Related
I have three tablets. Not that I owe.. one is mine, another is my sister's, and last one is my cousin's. All tablets are on VEGA-n beta 5.1. My sister's tablet is doing some unexpected things. For starters whenever it is put to sleep it shuts down instead(not right away but after a min or two it shuts down). Second, both mine and hers are on the same network, but when hers gets 10 or more feet away from the wifi source it drops connection while mine still gets excellent connection. Third while on the same network, on hers only certain apps can access the internet while others cannot. Market was working earlier(downloaded Ti backup after reflash) but her Internet Explorer was not working. Now internet explorer works but market does not, even other internet explorers other than the stock one are unable to connect online. Lastly her accelerometer stopped working/was stuck. I reflashed and wiped all data, but nothing. Its still broken.
Should I return it? I have tried all the solutions that fixed some of these problems for me but they don't seem to work on hers. Any help please?!
Wow, its great to see that you all kept the G Tablet in the family.
1. Its an issue many of us have. We feel its software related since it started to occur after flashing the Vegan Rom.
2. Could be a hardware issue for your sister's device. Back it up, wipe it and try it on the fresh install and see how it reacts. If it works fine, then its probably something software related. If it still drops, then its more likely hardware. Return it.
3. Again, faulty installation of the Rom. Back it up, wipe it, and try installing it again. Also you may want to try TNT to see if its Vegan 5.1 related (btw, it doesnt use internet explorer)
4. I would return it if these issues persist.
Hope this helps. Anyone with other advice please chime in.
Thanks,
Scott
For the powering off issue, it sounds like the button might be sticking, on mine it forces the tab off if i hold it down for even a few seconds.
Also by internet explorer, i assume you mean the android browser?
Also is your cousins tab experiencing any of the same problems?
Mine and my cousin's are alright. Only problem I've had is flash crashing occasionally and rebooting. I might try flashing TnT lite on hers and see if there's a difference.
I have to head to work will update once I work on hers more. And thanks for replying..
necromonger89 said:
Mine and my cousin's are alright. Only problem I've had is flash crashing occasionally and rebooting. I might try flashing TnT lite on hers and see if there's a difference.
I have to head to work will update once I work on hers more. And thanks for replying..
Click to expand...
Click to collapse
I have been running vegaN Beta5.1 for a while now. Used to have similar issues with power and such. I flashed Clemson 10.9.3 kernel, it is now up to 10.9.8 and the power issues went away. It also has the lag fix, and some other nice fixes. It installs just like any other rom.
Here is the link: http://forum.xda-developers.com/showthread.php?t=895825
My fellow Canadians...
I have noticed a number of issues with the latest official firmware for the Rogers captivate. I think it would be a good idea to put them all in one place and try to start figuring out what common issues exist and perhaps we can address them all at once. Please state the issue, when it seems to happen, and what if any modifications you have made to your software setup. Maybe someone will notice a pattern or trend and we can get them resolved.
Thanks!
Reserved +10 char
One major issue I have noticed is when updating apps through the 3.1.5 market. It seems to only happen when I am updating an app, not when I am installing a new app:
Sorry!
The application TwLauncher(process com.sec.android.app.twlauncher) has stopped unexpectedly. Please try again.
At which point I have to force close it.
Also, I have experienced random shut downs, I will click the power/screen lock button to unlock the phone, and it seems the phone has shut itself off. If you hold down the power button it boots normally.
Anyone else experiencing these issues?
clemmie said:
One major issue I have noticed is when updating apps through the 3.1.5 market. It seems to only happen when I am updating an app, not when I am installing a new app:
Sorry!
The application TwLauncher(process com.sec.android.app.twlauncher) has stopped unexpectedly. Please try again.
At which point I have to force close it.
Also, I have experienced random shut downs, I will click the power/screen lock button to unlock the phone, and it seems the phone has shut itself off. If you hold down the power button it boots normally.
Anyone else experiencing these issues?
Click to expand...
Click to collapse
Did you try a factory reset after you updated?
Voice for Swype
The voice command for Swype doesn't work.......
1. Speed dial no longer works. Says 'USSD code running' then closes and gives message 'unknown application'
2. GPS has stopped working completely.
As far as the launcher crashes, I don't use touchwiz. I do use Launcher Pro. It does seem to crash every so often. I've replaced all my widgets because I've read somewhere that this might help.
No random shutdowns here.
I talked to a samsung technical support rep and his captivate's swype voice input didn't work either.
iam_immigrant said:
1. Speed dial no longer works. Says 'USSD code running' then closes and gives message 'unknown application'
2. GPS has stopped working completely.
Click to expand...
Click to collapse
GPS works perfectly on mine captivate 2.3.3 and I get better reception and locking time. But GPS will stop working if you flashed a custom Kernel on it! I know that because I tried it and GPS wasn't working when I had a custom Kernel, had to flash back the stock kernel.
Edit: I just tried Speed dial and it's working perfectly, I think there is something wrong on your phone.
Nick0703 said:
GPS works perfectly on mine captivate 2.3.3 and I get better reception and locking time. But GPS will stop working if you flashed a custom Kernel on it! I know that because I tried it and GPS wasn't working when I had a custom Kernel, had to flash back the stock kernel.
Edit: I just tried Speed dial and it's working perfectly, I think there is something wrong on your phone.
Click to expand...
Click to collapse
I also don't have any issues with the GPS or Speed Dial. My only mod was rooting with the FUGU kernel.
erbsmokah said:
Did you try a factory reset after you updated?
Click to expand...
Click to collapse
I hadn't thought of that; I wonder if I'll lose my root? Come to think of it, I wonder if that's causing the launcher crashes...
Nick0703 said:
GPS works perfectly on mine captivate 2.3.3 and I get better reception and locking time. But GPS will stop working if you flashed a custom Kernel on it! I know that because I tried it and GPS wasn't working when I had a custom Kernel, had to flash back the stock kernel.
Edit: I just tried Speed dial and it's working perfectly, I think there is something wrong on your phone.
Click to expand...
Click to collapse
Got the phone from Rogers with 2.1 then upgraded to 2.2 then to 2.3.3 (all done through Kies. GPS was ok but spotty on 2.1 and much better with Froyo but hoped Gingerbread would bring more improvement.
I've tested it since Rogers released 2.3.3 and on a few occasions I've even gone to the roof of my building on a clear day and waited for 45mins!! and nothing! Not lock then lose it but NOTHING! Speed dial I can live without but I actually use the GPS quite a bit.
Since upgrading I've done a factory reset 4 times and even sent it in for repair, which came back saying "upgraded SW and factory reset" which fixed nothing.
I've just rooted (just root nothing else) and I've tried to do use the gps code but I can't even get into that!!
What can I do at this point?
iam_immigrant said:
Got the phone from Rogers with 2.1 then upgraded to 2.2 then to 2.3.3 (all done through Kies. GPS was ok but spotty on 2.1 and much better with Froyo but hoped Gingerbread would bring more improvement.
I've tested it since Rogers released 2.3.3 and on a few occasions I've even gone to the roof of my building on a clear day and waited for 45mins!! and nothing! Not lock then lose it but NOTHING! Speed dial I can live without but I actually use the GPS quite a bit.
Since upgrading I've done a factory reset 4 times and even sent it in for repair, which came back saying "upgraded SW and factory reset" which fixed nothing.
I've just rooted (just root nothing else) and I've tried to do use the gps code but I can't even get into that!!
What can I do at this point?
Click to expand...
Click to collapse
Yeah, with the 2.3.3 you can't access the gps setting by entering the code, because everything you enter the code *#*#3214789650#*#*, you'll get a message saying "Service mode has crashes blablaba...". The only that I found to bypass that was to go to market and install the app "Anycut" then launch it, select New Shortcut, Activity then choose Angry gps.
I'll look up what's the problem that causing you not to get a good gps signal.
Sent from my SGH-I896 using XDA App
Nick0703 said:
Yeah, with the 2.3.3 you can't access the gps setting by entering the code, because everything you enter the code *#*#3214789650#*#*, you'll get a message saying "Service mode has crashes blablaba...". The only that I found to bypass that was to go to market and install the app "Anycut" then launch it, select New Shortcut, Activity then choose Angry gps.
I'll look up what's the problem that causing you not to get a good gps signal.
Sent from my SGH-I896 using XDA App
Click to expand...
Click to collapse
Man I was going nuts trying that gps code. Googled and searched this forum and everything pointed to that code. Was ready to toss my phone off the roof!
Was reading these forums for the past couple weeks learning how to root/flash (just rooted today actually) to get gps working.
I'm guessing I might have to try flashing it again with the stock rom from this thread http://forum.xda-developers.com/showthread.php?t=979133 but gotta do some more reading before attempting it.
iam_immigrant said:
Man I was going nuts trying that gps code. Googled and searched this forum and everything pointed to that code. Was ready to toss my phone off the roof!
Was reading these forums for the past couple weeks learning how to root/flash (just rooted today actually) to get gps working.
I'm guessing I might have to try flashing it again with the stock rom from this thread http://forum.xda-developers.com/showthread.php?t=979133 but gotta do some more reading before attempting it.
Click to expand...
Click to collapse
I use an app called GPS Status from the market. There, in the menu under 'tools', you can 'manage A-GPS state and wipe the location info the GPS has back to scratch. Then download the assistance data from the internet. This worked well for me and I do it from time to time to keep things current.
Sent from my SGH-I896 using XDA App
clemmie said:
One major issue I have noticed is when updating apps through the 3.1.5 market. It seems to only happen when I am updating an app, not when I am installing a new app:
Sorry!
The application TwLauncher(process com.sec.android.app.twlauncher) has stopped unexpectedly. Please try again.
At which point I have to force close it.
Also, I have experienced random shut downs, I will click the power/screen lock button to unlock the phone, and it seems the phone has shut itself off. If you hold down the power button it boots normally.
Anyone else experiencing these issues?
Click to expand...
Click to collapse
How long have you had the phone? The random shut downs is not a ROM issue. I am pretty sure it is a hardware problem. It was acknowledged by Samsung. There is even a list of effected builds. I am sure you could find the build numbers with a little search. I had this problem when I first got the phone last December but had Rogers replace it. If it is the same problem, I think you will notice that the sleep of death only occurs when the battery is like above 85% or somthing like that. It has been a while so I can't exactly remember.
I can't seem to get the firmware actually downloaded. I'm going through kies and it recognizes my phone, and recognizes that I need to upgrade, starts downloading the upgrade and at 12% it disconnects. I have two screen shots here that show what I am talking about.
Any ideas?
clemmie said:
I use an app called GPS Status from the market. There, in the menu under 'tools', you can 'manage A-GPS state and wipe the location info the GPS has back to scratch. Then download the assistance data from the internet. This worked well for me and I do it from time to time to keep things current.
Sent from my SGH-I896 using XDA App
Click to expand...
Click to collapse
Tried this the entire day and still nothing. I know it's kinda cloudy out today but still nothing.
i found 2.3.3 very slow, and poorly built. no voice button in swype PEEVED me off.i was originally making my custom canadian rom off Kh2 (rogers 2.3.3) but i dropped that project and released a canadianized/rogersized KJ3 (2.3.5).
one of the best roms in the dev section. and will be updated by the end of the week with the theming all included. the pic in my sig is a link to the rom if you havent seen EFFIN EH!
Unable to update my Captivate
My captivate is still 2.2 and while connecting to Kies it says this version of the device cannot be updated.
Current version shows PDA: JL1/phone: JL1/CSC: JL1 (xxx).
I had rooted via Super one click and I can see Superuser installed. I havent used it for any purpose.
I removed my external SD card and did factory reset. No luck.
nambisan said:
My captivate is still 2.2 and while connecting to Kies it says this version of the device cannot be updated.
Current version shows PDA: JL1/phone: JL1/CSC: JL1 (xxx).
I had rooted via Super one click and I can see Superuser installed. I havent used it for any purpose.
I removed my external SD card and did factory reset. No luck.
Click to expand...
Click to collapse
flash to stock 2.3.3 using the link in my signature. YOU NEED BOOTLOADERS coming from 2.2
I'm one of the unlucky few who can't get Bluetooth to work with UCLD2 leak ICS.
It doesn't affect everyone. Just some folks.
It crashes for me and I've tried three different ROM's.
UCALC4 doesn't have the problem with bluetooth for me.
Just wondering if anyone out there has come up with a fix for it, or if you have found any custom ROM's that don't have the problem?
Please don't say CM9 because it's using the older Bluetooth code from Gingerbread (IMO) and has a couple other issues that aren't working out for me. Great ROM otherwise though.
CZ, u tried sky ics ucld2 base with the different cwm flashable Bluetooth fixes seanscreamz has? It seems he tried to import the stack from uclc4
icenight89 said:
CZ, u tried sky ics ucld2 base with the different cwm flashable Bluetooth fixes seanscreamz has? It seems he tried to import the stack from uclc4
Click to expand...
Click to collapse
Yep, tried the base by itself, then also tried the #1 and #2 bluetooth fix.
None work for me.
Had to go back to SkyICS UCALC.
My stereo is the double-din JVC unit.
bluetooth fix
I read that a new base is out for SKY ICS and a lot of people are saying that it fixes the bluetooth issue for them.
Tried it. Twice.
Sent from my SAMSUNG-SGH-I727 using xda premium
Duplicate post
Sent from my SAMSUNG-SGH-I727 using xda premium
CZ Eddie said:
Tried it. Twice.
Sent from my SAMSUNG-SGH-I727 using xda premium
Click to expand...
Click to collapse
Are you using darkside to wipe between flashes if so don't. And check your md5s with the files on the SD
Sent from my SGS2 LTE
mr_clean5953 said:
Are you using darkside to wipe between flashes if so don't. And check your md5s with the files on the SD
Sent from my SGS2 LTE
Click to expand...
Click to collapse
I do use darkside.
Sometimes before wiping and sometimes after.
Have downloaded UCLD2 twice, so that's *probably* not the problem.
I hope this Canadian ICS release has some additional Bluetooth fixes.
Otherwise, I may go back to Gingerbread before long.
did you install the radio following Sean's instructs:
http://forum.xda-developers.com/showthread.php?t=1600420
My first ICS rom was a bust.
Then I installed the radio and afterwards installed Sean's 4.2d9:
http://forum.xda-developers.com/showthread.php?t=1602216
I did it exactly, no superwipe, used the cwm touch he said to. Installed the base, then the update. Did not install the bluetooth mods. Only thing I installed was a different battery to fix the ics signal bars from greay to blue.
BT works better than it ever has. I was streaming Slacker and running nav on the way via BT to my Ford truck via Sync to test.
(Sync in my 2010 has always been twitchy; never worked right with my Atrix <previous phone>)
Also BT to a home speaker system is great, also.
rpolansky said:
did you install the radio following Sean's instructs:
http://forum.xda-developers.com/showthread.php?t=1600420
My first ICS rom was a bust.
Then I installed the radio and afterwards installed Sean's 4.2d9:
http://forum.xda-developers.com/showthread.php?t=1602216
I did it exactly, no superwipe, used the cwm touch he said to. Installed the base, then the update. Did not install the bluetooth mods. Only thing I installed was a different battery to fix the ics signal bars from greay to blue.
BT works better than it ever has. I was streaming Slacker and running nav on the way via BT to my Ford truck via Sync to test.
(Sync in my 2010 has always been twitchy; never worked right with my Atrix <previous phone>)
Also BT to a home speaker system is great, also.
Click to expand...
Click to collapse
You should go on sync my ride site make an account and ask them when are you getting a SYNC update, I got my usb and sd car(with new map) two weeks ago, and my car is 2011. The new SYNC is amazing, smooth.
---------- Post added at 03:40 PM ---------- Previous post was at 03:35 PM ----------
I am Running Seans Sky Ice, amazing ROM
Issue for me is car bluetooth, and after working for couple of days it started to connect and reconnect again, after I've been listening to music, so my guess (and this is after testing new radios and few other things) is stock music player does something to bluetooth or bluetooth permissions (as as well as phone it also connects to the car) and once there some connection issues when trying to turn it on through the car, the whole thing just does not work properly.
I never had a problem from update 1 to 6, it started on 8 and seems to happen on 9 again. So for the threads out there that say I've tried all the ROM and it's the same, no it's not it was fine on Update 6 here.
If you are running any other ROM, do a back up and flash Fix 2 first and then if it does not for flash Fix 1, thank you to seanzscreams.
Possible Fix:
What I did is i did a nandroid restore ( and yes it is a good idea to do a back up right after you flashed both base and update and set up LTE, to keep a clean copy)
!!!1) Before setting up or even turning it on, in Titanium Back up, freeze stock music player. !!! and it is important to do so before touching BT, as it may affect permission and this will not work(make sure not to touch MusicFX as it also affect BT permissions)
2) Reboot the device
3) Open Google Music Player and set up your music( please note if you have more then one playlist, make sure you set them up right as songs wont play continually and you will not have ability to skip them using car controls)
Google Play is same as stock, meaning same functionality, same car features and all, so you are not really loosing anything.
4) No close it
5) Go ahead set up BT with the car, you should get two messages one to permit access to phone book and one to permit accesses to call history (well it depends on the car, but if you have a newer system in it they yes) check mark the box so it does not ask you again and click yes/accept.
6) Enjoy. Should be good from now on, I've been listening for it all day, will test it more and let you know.
Please also share your experience and thought on the problem, so maybe I am wrong and it's not the issue and it's something else and we can all get it fixed.
Thank you.
BLUETOOTH IS WORKING NOW!!!!
Unfortunately, none of the possible fixes listed above ever worked for me or other JVC car stereo guys that I know about.
But the newest leak, UCLE2 is working just fine.
Thought it took much longer to recognize my stereo than normal (could just be a one-time issue), it was buzz free, error free and playing my Pandora perfectly!
Here's the leak download:
http://forum.xda-developers.com/showthread.php?t=1652679
CZ Eddie said:
BLUETOOTH IS WORKING NOW!!!!
Unfortunately, none of the possible fixes listed above ever worked for me or other JVC car stereo guys that I know about.
But the newest leak, UCLE2 is working just fine.
Thought it took much longer to recognize my stereo than normal (could just be a one-time issue), it was buzz free, error free and playing my Pandora perfectly!
Here's the leak download:
http://forum.xda-developers.com/showthread.php?t=1652679
Click to expand...
Click to collapse
Ha! Finally! alright, good deal man
Did this fix the timeout issue as well? I'm running UCLE2 as well but still get the timeout once in a while
mine seems to be working fine now on UCLE2 but I've only tested it for a day.
Hi, i was happy seeing that the dev of the CM/Carbon/Slim-Roms didn't just stop but moved from the old original shabbypenguin-thread to xda
the latest Carbon-Build ( CARBON-KK-NIGHTLY-20140825-0209-peregrine.zip ) finally works for the most part on my side, pretty happy with that.
unfortunately 2 things aren't and i wanted to see if anyone else has this issues or has some idea to solve them
first one is, that WiFi won't connect to all networks - at home on a netgear-repeater everything is fine - in the office it won't connect to D-Link and TP-Link routers.
the other, more troubling issue is that bluetooth isn't working as it should - as long as no device is connected, everything is fine, but as soon as it connects to my car-system (MB C-Class w204 without command if that makes any difference ) the bluetooth-process stops, reconnects, stops again and so on...with my laptop everything seems to be working fine and i think the first drive after coupling also worked fine - any idea what can be the cause of this? never had this kind of problem before, be it stock or older unofficial CM-Builds etc...
i'm refering to this thread btw: http://forum.xda-developers.com/moto-g/4g-development/rom-carbonrom-kitkat-t2847887
regards
Termuellinator said:
Hi, i was happy seeing that the dev of the CM/Carbon/Slim-Roms didn't just stop but moved from the old original shabbypenguin-thread to xda
the latest Carbon-Build ( CARBON-KK-NIGHTLY-20140825-0209-peregrine.zip ) finally works for the most part on my side, pretty happy with that.
unfortunately 2 things aren't and i wanted to see if anyone else has this issues or has some idea to solve them
first one is, that WiFi won't connect to all networks - at home on a netgear-repeater everything is fine - in the office it won't connect to D-Link and TP-Link routers.
the other, more troubling issue is that bluetooth isn't working as it should - as long as no device is connected, everything is fine, but as soon as it connects to my car-system (MB C-Class w204 without command if that makes any difference ) the bluetooth-process stops, reconnects, stops again and so on...with my laptop everything seems to be working fine and i think the first drive after coupling also worked fine - any idea what can be the cause of this? never had this kind of problem before, be it stock or older unofficial CM-Builds etc...
i'm refering to this thread btw: http://forum.xda-developers.com/moto-g/4g-development/rom-carbonrom-kitkat-t2847887
regards
Click to expand...
Click to collapse
*push* nobody got any ideas? i would post it in the appropriate thread (especially since this rom is still only nightly) as a potential bug report, but as a new user i'm not able to :/
just another push...somebody must have any idea on what i can try to either solve or at least track down the cause of the issue(s)
sure enough, the BT-issue is worse..
tried the newest build (dirty update and after that clean flash), but still no luck
Termuellinator said:
just another push...somebody must have any idea on what i can try to either solve or at least track down the cause of the issue(s)
sure enough, the BT-issue is worse..
tried the newest build (dirty update and after that clean flash), but still no luck
Click to expand...
Click to collapse
The WiFi bug is a known issue since early August. It affects almost every Moto device (G, G 4G, X and defy?) it's reported several times to CM-s bug tracking system, but nobody cares... You can use custom kernels. Maybe they aren't affected.
I don't know anything about the BT bug.
i found some posts about people having the same kind of wifi-issue, but it is good to know, that the devs are aware and - kind of - working on it
the BT-thingy is driving me insane though...fiddled around a bit, stopping BT-Related processes etc...this somehow did something...my phone now connects and stays connected, i can make phone calls...but the contact list is incomplete - only 3 random contacts are displayed on the car system
haven't rebooted since then, i kind of fear that rebooting will bring back the issue :/
BT still working after reboot, so it seems my "fix" is permanent...must have something to do with deleting the BT-data/cache while process was killed i would think - in case someone else also encounters this problem
still can't acces all my contacts from Car-system though :/
Most nights roms have a lot of issues and it is pretty hard to stay aware all of bugs. Why don't you try something more stable like Pac Man RC or some. Sometimes a different kernel will help sometimes it's the opposite.
Well, i'd rather use a stable version for sure...
sadly, i didn't know about falcon<->peregrine, so i thought i can use all the Moto G roms with my xt1039...
and to this date there are no stable roms for peregrine that i am aware of - an old unofficial CM-Build worked pretty good for me, but CM unfortunatley doesn't offer all the features i want - carbon covers pretty much most of it, so i'm hoping that it will be "bugfree" soon enough ^^
Termuellinator said:
Well, i'd rather use a stable version for sure...
sadly, i didn't know about falcon<->peregrine, so i thought i can use all the Moto G roms with my xt1039...
and to this date there are no stable roms for peregrine that i am aware of - an old unofficial CM-Build worked pretty good for me, but CM unfortunatley doesn't offer all the features i want - carbon covers pretty much most of it, so i'm hoping that it will be "bugfree" soon enough ^^
Click to expand...
Click to collapse
All AOSP rom uses the CM device tree and kernel as a base, so the low level kernel bugs are the same.. Also the last "stable" CM for falcon is dated back to April, so you didn't lose anything with peregrine...
Just in case anyone encounters the same Issues:
with CARBON-KK-NIGHTLY-20140922-0414-peregrine the BT-Problems seem to be resolved, connection works and the contacts are accessible from the car.
WiFi still has problems with dhcp, but as stated, devs are aware of that :good:
bad news: flashed to CARBON-KK-NIGHTLY-20141103-0939-peregrine and the BT-issue is back as in the beginning - com.andoird.bluetooth stops working - but only following the first connect -.-
interestingly going back to my pre-flash-backup didn't resolve the issue (doesn't matter if i just restore or wipe prior to that...but after flashing/restoring the first connect works perfectly)...perhaps that leads to some ideas about the cause?
was just trying to get it to work like the other time by stopping/deleting data of com.andoird.bluetooth, but didn't work this time
ok, figured it out again, this time i'll post my steps in case anyone ever encounters similar issues (and for my future reference in case i encounter them again, too )
1) unpair
2)switch off bluetooth
3) stop com.android.bluetooth in "apps"
4) delete data of com.android.bluetooth
5) reboot
6) pair
7) unpair
8) delete data of com.android.bluetooth
9) pair
10) reboot
at least these are the steps i did and it seems to be working now, again
So I wiped the phone completely, installed the latest CM12 nightly, franco kernel, gapps. The usual. Everything went buttery smooth, connected to wifi, got all my apps installed, settings set, and set my phone down.
Come back to it a few hours later and there was an exclamation mark over the wifi icon, which took several seconds to go away. Now the wifi is INCREDIBLY slow and/or won't work. Facebook won't load, webpages won't, the play store will let me search around it I can download an app but it takes maybe a minute of just sitting there before it starts to download (and then it will download at a slow speed but not this excruciatingly slow speed).
I've used this same setup for a long time and never had this problem, nor have I ever had this problem with any combination of phone/rom/kernel/settings. It wasn't even happening earlier, it just started within the past hour. Has this happened to you guys? What's going on, and how do I fix it?
There's no problem with lag as far as I can tell. Everything works great except the wifi, and everything WAS working perfectly until the wifi started acting up an hour ago.
LTE works fine. Things that didn't help the problem:
Rebooting
Wiping cache, dalvik, and internal storage then rebooting
Forgetting network and reconnecting
I'm sure I could reset the entire phone and things would work again because this must be some bug, but I'd rather not have to do that.
.Psd
I have this issue and having more time than brains I hammer at it until my desire is met!
I first thought it was from dirty flashing but it isn't.
I found that opening my wifi connection and getting to advanced settings and the setting DHCP to static and giving it any IP address in your range. Mine said it was 192.168.1.192 so I went with 192.168.1.19(4) and bam it worked!
I have done this with iphones by giving them the DNS of google 8.8.8.8
Good luck
Rick
dentman said:
.Psd
I have this issue and having more time than brains I hammer at it until my desire is met!
I first thought it was from dirty flashing but it isn't.
I found that opening my wifi connection and getting to advanced settings and the setting DHCP to static and giving it any IP address in your range. Mine said it was 192.168.1.192 so I went with 192.168.1.19(4) and bam it worked!
I have done this with iphones by giving them the DNS of google 8.8.8.8
Good luck
Rick
Click to expand...
Click to collapse
I'll try it, but then how come it was working fine earlier and now it's being problematic? Also, I don't see any setting to change the DHCP...
(I've never had to do this before, even with this exact setup... :/)
dineshjumani said:
I did not face this issue till now but it seems opo have many issue I have issue with lag in games and did you try factory reset or try installing again and please also help me by telling do you have lag in games in opo in small games like subway surfers or dumb ways to die 2
Click to expand...
Click to collapse
You're already discussing this here:
http://forum.xda-developers.com/showthread.php?t=3066492
Transmitted via Bacon
---------- Post added at 15:56 ---------- Previous post was at 15:53 ----------
.psd said:
I'll try it, but then how come it was working fine earlier and now it's being problematic? Also, I don't see any setting to change the DHCP...
(I've never had to do this before, even with this exact setup... :/)
Click to expand...
Click to collapse
Are you running the same build of Franco as when it was working perfectly? Something could have changed within the kernel perhaps, try using the stock kernel with a ROM before creating bug reports.
Transmitted via Bacon
This isn't a bug report, and it's explicitly regarding a setup (perhaps the most popular setup) involving a custom rom and kernel.
The kernel version is the same. As I stated, everything worked fine, as it ALWAYS does with this very stable setup (OPO + CM12 + Franco kernel), then when I came back to my phone the wifi was having problems and has been since.
I just wiped the phone completely and reinstalled the rom and kernel, and it's still having the problem. The only difference is now I can't reinstall any apps because the Internet is effectively nonexistent...
.psd said:
This isn't a bug report, and it's explicitly regarding a setup (perhaps the most popular setup) involving a custom rom and kernel.
The kernel version is the same. As I stated, everything worked fine, as it ALWAYS does with this very stable setup (OPO + CM12 + Franco kernel), then when I came back to my phone the wifi was having problems and has been since.
I just wiped the phone completely and reinstalled the rom and kernel, and it's still having the problem. The only difference is now I can't reinstall any apps because the Internet is effectively nonexistent...
Click to expand...
Click to collapse
Ok, but you didn't mention which build of Franco you're on. Franco evolves, like any other kernel, to keep up with how the ROMs evolve. And vice versa.
I had assumed that seeing as it was after a flash, that the chances of either the ROM build version or the kernel build version changing were pretty high. Or don't you update your ROM or your kernel? If you're on the latest CM12 nightly but still using whatever build of Franco you're on then it isn't the same setup you've been using, because part of that config has changed (different ROM build).
Anyway, you came here looking for help. And one of the first things anyone who's even slightly capable in the world of ROM/kernel flashing will tell you is to test without the custom kernel. That's basic troubleshooting, it's a process of elimination. If the problem stops, there's a high chance the kernel was causing it (or there's a mismatch between the kernel build and the new ROM build), if the problem persists you've pretty much ruled out the kernel as the problem, move on to next possible cause. It'll take you less than a minute to dirty flash the ROM zip so you're on the stock kernel, not hard at all.
Transmitted via Bacon
---------- Post added at 16:25 ---------- Previous post was at 16:20 ----------
PS. The q&a and troubleshooting section is here:
http://forum.xda-developers.com/oneplus-one/help
Transmitted via Bacon
Perhaps we misunderstood rah other. What I meant was that earlier today I wiped my device and installed cm12 and Franco kernel. Everything was working fine, I downloaded all my apps (over wifi, which was working fine), set my settings, then left the device alone for several hours. When I picked it up later on, there was an exclamation mark on the wifi icon, which took awhile to go away. Even after it went away, the Wifi has remained dysfunctional.
A wipe and reflash doesn't restore proper wifi functionality. At worst, I would expect it to restore wifi and then give me trouble some hours later, but in fact the wifi is botched from the get go, suggesting that something in my phone has changed.
But my main point was to see if this is a problem others have experienced, because I never have before. And if people had experienced if, I'm curious what they did to resolve the issue.
.psd said:
Perhaps we misunderstood rah other. What I meant was that earlier today I wiped my device and installed cm12 and Franco kernel. Everything was working fine, I downloaded all my apps (over wifi, which was working fine), set my settings, then left the device alone for several hours. When I picked it up later on, there was an exclamation mark on the wifi icon, which took awhile to go away. Even after it went away, the Wifi has remained dysfunctional.
A wipe and reflash doesn't restore proper wifi functionality. At worst, I would expect it to restore wifi and then give me trouble some hours later, but in fact the wifi is botched from the get go, suggesting that something in my phone has changed.
But my main point was to see if this is a problem others have experienced, because I never have before. And if people had experienced if, I'm curious what they did to resolve the issue.
Click to expand...
Click to collapse
Ok, fair enough. But like I said, the first thing you need to do is get rid of the custom kernel in order to test properly. The fact that it was working fine earlier doesn't mean it can't be the kernel, at the same time I'm not saying that it is the kernel, what I'm saying is testing on stock is the first step in working this out, you need to remove any variables.
Transmitted via Bacon
I think it's my modem/router (net gear c3000). Will look more into the situation later.
EDIT: bingo. Factory reset the modem and problem fixed immediately.
Great, glad to see you got it worked out.
Transmitted via Bacon
Have the same problem connecting to wifi after I installed CM12 Nightly.
Doing a factory reset now and checking.
Hope this should solve the wifi issue
---------- Post added at 10:35 AM ---------- Previous post was at 10:24 AM ----------
Did factory reset but still the same issue.
The wifi status is still connecting from a long time........doesn't get connected
Did turn on and turn off the flight mode too (read in few posts that it solved the issue). But it did not solve the issue...
Any help or suggestion?