Database Info

Custom initial boot splash screens in full 480x640 - 2nd Round Posted

Using the tools and info from pfcsabre and the below link I created some initial splash screen .nbh files. This replaces the very first picture you see when you turn on your phone and displays your radio version and such. If you want to make your own use this link. http://forum.xda-developers.com/showthread.php?t=436105
Since I spent a little bit of time making these files and other files I haven't uploaded yet, I figured I would share them. I will probably upload more later.
Instructions: - Make sure your phone is Hard-SPL
1. Download the RaphaelCustomRUU.zip and unzip it to the RaphaelCustomRUU.exe file.
2. Download one of the Splash.zip files and unzip it to the same folder as the RaphaelCustomRUU.exe file (Make sure there is only 1 .nbh file in the same folder as the .exe,,, if you download multiple splashes put them in a subfolder)
3. Connect your phone to your PC and Run the RaphaelCustomRUU.exe file and follow the prompts. Its the exact same method as burning a ROM, but these files only replace the Splash screen and nothing else.
4. It will take about 20-30 seconds to burn and your phone will reboot displaying the pics in full 480*640 resolution.
5. These look incredible when you first boot up your phone.
Splashes:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Downloads:
RaphaelCustomRUU.zip
Gears of War.zip
Matrix Trinity.zip
Lich King.zip
Kelly Brook.zip
Warnings:
I take no responsibility for any problems you have.
Make sure your phone is Hard-SPL and follow the instructions.
These are only for the Raphael, do not use on the Diamond.
I have tested all of these files and confirmed they all worked.

Splashes V2:
Downloads:
RaphaelCustomRUU.zip
Decepticons.zip
Metroid.zip
Slayer.zip
Jennifer Lopez.zip

4 more boot splash screens are done. I will upload them tomorrow. My new favorite is a sweet looking Transformers Decepticons Logo.

Can you make these please?

heres a couple id like to have done if at all possible.
thanks in advance,
Jstar

I just overwrite the image to what the default boot screen was. (You can find out what the original filename was somewhere in Advanced Config)

Maveaxe said:
Can you make these please?
Click to expand...
Click to collapse
JstarLuvsTina said:
heres a couple id like to have done if at all possible.
thanks in advance,
Jstar
Click to expand...
Click to collapse
If both of you look here, I think you will both be pleasantly surprised.
http://forum.xda-developers.com/showthread.php?t=462668

CarlCastro said:
I just overwrite the image to what the default boot screen was. (You can find out what the original filename was somewhere in Advanced Config)
Click to expand...
Click to collapse
This process changes the 1st boot screen, the one with the red letters in the lower right corner. It cannot be done within Windows by overwriting a file, it must be burnt in. When turning on your phone you can have up to 4 pictures, This boot screen process, follow by up to 2 splash screens (usually windows & operator splashes), then your wallpaper.

Recovery Customization Engine version 2.0 - Color,Background,ProgressBar Mod !!!

Hey,
Versions supported for colormod :
MAGIC/HERO/DREAM - 1.6.2 (Waiting for 1.7 sources )
Nexus - 1.7
cliq - 1.6.2
Desire - 1.6.2
Versions supported for noncolormod :
All recoveries, even koush's except you wont see the difference cuz he never calls on the png's
Thanks to amon_ra for his recovery and thanks to all those he thanked
Script is based on the dev kitchen by dsixda. I removed everything that was not needed for this task.
Requirements : Device drivers properly installed
Windows Operating System
Instructions :
1. Download the 7z file and extract.
2. You will get 3 folders and 2 batch files.
3. Run either batch.
INFO:
Noncolormod just allows you to change background image and progressbar
Colormod batch does what the noncolormod does + allows you to customize the colors inside the recovery
Guys 2 tips :
1. If image is layered please flatten it in photoshop or edit in paint.
2. Use this tool to configure a range of colors. Just grab the decimal values and feed in the script.
FYI: This will not work with Koush's recovery as he ignores the background png
PS : Donot ask for assitance from amonra if you are using the repackaged recovery image produced by this script. He WILL ignore u
PS : I AM NOT RESPONSIBLE IF YOU ARE NOT CAPABLE OF FOLLOWING INSTRUCTIONS. I EXPECT A DECENT LEVEL OF UNDERSTANDING/TECHNICAL ABILITIES FROM THOSE WHO ARE USING THIS SCRIPT.
----------------------------------------------------------------
Update
*Added menu with additional properties
*Can now flash/boot recovery from menu
*Added option for size check
*Allows customization of progressbars
*Keyboard-console fixed for G1 users
*Text-color customization
*Updatescript color customizable
*ProgressBar height adjustable
*A LOT MORE STABLE
*Thanks to amonra no more trackball issues should occur on Hero
----------------------------------------------------------------
Future Updates Expected:
Will bring this to the droid, cliq and desire
Will try to see what else i can make user-optional
Preview :
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Heres the background for those who asked:

Where I can found de Recovery Image for Desire?
Recovery source code is here:
http://github.com/packetlss

Where i can find Amon_RA For Recovery for desire ??

amjad_2020 said:
Where i can find Amon_RA For Recovery for desire ??
Click to expand...
Click to collapse
There is none...

DocRambone said:
There is none...
Click to expand...
Click to collapse
Yes i know but why is there is this post ??

There is one.,. you need to call it from the PC Command line.. he made it for PauloBrien when he rooted the desire..
I dont think its yet possible to have a press home and power option yet

Konradwalsh said:
There is one.,. you need to call it from the PC Command line.. he made it for PauloBrien when he rooted the desire..
I dont think its yet possible to have a press home and power option yet
Click to expand...
Click to collapse
No, this is the only way at the moment, using a PC to call it.
Daneshm90 how I can modify the recovery for Desire?

Does this mean we can boot to recovery now without using the push files method?
JD

JupiterDroid said:
Does this mean we can boot to recovery now without using the push files method?
JD
Click to expand...
Click to collapse
No, only pushing files for the moment.

Wow k so im confused. I dont have the device but i saw the source up on his github and this video and assumed you guys also have a working amon-ra recovery.
So upon further reading, you guys have that step2-windows.bat file to run which loads amonra's recovery ? Any way for those asking, all you have to do is place "any" recovery image under /recovery/old and place 2 images under place-image-here named boot.png and boot1.png and run nocolormod.bat file. If you want to edit the colors by running colormod, make sure the recovery image you place under /recovery/old is amonra's recovery. For how-to help, run the batch file and select "How-to"

please...how to flash recovery image?
...help me please.
Sent from my HTC Desire using the XDA mobile application powered by Tapatalk

Hey, im reading up on it. Im reading this and "essentially" he reboots into recovery through fastboot screen and then runs
adb shell nohup /sbin/recovery &
to bring up the menu. I did not realize it was this complicated for desire recovery. I thought its similar to nexus.
As for flashing, in my script i give the option of choosing boot/flash. You can try those, i doubt itll work on desire now tht i think about it.

Daneshm90 for the moment, the recovery for Desire is write protected, we can't change it to another custom recovery, at the moment, we only can launch it from red triangle recovery mode pushing files and using the command that you say.

[SPLASH] Custom Splash Screens - By Unknownforce

Here's the first of many splash screens to come. I will also take requests, I have Photoshop and all the tools to make customs screens.
This one I "borrowed" from 12MaNy's Splash screens (Thanks!) and simply added the HTC EVO 4G logo and used my limited photoshop skills to spice it up
Install is the same as the others...
You need the windows android SDK package, I'll get a link for it soon.
1.) Copy the evosplash1.rgb565 to your android sdk tools folder
2.) Power off phone
3.) Boot up into boot loader (hold vol down while pressing power)
4.) Go to Fastboot with the volume keys and press the power button
5.) Plug device in (You'll see FASTBOOT USB at the top)
6.) Open a command window in windows (Windows key + r, cmd)
7.) Use "cd" to change to your android sdk tools folder (e.g. "cd c:\androidsdk\tools")
8.) Then type the following (without quotes) "fastboot flash splash1 evosplash1.rgb565" and press enter
9.) Select reboot on the phone with the power button and watch your new splash screen display
First one with preview:
DOWNLOAD HERE
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Second one with preview:
DOWNLOAD HERE

Just whipped up another one, As you can tell I like the color green

Greetings Unknownforce,
Really love your splash screens!
I see they are only for Windows users.
Code:
# fastboot flash splash1 evosplash1.rgb565
sending 'splash1' (750 KB)... OKAY
writing 'splash1'... FAILED (remote: not allowed)
Will you have any for other OS's?
Thank you for all your time and consideration.
--Chris

Sorry Unknownforce,
My bad. I rooted with Unrevoked 3.21, which has an HTBOOT that doesn't have
the "extended" fastboot commands available that the ENG bootloader does. So I
changed the HTBOOT, and your wonderful bootscreen adorns my EVO-supersonic.
Thanks for the great looking screens, and sharing them Unknownforce!
--Chris

Now We Need Matching Bootscreen Please
Unknownforce,
Your splash screens are off the hook. Problem is, when my EVO cycles from the splash screen to the boot animation, it's pretty sad. All of the bootscreens I have loaded pale when viewed aside your awesome splash graphics.
The only solution is an Unknownforce custom bootscreen!! Is there any chance you might be able to put one together that integrates nicely with your cutting edge splash graphics? Pleasssseeeee?

Just adopted the top one! Very nice, Thanks!

tgearman said:
Unknownforce,
Your splash screens are off the hook. Problem is, when my EVO cycles from the splash screen to the boot animation, it's pretty sad. All of the bootscreens I have loaded pale when viewed aside your awesome splash graphics.
The only solution is an Unknownforce custom bootscreen!! Is there any chance you might be able to put one together that integrates nicely with your cutting edge splash graphics? Pleasssseeeee?
Click to expand...
Click to collapse
Or - if you want to pass me the original image graphic and the title graphic, I will create an animated bootscreen and share it with you.
Let's make this happen - our beloved EVOs deserve the best!!!

CTH-EVO said:
I rooted with Unrevoked 3.21, which has an HTBOOT that doesn't have the "extended" fastboot commands available that the ENG bootloader does. So I changed the HTBOOT, and your wonderful bootscreen adorns my EVO-supersonic.
Click to expand...
Click to collapse
Chris, I'm in the same boat as you.
I see you had some difficulty along the way. (/showthread.php?t=799218)
Can you help me to get started in the right direction?

xpanmanx said:
Chris, I'm in the same boat as you.
I see you had some difficulty along the way. (/showthread.php?t=799218)
Can you help me to get started in the right direction?
Click to expand...
Click to collapse
same here
Any one know how to fix this?

Anybody having trouble installing can either get the extended fastboot commands, just search its pretty easy to find, or you can use this method. I didn't figure this out it was done by silentstryder but her ya go.
1) Download Unrevoked Forever's custom splash screen PC36IMG.zip
2) Open the zip and delete the splash1.img
3) Download the custom splash screen you like and rename it: splash1.img
4) put the file in PC36IMG.zip
5) put the Zip on the root of your SD Card.
6) Power Down your phone.
7) Boot your phone into HBOOT (hold down "volume down" and press the power button)
8) Your phone will automatically find the zip and ask if you want to apply it.
9) Press "Volume Up" for yes
10) It will ask to reboot. Press "Volume Up" for yes.
The unrevoked custom splash can be found on their site.
11) your phone reboots, and you see the new Splash Screen.

Thanks
That made things REALLY simple! Thank you so much. I still copy paste boot animations using root explorer... seems easier.

I just wanted to say that the splash with the green jacks looks even better on my phone than my computer screen, and it looks really good on my computer.
Also, I would thank you with the button, but it's not available. So, I thanked a random post of yours.

I tried the method of replacing the splash image but it never asks me to apply. Can anyone help?

amazing!
any chance of doing an orange or blue version of either?

More Boot Splash Screens - DOWNLOADS UP 10/19

Thought I would post up some boot splash screens I cooked up for my personal use.
Note: I am not responsible if these files F**k up your phone, impregnate your wife/sister/mother/dog/cat etc.. Flash at your own risk!
Thanks to tribalartgod and mudknot2005 for the knowledge.
How to install:
1. Download and unzip the file somewhere on your PC.
2. Copy the PD98IMG.zip file you extracted to the root of your SD card.
3. Reboot to bootloader.
4. Once the PD98IMG.zip file has been found, press Vol up to flash it.
5. Reboot
***DOWNLOAD LINKS ARE UP. JUST CLICK ON THE PICTURE OF THE SPLASH YOU WANT TO DOWNLOAD***

Downloads work for me on my phone and PC. for those having trouble downloading on their phones, you might try the Download All Files app available in the market. If you still can't download the file you want PM me with the one you want and and I'll make it a post attachment for you.

Very nice!
I got your 10 char right here

Downloads don't seem to be working
Sent from my HTC Incredible S using xda premium

These are "Killer"man The best I've seen ....Keep up the great work...
Also your downloads are not working .....Dang
Sent from my "Pocket Rocket" Loaded with "CoreDroid 8.1"

rpicaso said:
Click to expand...
Click to collapse
This would be perfect if someone could stick the HTC logo dead center above the Android.

slipmagt said:
This would be perfect if someone could stick the HTC logo dead center above the Android.
Click to expand...
Click to collapse
Done. PD98IMG.zip is attached.

rpicaso said:
How to install:
1. Download and unzip the file somewhere on your PC.
2. Copy the PD98IMG.zip file you extracted to the root of your SD card.
3. Reboot to bootloader.
4. Once the PD98IMG.zip file has been found, press Vol up to flash it.
5. Reboot
Click to expand...
Click to collapse
I did this, and I still have the HTC splash. How do I get rid of it?

slipmagt said:
I did this, and I still have the HTC splash. How do I get rid of it?
Click to expand...
Click to collapse
Do you have more than one PD98IMG file in the root on your sd card?
I got your 10 char right here

Thanks alot, they all look great! I'll be switching them up here and there, till the woman see's just flashed amy lol.

cwhitney24 said:
Do you have more than one PD98IMG file in the root on your sd card?
I got your 10 char right here
Click to expand...
Click to collapse
nope.
I need some of this "I got your 10 char right here".

have you tried just to reflash? ive had some mess up on the flash.

slipmagt said:
I did this, and I still have the HTC splash. How do I get rid of it?
Click to expand...
Click to collapse
You are rooted and S-OFF ?

Custom?
Could you make one of them ones with the Android bot peeing on an Apple? I'd love one of them...

thanks. alot great splash screens.

these splash look really refined.....love the batman and the autobots one specially.....keep up the good work!

I'm trying to get the blue tiger but I just got the first slash that in the pics, can anyone help me figure out how I can get the tiger as my splash screen?
Sent from my Desire HD using XDA App

My splash screen
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
attach files
use adb fastboot command for splash1.img
use CMW *.zip recovery for PD98IMG.zip (first rename PD98IMG_splashscreen.zip to PD98IMG.zip)

I like the look of the one above, but, due to the fact my wife might say something about it, can I get this screen with a android instead of the current image, although I like it. Thanks
PD98img will work. Thanks
Sent from my Inspire 4G using xda app-developers app

rustin921 said:
I like the look of the one above, but, due to the fact my wife might say something about it, can I get this screen with a android instead of the current image, although I like it. Thanks
PD98img will work. Thanks
Sent from my Inspire 4G using xda app-developers app
Click to expand...
Click to collapse
same here XD

PG88IMG Splash screens

Thread closed

jmcclue said:
Hi i made a few splash screens for HTC Desire S... S-OFF phones. Just download the PG88IMG.zip that you want, rename it to just "PG88IMG.zip" put it on your sdcard (NOT in a folder) and boot in to bootloader, bootloader will find the PG88IMG and ask to update splash? press volume up for yes then press power to reboot.
Dont forget to delete it off your sdcard once your done coz everytime you enter bootloader, it will ask to update.
I only made a few simple ones so if anyone has any ideas n wants a splash screen then post your pic here and il make it.
4ext1------------------------------------ 4ext2 -------------------------------- aokp- ---------------------------------monster -------------------------------------ics
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
EYE------------------------------------cyanogenmod2-----------------------------cyanogenmod-------------------aokp
MD5 - PG88IMG-4ext1 - 491ee14fb0096126c5780fe8d5735cf1
MD5 - PG88IMG-4ext2 - dd92ac65d4c297c5b776a9830dbc5f0d
MD5 - PG88IMG-aokp - e39cf5c0e6a3528083fc946ba18e946c
MD5 - PG88IMG-ICS - a90dedf87971fe9917480981e2e538e0
MD5 - PG88IMG-monster - 43e53d2610d8d8c4901c482361230bb7
MD5 - PG88IMG-EYE - b2d7ba9159692ff7b7b1e61d2a30fe85
MD5 - PG88IMG-cyanogenmod - e401381227f7238c456c93d766c8a79f
MD5 - PG88IMG-cyanogenmod2 - 1cff7a0d3973d24e01c581166e1894b3
MD5 - PG88IMG-AOKP2 - 23ba1ec1190fce03ccdea8405c0e41c5
Click to expand...
Click to collapse
After I flashed one of those I got a bootloop. Now my recovery can't mount anything. Any ideas?

VnnAmed said:
After I flashed one of those I got a bootloop. Now my recovery can't mount anything. Any ideas?
Click to expand...
Click to collapse
Dunno bud. I tried all of them without issues and i just dowloaded one, renamed it and placed on my sdcard, booted into bootloader and it flashed fine, booted recovery, wiped cache then rebooted recovery and still no problem with mounting anything. Problem is at ur end...
Extract the file and put the .img file in ur fastboot folder and flash it from fastboot, its the best way anyway.
Command (i think) is
fastboot flash splash1 splash.img

jmcclue said:
Dunno bud. I tried all of them without issues and i just dowloaded one, renamed it and placed on my sdcard, booted into bootloader and it flashed fine, booted recovery, wiped cache then rebooted recovery and still no problem with mounting anything. Problem is at ur end...
Extract the file and put the .img file in ur fastboot folder and flash it from fastboot, its the best way anyway.
Command (i think) is
fastboot flash splash1 splash.img
Click to expand...
Click to collapse
Weird, it rendered my phone useless propably screwing partition table, had to change HBOOT to 9.8 then install RUU. I will gain S-off again and try that later though. Yesterday I was desperate and angry but looking back, much experience gained. BTW do you know some way to repartition nand (am I asking about right thing?)?

I dunno. Sorry that they didnt work for you and u had to go through the whole ruu crap, il remove them and close the thread, 1 person having a problem is one too many. They work fine for me but, hey, every phone is different.

VnnAmed said:
Weird, it rendered my phone useless propably screwing partition table, had to change HBOOT to 9.8 then install RUU. I will gain S-off again and try that later though. Yesterday I was desperate and angry but looking back, much experience gained. BTW do you know some way to repartition nand (am I asking about right thing?)?
Click to expand...
Click to collapse
What recovery do u use?

jmcclue said:
What recovery do u use?
Click to expand...
Click to collapse
TWRP