Hi guys,
Sense UI won't let me add a brightness control to the main screen. Can anyone suggest a decent and simple app to manually control screen brightness please?
I would have loved to have used the LUMOS auto back light app but that needs HTC drivers I believe :-( D'oh.
Try MVBklight 1.4.3
It's quite old but I've never found something better. I just use it also on my HD2 when I want to override the sensor. For the TG01 I think it's perfect.
I'll check it out. Thanks for that EDIT: Could only find 1.4.2 on XDA.. so googled it and got 1.4.3.
UPDATE: Can't get it to work. Maybe I need to edit the english config file to add in the TG01 or something?
ok, I'll give you all settings for TG01. But please hold on. I got to retrieve from my archive. My TG01 is under repair and I don't have settings close at hand. Please come back later.
Fab, really appreciate that
Here you are.
Attached you find screenshots of configuration for TG01.
As you can see minimum brightness value is 57, maximum is 255. You got to take it in account if you want also to use links to control brightness via command parameters.
I remember I had problem with links (I dont remember exactly what). So I also attached (syntactically) corrected links. But you have to localize the name of your program folder inside them.
MVBklight provides even a today plug-in. I am afraid it doesn't work. But I think it would not be so usefull, especially if you use Sense.
In the configuration you can see the use of a vga skin. Be sure to provide it (one is included in the package you downloaded). I tried to custominze the skin with other images but I didn't success, probably due to a wrong image format. I accualty spent few minutes on this, so if you get it right and achieve a nicer skin, let me know!
So, add a link to Popup.exe in your Sense UI and enjoy your brightness slider.
Please, ask if you need more.
P.S.
Ehi, remember that with MVBklight you get a torch too.
Thanks for that I'll download and try these tomorrow Odd that minimum is 57! (or is that the minimum YOU want it to ever be?)
It's not me.
On TG01 values below 57 have no effect. As for values over 255. It depends on device.
On HD2 minimum is 1 and maximum is 10. So on HD2 you can just change brightness by steps of 10% while on TG01 variation is much more smooth.
Again, it depends on hardware of device.
Fantastic. Finally got it working with those settings I will have a go at some other skins perhaps Now have brightness control on the screen.
The big mistake was me not swapping to 'manual', so it never saved my changes.
UPDATE: just playing around with the icon/images for better one's. Strangely, not every icon seems to work even if it's in the same size and format, it's really odd. Trying to change the bar's.. let's see what happens.
UPDATE2: Really struggling with these images. Even if I only edit them and save as the original type.. they won't show up. Bizarre. It's a little bit annoying actually. I'll have to keep trying as I want it to fit more into the them of black/white Sense UI.
I played right now with Resco Photo Manager.
Just doodled on left.bmp and saved.
It works.
Can't do more tests. I am at work...
Let's keep on trying. It's a long time I'd like to change the skin!
Lyrus said:
I played right now with Resco Photo Manager.
Just doodled on left.bmp and saved.
It works.
Can't do more tests. I am at work...
Let's keep on trying. It's a long time I'd like to change the skin!
Click to expand...
Click to collapse
Could you share some pictures or a video? It sounds interesting! I'm using an free program called Metrix from http://www.apoxsoft.com/products/metrix/ and it works perfectly. But it's a Today plug-in, so it doesn't work on Sense.
Although it seems a little dated, it can be fully configurated. If any interested I can give you the TG01 parameters for brightness control
Best Regards
I am trying the following files. (THe 'RIGHTOLD.BMP' should be right.bmp btw) The only one that actually displays is the SLDR one :-( Annoying.
Trying to mess with them some more to see if I can make them work.
@Pere
Here you are a screenshot.
It's the easiest way to control brightness. I have the link in the bulb on the left of the screen but on TG01 also double tapping the zoom bar so the slider will pop up on whatever application is running in that moment.
Metrix is nice. But it's only a plugin for the today. I really need a popup instead.
@Scougar
Yes, your sldr.bmp works. Not the others. I tried to resave them from Resco Photo Manager but with no success.
The strange thing is that the left.bmp attached is the original with some doodling and saved from RPM. It works but the doodling results in a trasparency as you can see in attached screenshot where I changed the color of the background to make it clear.
I think that there is something to understand regarding how trasparency is handled. Could be that our images are treated for some reason as totally trasparent?
Related
FYI, CHome Weather 2.0 works on the VOX. Please follow the link to see the original thread in the Excalibur forum.
http://forum.xda-developers.com/showthread.php?t=396068
And click here to download the files needed for the Vox.
http://forum.xda-developers.com/showpost.php?p=2250095&postcount=43
Hello...just downloaded this version of CHome Weather and it looks amazing...great job. There's only one problem, probably related to the 240x320 cpr file because, like I already read in the excalibur forum, there's an issue in 240x320 where the background looks a little odd and doesn't fit the area like it supposed to. But again amazing job...keep it up
EDIT: I've just used a version of the 240 x 320 cpr file already used in another version of your plugin and it works great now
I was just now testing the other layouts and there are some issues:
- I realized that everytime i change the layout, it doesn't matter the cpr 240x320 file i did put there because when the layout is changed the cpr file is kind of replaced by the one corresponding to the sellected layout.
- In the HTC and Iphone layout, it shows always an icon with a cross below the icon of the current weather, instead of showing the icon corresponding to the weather.
- In regular layout, the gold and silver backgrounds don't work well in 320 x 240.
- In the regular layout, in the 1 and 3 layouts, I can't see the hi and low temperature.
Yeah, you'll have problems with the portrait layouts.
Is it possible to fix the problem with portrait?? That is the last thing, that keeps me from donating.
I am so happy with this program. I worked as Organic M's test subject to get this working. I can't say I notice the problem you guys are talking about in regards to portrait mode.
This is what I see:
have the author, removed the files from the location... I am unable to get those...
Can someone help plzzzzzzz!!!!!!!
Thanks
Loku
lokeshmudgal said:
have the author, removed the files from the location... I am unable to get those...
Can someone help plzzzzzzz!!!!!!!
Thanks
Loku
Click to expand...
Click to collapse
There are 2 links in the main post at the top of this thread.
The first one is the weather program
The second one is all the files that need to be installed to /windows on your device
Davis,
From your post, it looks like that screen is in ladscape mode. Portrait is taller than wider, yours looks wider than it is taller.
Thanks a lot.. I found the same at the post. I was just eager to get Weather update on my VOX...So got carried away...
Thanks
Loku
frauhottelmann said:
Is it possible to fix the problem with portrait?? That is the last thing, that keeps me from donating.
Click to expand...
Click to collapse
Well if you put it that way, you'll definitely NOT get me to fix the portrait layouts. How about.. "here's a small donation and small request... I would really appreciate it if you could work on the portrait layouts(which is a major PITA) so this works properly on my phone".
Well then I Only wanted to know if it is possible to do it. But I can live without it. I can look outside to see the weather. You know I made a lot of stuff for the Vox...but I never received ANY donation!!!
works beatifull. got no issues with any layout (i'm using plain black background). excellent job!
the only question i have is if it is possible to manually edit order of appearance on home screen somehow as i could do it in standard homescreens in _home.xml file?
frauhottelmann said:
Well then I Only wanted to know if it is possible to do it. But I can live without it. I can look outside to see the weather. You know I made a lot of stuff for the Vox...but I never received ANY donation!!!
Click to expand...
Click to collapse
This is definitely NOT what I wanted to happen here. I worked with Organic M to get this app to work with our phone models and he was nice enough to help us out.
This is far from the thanks that he deserves, since the app is designed for an entirely different model.
Why so serious? can't we all just... get along?
tepss said:
works beatifull. got no issues with any layout (i'm using plain black background). excellent job!
the only question i have is if it is possible to manually edit order of appearance on home screen somehow as i could do it in standard homescreens in _home.xml file?
Click to expand...
Click to collapse
I think the Chome Configurator will allow you to change the order of Slides on your Home Screen.
http://forum.xda-developers.com/showthread.php?t=393104
polarbair said:
Davis,
From your post, it looks like that screen is in ladscape mode. Portrait is taller than wider, yours looks wider than it is taller.
Click to expand...
Click to collapse
I have no idea what you are talking about....
???
As I said I only wanted to know if it is posible nothing more. And I just wanted to clarify that people here are not thankful! I really do apreciate his work. And the work of all the other coders and cookers! I hope you understand my point!
Does this plugin use necessarily the whole width of the screen, or is it possible to customize its size or layout (present conditions, 2-days forecasts, 5-days forecasts...)?
At present I'm using Fizz Weather with Orange plugin on my Wings, in order to show an analoug clock and weather forecasts next to it (see here: http://forum.xda-developers.com/attachment.php?attachmentid=89987&d=1212446950); will it be possible to make the same thing with Chome Weather?
So... is anyone still interested in making this work better with the Vox ? Maybe ask some of your ROM cookers to look at the policies in the registry and ask them remove the restricts that don't allow cab files to copy files to the \windows directory ? Then I wouldn't have to make two separate .cab files when I released a new version That, and if anybody wants to help test the portrait layouts, we can make this happen.
Yes it would be great to see the weather plugin fully working on the Vox...that thing about the restrictions I never understood that because after checking myself the registry many times, I saw that the restrictions were disabled and the thing about installing files in the windows folder still remains a problem...
Does anyone know of a decent freeware WM6.1-compatible picture editor? One that could be used to alter the contrast, brightness and colour of a photo?
I've found that very very few photos can be effectively used as a Home screen background unless they are very dark. The white & grey text become unreadable otherwise.
So ideally I want to darken some pics I have and see if they work better. It'd be nice to be able to do this actually on the phone.
Cheers!
personally i use photoshop..not a freeware..anyway what i wanted to say is that it doesnt need to be "made" for WM6.1...you just need it to be able to resize or crop the image..
TP resolution: width:480 x height:640
Giannis86 said:
personally i use photoshop..not a freeware..anyway what i wanted to say is that it doesnt need to be "made" for WM6.1...you just need it to be able to resize or crop the image..
TP resolution: width:480 x height:640
Click to expand...
Click to collapse
Photoshop isn't freeware. Nor does it run on WM6.1. It's not cropping the image that's the problem - the picture viewer on the TP allows resizing and cropping already.
The problem is altering the brightness, contrast and colours of a photo.
I'm looking to be able to do this on the phone itself, preferably using freeware. I already have Photoshop on my PC.
Hope that makes it a little clearer...
hi,
you can do very simple image changes using:
http://www.xnviewpocket.org/
Hope it helps,
D.
dav3ywrx said:
hi,
you can do very simple image changes using:
http://www.xnviewpocket.org/
Hope it helps,
D.
Click to expand...
Click to collapse
That looks like the baby, thanks, I'll give it a go!
Hmmm, just tried it out. It looks like it has the features I want, but for some reason, whenever I edit a picture, it doesn't save the changes, which is a bit frustrating!
For instance, if I highlight a picture, select Tools > Adjust, I get the screen where I can, for instance, reduce the brightness. Then when I hit the "Adjust" button, it just goes back to the file viewer, and the picture is unaltered.
Most odd!
Jim Coleman said:
Photoshop isn't freeware. Nor does it run on WM6.1. It's not cropping the image that's the problem - the picture viewer on the TP allows resizing and cropping already.
The problem is altering the brightness, contrast and colours of a photo.
I'm looking to be able to do this on the phone itself, preferably using freeware. I already have Photoshop on my PC.
Hope that makes it a little clearer...
Click to expand...
Click to collapse
i know its not freeware that what i said too
i thought you wanted a program that will allow you to make wallpapers, not that it would run on the mobile itself
Have you checked the Diamond section by the way?
Hi Jim,
I've just tried increasing the brightness of an image on my TP with XnView Pocket 1.40 and it seems to work fine. I can adjust the brightness etc and then when I hit the 'Adjust' button a message pops up saying:
The Image xxxxx has been adjusted and and has been saved into xxxxx_m.jpg.
It doesn't alter the original image, it saves the image to an altered file and adds the '_m' to the file name.
I've attached a screen shot of what happens on my TP, are you saying you don't see this screen after you hit the 'Adjust' button?
Cheers,
D.
Hmmm. It wasn't working with a particular picture which was about 8 Megapixels. I cropped it down to about 6 Megapixels in "Pictures & Videos" and then tried again in Xnview and all of a sudden it started working.
Perhaps there is a bug which causes it to fail if the picture is too big?
Actually I think I've sussed the problem - the original file was set to read-only!!! D'oh!
(Would've been nice if the app had reported that though...)
Ah, could be connected to the size of the image. I was using a file that was about 600Kb I must admit. I don't use this often to manipulate images but it is useful to have.
If you're manipulating large images then it may be a task only for your PC.
Cheers & good luck.
D.
I can also use commercial Resco Photo Viewer,but very good freeware editor is UltraG. It is an old-school software with many functions,but a bit complicated,so be patient to use it.
Update 27/11/2009:
I have now made a multi-device version here. It adds landscape support and the text is slightly larger to accommodate devices with smaller screens which I think looks better on the hd2 too.
Old version:
Hi All,
I wasnt very impressed with other 4-wide and 5-wide options, so I just modified the .cpr from my hd2 myself.
This doesnt touch the registry, so wont be much use for non-stock ROMs and other devices unless you edit it yourself:
HKLM\Security\Shell\StartMenu\CustomGridForm = "StartMenuCust"
You will need to soft reset after installing.
Enjoy!
Could you please post some screenshots?
No problem, screenshots added to post 1.
My CustomGridForm is already =StartMenuCust. Should your cabs work on my case (original rom)?
Other question: Did you get your start menu to work on landscape? I've seen some threads about this but I would like to know where to change this on the reg myself. Some apps might have unstable behavior when adding apps to the white list.
Thanks!
If you are already StartMenuCust it should work - I think its only when custom roms start coming out that will change.
I should have mentioned - This is just for portrait. You could change the landscape yourself as it is fairly trivial. Look in \Windows for:
StartMenuCust_480x800.cpr = Portrait
StartMenuCust_800x480.cpr = Landscape
Edit these in notepad (it is just xml). You have to change the row count to 4 and change the relative size of the images, text etc.
Just tried this out .... very effective thanks!!
just a little point, after the install, the black screen offers a Restart button or cancel; on my stock HD2 neither worked, it had frozen. A soft reset got it going again, with a 5-column display
any chance of gettin them in a straght line instead of honeycomb?>
Editing seems to be simple enough. The problem is that my start menu doesn't rotate automatically. I could use gyrator to make it work but I would prefer to use the whitelist or any other reg edit. I avoid using programs that have to be running in the background or tweak my Leo for me, as much as possible. If I reg edit and it doesn't work, I know what I did and can always change it back.
Any idea on how to do this?
Thanks!
pdgpereira:
This thread seems to cover the reg changes you need to make. I havent tried it though!
vinokirk:
Not a clue, sorry!
Armes:
I dont know why it crashed for you. It asks you to restart itself (presumably because it changed a system file) so its installers fault!
Thanks for the link. I had been there but with no previous success. I finally did it. I isolated the reg tweaks made by gsen cab, I think, and added some others. A soup of reg tweaks... The problem with cabs is that you never know what exactly they do. I'll be doing some reg cleaning in the next hour.
Now I will try out these 4/5 columns in landscape.
Thanks guys!
Cab for QVGA
Can you please release a QVGA version?
vinokirk said:
any chance of gettin them in a straght line instead of honeycomb?>
Click to expand...
Click to collapse
I was also wondering this... Maybe setting HexagonGrid="FALSE" in the .cpr files does the trick? Will try it out and let you know.
vdws: I wouldnt recommend touching the HexagonGrid option. Im not really sure what it is for, but if you set it FALSE your start menu wont work anymore. Well, it will, but after a long pause while it changes back to the default WM6.5 grid. You would then need to change the registry value mentioned in post 1.
plvigo said:
Can you please release a QVGA version?
Click to expand...
Click to collapse
I am happy to convert mine to qvga - and tried but its quite hard to judge in the emulator what it looks like. I dont have a qvga device and I cant seem to use the htc fonts in the emulator.
Have you seen:
[Tweak - QVGA] [3-Sept] | 4/5 Portrait | 4/5/6/7 Landscape | Start Menu 6.5
by chris10234?
That looks like it will suit your needs fine. Let me know if you really want my version but i would need you to test it a few times for me!
Looks amazing cant believe i spent the last 4 days without this tweak thanks for doing it before i had to as it was my plan!
Just wish that landscape would auto-rotate on it...
isangelous said:
I am happy to convert mine to qvga - and tried but its quite hard to judge in the emulator what it looks like. I dont have a qvga device and I cant seem to use the htc fonts in the emulator.
Have you seen:
[Tweak - QVGA] [3-Sept] | 4/5 Portrait | 4/5/6/7 Landscape | Start Menu 6.5
by chris10234?
That looks like it will suit your needs fine. Let me know if you really want my version but i would need you to test it a few times for me!
Click to expand...
Click to collapse
Thank you very much for you kind help!
If I want to change it back to original setting, is it just simply uninstall it ?
-----Note------ I had tried it, eveythings back to original by simply uninstall the cab file. Now I am using the 5 items wide, it looks smaller but more tidy than 4 items wide.
Very good and thanks.
Any chance you are going to make some landascape ones?
As i added auto-rotate with bsb-tweaks and now have 5 in portrait and landscape but landscape could much much better...
EDIT: Saw the other thread and if i go for the 5 cab there it will give me 9-wide in landscape, right?
adab: Thats right, uninstalling the .cab should restore the rom default.
chris10230: Yup, I have an updated one here which supports landscape too. For the HD2 WVGA thats 5 portrait and 9 landscape.
Cheers once again!
i've searched everywhere for some nice digital clocks, but everyone creates clocks with some really wierd fonts, or colors that isnt really my taste. So, i made a "concept art" of how a digital clock id like to use look like. (see attachments)
The clock has to be adjustable via CHT (i mean being able to move it around like the normal manila digital clock), so that i can use it in all screens, (Home , all levels, and lockscreen).
Anyone knows if anything like this exists?
if not, anyone willing to make it?
i used the font known as "Segoe UI" (light). Also, if possible, id like some extra versions of it, like the fonts being black instead of white, and an other one with having that black transparent panel behind the clock, using white for the fonts.
PS1:i know that the clock im thinking about looks horrible with the current looks of my phone, but i cant be arsed to change anything until i find a proper clock
PS2: i also know that theres a cab that removes the white panels behind the manila numbers of the clock. The thing is that, without it, the numbers got a little gap between them, looking ugly imo
I basically achieve this by mixing two cabs I've found here in xda
one is called
[Star] Segoe UI light clock charecters White.cab
and the other one is
Transparent Clock flippers.cab
you can find them here on xda posted by their respective authors.
edit: oh I forgot! you can use
transparent clock background.cab to get the effect you want
awesome! thanks a lot for ur reply!
Yeah use my cabs, but you will still get the lines its inevitable when you remove the clock flippers man
ah shame. i thought that ppl let those gaps there, so that the "flip" of the numbers looked better
excellent work with those cabs btw, they were exactly what i needed
I would love a clock like this also. Shame nobody wants to make it without the lines (from the flippers).
Having the lines kills the elegancy of it.
Hi everyone,
I get a solution to fix the problem with the flip lines but you have to be very carefully 'coz it's a bit risky...don't be panic, it works for me perfectly without problem and it would work for you guys too, just follow the instruction
1. Make a backup of the 7c60907d_manila go to your /windows directory and find that file, copy and paste it in your SD card.
2. Download the attached rar. file to your PC, extract the file and save the folder "NoFlipLIne" in your SD card
3. Using Total Commander or File Resco, go to your SD card and open the folder "NoFlipLine" and copy the manila file and paste it into your /Windows directory and accept overwrite (don't worry, you have a backup in case something go wrong)
4. Now reset Sence or restart your phone (as you prefer) and see if you like the magic
Also this manila file has a fix to get installed up to 20 CHT widgets too.
In case of any problem, just find your backed up original file and reinstall it back.
Remember, that works perfectly in my device, but I will not be responsible if it does not work well on yours or cause any other problems, so use it at your own risk
Enjoy it and please let me know if it works well for you.
Your feedback or just a Thanks button clicked is always appreciated.
Thank you for the reply, and your effort.
Unfortunately this did not work. I did exactly as you said, when I restart the phone, I get the original clock, with flippers, but no text where the time is. Basically the time (text) is blank and I just have the original flippers which flipe with nothing inside them.
I don't have screen capture software so I hope you know what I mean. I fyou want a screen print, please link a screen capture app.
I copied the original (backup file) to Windows and all is ok now.
My phone details are as follows:
ROM: 314 WWE (3.14.831.3
Manila: 2.5.20161330.0
WM6.5
Thanks again for trying. Any other suggestions?
ok, this s a little embaressing, I feel like an idiot.
There was no clock text as everything was white. When I mucked around and applied the 'transparent flippers' boom, the clock is just like the pic. PERFECT.
Thanks heaps. I have 'thanked' your post. Good job.
hgalanos said:
ok, this s a little embaressing, I feel like an idiot.
There was no clock text as everything was white. When I mucked around and applied the 'transparent flippers' boom, the clock is just like the pic. PERFECT.
Thanks heaps. I have 'thanked' your post. Good job.
Click to expand...
Click to collapse
Hi Hgalanos,
Please, don't feel like that, it happen to everyone sometimes
I'm glad it works for you too and you get it the way you like it, thanks for your feedback my friend.
Best regards.
hgalanos said:
Thank you for the reply, and your effort.
I don't have screen capture software so I hope you know what I mean. I fyou want a screen print, please link a screen capture app.
Click to expand...
Click to collapse
Hi again my friend,
I forgot to give you a hand with this one too, so here I'm again
For screen capture I use a great app that is very easy to use and works perfectly and with good quality, it is "Shake and Save" which you can find it in this thread: http://forum.xda-developers.com/showthread.php?t=488990
Best regards.
Wow, brilliant app. Thank you x2. For the app, and the clock.
http://gizmodo.com/5734113/i-wish-i-could-run-qlocktwo-app-as-my-iphone-lock-screen
Looks pretty cool. Anyone up for it? Maybe as a widget instead of a lock screen? A full page widget our luck screen. Doesn't really matter...
-Z
zzelinka said:
http://gizmodo.com/5734113/i-wish-i-could-run-qlocktwo-app-as-my-iphone-lock-screen
Looks pretty cool. Anyone up for it? Maybe as a widget instead of a lock screen? A full page widget our luck screen. Doesn't really matter...
-Z
Click to expand...
Click to collapse
I think a Live Wallpaper would be better.
Do you mean something like this?
That looks good. It's a widget, right? What's the name?
Search market for wordclock, there are widgets and livewallpapers
It's my widget - One More Clock. However, I'm in the middle of a rewrite (from XML to JSON) and this theme is using the new format.
Here, use this apk and pick the "Clock Too" theme... it defaults to 4x2 but you can resize to any size you want if you have launcherPro/ADW.
Leave me feedback so I can incorporate them into the next version of OMC!
Definitely need a lockscreen AND a livewallpaper of the one at Gizmodo. It's pretty awesome.
@PhilDsT: Searched according to your suggestion but couldn't find anything that looks really like the Qlocktwo. Only more or less "ugly" copies.
@xaffron: Thanks alot! After changing the background color to black, it looks almost like the original! And I now think that this is better as widget instead as LWP, because if it's an LWP, you could hardly read the time depending on how the desktop is arranged. So yes, this is really great!
What I notice on my Dell Streak is that loading the widget takes quite a long time (something like 15 seconds or so) after unlocking. Not really an issue for me, but maybe interesting for you.
If I may, I'd like to ask one question: Do you think you could also add a german version? The letter layout would need to look like on the real Qlocktwo as seen here. I would of course help you with a translation matrix if required.
Many TIA!
Thanks for the feedback, BigBlue007! Turn on Foreground Mode for now for best responsiveness. I'm working on the part that gives faster updates on screen-on.
Here's the German version. I've been telling anyone who would listen that OMC skins well, so might as well put my money where my mouth is
Unzip to your SD Card, under the /OMC directory (so that it is /OMC/Clock2German).
the Clock2 German theme will now be available. I don't know German so this is just a guess - let me know what to tweak!
Cool! Thanks alot! Will check it right now and will come back to you with corrective suggestions if there are any.
OK, first of all, the letter matrix is 100% correct. F*cking awesome mate! Thanks again!
Now for the first correction: The current time right now would read as:
"ES IST VIERTEL VOR EINS"
What's missing is the "S" at the end of the word "EINS" (which is "ONE"). The "S" is there, but it's not lit.
edit: I took a look into the .json file and I think I am able to fix it myself my replacing the two occurances of "E I N" in lines 479 and 491 by "E I N S". From what I can see in that file, everything else should be correct.
edit2: Yes, modifying the .json file had the desired effect.
Enabling the foreground option does indeed solve the issue that it took long for the widget to redraw after unlock. What still take some time is redrawing it after changing from portrait to landscape mode or vice versa. But I'm sure this will be sorted out during the further development, and as said it's not really a big deal for me.
After looking into that .json file, I would say that I might indeed had been able to create a german version myself, so sorry for bothering you with that...
Thanks, glad you figured out the JSON yourself! Other languages should be pretty simple as well.
I'll change the theme and upload a new version once I get a few minutes.
Corrected Clock2German
Here's a fixed Clock2German theme.
- Changed default slate color from green to black.
- Fixed position of ZEHN and FUNF.
- Cleaned up overlay glass.
Just found OMC, and when flipping through the themes my yaw dropped at "Clock Too". AWESOME!!!!! My new favorite