Assuming you are using your TF sans dock.....
the only slots you have are mini HDMI and Micro SD.
Are there such things as mini-HDMI and Micro SD adaptors to USB which would allow use of thumb drives?
Alternative methods of file transfer? - Bluetooth? WiFi P2P?
there will be a dock to usb connector in the future (like apple connection kit)
Related
I found a pretty cheap USB female to Micro USB male adapter online and was wondering if it was possible to use that and connect a flash drive to the phone's Micro USB female port. Would the phone be able to read the flash stove's content with an app like Astro? Thanks.
Probably not. That would require USB Host mode, which was just announced to be a part of Android 3.1. Even then I'm not sure external drives will be supported.
I know there is a hack for it to be enabled, and I know that Honeycomb 3.1 has this built-in, but I want to make sure that it comes on the XOOM before I buy it. Meaning, can I get a Micro-USB to USB adapter and use things like USB Mouse and flash drive?
USB host is native to Honeycomb 3.1. You will need a USB host cable or the Motorola camera connection cable. Most adapters do not have all 5 pins wired out to enable host mode recognition from the xoom. But yes, it works out of the box.
It wont work out of the box to read thumb drives. It will read mice cameras keyboards.
You have to root to read external thumb drives and hard drives.
Rooting is on my todo list anyway.
Hi All,
I have seen many posts regarding using external HDDs asking which ones work and which ones don’t. So I thought I would share my experience which I think (hope) would cover most situations and answer most questions.
This is what I used:
1. 1TB 3.5”external HDD USB 2.0 with its own power supply (like mostly all 3.5”external drives need their own power supply)
2. 500GB 2.5”Seagate Caviar Blue external USB 2.0 HDD. Runs fine on a standard PC/laptop USB port without any extra power supply
3. 128GB 2.5”Crucial SSD in an external USB 3.0 HDD enclosure. Runs fine on a standard PC/laptop USB port without any extra power supply.
4. 256 GB 1.8”Samsung S1 external HDD USB 2.0. Runs fine on a standard PC/laptop USB port without any extra power supply. A 1.8”HDD is often used in a HDD MP3 player like the classic IPod.
I have used the above using the original Samsung Note 10.1 USB Connector kit, so I can’t make comments regarding other connector kits.
I also use the Paragon NTFS&HFS+ app from the Google Play Store to be able to mount the HDD which were all formatted in NTFS. Without this app I could not mount the HDDs.
My Results:
1. The 1TB 3.5”external HDD connected directly to the USB adaptor and runs fine using its own power supply.
2. The 500GB 2.5”Seagate Caviar Blue external HDD connected directly to the USB adapter did not work. The Note 10.1 produced the error “High powered device”. However when connected via a powered USB hub (i.e. with extra external power supply), then this HDD worked fine.
3. The 128GB 2.5”Crucial SSD in an external USB 3.0 HDD enclosure connected directly to the USB adapter did not work. The Note 10.1 produced the error “High powered device”. However when connected via a powered USB hub (i.e. with extra external power supply), then this HDD worked fine.
4. 256 GB 1.8”Samsung S1 external HDD USB 2.0 connected directly to the USB adapter did work. It appears these 1.8” HDDs are considered “low power” and it did work directly connected to the USB adapter. This also makes sense as these HDDs are used in many MP3 HDD players and could have a low power requirement.
Summary:
I have used 3.5” and 2.5” HDDs/SSDs with USB 2.0 and 3.0 interfaces, and I could get them all to work either directly or with an extra powered USB hub. Using a powered USB hub is a pain but at least it works.
Hope this helps in answering peoples questions whether it is possible to connect external HDDs.
Good stuff...thanks.
You need to use a USB splitter cable and connect the portable drives to an external power source. I do it all the time with my 750GB Seagate 2.5'" drive on the go. I have a portable battery with 2 USB sockets. The external battery provides power.
Besides, this has been discussed at length here and is no secret.
I'll stick to my wireless Seagate 500gb HDD... And when I have time to mod it, I'll make it either 1 or 2 TB....
Think I need a mini HDMI to HDMI cable, a Micro USB OTG adapter and I should be sorted. Optionally could add a USB hub to allow me to use a USB to Ethernet adapter and a couple of other USB devices (such as a keyboard, mouse).
blah
Can the Fujitsu F-07C'S Micro USB connection be used for data transfers, for example with a Micro USB to USB A adapter?
Thanks