Related
Succesfully installed hyperdragon3m
Did the reset as per instructions.
Installed the addons suggested and the MMS addon
Was able to add the Data settings fine but the MMS menu seems to be completely missing.
how do i get MMS working on my kaiser?
EDIT NVM me being stupid!.
dragon2611 said:
Succesfully installed hyperdragon3m
Did the reset as per instructions.
Installed the addons suggested and the MMS addon
Was able to add the Data settings fine but the MMS menu seems to be completely missing.
how do i get MMS working on my kaiser?
EDIT NVM me being stupid!.
Click to expand...
Click to collapse
Happy to know you were able to resolve issue independently.
yes I couldn't find the MMS options at first it's because a few things changed around.
Found them in the end
Please read / research before starting a new thread.
Post relevant information relating to a ROM in that thread instead of creating a new one.
If You Can't Figure Out How To Get Data, Message Me And I Will Do It For You. A Tip Would Be Appreciated But Not Required.
These rom's are meant for people who are on MetroPCS. Please don't use them if your sprint or anyone else. These roms have everything working from boot and should keep on working for aslong as you have your phone =D. I've made a couple different flavors of roms. Default HTC Sense, AOSP CyanogenMOD, and MIUI. Try whichever you like =D.
Here is a Completely Detailed How To on how to Provision your phone for data and mms.
MetroPCS Data and MMS Provisioning Guide
Instructions For MetroDroid
1. Copy Zip to SD
2. Boot Into Recovery
3. Flash MetroDroid
4. Reboot
5. Enjoy! =D
Rom will Wipe DATA and SYSTEM so if u have anything you need from your current apps be sure to back it up =P
Instructions for MIUI or AOSP Scripts
1. Copy Zip to SD
2. Boot Into Recovery
3. Flash the Script
4. Reboot
5. Enjoy! =D
DOWNLOADS
ROMS
MetroDroid v4.0
Scripts
MetroPCS Evo Sense 4.67 Based MMS Script v1
MetroPCS Sense 2.1/3.0 Hybrids MMS & Web Script v5
MetroPCS Evo AOSP Script v8
MetroPCS Evo ICS Script v2
MetroPCS Evo MIUI MMS Script v5
MetroPCS Evo Sense 3.0 v2
MetroPCS Evo TN RLS 5.4
MetroPCS Evo Sense 3.5 v1
Might have to reboot twice for MMS app to show up
Also if your Youtube isnt working on MetroDroid do this
Have wifi on even if your not connected and then don't this and wifi will work
dial ##3282#
edit mode
enter 000000 (or w/e your msl or spc is)
goto advanced
scroll to rtsp proxy address and http pd proxy address and change them to 0.0.0.0
hit back twice and now try YouTube. Then while on data be sure to have wifi on even if its not connected to anything and YouTube should work
I would like to thank
Chris1683 - For His Sprint Lovers Rom as a base
Bcnice20 - For letting me use the MIUI Rom for MetroPCS users and for the Galaxy S Keyboard
Netarchy - For his awesome kernel
Deathsled - For his Cricket Rom as reference
12MaNy - For His Bootanimation
Tolken419 - For creating the original zip that got everything working on the Eris
Whiterabbit - For making the files to get the Web working through u2nl
and i would like to thank anyone else who i missed
CyanogenMOD Team - For their great roms =D
Please Report any bugs or problems you are having with the rom or any changes you wish to see?
Changelog
MetroDroid v3.0
Updated to latest EVO OTA based rom
Added MetroPCS visual Voicemail
MetroDroid v2.2
Using Sprint Lovers as a Base
No more running data through u2nl =D
Modified Mms.apk to the one in the Sense Script
Shows 1x instead of showing 3G all the time when we all know its a lie
MetroDroid v2.0
Using OMJ's rom as a base
Based on the latest Evo OTA
MMS now works without incredible files so should fix issues with mms widgets and other things
MetroDroid 1.2
Updated to new Sprint OTA rom from Barnacles10 RefinedEvo Rom being used as a base
Should have the fixed problems where some people werent getting data and mms working
added Galaxy S Keyboard thanks to the MIUI team
MetroDroid v1.1
Changed to DC 3.1.2 base rom.
Hopefully this will fix Youtube and It Definately will fix Pandora and any other streaming apps.
this is probably not the kind of post you want on your thread, but can you share the settings you used to get "everything" working?
right now i can receive MMS (with wifi off) but can't send out. K9 mail receives and sends email only over wifi. everything else (market, facebook, web, texts, etc) work on data network.
i have way too much put into this rom to consider flashing for a while, that's why i'm not flashing yours.
a reply here or via private message would be great!
well if you use dsixda's kitchen first thing you want to do is go to advanced options and add use option 17. then go into /system/etc/ and make a folder called init.d then unzip my rom and copy the 08metropcs in the same location and rename it to 01metropcs and place it in your init.d folder that will give data automatically also go into the bin and copy u2nl and then go into xbin and copy sqllite3 and place it in their respective folders. Now to get the mms app to default to having 500k max message settings go into /system/customize/MNS/ and copy default.xml and place it in the respective folder if your using the latest OTA as a base just use these files from my /system/app folder and put them in yours
htcMessageUploader.apk, MediaProvider.apk, MediaUploader.apk, Mms.apk, TelephonyProvider.apk, UploadProvider.apk,
VVM.apk, WifiRouter.apk
and that should let your mms work fine in the default app
and thats about it i think
well actually one more thing but it actually depends on the rom your using as a base
also depending on the email i get a few to work for gmail it works fine on 1x, yahoo mail with the yahoo mail app from market lets it work fine, hotmail is the only one i havent gotten to work yet but you could just go online for that i guess
doing it right now... lets see how it goes...
I just installed it and i don't have WEB or MMS plus my network still searching...
what could be that problem?....
have your setup your phone correctly? cuz if not data nor mms will never work im using it on my phone and it works just fine on first boot
plus your phone has to be on metropcs cant be on sprint. a rom wont make your phone to metropcs unless your phone is in their database
i still got no signal it says ANALOG B...
I think im....
If you have MSN or Yahoo messenger pls let me know.. so you can explained detail by detail...
I will rlly appreciated...
Ok first is your phone on MetroPCS or is it on Sprint? Also if it is on MetroPCS has your phone setup correctly?
My phone its under metropcs network....
Setup correctly you mean?... now that signal came back...
& i keep getting this error...
DATA CALL FAILURE
Error code 67. registration failure. Your pcs vision username and/or password may be incorrect. please try again...
mmmmmm What i need to do to fix that...
yea your getting that because your phone is not programmed correctly and if you dont have any experience in this it will prob be hard for you. Im going to right up a guide in a few days to help people out with this so for now you just have to live without mms and web. you should still recieve phone calls and regular messages but til you program the phone correctly you wont have mms or web
ok thanks
Im trying to help out a friend because he has metro and he bought a evo so what i got to do after i flash the rom thanks
remember to make a rom for the incredible as well!
guys u have to flash your phone to metroPCS first you cant just put a rom on it and bam your done. Later today ill write up a guide so sit tight
Error 67
My evo phone was flashed for revol wireless and I have the same issue. I have put all the proper network settings in, rooted, Installed a new rom.
Whn it attempts to connect to web and mms all I receive is error 67 also.
Any help would be greatly appreciated
Does anyone have a preconfigured rom for revol?
for revol just go to the Droid Eris page and you'll find Tolken419 MetroPCS thread he has a script for it that you run in recovery and use autostart
Waiting on that GUIDE
I tried that script and I still get the same error 67 message message. Any other ideas?
thanks Again
ok here is the problem im running ultimate droid 3.3 on htc evo on boost mobile now question everything i read says to do the ##3282# brings nothing up and yes im rooted and have my msl code now what i do is ##3282# from phone and nothing then try send still nothing but failed call ive also tried the deleting the file in data data android.telephony fix and reboot nothing i can recieve mms but not send just sits there and does not go no error or this is to big everything else works flawlesss on this phone please help anybody.
I use the application MSL READER, YOU CAN DOWNLOAD THE MARKET IS FREE, and tell your password to ENTER ** 3282 *
You need a sense based ROM. AOSP roms such as CM 7 don't contain these menus. Nandroid backup and flash a sense rom.
sacobel said:
I can help you fix you mms problem, email me at [email protected]
Click to expand...
Click to collapse
Wouldnt it be nice to post your solution on here, so other users having the same problem can benefit from it?
if ##3282# doesn't do anything make sure your on a sense rom Using STOCK dialer,
if yes to both those and still nothin' search forums for and re-install EPST.apk
then redo ##data# > Edit mode > enter msl > Advanced > MMS Server URL -->change to http://mm.myboostmobile.com -->Menu button >Commit Modifications
reboot and test mms
Just use apn backup and restore if you can't access epst
Thanks guys! This thread helped greatly!
hey guys,
I'm currently running CM13 nightlies and want to do a clean install without flashing over my current setup. is there any way i can retain my provisioning while flashing a new cm build? i tried wiping and installing a new nightly build. everything booted fine, but the phone was not provisioned. even after flashing mvno slayer, the phone wouldn't register to the network.
I have to flash back to stock and then flash cm if I want a fresh install?
Provisioning *should* persist through flashes... unless you're changing providers.
I was able to get my device provisioned for Sprint on stock when I used it, and then was able to flash any ROM I wanted. Never needed to go back to stock, but I always stayed on Sprint.
arrrghhh said:
Provisioning *should* persist through flashes... unless you're changing providers.
I was able to get my device provisioned for Sprint on stock when I used it, and then was able to flash any ROM I wanted. Never needed to go back to stock, but I always stayed on Sprint.
Click to expand...
Click to collapse
technically it's ringplus (updated title), but I don't think being an MVNO makes the process any different. So if I wiped and flashed a new CM build but couldn't get the phone to register, what can I do? Trying to avoid going through the whole process of RSDlite back to stock and starting from complete scratch...
gtmaster303 said:
technically it's ringplus (updated title), but I don't think being an MVNO makes the process any different. So if I wiped and flashed a new CM build but couldn't get the phone to register, what can I do? Trying to avoid going through the whole process of RSDlite back to stock and starting from complete scratch...
Click to expand...
Click to collapse
I'm not following - was it working before, and the act of updating the ROM to a newer build of CM broke the provisioning?
Never heard of that before, but have you considered it's the update? Have you tried restoring a backup? You do have a backup...?
arrrghhh said:
I'm not following - was it working before, and the act of updating the ROM to a newer build of CM broke the provisioning?
Never heard of that before, but have you considered it's the update? Have you tried restoring a backup? You do have a backup...?
Click to expand...
Click to collapse
Yes, everything was working fine. I wipe, then flash a new build of CM, but it doesn't register with the network. Restoring my backup has everything working again. It's just that the rom has been quite sluggish and I wanted a fresh start. I don't know if it was always like this or because of an app. That's why I'm starting over
gtmaster303 said:
Yes, everything was working fine. I wipe, then flash a new build of CM, but it doesn't register with the network. Restoring my backup has everything working again. It's just that the rom has been quite sluggish and I wanted a fresh start. I don't know if it was always like this or because of an app. That's why I'm starting over
Click to expand...
Click to collapse
Just try to clean wipe the working ROM, see if that works.
If it does, I'd say that update of CM is the issue.
Did you ever find a solution? I am having the same problem. If I install the latest CM 13 the phone no longer connects to the cell network. Stupidly, I did not do any backup, so the only option I have to go back to the stock ROM. With the stock ROM the phone connects to to the network with no problem.
nemo3 said:
Did you ever find a solution? I am having the same problem. If I install the latest CM 13 the phone no longer connects to the cell network. Stupidly, I did not do any backup, so the only option I have to go back to the stock ROM. With the stock ROM the phone connects to to the network with no problem.
Click to expand...
Click to collapse
What about flashing an older build of CM13?
What were you running before you flashed the latest CM13?
arrrghhh said:
What about flashing an older build of CM13?
What were you running before you flashed the latest CM13?
Click to expand...
Click to collapse
To answer your questions, I was running CM13 I can't find older builds of CM13 that work. The only ones I find are relatively new.
I managed to get voice to work. I still don't have data. These are the steps I took. I am not sure all of them are necessary. But at least now voice is working.
Dial *#*#4636#*#*
Click on the 3 vertical dot menu on top right
Select Radio Band -> PCS (1900 MHZ)
Back button <|
Set Preferred Network Type to LTE/CDMA (auto PRL)
Back button <|
Back Button <|
Settings -> Cellular Network Settings ->Preferred Network Type -> CDMA+LTE/EVDO
Settings -> Cellular Network Settings->CDMA subscription -> NV
Reboot
---------- Post added at 05:23 AM ---------- Previous post was at 04:44 AM ----------
OK, now I got 3G data.
I changed
Settings -> Cellular Network Settings ->Preferred Network Type -> CDMA/EVDO/GSM/WCDMA
Reboot
Now if I could only get 4G without losing voice I'd be all set. Little by little...
---------- Post added at 05:25 AM ---------- Previous post was at 05:23 AM ----------
If I go to Settings -> Cellular Network Settings ->Access Point Names, I get a message that says "APN settings are not available for this user". Is that normal? I seem to remember I had a list of APNs.
I've got the exact same problem with the CM13 nightlies on Ting. I've tried a bunch of them all the way back to April and can't get LTE to work on any of them.
If I go back to the stock ROM, it works fine. If I go back to CM11, it works fine.
I don't know if its related or not, but in the SatStat app, it shows a bunch of dashes under LTE and some long numbers like 21474 83647. This line disappears and reappears every few seconds while the app is open.
abortretryfail said:
I've got the exact same problem with the CM13 nightlies on Ting. I've tried a bunch of them all the way back to April and can't get LTE to work on any of them.
If I go back to the stock ROM, it works fine. If I go back to CM11, it works fine.
I don't know if its related or not, but in the SatStat app, it shows a bunch of dashes under LTE and some long numbers like 21474 83647. This line disappears and reappears every few seconds while the app is open.
Click to expand...
Click to collapse
If it works in CM11 but not CM13, then something changed... Please submit logs to the CM maintainer (radio logs will probably be necessary). Of course make sure the correct settings have been applied.
Red Pocket Mobile APN Settings
arrrghhh said:
If it works in CM11 but not CM13, then something changed...
Click to expand...
Click to collapse
Following this procedure allowed me to use Voice, SMS MMS and internet (both 3G and 4G) on PAC-ROM and builds of Cyanogen Mod up to and including 12.1. I have not tried 13.
Code:
1. click "Mobile networks" to access the settings
2. Data enabled checked
3. Data Roaming unchecked
4. Battery Saving Mode unchecked
5. Set preferred network type to: CDMA+LTE/EvDo
6. System select - set roaming mode to Home Only
7. Set CDMA subscription to NV
8. Create a New APN with these values:
a. Name: Red Pocket
b. APN: n.r6.ispsn
c. Proxy: Not set
d. Port: Not set
e. Username: ##########@redpocket.sprintpcs.com
replace ########## with your red pocket mobile phone number
e. Password: Not set
f. Server: Not set
g. MMSC: http://mms.sprintpcs.com
h. MMS proxy: 68.28.31.7
i. MMS port: 80
j. MCC: 310
k. MNC: 120
l. Authentication type: Not set
m. APN type: default, mms
n. APN protocol: IPv4/IPv6
o. APN roaming protocol: IPv4/IPv6
p: Unspecified
q. MVNO type: None
r. MVNO value: Not set
s. save changes
9. Set the Red Pocket APN as your active one.
10. reboot
Net10 APN Settings?
I am giving you how I went from point A to B in this post. My next post will be the correct settings for my new Sprint mvno: Net10.
After getting voice, data, sms and mms working in the rooted stock ROM, I install the xposed framework for Android 4. Reboot
Open Play store and install "Hidden Android Settings" and "NoHiddenPasswords". NoHiddenPasswords is an xposed tool, but does not show up if you do a search in the xposed manager app. Open xposed and Enable NoHiddenPasswords. Reboot.
Back-up your tweaked Stock ROM with TWRP.
Install Cyanogen. When Cyanogen boots up, go to Settings-"Mobile Networks", my educated guess is that the settings for
Data enabled
Data Roaming unchecked
Battery Saving Mode unchecked
Preferred network type: CDMA+LTE/EvDo
System select - set roaming mode to Home Only
Set CDMA subscription to NV
I can at least confirm those work with the two mvno's I have used: Red Pocket & Net10.
The first thing I tried was to the same settings as I showed in my prior post.
I tried changing 8.e. to ##########@net10.sprintpcs.com. Then I tried ##########@sprintpcs.com. Neither of those worked, so I knew I needed to find the value using some tool in the Stock ROM. I googled Android APN settings app, and found "Hidden Android Secrets". It has a APN settings viewer. When I looked at the ones in my phone, I saw some password fields that it would not show me without the help of NoHiddenPasswords.
Then I used Notepad++ on my laptop to copy the information shown in each access point in the stock rom on my phone. I did a new tab for each access point.
It seemed pretty obvious that at least 8e would need changed.
I tried changing 8e to ##########@net10.sprintpcs.com
I then tried ##########@sprintpcs.com
Voice works & SMS worked, but no data nor MMS over 4g.
I notice that none of the access points in my stock ROM has any reference to n.r6.ispsn. There is one with an APN n.t9.ispsn. That is very similar so I changed 8.b. to that. Miracle, I now have LTE data!
Unfortunately, though, the MMS is till not working over LTE.
In my stock ROM, there is one and only one APN with APN Type: default,mms
BTW, there is no space after the comma in the stock ROM, so I changed that.
I merged its values into my APN.
This did not kill my data; so, I tried sending and receiving MMS. Tada, that's it.
APN Settings for Net10
RandyB201 said:
... the correct settings for my new Sprint mvno: Net10...
Click to expand...
Click to collapse
Code:
1. Open Settings
2. click "Mobile networks" to access the settings
3. Data enabled checked
4. Data Roaming unchecked
5. Battery Saving Mode unchecked
6. Set preferred network type to: CDMA+LTE/EvDo
7. System select - set roaming mode to Home Only
8. Set CDMA subscription to NV
9. Create a New APN with these values:
a. Name: Net10
b. APN: n.t9.ispsn
c. Proxy: Not set
d. Port: Not set
e. Username: none
e. Password: none
f. Server: Not set
g. MMSC: http://mms.sprintpcs.com
h. MMS proxy: 68.28.31.7
i. MMS port: 80
j. MCC: 310
k. MNC: 120
l. Authentication type: Not set
m. APN type: default, mms
n. APN protocol: IPv4
o. APN roaming protocol: IPv4
p: Bearer: LTE
q. MVNO type: None
r. MVNO value: Not set
s. save changes
10. Set the Net10 APN as your active one.
To be clear, the username and password are not an empty / null string. They are the word "none" all lowercase letters...
When flashing the Motorola Moto G 2015 with any custom ROM (Cyanogenmod, Resurrection Remix, Lineage), the PRL information sticks until a reboot from custom ROM.
When rebooting, the phone has internet access (including Hotspot), however no text messages, inbound/outbound phone calls do not work. The fix has been flashing Virgin Mobile stock ROM in TWRP recovery, programming the phone (##72786#) and then restoring a backup from custom ROM via TWRP recovery. Then the phone will again be able to send/receive text messages and phone calls - until the next reboot.
Would like to know if there is a fix to bypass reflashing stock ROM if phone needs rebooting from custom ROM. This process takes about 15 - 20 minutes. Big nuisance.
Any assistance would be appreciated.
------------
NetSpeedZ said:
Any assistance would be appreciated.
Click to expand...
Click to collapse
Copy this APN (see the attachments), to system/etc and set permissions to 0644 or rw-r--r-- with a root explorer. Reboot. Go to settings>more>cellular networks, select LTE in Preferred network type, and RUIM/SIM in system select. Tap the "carrier settings" option at the very bottom. All the radios will reset and come back on in a few seconds, and everything should work after that. Let me know if you need any more assistance, I'll be happy to help. I've had to deal with this issue since day one.
Edit; You will only have to do this after flashing a ROM, and this includes updates too. It can also be done through TWRP's file manager immediately after flashing before you even boot it the first time, and without root.
Spaceminer said:
Copy this APN (see the attachments), to system/etc and set permissions to 0644 or rw-r--r-- with a root explorer. Reboot. Go to settings>more>cellular networks, select LTE in Preferred network type, and RUIM/SIM in system select. Tap the "carrier settings" option at the very bottom. All the radios will reset and come back on in a few seconds, and everything should work after that. Let me know if you need any more assistance, I'll be happy to help. I've had to deal with this issue since day one.
Edit; You will only have to do this after flashing a ROM, and this includes updates too. It can also be done through TWRP's file manager immediately after flashing before you even boot it the first time, and without root.
Click to expand...
Click to collapse
Cyanogenmod 12.1 does not have the menu - settings>more>cellular networks. Is this done via stock ROM?
Also, don't have RUIM/SIM in system select. Only 'Home Only' and 'Automatic'.
------------
NetSpeedZ said:
Cyanogenmod 12.1 does not have the menu...
Click to expand...
Click to collapse
Try rebooting the ROM without your sim card in. Then put it back and reboot once more. It should reset. I didn't realize you were still using cm12. Those settings are only found in 6.0.1 and up. The apn settings not being visible has something to do with us being CDMA. I think it's the sim cards virgin uses.
You also need to add these lines to the end of your build.prop too. (Not needed on MM+)
ro.cdma.home.operator.numeric=311490
ro.cdma.home.operator.alpha=Virgin Mobile US
ro.telephony.default_network=8
telephony.slteOnCdmaDevice=1
Spaceminer said:
Try rebooting the ROM without your sim card in. Then put it back and reboot once more. It should reset. I didn't realize you were still using cm12. Those settings are only found in 6.0.1 and up. The apn settings not being visible has something to do with us being CDMA. I think it's the sim cards virgin uses.
You also need to add these lines to the end of your build.prop too. (Not needed on MM+)
ro.cdma.home.operator.numeric=311490
ro.cdma.home.operator.alpha=Virgin Mobile US
ro.telephony.default_network=8
telephony.slteOnCdmaDevice=1
Click to expand...
Click to collapse
While waiting for your reply, I copied the APNS-Conf.xml file attached to your original reply to the system/etc folder on phone and rebooted. Inbound/outbound phone calls and text messages seem to be working now. Even performed a backup in TWRP and then rebooted again. All seems to be operating properly.
I did not add the build-prop text you gave in previous reply. What exactly does this build-prop text do? I'm hesitant in adding it as everything is operational - the old saying 'don't fix what isn't broken'.
I was using Cyanogenmod 13, however, I did not like some of the Cyanogenmod 13 apps, i.e., text messaging app. The Cyanogenmod 12.1 texting app has many features that CM 13 doesn't. Also, CM 12.1 seemed to run smoother on the Motorola Moto G 2015 phone I'm currently using.
Also would be interested in knowing where the apns-conf.xml file was pulled from and what all this file did to make everything work again.
FYI, as standard procedure I always mount system and then flash the Virgin Mobile APNFix (which I've attached for anyone running across this thread in need of this file) in TWRP after flashing a new ROM and associated GAPPS , however, it seems that the apns-conf.xml file became corrupt/unusable somewhere along the line.
Your efforts in helping me solve this issue are appreciated.
------------
NetSpeedZ said:
I did not add the build-prop text you gave in previous reply. What exactly does this build-prop text do? I'm hesitant in adding it as everything is operational - the old saying 'don't fix what isn't broken'. ....
Also would be interested in knowing where the apns-conf.xml file was pulled from and what all this file did to make everything work again.
Click to expand...
Click to collapse
If everything is working properly, then don't worry about adding those lines. I had to add those and the apn to get LTE working on the older test builds of cm12. As far as I know, it just locks you to virgin. It was likely fixed in later builds of cm12.
The APN I pulled from an older build of cm13. When flashing the older ones, the install process would locate and copy virgin's current apn to /system/etc and rename Motorola's default APN to .bak. (The giant 500kb+ APN with all the carriers found in stock.) It would also add a US Cellular APN. I discovered at some point from poking around enough, that deleting the .bak and US Cellular APNs got LTE working if I reset the radio afterwards.
Spaceminer said:
If everything is working properly, then don't worry about adding those lines. I had to add those and the apn to get LTE working on the older test builds of cm12. As far as I know, it just locks you to virgin. It was likely fixed in later builds of cm12.
Click to expand...
Click to collapse
This is a nice and informative thread for anyone that has the same issues that you and I have had with Virgin Mobile APN's. Hopefully it will be added to Google searches soon.
Appreciate all the help.
------------