Database Info

[Kernel] FluffKernel Epic 4G version 1.0.5 Rom Manager Compatiable

Here the the first offical release of Fluff Kernel for the Epic 4G
Ok here are two new versions for you all.One is the performance kernel and the other is the battery saver.Both are using the new version of my initramfs that comes with ChainsDD's Superuser.apk and su binary.So i suggest if you have Superuser.apk installed to uninstall it before flashing either of these kernels since Superuser.apk will be installed in /system/app instead of /data/app.And now for the kernels.Both of these kernels are Rom Manager compatiable and have root in them.
This is the battery saving kernel.Changes to it are:
Both Kernels are updated to DI18 sourcecode.
CPU governor set to userspace you can use SetCPU to set the speed of the kernel if you like although SetCPU seems a bit unstable on anything other then conservative.
Default scheduler set to CFQ
http://www.sdx-downloads.com/devs/skeeterslint/FluffKernel-Epic-V1.0.5B.zip
This is the performance kernel.Changes to it are:
CPU governor set to performance your cpu will always be set to max this gives the best numbers in linpack and quadrant if numbers are you thing.
Default scheduler is set to CFQ.
http://www.sdx-downloads.com/devs/skeeterslint/FluffKernel-Epic-V1.0.5P.zip
This is another battery saver kernel for those who don't want to mess with SetCPU is uses the conservative CPU governor that the overclocked kernels use.
http://www.sdx-downloads.com/devs/skeeterslint/FluffKernel-Epic-V1.0.5C.zip
All kernels have been compiled against a toolchain that is stable on the newest OTA.And all kernels have been built with stock Samsung kernel source with no modifications to the source code all changes were to the .config file.
​
This zip can be flashed with ClockWorkMod or can be taken out of the zip and the zImage can put used as a replacement for the zImage in the one click root method although this kernel has root built into it.I recommend removing the JoeyKrim root method to not cuase and conflicts.
This kernel still has some Samsung bloat in it this will be stripped out as time goes on.I will also be trying out different combinations of CPU governors and schedulers to see which one performs the best.So please test it out and post your feedback.
Link to the stock samsung source that was used for these kernels.
http://opensource.samsung.com/ Please search for SPH-D700 DI18.

Sent from my SPH-D700 using Tapatalk

Sorry for the double post but does this kernel have overclocking??
Sent from my SPH-D700 using Tapatalk

mrkrabs said:
Sorry for the double post but does this kernel have overclocking??
Sent from my SPH-D700 using Tapatalk
Click to expand...
Click to collapse
No it doesn't.

Is this the new kernel from the ota
Sent from my SPH-D700 using Tapatalk

dondadah88 said:
Is this the new kernel from the ota
Sent from my SPH-D700 using Tapatalk
Click to expand...
Click to collapse
Was just about to ask..
No overclock. Will this conflict with custom roms?

rjmjr69 said:
Was just about to ask..
No overclock. Will this conflict with custom roms?
Click to expand...
Click to collapse
This is not the kernel from the ota this is a custom compiled kernel it should run fine on any roms that are out right now.I am running it myself with no issues at all to speak of.

skeeterslint said:
This is not the kernel from the ota this is a custom compiled kernel it should run fine on any roms that are out right now.I am running it myself with no issues at all to speak of.
Click to expand...
Click to collapse
Thank you. And your right its running just fine right now. I am using it with noobnl latest rom. And I had it running fine on the BOSS rom

Hi
Does this kernel support loop-back. Im trying to install ubuntu on samsung epic.

darknoobie said:
Does this kernel support loop-back. Im trying to install ubuntu on samsung epic.
Click to expand...
Click to collapse
All the b usybox applets to setup the the loop device should be there. But I have never tried to use them I will have to check the kernel config to see if the kernel is setup for it.
Sent from my SPH-D700 using Tapatalk

Skeeter this its the best kernel I have used on my phone to date, however one thing to note is that the version of busy box used in this kernel is not compatible with ti backup so the busy box that comes with ti back up needs to be used.
Sent from my SPH-D700 using Tapatalk

mark920 said:
Skeeter this its the best kernel I have used on my phone to date, however one thing to note is that the version of busy box used in this kernel is not compatible with ti backup so the busy box that comes with ti back up needs to be used.
Sent from my SPH-D700 using Tapatalk
Click to expand...
Click to collapse
Really it works fine for me same version of busybox that i use in all my kernels.Try reloading Ti when its running and see what happens.

skeeterslint said:
Really it works fine for me same version of busybox that i use in all my kernels.Try reloading Ti when its running and see what happens.
Click to expand...
Click to collapse
I actually tried installing an updated version of BusyBox from the market and it finds TWO different installs??? And both are old versions lol

Updated OP.
I added a link to a fully compatiable Rom Manager kernel.Try it out its just as fast as vaersion 1.0.1-2.Enjoy everyone.And I want to thank Koush for the recovery.

skeeterslint said:
Updated OP.
I added a link to a fully compatiable Rom Manager kernel.Try it out its just as fast as vaersion 1.0.1-2.Enjoy everyone.And I want to thank Koush for the recovery.
Click to expand...
Click to collapse
I have this running and recovery works fine as well as the kernel. Rom manager is nice to have so my thanx goes to skeeter and koush. Its late so I will report any issues I have tomorrow if any arise.

OK I apologize for this but it was very early in the morning when I put this up but I fubar'd my root scripts in the RM kernel it is fixed now please redownload and apply the new zip.
Thanks

skeeterslint said:
OK I apologize for this but it was very early in the morning when I put this up but I fubar'd my root scripts in the RM kernel it is fixed now please redownload and apply the new zip.
Thanks
Click to expand...
Click to collapse
That explains a lot lol. My battery has been draining like mad all day and I noticed that JuiceDefender was having all kinds of errors. Re-downloading and applying now....

odub303 said:
That explains a lot lol. My battery has been draining like mad all day and I noticed that JuiceDefender was having all kinds of errors. Re-downloading and applying now....
Click to expand...
Click to collapse
OK it was still broken but i promise its fixed now.The battery drain probably wasn't cuased by the kernel some people have had problems with android system running away and draining battery but it has nothing to do with the kernel they have flashed back to the stock kernel and still have had issues with battery drain and android system running away on them.

skeeterslint said:
OK it was still broken but i promise its fixed now.The battery drain probably wasn't cuased by the kernel some people have had problems with android system running away and draining battery but it has nothing to do with the kernel they have flashed back to the stock kernel and still have had issues with battery drain and android system running away on them.
Click to expand...
Click to collapse
I wasn't implying that the drain was caused by the kernel, I was saying that my battery was draining because JuiceDefender wasn't able to disable the APN because my root access was broken. D/l-ing update now. Thanks again!

Can i use this kernel with noobnl's Andromeda Galaxy v1.0.3 ROM?

[MOD][11/9] Underclock / Battery Tweak

UPDATE: This was causing too many lockups, moving to a minimal setup that just sets the CPU clock.
This will work with ANY kernel without perflock (nearly any kernel other than stock).
Old tweak removed, new one uploaded.
This is developed primarily for myself, please take this into consideration.
This just sets the CPU to a max of 806MHz and lowers the max clock as the battery drains, it's the collin_ph mod stripped to almost nothing.
Most of the credit goes to:
Collin_ph
Myn
jhoffy22

anyone try this yet??? flash in recovery???? or install in file explorer

lucidvtec said:
anyone try this yet??? flash in recovery???? or install in file explorer
Click to expand...
Click to collapse
Flash in recovery.
This works great for me, I hope you like it.

Do you need to install Myn's collin_ph before this?

I was thinking of trying one of these battery life fixes but Im trying to figure out what the purpose of the userinit script they all have is for? It looks to be a pretty blatant security hole running a script off the SD card but it's likely that I'm missing something.

Regarding kernals this works on, are these with or without havs or does this not matter with your mod?

asj2583 said:
Regarding kernals this works on, are these with or without havs or does this not matter with your mod?
Click to expand...
Click to collapse
It should work with all, looking at the code.

If you have colins mod flashed, do you have to disable before flashing this?

oxxomxxo said:
If you have colins mod flashed, do you have to disable before flashing this?
Click to expand...
Click to collapse
Nope, it will just overwrite it.

Thinking about giving this a try when I get home, but I'm running Toast's .35 on CM 6.1 Nightly #152. I know you said that it will work on Myn's ROM with King and Ziggy's kernels, but has anyone tested it on CM 6.1 or Toast's .35?

yes you need a no HAVS kernel

xavier1022 said:
yes you need a no HAVS kernel
Click to expand...
Click to collapse
How did you come to this conclusion? The OP says this tweak is for King's#11 and Ziggy's kernel, both of which implement HAVS....[KERNEL] [2.6.32.24] [HAVS] [BFS] [BFQ] KiNgxKernel #11/#11 "Con is an Artist"
edit...after being directed to Kings site I realized I should probably doing more reading before posting...

tonwarr.the.incredible said:
How did you come to this conclusion? The OP says this tweak is for King's#11 and Ziggy's kernel, both of which implement HAVS....[KERNEL] [2.6.32.24] [HAVS] [BFS] [BFQ] KiNgxKernel #11/#11 "Con is an Artist"
Click to expand...
Click to collapse
If you read on Kings website the changelog for BFS 11, the first line reads HAVS is out, and he went back to SVS. It will work with Kings BFS 11

Here's a question for the OP. It's been stated that JuiceDefender-like apps compliment the Colin_ph battery tweak, would the same hold true with yours or do you think there would be conflict between the tweak and said app? Thanks in advance for any help you can offer...

NinjaPenguin said:
If you read on Kings website the changelog for BFS 11, the first line reads HAVS is out, and he went back to SVS. It will work with Kings BFS 11
Click to expand...
Click to collapse
Lol...touche, I guess I'm gonna go back and do some more reading. Thanks.

tonwarr.the.incredible said:
Here's a question for the OP. It's been stated that JuiceDefender-like apps compliment the Colin_ph battery tweak, would the same hold true with yours or do you think there would be conflict between the tweak and said app? Thanks in advance for any help you can offer...
Click to expand...
Click to collapse
Yes, all holds true.
My tweak is still the Collin_ph mod at core, just my own touches to it along with some code stripped out to minimize CPU usage.

Neotelos_com said:
Yes, all holds true.
My tweak is still the Collin_ph mod at core, just my own touches to it along with some code stripped out to minimize CPU usage.
Click to expand...
Click to collapse
Thank you very much for your timely response.

I tried flashing and it gave me this,
E:Can't chow/mod /system/bin/batt-rm.sh (no such file or directory) E:Failure at line 9
Installation aborted.
I'm on VirusRom Anthrax 2.2 3.30 build with ziggy's kernel. Any suggestions?

Unpossible said:
I tried flashing and it gave me this,
E:Can't chow/mod /system/bin/batt-rm.sh (no such file or directory) E:Failure at line 9
Installation aborted.
I'm on VirusRom Anthrax 2.2 3.30 build with ziggy's kernel. Any suggestions?
Click to expand...
Click to collapse
It should still have installed, seems I left some residual commands in the install script.
Because every command before that error should have run, it should still be installed.
So...until I post my new changes, just ignore the error, lol

What rom and kernel are you using with this tweak neotelos?

i9020a overclocking

Has anyone been successfull? i have tried every OC kernel and as soon as i overclock it just reboots my phone to a freeze (only way out is to either pull the battery or adb reboot). That being said the UV kernel runs fine.

Not sure if it has to do with the I9020A series.
But overall, each NS phone can tolerate its own OC levels. Some phones can tolerate only up to 1.2 GHz, some may be able to achieve 1.4GHz (or beyond). And for some of the unfortunate, some aren't able to OC at all.

Thus this post. I hope my phone is'nt the issue. it would be nice to push a little bit more out of it if i needed it down the line.

I over clocked mine to 1.4 and it was fine, I leave it at 1.0 tho, this friggin thing is quick enough for now.

hmm how do you check your radio. I'm gonna try that as a last resort. And i can set mine as 1.4 but as soon as i run a resource heavy task (n64) my phone locks up and reboot freezes.

themapleboy said:
hmm how do you check your radio. I'm gonna try that as a last resort. And i can set mine as 1.4 but as soon as i run a resource heavy task (n64) my phone locks up and reboot freezes.
Click to expand...
Click to collapse
Not sure why a radio would affect your ability to OC but...
Menu -> Settings -> About Phone -> Baseband Version
the last 3 are what you want to look at "JK8/KB1/KB3"
List all the kernels you've tried. The best in my opinion is Netarchy's 1.3.0.3-CFS kernel using SetCPU
Try intervals of 1.2 GHz too. My phone can only go up to 1.2 GHz

Yeah actually i had tried all of the bfs kernels. I just succeeded in getting Netarchy's 1.3.0.3-CFS kernel. And i can run up to 1.4 . Maybe the brain fk scheduler does not play nice with 9020a's

themapleboy said:
Yeah actually i had tried all of the bfs kernels. I just succeeded in getting Netarchy's 1.3.0.3-CFS kernel. And i can run up to 1.4 . Maybe the brain fk scheduler does not play nice with 9020a's
Click to expand...
Click to collapse
awesome. I just prefer CFS because with BFS the boot animation doesn't show, and it bothers me.

zephiK said:
awesome. I just prefer CFS because with BFS the boot animation doesn't show, and it bothers me.
Click to expand...
Click to collapse
i flashed the BFS first, and lost my boot animation. Then i switched to the CFS, and the boot animation still didnt appear.
Any ideas as to how i can get it back?
Also, is there anyway to recover the stock kernel? I'd like to have it handy to be able to go back to it.
thnks

mixxy said:
i flashed the BFS first, and lost my boot animation. Then i switched to the CFS, and the boot animation still didnt appear.
Any ideas as to how i can get it back?
Also, is there anyway to recover the stock kernel? I'd like to have it handy to be able to go back to it.
thnks
Click to expand...
Click to collapse
Wipe dalvik and cache. Flash a rom that flashes stock. Like cm7 but netarchys is so much better than stock
You can also get ogdobbers which is stock + ext4 + voodoo.
Sent from my Nexus S using XDA Premium App

Hey everyone,
This is an off topic question but does anyone know what happened to the 1.6 OC support for Netarchy? I loved to see the absurdly high quadrant scores and instantaneous screen transitions.
Thanks,
Justin

JTECJ said:
Hey everyone,
This is an off topic question but does anyone know what happened to the 1.6 OC support for Netarchy? I loved to see the absurdly high quadrant scores and instantaneous screen transitions.
Thanks,
Justin
Click to expand...
Click to collapse
you're better off asking that in the netarchy kernel thread in dev forums.
netarchy could answer that... not a lot of phones can tolerate 1.6 GHz Oc

Thanks, yeah i felt a little bad posting the question here. Though ive been an avid user for a long time i have never posted so i didnt have sufficient rites to post in the decelopment section yet : (
Justin
Sent from my Nexus S using XDA Premium App

zephiK said:
Wipe dalvik and cache. Flash a rom that flashes stock. Like cm7 but netarchys is so much better than stock
You can also get ogdobbers which is stock + ext4 + voodoo.
Sent from my Nexus S using XDA Premium App
Click to expand...
Click to collapse
so cm7 flashes the stock kernel?

mixxy said:
so cm7 flashes the stock kernel?
Click to expand...
Click to collapse
yep! low on bugs and freezes but no voodoo or bln.. dammit

[Kernel]Defuse Kernel v1.4 - Voodoo Sound/Lagfix (Updated 06-20-2011)

Hi everyone, this kernel aims to be fast and stable and have good battery life. It should be what the infuse comes with.
Latest features:
- Compiled using codesourcery 2009 (will be updated to 2010 which brings optimizations and speed)
This kernel has/is:
- Works on all voodoo enabled roms
- Currently not included neldar's BackLightNotification 2.3
- Includes supercurio's Voodoo Sound v9
- Includes jhash3 function for performance and reliability
- Adjusted kernel HZ value to improve smoothness
- Properly working TinyRCU for better speed and efficiency
- Patched lowmemorykiller for compatibility with TinyRCU
- Modified Initramfs for performance
- BFQ is the default i/o scheduler (other i/o schedulers will be tested as time goes by)
If your keeping up with h8rift's rom Refuse(1.4 and up) then your using my kernel
Everyone else, the zip is for flashing via cwm and the tar is to flash via odin.
Note: I do own a infuse as of 06/17 but if you'd like to donate because of
my work, feel free to do so and thanks
SOURCE is UPDATED:
https://github.com/razor950/Defuse-Kernel
Changelog
V1.0
- Implemented tinyrcu and lowmemkiller
- Implemented neldar's BackLightNotification 2.3
- Kernel HZ is at 500
V1.1
- fixed video memory bug (this fixed ffc / video decoding)
V1.2
- implemented supercurio's voodoo sound
- added jhash3 function for speed and better reliability
v1.3
- fixed BLN issues, it can be turned off now within the bln controls
v1.4
- added ext4 patchset (LinuxBozo)
- implemented BFQ I/O scheduler and set it as default (LinuxBozo)
- minor compiler flags for optimization (still need to add to this)
- modified initramfs tweaked for performance (LinuxBozo)
- BLN is off for now due to it being too random with bugs (no eta when it'll be back)

Nice. This is beginning to look like a Sammy forum.
*edit: Feel free to take this post if you want.

Omg omg omg omfg omfg flashing now!
Sent from my SAMSUNG-SGH-I997 using XDA Premium App

Very nice work razor!!!
Sent from my SAMSUNG-SGH-I997 using XDA App

Hellz yes razor
Sent from my SAMSUNG-SGH-I997 using XDA Premium App

Flash this over infused? With red cwm? Sound correct

tyshemi said:
Flash this over infused? With red cwm? Sound correct
Click to expand...
Click to collapse
Yes
Sent from my SAMSUNG-SGH-I997 using XDA App

Hey hoofadoo is that what you are running or what? Or are you refuse?

tyshemi said:
Hey hoofadoo is that what you are running or what? Or are you refuse?
Click to expand...
Click to collapse
Im running bionix with this kernel
Sent from my SAMSUNG-SGH-I997 using XDA App

Do I need to do anything I'm on infused (newest)
So download this zip flash with red cwm that's it?

razor950 said:
Note: I do not have a infuse4g and I probably won't be getting one, I am a
T-mobile user but I will work on CM7 if I grab some donations
If you'd like to donate, just hit the donate to me button on the side.
Click to expand...
Click to collapse
Do you need enough donations to buy an Infuse before you start working on CM7, or are you gonna use some witchcraft to port it over without even having one if people donate some money to you?
If you need an Infuse and everyone starts to donate, I'd jump in to and donate some money. Or if you're able to do it with just donations and no phone, I may donate as well.

I do not ask for money to keep development going....
Donations would go straight to buying a infuse but I might be willing to just go out giving a certain amount of donations and I am not sure because I've never really asked to donate...
just to double check, is BLN working?

tyshemi said:
Do I need to do anything I'm on infused (newest)
So download this zip flash with red cwm that's it?
Click to expand...
Click to collapse
Yep. Just flash with red CWM.

How do I know if I got it done my kernel build doesn't say refuse?

razor950 said:
I do not ask for money to keep development going....
Donations would go straight to buying a infuse but I might be willing to just go out giving a certain amount of donations and I am not sure because I've never really asked to donate...
just to double check, is BLN working?
Click to expand...
Click to collapse
Not for me.

tyshemi said:
Do I need to do anything I'm on infused (newest)
So download this zip flash with red cwm that's it?
Click to expand...
Click to collapse
Tyshemi can you give feedback after you flash, and what difference died it makes? Ty
Sent from my SAMSUNG-SGH-I997 using XDA Premium App

I am going to bed, i know h8rift tested it today and bln was working, I'll double check tomorrow...
it won't be a completely noticeable difference yet until more changes but BLN is nice (I'll check why its not working)
Only thing I can suggest is try latest refuse 1.4 rom and let me know if BLN works then.

Can't tell if I got it but benchmark is stuck at video decoding and won't move? Can someone tell me how to see if it flashed ok?

razor950 said:
I do not ask for money to keep development going....
Donations would go straight to buying a infuse but I might be willing to just go out giving a certain amount of donations and I am not sure because I've never really asked to donate...
just to double check, is BLN working?
Click to expand...
Click to collapse
Ah alright.
And it looks like BLN is working for me! I just installed BLN and got a text, and the backlights lit up! Thanks a lot! You are the man!

tyshemi said:
Can't tell if I got it but benchmark is stuck at video decoding and won't move? Can someone tell me how to see if it flashed ok?
Click to expand...
Click to collapse
I also got stuck at Video Decoding in the benchmark. Outside of that everything seems to be working fine so far.
Edit: Nevermind, it looks like the front facing camera is broken again. I was on the newest Infused rom and it worked there, but after flashing this kernel it doesn't work anymore. My phone froze after I tried taking a picture.

##UDATED 10MAR12## [TWEAK] Lightning Zap

READ ENTIRE OP!!!!!!!!!!!!!!!!!!!!
I took ASXIX, ASv15, added parts from Thunderbolt and a few tweaks from a Cappy ROM (Fasty III), edited a few things here and there, combined them together and flashed them. I got INSANE battery life, super fast performance, shorter boot times, smooth transitions, faster sdcard read/write speed, and higher quad scores (I know most people say those don't matter, but it does account for something).
DO NOT USE THIS WITH RAVERX3X'S OCTANE 3.0
ONLY USE v5 Upgrade if you are currently using any other version of Lightning Zap
Made 3 version
v5 for all ROMs
v5 Upgrade if you are currently on an older version of Lightning Zap
v5 MIUI is for MIUI ONLY
v5
Now adjusts filesystem with tune2fs (still ext4fs) to disable journaling, improve responsiveness, smoothness, and overall performance
Contains newest build.prop tweaks from dsexton702
Now uses Aroma installer by FBis251
Removed duplicate scripts
Added newest FUGU (Actually did that on v3, but failed to mention it)
Reformatted governor tweak a bit (easier to follow instructions to change values)
Decided NOT to add the journaling script and data2ext... for now
Quads hit 2432 on first run and averaged 2696 out of 3 runs, Not OC'd
v5 takes quite a while to install (about 20 to 30 minutes...maybe longer). If you experience FC's, fix permissions and reboot. As we all know, or should know, backups don't always like to play right when restored.
On v5 quads are hitting 3100+ average...
Must be rooted, on Gingerbread build that supports init.d, and have a kernel with voodoo. this has been tested on SG4G and Captivate but it may work on other devices (if you have flashing issues push manually or PM me for help)
DISCLAIMER
I am not responsible for any damage this may cause to your device.
Don't forget to make a backup! Just in case...
INSTRUCTIONS
Download zip and place on sdcard, reboot to recovery, install zip, follow prompts in Aroma installer (No options to change in custom install so use Quick Install), reboot phone, let sit for at least 10 minutes, REBOOT, enjoy!
This can be flashed directly over older versions of Lightning Zap.
Want to get more out of Lightning Zap?
Refer here:
More Tweaking
If you are not getting the battery life/performance others are getting, refer here:
Gremlin Remover
To see what tune2fs does (and verify journaling is disabled) type:
Code:
tune2fs -l /dev/block/stl9
tune2fs -l /dev/block/stl10
tune2fs -l /dev/block/stl11
For an example of results refer to this post:
tune2fs results on /system partition
Special Thanks to
GreyDark
dsexton702
LOSTLOGIC89
pikachu01
tehgyb
FBis251 for the awesome installer
And all the super awesome DEVs that help us!
Download links just below here

Nice...... Will have to take a look at this

Will check it out... Is the attached Quad Score Stock or OC'd ??

Racing19969 said:
Will check it out... Is the attached Quad Score Stock or OC'd ??
Click to expand...
Click to collapse
OC'd. The original score was 1301. Mind you, for battery life purposes, the tweak I added LIGHTLY overclocks the phone. If you want to increase the oc, use tegrak overclock (preferably paid so changes will stay after boot). I just tried the free version, and it shot my quad score to 2604.

Well, the tweaks definately work... I ran stock on aosp kj1 kernel and scored 1718.
Then installed and ran again, scored 1943 stock. Then Installed new kj6 kernel and ran again and scored 2149 stock no oc. Rebooted phone a couple of times and played around with some programs to let sink in. Now I ran quadrant again stock and got my highest score yet for a stock rom 2408.. added image

Should we delete the init.d scripts that are on the phone before flashing?
Sent from my SGH-T959V using xda premium

steeleain said:
Should we delete the init.d scripts that are on the phone before flashing?
Sent from my SGH-T959V using xda premium
Click to expand...
Click to collapse
No, thanks to dsexton's script, we don't have to do that... Just flash and enjoy.

Working really well
Sent from my SGH-T959V using XDA App

Hi Thomas
I'm currently testing it.
Are you sure there are no duplications? I see 2 SDCard speedfixes in init.d...
Sent from me

itzik2sh said:
Hi Thomas
I'm currently testing it.
Are you sure there are no duplications? I see 2 SDCard speedfixes in init.d...
Sent from me
Click to expand...
Click to collapse
The S77-sdcard-speedfix raises the read ahead from 3072 to 4096. I tried running it without it (just raised the threshold in 02speedcardfix) and the performance was good (17.28 mb/s), but I got much higher readings (22.13 mb/s) when I changed the 02sdcardspeedfix back to 3072 and added the S77-sdcard-speedfix back into it. (These numbers are referenced from DeviceMark app).

Thanks
this is super fast thanks what a brilliant mind for tweaking this everything is 10x faster

bd1692 said:
this is super fast thanks what a brilliant mind for tweaking this everything is 10x faster
Click to expand...
Click to collapse
You are welcome and thank you. But keep in mind, I got these tweaks from dsexton702 and LOSTLOGIC89, made a few minor adjustments, and just combined them together. But the really great thing about it, the more you play with your phone and the more they soak in, the better things get.

I've modified as myself with different tweaks and noticed the ones I, modified happen to be the ones you didn't and I get the same quad either way... I'm thinking if I add mine to yours there may be a little boost. I'll have to try it out tonight. it pertains to system_server, app_process and the sqlite libraries
Sent from my SGH-T959V

tehgyb said:
I've modified as myself with different tweaks and noticed the ones I, modified happen to be the ones you didn't and I get the same quad either way... I'm thinking if I add mine to yours there may be a little boost. I'll have to try it out tonight. it pertains to system_server, app_process and the sqlite libraries
Sent from my SGH-T959V
Click to expand...
Click to collapse
Awesome. Let me know how it works out, and if you want, we can add your tweaks as well.

thomas.raines said:
Awesome. Let me know how it works out, and if you want, we can add your tweaks as well.
Click to expand...
Click to collapse
Word, will do bud
Sent from my SGH-T959V

Do you think this will work with the SGS2?

kaizasoshi said:
Do you think this will work with the SGS2?
Click to expand...
Click to collapse
I would say yes as most of these tweaks have been used on many other devices and incorporated into various ROMs. But don't hold me to it. All I can say is make a backup, flash, and see. Report back to me with your findings please?

Ravers 3.0 version says removed ind.t, can i still flash this or could that cause complications?

thomas.raines said:
I would say yes as most of these tweaks have been used on many other devices and incorporated into various ROMs. But don't hold me to it. All I can say is make a backup, flash, and see. Report back to me with your findings please?
Click to expand...
Click to collapse
Got the " installation aborted " error message, will push it manually through Root Explorer. Will report back later today to let you know what the results are

mikhail777 said:
Ravers 3.0 version says removed ind.t, can i still flash this or could that cause complications?
Click to expand...
Click to collapse
IDK, I haven't tried yet. I am about to start working on that and try to add lockscreens. I will also try flashing this and we will see...