It seems as though a lot of people have had this problem for other phones but I haven't been able to find a solution to it (forgive me if its somewhere very obvious ).
After editing my framework-res.apk I am trying to push it back into my milestone through the SDK so I have tried to get my phone to show up while in recovery mode so I can push it back on.
The problem is that while in recovery my phone won't appear under "adb devices" I have tried using GOT's recovery and also the regular Openrecovery v1.37
Thanks
bump. i also need this. btw have you tried using a script to do it?
danboard said:
It seems as though a lot of people have had this problem for other phones but I haven't been able to find a solution to it (forgive me if its somewhere very obvious ).
After editing my framework-res.apk I am trying to push it back into my milestone through the SDK so I have tried to get my phone to show up while in recovery mode so I can push it back on.
The problem is that while in recovery my phone won't appear under "adb devices" I have tried using GOT's recovery and also the regular Openrecovery v1.37
Thanks
Click to expand...
Click to collapse
Did you read this thread?
http://forum.xda-developers.com/showthread.php?t=698059
and especially did you install this driver?
http://www.motorola.com/consumers/v/index.jsp?vgnextoid=bda09ec8009a0210VgnVCM1000008806b00aRCRD
I do have read the thread and I have installed that driver. While in recovery mode using GOT's or OpenRecovery I notice that under device manager it says my phone is listed as "Android Phone" and if my phone is on and I connect it to my computer with USB debugging it lists it as "ADB interface". I can't get the phone to appear under adb devices while in recovery mode.
USB-Debugging active? (Settings-->Development)
It is when the phone is on, but what I am trying to do is push a file to the phone while its "off" in recovery mode so the usb debugging is irrelevant or so i believe.
Yes, sorry, you are right.
As I can remember, I have had a similar problem a year ago...
Try to copy adb into another directory and use it from there. Sounds stupid, but helped me in the past.
Sent from my Milestone using XDA App
I just tried changing my directory for the sdk but doesn't seem to help. Just to make sure is there anything i need to do once inside the OpenRecovery? After loading up the update.zip i connect it to my PC and in cmd I navigate to the SDK folder. So far thats all I m doing and checking its connected with "adb devices" which always comes up empty. Just want to make sure I m not missing any steps considering I have the usb drivers installed and the sdk SHOULD be installed correctly since i can access them when the phone is on.
danboard said:
I just tried changing my directory for the sdk but doesn't seem to help. Just to make sure is there anything i need to do once inside the OpenRecovery? After loading up the update.zip i connect it to my PC and in cmd I navigate to the SDK folder. So far thats all I m doing and checking its connected with "adb devices" which always comes up empty. Just want to make sure I m not missing any steps considering I have the usb drivers installed and the sdk SHOULD be installed correctly since i can access them when the phone is on.
Click to expand...
Click to collapse
I have the same problem as you described. Is it solved?
I am using windows 7 and the driver is also installed correctly. only problem is the empty device list..
micdim said:
I have the same problem as you described. Is it solved?
I am using windows 7 and the driver is also installed correctly. only problem is the empty device list..
Click to expand...
Click to collapse
Seems OK now. I just reinstalled official SDK.
dl.google.com/android/installer_r08-windows.exe
Getting the SDK installed didn't come without a couple issues, but I managed finally to get it working. Now, how do I transfer files to and from my g2x? I tried "adb push c:\users\eric\downloads\Pink Floyd /sdcard/music" and nothing happens. It doesn't give me some error in the command prompt or anything it just sits there indefinitely. I saw some videos that showed a success message after the files were transferred.
Should I be in "c:\sdk\" or "c:\sdk\platform-tools" to execute the push/pull commands? Does it even matter? I tried doing it from both and I got the same results from both. I'm thinking it's just something small that I'm missing, but unfortunately I can't seem to find what that may be. HELP PLEASE!
e4e5nf3nc6 said:
Getting the SDK installed didn't come without a couple issues, but I managed finally to get it working. Now, how do I transfer files to and from my g2x? I tried "adb push c:\users\eric\downloads\Pink Floyd /sdcard/music" and nothing happens. It doesn't give me some error in the command prompt or anything it just sits there indefinitely. I saw some videos that showed a success message after the files were transferred.
Should I be in "c:\sdk\" or "c:\sdk\platform-tools" to execute the push/pull commands? Does it even matter? I tried doing it from both and I got the same results from both. I'm thinking it's just something small that I'm missing, but unfortunately I can't seem to find what that may be. HELP PLEASE!
Click to expand...
Click to collapse
For ADB Push/Pull, I place my files in the "platform-tools" folder.
It should be something like this. -
cd \AndroidSDK\platform-tools
adb devices
adb remount
adb push Whatever.apk /system/app
adb remount
adb reboot
I was using the wrong slashes like a moron. Too much Sunday beer I guess.
Sent from my LG-P999 using xda premium
Hi,
I have a Yarvik Tab250 and I want to modify the build.prop so i can install any app I'd like to. I've found the info i need to do here:
w w w.hembrow.eu/personal/yarviktab250.html
But I can't get ADB to list my device, my device is on, and debugging is turned on, and it can't list it under "adb devices". I know on linux you have to make a specific folder or something like that, do you have to do anything special in Windows? I only really have access to Windows, and limited linux knowledge.
As mentioned above, Also, if anyone can help with flashing a working play market on my tablet, i'd very much appreciate it!
Thanks!
You need to have the android SDK installed properly on Windows. The path stamemt must be correct for ADB to function properly.
Sent from my LG-P500 using XDA
Do you have the proper drivers for it installed
Sent from my HTC One X using Tapatalk 2
adb is an application that is part of android SDk and can be run from the command prompt in Windows. There is a windows application Android Commander that uses a gui to issue adb commands, it is very powerful program and I recomend it. you will be able to use it to pull the build.prop file edit it with a text.editor and push it back to the Phone. It can connect to the phone by wifi or with the usb cable. Of course android bebugging must be enabled on the phone. you can find it here. http://androidcommander.com/
I hope this helps.
ADB for dummies
http://forum.xda-developers.com/showthread.php?t=502010
Hey guys, I've frequenting this site for some time now and as you can see I don't ever post.. I usually don't have an issues figuring stuff out.. I have experience rooting GSII, GSIII, EVO 4G LTE and DROID RAZR... But for some reason I can't seem to root my TF700T. I've followed the directions in the "ALL IN ONE" guide exactly (or as it would seem I didn't....)
Yes debugging is on, yes unknown sources, yes I ran the .bat file as admin... I even uninstalled the TF700 drivers and reinstalled them to see if that would work... but.. I run the .bat file, press 1/enter.. it reminds me to have debugging on, unknown sources and drivers for ADB... then the command prompt just disappears without any notion or confirmation I've successfully rooted ( is that normal?).
Anyways, I'm not sure what I'm missing (obviously) but does anyone know where I may be ****ing up? Thanks.
... weird... I didn't do anything differently I just kept running the .bat over and over again and eventually it moved on to the next steps.....
Open a command prompt and get into the directory you saved it in and run it from there. Worked for me that way after having the same issue as you.
MooreHeat said:
Hey guys, I've frequenting this site for some time now and as you can see I don't ever post.. I usually don't have an issues figuring stuff out.. I have experience rooting GSII, GSIII, EVO 4G LTE and DROID RAZR... But for some reason I can't seem to root my TF700T. I've followed the directions in the "ALL IN ONE" guide exactly (or as it would seem I didn't....)
Yes debugging is on, yes unknown sources, yes I ran the .bat file as admin... I even uninstalled the TF700 drivers and reinstalled them to see if that would work... but.. I run the .bat file, press 1/enter.. it reminds me to have debugging on, unknown sources and drivers for ADB... then the command prompt just disappears without any notion or confirmation I've successfully rooted ( is that normal?).
Anyways, I'm not sure what I'm missing (obviously) but does anyone know where I may be ****ing up? Thanks.
Click to expand...
Click to collapse
I had the exact same problem with the window closing and all you have to do is run it through a command prompt and It will work fine
sent from My Own Galaxy
if you're using debugfs method, I've read it doesn't play nice if you have Android SDK and ADB installed on your PC. It contains everything needed. Somehow, haveing ADB A-SDK causes some weird conflict/error. I'm not aware if this has been resolved.
Ya I figured it out... I actually didn't need to run it through cmd prompt... it just finally worked... lol
Sent from my SGH-I747 using xda app-developers app
This incorporates the ideas of http://forum.xda-developers.com/showthread.php?t=2144709, so if you want to see how this was resolved for the Nexus 4, check out that thread.
Okay. So you've flashed a spanking new 4.2.2 ROM and ADB no longer talks to your Sensation. What happened?
Well, the fact is that 4.2.2 is significantly more secure, in the good sense. It enforces RSA authentication via ADB. However, RSA authentication is supported only in recent versions of ADB.
What to do?
First, make sure you have the latest version of ADB on your PC.
On Windows you can quickly find out if you your version of ADB is up to date. Check your ".android" folder and see if it holds a file called "adbkey".
On any platform type "adb version" to verify that you have the latest version of ADB. Versions 1.0.31+ support RSA authentication.
-- So now, if you have ADB 1.0.31 or higher. You can skip directly to step 2, then.
-- If you do not have ADB 1.0.31 or higher, and you have the full Android SDK installed, open the SDK manager and update it. If you only have ADB and fastboot installed in a folder on your PC, overwrite files in the folder with those in the corresponding zip file attached (windows or linux -- sorry! I don't have Mac versions at this time). These come from version 16.01 of the android platform-tools package, if you are curious.
-- if you have never installed the SDK or ADB or fastboot, now is the time to do that. I recommend going to http://developer.android.com/sdk/index.html to get started.
[*]Enable USB debugging on your phone
USB debugging is now enabled by selecting Android Debugging in System Settings > Developer Options.
"I don't have the Developer Options items in System Settings!!"
In Android 4.2.x, you need to go to System Settings > About Phone and tap the Build Number item about 6 or 8 times, and Developer Options will reappear.
[*]Plug in the USB cable. Securely.
Dismiss the USB mass storage window.
"I connected the cable, but nothing happened!!"
Okay, chill. You won't get a response until ADB tries to connect to your Sensation. So go ahead and start ADB on your PC. Suggested command:
Code:
adb devices
"Now ADB started, but nothing's happening on my computer!!!"
Uh, didn't I just advise you to chill ? Take a look at your phone...
"What's this pop-up that just popped up??"
(See image below)
Congratulations, that is Android asking your permission to store an RSA key on your Sensation for ADB interaction with your PC.
Fearlessly accept it.
Hint: check the "Always allow from this computer" box to save time later on.
The RSA authentication key you just accepted will be stored on your phone in the file /data/misc/adb/adb_keys.
You are now good to go. Just 3 easy steps with a minimum of panic.
Questions? Problems? Ask away!
Many thanks to XDA member skipjacks for the idea for this post
Hi,
Nice! :good:
People should also not use USB 3.0 slots or USB hubs.
Try several slots if the front ones do not work.
Windows 7 & 8 drivers are HERE in case anyone needs them...
malybru said:
People should also not use USB 3.0 slots or USB hubs.
Click to expand...
Click to collapse
I understand about the hubs, but why not USB 3.0?
Skipjacks said:
I understand about the hubs, but why not USB 3.0?
Click to expand...
Click to collapse
Hi,
I have read a lot of instances of "Device not recognized" when using 3.0 slots.
I am not saying it will never work.
But ,if you use one,and it does not work,then,try it on a 2.0 slot.
Thanks for the post
few problems:
- I tried updating ADB with SDK manager. It kept saying something was accesing the installation folder. even after I closed explorer, virusscanner etc. I replaced the files with the zip attachement, but still a weird issue.
- another thing. Before I updated adb reported error: device offline. After update the issue persists. not using any hubs or USB 3.0. I think it's because I'm not using the stock cable that came with the phone.
onemanshow85 said:
Thanks for the post
few problems:
- I tried updating ADB with SDK manager. It kept saying something was accesing the installation folder. even after I closed explorer, virusscanner etc. I replaced the files with the zip attachement, but still a weird issue.
- another thing. Before I updated adb reported error: device offline. After update the issue persists. not using any hubs or USB 3.0. I think it's because I'm not using the stock cable that came with the phone.
Click to expand...
Click to collapse
Hi,
I think there is one solution that will address both issues. Before I mention it, let me ask: are you sure you enabled USB debugging on your Sensation? This is confirmed if, when you plug in the cable to your PC, you immediately get a USB debugging icon in the Notification Bar.
Glad we got that out of the way!
Unplug your device from the PC.
Anyhow, since you already have the SDK installed, the recommended way to update is to use the SDK Manager.
--in Windows, I think this is an executable in the tools sub-folder of your main android SDK folder. Double clock on it.
--in Linux, start up a terminal and type
Code:
android
if that doesn't do it, CD to the /tools directory in android-sdk-linux, or wherever you put the SDK, first. Then type "android".
The window that opens when you start SDK Manager should show that you need an update to (at least) platform-tools. Go ahead and do the update. You will have to accept some license(s) - accept it or them.
Once the install is complete, close SDK Manager.
Now plug your USB cable back in, and try out the "adb devices" command. It should work.
Suppose you still get "device not found", though. Try the following: again unplug.
Type the command:
Code:
adb kill-server
Now plug the phone back in, verify that you have USB debugging, and try "adb devices".
If no go, let me know what platform you are running, etc. I've heard it could be the cable, but I think that you just need to make sure it is plugged in securely.
BTW, the reason you probably won't have to do the adb kill-server step is that the SDK Manager kills running adb processes during the install.
Let me know how it goes!
Yrs,
dkephart
Sent from my HTC Sensation using xda premium
tnx. I was somewhat ehead of the steps you mentioned. problem was that SDK manager can't install anything cause it can't seem to kill any other adb proces. But I used a workaround for that so no problem there.
ADB does find my device, only it is stated as offline. I will have to try it again with the stock cable that came with the phone. Then I'll know if this is a software issue. Currently I'm using a complete random micro-USB cable wich I found on work laying around.
I'll let you know if stock cable is any difference. If so, it might be usefull info for ppl to know to always use stock cable while using ADB/Fastboot
onemanshow85 said:
tnx. I was somewhat ehead of the steps you mentioned. problem was that SDK manager can't install anything cause it can't seem to kill any other adb proces. But I used a workaround for that so no problem there.
ADB does find my device, only it is stated as offline. I will have to try it again with the stock cable that came with the phone. Then I'll know if this is a software issue. Currently I'm using a complete random micro-USB cable wich I found on work laying around.
I'll let you know if stock cable is any difference. If so, it might be usefull info for ppl to know to always use stock cable while using ADB/Fastboot
Click to expand...
Click to collapse
Yeah... my random selection doesn't have this problem. But I once seemed to have it with the official cable. You might want to try rebooting both the phone and the PC.
Sent from my HTC Sensation using xda premium
The stock cable did the trick. everything works fine with the stock cable.
So if ppl find any trouble using ADB with a cable other then stock, this might cause the problem.
onemanshow85 said:
The stock cable did the trick. everything works fine with the stock cable.
So if ppl find any trouble using ADB with a cable other then stock, this might cause the problem.
Click to expand...
Click to collapse
Great find...and extra points to anyone who determines why this might be the case...
Sent from my HTC Sensation using xda premium
dkephart said:
Great find...and extra points to anyone who determines why this might be the case...
Sent from my HTC Sensation using xda premium
Click to expand...
Click to collapse
Some really cheap cables only have 2 wires in them and can only be used for charging. You need the other wires for data transfer.
But some companies only put the charging wires in to save money on the copper.
It must be a REALLY low quality cable though. I mean I get all my cables on Monoprice for like $1-$2 and they all work great for data.
Or, the cable does have all the internal wires and one is just broken inside.
Sent from my HTC Sensation using xda app-developers app
I've done everything in the thread, I can see my htc when I run the adb command but I don't get the pop-up on my phone. I tried the stock cable and different one but nothing. I'm on latest albinoman ROM. what should I do ?
P.S : I tried rebooting both the phone and pc but still the same problem.
nemovich said:
I've done everything in the thread, I can see my htc when I run the adb command but I don't get the pop-up on my phone. I tried the stock cable and different one but nothing. I'm on latest albinoman ROM. what should I do ?
P.S : I tried rebooting both the phone and pc but still the same problem.
Click to expand...
Click to collapse
You get your serial number and "device offline" from the adb devices command?
Sent from my HTC Sensation using xda premium
dkephart said:
You get your serial number and "device offline" from the adb devices command?
Sent from my HTC Sensation using xda premium
Click to expand...
Click to collapse
no just the serial number
nemovich said:
no just the serial number
Click to expand...
Click to collapse
I'm puzzled, then. What happens when you do "adb shell"?
And if that comes back with the shell prompt (a $), then what happens if you type "su"?
Sent from my HTC Sensation using xda premium
dkephart said:
I'm puzzled, then. What happens when you do "adb shell"?
And if that comes back with the shell prompt (a $), then what happens if you type "su"?
Sent from my HTC Sensation using xda premium
Click to expand...
Click to collapse
with adb shell I get $ and with su I get #.
nemovich said:
with adb shell I get $ and with su I get #.
Click to expand...
Click to collapse
Cool! Then you have adb working. To confirm, in the shell, "ls" should come back with a listing of the files on your device. If you do "cd sdcard" and "ls" you get the files on the SD card.
You're good to go.
Sent from my HTC Sensation using xda premium
Yes it's working with shell commands but still not detected by Android Commander for example. It worked when I reverted to stock ROM.
I still don't know why I didn't get the security pop-up though
---------- Post added at 05:07 PM ---------- Previous post was at 04:57 PM ----------
Yes it's working with shell commands but still not detected by Android Commander for example. It worked when I reverted to stock ROM.
I still don't know why I didn't get the security pop-up though
Sent from my HTC Sensation using xda premium
nemovich said:
Yes it's working with shell commands but still not detected by Android Commander for example. It worked when I reverted to stock ROM.
I still don't know why I didn't get the security pop-up though
Click to expand...
Click to collapse
There is still a possibility adb did not update, or that you have more than one copy of adb on your system. Here's another way. cd to the android-sdk- windows folder (you are running windows, right?) and type
Code:
android update sdk --no-ui
...now the SDK manager will run. It takes a while. When done, reboot your PC and plug in your Sensation. Go to the platform-tools subfolder of your SDK folder and run adb from there. You could type "./adb" to make sure. Check your device - the homescreen has to be unlocked - and you should see the pop-up.
I don't really know about Android Commander, so there is always a possibility that that app doesn't handler things right, but I think this will work.
Let me know how it goes...
Sent from my HTC Sensation using xda premium
dkephart said:
There is still a possibility adb did not update, or that you have more than one copy of adb on your system. Here's another way. cd to the android-sdk- windows folder (you are running windows, right?) and type
Code:
android update sdk --no-ui
...now the SDK manager will run. It takes a while. When done, reboot your PC and plug in your Sensation. Go to the platform-tools subfolder of your SDK folder and run adb from there. You could type "./adb" to make sure. Check your device - the homescreen has to be unlocked - and you should see the pop-up.
I don't really know about Android Commander, so there is always a possibility that that app doesn't handler things right, but I think this will work.
Let me know how it goes...
Sent from my HTC Sensation using xda premium
Click to expand...
Click to collapse
when I cd to the sdk folder ( C:\Users\Documents\adt-bundle-windows-x86-20130219), it gives me command not recognized. I can run sdk manager from the folder and everything is up to date.
I run adb from platform-tools and it gives me the same thing as before.
one thing though, I don't see the "adbkey" file in platform-tools but it is there in ".android" folder. so I run it from the later folder too but the still the same thing, no pop-up.
it's not just android commander, a lot of other apps give the same thing.