Related
I have been using 2.3.5 with the new radio, I have more bars and sometimes I get better speeds but I lose more frequently my 3g and keeps bouncing 3g/1x, my wifi sucks but I don't use it a lot and 4g, I don't have here in my area.
Have the same problem since I moved to 2.3.5 and so have moved back to a rom that uses 2.3.4 (Oxygen 2.1.6).
Is the wifi/3g trouble due to the radio? If yes, anyone knows how I can use a newer rom with an older radio?
Thanks
Paparasee said:
Have the same problem since I moved to 2.3.5 and so have moved back to a rom that uses 2.3.4 (Oxygen 2.1.6).
Is the wifi/3g trouble due to the radio? If yes, anyone knows how I can use a newer rom with an older radio?
Thanks
Click to expand...
Click to collapse
Flash the rom first then apply the radio.
I have been using the old radio for a day and now I don't have a problem with the wifi and the 3g works the same, like crap, so I am going to keep the old radio with this one 2.3.5 rom http://forum.xda-developers.com/showthread.php?t=1205936 , for couples days and see. 3g in Sprint sucks!
Mainly for Canadians.
If you want to use it on I727R with ICS Rom. please ONLY flash the base file (no RIL).
http://dl.dropbox.com/u/4333782/Bell_Note_Base.zip
If you want to try it on different gingerbread flavors, you can flash the one with RIL. DO NOT flash this one on ICS, otherwise you will not get signal.
http://dl.dropbox.com/u/4333782/Bell_Note_Base_RIL.zip
After you flash the radio file, ICS may not identify the baseband properly(from About Phone). On GB TPC v3 can detect the baseband properly though.
LeeC said:
Mainly for Canadians.
If you want to use it on I727R with ICS Rom. please ONLY flash the base file (no RIL).
http://dl.dropbox.com/u/4333782/Bell_Note_Base.zip
If you want to try it on different gingerbread flavors, you can flash the one with RIL. DO NOT flash this one on ICS, otherwise you will not get signal.
http://dl.dropbox.com/u/4333782/Bell_Note_Base_RIL.zip
After you flash the radio file, ICS may not identify the baseband properly(from About Phone). On GB TPC v3 can detect the baseband properly though.
Click to expand...
Click to collapse
I flashed the Rogers no RIL, works great, better bars, however how damaging it to have unknown baseband?
not damaging at all, the rom will merely identify baseband as "unknown," as u said.
Im curious to know how much better this modem performa compared to the UCALC4. I had problems flashing it before, but once i got it to stick performance has been great, receptions is better and speed on par with UCLA3. Can other rogers users with LTE weigh in on this? Preferably those in the GTA and Vancouver.
does the resolve the unknown caller issue
Hey gey just here to give my feedback about this modem. (I live in GTA)
Personally, I've experienced slower data speeds and bars of reception with this modem as compared to the UCALC4 modem.
On this modem (no ril) I acquired about 20 mbps down and 8 up where as with the UCALC4 modem, I experienced about 26 mbps and 13 up.
Also, with the no ril modem, I was receiving 3 bars while on the UCALC4, I was receiving 4 bars.
maybe because it is a bell modem and rogers will release their own?
I made this for some users can try to use Bell's dual channel HSPA+ as y2whisper advised. For LTE it may not as good as rogers or UCLA4.
LeeC said:
I made this for some users can try to use Bell's dual channel HSPA+ as y2whisper advised. For LTE it may not as good as rogers or UCLA4.
Click to expand...
Click to collapse
but to be honest im running 4g which is another 3g+ and i didn't see any difference but my battery was going upside down lol..as far as ucalc4 once it settles, its wayy better then then RUKJ7 that we have with rogers..
for me its helpful since i am using the device on bell. and well i don't have the same coverage with bell as you do with rogers for LTE. so figured why not get the best hspa+ speeds as i can get.
(never noticed you were from brampton before)
Has anyone tried flashong the UCLA3 modem on ICS ROMs?
Sent from my SGH-I727R using XDA
cue_32 said:
Has anyone tried flashong the UCLA3 modem on ICS ROMs?
Sent from my SGH-I727R using XDA
Click to expand...
Click to collapse
I tried UCLA3 on ICS yesterday because I can't get LTE on UCALC4. Anyway, it doesn't work. It gives no signal and under 'about phone' it says unknown baseband.
did u try the ics specific one leeC posted?
My mistake, I didn't flash the ICS specific UCLA3. Didn't know of it. Flashed the GB one (no signal) -then flashed back to UCALC4 radio. Ill try ICS UCLA3 soon (it would sure help if someone could post the link so I know for sure)
UCALC4 doesn't seem to be working too well for me. I get LTE very rarely for few seconds at a time only, but mostly not. I always had LTE before though.
I see this Bell Radio works on Rogers i727R. I have not tried it yet myself. I am on TCP v3 still, and looking to try a ICS rom with a new radio, but I am trying to find the Rogers radio in case I want to revert to gb ? Any thoughts ? this is the only radio post i see in the thread, thanks
This thread is actually in the wrong section, general or even dev section would have been better, but I digress.
Flash kj7 radio from this thread if u need rogers radio:
http://forum.xda-developers.com/showthread.php?t=1384865
icenight89 said:
This thread is actually in the wrong section, general or even dev section would have been better, but I digress.
Flash kj7 radio from this thread if u need rogers radio:
http://forum.xda-developers.com/showthread.php?t=1384865
Click to expand...
Click to collapse
Much appreciated ! Thank you !
If you are an owner of brazilian P920H (Claro), your problems are solved.
- No more signal problem!
- Stay on H !!!
- No ghost calls
After install any rom based on P920 (european O3D), just copy the three files that are inside the zip (attached bellow) to "/system/lib" and then you must flash baseband, that are inside the zip too, with smartflash.
Dont forget to change the permissions of those three files to 644.
Those files are RIL from V20A - Latest brazilian version.
The baseband is V20A too.
This should be in the general section.
Sent from my LG-P920 using Tapatalk 2
i have baseband LGP920hAT-V20a-DEC-22-2011 in my lg now.... i've already installed V20B, 20C... and now i am with this version of 20A, my phone is TIM... do i have to reinstall V20a baseband u put in this attachment????
and how do i do a smartflash??? i just kdz files untill now...
Only for Claro? What about Tim?
Sent from my LG-P920 using xda premium
vitorcruzbr said:
Only for Claro? What about Tim?
Sent from my LG-P920 using xda premium
Click to expand...
Click to collapse
You should take those three files from tim stock rom and replace on your installed P920 modded rom.
You can use baseband V20A.
Sent from my LG-P920 using XDA
azhhael said:
i have baseband LGP920hAT-V20a-DEC-22-2011 in my lg now.... i've already installed V20B, 20C... and now i am with this version of 20A, my phone is TIM... do i have to reinstall V20a baseband u put in this attachment????
and how do i do a smartflash??? i just kdz files untill now...
Click to expand...
Click to collapse
If youre in stock rom, you dont need to do anything.
If you have a modded rom installed, you should do what ive explained on last post.
If baseband is V20A already, you dont need to reinstall. Just replace those .so files.
Sent from my LG-P920 using XDA
I had no network when I flashed the 21e Baseband, do you know if its compatible with a 21e ROM? 'Cause I really loved samno's Prometheus Project
IF SOMEONE COULD PLEEEASE GIVE ME THE FILES FROM THE STOCK ROM FOR TIM, the only one I found here is froyo and it is on Fileserve.
Thanks!
vitorcruzbr said:
I had no network when I flashed the 21e Baseband, do you know if its compatible with a 21e ROM? 'Cause I really loved samno's Prometheus Project
IF SOMEONE COULD PLEEEASE GIVE ME THE FILES FROM THE STOCK ROM FOR TIM, the only one I found here is froyo and it is on Fileserve.
Thanks!
Click to expand...
Click to collapse
the base band 20a is not comatible with 20P and 21E ROMS.
20a is compatible with = 21a,b,c and 21D ROMS
I think you made a mistake. Im using Dna 3.3.3, which is V21E, with baseband and ril V20A.
Sent from my LG-P920 using XDA
guillefs said:
the base band 20a is not comatible with 20P and 21E ROMS.
20a is compatible with = 21a,b,c and 21D ROMS
Click to expand...
Click to collapse
Yes, I was on 21D ROM with 21a Baseband - not so bad, had only a few ghost calls in 3 months almost, then I flashed the 21E baseband and a 21E ROM, does it lack the frequencies we use in brazil or what?
I'm using prometheus project 1,3 with modded kernel 1.2, baseband 21e
Chugging along happily with claro (well as happy as I can be with their ****ty 3g speeds and coverage )
EDIT: After using getril... it seems that i am in v20a, after all, going to follow your guide tomorrow
guillefs said:
the base band 20a is not comatible with 20P and 21E ROMS.
20a is compatible with = 21a,b,c and 21D ROMS
Click to expand...
Click to collapse
I only have Brazilian V20A Retail ...
I'm uploading it. When upload finishes, i'll attach it to first post.
Lg su760 ics
tiagoclc said:
If you are an owner of brazilian P920H (Claro), your problems are solved.
- No more signal problem!
- Stay on H !!!
- No ghost calls
After install any rom based on P920 (european O3D), just copy the three files that are inside the zip (attached bellow) to "/system/lib" and then you must flash baseband, that are inside the zip too, with smartflash.
Dont forget to change the permissions of those three files to 644.
Those files are RIL from V20A - Latest brazilian version.
The baseband is V20A too.
Click to expand...
Click to collapse
hi,
my lg su760 Korean T symbol is working fine in Bangladesh except data speed problem by gprs/edge only?
what should i do? change my baseband or OS? please suggest me. my gprs speed limit is 12.6 kbps only.
Others all are ok.
IS your baseband will work on this phone? plz?
my mobile info are:
Android ver 4.0.4
baseband XMM6260
karnel 3.0.21
build number ICS
Software ver LGSU760-V30b-OCT-18-2012
thanks.
raselahmed said:
hi,
my lg su760 Korean T symbol is working fine in Bangladesh except data speed problem by gprs/edge only?
what should i do? change my baseband or OS? please suggest me. my gprs speed limit is 12.6 kbps only.
Others all are ok.
IS your baseband will work on this phone? plz?
my mobile info are:
Android ver 4.0.4
baseband XMM6260
karnel 3.0.21
build number ICS
Software ver LGSU760-V30b-OCT-18-2012
thanks.
Click to expand...
Click to collapse
Try 18A baseband.. work fine in my O3D
Sent from my LG-SU760 using xda app-developers app
I have v20a on 2 years, works fine in all ROMs custom ou port ! With claro DDD 17 ! One problem.. 3g is very slow! This problem ocurred on brazil but in paraguay or Argentina works fine and very fast !
Enviado de meu LG-SU760 usando o Tapatalk 2
tiagoclc said:
If you are an owner of brazilian P920H (Claro), your problems are solved.
- No more signal problem!
- Stay on H !!!
- No ghost calls
After install any rom based on P920 (european O3D), just copy the three files that are inside the zip (attached bellow) to "/system/lib" and then you must flash baseband, that are inside the zip too, with smartflash.
Dont forget to change the permissions of those three files to 644.
Those files are RIL from V20A - Latest brazilian version.
The baseband is V20A too.
Click to expand...
Click to collapse
I tried that several times, I flashed my P920h with V30a from P920, then i copy the 3 files, change permissions, then flash fls file, then it shows an error message, it says "Morningcall cannot be verified"
Help please!
Try to flash the fls file and not change those 3 files. Its for GB roms.
Sent from my LG-P920 using xda app-developers app
I'm on following on an unlocked I-727 Skyrocket
Android Version 4.0.4
Baseband Version 1727UCLF5
Kernel Version 3.0.8
Build Number IMM76D.UCLF5
But I'm getting Edge 2. Any ideas how to get 4G etc.?
Just an FYI - When I try to flash Blaze_4G_LB7_ICS_Radio, it makes my IMEI null....
Please advise
Or in other words...
What is the best combination of ROM/Radio/Kernel etc. for I727 to work perfect with T Mobile?
I have read a lot of threds but I'm confused.
Please help.
Thanks in advance!!
Installed NexusMod ICS 2 Zero - Got Edge 2
Installed Blaze 4G ICS on top of it - Baseband comes as Unknown; Get H+ icon but upload/download speed sucks.... :-(((
http://forum.xda-developers.com/showthread.php?t=1605105&page=4
Any advise...
Sky ics on tmoble working fine
supernez said:
Installed NexusMod ICS 2 Zero - Got Edge 2
Installed Blaze 4G ICS on top of it - Baseband comes as Unknown; Get H+ icon but upload/download speed sucks.... :-(((
http://forum.xda-developers.com/showthread.php?t=1605105&page=4
Any advise...
Click to expand...
Click to collapse
Hello i installed Sky ics and all worked fine:good:
http://forum.xda-developers.com/showthread.php?t=1653022
video
http://youtu.be/Nijl9ohZi80
I have to bump this up. Have same question. What is a stable combination for T-mobile on the skyrocket. I've tried various kernels, sky, dag.. Also different roms, gb or ics. I've been on embryo with kj3 for a while now, and i get fine edge, but 4g is shown when connected to hspa, and I'll get extremely unresponsive data (takes 5 sec to start transferring data) with about 1mbit down max, but literally no upload. Any help would be greatly appreciated.
So I've got Cyanogenmod 9 stable running on my SGH-I727 Skyrocket, rooted and unlocked of course, but I can't find any steps on flashing the radio. I've been searching for a couple hours. Anyone know the process? I've downloaded a radio from here:
http://forum.xda-developers.com/showthread.php?t=1507825
But I just am not sure the process, do you just boot into Clockworkmod Recovery and install the zip? Thanks for any help! Edge speed sucks and that is all I have right now.
You flash it just like you flash anything else. Just wipe cache and dalvic.
Sent from my SAMSUNG-SGH-I957 using xda app-developers app
Grntrenchman said:
I have to bump this up. Have same question. What is a stable combination for T-mobile on the skyrocket. I've tried various kernels, sky, dag.. Also different roms, gb or ics. I've been on embryo with kj3 for a while now, and i get fine edge, but 4g is shown when connected to hspa, and I'll get extremely unresponsive data (takes 5 sec to start transferring data) with about 1mbit down max, but literally no upload. Any help would be greatly appreciated.
Click to expand...
Click to collapse
Certain radios are supposedly for different locations but I'm not sure about that. I'm currently in NYC and I have the Sky ICS 4.2F6-3.0 ROM with the regular 3.0.8 kernel. My first speed test results were horrid--30 kB/s down & <4kB/s up. I flashed numerous radios (make sure the rils file isn't in the zip before flashing) and right now I've settled on the UVLH1 radio. I was getting over 150 kB/s in October, but I think the changes to T-Mobile's network are responsible for my current speeds of 700 to >1400 kB/s up & 200 to >300 kB/s up.
The IMEI and IMEISV shows up as well with the UVLH1 radio. You display a large At&t 4G icon on the top though. You could also just download all of the radios and just flash one at a time.
I have a 727r and I want to use it on wind, and have no idea what combo of rom / kernal / modem to use. what I do know:
The 727r radio has the ability to pick up the signal
The wind network uses HSPA+ - transmit on 1700, receive on 2100
There are modem files out there for these frequencies
Things I don't know
How to make sure a rom / kernel / radio will work with each other (hopefully without needing to spend hours flashing n! combinations)
How to figure out if a modem file will support my device, or the frequencies I need
Things I've tried
the 989 from Tmobile runs on HSPA+, so I tried installing a tmobo rom, kernel, and radio with little success.
Trying to install / flash different rom - kernel - modem combos (most of which results in baseband version:unknown - this means the modem and rom are incompatible right?)
What I'm asking
Is there anyone running a 727r on wind that wouldn't mind sharing their rom / kernel / modem combo?
Has anyone found a Cyanogen-kernel-modem combo that works?
I am NOT asking which is the "best". After spending 4 hours of flashing and praying things will work, I don't care if I get the "worst" rom. I just want a combo that works
WORKING(more or less) COMBOS:
R34P3ReX_T989_Skyrocket_Conversion - Juggernaut_50_0218 - Tmo_SGH-T989_KID_radio
Gingerbread base, gyroscope tilts screen wrong way, a bit buggy, but works
CM10, CM10, T989UVLH1
Works well enough, having Call issues though. Going to try a new radio
Cyanogen always gets terrible battery. Going to look for an optimized version but not a problem for me
CM10, Blaze 4G UVLH5
Calling worked, I could hear caller, but they heard a lot of garbled blarky. Not good
u don't need a specific ROM or kernel at all, all u need to do is try different t radios. try the uvle1 from the t989 aka Hercules subsection, and give the modem someone dumped from the i757m bell version to see if u can catch a signal. I strongly believe the later will work
pileot said:
I have a 727r and I want to use it on wind, and have no idea what combo of rom / kernal / modem to use. what I do know:
The 727r radio has the ability to pick up the signal
The wind network uses HSPA+ - transmit on 1700, receive on 2100
There are modem files out there for these frequencies
Things I don't know
How to make sure a rom / kernel / radio will work with each other (hopefully without needing to spend hours flashing n! combinations)
How to figure out if a modem file will support my device, or the frequencies I need
Things I've tried
the 989 from Tmobile runs on HSPA+, so I tried installing a tmobo rom, kernel, and radio with little success.
Trying to install / flash different rom - kernel - modem combos (most of which results in baseband version:unknown - this means the modem and rom are incompatible right?)
What I'm asking
Is there anyone running a 727r on wind that wouldn't mind sharing their rom / kernel / modem combo?
Has anyone found a Cyanogen-kernel-modem combo that works?
I am NOT asking which is the "best". After spending 4 hours of flashing and praying things will work, I don't care if I get the "worst" rom. I just want a combo that works
Click to expand...
Click to collapse
So.. im using the Tmo Radio.. the latests and you can get it here: http://forum.xda-developers.com/showthread.php?t=1895400
and as for the ROM i am using Cyanogenmod 10.0 but the T989 version.
works good.. dont forget to wipe everything.. as for the other comment where you just need to flash the radio.. dunno.. i tried that a couple of times and it didnt work.. however.. im about to try it again.. so ill let you know how it goes.. for now though.. just to get it working.. i would do the above..
tip: i initially flashed the UVLH1 radio.. worked great.. great signal.. then i updated the other day to the latest.. and it seems as though my signal is not as strong.. dunno.. but try it out.. you never know..
also.. on initial boot up.. you need to give it a couple of minutes for things to settle.. it should pick up the Wind signal by itself... if it doesnt after 5 mins.. then do a search.. but you shouldnt have a problem..
So.. i can confirm that you CAN install the TMO radio and the ATT Skyrocket CM 10 ROM!!!!!
Infact... it works great!!!
TIP: i can also confirm that the UVLH1 has a stronger signal than the UVLI4 radio which is the latest. not sure why.. but i reverted back to UVLH1
hope this helps!
df186 said:
So.. i can confirm that you CAN install the TMO radio and the ATT Skyrocket CM 10 ROM!!!!!
Infact... it works great!!!
TIP: i can also confirm that the UVLH1 has a stronger signal than the UVLI4 radio which is the latest. not sure why.. but i reverted back to UVLH1
hope this helps!
Click to expand...
Click to collapse
I have ROGERS_ICS_ULFX3 stock rom installed, baseband T989UVLH1, I flashed it and i get no sim error
Just before this on Stock gingerbread i had gotten it to work, but after 1 restart, everything got screwed up
Help me
I have been running SkyJB 4.1.2, and Blaze LB7 in Southern Ontario, picking up Wind signals. Speeds are okay, still trying to find the best combo, but that combo works.
kr4tos said:
I have ROGERS_ICS_ULFX3 stock rom installed, baseband T989UVLH1, I flashed it and i get no sim error
Just before this on Stock gingerbread i had gotten it to work, but after 1 restart, everything got screwed up
Help me
Click to expand...
Click to collapse
flash the radio twice,no cable plugged in before flashing rom, might help
df186 said:
So.. im using the Tmo Radio.. the latests and you can get it here: http://forum.xda-developers.com/showthread.php?t=1895400
and as for the ROM i am using Cyanogenmod 10.0 but the T989 version.
works good.. dont forget to wipe everything.. as for the other comment where you just need to flash the radio.. dunno.. i tried that a couple of times and it didnt work.. however.. im about to try it again.. so ill let you know how it goes.. for now though.. just to get it working.. i would do the above..
tip: i initially flashed the UVLH1 radio.. worked great.. great signal.. then i updated the other day to the latest.. and it seems as though my signal is not as strong.. dunno.. but try it out.. you never know..
also.. on initial boot up.. you need to give it a couple of minutes for things to settle.. it should pick up the Wind signal by itself... if it doesnt after 5 mins.. then do a search.. but you shouldnt have a problem..
Click to expand...
Click to collapse
I tried to install the T989 (Hercules) CM10 version but it kept failing to install
The recovery I'm using is Team Win Recovery, if that matters. I suspect either TWRP is not working or the Kernel is incompatible
What Kernel are you using?
pileot said:
I tried to install the T989 (Hercules) CM10 version but it kept failing to install
The recovery I'm using is Team Win Recovery, if that matters. I suspect either TWRP is not working or the Kernel is incompatible
What Kernel are you using?
Click to expand...
Click to collapse
if it was built for t989 specific phones it wont install because of the assert
u dont need a t989 rom anyways, but if you want to try them out make sure the updater script doesnt have the assert function and do the rotation fix
I'm using the i727r (Rogers) running CM 10.1. I'm still on Rogers using the stock radio for now. Is there any consensus as to which radio file to flash for best results?
I know this thread is a little stale, but I figured I would throw in my two cents.
I have an i727r, unlocked. Right now I am running PACman Rom (http://forum.xda-developers.com/showthread.php?t=2178402) with the Blaze LB7 radio (4th from the bottom here: http://forum.xda-developers.com/showthread.php?t=1895400). They said I shouldn't be able to run an ICS radio with a JB Rom, but somehow it seems to be working. Note that the radio was on there before flashing PACman.
The kernel showing up in my phone info is the one that came with the PACman Rom, 3.0.72-cyanogenmod. I know this because before flashing PACman over stock, the kernel was 3.0.8.
Having said all that I'm thinking about updating my radio, probably to UVMB1. I'm not sure if I should bother though. I have a Nexus S, which is designed as an AWS phone out of the factory, and when I put my SIM card in that phone, the speedtest results are the same as what I'm getting right now with the LB7 radio on the Skyrocket. So I'm not sure I'd gain much by updating. :/
Can some people in the GTA please chime in to help me.
I am using a Rogers Skyrocket.
SlimBean Rom 4.2.2 Official 7
T989UVMC6 radio/modem
I tried a few other modems and found this one to be the most stable as some did not even allow a call to be made.
This is what I noticed.
Full charge I talked for 20 minutes and lost 10% battery (from full charge)
I get erratic data speeds inside=500-1 and outside I get 3
The problem is the battery drain and signal strength.
What are you using and what is your battery life and signal strength?
Data speeds?
your location?
droiduzr2 said:
Can some people in the GTA please chime in to help me.
I am using a Rogers Skyrocket.
SlimBean Rom 4.2.2 Official 7
T989UVMC6 radio/modem
I tried a few other modems and found this one to be the most stable as some did not even allow a call to be made.
This is what I noticed.
Full charge I talked for 20 minutes and lost 10% battery (from full charge)
I get erratic data speeds inside=500-1 and outside I get 3
The problem is the battery drain and signal strength.
What are you using and what is your battery life and signal strength?
Data speeds?
your location?
Click to expand...
Click to collapse
My carrier is videotron, one of the most difficult carriers to get unlocked phones to work on. Here's what works for me, sim unlocked, rooted. Running cyanogenmod 10.1.0 RC2 with Blaze 4G LF4 radio, nobars battery saver and network booster. I'm still have the same issue as everyone else, baseband unknown and network type unknown. I've been running the stock kernel and I've been running like this for the past couple days, and touch wood, I haven't had any issues. I've tried the 2 Tmo radios, I got no signal what-so-ever, the telus radio kept dropping my connection, meaning, I would have to try and resend text messages several times before it would actually send. Now that I'm using my current setup, as described at the beginning of my post, no problems to date.
I hope my input helps out.
wraith79 said:
My carrier is videotron, one of the most difficult carriers to get unlocked phones to work on. Here's what works for me, sim unlocked, rooted. Running cyanogenmod 10.1.0 RC2 with Blaze 4G LF4 radio, nobars battery saver and network booster. I'm still have the same issue as everyone else, baseband unknown and network type unknown. I've been running the stock kernel and I've been running like this for the past couple days, and touch wood, I haven't had any issues. I've tried the 2 Tmo radios, I got no signal what-so-ever, the telus radio kept dropping my connection, meaning, I would have to try and resend text messages several times before it would actually send. Now that I'm using my current setup, as described at the beginning of my post, no problems to date.
I hope my input helps out.
Click to expand...
Click to collapse
Ur input doesn't really help... 10.1 REQUIRES ucmc1 or ruxau7 , neither of which ur using. Try one of those radios and then post results
Edited: UVMB1 as well
icenight89 said:
Ur input doesn't really help... 10.1 REQUIRES ucmc1 or ruxau7 , neither of which ur using. Try one of those radios and then post results
Click to expand...
Click to collapse
Well, if it NEEDS ucmc1 or ruxau7, why have I been running this setup for the past month with no issues!?
wraith79 said:
Well, if it NEEDS ucmc1 or ruxau7, why have I been running this setup for the past month with no issues!?
Click to expand...
Click to collapse
You will, or already have had issues you're not aware of.
Sent from my SAMSUNG-SGH-I727 using Tapatalk 4
wraith79 said:
Well, if it NEEDS ucmc1 or ruxau7, why have I been running this setup for the past month with no issues!?
Click to expand...
Click to collapse
Edited, UVMB1, the NEW Blaze 4G radio from this thread seems to work as well:
http://forum.xda-developers.com/showthread.php?t=1895400
But like x said, u had issues u just weren't aware of them. Problems don't just APPEAR for no reason.
this threads getting confusing.
ucmc1 and uxuma7 is for rogers and att users on cm10.1
if using unlocked skyrocket for other carriers then you would need compatible jb radio for the new/unlocked carrier for cm10.1 based roms
so for tmo/wind etc you would need UVMB1 for the AWS bands, there are other jb radios for telus, bell but don't know if/how well they work on said carrier.
so if your carrier uses the same frequency's as tmo then UVMB1 seems to be what users are reporting success with.
if your carrier is using same frequency as att/rogers then the ucmc1 or uxuma7 radio is what you need
correct me if im wrong
^^^ this is exactly what I said except in a more detailed explanation .
icenight89 said:
^^^ this is exactly what I said except in a more detailed explanation .
Click to expand...
Click to collapse
good, i just needed a confirmation so i can add that info and a link to this post in the radio section of the 1stop sticky