asus Transformer. Unfortunately I can not get it to output a picture at all. I have tried it on two TV's that both support up to 1080 signal, both tv's work fine with my netbook via a normal HDMI lead.
I don't have another device to test with the mini hdmi lead.. so I have ordered another lead just in case the lead is faulty. Is anyone else having the same issue?
I saw in another forum a couple of people reporting a similar issue with the Asus and I'm concerned my device has a problem :/
Any ideas?
The HDMI lead I purchased is this one below, and I have tried it on a Samsung TV and a crappy vistron.
Cheers,
Tim
Click to expand...
Click to collapse
Not sure what could be the problem cause mine worked straight out of the box no issues at all
Be sure to push the cable all the way in.
When you plug in the hdmi cable to the tablet a HDMI notifaction icon should appear next to the clock. Do you see that?
It seems to only output 720p and no sound, does anyone get sound over hdmi?
SonicTab said:
Be sure to push the cable all the way in.
When you plug in the hdmi cable to the tablet a HDMI notifaction icon should appear next to the clock. Do you see that?
It seems to only output 720p and no sound, does anyone get sound over hdmi?
Click to expand...
Click to collapse
I can confirm that it does output sound, just tested
waqas.sonic said:
I can confirm that it does output sound, just tested
Click to expand...
Click to collapse
Interesting is it a fixed level output of sound or does the volume on the tablet need to be adjusted?
SonicTab said:
Interesting is it a fixed level output of sound or does the volume on the tablet need to be adjusted?
Click to expand...
Click to collapse
It can be adjusted by the volume rocker on the tablet so it's not fixed
SonicTab said:
Be sure to push the cable all the way in.
When you plug in the hdmi cable to the tablet a HDMI notifaction icon should appear next to the clock. Do you see that?
It seems to only output 720p and no sound, does anyone get sound over hdmi?
Click to expand...
Click to collapse
Hey, thanks for the reply.
I am not getting any HDMI icon notification near the clock when plugging in the lead. The lead is pushed all the way in as far is it will go..(the plastic of the lead is against the edge of the device).
The TV obviously see's that something is connected though as it goes from saying 'Check Signal Cable' when it's out of the device to 'No signal' when it's plugged in?
I wonder if this indicated a faulty lead.. wish I had something else to test it with
I don't have a transformer yet, but I'm on a Captivate phone. These phones have a TV-out accessory cable. There was an issue with some people's phones where they were shipped with the "TV-Out" setting turned on while other phones were shipped with that setting turned off.
Is there an option somewhere on the Transformer where you have to turn the "HDMI-Out" setting on?
kingwp1 said:
I don't have a transformer yet, but I'm on a Captivate phone. These phones have a TV-out accessory cable. There was an issue with some people's phones where they were shipped with the "TV-Out" setting turned on while other phones were shipped with that setting turned off.
Is there an option somewhere on the Transformer where you have to turn the "HDMI-Out" setting on?
Click to expand...
Click to collapse
Sadly no I can't find such an option.. it thought the same thing originally so have been through every menu I could find.
Galoot said:
Hey, thanks for the reply.
I am not getting any HDMI icon notification near the clock when plugging in the lead. The lead is pushed all the way in as far is it will go..(the plastic of the lead is against the edge of the device).
The TV obviously see's that something is connected though as it goes from saying 'Check Signal Cable' when it's out of the device to 'No signal' when it's plugged in?
I wonder if this indicated a faulty lead.. wish I had something else to test it with
Click to expand...
Click to collapse
Hopefully just the lead, not the tablet.
I figured out the sound issue, sound for me works if its plugged in directly to the HD set.
If I plug it in via a hdmi switch box no sound.
Good luck getting yours working.
SonicTab said:
I figured out the sound issue, sound for me works if its plugged in directly to the HD set.
If I plug it in via a hdmi switch box no sound.
Click to expand...
Click to collapse
There are a lot of stereo recievers that can pass through the video from an HDMI input, but will not output audio over HDMI. Your audio is probably still in that reciever box, but you'll have to get it out some other way. Try Component or Composite Audio cables.
Could you guys with working HDMI leads possibly let me know where you got yours from please?
If I can get the same lead (I'm in the UK) then I probably have a better chance of it working (if there is not a fault with the device).
Thanks
Galoot said:
Could you guys with working HDMI leads possibly let me know where you got yours from please?
If I can get the same lead (I'm in the UK) then I probably have a better chance of it working (if there is not a fault with the device).
Thanks
Click to expand...
Click to collapse
Here you go http://www.comet.co.uk/p/Camcorder-Accessories/buy-TEMIUM-MINI-HDMI-1.8M-Camcorder-Accessorie/568597
That's the one I am using
Hi,
I'm having the same exact problem. I plug the cable into my Transformer - nothing. I've tried to set my monitor to look for it, but it finds nothing. I see no notification on my tablet.
Here is the cable I'm using:
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=330550984450&ssPageName=STRK:MEWNX:IT
Fortunately, my buddy also got a Transformer (we both ordered from Amazon at midnight on the 26th) so I can test the cable on his device. I'm going to assume if it doesn't work on his then (luckily) it's not my Transformer that is faulty. Then I either have a bad cable or got the wrong one (can anyone confirm if the cable I purchased should work with the Transformer?)
Thanks.
CoBrA2168 said:
Hi,
I'm having the same exact problem. I plug the cable into my Transformer - nothing. I've tried to set my monitor to look for it, but it finds nothing. I see no notification on my tablet.
Here is the cable I'm using:
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=330550984450&ssPageName=STRK:MEWNX:IT
Fortunately, my buddy also got a Transformer (we both ordered from Amazon at midnight on the 26th) so I can test the cable on his device. I'm going to assume if it doesn't work on his then (luckily) it's not my Transformer that is faulty. Then I either have a bad cable or got the wrong one (can anyone confirm if the cable I purchased should work with the Transformer?)
Thanks.
Click to expand...
Click to collapse
Good luck with the test.. it seems this issue is becoming more common. Could you let me know the outcome as it will be useful troubleshooting my issue.
I'm tempted to go and pay £20 for the cable listed as working above..but what I really need is to test it with a known working cable.
another little update... I realised that my Canon camera has a mini hdmi output that is supposed to output video. The cable I have does not work with the camera either! So I'm hoping this is a good indication that the cable is the issue.
OK my issue is resolved... it was the cheap cable from eBay.
I bought an expensive cable from Maplin and it works fine.. the output from the tablet is grainy/crap and probably not worth the £20 I spent to get it working but at least I know the device isn't faulty
For once it obviously was worth paying for the better quality cable.
Sent from my Transformer TF101 using XDA Premium App
Just wanted to add.. the second cheap HDMI lead I ordered from eBay worked fine (picture is still a bit crap though).
Sent from my Transformer TF101 using XDA Premium App
I avoid eBay for any kind of cables. If you're in the US, Monoprice has dirt cheap cables that I've used on lots of different devices without any issues. Not sure if they distribute overseas.
My hdmi only outputs at 720p as well. Isn't this thing suppose to output to 1080p? I have the official 3.1 firmware installed.
I got a female mini hdmi to female hdmi adapter and an hdmi cable and hooked up to my TV. I got a notification on the Xformer and full black screen on the TV at times. Then I got 'Not Support!' on my Vizio 37 inch.
Then I tried hooking it to a BenQ 24" which again causes the notification in the transformer, but no output at all. The screen just shows blue.
I then tried the same mini hdmi adapter hdmi cable combination on my Canon camcorder and it worked perfectly. I tried swapping the HDMI cable with the one in use on my TV and that didn't help.
Is there any chance this is a cheap hdmi-mini hdmi adapter issue since the Xformer is detecting the plug in? Should I make a try of buying another one? Anyone get a cheap cable / adapter anywhere that you got working really well preferably with a Vizio?
Thanks in advance!
Same issue. No luck on my plasmas but my lcds work just fine
Both the tv and the screen I tried out were lcds. Should I try buying a mini to full hdmi cable? This is a major issue for me since i was planning to get rid of the broken screen notebook now connected to my TV and use the tablet to play web video.
Let me clarify. When i said not working on two TVs that is all the TVs i have. I haven't gotten an output to anything so far. But the tablet is detecting when i plug in the mini hdmi adapter.
I'm getting the same problem on a DLP HDTV... my archos tablet did output, but not the TF... I also get a connection notification in Honeycomb.
Sent from my Transformer TF101 using XDA Premium App
ice0901 said:
Same issue. No luck on my plasmas but my lcds work just fine
Click to expand...
Click to collapse
Interesting...
My Panasonic plasma did not work either, but my Vizio LCD in the bedroom did.
So is this a software issue? If it works on one TV, it must work on another...
Sent from my Transformer TF101 using XDA Premium App
Mine worked OK with our Samsung LCD TV, don't suppose that really helps you much but thought I'd mention it.
I have a mini hdmi to full hdmi cable and it refuses to work with my Panasonic Viera plasma, but works fine on a cheap no-name LCD. Not quite sure why
Works fine on my LG E2770V. I will try it out on my Panasonic 50" G10 and respond back.
I tried again with the same mini to full hdmi converter but with a different HDMI cable. It works but grainy as hell and way overscanned, and failed as soon as I tried playing videos. I think the extra adapter and making an extra connection point is not helping. I have ordered another single piece cable with good reviews from Amazon.
Well this is bittersweet... It's good to see I'm not alone having these issues with HDMI connection.
I bought the appropriate cable yesterday (Monstercable) and hooked it up when I got home. The TF had no problem recognizing that it was connected, but the popup notification cannot be clicked. My Sony Bravia 47" is also not recognizing the connection as I cannot switch the input to the one plugged into the TF.
I can only assume this is a software issue and will be fixed (hopefully) with a FOTA.
Does anyone have any suggestions or is there any way to get ASUS to weigh in on this issue. One of the many reasons I went with the TF was because of its HDMI output capabilities. The little popup that asks to display TF screen on the TV is a HUGE tease!!!!
At what resolution does the TF output?
Is this possible that some TV do not support that resolution?
My adapter is on its way from HK. Hopefully it will work with my TVs.
Just another confirmation that my Eee Pad outputs to my Sony Bravia LCD just fine, but refuses to output at all to my Panasonic Viera LCD... Annoyingly I bought the cable for the Viera!
Here's Asus' smart a$$ reply, which gives no solution to our problem:
Thank you for contacting ASUS Customer Service.
The resolution would be limitted to 720P,that's design of Andriod.
Wish you good luck! I do appreciate for your feedback!
–-----------------
I should point out that my TV supports up to 1080i, so this really shouldn't be a problem. I would have appreciated more help from their tech support :/
Sent from my Transformer TF101 using XDA Premium App
EP2008 said:
Here's Asus' smart a$$ reply, which gives no solution to our problem:
Thank you for contacting ASUS Customer Service.
The resolution would be limitted to 720P,that's design of Andriod.
Wish you good luck! I do appreciate for your feedback!
–-----------------
I should point out that my TV supports up to 1080i, so this really shouldn't be a problem. I would have appreciated more help from their tech support :/
Sent from my Transformer TF101 using XDA Premium App
Click to expand...
Click to collapse
Some TVs only support 1080i but not 720p. My sony projection TV does this.
junks2010 said:
Some TVs only support 1080i but not 720p. My sony projection TV does this.
Click to expand...
Click to collapse
Yes, mine supports 1080i and everything under it, including 720p.
Sent from my Transformer TF101 using XDA Premium App
Just an update.
I bought an mini-hdmi to hdmi adapter.
My TF hdmi out works perfectly with both my plasma TVs: 720P Panasonic Viera, and a 1080p Pioneer Kuro.
junks2010 said:
Just an update.
I bought an mini-hdmi to hdmi adapter.
My TF hdmi out works perfectly with both my plasma TVs: 720P Panasonic Viera, and a 1080p Pioneer Kuro.
Click to expand...
Click to collapse
I just recently purchased a mini hdmi adapter to hdmi adapter from mono price. I tired connecting the cable to my TV and I get no response from either the TV or the TF. I have a Panasonic Vierra Plasma. Shouldn't I at least get some kind of notification on the TF? Is there something I should enable first that I am missing?
AllTheWay said:
I just recently purchased a mini hdmi adapter to hdmi adapter from mono price. I tired connecting the cable to my TV and I get no response from either the TV or the TF. I have a Panasonic Vierra Plasma. Shouldn't I at least get some kind of notification on the TF? Is there something I should enable first that I am missing?
Click to expand...
Click to collapse
I did not have to enable anything on the TF. You should see a notification icon on th TF when you connect the hdmi cable.
You can try this:
Connect the cable to the TV.
Turn on the TV and swith to the correct input.
Connect the other end of the cable to the TF.
You should see a notification on the TF, and picture should show on the TV.
One of the displays I need to connect with the Transformer only have dsub and dvi connections. Has anybody hooked up their tablet through an hdmi/dvi converter?
I have no hdmi cables to test out, and didn't want to spend the couple of bucks for a cable that I have no use for.
Good question. Bumping to get attention.
Sent from my Transformer TF101 using XDA Premium App
I haven't received mine yet, but I think a mini-HDMI to HDMI cable -> HDMI to DVI adapter -> DVI cable should work.
It works for me, at least, I'll just be leaving the DVI cable on my desk and taking the HDMI cable with me when I leave work.
I'll post my results when it arrives on monday.
Edit: May just be able to put the adapter on the monitor and skip the cable altogether.
Like I said, I'll post
JCopernicus said:
One of the displays I need to connect with the Transformer only have dsub and dvi connections. Has anybody hooked up their tablet through an hdmi/dvi converter?
I have no hdmi cables to test out, and didn't want to spend the couple of bucks for a cable that I have no use for.
Click to expand...
Click to collapse
I have bought a dvi to HDMI converter to try this out, but have not been near a monitor with dvi input all week. I'll update you on Monday, when I return to work.
I appreciate it guys.
=)
It will work fine, since all the signals are digital. Yes it really is that simple.
Except that I haven't seen a single mention as to whether the TF is using HDCP for it's HDMI output. If that's the case then a DVI converter will not work.
seshmaru said:
It will work fine, since all the signals are digital. Yes it really is that simple.
Click to expand...
Click to collapse
^This
JCopernicus said:
Except that I haven't seen a single mention as to whether the TF is using HDCP for it's HDMI output. If that's the case then a DVI converter will not work.
Click to expand...
Click to collapse
I'm pretty sure HDCP has to do with the monitor/tab not the i/o. My Dell 2407WFP is HDCP, has no HDMI (DVI/VGA only) and my TF works with it.
Sent from my Asus Decepticon using Tapatalk
Jocelyn said:
^This
I'm pretty sure HDCP has to do with the monitor/tab not the i/o. My Dell 2407WFP is HDCP, has no HDMI (DVI/VGA only) and my TF works with it.
Sent from my Asus Decepticon using Tapatalk
Click to expand...
Click to collapse
Well good to know someone has it working. Do you have it setup through a single cable, or through a converter?
mini hdmi to dvi cable
Found this:
http://www.shopfsi.com/6_Mini_HDMI_to_DVI_Cable_p/minihdmi-dvi-6ft.htm
Curious if anybody is using one. Might try dealextreme to get one on the cheap.
altarity said:
Found this:
http://www.shopfsi.com/6_Mini_HDMI_to_DVI_Cable_p/minihdmi-dvi-6ft.htm
Curious if anybody is using one. Might try dealextreme to get one on the cheap.
Click to expand...
Click to collapse
Just get these from monoprice. Same thing for way less and probably better quality. I buy all of my cables from them.
http://www.monoprice.com/products/product.asp?c_id=104&cp_id=10419&cs_id=1041902&p_id=2029&seq=1&format=2
http://www.monoprice.com/products/product.asp?c_id=102&cp_id=10242&cs_id=1024201&p_id=3645&seq=1&format=2
altarity said:
Found this:
http://www.shopfsi.com/6_Mini_HDMI_to_DVI_Cable_p/minihdmi-dvi-6ft.htm
Curious if anybody is using one. Might try dealextreme to get one on the cheap.
Click to expand...
Click to collapse
35$ is too much though. Cheaper options on ebay i bet.
.im facing that problem now with my computer monitor. I hooked up the pad by two seperated ways-first with a dvi2hdmi adapter connected to a simple dvi cable, didnt work.second try was with a special 5 meters dvi2hdmi cable.again.didn't work. I don't know what to do? I tried it with another dvi lcd and it just saying that the monitor went to sleep mode.
Important to say that mirroring to a TV LCD or plasma works great whitout any problem.
What's the dvi problem?
i tried this with a samsung monitor. using dvi-to-hdmi-to-minihdmi adapter. i don't know if it's just 1 adapter too many, but it doesn't seem to work.
I don't need a signature.
num1gever said:
.im facing that problem now with my computer monitor. I hooked up the pad by two seperated ways-first with a dvi2hdmi adapter connected to a simple dvi cable, didnt work.second try was with a special 5 meters dvi2hdmi cable.again.didn't work. I don't know what to do? I tried it with another dvi lcd and it just saying that the monitor went to sleep mode.
Important to say that mirroring to a TV LCD or plasma works great whitout any problem.
What's the dvi problem?
Click to expand...
Click to collapse
Does the monitor support hdcp?
Sent from my HTC Eva 4G using Tapatalk
Jocelyn said:
Does the monitor support hdcp?
Sent from my HTC Eva 4G using Tapatalk
Click to expand...
Click to collapse
Dont know. My monitor is lg l227wtp.
The second one i have is also lg, but e2350t
num1gever said:
Dont know. My monitor is lg l227wtp.
The second one i have is also lg, but e2350t
Click to expand...
Click to collapse
Please help!
cjwilber said:
I have bought a dvi to HDMI converter to try this out, but have not been near a monitor with dvi input all week. I'll update you on Monday, when I return to work.
Click to expand...
Click to collapse
Didn't work for me. The monitor just doesn't see the Transformer. Might be a dodgy adapter because the HDMI cable works fine.
Didn't work for me either with 3 different types of Dells at work. Just registered after lurking for weeks just to comment on this issue!
I can't post the URLs as a noob but the cable and converter are from Amazon.
I have newer Dells at home I can test with but that was not the point...
Drats!!!
Any kind of hacks to get around whatever is preventing this from happening...??
same problem here. got a dvi > hdmi adapter, connected with a 1.8 meter mini hdmi > hdmi cable to a samsung monitor..
no screen image...
connecting direct to my tv (hdmi) works fine!
edit: read some stuff on the xoom forums about a 5 volt line that's missing in the mini hdmi out... and the need for a hdmi>vga convertor in some cases.. (expensive)
Strange thing is, i connected my popcorn 110 to the monitor and it works flawlessly .. both got hdmi 1.3a ..
I recently received an HDMI to Micro-HDMI cord, and was excited to test it on my 37" Panasonic.
I have tried every combination of turning on and off the TV/Tablet first etc...and it STILL will not show up on my TV. It's acting like there is nothing connected at all. No prompts.
So...what am I doing wrong? The cord I bought was 3 bucks on Amazon, so it may be a knock off or something. Buy a new cord? Any help is appreciated. Half the reason I bought this thing was to watch movies on my hdtv.
roncoallstar said:
I recently received an HDMI to Micro-HDMI cord, and was excited to test it on my 37" Panasonic.
I have tried every combination of turning on and off the TV/Tablet first etc...and it STILL will not show up on my TV. It's acting like there is nothing connected at all. No prompts.
So...what am I doing wrong? The cord I bought was 3 bucks on Amazon, so it may be a knock off or something. Buy a new cord? Any help is appreciated. Half the reason I bought this thing was to watch movies on my hdtv.
Click to expand...
Click to collapse
I would try to find another TV to test with... Maybe a display model in a retail store if you don't know anyone with a TV that you can test with?
Sent from my ASUS Transformer Pad TF700T using Tapatalk 2
My micro HDMI cord only worked on my LG when I first selected the input on my TV and then unplugged and plugged the HDMI cord back into the Infinity. Also make sure the cord is plugged ALL the way in.
When I played NetFlix on the tablet, the TV would display the video and sound, but the closed captioning stayed on the device.
roncoallstar said:
I recently received an HDMI to Micro-HDMI cord, and was excited to test it on my 37" Panasonic.
I have tried every combination of turning on and off the TV/Tablet first etc...and it STILL will not show up on my TV. It's acting like there is nothing connected at all. No prompts.
So...what am I doing wrong? The cord I bought was 3 bucks on Amazon, so it may be a knock off or something. Buy a new cord? Any help is appreciated. Half the reason I bought this thing was to watch movies on my hdtv.
Click to expand...
Click to collapse
I bought a Micro HDMI to HDMI cord on amazon for about 3 dollars also, it worked perfectly fine on my 42inch LCDTV Panasonic. All I had to do was connect it and change the input on the TV to the right HDMI and it worked fine. Although watching movies with subtitles didn't work so well as the subtitles was left at the tablet screen, and I couldn't turn the tablet screen off while watching movies on my TV.
when you plug in the HDMI cord, the TF700 should show some kind of "HDMI" noticifation, and will stay on when connected. If you're not seeing this, then you'll need to figure out if it's the cord or HDMI port on one of your devices. The TV, hook something else to it that used HDMI. The cord, try another cord. Monoprice has them cheap too; probably like $5 with shipping. If you're not seeing the HDMI notification after the cord, and you know they cord is good, it's your TF.
lovekeiiy said:
when you plug in the HDMI cord, the TF700 should show some kind of "HDMI" noticifation, and will stay on when connected. If you're not seeing this, then you'll need to figure out if it's the cord or HDMI port on one of your devices. The TV, hook something else to it that used HDMI. The cord, try another cord. Monoprice has them cheap too; probably like $5 with shipping. If you're not seeing the HDMI notification after the cord, and you know they cord is good, it's your TF.
Click to expand...
Click to collapse
I have problems as well, tried to connect my tf700 to my samsung UE46ES8005 led tv but cant get it to work
On LG i have no problems at all, but the samsung refuses. Tried different cables to no avail.
I have sent a mail to samsung support 3 days ago but no answer.... hmm
//Mackis
same her it works on my monitor but i have Panasonic tv and it doesn't work tried a variety of cables and no go but tried on a Toshiba TV at parents and it works.i had the prime and it work just fine
Asus really needs to add some HDMI scaling options to the TF700 to allow it to work with more TV's - I'm assuming these issues are because the TF700 only seems to output at it's native resolution, which most devices don't seem to like... I'll do some testing with my Toshiba 1080p TV today, just to see what I can find out as well and report any findings that may be useful.
Sent from my ASUS Transformer Pad TF700T using Tapatalk 2
I've connected the TF700T to be Panasonic 55TV50 Plasmass HDTV and to a Vizio 16" LCD TV. No issues.
Connecting to 2 Vizio tvs and a Hitachi no problem.
Our 58 inch Samstung plasma only sees the tablet connection on HDMI 3 which is the recommended port for a monitor hook up from a pc.
Sent from ???
There is a HDMI encryption called HDCP that basically makes it more annoying to use HDMI than it should. Some TV's do not have HDCP enabled. Since the Infinity FORCES HDCP chances are whats happening is the TV doesnt know what to do with the encrypted signal and the tablet doesnt want to play nice so the TV will work.
Unfortunate for you, im guessing your TV is not compatible. Sorry for the bad news mate.
There have also been problems with people trying to use HDMI - DVI adapters and connect into DVI monitors, since a lot of (older) DVI devices also dont support HDCP or sometimes the connector itself doesnt have the right connections to make HDCP work often it all just doesnt work properly. Maybe in time there will be a hack to disable HDCP, until then theres not much you can do.
pileot said:
There is a HDMI encryption called HDCP that basically makes it more annoying to use HDMI than it should. Some TV's do not have HDCP enabled. Since the Infinity FORCES HDCP chances are whats happening is the TV doesnt know what to do with the encrypted signal and the tablet doesnt want to play nice so the TV will work.
Unfortunate for you, im guessing your TV is not compatible. Sorry for the bad news mate.
There have also been problems with people trying to use HDMI - DVI adapters and connect into DVI monitors, since a lot of (older) DVI devices also dont support HDCP or sometimes the connector itself doesnt have the right connections to make HDCP work often it all just doesnt work properly. Maybe in time there will be a hack to disable HDCP, until then theres not much you can do.
Click to expand...
Click to collapse
Again pileot... HDCP has NOTHING to do with it. Find me a monitor/tv that does have HDMI that does not have hdcp enabled..... they don't exist anymore.
If it has HDMI... then chances are 99.999999% that you have an HDCP compliant monitor.
http://answers.yahoo.com/question/index?qid=20090922221218AAyrnYz
DVI will not work because the 5v signal that is needed for the monitor to recognize that something is connected to it-- is not sent with our tablets.
Seems this question is repeated as soon as it falls off the first page......
Hi.
I thought on sharing my findings on how i solved getting my infinity to work with my led-tv.
I have tried all kind of stuff before this but i have a stubborn samsung that doesn't want to recognize the tab.
I got some tips from within xda that infinity lacks the 5v for hdmi out so the tv can sence that something is hocked up.
i bought a Andersson HDMI Switch 4x1 that has a poweradaptor to try this out.
It wasn't an easy go by just hooking things up.
so i tried hocking my laptop up to the switch and got the picture on the tv, then i connected the tab on the second hdmi port and the infinity recognized that the hdmi was attached, i tried to switch ports with the remote to the hdmi switch but that failed, so i disconnected the cable to the laptop and VOILA i got the tv to show the tablets screen on the TV screen, i can now scale the picture and everything works great.
If i leave the switch powered on and connected to the tv i can connect and disconnect the tab without problems.
If i power of the switch i have to go through the same procedure again to fool the tv to recognize that samething is hooked up to the hdmi port.
Hope this helps some of you with the same problem and stubborn tv sets.
Best regards
Mackis
Mackis said:
Hi.
I got some tips from within xda that infinity lacks the 5v for hdmi out so the tv can sence that something is hocked up.
i bought a Andersson HDMI Switch 4x1 that has a power adaptor to try this out.
If i leave the switch powered on and connected to the tv i can connect and disconnect the tab without problems.
If i power of the switch i have to go through the same procedure again to fool the tv to recognize that samething is hooked up to the hdmi port.
Hope this helps some of you with the same problem and stubborn tv sets.
Best regards
Mackis
Click to expand...
Click to collapse
Weird. I have a powered monoprice HDMI switch connected to a Denon Receiver, which connects to my Sony TV. I've had no problems with the TF700 Infinity being recognized. I also took the Infinity on a cruise and connected it to a Samsung 720p LCD TV with no problems. I believe that this would discount the theory that the Infinity doesn't have the right HDMI signal/voltage.
I assume that you tried changing HDMI cables? Perhaps the TF700 that you have has a defective HDMI port.
DavidHart said:
Weird. I have a powered monoprice HDMI switch connected to a Denon Receiver, which connects to my Sony TV. I've had no problems with the TF700 Infinity being recognized. I also took the Infinity on a cruise and connected it to a Samsung 720p LCD TV with no problems. I believe that this would discount the theory that the Infinity doesn't have the right HDMI signal/voltage.
I assume that you tried changing HDMI cables? Perhaps the TF700 that you have has a defective HDMI port.
Click to expand...
Click to collapse
________
That was my first guess but after i read here on xda that even the cables can be defective i bought one more, then i tried different manifactures LG and philips lcd-tv worked with the infinity without problems, so i guess i have a tv that is too new. I contacted Samsung and they are looking in to it. Not that i have high hopes, for now im a happy camper solving it this way.
Mackis said:
________
That was my first guess but after i read here on xda that even the cables can be defective i bought one more, then i tried different manifactures LG and philips lcd-tv worked with the infinity without problems, so i guess i have a tv that is too new. I contacted Samsung and they are looking in to it. Not that i have high hopes, for now im a happy camper solving it this way.
Click to expand...
Click to collapse
It's weird that the TV would recognize other HDMI devices but not the Infinity. At least you have it working.
DavidHart said:
It's weird that the TV would recognize other HDMI devices but not the Infinity. At least you have it working.
Click to expand...
Click to collapse
Yes i know, i think its weird to, but i think its the 5v issue that my samsung model don't sence.
On the LG i have to change hdmi port with the remotecontrol to the tv for it to work or power it down and up again otherwise its not working. On the samsung lcd on my work i have no problems at all but it is older tv models. If i could get hold of some other tv model that anyone here have problems hooking up the infinity with i would be happy to try this solution and see if it works.
//Mackis
Want to send e special thank's to Cheapxj and jordanmw who contributed with answers to lead me the right way and get this working in this thread:
http://forum.xda-developers.com/sho...ds-cse&usg=AFQjCNFvHH2RDJ-vbnV244BRFl8IzeHkGQ
And yes i pushed the thank you button for both of you!!