I just brick my phone i get stuck on the boot screen try to do the update thru hboot but it seems that i deleted one of the files that would take me back to stock and ideas please. I downloaded a rom called dogma and soft brick my phone.
Pull the Battery ?
Can you get to recovery Bootloader ?
Did you flash a Desire radio ?
cal4877 said:
I just brick my phone i get stuck on the boot screen try to do the update thru hboot but it seems that i deleted one of the files that would take me back to stock and ideas please. I downloaded a rom called dogma and soft brick my phone.
Click to expand...
Click to collapse
What file did you delete that you believe you might need? Were you trying to flash back to stock? A clearer picture of the process you were trying to perform would be helpful.
I get stuck on the boot loop screen. I pulled the battery out and press down button and power button, when i get to hboot it goes to do an update by itself, when it asks me if i want to update i click yes but but that still dont work. i cant get into recover mode either. im downloading ruu files now hopefully that would work unless i have to have the phone on. All i get when i get when i perform the battery pull out options is to get to the hboot screen but it would not let me scroll down to the recovery mode option, it seems that fast boot is on.
I'd try a stock RUU. from hboot . Format your sd card first to be safe .
Cal remove your SD card boot into hboot it will search for the file but can't find it then put your SD card back in and then click recovery
Sent from my HTC Desire HD using XDA Premium App
While holding the volume down rocker, quickly press the power button.
or the above post....I'm not posting attention here.
Sent from my Inspire 4G running something. ?!?
cal4877 said:
I get stuck on the boot loop screen. I pulled the battery out and press down button and power button, when i get to hboot it goes to do an update by itself, when it asks me if i want to update i click yes but but that still dont work. i cant get into recover mode either. im downloading ruu files now hopefully that would work unless i have to have the phone on. All i get when i get when i perform the battery pull out options is to get to the hboot screen but it would not let me scroll down to the recovery mode option, it seems that fast boot is on.
Click to expand...
Click to collapse
Do you have a PD98IMG file on the root of your SD card? If so, either use the trick of pulling the SD card posted above, or remove your SD card and if you have a card reader use a PC to delete the offending file, and then re-install your SD card and reboot.
Thanks guys RUU worked like a charm. It made me loose root but I just finish rooting the phone again. I think I deleted the stock image file that's what happen.
Glad you fixed it.
ycode90 said:
Glad you fixed it.
Click to expand...
Click to collapse
Me too . I don't think it is easy to hard brick this phone...speaking as one that has had many "brick" events with this thing...it is recoverable if it boots to any state at all it seems.
A brick is an expensive fried electronic device. I have't seen a bricked htc irl except when a friend of mine didnt rtfm and bricked his wizard in 2006. The only fix was jtag/not worth it.
Sent from my Inspire 4G using XDA Premium App
People throw the "brick" word around an awful lot, but by conventions a "bricked" phone is defined as unrecoverable.
Gene Poole said:
People throw the "brick" word around an awful lot, but by conventions a "bricked" phone is defined as unrecoverable.
Click to expand...
Click to collapse
Indeed. I always chuckle when I see posts, such as this one, titled "brick!!"
Distinguishing with "soft-brick" and "hard-brick" nowadays seems necessary due to such sloppy usage of the original term.
Bricked would mean a brick fell on your phone lol hi. There would be no way of fixing the phone.
Sent from my Desire HD using XDA App
Brick
I bricked my phone, htc inspire 4g 2.3.3 today for a friend of mine, not a soft brick either. I have rooted my htc thunderbolt without any problems but this phone was so easy to brick, when I hold down the volume button and power I can't recover the phone at all, I didn't make a backup either. Can anyone help? Does anyone have the original firmware or know how to solve this problem?
newbie818 said:
I bricked my phone, htc inspire 4g 2.3.3 today for a friend of mine, not a soft brick either. I have rooted my htc thunderbolt without any problems but this phone was so easy to brick, when I hold down the volume button and power I can't recover the phone at all, I didn't make a backup either. Can anyone help? Does anyone have the original firmware or know how to solve this problem?
Click to expand...
Click to collapse
If you can get into hboot by holding volume down and pressing power follow this guide.
genes tool
Sent from my Inspire 4G using xda premium
I'll beat Zel to the punch and say this:
USE THE SEARCH BAR.
Now, Somebody lock this thread.
newbie818 said:
I bricked my phone, htc inspire 4g 2.3.3 today for a friend of mine, not a soft brick either. I have rooted my htc thunderbolt without any problems but this phone was so easy to brick, when I hold down the volume button and power I can't recover the phone at all, I didn't make a backup either. Can anyone help? Does anyone have the original firmware or know how to solve this problem?
Click to expand...
Click to collapse
What did you do? If you truly can't get to hboot, then you are really bricked; hboot is necessary for anything else to load and run.
How did you manage this? If you have a late model Inspire (post Aug 2011) and tried to install an older hboot (from, say the Froyo RUU), or the ENG hboot, then it isn't damaged so much as just confused and will boot eventually (like 10-20 minutes) from which point you can get the right hboot back onto it.
Please elaborate.
Joshp406 said:
I'll beat Zel to the punch and say this:
USE THE SEARCH BAR.
Now, Somebody lock this thread.
Click to expand...
Click to collapse
Well apparently he did, because he didn't start a new thread.
Sent from my HTC Inspire 4G using Tapatalk
Related
Well first.. I have my inspire running on Gingerbeast Rom. Everything was going well for a good while. Later on it started shutting itself down randomly. Once it had rebooted, I would wait and as soon as i'd try to use the phone, it would reboot. After it rebooted, it would keep rebooting all over again... etc.. I figured that there was a problem with the ROM so I tried re flashing it all over again. Now after I re flashed the ROM, it booted up to the boot screen and that was it... I tried getting into recovery mode by going to into hboot, but when I'm there it won't allow me to use the volume rocker to select anything. I really hope that it's not a big issue. (but I'm already thinking the worst) Did I possibly brick or soft brick my phone.. Is anyone able to tell me what I might of done wrong and is it fixable? I've been without a phone for a few days now.. and I hate this.. THANKS in advance and I'm sorry that this is a little long. ANY HELP would be so APPRECIATED...
Did you wait, when you go into hboot it delays for a min because it wants to check for img file...
Sent via my BBMod Inspire "4G"
Thanks for the response.. When I power up the phone, it stays on the boot screen forever. When I hold vol - and power it takes me into hboot but won't allow me to select anything, then it will ask me if I will allow update on the splash image, then I select yes... boots up again and it stays there and nothing happens...
You have an pd98IMG file at the root if your sd card. Remove it and it recovery will work fine. Recovery is trying to update that img file every time
Sent from my Inspire4G using xda premium
It works!!!!!! THANKS a million.. I have the biggest smile on my face right now
acuevascm said:
It works!!!!!! THANKS a million.. I have the biggest smile on my face right now
Click to expand...
Click to collapse
glad I could help =)
Hit the thanx button * hint hint* LOL
Sent from my Inspire4G using xda premium
I have HTC Inspire 4G. Latest CoreDroid. I tried to flash UNITY V9 and then ive been stuck at the HTC logo screen. I havent bricked my phone. I was in a situation like this once b4 and i had to use a diff SD card to get things back right but i forgot how to do it. Can somebody guide through these steps again so i will not forget ? Or any other info is helpful. Im kinda in arush on the way to work.
try to wipe cache
Meercy said:
I have HTC Inspire 4G. Latest CoreDroid. I tried to flash UNITY V9 and then ive been stuck at the HTC logo screen. I havent bricked my phone. I was in a situation like this once b4 and i had to use a diff SD card to get things back right but i forgot how to do it. Can somebody guide through these steps again so i will not forget ? Or any other info is helpful. Im kinda in arush on the way to work.
Click to expand...
Click to collapse
Have you re-downloaded the v9 kernel, there were issues with the earlier version (at least there was on this device).
You could try to download and re-flash whatever was the previous (old) kernel.
ben_pyett said:
Have you re-downloaded the v9 kernel, there were issues with the earlier version (at least there was on this device).
You could try to download and re-flash whatever was the previous (old) kernel.
Click to expand...
Click to collapse
I understand but in order for me to do that I need to be able to get to the sd card. Hmmm ok i think i know how to get to the sd card. I could take it out my phone. which leaves me with one question.
how am i going to get to recovery to flash it once again. Ivbe tried to hold the volume down button and hit power. But once im at the screen that says recovery and few other things. I can never move down or up or hit power so it can function. I have no control on that screen.
You do know that this forum isn't for your device. There's probably one specifically for yours.
When you Get to that white screen called the bootloader, the volume keys should navigate through the menus and power acts as select
Swyped from my Desire S using XDA Premium
yea i noticed it wasnt tonight once i got home. I have reposted in the right forum being a lil more detailed.
But once i get to my bootloader i can never select recovery. I never have been able too except a few times. Idk if i did something differently or not. But once im on the bootloader screen. The volume keys or the power button doesnt work.
Meercy said:
yea i noticed it wasnt tonight once i got home. I have reposted in the right forum being a lil more detailed.
But once i get to my bootloader i can never select recovery. I never have been able too except a few times. Idk if i did something differently or not. But once im on the bootloader screen. The volume keys or the power button doesnt work.
Click to expand...
Click to collapse
For getting to recovery try installing android sdk and using adb reboot recovery
From there you can put another rom in the sd card. Wipe all and install a new one, which includes a new kernel inside. (like all of them)
I was stuck at the bootloader after trying to install a corrupt radio. I could get into recovery but it only offered yes or no for the corrupt file.
I removed SD card and pulled battery and restarted, i was then was able to get into recovery and do a wipe and it then booted fine.
Sent from my HTC Desire S using XDA App
Guys - I need help. I think i just blew my phone.
I flashed THE Sense-O-Maniac ICE ROM after a clean wife and my phone wouldn't boot. It kept getting stock on the Beats Logo. So I rewiped everything and reflashed this ROM. - Same result.
I then thought, maybe I should also update the firmware, though I am pretty sure, that my firmware was up to date.
So i reflashed the firmware on phone but it still wouldnt boot.
I took the memory card out and deleted the the firmware file so that I could not flash another rom. But when I tried to boot in Recovery my screen just went blank.
JUST BLANK
When I switch my phone on, I get a blank screen. The screen does light up though, but nothing shows.
If i connect the phone to USB, then the screen again lights up, even without the batter.
Has my phone gone poof??? Please help.
clean wife.
and why do u keep reflashing sense o maniac? why not try other rom?
Did you update your kernel or tried to use backup or install just old ROM, so far it doesn't sound bricked but just something missing, what was your previous ROM?
Sent from my HTC Sensation Z710e using XDA
Wrong section! This is not Q&A or Sensation General!
guptadh said:
Guys - I need help. I think i just blew my phone.
I flashed THE Sense-O-Maniac ICE ROM after a clean wife and my phone wouldn't boot. It kept getting stock on the Beats Logo. So I rewiped everything and reflashed this ROM. - Same result.
I then thought, maybe I should also update the firmware, though I am pretty sure, that my firmware was up to date.
So i reflashed the firmware on phone but it still wouldnt boot.
I took the memory card out and deleted the the firmware file so that I could not flash another rom. But when I tried to boot in Recovery my screen just went blank.
JUST BLANK
When I switch my phone on, I get a blank screen. The screen does light up though, but nothing shows.
If i connect the phone to USB, then the screen again lights up, even without the batter.
Has my phone gone poof??? Please help.
Click to expand...
Click to collapse
try "adb reboot recovery" continuously when booting the phone, ignoring all of the "error: device not found"
Boot while holding the volume down key (meaning power btn+ vol-). that should take you to the boot loader. once you're there, go to fastboot and flash a recovery image. you seem to have corrupted yours.
I had the same troubles with that rom.
Sent from my Sensation using xda premium
frost_icewind said:
Boot while holding the volume down key (meaning power btn+ vol-). that should take you to the boot loader. once you're there, go to fastboot and flash a recovery image. you seem to have corrupted yours.
Click to expand...
Click to collapse
I have already tried this continuously. No result with pressing boot with holding the volume key at all!! If I could do that, I knew i would be fine.
jufa2401 said:
I had the same troubles with that rom.
Sent from my Sensation using xda premium
Click to expand...
Click to collapse
What did you finally do ?
IMarks said:
Did you update your kernel or tried to use backup or install just old ROM, so far it doesn't sound bricked but just something missing, what was your previous ROM?
Sent from my HTC Sensation Z710e using XDA
Click to expand...
Click to collapse
I was using AOSP rom before this! I just can't get anything to show up on the screen no matter how I try!~
guptadh said:
What did you finally do ?
Click to expand...
Click to collapse
Use a different ROM?
Moon2 said:
try "adb reboot recovery" continuously when booting the phone, ignoring all of the "error: device not found"
Click to expand...
Click to collapse
i have been trying to do this for the past 10 mins, but I cant get anything.
All i keep getting is error:device not found.
The computer too does not give any indication of any device being connected to the Usb port..
You should boot into bootloader (vol- & power) then flash a stock gb ruu. After this you can proceed to s-off, root, firmware ... Etc
Sent from my HTC Sensation XE with Beats Audio Z715e using XDA
guptadh said:
i have been trying to do this for the past 10 mins, but I cant get anything.
All i keep getting is error:device not found.
The computer too does not give any indication of any device being connected to the Usb port..
Click to expand...
Click to collapse
have u try install new PG58IMG
with firmware 3.32 in an 4ext recovery in then it will start up in recovery again
Jeeez guys. He can't flash a PG58IMG because he CANT GET TO BOOTLOADER! I'm sorry I don't have am answer for you bit I want these people to stop giving you dumb answers that may lead to false hope. It might be bricked. I can't see anything you could do. Sorry
Sent from my HTC Sensation Z710e using XDA
what is the phone detected as when you connect it to your computer?
Sensation-al! said:
Jeeez guys. He can't flash a PG58IMG because he CANT GET TO BOOTLOADER! I'm sorry I don't have am answer for you bit I want these people to stop giving you dumb answers that may lead to false hope. It might be bricked. I can't see anything you could do. Sorry
Sent from my HTC Sensation Z710e using XDA
Click to expand...
Click to collapse
Thanks !! finally for getting it! The screen is just blank.. I can't get into bootloader!
RussianBear said:
what is the phone detected as when you connect it to your computer?
Click to expand...
Click to collapse
The phone is not detected on the PC!! I am afraid, the phone might be bricked.
I hope i can get get it repaired in warranty!!
guptadh said:
Guys - I need help. I think i just blew my phone.
I flashed THE Sense-O-Maniac ICE ROM after a clean wife and my phone wouldn't boot. It kept getting stock on the Beats Logo. So I rewiped everything and reflashed this ROM. - Same result.
I then thought, maybe I should also update the firmware, though I am pretty sure, that my firmware was up to date.
So i reflashed the firmware on phone but it still wouldnt boot.
I took the memory card out and deleted the the firmware file so that I could not flash another rom. But when I tried to boot in Recovery my screen just went blank.
JUST BLANK
When I switch my phone on, I get a blank screen. The screen does light up though, but nothing shows.
If i connect the phone to USB, then the screen again lights up, even without the batter.
Has my phone gone poof??? Please help.
Click to expand...
Click to collapse
Sjeez mate, what is your problem?
Posting here and in my thread with the same issue.
Without any detailed issue report.
I offered my help in my thread and tried to contact you for several days now via PM.
So i can help you out of this mess via Talk or IRC.
But if you fail to reply to me which i see as not accepting my help.
Sort it out for your self and going on by nailing me down.
But don't say i didn't want you to help.
With regards,
The cook of this rom who seems to killed his phone.
Okay, so yesterday my phone broke. Basically what happens with my phone is that when I turn it on, an image of static appears onto the phone. This image doesn't leave the screen, you can't interact with the phone, basically you can't do anything because the phone will boot up but then the image of static appears. (Home, Menu, Back, & Search button do respond though)
There's no visible physical damage on the phone but I do hear a bit of rattling inside when I shake the phone.
I ordered my new phone last night, I receive it today and now I have to return my damaged one. Here's the question, I had the latest Android Revolution HD on it, it was rooted & all and I'm wondering, even though you can't interact with the phone, will T-Mobile void my warranty if they repair it, turn it on and find out the new "mods"?
Since I can't interact with it, I can't delete anything or reset anything.
Thank you for your help. (Please move if in the wrong section)
I know this sounds horrible but I wouldn't give it a shot. I would make sure the phone is bricked and then send it just to cover my ass. Is it wrong yes, but the phone doesn't work properly as it is. Do I feel guilty? No, I pay insurance for the dang phone all year.
-Just my 2cents.
No, I feel no guilt at all whatsoever. But, how exactly do I brick the phone if I can't do anything with it? I can only turn it on and look at a screen of static.
CGCR said:
No, I feel no guilt at all whatsoever. But, how exactly do I brick the phone if I can't do anything with it? I can only turn it on and look at a screen of static.
Click to expand...
Click to collapse
There are many ways to do so, just do what is said not to do. Normally that does it. Or you can risk it being sent back to you.
This is what I would do, I would download the latest RUU from here. Then I would boot the device into Hboot by powering on the device and holding the volume down button down. Now I know you say you can not see the screen, but when the menu of Hboot comes upit will be on fastboot so all you will have to do is hit the power button. Then connect the device via USB to your computer then run the RUU. When the RUU is done you will be on complete stock.
Now if you really want to brick the device just wait until the RUU is flashing the Radio, or just flash a Radio, and pull the USB cable out while it is flashing the radio. This will for sure hard brick the device.
I'm cracking up reading this thread on, basically, how to properly brick your phone.
From what I've read formatting your sd card with an old version of Cyanogenmod 9 works great..
Sent from my HTC Sensation Z710e using XDA
like mentioned earlier, pull the battery during a radio update, this will most likely hard-brick it
if the screen is damaged but the phone is still functioning you should be able to get into hboot and install a radio
T-Macgnolia said:
Now if you really want to brick the device just wait until the RUU is flashing the Radio, or just flash a Radio, and pull the USB cable out while it is flashing the radio. This will for sure hard brick the device.
Click to expand...
Click to collapse
Pulling the USB cable won't do a thing. The radio .img is sent to the phone, then written.
It's a battery out job halfway through to kill it.
Rusty! said:
Pulling the USB cable won't do a thing. The radio .img is sent to the phone, then written.
It's a battery out job halfway through to kill it.
Click to expand...
Click to collapse
lol yea i was wondering about that one too.. usb cable has no affect on it
Rusty! said:
Pulling the USB cable won't do a thing. The radio .img is sent to the phone, then written.
It's a battery out job halfway through to kill it.
Click to expand...
Click to collapse
Well this is news to me, please link me to something that I can read more about this. I thought the image files were written as the RUU sent them to the device.
My source is watching the output of fastboot commands, and the progress bars in HBOOT, not articles I'm afraid
You could install a tablet ROM. That would for sure brick it, right?
Sent from my HTC Sensation Z710e using XDA
what firmware/hboot version was on your warranty replacement when they sent it?
T-Macgnolia said:
This is what I would do, I would download the latest RUU from here. Then I would boot the device into Hboot by powering on the device and holding the volume down button down. Now I know you say you can not see the screen, but when the menu of Hboot comes upit will be on fastboot so all you will have to do is hit the power button. Then connect the device via USB to your computer then run the RUU. When the RUU is done you will be on complete stock.
Now if you really want to brick the device just wait until the RUU is flashing the Radio, or just flash a Radio, and pull the USB cable out while it is flashing the radio. This will for sure hard brick the device.
Click to expand...
Click to collapse
You are correct. If you are using a RUU, then you can just pull the cable. If you are just flashing a radio file located in your SD Card, then you need to pull the battery.
I know this title comes up a lot but I can't seem to find my problem.
I wanted to go back to the stock rom and I used the proper RUU but totally forgot to use the S-ON tool before hand. It installed successfully but now I get a solid amber light and so far I got my inspire to boot once only to get stuck on the splash screen with it vibrating non-stop.
And now it just vibrated once, went to a black screen and then shut off. I really don't know what to do since I can't even get to HBOOT nor will the computer recognize it.
I've done numerous batter/sim card pulls as well as clean them out.
Any help would be greatly appreciated
Have you tried booting into the bootloader and doing a factory reset?
Sent from my Inspire 4G using XDA
I think he was referring to the bootloader as HBOOT. I had this problem while rooting my sisters Inspire. Might be a corrupted bootloader.
Sent from my Inspire 4G using xda premium
lay012 said:
I think he was referring to the bootloader as HBOOT. I had this problem while rooting my sisters Inspire. Might be a corrupted bootloader.
Sent from my Inspire 4G using xda premium
Click to expand...
Click to collapse
Last I remember my bootloader was TWRP which I guess I had accidentally installed somehow. If you think its a corrupted bootloader how would I go about solving this, if there is a solution?
moutansos said:
Have you tried booting into the bootloader and doing a factory reset?
Sent from my Inspire 4G using XDA
Click to expand...
Click to collapse
Never do a factory reset on a S-OFF device....it will jam u up.
greggyt79 said:
Last I remember my bootloader was TWRP which I guess I had accidentally installed somehow. If you think its a corrupted bootloader how would I go about solving this, if there is a solution?
Click to expand...
Click to collapse
It seems that the RUU you flashed was a Froyo one and your phone was running GB so you messed the bootloader. Hit the Hack Kit IRC channel (is in the OP thread) and we will lend u a hand to fix that....
Alright so I went to the IRC and they told me they couldn't help because it did not deal with the hack kit, fair enough.
I have been able to get the phone to boot after waiting for about 10 minutes but I cannot get to the bootloader. I tried rooting the phone again this way I can turn s-on then flash the stock rom again but the phone ends up not being detected half way through the process.
I really don't know what else to do...
Forgot to mention, now my inspire boots but then fades to a greyed out screen. My computer recognizes the phone as something occupying the usb port but is not accessible. Wish the phone had a physical reset button somewhere that i can poke with a paperclip...
Sent from my SAMSUNG-SGH-I897 using XDA
greggyt79 said:
Alright so I went to the IRC and they told me they couldn't help because it did not deal with the hack kit, fair enough.
I have been able to get the phone to boot after waiting for about 10 minutes but I cannot get to the bootloader. I tried rooting the phone again this way I can turn s-on then flash the stock rom again but the phone ends up not being detected half way through the process.
I really don't know what else to do...
Forgot to mention, now my inspire boots but then fades to a greyed out screen. My computer recognizes the phone as something occupying the usb port but is not accessible. Wish the phone had a physical reset button somewhere that i can poke with a paperclip...
Sent from my SAMSUNG-SGH-I897 using XDA
Click to expand...
Click to collapse
Greggyt, Hit the IRC Channel again,.....it was a rough day and we were a bit pissed. I just connected after you were gone....=0) just hit the channel again....
glevitan said:
Greggyt, Hit the IRC Channel again,.....it was a rough day and we were a bit pissed. I just connected after you were gone....=0) just hit the channel again....
Click to expand...
Click to collapse
I will get back on the IRC this evening when I get home from work thanks again!!!
Does it say anything about QHUSB_DLOAD USB device being connected?
I ran into a similar problem not too long ago, immediate vibrating followed by a solid amber light and no phone activity (nothing on the screen at all). I knew I had a backup in Recovery, but I couldn't even get into recovery.
In order to work around this, I did the following steps.
1. Deleted the PD98IMG file from my SD card (so I could get to recovery once I made it to the bootloader).
2. Take out the battery, then put it back in.
3. Plug in the phone, and let it sit for a few minutes.
4. Start into bootloader (hold power + Volume Down)
Now, in my case I was just trying to get back into recovery. if you don't have a working recovery, or no ROM to flash, you'll want to grab a few RUU 's to try from the bootloader. Try stock GB first, then try a stock Froyo just for the heck of it.
Hope this helps! Good luck to anyone else that's stumbled into this problem.
side note: I've also heard of this "power problem" occurring to other people without bootloops or screwed up bootloaders: which is solved by doing steps 2 and 3, then it'll boot up normally.
help
im having same issue i have gb stock and i accidtly did froyo ruu phones power bottun does nothing i have to plug it into computer and it will get solid amber light then eventually it either brings up battery charge icon and then if i press power button or unplug it. it just shuts off the i plug it back in and wait sometimes white htc screen comes up and it vibrates for a while then boots ad works like nothing is wrong but i cant flash gb ruu when i try to do that or re root and go to recovery to reistall ics that is on my sd as soon as phone restarts during process it doesnt reboot then i have to go threw whole procss of trying to get it to boot back up
glevitan said:
Never do a factory reset on a S-OFF device....it will jam u up.
It seems that the RUU you flashed was a Froyo one and your phone was running GB so you messed the bootloader. Hit the Hack Kit IRC channel (is in the OP thread) and we will lend u a hand to fix that....
Click to expand...
Click to collapse
im new to this site but i did exactly what you said in your post and now my inspire wont reboot unless i go threw a few hour process of plugin my phone in and i get solid amber light for like 5 min then a battery charge screen comes up then i have to unplug my phone and plug it back in the last time i did this it took about 8 hours of tryin until it finally got amber light for like 5 min then started vibrating for a min or 2 then it booted up and its bin workin fine for like a week now ive tried to reflash gingerbread ruu ive tried doin upgrade from my phone and tried reroot but as soon as it shuts down to start upgrade my phone is off and wont reboot