Hello, everyone.
Ok I'll explain the situation, then explain how it might of happened.
My phone will not turn on. It is stuck at the white at&t screen.
How It Happened:
I went out camping with family. We decided to go boating, No I didn't dunk the phone in lake water. I was listening to music on the boat, I noticed that an error message kept coming up. It said something along the lines of "com.android.phone has stopped unexpectedly, please try again." I would get this message every other second. So I booted the phone into clockwork recovery, hoping to recover an old back up of my system. It didn't work, I got some other error message saying it couldn't recover. Being desperate, I was like, "I'll just flash a different ROM!" I tried flashing cognition. It said it installed correctly. I was stoked! I rebooted my phone. I noticed it still showed the cyanogenmod 7 boot animation, so of course it didn't flash the other ROM. I decided to reboot my phone again. This time instead of turning all the way on, it stopped at the cyanogenmod animation, then restarted. It looks as if, right before it would restart it looked like a "loading screen" in clockwork recovery. It rebooted continually for the next 10 minutes until I took the battery out. I then tried to recover the phone again. Then I rebooted my phone, but then it froze at the at&t white screen. I left it like that for around 20 minutes. As we were coming back to the dock, I decided that I had enough messing with it and turned it off.
Any ideas. Did I do what they call "Bricking" and if so, what can I do to fix it?
And if not what do you think I did?
Thanks for help. I am getting a new phone in 2 days.
Btw, I am running through AT&T, and I own a sumsung captivate.
Well, the phone does sound like it has a pretty solid issue, I would have assumed that the flashing would have fixed it. There are probably other things you can try to get it running, but honestly after everything you've done, I would just Odin the phone. There are plenty of posts in the dev forums about running Odin. You download it on PC, plug the phone into download mode, click the button in Odin and after a bit, bam you are back to stock 2.1 like it's right outta the box. Then the obvious, root/rom. Unless you are desperate to get data off the phone I would just use Odin.
Someone may have a better answer, but weird stuff like that, I don't bother with trial and error. Just make sure if you do go with the Odin route, follow instructions, or you definitely WILL brick the phone. If you need the link because you actually can't find it on the forums (sigh) then I can send it tomorrow, it's bookmarked on another PC. Hope this helps
DanBroChill said:
Well, the phone does sound like it has a pretty solid issue, I would have assumed that the flashing would have fixed it. There are probably other things you can try to get it running, but honestly after everything you've done, I would just Odin the phone. There are plenty of posts in the dev forums about running Odin. You download it on PC, plug the phone into download mode, click the button in Odin and after a bit, bam you are back to stock 2.1 like it's right outta the box. Then the obvious, root/rom. Unless you are desperate to get data off the phone I would just use Odin.
Someone may have a better answer, but weird stuff like that, I don't bother with trial and error. Just make sure if you do go with the Odin route, follow instructions, or you definitely WILL brick the phone. If you need the link because you actually can't find it on the forums (sigh) then I can send it tomorrow, it's bookmarked on another PC. Hope this helps
Click to expand...
Click to collapse
No, I got Odin3. Thanks, I got it back to stock. I got my new Cappy today. I'm sending my old one to AT&T and all that. Thanks anyways.
Related
ok so its really only half bricked. it started after i flashed the 1.6ghz ROM...my data wouldnt kick in. a clean wipe and flash, i opened the market to begin my restore of apps and contacts, and when i tried to sign into google, it said "cant establish a reliable data connection" okokok dont panic, i wiped dalvik, and rebooted to no avail i turned 3g on and then off, no go. i tried signing in, and then opening the browser to kick the 3g into drive, and still no joy. i noticed that the upload arrow was the only one being colored in. i called sprint, and they had me do a master reset and STILL nothing. so in a last desperate attempt, i am trying to ODIN and it keeps getting stuck on factoryfs. i googled it and found a few threads involving it, but no real solutions (i rebooted and changed ports before even googling it)
im sorry if this is uninformative ive been working on it for 2 hours and my brain is numb so please if you have any ideas i beg you to share cause im starting to get worried
obliged
ahhh im sorry i hit new thread in the wrong tab
igotsthemagicinme said:
ahhh im sorry i hit new thread in the wrong tab
Click to expand...
Click to collapse
use odin from the vzw fascinate thread....just use the epic pit...I dont know why, but this happened to me also, but the odin for the fascinate with the pit for epic WILL work.
suzook said:
use odin from the vzw fascinate thread....just use the epic pit...I dont know why, but this happened to me also, but the odin for the fascinate with the pit for epic WILL work.
Click to expand...
Click to collapse
hi there i tried this and it didnt work, still stuck on factoryfs
im gunna take that as a hint it might be a bad download of the tar/pit? imma redownload and see what happens
Try a full redownload of the tar. Make sure it's about 255MB or so.
Restart your PC, the phone and Odin. Put the phone into download mode, start Odin, and only THEN plug it into the PC.
I heard that sometimes removing your sdcard before odin may work.. may not do **** but worth a shot. I've had good luck with odin personally.
igotsthemagicinme said:
hi there i tried this and it didnt work, still stuck on factoryfs
im gunna take that as a hint it might be a bad download of the tar/pit? imma redownload and see what happens
Click to expand...
Click to collapse
Okay, I had this happen to me last nite.....Depending on where you got your instructions from you might be putting the TAR file in the wrong section. Please make sure that you are putting that TAR file in the PDA box and not PHONE....I am assuming that around 35% or so it'll just stay at Factoryfs.rfs...Correct? This is probably why so check that out and also make sure that the only two boxes checked on the left are "auto-reboot and debug en"...you should be good to go.
Odin is a very technically retarded program, as it gives limited output as well as ridiculous requirements to get it working correctly. I have had it work flawlessly sometimes and not at all others, so keep at it and eventually it will work, just try every possible combination of settings you can think of and restart the phone/computer multiple times if things still seem to lock up. Hope you get it fixed, I've been there and it sucks!
Sent from my Xtremely Syndicated and Emotionless Epic 4G
I used Odin this morning with no issue at all. I battery pulled, and pulled out my sd and left it out until i got my phone back to factory settings. Also restarted my PC before trying running odin. Worked great for me hopefully will do the same for you.
You know I had this SAME EXACT problem! So im sure you wanna know what was up, well, try going to menu,sdcard: see if the sdcard is greyed out in unmount, and format. If so, re-insert your sdcard.. Hope that helps
Oh BTW, if all your trying to do if go back to stock, all you need is the "MD5 tar file for DI18". Put that file in the PDA section, and over to the left there should be 2 boxes checked, 1 should be "reboot" and the ONLY other 1 should be checked is the "Debug" box! MAKE SURE that no other box is checked. Another thing, you can obtain the "DI18" MD5 tar file from the sticky wicky page....
Ok, check this out. I had the exact same issue. My phone freaked! Lemme ask this, did you phone have problems transferring large files (i.e. roms and such) when you would mount it before? Turns out with me, for whatever reason and I'm assuming software. It was an issue with my computer that screwed me. At least try this, get your laptop or any computer that you haven't used to mod or connect your epic to. Download the Samsung USB drivers to it and odin. I found that Odin3 v1.3 works the best. Here is the zip which has everything you'll need for odin h**p://rapidshare.com/files/429741564/Odin.zip . However you'll have to get the samsung drivers on your own. As soon as I used a computer that I had not used to previously mod my epic before, it worked flawlessly. Just get the phone into download mode. Wait til odin is on and then connect it. Only check debug. You should not need the pit file with this, only move the md5 file into pda. That was all I needed. I hope this helps.
Sounds like you've tried alot of the "standard" fixes. The only thing I don't see mentioned is the usb cable that you used. I've seen numerous posts where a cheap 3rd party cable would cause hangs during the ODIN transfers. Are you using the cable that came with the phone? If so, do you have another good quality cable to try?
Good Luck!
oh wow...all the responses! you guys have been amazingly helpful, ill be forever greatful.
good news! odin decided to work this morning, it was definatly a bad download (the .tar was like 5kb lol) and i got my phone up and running
bad news! still no data. i dont understand how an odin couldnt fix any possible software issues....is sprints 3g down, or is my radio shot??
i can still make calls and texts and receive them, but for the life of me cant sync my contacts and i have about a billion ppl calling my today (my day off )
ahhhhhh
igotsthemagicinme said:
oh wow...all the responses! you guys have been amazingly helpful, ill be forever greatful.
good news! odin decided to work this morning, it was definatly a bad download (the .tar was like 5kb lol) and i got my phone up and running
bad news! still no data. i dont understand how an odin couldnt fix any possible software issues....is sprints 3g down, or is my radio shot??
i can still make calls and texts and receive them, but for the life of me cant sync my contacts and i have about a billion ppl calling my today (my day off )
ahhhhhh
Click to expand...
Click to collapse
I had that problem once, I think is was some stupid fix. I did a couple things.
1. I called sprint and they did a re-activation-- I dont recall that working right off
2. In the browser it asks for your phone number the first time
Http://vision.sprintpcs.com
Then it seemed to work.
After that I have had no problems, even after flashing new roms.
Strange huh.
http://forum.xda-developers.com/showthread.php?t=833608&page=2
I'm assuming I was affected by the network down-age too. But...
You guys are amazing! Really rose up to help me out, I can't believe how great it is to know if someones got a problem, ya'll help. Double thanks to the guy who PM'D me. I'm sure you guys will be glad to know I did indeed get ODIN to work, and my data eventuall came back (almost seems faster, too!). So...idk...group hug! Or something
Would it be wrong to hijack and ask some questions before this gets moved(feel free anytime, mods, and again, my apologies for that) ill just go ahead hehe
I'm looking for an aosp theme. I'm running baked snack, and its performing beautifully, but I don't like the water mark nor the general theme at all. I looked thru all 10 pages to no avail. Any suggestions? If there isn't, that'll be my contribution (meaning ill make one)
Blue led. It seems retarded its only used when the battery is full. Id prefer to have it in reverse...blue for notifications, and blue until its fully charged. Is this possible?
Four buttons in the notipanel. If they were customisable or something, or you could scroll and there was more, id like it...but it seems other han wifi, they chose the 4 shortcuts I use the least. Are these changeable or removable?
I asked this on a while back...about swapping the camera and power button. I find that when its changed in the .kl that when I turn the screen off it turns right back on...and if its off for a while, it lags when being turned on. Has anyone else tried this and suceeded? What was your method?
Thanks again guys!
My turn! Odin not working.
Edit: Never mind. johnyardavid's download of the newer Odin fixed it for me. Thanks so much!
Okay so I was in the process of installing gingerbread on my phone with Odin when my phone just turned off unexpectedly. Not thinking anything of it, I turned it back on to this weird screen and the phone is stuck here. Any help would be appreciated. I have attached a picture of the screen for reference. Thanks.
Don't know if it'll help since I haven't had this problem before but, try removing the battery (just to get rid of that screen for now), then without even turning it on, go straight to Download mode and return it back to stock using GTG's procedure.
Sent from my SAMSUNG-SGH-I997 using XDA
How do I go about doing that? How do I put it into download without turning it on?
Pull Batt, Hold the volume up and down rocker....put batt back in and plug in your USB cable that is plugged into your Computer.
you should be in DL mode after that.
Okay that's what I thought you meant, but I wanted to clarify because I tried that before and I tried it again just now and still the same thing. The screen is slightly different, but basically the same.
does it boot at all, into a logo or anything?
without a method to get to Recovery or DL mode......i would think you needed a Jig to accomplish getting your phone back to a working state.
No it doesn't boot to anything. Just comes on to that screen.
http://forum.xda-developers.com/showthread.php?t=1147636
this is the Jig i was speaking of........otherwise you may just have to return it.
No you don't have to return it. It will go into dl mode. Hold volume up and down and insert USB cable. Open odin and reflash.
That is a static rainbow screen. I ran into that among others while trying to flash it. I just gave up and flashed to stock and reflashed miui. There are some who did have success in getting it to boot but not me.
Sent from my SGH-I997 using XDA App
TOA Duck said:
No you don't have to return it. It will go into dl mode. Hold volume up and down and insert USB cable. Open odin and reflash.
That is a static rainbow screen. I ran into that among others while trying to flash it. I just gave up and flashed to stock and reflashed miui. There are some who did have success in getting it to boot but not me.
Sent from my SGH-I997 using XDA App
Click to expand...
Click to collapse
if you had the same screen/problem how did you get into DL mode to reflash stock.
this may help him out.
Okay so the jig is something that I have to buy? And TOA Duck how did you reflash to stock from this? Thanks.
infamousosiris said:
Okay so the jig is something that I have to buy? And TOA Duck how did you reflash to stock from this? Thanks.
Click to expand...
Click to collapse
you could make it, just resisters and a gutted USB cable. but for 8 bucks to have a DL mode fix is kind of worth it.
i have only bricked my Cappy like that though, and i made one at work.
Goto gtg's ultimate unbrick thread in development and read through the directions for unbricking.
All I did to get into dl mode was pull battery, reinsert battery, hold vol up and down together and plug in USB.
Don't make the mistake I made the first few times trying to get into dl mode and hold power button along with. ONLY hold the 2 volume keys.
I understand where you are coming from. I thought my phone was f--ked too when I got that static screen.
Hope it helps
Edit,.... my dl mode screen looked different than the usual one this time. It looked like a computer and a phone side by side with an ! Between them. No worries its still dl mode.
Sent from my SGH-I997 using XDA App
Okay well I don't know what happened, but I was able to reflash to stock somehow. I did the process for getting to the download screen, but the rainbow screen showed up so I just decided to act like it was there and hit the volume up and it showed up in odin finally and I was able to flash it. Thanks for the help everyone!
Hand claps, im glad it was an easy fix.
Kudos to you for not freaking out or giving up.
*applause*
Okay I got it working again and reflashed the stock ROM using GTG. But now that its running its running like crap and the second I turn on the phone it gives me like 5 notifications that some apps have stopped unexpectedly and I have to force close them. Not only that, but now every time that I open an app it almost immediately closes saying that it has stopped unexpectedly and needs to be force closed. Any ideas on what might be causing this? I'm thinking that it has something to do with the reflash, but I'm not sure. Oh also on a smaller note, my market app is completely different as far as how it looks. Not a big deal but just thought it was interesting. Thanks.
i always a fan of reflashing.....lol
since you got it past that rainbow of death, i would go back to stock one more time wipe EVERYTHING and go from there....the Force Closes is not a Huge deal. usually happens from a bad install or using TiBu to restore sys data.
so Flash away,
weird screen
that kind of screen happens when you use the lagfix with a rom in 2.2 base and change it from rfs. you have to put it back to rfs and try the rom you installed again or you have to reflash back to stock. This has primarily happened to me when going from a 2.2 base rom to a 2.3 rom
BG: Running Eclipse 1.4 with PBJ kernel. Yesterday I used my phone til it ran out of battery. Out for a few hours and end up at my parents for dinner. Brought the USB cord so i plug it into my Mom's laptop to let it charge over night. I take it off the charger this morning and turn it on...
First thing that happens is it wants me to set up a google account "touch the android" as if I had wiped data. I hit skip, see that one account is still connected, and all my apps are in the drawer. Most of them F/C when I try to run them. So I decide to restore from CWM. Went back to Tweakstock (Guess I never got around to backing up on eclipse) and then went back to CWM and flashed Eclipse again. Now, some android.acore keeps f/cing, as well as all gapps, google framework junk, the eclipse keyboard if i switch from swype, my contacts, etc. Titanium backup doesn't find root. Superuser seems to be working. So I try flashing eclipse again to no avail.
I noticed after this morning that Verizon data widget wanted to be updated. Looked into that a bit and it seems it MAY be to blame, God knows how...
Anyone experience this before? What should my next steps be. I'm thinking back to stock through odin w/ PIT file and work from there?
Tazer2death said:
BG: Running Eclipse 1.4 with PBJ kernel. Yesterday I used my phone til it ran out of battery. Out for a few hours and end up at my parents for dinner. Brought the USB cord so i plug it into my Mom's laptop to let it charge over night. I take it off the charger this morning and turn it on...
First thing that happens is it wants me to set up a google account "touch the android" as if I had wiped data. I hit skip, see that one account is still connected, and all my apps are in the drawer. Most of them F/C when I try to run them. So I decide to restore from CWM. Went back to Tweakstock (Guess I never got around to backing up on eclipse) and then went back to CWM and flashed Eclipse again. Now, some android.acore keeps f/cing, as well as all gapps, google framework junk, the eclipse keyboard if i switch from swype, my contacts, etc. Titanium backup doesn't find root. Superuser seems to be working. So I try flashing eclipse again to no avail.
I noticed after this morning that Verizon data widget wanted to be updated. Looked into that a bit and it seems it MAY be to blame, God knows how...
Anyone experience this before? What should my next steps be. I'm thinking back to stock through odin w/ PIT file and work from there?
Click to expand...
Click to collapse
Sounds like something corrupted in /system area, that's why you back to factory setup screen. To prevent long term issue, I would do the clean slate back to stock with PIT file. Make sure you follow instruction carefully with PIT file.
I couldn't figure anything else out so I went ahead back to stock, and as it's been a while, rooted following a pretty awesome guide at chargeforums.
Still on stock rom but everything seems to be running smooth. From here I will cwm back to eclipse and see how it goes over the next few days. I really have no idea what happened but the last person to touch my phone before it died was my gf so I've had some fun picking on her for breaking my phone. Literally nothing was working earlier so she thought she really messed it up bad.
Tazer2death said:
I couldn't figure anything else out so I went ahead back to stock, and as it's been a while, rooted following a pretty awesome guide at chargeforums.
Still on stock rom but everything seems to be running smooth. From here I will cwm back to eclipse and see how it goes over the next few days. I really have no idea what happened but the last person to touch my phone before it died was my gf so I've had some fun picking on her for breaking my phone. Literally nothing was working earlier so she thought she really messed it up bad.
Click to expand...
Click to collapse
After you fixed your phone, she probably think you're a smart guy and give you more...."love".
Hey guys. I'd really appreciate your help. So this is how the story goes. Im pretty well versed in flashing ROMS. I flashed the CM10 Rom, don't remember the exact name, but it's the one where u can download a bunch of themes. Anyway the wifi kept coming on and off so I decided to try another ROM. I went into recovery mode and flashed the MIUI vs OTTER ROM, I think thats the name, I'm pretty sure . Just as the flashing finishes the phone turns off and BAM!! The problems start so basically phone wont come on now. I don't get the vibration before it starts, so I figured Id root back to stock and start all over...(Odin..PIT etc.) So this is what happens. The computer makes the noise that indicates something's been plugged in and then immediately it makes the same noise as if somethings been unplugged (phone is still plugged in though) Screen is completely blank still and a message comes up (ON PC) to install new software on ( the phone). The software or Device that registers as the phone in device manager is Qualcomm CDMA technologies MSM. Any help would be appreciated. And yes I did the whole wipe factory/dalvik etc. right before flashing the MIUI ROM. The computer says I need to flash drive F to be able to use it (which I figure is the phone, and flashing would erase everything right?) but as I try to do that it denies me permission because th phone is apparently coming in and out, or on and off.
Have you tried a jig? Do a quick Google search "Samsung Galaxy S Blaze 4G Jig" . It'll get you into download mode and allow you to flash through Odin back to stock, I believe.
Sent from my GT-N7100 using xda premium
Playdoe said:
Hey guys. I'd really appreciate your help. So this is how the story goes. Im pretty well versed in flashing ROMS. I flashed the CM10 Rom, don't remember the exact name, but it's the one where u can download a bunch of themes. Anyway the wifi kept coming on and off so I decided to try another ROM. I went into recovery mode and flashed the MIUI vs OTTER ROM, I think thats the name, I'm pretty sure . Just as the flashing finishes the phone turns off and BAM!! The problems start so basically phone wont come on now. I don't get the vibration before it starts, so I figured Id root back to stock and start all over...(Odin..PIT etc.) So this is what happens. The computer makes the noise that indicates something's been plugged in and then immediately it makes the same noise as if somethings been unplugged (phone is still plugged in though) Screen is completely blank still and a message comes up (ON PC) to install new software on ( the phone). The software or Device that registers as the phone in device manager is Qualcomm CDMA technologies MSM. Any help would be appreciated. And yes I did the whole wipe factory/dalvik etc. right before flashing the MIUI ROM. The computer says I need to flash drive F to be able to use it (which I figure is the phone, and flashing would erase everything right?) but as I try to do that it denies me permission because th phone is apparently coming in and out, or on and off.
Click to expand...
Click to collapse
Have you tried pulling the battery and entering recovery again?
Jserrano56 said:
Have you tried a jig? Do a quick Google search "Samsung Galaxy S Blaze 4G Jig" . It'll get you into download mode and allow you to flash through Odin back to stock, I believe.
Sent from my GT-N7100 using xda premium
Click to expand...
Click to collapse
So this "jig" thing...is it something I buy or a program i download? After i googled it I got a few hits selling a small usb looking item and some videos for you tube describing how to make one...so which my friend are u talking about?
anactoraaron said:
Have you tried pulling the battery and entering recovery again?
Click to expand...
Click to collapse
I've tried everything including:
Taking battery out for extended periods.
Trying to hold volume up button and power/vice versa with both and volume down, whilst running odin to see if Added" pops up on odin so that I can root to stock and start over."
Every time i plug the phone into PC you hear the plug and unplu sounds as if the phone is continuesly turning off and on but nothing on the screen. Im not even getting the vibration.
I had a similar issue on my phone recently. It was incredibly frustrating so I just left it on the charger. When I came back 30 minutes later, it was on and charging.
Sent from my SAMSUNG-SGH-T769 using xda premium
Playdoe said:
So this "jig" thing...is it something I buy or a program i download? After i googled it I got a few hits selling a small usb looking item and some videos for you tube describing how to make one...so which my friend are u talking about?
Click to expand...
Click to collapse
Either you can buy one or make it yourself, but I highly recommend you buy one.
Sent from my GT-N7100 using xda premium
Playdoe said:
I've tried everything including:
Taking battery out for extended periods.
Trying to hold volume up button and power/vice versa with both and volume down, whilst running odin to see if Added" pops up on odin so that I can root to stock and start over."
Every time i plug the phone into PC you hear the plug and unplu sounds as if the phone is continuesly turning off and on but nothing on the screen. Im not even getting the vibration.
Click to expand...
Click to collapse
I think it is hard bricked.
Did you try download mode? I thought mine was hard-bricked, but I was able to go into download mode.
Wow, same thing here!
Playdoe said:
Hey guys. I'd really appreciate your help. So this is how the story goes. Im pretty well versed in flashing ROMS. I flashed the CM10 Rom, don't remember the exact name, but it's the one where u can download a bunch of themes. Anyway the wifi kept coming on and off so I decided to try another ROM. I went into recovery mode and flashed the MIUI vs OTTER ROM, I think thats the name, I'm pretty sure . Just as the flashing finishes the phone turns off and BAM!! The problems start so basically phone wont come on now. I don't get the vibration before it starts, so I figured Id root back to stock and start all over...(Odin..PIT etc.) So this is what happens. The computer makes the noise that indicates something's been plugged in and then immediately it makes the same noise as if somethings been unplugged (phone is still plugged in though) Screen is completely blank still and a message comes up (ON PC) to install new software on ( the phone). The software or Device that registers as the phone in device manager is Qualcomm CDMA technologies MSM. Any help would be appreciated. And yes I did the whole wipe factory/dalvik etc. right before flashing the MIUI ROM. The computer says I need to flash drive F to be able to use it (which I figure is the phone, and flashing would erase everything right?) but as I try to do that it denies me permission because th phone is apparently coming in and out, or on and off.
Click to expand...
Click to collapse
I have almost the EXACT same problem. BUT, I do have a jig that I know that works...and it doesn't bring me to Download Mode. :crying:
No button combos work...download or recovery, I don't even know if it is charging...had it on the charger for about 30 mins so far.
(It says exactly:
You need to format the disk in drive G: before you can use it.
Do you want to format it?
<Format disk> <Cancel>
I of course press cancel
With a battery or without a battery, when I connect to the computer it installs the drivers as stated above but it continues to ask if I want to format it. If I leave it plugged up, the popup continues almost endlessly. I've not yet press FORMAT, as I would think that could make it worse than it is.
Has anyone seen this type of problem?
*EDIT: I'm sending it out on Monday to get it JTAGed, too expense and complex to even think about trying to get a box and attempting the fix myself.
I was basically told that the Boot portion (whatever it's exactly called) needs to be re-written and then probably just flash stock firmware on it.
Just wanted to leave this here to help others search and find this info...just in case they attempt to try to do more than they should and really mess their phone up even more.
Okay, So ive been banging my head against the wall for 2 days straight now with this problem so ive finally come to post about it to see if anybody has ANY idea how i can fix this. I have searched high and low for anyone who has come across this problem and i cant find another poor soul stuck in this predicament.
I have the D850, and have had it since last July. It was Bumped the day that it came out and ive been happily running roms on it since. I have honestly probably tried every ROM that was ever released for this phone, never had any issues.
I had flashed back to stock maybe a few weeks ago bc i had never done so, and after flashing a million roms i figured id try out straight stock for the first time in a year. SO i flashed the kitkat stock rom, and booted up everything was fine, then there was maybe 2 updates that i did OTA. I knew lollipop was out so i updated to that and all was well. I eventually got weary of straight stock quickly so i rooted and installed some of the fun stuff. Now this is where i noticed something i hadn't had before- when i would boot into TWRP i would get an unsecured boot error: error 1300- or at least i think that's what it said...Everything would flash fine and boot up so i didn't think much of it, but now that im having the issues im having, i think this is where it stems from.
Fast forward to 2 days ago- i figured i would flash back to 100% stock because i will be receiving my 6P next week and was going to donate this phone to my aunt bc i have taken such good care of it i figured id hand it down to a needy relative instead of get $20 bucks for it on ebay- All goes well i get the Blue screen with the 3 on it, pull battery and reboot. Everything seems normal..att logo...welcome screen..i go to touch the screen and its frozen. then reboots. weird. it does this a few more times, sometimes staying alive for up to 3 mins before freezing and rebooting again. Sometimes it even screams at me- no joke- it will freeze and make a high pitch screeching noise then shut down. scared the Sh*t out of me the first time it did it.
Ive tried everything people...i have downloaded fresh tot files/tried 5 different computers/fresh installs of flashtool/LG PC suit/hard reset/ran in safe mode/changed flash settings form upgrade to Board- to no avail. I honestly don't know how the phone hasn't died yet bc i think ive flashed the thing 30 times in the last 2 days from various computers. Remember- every time i flash in flash tool it passes, its only when it boots back up that it freezes/screams/reboots.
Sorry for the long winded post, but i wanted to give you some context. I'm going to try and mess around with it some more today but i keep getting closer and closer to throwing it off the wall bc this is frustrating. I think my problems would be solved if there was a lollipop tot file to flash, but i looked around and couldn't find anything. Thanks for reading everyone, any ideas are welcome. I'm out of warranty so ill try ANYTHING to fix this. At this point even if i FUBAR it i don't gaf bc its broken right now anyways. Any ideas are welcome. Thanks guys and i hope this never happens to you
Wickidmasshole said:
Okay, So ive been banging my head against the wall for 2 days straight now with this problem so ive finally come to post about it to see if anybody has ANY idea how i can fix this. I have searched high and low for anyone who has come across this problem and i cant find another poor soul stuck in this predicament.
I have the D850, and have had it since last July. It was Bumped the day that it came out and ive been happily running roms on it since. I have honestly probably tried every ROM that was ever released for this phone, never had any issues.
I had flashed back to stock maybe a few weeks ago bc i had never done so, and after flashing a million roms i figured id try out straight stock for the first time in a year. SO i flashed the kitkat stock rom, and booted up everything was fine, then there was maybe 2 updates that i did OTA. I knew lollipop was out so i updated to that and all was well. I eventually got weary of straight stock quickly so i rooted and installed some of the fun stuff. Now this is where i noticed something i hadn't had before- when i would boot into TWRP i would get an unsecured boot error: error 1300- or at least i think that's what it said...Everything would flash fine and boot up so i didn't think much of it, but now that im having the issues im having, i think this is where it stems from.
Fast forward to 2 days ago- i figured i would flash back to 100% stock because i will be receiving my 6P next week and was going to donate this phone to my aunt bc i have taken such good care of it i figured id hand it down to a needy relative instead of get $20 bucks for it on ebay- All goes well i get the Blue screen with the 3 on it, pull battery and reboot. Everything seems normal..att logo...welcome screen..i go to touch the screen and its frozen. then reboots. weird. it does this a few more times, sometimes staying alive for up to 3 mins before freezing and rebooting again. Sometimes it even screams at me- no joke- it will freeze and make a high pitch screeching noise then shut down. scared the Sh*t out of me the first time it did it.
Ive tried everything people...i have downloaded fresh tot files/tried 5 different computers/fresh installs of flashtool/LG PC suit/hard reset/ran in safe mode/changed flash settings form upgrade to Board- to no avail. I honestly don't know how the phone hasn't died yet bc i think ive flashed the thing 30 times in the last 2 days from various computers. Remember- every time i flash in flash tool it passes, its only when it boots back up that it freezes/screams/reboots.
Sorry for the long winded post, but i wanted to give you some context. I'm going to try and mess around with it some more today but i keep getting closer and closer to throwing it off the wall bc this is frustrating. I think my problems would be solved if there was a lollipop tot file to flash, but i looked around and couldn't find anything. Thanks for reading everyone, any ideas are welcome. I'm out of warranty so ill try ANYTHING to fix this. At this point even if i FUBAR it i don't gaf bc its broken right now anyways. Any ideas are welcome. Thanks guys and i hope this never happens to you
Click to expand...
Click to collapse
If it's making noise and freezing after flashing, that sounds like an hardware issue. Since you've already tried reflashing it several times and it still does it nothing else can really be done. You can try selecting board_id in flash tool at the tot selection screen and try that.
Also I always gotten secure boot error when booting into twrp on my LG phones I've rooted and loaded twrp on them.
Sent from my iPhone using Tapatalk
hyelton said:
If it's making noise and freezing after flashing, that sounds like an hardware issue. Since you've already tried reflashing it several times and it still does it nothing else can really be done. You can try selecting board_id in flash tool at the tot selection screen and try that.
Also I always gotten secure boot error when booting into twrp on my LG phones I've rooted and loaded twrp on them.
Sent from my iPhone using Tapatalk
Click to expand...
Click to collapse
Yea man i tried that and it it boots into a screen that says DO NOT TOUCH SCREEN and then just continues to boot to that and i get a fail on the flash tool . thanks for your tutorial btw, thats what i used for all this troubleshooting. i found a thread about actually taking the phone apart and shorting it out and then trying to flash. i am going to give that a try if i cant get this f0cker to boot up correctly.
wait- did you mean select board DL?
Wickidmasshole said:
Yea man i tried that and it it boots into a screen that says DO NOT TOUCH SCREEN and then just continues to boot to that and i get a fail on the flash tool . thanks for your tutorial btw, thats what i used for all this troubleshooting. i found a thread about actually taking the phone apart and shorting it out and then trying to flash. i am going to give that a try if i cant get this f0cker to boot up correctly.
Click to expand...
Click to collapse
When it continues to boot what happens? Flash tool is supposed to fail.. Once the phone is out of download mode flash tool will fail as its done and has no connection. Once flash tool hits 80/85% its done. Never heard of the LG phone and taking it apart to short it out. That would be something if you had a brick and the phone doesnt go into download mode.
hyelton said:
When it continues to boot what happens? Flash tool is supposed to fail.. Once the phone is out of download mode flash tool will fail as its done and has no connection. Once flash tool hits 80/85% its done. Never heard of the LG phone and taking it apart to short it out. That would be something if you had a brick and the phone doesnt go into download mode.
Click to expand...
Click to collapse
so it faild out at 89%, then the miniOS screen comes up, but then it just keeps boot looping into the AAT-mini OS 3.1 screen where it says AUTO TOUCH TEST dont touch screen!!
Wickidmasshole said:
so it faild out at 89%, then the miniOS screen comes up, but then it just keeps boot looping into the AAT-mini OS 3.1 screen where it says AUTO TOUCH TEST dont touch screen!!
Click to expand...
Click to collapse
Strange. But yeah once phone reboots it's done. Flash tool percent means nothing. But very strange.
Sent from my iPhone using Tapatalk
hyelton said:
Strange. But yeah once phone reboots it's done. Flash tool percent means nothing. But very strange.
Sent from my iPhone using Tapatalk
Click to expand...
Click to collapse
oh well it was a great phone while it lasted. Thanks for the input.