Related
So I flashed the unofficial cm7 build from the dev forum meaning I now have blue Cwm instead of red that I used with s7. What steps are required to reflash s7? Do ihave to use sgs kernel app to reflash kernel then flash s7?
Also I'm having issues restoring apps with titanium. The "stock" app installation screen doesn't allow me to choose install, only cancel. Does this issue stem from not having done a factory data wipe? The thread I read only mentioned to format the system disk but I don't think it was written from the perspective of having come from s7.
Mad props for any help
Sent from my SGH-I997 using XDA App
Yes you will eventually have to use SGS to flash a kernel. Maybe this is the long way around but when I flashed back from cm7 yesterday I used sgs kernel flasher and followed the instructions for infused gb. When I flashed the kernel it got stuck converting partitions to ext4 (probably because they were already in ext4). But I did a battery pull in the middle and was back in red cwm. After that I flashed infused again without hassle with infusion core b. That being said, as long as you have red cwm, you should theoretically be able to flash whatever rom you want.
So in short : just follow the FULL instructions to flash infused v2. Then flash s7. Hope this helps
Sent from my SGH-I997 using XDA App
Thaanks! Will try this if my reflash of cm7 doesn't fix issues....do you think my app install problems are stemming from a previous install?
Sent from my SGH-I997 using XDA App
Hmmm...well out of habit I always personally makes sure I format everything, wipe the dalvik cache, fix permissions and wipe the cache partition as well. A lot of the devs stress that this is necessary so I wouldn't doubt that your app install problems are from a previous install. Something tells me, and someone please correct me if I'm wrong, that when you are going from a voodoo enabled ROM like infused or s7 to a ROM like cm7 that doesn't use voodoo lagfix, you will have issues with trying to get your apps back because they were using a different (but still similar since they are both EXT4) file system. This is just my guess. If anyone could elaborate more on this please do.
I would highly suggest flashing back to stock if you still experience issues or even ultimate unbrick so that way you can get a clean slate. Maybe try using apps2sd. I own it and can verify that it works well. Many others have also praised it. Good luck!
stratatak7 said:
Hmmm...well out of habit I always personally makes sure I format everything, wipe the dalvik cache, fix permissions and wipe the cache partition as well. A lot of the devs stress that this is necessary so I wouldn't doubt that your app install problems are from a previous install. Something tells me, and someone please correct me if I'm wrong, that when you are going from a voodoo enabled ROM like infused or s7 to a ROM like cm7 that doesn't use voodoo lagfix, you will have issues with trying to get your apps back because they were using a different (but still similar since they are both EXT4) file system. This is just my guess. If anyone could elaborate more on this please do.
I would highly suggest flashing back to stock if you still experience issues or even ultimate unbrick so that way you can get a clean slate. Maybe try using apps2sd. I own it and can verify that it works well. Many others have also praised it. Good luck!
Click to expand...
Click to collapse
i went and did another install of cm7 before i ultimate unbrick back to stock. i figure out the app install problem; unknown sources wasn't checked...very noob. but the promt at the beginning of titanium caught me off guard and i cancelled before i could read it.
i, too, noticed that my app icons were intact on my desktop after the s7 to cm7 flash but most (if not all) those that did not require root would force close upon opening. reinstalling the app worked, but i had to get them from the market at the time as my unknown sources box was unchecked. also, i've noticed that widgets do not reload after reboot.
one more thing, after the second flash of cm7, i noticed that flashing gapps only provided me with the market. others such as email and talk were available for dl thru the market but weren't loaded from the gapps flash. i tried multiple times to no avail.
i'm about to ultimate unbrick and reflash cm7 from stock. one more last thing, i'm fairly comfortable with red cwm but have only encountered blue with cm7...how do i wipe the dalvik cache?
thanks for the help!
albee320 said:
i'm about to ultimate unbrick and reflash cm7 from stock. one more last thing, i'm fairly comfortable with red cwm but have only encountered blue with cm7...how do i wipe the dalvik cache?
thanks for the help!
Click to expand...
Click to collapse
When using TiBu, make sure and restore apps using the "restore all apps with data" option, just did it coming from S7 to MIUI and worked fine.
As far as Gapps go, I downloaded them from the Cm7 wiki and installed them manually from blue CWM just to make sure everything was added and it worked for me.
Dalvik is in advanced just like red CWM, just a different color.
xIC-MACIx said:
When using TiBu, make sure and restore apps using the "restore all apps with data" option, just did it coming from S7 to MIUI and worked fine.
As far as Gapps go, I downloaded them from the Cm7 wiki and installed them manually from blue CWM just to make sure everything was added and it worked for me.
Dalvik is in advanced just like red CWM, just a different color.
Click to expand...
Click to collapse
I've always heard it is a huge no-no to restore all apps with data.
EricNagel said:
I've always heard it is a huge no-no to restore all apps with data.
Click to expand...
Click to collapse
restoringing all USER apps with data is okay but dont include SYSTEM apps with data
EricNagel said:
I've always heard it is a huge no-no to restore all apps with data.
Click to expand...
Click to collapse
the "system data" is the no no, and "restore missing apps" is the preferred option, but I've always avoided system data and have been fine everytime I restore.
So I finally got my wife to trust me the other night and went for it. All I did was install clockwork mod then root by installing Imoseyon's v.4.0 Kernel. This allowed me to keep all her data and use the voodoo lagfix as it has helped a few other friends phones that I have rooted.All was well till the following day when she complained her phone froze several times and needed a battery pull to restart. So being the compulsive person I am I had her go into voodoo control and uncheck the enable lagfix box. Once restarted she was unable to open any app that was on the SD card. They were just grayed out as if they werent even there. Now she is very unhappy.
I have tried to access the backup I created in CWM before i messed with anything. I get an error. Next I tried flashing the recovery files found here on XDA. Then restore back up. Still an error. So now i have flashe Tweakstock which works but she wants the phone back to stock. I tinker with my phones and friends phones constantly and can usually figure things out when they go wrong but I am really lost here. Any and all help is greatly appriciated.
This is the link for the root method I used: http://www.chargeforums.com/forum/droid-charge-hacking-guides/1264-how-root-your-droid-charge.html
snowride20 said:
So I finally got my wife to trust me the other night and went for it. All I did was install clockwork mod then root by installing Imoseyon's v.4.0 Kernel. This allowed me to keep all her data and use the voodoo lagfix as it has helped a few other friends phones that I have rooted.All was well till the following day when she complained her phone froze several times and needed a battery pull to restart. So being the compulsive person I am I had her go into voodoo control and uncheck the enable lagfix box. Once restarted she was unable to open any app that was on the SD card. They were just grayed out as if they werent even there. Now she is very unhappy.
I have tried to access the backup I created in CWM before i messed with anything. I get an error. Next I tried flashing the recovery files found here on XDA. Then restore back up. Still an error. So now i have flashe Tweakstock which works but she wants the phone back to stock. I tinker with my phones and friends phones constantly and can usually figure things out when they go wrong but I am really lost here. Any and all help is greatly appriciated.
This is the link for the root method I used: http://www.chargeforums.com/forum/droid-charge-hacking-guides/1264-how-root-your-droid-charge.html
Click to expand...
Click to collapse
Which version of CWM did you use?
5.0.2.7 I think, its blue and has a dancing banana in the backround.
In cwm, go to backup/restore, advance, and just restore data
Yes I've had bad luck with that version of cwm. I would try first using the 0817 cwm release to restore the backup. If that doesn't work, i would extract the tar files using 7zip or something similar on your pc, grabbing the files you need, and pushing them back to the proper locations.
Sent from my SCH-I510 using Tapatalk
buhohitr said:
In cwm, go to backup/restore, advance, and just restore data
Click to expand...
Click to collapse
That would fail for the same reason.
Sent from my SCH-I510 using Tapatalk
nismology said:
Yes I've had bad luck with that version of cwm. I would try first using the 0817 cwm release to restore the backup. If that doesn't work, i would extract the tar files using 7zip or something similar on your pc, grabbing the files you need, and pushing them back to the proper locations.
Sent from my SCH-I510 using Tapatalk
Click to expand...
Click to collapse
Intall in PDA, right? Nothing else with it and while on TweakStock ROM? She will be home in about an hour with her phone. Ill let you know how it goes.
Agree on 0817 CWM
I have to agree I had no luck trying to use CMW 5, I tried it several times with the same results. CWM 0817 worked perfect and have used it multiple times.
snowride20 said:
Intall in PDA, right? Nothing else with it and while on TweakStock ROM? She will be home in about an hour with her phone. Ill let you know how it goes.
Click to expand...
Click to collapse
Correct. Place it in PDA and flash it.
It can be found here: http://rootzwiki.com/topic/189-recoveryclockwork-mod-recovery/
Sent from my SCH-I510 using Tapatalk
So i flashed the 0817 version of CWM. All is well but it still wont restore. I have double checked and everything is in the clockwork folder on the sd card. How do I manually flash them using ODIN? Is this even possible?
So i will be a little more clear with what files I have in the backup folder. There is:
.android_secure.vfat
boot.img
cache.rfs
data.rfs
datadata.rfs
nandroid.md5
recovery.img
system.rfs
snowride20 said:
So i flashed the 0817 version of CWM. All is well but it still wont restore. I have double checked and everything is in the clockwork folder on the sd card. How do I manually flash them using ODIN? Is this even possible?
Click to expand...
Click to collapse
Have you try to restore just data? Make sure you mount all your /data before try it. when you select restore did you see your old backup? Also what sms app you used, stock?
buhohitr said:
Have you try to restore just data? Make sure you mount all your /data before try it. when you select restore did you see your old backup? Also what sms app you used, stock?
Click to expand...
Click to collapse
Didnt work. I do see my old backup and stock sms.
First of all, which cwm did you make your backup in? If it was orange then you have to restore with orange cwm. If it was blue then make sure you have the newest version of it. The older ones had problems with restores.
If it doesn't work then you might be out of luck. Maybe you had the old blue cwm and the underlying problem was that it made bad backups but restored good backups fine? I don't really know then.
I have had zero problems with the newest cwm by the way.
Sent from my pocket-sized, Linux-based computer using electromagnetic radiation... and Tapatalk.
Well thanks everyone. I think im just out of luck. I went back to stock using the directions at the top of the Charge development section and now when I sign into the market on my computer to push some apps to the phone, it doesnt recognize it. Any clue here?
can you download apps from the market from your phone? If not try boot into cwm and do the following:
1. mount /system, /data etc.. all of them. Once done they should all displayed unmount in front of all.
2. wipe factory/data, cache, davik cache.
4. reboot and sign in with google account then try to download from the market.
To sort of finish the CWM question, CWM 4.X and CWM 5.X do backups differently. Thats why there are problems with restoring with the wrong one.
With that said, sometimes backups don't work.
Also, you flashed the wrong kernel. Imo4.0 is made for EP4P, not the current OTA for the charge, which is EP4D. Imnuts 0130 PBJ Kernel is the only one made for the Gingerbread OTA.
buhohitr said:
can you download apps from the market from your phone? If not try boot into cwm and do the following:
1. mount /system, /data etc.. all of them. Once done they should all displayed unmount in front of all.
2. wipe factory/data, cache, davik cache.
4. reboot and sign in with google account then try to download from the market.
Click to expand...
Click to collapse
I can get to it from the phone and im already back to stock. Just when I log on from my desktop it says there is no android phone attached to the account or something like that.
MidnightNinja said:
To sort of finish the CWM question, CWM 4.X and CWM 5.X do backups differently. Thats why there are problems with restoring with the wrong one.
With that said, sometimes backups don't work.
Also, you flashed the wrong kernel. Imo4.0 is made for EP4P, not the current OTA for the charge, which is EP4D. Imnuts 0130 PBJ Kernel is the only one made for the Gingerbread OTA.
Click to expand...
Click to collapse
Thanks ninja I just wish I had that info about an hour ago. The way I read it I was good with Imo4. Guess I should stick to messing with my Rezound.
Sent from my ADR6425LVW using XDA App
I don't have any problems with imo 4 except bass boost in voodoo sound. I am on ep4d stock deodexed. ep4d and ep4p are nearly identical...
I can backup and restore on orange cwm perfectly.
You might as well take the opportunity to trick out her phone. Besides, what are u gonna lose besides text messages?
Sent from my SCH-I510 using XDA App
Hi Everyone,
So recently YouTube updated to version 2.4.4, and apparently, videos launch with considerable lag that locks up the device. I've tried every rom with every kernel and they all behave the same. Maybe Titanium Backup? But it worked before...
1. Anybody else getting this?
2. Any solutions?
Wait I just installed RolleTube (version 2.1.6) and it still lags. Now I'm seriously wondering what's wrong.
something is wrong on a system level. try a fix permissions in cwm
icenight89 said:
something is wrong on a system level. try a fix permissions in cwm
Click to expand...
Click to collapse
Well, the even weirder thing is that when I just install a ROM, TiBu, and run youtube, there's no lags. Then when I reboot (because of battery or something), the lag reappears. Fix Permissions seems to be locking up in the middle of the process, and I have to hard shutoff to get the device back working. Funny thing is that youtube worked fine like a month ago...
eliwu26 said:
Well, the even weirder thing is that when I just install a ROM, TiBu, and run youtube, there's no lags. Then when I reboot (because of battery or something), the lag reappears. Fix Permissions seems to be locking up in the middle of the process, and I have to hard shutoff to get the device back working. Funny thing is that youtube worked fine like a month ago...
Click to expand...
Click to collapse
I would wipe everything and start fresh
Sent from SKYROCKET
NexusMod 4.0
Romracer 0.3
xcrazydx said:
I would wipe everything and start fresh
Sent from SKYROCKET
NexusMod 4.0
Romracer 0.3
Click to expand...
Click to collapse
Did that already... Even wiped my internal 16gb. Darkside wipe, fix permission, etc. etc. didn't work - still there.
Also: it seems Go Launcher also has some problems with YouTube's lag... the widget on Go Launcher lags to launch the video on the widget, while twlauncher doesn't have that (as much). Still has crazy device-locking lags though.
EDIT: Oh wow... it seems when I connect my phone to my PC it shows up as a corrupted disk... Windows is asking me if I want to fix the disk. Would that be the problem? And if it is, can I let Windows fix the disk?
I don't think I would let windows do that. It says corrupted or needs formatted?
Sent from SKYROCKET
NexusMod 4.0
Romracer 0.3
Ok. Boot into odin and reflash cwm 5.0.2.6. Boot into cwm and format system, then data, the cache and dalvik cache. Repeat 3x. Flash stock through odin. Reboot, twice. Now reflash cwm and then flaah a rom and configure. I don't care what your problem is, that method is a guarantee fix lol
icenight89 said:
Ok. Boot into odin and reflash cwm 5.0.2.6. Boot into cwm and format system, then data, the cache and dalvik cache. Repeat 3x. Flash stock through odin. Reboot, twice. Now reflash cwm and then flaah a rom and configure. I don't care what your problem is, that method is a guarantee fix lol
Click to expand...
Click to collapse
I did this, and I still had lag after restoring TiBu. Lol the look on my face when it happened
But turns out, the TiBu backup of Go Launcher was actually screwing many apps up (including YouTube)... dunno if it was a system issue, but it was the problem. Transitioned to ADW after a full wipe again (without ever launching go launcher) and all was good. Thanks guys.
eliwu26 said:
I did this, and I still had lag after restoring TiBu. Lol the look on my face when it happened
But turns out, the TiBu backup of Go Launcher was actually screwing many apps up (including YouTube)... dunno if it was a system issue, but it was the problem. Transitioned to ADW after a full wipe again (without ever launching go launcher) and all was good. Thanks guys.
Click to expand...
Click to collapse
Don't restore stuff across roms with TiBu. I only use it as a reference of the apps I had. So I always have a clean slate
xcrazydx said:
Don't restore stuff across roms with TiBu. I only use it as a reference of the apps I had. So I always have a clean slate
Click to expand...
Click to collapse
glad u got it sorted. And while I agree with xcrazydx thay starting clean is best, I have too many apps and not enough time, so thag metgod is impractical. I've never had this ssort of problem though to be honest
So I left Apple, came to Android, rooted my VZW GS3. First time I've ever done anything like this, so I'm new to it. I backed up EVERYTHING using TiBu, did the IMEI backup, Full system/image backup using CWM, unlocked bootloader, etc. Then I flashed to Synergy r46 (august 20th - yesterday's release).
Now I'm at work and my back-up pulled my contacts via Verizon's server, but how do I get back EVERYTHING else? SMS/MMS logs, call logs, apps, app data, etc? Do I need to download TiBu again (fresh from google market) and then load my backups off my Ext-SD card, or what? I guess I'm a bit confused as to where my TiBu items were even stored/saved...I assume it was the ExtSD card, otherwise I would have lost them all upon flashing to Synergy, correct?
Any help to get all my apps and data back on my newly Synergized phone would be awesome!!!! Thanks in advance!!!
Yes download titanium and then point it to the directory you had your back ups saved to (its sd card by default, and which is your phone storage btw) then tab to backup/restore click the check, then once your app data populates, and select run next to restore apps and data.
Sent from my SCH-I535 using Tapatalk 2
---------- Post added at 02:56 PM ---------- Previous post was at 02:55 PM ----------
And no flashing roms will not wipe all your user data unless you do a complete wipe.
Sent from my SCH-I535 using Tapatalk 2
I used titanuium backup pro to back up all my Apps and system data. And when I flash a new rom I just redownload titanium pro and it automatically restores all my Apps and system data. It is the easiest app I have used. So to answer ur question.....back up ur apps with titanium then after flashing a new rom go and redownload titanium and restore your system data and apps or just apps alone if that's what u prefer? Does that answer ur question or would u like more detailed instructions?
Sent from my SCH-I535 using xda app-developers app
Welcome to android!
Sent from my SCH-I535 using Tapatalk 2
Another very nice feature of Titanium Backup is its ability to pull data from CWM nandroids. There have been a few times where I was quick to flash a new rom without doing a backup of my apps. This has saved me much time from having to re-flash the nandroid backup, backup via TB, then re-flash to the new rom.
voodoomanx said:
And no flashing roms will not wipe all your user data unless you do a complete wipe.
Click to expand...
Click to collapse
This is one thing that scares me...I don't quite understand what's being wiped or how to perform a full wipe. I hope I don't do this on accident on day...When I flashed the ROM, I basically booted into CWM recovery and installed from there....I was unable to install by opening the ROMs ZIP file via ROM Manager. When I tried to install this way, it failed.
Can somebody confirm if I flashed correctly, just to put my worries to rest? Here's how I did it...
I backed everything up, unlocked bootloader, and tried to install Synergy r46 via ROM manager, but I had problem. I had the ZIP for the ROM downloaded to my Ext-SD card, like the installation instructions say. I then opened ROM Manager and went to "install ROM from SD card." The phone rebooted and opened in CWM to install...But kept having problems finding some "path" or something.
So I decide to wing it and rebooted into CWM. I cleared davik cache(sp?), then user data, then navigated to my Ext-SD and selected the ROM ZIP to install. Now, everything seems fine and it says it installed successfully, but I still think I installed in a way that wasn't described.
Is this a legit install and is this how most people flash ROMs, from booting directly into CWM, or should ROM manager have worked for me via "install ROM from SD card???" If so, why didn't ROM Manager work for me?
Rather urgent question: When I restore my items, do I want to click "RESTORE MISSING APPS + ALL SYSTEM DATA?" ill this restore the bloatware that was on my phone prior to flashing????? If so, is there any way around it
Thanks a bunch! Just waiting on an answer to the later questions before I restore.
Weioo said:
This is one thing that scares me...I don't quite understand what's being wiped or how to perform a full wipe. I hope I don't do this on accident on day...When I flashed the ROM, I basically booted into CWM recovery and installed from there....I was unable to install by opening the ROMs ZIP file via ROM Manager. When I tried to install this way, it failed.
Can somebody confirm if I flashed correctly, just to put my worries to rest? Here's how I did it...
I backed everything up, unlocked bootloader, and tried to install Synergy r46 via ROM manager, but I had problem. I had the ZIP for the ROM downloaded to my Ext-SD card, like the installation instructions say. I then opened ROM Manager and went to "install ROM from SD card." The phone rebooted and opened in CWM to install...But kept having problems finding some "path" or something.
So I decide to wing it and rebooted into CWM. I cleared davik cache(sp?), then user data, then navigated to my Ext-SD and selected the ROM ZIP to install. Now, everything seems fine and it says it installed successfully, but I still think I installed in a way that wasn't described.
Is this a legit install and is this how most people flash ROMs, from booting directly into CWM, or should ROM manager have worked for me via "install ROM from SD card???" If so, why didn't ROM Manager work for me?
Rather urgent question: When I restore my items, do I want to click "RESTORE MISSING APPS + ALL SYSTEM DATA?" ill this restore the bloatware that was on my phone prior to flashing????? If so, is there any way around it
Thanks a bunch! Just waiting on an answer to the later questions before I restore.
Click to expand...
Click to collapse
I am wondering if you didn't do the full wipe. If you are using CWM v6.0.1.0 then there is no option labeled "user data" it is "wipe data/factory reset" which is the full wipe like I mentioned.
As far as doing it correctly, as you may have already noticed there is more than one way to do about anything. Personally, I still use CWM v6.0.1.0 and flash the zips there.
P.S. I see you are enjoying your freedom of losing your apples!
Also, tell me how your r46 is working ... I have held off at r23 while they are playing around with kernels and ramdisk tweaks for awhile.
Hi, I'm pretty much in the same boat as the OP coming from an iphone and this is my first android phone. My problem is that all of the synergy roms (r39, 46, 50 and 1.7) I tried were unstable and kept rebooting randomly. I unlocked the boot loader and believe I did everything right. Did I miss a step? I restored back my nandroid after several attempts at Synergy. I like the responsiveness and tweaks of Synergy but I couldn't deal with the random reboots. Sometimes it would just continue in a boot loop too.
dan_joegibbsfan said:
I am wondering if you didn't do the full wipe. If you are using CWM v6.0.1.0 then there is no option labeled "user data" it is "wipe data/factory reset" which is the full wipe like I mentioned.
As far as doing it correctly, as you may have already noticed there is more than one way to do about anything. Personally, I still use CWM v6.0.1.0 and flash the zips there.
P.S. I see you are enjoying your freedom of losing your apples!
Also, tell me how your r46 is working ... I have held off at r23 while they are playing around with kernels and ramdisk tweaks for awhile.
Click to expand...
Click to collapse
I'm fairly certain I did "wipe data/factory reset," I just wasn't sure how it was labeled when I typed that out, but that's really ringing a bell. I think I may have gotten the errors before (using ROM Manager) because I hadn't factory reset? Seems to me I'm good to go! However, my question regarding TiBu still remains.
Edit: In regards to informing you about r46, I'm not sure what to report as I've never used a previous Synergy and have no idea how to compare, other than to the rooted stock ROM. I have heard reports of battery life being worse than the stock ROM, and I can confirm this. I've barely used the phone since I flashed to Synergy and it's dropped 15% battery life in ~3 hours. Seems faster than before but I'm unsure.
nguyenvn said:
Hi, I'm pretty much in the same boat as the OP coming from an iphone and this is my first android phone. My problem is that all of the synergy roms (r39, 46, 50 and 1.7) I tried were unstable and kept rebooting randomly. I unlocked the boot loader and believe I did everything right. Did I miss a step? I restored back my nandroid after several attempts at Synergy. I like the responsiveness and tweaks of Synergy but I couldn't deal with the random reboots. Sometimes it would just continue in a boot loop too.
Click to expand...
Click to collapse
I started getting that sort of behavior so I just restored back to my stock rooted backup and reflashed Synergy 1.7 r23 and then reflashed the theme I'm using. I thought my issues came from other modifications I had tried so I will try to remember to report back to this post tomorrow and tell you if I'm still having those similar issues or if I'm stable again.
dan_joegibbsfan said:
I started getting that sort of behavior so I just restored back to my stock rooted backup and reflashed Synergy 1.7 r23 and then reflashed the theme I'm using. I thought my issues came from other modifications I had tried so I will try to remember to report back to this post tomorrow and tell you if I'm still having those similar issues or if I'm stable again.
Click to expand...
Click to collapse
Was 1.7 r23 supposed to be a really stable release? I read through some of the Synergy thread and didn't see anyone having the issues I had. I felt like I was doing something wrong.
nguyenvn said:
Hi, I'm pretty much in the same boat as the OP coming from an iphone and this is my first android phone. My problem is that all of the synergy roms (r39, 46, 50 and 1.7) I tried were unstable and kept rebooting randomly. I unlocked the boot loader and believe I did everything right. Did I miss a step? I restored back my nandroid after several attempts at Synergy. I like the responsiveness and tweaks of Synergy but I couldn't deal with the random reboots. Sometimes it would just continue in a boot loop too.
Click to expand...
Click to collapse
I have never had a hot boot or boot loop using any version of synergy. I've been running it since 1.3 and flashed last night's rom as well. What method of unlock did you use for the bootloader unlock? Did you see the custom kernel loaded into phone settings?
Sent from my SCH-I535 using Tapatalk 2
voodoomanx said:
I have never had a hot boot or boot loop using any version of synergy. I've been running it since 1.3 and flashed last night's rom as well. What method of unlock did you use for the bootloader unlock? Did you see the custom kernel loaded into phone settings?
Sent from my SCH-I535 using Tapatalk 2
Click to expand...
Click to collapse
I used the EZ-unlock app in the play store. I did see that a custom kernel was loaded however when i flashed back to my nandroid (stock rooted) I am back on the orignal kernel. Would the way I rooted have an effect on the reboots? I used the non flash method by Noxious Ninja.
voodoomanx said:
I have never had a hot boot or boot loop using any version of synergy. I've been running it since 1.3 and flashed last night's rom as well. What method of unlock did you use for the bootloader unlock? Did you see the custom kernel loaded into phone settings?
Sent from my SCH-I535 using Tapatalk 2
Click to expand...
Click to collapse
I agree I have yet to have Synergy boot loop although I'm still on 1.7. I would try to wipe cache and dalvik cache and see if that helps or you could be over clocking to high.
Sent from my Transformer TF101 using xda premium
nguyenvn said:
Was 1.7 r23 supposed to be a really stable release? I read through some of the Synergy thread and didn't see anyone having the issues I had. I felt like I was doing something wrong.
Click to expand...
Click to collapse
I don't know the answer to that specifically. All I know was that I was stable before another modification I made (that said it wouldn't work but I tried it anyway). Since restoring from backup and reloading Synergy and theme I have not seen any weird rebooting anymore.
nguyenvn said:
Would the way I rooted have an effect on the reboots? I used the non flash method by Noxious Ninja.
Click to expand...
Click to collapse
I'm not familiar with that method. I've only used Odin, even when I did have to redo everything I used Odin to stock de-bloated rooted .md5 then CWM'd from there.
So I'm giving it another shot on r50. I made sure to clear dalvik, cache and data. After flashing It gave me the reboot problems again. I installed system tuner to change the cpu back to 1.5. Maybe it's from the overclock but we'll see how it goes. Is everyone leaving it overclocked on 1.9 not having issues?
nguyenvn said:
So I'm giving it another shot on r50. I made sure to clear dalvik, cache and data. After flashing It gave me the reboot problems again. I installed system tuner to change the cpu back to 1.5. Maybe it's from the overclock but we'll see how it goes. Is everyone leaving it overclocked on 1.9 not having issues?
Click to expand...
Click to collapse
That may very well be the issue. 1.9ghz is a very aggressive overclock, and i wouldn't be surprised if was unstable on a good number of phones. Synergy's supposed to boot at 1.5ghz max by default - I don't know whether that was successfully implemented. I personally think it's silly to OC such a capable phone, anyway. Back in the days of the Droid 1, an overclock from the stock 550mhz to 800mhz-900mhz was an enormous improvement. Today, the only thing OCing the S3 gets you is a <10% improvement in Quadrant, more heat, possible instability, and no perceptible difference outside of those silly synthetic benchmarks.
Anyway, in this thread, there seems to be a fair bit of confusion as far as what's what in the android partitions. I'll give you a short rundown.
"aboot" is what's referred to here as the bootloader. It checks to see whether the next partition in the boot sequence, "boot", is authorized. When you unlocked your bootloader, you overwrote aboot with a version that does not perform that check.
"boot" contains your kernel. If your ROM has a custom kernel, it contains a boot.img to overwrite boot.
"system" is the meat of the OS. This is primarily what ROMs flash.
"data" contains all of your apps and settings. When you perform a factory reset, you're reformatting data. If you're flashing a ROM that is significantly different from what you're on now, some of those old settings and data can cause errors, force closes, random reboots, and boot loops. When in doubt, wipe data before flashing a new ROM. When going from one version of a ROM to a newer, very similar version of the same ROM (nightly to nightly), you probably don't need to wipe data, but make a backup just in case. dalvik-cache is also in data; if you wipe data, you've automatically wiped the dalvik cache. It's redundant to wipe data and then wipe dalvik cache.
"cache" is just that, the cache partition. Clearing it won't make you loose anything, at least not anything Android won't silently replace.
So far it seems to be pretty stable on r50. I installed system tuner and brought it down to 1.5 Ghz. I'm not sure why 1.9 is set to default. Doesn't seem like a good idea to me. Thanks all for the help/advice.
I'm not a dev, but it's obvious to me something is wrong.
I re-flashed the eaglesblood ICS rom using clockworkmod recovery v.5.8.1.3 (touch version)
everything seemed okay.
until i started putting apps back on my phone with app backup and restore.
I was getting "process syystem has stopped responding" all over the place.
Then the phone crashed.
it keeps booting, only three apps seem to be running that show themselves in the taskbar, Groove IP, GV SMS integration, and Battery Notifier (Big Text)
It sits there, one one of the home screens, LW animating slowly as it will.. then the phone reboots for no reason.
I installed 4 or 5 different logcat apps but i can't make heads or tails of them
and adb logcat > logcat.txt just spits out this :
/sbin/sh: exec: line 1: logcat: not found
dmesg spits out the log i'm attaching.
Can anyone help me? If i can save the log from one of the logcat apps, will that help?
I'd rather not have to reflash and re-install apps AGAIN.
Where you flashing EB 4.0.4 from gingerbread ?
In any case a full wipe and reflash of the ROMs would work fine. Then reflash the appropriate gapps, But when restoring the apps using TB just restore at apps and not their data. They sometimes don't play well.
I had a similar issue when I tried flashing the 4.2 gapps on 4.1.2 keyboard would crash everytime and any app that uses even one of the google services would crash right away.
I cleared dalvic cache did a dirty flash over my existing 4.1.2 , reflashed the 4.1.2 gapps then I fixed permissions and in was good to go.
Sent from my LG-P999 using xda app-developers app
Barracuda1101 said:
Where you flashing EB 4.0.4 from gingerbread ?
In any case a full wipe and reflash of the ROMs would work fine. Then reflash the appropriate gapps, But when restoring the apps using TB just restore at apps and not their data. They sometimes don't play well.
I had a similar issue when I tried flashing the 4.2 gapps on 4.1.2 keyboard would crash everytime and any app that uses even one of the google services would crash right away.
I cleared dalvic cache did a dirty flash over my existing 4.1.2 , reflashed the 4.1.2 gapps then I fixed permissions and in was good to go.
Sent from my LG-P999 using xda app-developers app
Click to expand...
Click to collapse
so a dirty reflash and fix permissions might help?
Funny enough, after posting that, and hitting reboot on CWM recovery.. the phone came up with the cord plugged in, and seems to be stable for now.
Uhm. i was flashing from.... heck if i know, i've tried a bunch of roms.
the phone INITIALLY was 2.3.4
back when i started.. months ago.
Eve_brea said:
so a dirty reflash and fix permissions might help?
Funny enough, after posting that, and hitting reboot on CWM recovery.. the phone came up with the cord plugged in, and seems to be stable for now.
Uhm. i was flashing from.... heck if i know, i've tried a bunch of roms.
the phone INITIALLY was 2.3.4
back when i started.. months ago.
Click to expand...
Click to collapse
grrrrrrrrrr. i'm back at the crashing behavior
I see "equalizer activated " then the phone gets stuck... that same "equalizer activated" thing came up when i added speakerboost... wonder if it's the cause..
Eve_brea said:
grrrrrrrrrr. i'm back at the crashing behavior
I see "equalizer activated " then the phone gets stuck... that same "equalizer activated" thing came up when i added speakerboost... wonder if it's the cause..
Click to expand...
Click to collapse
*grumble* damn sun-downer phone. SO all night it was crashing.. So i finally got irritated when i went to bed, yanked the battery out and plopped it on my night-stand by my fan.
This morning i put the battery in, turn it on, and it seems stable.
What the heck?!
logs.
So... between all the log apps i've played with i have a bunch of logs.. if anyone could look them over and tell me if they see a problem, i'd appreciate it.
Re-download Rom+Gapps
Place on SD card
Re-nvflash cwm recovery 5.0.2.0
Wipe data/cache/davlk/battstats/format system
Install rom+gapps
Wipe cache/davlk/battstats
Fix permissions
Reboot
Using touch is sometimes buggy, 5.0.2.0 is most stable. Restoring apps/data is sometimes a messes things up.
Sent from my LG-P999 using xda app-developers app