Ok, I've been looking into cheap cases for my g-tablet, and I found the following witglobal ones mentioned on the forums in a positive light:
http://witglobal.com/goods-2286-10i...for+Viewsonic+Gtablet+10+-+Free+Shipping.html
And here's one that's just a case, no KB, and now uses straps to secure it instead of the tabs (which often block ports, etc):
http://witglobal.com/goods-3531-New...onic+Gtablet+10++Zpad+T2+-+Free+shipping.html
I've got a few questions here I'm hoping you folks can help me with-
1) I like the idea of a USB keyboard to replace my netbook when travelling, but I feel like I don't want/need that all the time. My excuse for owning this in addition to a netbook is that I can use this in multiple orientations (portrait, landscape, etc) and is great to use casually handheld. I feel like a KB case would get in the way in those situations (not to mention make it roughly the same size as my netbook). Do people use the KB cases all the time or only when they want a keyboard? Does it make sense to buy both cases (a keyboard one and a non-KB one) for both scenarios?
2) I noticed that the non-keyboard version has been updated to have straps instead of tabs (holds better and doesn't block ports). Do they also make the keyboarded version with straps now? Or is that only available in tabs? I looked around and found the old tabbed $16 case, so I'm wondering if there is a new strap KB one that I'm missing?
3)Also, what is the best way to go about purchasing these? I've found them on ebay and I see their website (linked above), but I assume both will be shipping from Hong Kong and take a long time. Any US sellers with the same goods? Or a better place to purchase them from, etc?
Thanks!
Electroniccrap.com stocks several cases for the gtab (and it's run by a member here). I use the CLIP and love it. Only down side is that you can't access the full usb port while in the case.
Slim Bluetooth Keyboard + CLIP is the way to go. Built in stand with the case, and your not lugging the keyboard when you don't need it.
I've heard good things about the Clip but its pretty pricey. I bought a witglobal with clips instead of straps, see here:
http://cgi.ebay.com/Fashion-leather...?pt=US_Tablet_Accessories&hash=item4aaa1ba034
the clips hold it really secure. I worry about your second link because straps can stretch. These don't block any ports. It took about two weeks exactly to get mine. A friend at work bought the same case, and it also took about two weeks. Build quality is better than I would expect for a 15$ (shipped) case. I really like the kickstand, and there are little magnets in the straps to hold them down.
I decided not to get a case with integrated keyboard, because I figured more often than not, I wouldn't be using it. I bought a bluetooth keyboard (microsoft 6000) and I just bring that if I need a keyboard for some reason.
Sent from my GTablet using XDA Premium App
I bought a P4 case from ElectronicCrap that doesn't block the USB port. The P4 does not have a built-in keyboard.
I also bought a neoprene-like case meant for a netbook. The case is loose enough to carry the gtab in the P4 case plus a small USB/BT keyboard.
That's the way I roll
Yes, I'm aware of the electroniccrap cases from Steve. They seem nice, and I'd love to support a member here, but there's good reason that I iterated "inexpensive" in my thread title.
Especially if I'm on the fence about purchasing a keyboard one as well, I'm looking for the best-bang-for-my-buck right now. I simply can't justify spending the money on Steve's when there are decent (albeit lower quality material) cases for half the price available.
If I weren't trying to be cheap with this, I'd likely spring for one of those Kindle DX cases I've seen around that appear to fit nicely and are genuinely nice leather material. But sadly that's not in the budget.
As far as the straps vs tabs- I was under the impression that the straps held the device in better, since the tabbed version is actually missing a tab on the right side. Didn't folks say if you hold it the wrong way, the tabbed version would slip right out? I am under the impression that this is exactly why they switched to the strap version. I could be wrong about that.
Indeed, the Kindle DX and plenty of other tablet and Ereader cases use similar strap designs as well. But it is reassuring to hear that the tabs are working for you- makes me feel better about the KB one.
I really want the Clip, but I am not ready to shell out $50 for it. Sigh.
I wouldn't mind seeing the case with straps, but any of those elastic type straps I've ever seen start to loosen. These clips are metal (aluminum?) They hold it crazy tight, I can't imagine what kind of force it would take to come out of there. When I first got it I put the tablet in and held it over the couch and just shook it like crazy and it didn't budge. I mentioned I had a co-worker get the same case. His tablet was also held in very tight.
Not trying to talk you one way or another, but I looked at the Kindle cases too and if you read any updated reviews of them it seemed like they were always getting stretched out to the point of people putting velcro on the tab just to hold it in there. I wasn't a fan of the P4 style cases, because personally I think that sleeve all around adds too much bulk to the whole thing. The witglobal one is like the exact size of the tablet, perfect imo.
The clip looks awesome but no way I was paying $50 for a case either. I also didn't want to lug a keyboard around all the time. If I was going to do that I would just take my laptop everywhere. I would say, see if you can find any of the later reviews, or later threads on those kindle cases. It seemed like a lot of people were having the straps stretch out. The other thing looking at the picture of the witglobal strap case, it almost looks like the one strap would go right over the power button and the other might cover the power/headphone ports.
Hope that helps
Sent from my GTablet using XDA Premium Apps
FeatherKing said:
I wouldn't mind seeing the case with straps, but any of those elastic type straps I've ever seen start to loosen. These clips are metal (aluminum?) They hold it crazy tight, I can't imagine what kind of force it would take to come out of there. When I first got it I put the tablet in and held it over the couch and just shook it like crazy and it didn't budge. I mentioned I had a co-worker get the same case. His tablet was also held in very tight.
...
I also didn't want to lug a keyboard around all the time. If I was going to do that I would just take my laptop everywhere. I would say, see if you can find any of the later reviews, or later threads on those kindle cases. It seemed like a lot of people were having the straps stretch out. The other thing looking at the picture of the witglobal strap case, it almost looks like the one strap would go right over the power button and the other might cover the power/headphone ports.
Hope that helps
Sent from my GTablet using XDA Premium Apps
Click to expand...
Click to collapse
Ugh, now I can't decide which one I want! The straps I thought make more sense, and the whole point was that they were supposed to be *better* than the clips at holding it in!
I'm so confused- does anyone have any experience with the strapped design that they can chime in with? I know these things take weeks to arrive from China, so I don't want to order one, find out it stinks, and then have to start over waiting for another one!
Related
Anyone found a suitable armband to go running/work out in while keeping my lovely g2x safe and sound from falling out or getting my sweat all over?
or if you have a universal sized armband and are having success with your g2x in it please do share your experiences!
EDIT:
Review of the VanGoddy Armband: http://forum.xda-developers.com/showpost.php?p=14056733&postcount=16
Check Amazon.
http://www.amazon.com/gp/aw/s/ref=is_box_/181-1178860-7666418?k=g2x+arm+band
Check out the third choice . LOL
Sent from my LG-P999 using XDA Premium App
KRAZYADROIDMASTER said:
Check Amazon.
http://www.amazon.com/gp/aw/s/ref=is_box_/181-1178860-7666418?k=g2x+arm+band
Check out the third choice . LOL
Sent from my LG-P999 using XDA Premium App
Click to expand...
Click to collapse
[email protected] choice!
yea i looked at those armbands that are on amazon and I am not too wild about them... right now my biggest candidate is the adidas miCoach armband...
http://www.google.com/products/cata...=X&ei=chXSTZDEJoWftwfhsOyXCg&ved=0CG0Q8wIwAA#
though it is nylon and i dont know how i feel about nylon... i would prefer neoprene...
looking for an armband as well. All I saw were those few amazon entries and one bad review that said the phone sticks up above the cover. I might go to target and try a bunch for the iphone.
kev0153 said:
looking for an armband as well. All I saw were those few amazon entries and one bad review that said the phone sticks up above the cover. I might go to target and try a bunch for the iphone.
Click to expand...
Click to collapse
Well I am going to take one for the team, I ordered the one that amazon has listed with the ONE bad review... for 17 bux shipped so its whatever...
i went to best buy today and opened a bunch of boxes of stuff and nothing seemed to really fit... i tried the miCoach for the IP4 and it was a huge fail
I pondered using my tunebelt from my nexus one and just getting a different silicone case but with the phone being as big as it is and 12 grams heavier that it may be a little too flimsy and flopping around for my liking...
I want something with the form factor that the amazon armbands or miCoach has where the phone fits into a sleeve and wont flop around... assuming the phone does not stick out literally an inch and the phone will stay in when I am jogging or doing plyometrics, i will be happy with my purchase...
full review to come when i get it...
Thanks looking forward to the review.
Sent from my LG-P999 using XDA Premium App
kev0153 said:
looking for an armband as well. All I saw were those few amazon entries and one bad review that said the phone sticks up above the cover. I might go to target and try a bunch for the iphone.
Click to expand...
Click to collapse
yup... looking for a perfect fit one too.
Try sports authority
shopcity said:
Try sports authority
Click to expand...
Click to collapse
I dont have sports authority and ****'s said they only carry ipod accessories, specifically nano armbands... its more of a bestbuy type of store's job to carry smartphone sports armbands since they actually sell the devices... ipods are a little more universal so ****'s carrys them...
kev0153 said:
looking for an armband as well. All I saw were those few amazon entries and one bad review that said the phone sticks up above the cover. I might go to target and try a bunch for the iphone.
Click to expand...
Click to collapse
I have the exact same problem the only armband that I found on Amazon supposedly sucks doesn't even fits the entire phone
I'm subscribing to this thread hopefully I'll find something nice
JHaste said:
Well I am going to take one for the team, I ordered the one that amazon has listed with the ONE bad review... for 17 bux shipped so its whatever...
i went to best buy today and opened a bunch of boxes of stuff and nothing seemed to really fit... i tried the miCoach for the IP4 and it was a huge fail
I pondered using my tunebelt from my nexus one and just getting a different silicone case but with the phone being as big as it is and 12 grams heavier that it may be a little too flimsy and flopping around for my liking...
I want something with the form factor that the amazon armbands or miCoach has where the phone fits into a sleeve and wont flop around... assuming the phone does not stick out literally an inch and the phone will stay in when I am jogging or doing plyometrics, i will be happy with my purchase...
full review to come when i get it...
Click to expand...
Click to collapse
What case do you have?
I want to have a good case that hopefully also fits in a good armband
Let me know if you find a good combination please I'd appreciate it
Here is a list of armbands I found on Amazon, I think the only solution would be to buy a an armband not designed specifically for the G2X and see which one adapts the best
http://www.amazon.com/gp/search/ref=sr_nr_i_1?rh=k%3Acell+phone+armband%2Ci%3Amobile&keywords=cell+phone+armband&ie=UTF8&qid=1306020133
http://www.amazon.com/iArmbands-Arm..._1_7?s=wireless&ie=UTF8&qid=1306060005&sr=1-7
Found this one: http://www.amazon.com/Elegant-Armba..._14?s=wireless&ie=UTF8&qid=1306075830&sr=1-14
Zspy1985 said:
http://www.amazon.com/iArmbands-Arm..._1_7?s=wireless&ie=UTF8&qid=1306060005&sr=1-7
Click to expand...
Click to collapse
the band is too thin, that phone would flap all over the place with a phone our size... bands with a sleeve are better in terms of comfort and stability
omarsalmin said:
Found this one: http://www.amazon.com/Elegant-Armba..._14?s=wireless&ie=UTF8&qid=1306075830&sr=1-14
Click to expand...
Click to collapse
yea that is the one i ordered that got the couple of bad reviews...
I just got it in the mail yesterday but I was not home to use it, I will take it out for jog tonight and do a full review with some pictures
JHaste said:
the band is too thin, that phone would flap all over the place with a phone our size... bands with a sleeve are better in terms of comfort and stability
yea that is the one i ordered that got the couple of bad reviews...
I just got it in the mail yesterday but I was not home to use it, I will take it out for jog tonight and do a full review with some pictures
Click to expand...
Click to collapse
Thanks for your upcoming review I appreciate that
Ok so here is my review of the VanGoddy Armband for the G2x/O2X/EVO4g/Atrix/any other giant ass phone!
(Picture album is linked on the bottom of the post)
First off I would like to state what sort of view I am coming from as to eliminate any bias by stating my biases from the get go. I am a slim, athletic body type, 14 inch biceps, 6 foot, 160 pounds. I typically will be doing a lot of running with this device and I referee soccer and will often strap it on while I run a game so I can track my positioning, distance, ect. so I wanted a band that would not be too gaudy and I could hide a bit under my sleeves (underarmor and uniform sleeves). Since again running was my main use with some use in the gym I wanted stability while holding the device so it was not sliding around, flopping around or possibly flying out of the pocket. The other main feature I was looking for was material quality and anybody that works out knows neoprene is clutch especially for people who sweat a large amount, like myself, when I work out or go running. Tad bit of personal information for ya there!
The unboxing and first impressions: VanGoddy shipped it in a bubble wrap envelope, nothing fancy and the item did not need anything fancy. Right away when I looked the thing over I could tell that the pocket to hold the phone looked a tad large for my phone and that the plastic screen was cheap and small. Just putting the armband on, I put it on as tight as I could get the velcro to go and it was a perfect fit, very snug and even tighter when I flexed how my arms would be while running.
Upon slotting the phone in I noticed two things, the clear screen cover does in fact suck, and the phone will fall out of the slot naturally. The device was definitely made with a "universally wide" pouch and I would argue favors the wider phones such as the Atrix, Evo4g and DX; our slim phones got the shaft in this design. I put the armband back on, tightened up, even loosened it a hair from where I had it last time and boom! it actually felt pretty good. Swinging my arm around the phone was pretty snug, I could not get it to fall out regardless of what I was doing which earned it some "do points" in the do or die ratings! I would clear this for use in the gym for bench pressing and doing other strange arm angle lift routines.
Onto the screen cover. This was my biggest grip with this thing. You do not get a lot of cover real estate to work with and the way the cover was stitched into the armband was absolutely thoughtless because it does not even come close to sitting flush with the screen. The part that is stitched around the screen on the outside is a flexible plastic and on the inside they overlapped material so that the screen is not sitting against the plastic cover screen. (See picture overlap flap) This caused another problem that annoyed me a little, if the phone shifted in the slot too much to one way or the other the edge of the phone would get caught on one of these flaps on the inside around the screen edge and offset the phone. It did this twice during my little 3 mile jog while I was trying to skip a song. Getting to the notifications bar while in the slot is damn near impossible, I had no trouble hitting the softkeys but the notification bar is inaccessible. This is partly due to the long "ass" our phones have so the top part of our screens will not be within the clear cover's viewing range.
I did and do not play with the phone much while running because I have very satisfying playlists. Handling touches through the screen was about on par with other covers of similar thickness. I did not really have a problem executing touch commands but changing the volume was a little weird since I had to essentially just squeeze and guess where the volume buttons were on the side. On the bright side, because the screen is not very tight to the screen and the neoprene resists water, I never noticed the screen to fog up on me.
All in all for $17 something cents shipped this is not a terrible armband by any means. It is no 30-40 dollar custom phone fitting armband but it is not so cheap that I just pitched it laughing at what I bought, I would say I got what I paid for and maybe a bit more. Score wise I would give this guy a 7/10. It is good but it definitely has some shortcomings. If you are skinny and dont have at least a 13inch bicep I would not recommend you purchase this device, for fear of it sliding off of your arm. Get used to running with this on your left arm, I found the cord positioning much better and it was getting tangled less around my arm.
Some things I would have liked to see and would be a more quality screen cover. A bit more velcro (one more inch) to possibly go tighter for maybe some more extreme sports or intense working out and for smaller biceps. A slot for a Key is always a nice addition but I usually find a place in whatever pair of shoes I have; sliding it behind the phone you would risk it flying out, I would bet money that it flies out on smaller biceps.
If you are looking for something to get the job done then this is the device for you because it does exactly that. It does not do it extremely well, wow, or impress me in any way but it for 17 bucks it served my needs. Again 7/10 from me...
Pictures: https://picasaweb.google.com/108804...?authkey=Gv1sRgCMyb25S03-aJDw&feat=directlink
Enjoy and Thanks for reading!
thanks for the great review. It sounds like this is the best one out there right now.
Just bought one, hopefully it will be sufficient. Just need it to keep the thing dry
swampthing1224 said:
Just bought one, hopefully it will be sufficient. Just need it to keep the thing dry
Click to expand...
Click to collapse
I dont think you will have any problem keeping it dry, just make sure nothing from your shoulder or upper arm drips down since the top is open
http://www.amazon.com/iGadgitz-Resi..._1_4?s=wireless&ie=UTF8&qid=1306182082&sr=1-4
found this one but it's out of stock. try emailing the seller?
Hey guys,
I'm looking for a TPU-style case for my HP Touchpad. Everywhere I look, the cases all have the front flap to protect the screen. This just seems to be a gigantic pain in the ass that I don't want to deal with.
Anyways, I have a rubber case for my EVO 3D. It's actually this Rocketfish case from Best Buy: http://goo.gl/oDOiG
Is there anything available like this for the TouchPad? I've been Googling and searching forums for forever and can't find one remotely close. Silicone cases are too stretchy and aren't glossy on the outside. This one has a rubber feel to it and is glossy, so it doesn't stick to everything.
Thanks for the help!
I've looked everywhere I could think of any haven't turned anything up. I've been using TPU cases on all my devices and prefer them over anything else so wanted the same for the TP. They don't seem very common for devices of this size to begin with though. Maybe an enterprising XDAr will step up. In the meantime I'm using the HP case which isn't bad at all.
given some time I'm sure they'll show....bear in mind this has only just become the most desired commodity....so the vendors need a sample to dish out the cases
this is what I'm after too really. Appears to be a real lack of anything decent in the UK at the moment Hopefully there'll be more released soon!
This might do, it's not exactly what you're looking for though.
http://www.ebay.co.uk/itm/New-Leath...K_iPad_Tablet_Accessories&hash=item415cc817ba
The front piece that you can see rotated pops off so you can leave the back/front flap sections behind and still securely hold the pad in the case.
http://forum.xda-developers.com/showthread.php?t=1245482
I've only seen a few rocketfish products so far and so far they seem like overpriced crap. Haven't seen they're cases though, how is it and how much was it?
I actually didn't want the HP case and my mother talked me into it. I'm so glad she did. The flap doubles as a stand, and two positions, one angled for typing easier and one standing up so you can watch stuff easier. Totally worth it imo.
I'm actually thinking about funding another HP case and just slicing off the flap and putting a screen protector in...would do for the near term. Honestly I haven't yet found a situation in a week and a half where the stand part was useful.
Sent from my MB860 using XDA App
Had the same problem, couldn't find anything suitable, ended up going for a slip case.
phobos512 said:
I'm actually thinking about funding another HP case and just slicing off the flap and putting a screen protector in...would do for the near term. Honestly I haven't yet found a situation in a week and a half where the stand part was useful.
Sent from my MB860 using XDA App
Click to expand...
Click to collapse
Really? At least for me I found that the lower position with the HP case is a perfect viewing angle for when I have the Touchpad in my lap. It also makes it much easier to type.
dirtyfingers said:
Really? At least for me I found that the lower position with the HP case is a perfect viewing angle for when I have the Touchpad in my lap. It also makes it much easier to type.
Click to expand...
Click to collapse
I tend to either sit with my knees up (I have a knee injury and until surgery in October I have my lt knee up a lot) or I hold the TP with both hands and type with my thumbs...in either case I have no use for the flap.
Unfortunately I tried yesterday to find another case but couldn't - did find more Touchstones but one of those is enough for me.
phobos512 said:
I'm actually thinking about funding another HP case and just slicing off the flap and putting a screen protector in...would do for the near term. Honestly I haven't yet found a situation in a week and a half where the stand part was useful.
Sent from my MB860 using XDA App
Click to expand...
Click to collapse
I actually ordered an official HP case and this is what I'll be doing with it... sigh.
I just ordered this ultra slim cover for my tf700 its slim and light, and not bulky it also has a stand for movie watching and for typing as well, i like how it covers the back and has all holes for the ports and speaker its a non branded cover that was shipped from hong kong took 2 weeks to get here, below i will post a link to the website I ordered and some pictures of the cover. price $15
http://www.ebay.com/itm/ASUS-Transf...es_Covers_Keyboard_Folios&hash=item35c43bb49b
looked really closely at that one, but went with the TPU Hard Gel instead. Post a review once you have used it a while and let us know what yoiu think of it.
Looks really good, thinking of a purchase. How's it lasted so far?
cover - check
slim - check
ultra - so so
smart - not even close
Ive had it for a couple days now and i like it, I like how now i don't have to worry about placing my tablet down on its back to avid scratches on the aluminum back, another thing i like is that it has a stand to watch netflix or anything else while im at the table, that was the only reason I used the keyboard dock now i wont have to attach and detach the keyboard dock all the time, another thing i like is that its slim and dose not make the tablet look bulky like some leather ones i see on ebay, I was also looking at the hard tpu case but chose this cover because of the stand.
Couple of questions:
How stable is it when it's set up in the movie-watching position?
How much protection/padding is does it offer (if any)? It looks very much like a clone of the Apple smart cover, so I'm guessing not a whole lot.
The anal retentive in me dislikes that fact that the Asus logo is upside down when it's in the typing position, but whatever!
I guess it's a toss up for me between this one (cheap, cheerful, slim, long shipping time) and this one:
http://www.amazon.com/gp/product/B008OHFT5W/ref=gno_cart_title_2?ie=UTF8&psc=1&smid=A1GC47N5J8F7IJ
(more expensive, not so slim (but better protection), two-day shipping).
TheCynick said:
Couple of questions:
How stable is it when it's set up in the movie-watching position?
How much protection/padding is does it offer (if any)? It looks very much like a clone of the Apple smart cover, so I'm guessing not a whole lot.
The anal retentive in me dislikes that fact that the Asus logo is upside down when it's in the typing position, but whatever!
I guess it's a toss up for me between this one (cheap, cheerful, slim, long shipping time) and this one:
http://www.amazon.com/gp/product/B008OHFT5W/ref=gno_cart_title_2?ie=UTF8&psc=1&smid=A1GC47N5J8F7IJ
(more expensive, not so slim (but better protection), two-day shipping).
Click to expand...
Click to collapse
its really stable i can type in the movie watching position without tipping over, that i did notice that when i type laying down the asus logo is up side down, but that's not a problem for me, i also looked at the case you have on the link, it looks nice its not that bulky and also works as a stand, only thing i didn't like was the mat sticks out in front of you when watching a movie, and that it dose not cover all around the edge just the corners, other then that seems like a good cover, and padding looks a lil thicker on both sides front and back. over all im happy with the slim cover it dose what i need, the long wait for it to arrive is what i hated,
Thanks for the feedback. I've gone ahead and ordered the Acase one, as I'll need something pronto and the tablet is due to arrive today. I may pick up one like yours later on...we'll see.
It looks pretty!
I'd be afraid to break wind near that with it standing, might blow over.
For anyone looking for a high quality stable folio case, I highly recommend the Targus Truss case! I bought mine at my local Best Buy for my Asus Prime for $40. It fits the Infinity perfect, as both tablets are nearly identical. The only thing is the volume rockers are trickier to get to, but it's not an issue at all, just throwing only way you can tell it isn't made specifically for the Infinity
Sent from my White Note 2 via XDA Premium HD
WebAngel said:
It looks pretty!
Click to expand...
Click to collapse
+1
I've been trying to find a good case since I got the tablet, but I haven't found anything that jumps out at me. They've either been too stiff or too flimsy. Most of them are designed so you can stand the tablet in landscape mode, which I don't want or need. I'd just like a nice case that doesn't have folds of creases for a stand, is thin and unobtrusive, and looks fairly nice. Any suggestions?
I was thinking of the official. book cover, but I know it folds for landscape. Is anyone with it able to tell me how flimsy the creases in it make it? One I got just flops all over the place since it has 3 creases for various angles. ? Thanks in advance for any help!
OEM case might just be the best on the market right now but it's definitely not worth its price for 60$.
It has been reportedly on sale for 50% off before so I would wait until then unless you can get your hands cheaper off of ebay or something.
If you do, let me know! I bought mine at retail price and as good as the quality may be, 60$ is like gold, ITS TOO MUCH FOR JUST A CASE. WHAT HAPPENED
sweetandsoursauce said:
OEM case might just be the best on the market right now but it's definitely not worth its price for 60$.
It has been reportedly on sale for 50% off before so I would wait until then unless you can get your hands cheaper off of ebay or something.
If you do, let me know! I bought mine at retail price and as good as the quality may be, 60$ is like gold, ITS TOO MUCH FOR JUST A CASE. WHAT HAPPENED
Click to expand...
Click to collapse
So I got the Book Cover off eBay for $35, which was the only way I'd be getting it. I really like the look and feel of it, but it has one annoying thing for me: The little flap that wraps around the right side. I use my tablet to read, a LOT, and when I hold it, that little flap jiggles a lot and it bothers me. I found a folio cover for like $7 that is exactly what I'm looking for, EXCEPT it's split into like 8 pieces to fold every conceivable way. I just want a cover that doesn't fold into pieces, and stops at the edge of the screen. Like if you were to stick the tablet inside a hardcover. Basically adding a hard shell over it that opens like a book. I am at a loss!
Samsung Galaxy Tab S 8.4 Case - Poetic
I have this for my Galaxy Tab S 10.5. Top quality case and certainly feels more expensive than $30-35 cases.
greycobalt said:
So I got the Book Cover off eBay for $35, which was the only way I'd be getting it. I really like the look and feel of it, but it has one annoying thing for me: The little flap that wraps around the right side. I use my tablet to read, a LOT, and when I hold it, that little flap jiggles a lot and it bothers me. I found a folio cover for like $7 that is exactly what I'm looking for, EXCEPT it's split into like 8 pieces to fold every conceivable way. I just want a cover that doesn't fold into pieces, and stops at the edge of the screen. Like if you were to stick the tablet inside a hardcover. Basically adding a hard shell over it that opens like a book. I am at a loss!
Click to expand...
Click to collapse
There are 2 OEM cases. I think you are looking for the "simple cover".
Sent from my SM-T700 using XDA Free mobile app
adibadi said:
There are 2 OEM cases. I think you are looking for the "simple cover".
Sent from my SM-T700 using XDA Free mobile app
Click to expand...
Click to collapse
I actually saw the simple cover, and while it does what I watch without a folding latch, it doesn't cover the back of the tablet, which I also want. :-/
What i'd really like is a simple shell like for a cell phone, the ones that just wrap around the sides but not the top or bottom. All I'm looking for really is to make the device a little thicker to make it easier to hold. Its too think and slippery.
Something like this for example...
http://www.ebay.com/itm/Black-S5-Ul...818?pt=LH_DefaultDomain_0&hash=item48662b114a
The device is already big, so I don't to make it even bigger with a case. Just a simple ultrathin shell.
So you want this:
http://www.ebay.com/itm/for-Samsung...131?pt=LH_DefaultDomain_0&hash=item58b6b0e05b
rp3 said:
So you want this:
http://www.ebay.com/itm/for-Samsung...131?pt=LH_DefaultDomain_0&hash=item58b6b0e05b
Click to expand...
Click to collapse
Looks pretty good. Out of stock but I will keep my eyes on this...
I have that one. It fits nicely, quality is ok, unobstrusive, price is excellent. But, in a way it combines several disadvantages. It ads bulk when using, still it doesn't protect corners sufficiently when carrying, screen remains unprotected, of course. Also it became to thick to fit my keyboard stand.
I think there used to be a thread on this, but I can't find it anymore. Here's my question:
I'm looking for a thin leather case for my S6. Not so much a wallet style case, sleeve, or one with a closure, just a protector for the back and sides of the device. My experience with PU or low-grade leather (<$20) isn't great, so I'm fine spending a little more money (>$50).
Ideally, it would be brown and available in the US. The options I've seen so far don't fit in with the color, price, or domestic availability. Any suggestions? If you're going to suggest these, I've already looked at them and they are a bust:
I'm an XDA noob, so I'm prevented from posting links, but I've looked at cases from Stilgut (can't order from Amazon US and potential returns to DE seem difficult), Sena (no back-only case for the S6), Vaja (not making a case for the S6), and Montblanc (if I'm gonna spend $110, I need one that is perfect, i.e., brown). None fit the bill.
Again, apologies if this is a duplicate thread. Any help/suggestions would be greatly appreciated.
Thanks!
P.S. As an aside, I'd consider a wooden case, but none of those (Carved, Toast, etc.) seem to be what I'm looking for either.
I'm interested in this as well.
The official Apple leather case for the iPhone is perfection for what I want. Unfortunately, that's one area that Samsung doesn't seem willing to take design queues from. I wouldn't mind paying 40/50 bucks if its THE only case id want/need.
lucas.scott said:
I'm interested in this as well.
The official Apple leather case for the iPhone is perfection for what I want. Unfortunately, that's one area that Samsung doesn't seem willing to take design queues from. I wouldn't mind paying 40/50 bucks if its THE only case id want/need.
Click to expand...
Click to collapse
Currently choosing between Galaxy S6 and iPhone 6. As silly as it might sound, a good leather (shell) case is one of my highest priorities.
I broke 3 iPhone 5's until I put the official leather case on it (I always disliked plasticky cases).
It added more grip, and just enough protection from average falls.
Ridiculous really. Choosing a $1000 piece of tech based on a $50 accessory. But that's just how it is.
Hopefully someone knows of something.
They haven't announced the S6 case yet but I have always been happy with with Vajacases - if you are willing to drop some extra cash. Here's one of the options for the S5: http://www.vajacases.com/galaxy-s5-leather-cases/premium-leather-grip
Edit: I see you mentioned Vaja is not making an S6 case. What is your source? It usually takes them a few months before the new models are ready.
There actually was a thread on this subject until recently, but when trying to find it now, I just realized it has inexplicably been deleted. Had a few good examples in it, but they're obviously not reachable now. I'll post the link here below in case the thread turns up again.
http://forum.xda-developers.com/galaxy-s6/accessories/simple-leather-wallet-case-t3095597/
sankyou said:
They haven't announced the S6 case yet but I have always been happy with with Vajacases - if you are willing to drop some extra cash. Here's one of the options for the S5: {link removed because I'm new and can't have links in any of my posts}
Edit: I see you mentioned Vaja is not making an S6 case. What is your source? It usually takes them a few months before the new models are ready.
Click to expand...
Click to collapse
I contacted Vaja through their website back in April and they told me that it was under development. When I checked in last week, they said that a case for the S6 "is not currently being planned for production. We planned to develop a line in the past but I am afraid right now the project has been cancelled."
Whether that means it may show up later, who knows, but for now we're out of luck. Boo.
Yeah, no clue either why the other thread disappeared. It led me to a couple of versions of Apple-esque leather Galaxy S6 cases on eBay.
This one without a plastic fill in the camera/HRM cutout is the one that I already bought in dark blue for my black S6. In short:
Top and bottom are left uncovered
Fit is pretty good, no looseness anywhere really
The power + volume down buttons are both properly clicky
The volume up is pretty mushy, but not too bad
No interference with headphone jack or bottom USB port
The width of the case means that the camera module no longer touches the surface when laid on its back
It does NOT, however, appear to have any lift on the front so your screen will touch the surface when laid facedown
The last item was probably so that swiping in from the edge of the screen is still quite comfortable
Overall I'm pleased enough with the quality and feel of the PU leather cases that I might end up also trying out this slightly different version with plastic fill for the camera/HRM cutout . I'm not sure if it's unclear photos but it looks like this version has full coverage around at least the top of the bottom?
Anyhow, the one that I have feels a lot like the Apple Leather case I've tried out on iPhone 6, which is exactly what I was looking for.
sosquidtaste said:
Yeah, no clue either why the other thread disappeared. It led me to a couple of versions of Apple-esque leather Galaxy S6 cases on eBay.
This one without a plastic fill in the camera/HRM cutout is the one that I already bought in dark blue for my black S6. In short:
Top and bottom are left uncovered
Fit is pretty good, no looseness anywhere really
The power + volume down buttons are both properly clicky
The volume up is pretty mushy, but not too bad
No interference with headphone jack or bottom USB port
The width of the case means that the camera module no longer touches the surface when laid on its back
It does NOT, however, appear to have any lift on the front so your screen will touch the surface when laid facedown
The last item was probably so that swiping in from the edge of the screen is still quite comfortable
Overall I'm pleased enough with the quality and feel of the PU leather cases that I might end up also trying out this slightly different version with plastic fill for the camera/HRM cutout . I'm not sure if it's unclear photos but it looks like this version has full coverage around at least the top of the bottom?
Anyhow, the one that I have feels a lot like the Apple Leather case I've tried out on iPhone 6, which is exactly what I was looking for.
Click to expand...
Click to collapse
Wow, thank you so much. The "more expensive one" is exactly what I am looking for. No cutouts on the side or anything. Looks perfect. Out of curiosity, how long did shipping take? I have the worst luck with that kind of thing, and it looks like it ships out of China.
Also, since you have the dark blue/black S6, can you throw up a few images for me?
I just ordered one of each... hopefully they arrive before S7....
Looks like one of these would work. Thanks for the tip.
lucas.scott said:
Wow, thank you so much. The "more expensive one" is exactly what I am looking for. No cutouts on the side or anything. Looks perfect. Out of curiosity, how long did shipping take? I have the worst luck with that kind of thing, and it looks like it ships out of China.
Also, since you have the dark blue/black S6, can you throw up a few images for me?
I just ordered one of each... hopefully they arrive before S7....
Click to expand...
Click to collapse
Yeah, the buttons on the second cases I linked in my post look like they'll have better buttons. On mine it's like... slits on each end of the button section.
Shipping was surprisingly fast for me. I think I wanted like... just under two weeks? I was quoted a shipment time like 30+ days from purchase (which is insane), so I was pleasantly surprised when it showed up in normal China --> US shipment time.
If I can get a few minutes to myself at home tonight I'll try and snap a few choice pics of the dark blue on my black S6.
Though it's not without its tradeoffs, I think you'll be more than pleased with your order
sosquidtaste said:
Yeah, the buttons on the second cases I linked in my post look like they'll have better buttons. On mine it's like... slits on each end of the button section.
Shipping was surprisingly fast for me. I think I wanted like... just under two weeks? I was quoted a shipment time like 30+ days from purchase (which is insane), so I was pleasantly surprised when it showed up in normal China --> US shipment time.
If I can get a few minutes to myself at home tonight I'll try and snap a few choice pics of the dark blue on my black S6.
Though it's not without its tradeoffs, I think you'll be more than pleased with your order
Click to expand...
Click to collapse
Awesome man - thanks for the info!
Much appreciated on the pics!
ronnotronald said:
I think there used to be a thread on this, but I can't find it anymore. Here's my question:
I'm looking for a thin leather case for my S6. Not so much a wallet style case, sleeve, or one with a closure, just a protector for the back and sides of the device. My experience with PU or low-grade leather (<$20) isn't great, so I'm fine spending a little more money (>$50).
Ideally, it would be brown and available in the US. The options I've seen so far don't fit in with the color, price, or domestic availability. Any suggestions? If you're going to suggest these, I've already looked at them and they are a bust:
I'm an XDA noob, so I'm prevented from posting links, but I've looked at cases from Stilgut (can't order from Amazon US and potential returns to DE seem difficult), Sena (no back-only case for the S6), Vaja (not making a case for the S6), and Montblanc (if I'm gonna spend $110, I need one that is perfect, i.e., brown). None fit the bill.
Again, apologies if this is a duplicate thread. Any help/suggestions would be greatly appreciated.
Thanks!
P.S. As an aside, I'd consider a wooden case, but none of those (Carved, Toast, etc.) seem to be what I'm looking for either.
Click to expand...
Click to collapse
lucas.scott said:
I'm interested in this as well.
The official Apple leather case for the iPhone is perfection for what I want. Unfortunately, that's one area that Samsung doesn't seem willing to take design queues from. I wouldn't mind paying 40/50 bucks if its THE only case id want/need.
Click to expand...
Click to collapse
I found a high end solution for you guys as well. Reviews on Bouletta from the Sony forums talk about them being some of the highest quality leather cases on the market.
BLACK: http://www.bouletta.com/index.php?i...xy_s6_ultimate_jacket_other_models-uj_rbt1_s6
BROWN: http://www.bouletta.com/index.php?i...xy_s6_ultimate_jacket_other_models-uj_rbt5_s6
Looks nice, but having the cut outs on the side just make it feel cheap to me...Even if it's of the highest quality
lucas.scott said:
Looks nice, but having the cut outs on the side just make it feel cheap to me...Even if it's of the highest quality
Click to expand...
Click to collapse
I know exactly what you mean. Originally I wanted an Xperia Z3, but there are literally no cases available without massive side cut-outs. The Z3 one is borderline ridiculous: http://www.bouletta.com/index.php?id_product=103&controller=product
The Galaxy S6 one isn't too bad. Not as good as the standard Apple one though unfortunately =\
I have the second case linked from ebay earlier. It is nowhere near leather feeling. I would say it feels more like a smoothed out velvet than anything. Also, the case does not really offer any protection for the front. It might stick out 1mm past the screen. Overall it is an okay case for the price, but if anyone wants a "leather" feel to a case, this is not the one for you. The buttons are not that great either. You lose most of the tactility from the keys with the case. I imagine over time they will break in and feel better, but after a week of use it doesn't feel great, but doesn't feel as bad as it did at first.
chinesefood said:
I found a high end solution for you guys as well. Reviews on Bouletta from the Sony forums talk about them being some of the highest quality leather cases on the market.
BLACK: no links for me
BROWN: no links for me
Click to expand...
Click to collapse
Am I missing something? I can't seem to find a price/how to buy? Is it a non-US site?. Also, the brown case looks grayish, no? (I'm legit color blind though, so that could just be my broken eyes)
Hey that bouletta case looks really nice. However, is the thickness of the back of the case enough so that the camera doesn't touch the surface the phone is placed on? I've seen many posts of people saying how they cracked the camera lenses after just putting the s6 on its back like on a table or something similar.
Thanks
ronnotronald said:
Am I missing something? I can't seem to find a price/how to buy? Is it a non-US site?. Also, the brown case looks grayish, no? (I'm legit color blind though, so that could just be my broken eyes)
Click to expand...
Click to collapse
You're right. I've sent them an email to find out.
ARRIVED!!
This one came in today : http://www.ebay.com/itm/Luxury-Orig...Domain_0&var=570673785727&hash=item3f4af29e66
Gotta say... i'm insanely impressed. I can't imagine getting much closer to the official Apple Leather case than this. Sure, there is virtually no drop protection, but that's not what I'm into. Just need to keep it scratch free and get that camera bump evened out. I have attached some pics.
Biggest problem for most people will be lack of lip around the screen. It's pretty much flush with the aluminum on the device. I actually prefer that since I never ever place my device face down... so i'm able to still feel the slight curve to the glass.
The buttons are a little stiff right now - but I'm going to chalk that up to material. It'd be awesome if they wear in over time, but not a big deal if they don't. I'm thrilled with this thing for 8 bucks... could easily sell for 30 in US retail stores.
I also got the 5 dollar version and it's not nearly as nice. That two dollars makes all the difference in the world apparently.
lucas.scott said:
This one came in today : http://www.ebay.com/itm/Luxury-Orig...Domain_0&var=570673785727&hash=item3f4af29e66
Gotta say... i'm insanely impressed. I can't imagine getting much closer to the official Apple Leather case than this. Sure, there is virtually no drop protection, but that's not what I'm into. Just need to keep it scratch free and get that camera bump evened out. I have attached some pics.
Biggest problem for most people will be lack of lip around the screen. It's pretty much flush with the aluminum on the device. I actually prefer that since I never ever place my device face down... so i'm able to still feel the slight curve to the glass.
The buttons are a little stiff right now - but I'm going to chalk that up to material. It'd be awesome if they wear in over time, but not a big deal if they don't. I'm thrilled with this thing for 8 bucks... could easily sell for 30 in US retail stores.
I also got the 5 dollar version and it's not nearly as nice. That two dollars makes all the difference in the world apparently.
Click to expand...
Click to collapse
Thanks for the pictures. It looks to be a little off around the bottom of the phone. Is it just the angle of the picture or is that the case?
I had purchased something like this for an iPhone 6 plus that I had and it just slightly didn't fit the phone. The cut out for the camera was off were it wouldn't sit flush with the back of the phone. I ended up just biting the bullet and paying the 50 odd bucks for the apple one. It would be nice if there was a decent quality real leather option, even if the price was higher. I guess we'll just have to wait and see. Again thanks for the picture.