I need to partition my SD card and keep one of the partitions as ext3.
I resized the SD card, but i don't know how to change the unallocated space to ext3. I'm using MiniTool Partition Wizard.
Someone please help.
It might be just easier to redo from start using this guide: http://android.modaco.com/content/htc-hero-hero-modaco-com/293461/how-to-partition-sdcard/
Cant we just use CWM??
edit: nevermind I decided to test that and ended up deleting my whole SD card. F*ck me -______-
i must be handicapped!
for some reason i can not partition my SD card correctly. i am using clockwork mod recovery 5.0.2.0. i go in partition the SD card for 512mb 0 swap. format the /sd-ext. everything is all good from this point.
my problem is the rest of the SD card is not formatted.
so like a retard i stick the SD card into my windows 7 laptop and format it so i can put the rom on to flash. when i do this i loose the 512mb ext partition it made on the SD card.
what am i doing wrong?
is there a better way to format the remaining space of the SD card without loosing the 512mb ext partition? so i can put the rom on the SD to flash the rom.
Format SD card to fat32 then partition your card in cwm. That's all you have to do
Sent from my PG06100 using Tapatalk 2
afterwards
the how to do i get the rom to the SD card? because if i stick the sd card back into windows laptop it wants to format the card again and wrecks the SD partition.
is there another way to push a rom from laptop to the phone by USB?
After you format the SD Card in Recovery, choose mounts and storage. Then choose USB Mount. After that load the backup of the SD Card back onto the card. If you don't have the Rom in your backup, load it then.
oh okay sorry i didn't understand you clearly but i'd do what prboy said
easy
much easier. i have been doing it the hard way all this time.
thanks both of you for the help.
So then you got it sorted out?
I don't think Windows can recognize/format an ext partition as it's a Linux file system. I had to set up my ext partition yesterday and Windows 7 only read the left over space when I mounted it through the phone and a card reader(14gb card read as 13gb). Should be good to format it when you plug it in.
Sent from the bushes outside your house....you gonna put some pants on anytime soon?
brandontowey said:
I don't think Windows can recognize/format an ext partition as it's a Linux file system. I had to set up my ext partition yesterday and Windows 7 only read the left over space when I mounted it through the phone and a card reader(14gb card read as 13gb). Should be good to format it when you plug it in.
Sent from the bushes outside your house....you gonna put some pants on anytime soon?
Click to expand...
Click to collapse
I run Windows 7. I use SD Card Formatter, it Formats the entire card.
yes i managed to get it all sorted out. it is far easier to do it this way. the way i was doing took me for ever to get something done.
thanks guys for the help.
Glad it's all sorted
So i was looking through 4Ext touch's recovery menu and i saw an option in tools to check for sd card partition alignment so i did and according to that the sd card partitions were not properly aligned (whatever that means) so i backed up the data on my sd card and went to repartition it and now it's asking me to choose a partition size for the 1st and 2nd partition plus the swap. I have no idea what to put, i have a 32gb class 10 sd card. Can someone please explain to me what does this whole sd card partition alignment means and what should i choose?
We dont need to partition SD card for inspire. It is for devices will less ROM space, where you partition SD card and use it as phone storage. So just delete all partitions, and just have one.
ai6908 said:
We dont need to partition SD card for inspire. It is for devices will less ROM space, where you partition SD card and use it as phone storage. So just delete all partitions, and just have one.
Click to expand...
Click to collapse
Ok, thank you very much.
I have Xperia Active with JellyVanilla 2 rev0 [Unlocked BL] installed
Yesterday I partitioned a second partition on my sd card so as I can link apps to sd, created 1027 MB ex2 primary partitoin!
Then, It was mounted, I linked the apps and everything was just GREAT!!!
Then, I slept for about 12 hours and when i'm awake i found the apps I linked yesterday are not shown.
Link2sd couldn't mount the partion, although it could see it!!
It gives me this message:
"Mount script cannot be created.
mount: mounting /dev/block/vold/179:2 on /data/sdext2 failed: Invalid Argument
ext2 may not be supported on your device. Try FAT32 on the second partition"
Click to expand...
Click to collapse
Minitool partition wizard can not see the partition "although I used it yesterday to create it!!"
And now, the windows doesn't read the sd card at all!!
Please, any ideas???
Thanks
If Windows can not read the SD card, then the card is probably hosed. Reboot your computer, try a different card reader / USB port. If you still can't read it, you'll have to reformat the card. Use this program to reformat the SD card (obviously, all data will be lost).
Citizen T-FA said:
I have Xperia Active with FXP CM 10 installed
Yesterday I partitioned a second partition on my sd card so as I can link apps to sd, created 1027 MB ex2 primary partitoin!
Then, It was mounted, I linked the apps and everything was just GREAT!!!
Then, I slept for about 12 hours and when i'm awake i found the apps I linked yesterday are not shown.
Link2sd couldn't mount the partion, although it could see it!!
It gives me this message:
Minitool partition wizard can not see the partition "although I used it yesterday to create it!!"
And now, the windows doesn't read the sd card at all!!
Please, any ideas???
Thanks
Click to expand...
Click to collapse
The message you have means that your device doesn't support 2nd partition in ext2 so you have to create a 2nd partition in FAT32, or eventually in ext3 or ext4. But what do you mean by "the windows doesn't read the sd card at all"?
post-mortem said:
If Windows can not read the SD card, then the card is probably hosed. Reboot your computer, try a different card reader / USB port. If you still can't read it, you'll have to reformat the card. Use this program to reformat the SD card (obviously, all data will be lost).
Click to expand...
Click to collapse
Thanks for your reply
But, when I used the usb connection between the device and my laptop, it read the sd card BUT not the ext2 partition
I think the problem not making windows reading the sd card is about the adapter
p337 said:
The message you have means that your device doesn't support 2nd partition in ext2 so you have to create a 2nd partition in FAT32, or eventually in ext3 or ext4. But what do you mean by "the windows doesn't read the sd card at all"?
Click to expand...
Click to collapse
It supported it yesterday
I linked some games to sd card ext2 and I played them for a long time
When I was awake I didn't find the shortcuts nor the apps i linked and used after linking
There's something weired!
Citizen T-FA said:
Thanks for your reply
But, when I used the usb connection between the device and my laptop, it read the sd card BUT not the ext2 partition
I think the problem not making windows reading the sd card is about the adapter
Click to expand...
Click to collapse
Ah, that's different! Windows does not have built-in support for ext-formatted partitions! You will not be able to see anything on the ext partition from your computer, either directly or through the phone (when SD card is mounted). You will only be able to see what's on the card from within your phone, or by putting the SD card in a linux or mac computer.
post-mortem said:
Ah, that's different! Windows does not have built-in support for ext-formatted partitions! You will not be able to see anything on the ext partition from your computer, either directly or through the phone (when SD card is mounted). You will only be able to see what's on the card from within your phone, or by putting the SD card in a linux or mac computer.
Click to expand...
Click to collapse
so?
Last step I did is that I formatted the sd card by the software you gave me a link to.
BUT, it only formated 13.7 GB!!!! My SD is 16GB, so the real capacity is 14.8!
The difference is the 1GB ext2 partition I created yesterday!
How could I recover it?
Thanks so much by the way for your help
Ok, you need to delete the ext2 partition. Best just delete all partitions, and create a new, primary partition formatted as FAT32.
post-mortem said:
Ok, you need to delete the ext2 partition. Best just delete all partitions, and create a new, primary partition formatted as FAT32.
Click to expand...
Click to collapse
man, how could i do that? I told you, i can't find this partition at all :S
Minitool can't delete all partitions?
post-mortem said:
Minitool can't delete all partitions?
Click to expand...
Click to collapse
No it can't see excep 13.7GB from the 14.8GB sd card
see attachement below
Try using EaseUs.
post-mortem said:
Try using EaseUs.
Click to expand...
Click to collapse
didn't see the partition too :S
Dunno what to do!
nothing reads the ext partition
and in my country it's easier to find a coin in the ocean than to find a linux machine
Citizen T-FA said:
in my country it's easier to find a coin in the ocean than to find a linux machine
Click to expand...
Click to collapse
That's not so hard, it's just big. Wubi let's you kind of dual-boot Windows and Ubuntu, but you can uninstall it any time through Control Panel.
In any case, the ext partition is still there, and your phone should still be able to see it, if it's mounted properly.
post-mortem said:
That's not so hard, it's just big. Wubi let's you kind of dual-boot Windows and Ubuntu, but you can uninstall it any time through Control Panel.
In any case, the ext partition is still there, and your phone should still be able to see it, if it's mounted properly.
Click to expand...
Click to collapse
i'll try this
how could i start over?
now i formatted my phone
how can i find the ext partition and use it?
What do you mean you formatted your phone? You reflashed the ROM?
When you partition the SD card, those partitions will stay there until you remove/change them. In order to access an ext partition on your SD card, it just has to be mounted. All of those *2sd scripts will do that. Link2SD has a menu option which says recreate mount scripts.
post-mortem said:
What do you mean you formatted your phone? You reflashed the ROM?
When you partition the SD card, those partitions will stay there until you remove/change them. In order to access an ext partition on your SD card, it just has to be mounted. All of those *2sd scripts will do that. Link2SD has a menu option which says recreate mount scripts.
Click to expand...
Click to collapse
Oh sorry, I meant that I formatted my card
the menu option in Link2SD doesn't read any ext2 partitions
Citizen T-FA said:
Oh sorry, I meant that I formatted my card
the menu option in Link2SD doesn't read any ext2 partitions
Click to expand...
Click to collapse
It gives me this message
Second partition not found
/dev/block/mmcblk0p2: device not found
Make sure you have two partitions on your SD card and both are primary.
Click to expand...
Click to collapse
Is it too complicated?
That means that your phone cannot read the 2nd partition on the SD card (but you already knew that). Either the partition needs to be reformatted, the partition needs to be removed & recreated, the whole SD card is going bad, or you're using a ROM which does not support ext-formatted partitions (i.e., stock ROMs).
post-mortem said:
That means that your phone cannot read the 2nd partition on the SD card (but you already knew that). Either the partition needs to be reformatted, the partition needs to be removed & recreated, the whole SD card is going bad, or you're using a ROM which does not support ext-formatted partitions (i.e., stock ROMs).
Click to expand...
Click to collapse
the rom supports it, it's not a stock rom, coz as i said before i'm using JellyVanilla JB 4.1.1
no stock JB for xperia phones yet!
also, it already supported the partition and used it yesterday!
So I think i'll try to open the sd using WUBI when it finishes downloading and installing then i'll tell you the results
Thanks anyways
You'll have some fun learning how to use stuff in linux. When you get it up and running, you'll want to use gparted to examine the SD card.
Hello everyone.I made the sd card partition but now I do not have any songs or anything inside SD .They have all deleted or what?Please,tell me what to do so i can restore them.Thank you
When sd partition is made, the sd card is formatted during patitioning. & there is no way to recover files afterwards.
Yes, you can restore them provided that you haven't used the sdcard much.
Use Recuva for windows or TestDisk for linux.
koubos said:
Hello everyone.I made the sd card partition but now I do not have any songs or anything inside SD .They have all deleted or what?Please,tell me what to do so i can restore them.Thank you
Click to expand...
Click to collapse
if windows ain't detecting anything, that means you've created the first partition as ext 2/3/4 (which is wrong partitioning), the first partition should be FAT32 and primary, and the second small partition should be ext 2/3/4 and primary (and i guess you're using it for swap or link2sd etc), and after partitioning, if your windows is detecting properly your first FAT32 partition then you can restore deleted file using Recuva or tune up utilities (and loads of other softwares), recovery is possible after formatting, with a bit of luck...:good: (ie those deleted files shoundt be over-written with some other files you copied to your card)
First don't reuse SD card to save files and try with Remo Recover.