My phone runs perfectly fine until I enable Gps location. Once I enable GPS location, it freezes, then it reboots my phone and it slowly do a system check, then it continuously rebooting the lg logo screen. I tried taking out the battery and put it back in, even took out my battery for a day and it still does the same. I'm not sure if it's the hardware problem, but it's a pretty rare case, since I read most of the threads in forums, people said it can be fix once you pull out the battery, but somehow it's not working for me. Anyone knows the reason why? Btw, my phone is not rooted or used any 3rd party program.
Ah. Posted too soon. There's a master reset that I believe is Power and Volume Up. Try that.
Unfortunately, it's still not working. Is there any other possible way? Or else I have to call in and return it.
Try turning off the phone, then press power + vol down and hold it until you see the word android. This should do the factory reset.
efrem989 said:
My phone runs perfectly fine until I enable Gps location. Once I enable GPS location, it freezes, then it reboots my phone and it slowly do a system check, then it continuously rebooting the lg logo screen. I tried taking out the battery and put it back in, even took out my battery for a day and it still does the same. I'm not sure if it's the hardware problem, but it's a pretty rare case, since I read most of the threads in forums, people said it can be fix once you pull out the battery, but somehow it's not working for me. Anyone knows the reason why? Btw, my phone is not rooted or used any 3rd party program.
Click to expand...
Click to collapse
It sounds like the permissions are not correct, or perhaps that your ROM was not flashed correctly. I have seem this problem happen numerous times due to bad firmware flashes or ROM issues. I would just download a new copy of the latest CM 7 ROM or whatever your favorite ROM is and flash it through CWM.
Thanks guys for the help. I found out that you have to hold down first then power button for around 30 second and then the droid animation comes out. I was so close to returning it. Thanks!
Related
It has started for about 2 weeks now. The phone pops up a message saying for me to save and that if I want to save before I turn off. If I try to turn off the screen, the top button wont react. I have to press twice to get it off, then it comes back on and it gives me the same message. I have to soft reset it to get it working again.
I also did a ROM update and that reset it everything, but then it started doing it again.
It is hardware right?
So this is becoming very annoying this ****e keeps popping up and its draining the ****e of my battery. Anyone has had this problem.
I don't really have a solution for this, but I had the same and also was thinking it's hardware related...
I tried opening up the phone and cleaning it out, first with no noticeable effect (except I broke my speaker wires, be carefull with that if you ever decide to open up your phone), but it seems like something went right, because I only rarely have that problem now ...
One theory I had was that water might have sipped in the button or something, so I'm leaving it out the bathroom when I'm taking showers now.
Anyway, if anyone else has had this problem and did something about it, I'm also very interested to know...
Actually to me, it sounds like some app has gone rogue. Have you installed or modded anything after you flashed the updated ROM? I would suggest if you have anything of importance, that you save/backup that information before performing a hard reset as this will reset everything back to stock for the ROM that you are using. I am using the ROM in my sig/signature and I am not experiencing any of the issues you are describing. It is a custom/cooked ROM so you will need to have HARD-SPL'd your device before you flash. Also, there is a CDMA version on PPCGeeks if you have that type of device.
n-Joie! (Enjoy)
So my Nexus S 4g been mighty stable, til this morning. i check my bank account on my phone then all the sudden, the back button starts blinking like crazy, and everything goes back if i open anything, and the vibrate feedback can be felt like rapid fire. So I hold the button so I can actually power off the phone into recovery.
Its still blinking, so I hold it down so it sends only one signal, so i can change my kernel back from Netarchy 1.3.7 to 1.3.6 where it still does it. Repeat to Mathkids. I also wiped the cache partition, and dalvik cache for this one. havent tried stock yet.
Anyone ever have this problem. Its still doing it. Thinking about going to stock and returning phone.
And if I do return it, do I have to unroot, and relock the bootloader?
tried stock kernel, did a few backups, formatted everything agian, turned back to stock and it hasnt stopped.
did notice tho if my hand or thumb got close to the back button, but didnt touch it, it would stop blinking. maybe it needs a heat sensative calibration? it wont stop flickering no matter what
It seems to be related to this issue: www.google.com/support/forum/p/Google+Mobile/thread?tid=49e8ca84071d51a4&hl=en
Im having exactly the same problem, but with the searh button. In the Google thread a Google employee has replied, and according to him they're working on a fix (software related). This was posted a couple of weeks ago, i bet the fix is issued in 2.3.5, set to rls in the upcoming days.
For me the search button flickering seems to be related to how long the screen has been on, i.e. how warm it is. I can use it perfectly for 20-30min, but then its unusable for the next five. I discovered the relationship between screen on time and the flickering like a day ago and it may be incorrect. The Google employee says it is a software issue, but i dont hold my hopes high.
I was having this problem with the search button.
I goofed up something on the phone and ended up reflashing it back to stock like 5-6 times in the course of a night.
Ever since then, I havent had the issue pop up even once.
I also have read that it has to do with the NFC contacts on the battery cover. Someone was able to supposedly fix this by preventing the contacts from touching their corresponding contacts on the phone.
Hey guys,
I have a really strange display issue with my Galaxy R.
I'm on CM10.1 nightly and already tried different nightlies with factory reset and wipe data/cache.
If the phone is not used for a while (sometimes even after 30 minutes), meaning it is on and screen is off, the display won't turn on anymore.
So I press the power button and the capacitive buttons light up, but the screen stays completely black.
Today I noticed that I can even use the touch screen and I could hear all sounds, I even managed to open the dialer and start typing blindly and it would make the dial sounds.
But whatever I try, the screen won't turn on.
Also, it seems when I'm connected to a charger and/or connected to wifi, this problem doesn't seem to occur.
Then I have no choice but to remove the battery, but then often I can't even start the phone.
Sometimes it takes some minutes, sometimes a really long time until I can start it again.
Usually the battery isn't drained, this only happened once.
This occurs after I dropped the phone twice, so it might be related to that.
(Though before I've also dropped it and this never happened.)
Any ideas?
flash stock ics and see if problem persists.
once i flashed a custom rom and faced this issue, reverted to stock and now my device is running with zero issues.
Nikhil said:
flash stock ics and see if problem persists.
once i flashed a custom rom and faced this issue, reverted to stock and now my device is running with zero issues.
Click to expand...
Click to collapse
I tried to find the stock rom online, but all links seem to be down.
Do you know where I can get it?
wasabah said:
I tried to find the stock rom online, but all links seem to be down.
Do you know where I can get it?
Click to expand...
Click to collapse
You need to register and then download from here.
Thanks for that, I installed newest stock rom.
Could boot fine, set up the phone, put it to the side.
One hour later I checked it - same problem again.
Capacitive buttons flaring up, screen not.
Thanks for that, I installed newest stock rom.
Could boot fine, set up the phone, put it to the side.
One hour later I checked it - same problem again.
Capacitive buttons flaring up, screen not.
Then you should visit SSC. They can only repair your device.
Bought a Nexus 5 about 6 months ago USED. It has been amazing. I got the latest OTA a week ago or so, not sure if that has anything to do with current issues.
About 2 days ago started randomly restarting. Today, it shut down and has been in continuous loop restarting. I see "Google" and maybe even the boot dots loading, then it is off. Three seconds later, starts again and repeats. Never makes it all the way into Android system. I let it sit for a while and when I pick it up, without touching any buttons, it repeats all of this. I suppose it is probably dead in general, but I don't know. Do you guys have any ideas? Again, I bought it used and from a ma/pap store who said they buy 100 in bulk, which made me skeptical, but they also had a 60 day guarantee and it was amazing the first 60 days and even after. It has been error free for 6 months, so I don't know if this is just a random issue or if the previous owner dropped it in a lake and I got lucky, or what. FWIW the damn thing has been in a case and never dropped, so it isn't anything that I have done I don't think. Thanks for any help.
edit: never rooted, never messed with, always been stock
Another user reported some instability since the last OTA update.
Flashing the full factory images did the trick.
a friend of mine gave me his nexus 5 to repair and its doing something similar. He had ir rooted and on latest 5.1.1 (i think). Either way, he said it was randomly locking up and rebooting. When i got it it had the red blinking light when plugged so i got a new battery. That got fixed but then the constant bootloop showed itself. I flashed TWRP (many versions, 2.6.3.1; 2.7.1.1; 2.8.7.1; the one that worked best was 2.7.1.1). So, once in twrp wiped, pushed cm 12 snapshot, flashed it, pushed gapps, falshed, pushe supersu flashed. Started the system. That precise order of things (ie: pushing flashing, then pushing something new and flashing it) was what gave me best results to actually boot up at least once. Once booted up and logging in and everything to cm i had some sort of stability (even rebooting and powering off) but i think that everything went wrong when i plugged the phone to the computer and it was back to bootloops and not even getting to the recovery. Flashed everything again. Didnt work. Had to leave the phone sit for a while (without the back casing) before trying again, in order, before getting any success. Im starting to think of ovrheating but it doesnt even get that hot...
Dunno if you guys have any ideas on this. Or if i can give you mor details to help us out.
Regards!
Looks like I'm having a similar problem to what is described here, as well as http://forum.xda-developers.com/google-nexus-5/help/bootlooped-dont-how-to-enable-debugging-t3215951
I've had one of my Nexus 5 phones running OmniROM 5.1.1 for some time now, very stably. After trying out the Marshmallow preview and going back to that ROM, I started having spontaneous hard reboots and hard crashes. The phone would often boot loop before even getting to the OmniROM boot animation. It was also very recalcitrant about entering and staying in the boot loader, rebooting spontaneously shortly after rendering the boot loader screen. I was occasionally able to "grab" control long enough to get it to boot into TWRP, from which a boot to Android seemed to usually get it out of the loop and into running Android.
I've flashed back the boot loader and baseband from factory-stock 5.1.1 LMY48M (HHZ12h and 2.0.50.2.26) using the flash-base.sh script from a freshly downloaded and extracted hammerhead-lmy48m. Things appeared to be OK last evening and this morning, but things got worse today.
Now the phone is in a state where it is not responsive to the power button when unplugged. I can hold it down for 30 seconds with no response.
If I plug in USB, it spontaneously starts rebooting, not showing more than about two seconds of the Google boot loader screen. If I hold the down-volume button, I can get the boot-loader screen, but no matter how fast I try to be, I can't select anything more than "Restart bootloader" (or "Power off") option before it spontaneously reboots (to boot loader).
As far as I know, the battery had a significant charge before this started happening.
I see the same behavior if the phone is connected to a USB charging source, rather than a USB port.
I've tried pulling the SIM, but that doesn't change the behavior.
adb wait-for-device never returns, so poking it over adb doesn't seem to be an option.
fastboot devices also doesn't see the phone, for the brief time the boot loader is running.
Any suggestions on how to get this into the boot loader so I can at least re-flash it?
Nexus 5 D820(E) 32 GB
Edit:
WaxLarry said:
In my opinion your problems seems power button's related.
Click to expand...
Click to collapse
Trying to see how I can "clean" or "clear" the power button now.
Edit:
Paul22000 said:
This morning my Nexus 5 was turned off all of a sudden after not having used it for 20-30 minutes. I held the power button and nothing. I plugged it into power and the "Google" screen appeared. It then went into a reboot loop on and off, on and off, on and off. I held the Volume Buttons and it went into fastboot, but then boot looped out again and again. Searching on Google yielded that this was indeed a common problem. [...]
Click to expand...
Click to collapse
Edit: Repeatedly pressing the power button seems to have temporarily allowed a boot to Android.
In retrospect, I had noticed over the last few days that the phone didn't seem to respond properly to the power button, either "ignoring" it, or when a second press got things started, it would unexpectedly come up with the long-press-volume menu.
One link on how to replace the power switch yourself is http://protyposis.net/blog/replacing-the-nexus-5-power-button/
Ok @jeffsf keep going on this thread. I had the same damn experience, that ended with RMA. LG said that the problem is related to some tension change in the power button. After the RMA I used the phone totally stock and never had a problem. Two months ago I switched to blu_spark kernel and some weeks after i noticed some problem. When I pressed the button to lock the screen, phone locked itself and then screen turned on, sometimes showing the shutdown option. So i understood that something was happening to the power button. I tried to overvolt with a +5mV on general offset and since then i never had problem. If you can enter recovery or bootloader i suggest you to flash some kernel with volt change support and then overvolt the general offset... and keep finger crossed
jeffsf said:
Looks like I'm having a similar problem to what is described here, as well as http://forum.xda-developers.com/google-nexus-5/help/bootlooped-dont-how-to-enable-debugging-t3215951
I've had one of my Nexus 5 phones running OmniROM 5.1.1 for some time now, very stably. After trying out the Marshmallow preview and going back to that ROM, I started having spontaneous hard reboots and hard crashes. The phone would often boot loop before even getting to the OmniROM boot animation. It was also very recalcitrant about entering and staying in the boot loader, rebooting spontaneously shortly after rendering the boot loader screen. I was occasionally able to "grab" control long enough to get it to boot into TWRP, from which a boot to Android seemed to usually get it out of the loop and into running Android.
I've flashed back the boot loader and baseband from factory-stock 5.1.1 LMY48M (HHZ12h and 2.0.50.2.26) using the flash-base.sh script from a freshly downloaded and extracted hammerhead-lmy48m. Things appeared to be OK last evening and this morning, but things got worse today.
Now the phone is in a state where it is not responsive to the power button when unplugged. I can hold it down for 30 seconds with no response.
If I plug in USB, it spontaneously starts rebooting, not showing more than about two seconds of the Google boot loader screen. If I hold the down-volume button, I can get the boot-loader screen, but no matter how fast I try to be, I can't select anything more than "Restart bootloader" (or "Power off") option before it spontaneously reboots (to boot loader).
As far as I know, the battery had a significant charge before this started happening.
I see the same behavior if the phone is connected to a USB charging source, rather than a USB port.
I've tried pulling the SIM, but that doesn't change the behavior.
adb wait-for-device never returns, so poking it over adb doesn't seem to be an option.
fastboot devices also doesn't see the phone, for the brief time the boot loader is running.
Any suggestions on how to get this into the boot loader so I can at least re-flash it?
Nexus 5 D820(E) 32 GB
Edit:
Trying to see how I can "clean" or "clear" the power button now.
Edit:
Edit: Repeatedly pressing the power button seems to have temporarily allowed a boot to Android.
In retrospect, I had noticed over the last few days that the phone didn't seem to respond properly to the power button, either "ignoring" it, or when a second press got things started, it would unexpectedly come up with the long-press-volume menu.
One link on how to replace the power switch yourself is http://protyposis.net/blog/replacing-the-nexus-5-power-button/
Click to expand...
Click to collapse
I got a notification for this post since you quoted me. I'm not sure if you're having the same problem but I'll tell you what happened to me, just in case. I called T-Mobile and they referred me to the nearest 3rd party phone repair shop. I went there and after an evaluation, the repairman told me the power button on my phone was indeed broken. They replaced it for $55.
The story doesn't end there though. I took my phone home and a few hours later I tried to use bluetooth and it didn't work. I took it back and found out that unfortunately, when the guy replaced the power button, he inadvertently broke the bluetooth. There's no way to fix bluetooth without replacing the motherboard entirely, which would cost $200. I'd rather buy a new phone at that point since my Nexus 5 was getting old. He refunded me, which was nice. At least the power button worked so I could use my phone. Bluetooth isn't as valuable as being able to you know, turn on the phone, so at least it was a net gain.
After that, I purchased a Nexus 6 and rooted it so I could use double-tap-to-wake (along with the automatic screen on when you pick up the Nexus 6). I also use the following app in order to turn off the screen by swiping up from the home button (I don't care about losing the shortcut to Google Now): Screen Off and Lock
I can now literally go weeks without using the power button on my Nexus 6. (I literally only use it when tap to wake sometimes becomes unresponsive which is rare.)
Bottom line: I will never buy another phone without tap to wake functionality! :good:
A local repair shop here indicated that one sometimes does changing the power switch resolve the issue. They have seen situations where the issue appears to be one of the power-management ICs. Just something to be aware of when examining the potential cost of a repair and who you would have do the work.
The problem I have is with the galaxy z flip 3, it worked just fine inthe morning but after it ran outta juice and I charged it to a certain percentage, it stopped working properly, and got into an infinite boot loop, I tried forcing it to restart by long pressing volume down+power , but it didn't work, then I tried opening the recovery by long pressing on volume up+power and yet it also didn't work (I think that maybe it's because it was trying to boot at the time), so have you guys any solutions , please do help me cuz this phone really is important and with all honestly, isn't even mine XD, I'll be waiting for an answer
Your failsafe options are contact Samsung or do a factory reset (and then potentially contact Samsung).
If you can't boot it to anything, the only real option you have is to flash firmware, which likely won't help without wiping.
Unfortunately, not booting doesn't have a whole lot of options that don't wipe data without being rooted. Even then, you'd need recovery.
I see, then I may consider giving it to samsung, as long as they won't reset it, cuz the only reason why the phone is so important is because of the data, altough, isn't there any other way to acess recovery? Cuz I had this problem with the s10 before and I fixed it somehow (a certain Bixby key combination), but this time it seems there isn't any hidden combination.
Samsung is going to reset it. It's a required first step for them to do any work on it, even if the work has nothing to do with the software. What may help find a way to recover the data is starting with how it got to this point. Did you install anything new, change any important settings, or anything else that could have been a part of the issue? If not and it is an unexplained hardware failure, the data is likely gone already.
If it's something you might have installed or changed, it's possible that putting the phone in safe mode and undoing it may solve the issue and let you boot normally.
Booting into Safe Mode:
Make sure the device is powered off (charging is ok, as long as it is not currently trying to boot)
Hold the side key to power on and continue holding until "SAMSUNG" appears and the device vibrates
Immediately release the side key and begin holding volume down until boot completes
If the device has booted into safe mode, you will see a translucent "Safe Mode" in the bottom left
twistedumbrella said:
Samsung is going to reset it. It's a required first step for them to do any work on it, even if the work has nothing to do with the software. What may help find a way to recover the data is starting with how it got to this point. Did you install anything new, change any important settings, or anything else that could have been a part of the issue? If not and it is an unexplained hardware failure, the data is likely gone already.
If it's something you might have installed or changed, it's possible that putting the phone in safe mode and undoing it may solve the issue and let you boot normally.
Booting into Safe Mode:
Make sure the device is powered off (charging is ok, as long as it is not currently trying to boot)
Hold the side key to power on and continue holding until "SAMSUNG" appears and the device vibrates
Immediately release the side key and begin holding volume down until boot completes
If the device has booted into safe mode, you will see a translucent "Safe Mode" in the bottom left
Click to expand...
Click to collapse
Well I just asked the original owner (my mother), and apparently she doesn't remember downloading anything new into it, and it just went crazy by itself, also something else I wanna note, I tried charging it and it booted into recovery all by itself, I taught it was weird but Still went and wiped the cache and then when I tried restarting it it suddenly ran out of juice once again, also, it's second display shows some weird curruption/bug or glitch-like lines. So based off of this, can you really find the origin of this problem and if there is really any hope of saving it's data XD. Thank you btw, and once again, I'll be waiting for an answer
There are hundreds of reasons it could do that, including a faulty board. Thanks to the removal of physical sdcard support, you'd need to get it to boot into something with at least adb support to pull anything off it. Stock recovery doesn't provide any ways to perform a decent backup, but it sounds like the only option that wouldn't wipe the device didn't work.
I see, alright, thanks a lot, I'll consider resetting it
It may be worth trying to flash firmware first. Go into it knowing it may reset the device or leave you needing to reset it, but it doesn't hurt to try if you run out of safer options.
Same here, same symptoms, happened in front of my wife's and eyes face. We are fairly techy and understand our way around our devices. We also noticed the device crashed then would make it all the way to the home screen launcher and before catching signal the crash would cause a restart at that point I went in and did a cash swipe rebooted right back into recovery by itself then I unplugged the cable and it was acting as if it has a dead battery but when the cable was last plugged in during a couple of crash and then restarts all the way to the home screen I know the battery was at 70 something percent. My next step is going to probably be flashed the current firmware that just released on top of it as a dirty flash and see if I can get it to boot. If not then I'm going to do a hard reset and see if that works. When plugged in it automatically starts exhibiting symptoms as if the buttons are stuck. The devices in the OtterBox and it's fairly brand new I would say mint. Not dirty or any smudges either. all I'm saying is I'm one of those type of technicians that say yeah right when people say it just happened I don't know where but this actually happened I don't know when I was able to witness it. I'll come back and let you guys know what works and what doesn't. (By the way excuse my grammar I was voice typing while driving )
ariveraiv said:
Same here, same symptoms, happened in front of my wife's and eyes face. We are fairly techy and understand our way around our devices. We also noticed the device crashed then would make it all the way to the home screen launcher and before catching signal the crash would cause a restart at that point I went in and did a cash swipe rebooted right back into recovery by itself then I unplugged the cable and it was acting as if it has a dead battery but when the cable was last plugged in during a couple of crash and then restarts all the way to the home screen I know the battery was at 70 something percent. My next step is going to probably be flashed the current firmware that just released on top of it as a dirty flash and see if I can get it to boot. If not then I'm going to do a hard reset and see if that works. When plugged in it automatically starts exhibiting symptoms as if the buttons are stuck. The devices in the OtterBox and it's fairly brand new I would say mint. Not dirty or any smudges either. all I'm saying is I'm one of those type of technicians that say yeah right when people say it just happened I don't know where but this actually happened I don't know when I was able to witness it. I'll come back and let you guys know what works and what doesn't. (By the way excuse my grammar I was voice typing while driving )
Click to expand...
Click to collapse
Hello everyone just a quick update. Once I got home I plugged the device into a Samsung fast charger and Samsung OEM USB type-c cable and realize the device booted all the way to the home screen but register the same battery level as I mentioned above. Device was working as if nothing happened to it. So I updated all the apps on the Galaxy store then updated all the apps left over from the Google Play store, I then proceeded to check for a firmware update because I know the April update just released and installed the update with no issues. Updated the apps that needed to be updated again somehow there's always something and unplug the device from the power cable. Everything was working if no issues about half hour later the device cuts off and does not want to power on. FYI I already had my wife contact T-Mobile and get a warranty replacement we only paid $5.00 so my thoughts and conclusion on what's going on something happened to the battery or it's defective. Btw we only use Samsung OEM cables and equipment at home and in the car while connected through Android auto. it's only working while being plugged in it's not charging all the way even though it's registering it's charge level while the device is on.