[Q] [SOLVED]Tethering TO Asus Transformer - Eee Pad Transformer Q&A, Help & Troubleshooting

I tried to tether to the Asus Transformer from a 3g IPad using both PDANet and My Wifi 4.0. In each case the Transformer was not able to detect the generated wifi network.
I was able to connect a Windows 7 phone and an IPhone 4 to the same generated wifi hotspots with no problem.
The hotspot wifi ssid was never listed among available wifi networks.
Any ideas as to what could be the problem?
EDIT: SUCCESS!
Finally tethering TO my Transformer from my IPad- though this should work with any phone.
Steps:
1) First have to Root.
This has now been made simple through this post:
http://forum.xda-developers.com/show....php?t=1125714
2) Learn how to ADB
http://forum.xda-developers.com/show....php?t=1071584
But important note is that you don't have to go through all the Android SDK installation. The download that you obtain in step 1 will include everything you need to ADB. One of the folders included in the download is root_app. Within it are all the files you need to ADB.
But the guide to ADB is a good read to teach you how to use ADB.
3) Use guide to install and modify wpa_supplicant
Guide: http://forum.xda-developers.com/show...php?p=14089118
Now that you are rooted and have basic ADB knowledge, getting the instructions on this guide to work is easy.
4) On the IPad 3g end either MyWi 4 or PDANet will enable tethering on your jailbroken IPad.
Enjoy my fellow newbies!

The connection created is adhoc, and the stock transformer isn't compatible with that. Try using Bluetooth tethering, or update your iPad to the latest ios firmware. Some people have enabled adhoc on the transformer as well.

rcm_rx7 said:
The connection created is adhoc, and the stock transformer isn't compatible with that. Try using Bluetooth tethering, or update your iPad to the latest ios firmware. Some people have enabled adhoc on the transformer as well.
Click to expand...
Click to collapse
Any idea how to enable adhoc on the transformer?
I didn't think IPhone 4 connected via adhoc on My Wi 4 but could be mistaken.
I really would like to be able to share my IPad's 3g with my transformer.

As rcm_rx7 says "use Bluetooth". I'm sharing my iphone 3G signal now using MyWi 4.0 with no issues.

SmithersJ0nes said:
As rcm_rx7 says "use Bluetooth". I'm sharing my iphone 3G signal now using MyWi 4.0 with no issues.
Click to expand...
Click to collapse
Smithers: I can't seem to get bluetooth to work. I know I'm doing something wrong. My IPad is on 4.3.1 and latest My Wi.
The devices are paired for sure and I have mywi on the bluetooth setting but I can't surf on the Transformer (no signal).
Can you please run through the steps to get it to work?
Wifi definitely doesn't work at all.

Eyedoctor2 said:
Smithers: I can't seem to get bluetooth to work. I know I'm doing something wrong. My IPad is on 4.3.1 and latest My Wi.
The devices are paired for sure and I have mywi on the bluetooth setting but I can't surf on the Transformer (no signal).
Can you please run through the steps to get it to work?
Wifi definitely doesn't work at all.
Click to expand...
Click to collapse
I don't have an iPad, but I am able to have my Transformer tether to my Droid X no problem. I can give you the steps I use for that, I'm sure you could generalize it pretty easily to the iPad.
1) On Phone and Transformer: Settings > Wireless & networks > Enable Bluetooth
2) On Phone and Transformer: Settings > Wireless & networks > Bluetooth Settings > Make Discoverable
3) On Transformer: Settings > Wireless & networks > Bluetooth Settings > Click to connect to your Phone under "Bluetooth Devices"
4) On Phone and Transformer: Click "Pair" button to pair your devices
5) If they're not connected after this automatically, repeat Step 3
6) On Transformer: Settings > Wireless & networks > Bluetooth Settings > Click on the wrench next to your Phone's name and make sure that under "Profiles" under "Tethering" it says "Tethered" and not "Use for Internet Access". If it says "Use for Internet Access", click it to start tethering
The next time, since you've already paired your devices you can start at Step 5.
If everything works correctly, you should have the two Bluetooth icons in the system tray as shown in my screenshot. The one on the left meaning Bluetooth is enabled and the one on the right meaning that you are using the iPad's internet connection successfully.

I have infrastructure on my fascinate. Tethers no problem to anything. Just download wireless tether v3.0 pre 12.
I would post the APk but i can't.
Hope this helps.
Sent through mental telepathy

Mean Sixteen said:
I have infrastructure on my fascinate. Tethers no problem to anything. Just download wireless tether v3.0 pre 12.
I would post the APk but i can't.
Hope this helps.
Sent through mental telepathy
Click to expand...
Click to collapse
My method doesn't require root as "Wireless Tether for Root Users" on the Market does. As well, Bluetooth Tethering requires less battery.

I am trying to tether my tf to my wm6.5 phone using bluetooth without success.
I can tether my phone to the tf without problem.
http://www.androidtablets.net/forum...8-70-101-etc-tablet-windows-mobile-6-5-a.html
From the link above, people successfully tether their archos to wm6.5 phones using BT. But some of the options in the archos's settings are not in our tablet.
Can someone please help.
Thanks.

javroch said:
I don't have an iPad, but I am able to have my Transformer tether to my Droid X no problem. I can give you the steps I use for that, I'm sure you could generalize it pretty easily to the iPad.
1) On Phone and Transformer: Settings > Wireless & networks > Enable Bluetooth
2) On Phone and Transformer: Settings > Wireless & networks > Bluetooth Settings > Make Discoverable
3) On Transformer: Settings > Wireless & networks > Bluetooth Settings > Click to connect to your Phone under "Bluetooth Devices"
4) On Phone and Transformer: Click "Pair" button to pair your devices
5) If they're not connected after this automatically, repeat Step 3
6) On Transformer: Settings > Wireless & networks > Bluetooth Settings > Click on the wrench next to your Phone's name and make sure that under "Profiles" under "Tethering" it says "Tethered" and not "Use for Internet Access". If it says "Use for Internet Access", click it to start tethering
The next time, since you've already paired your devices you can start at Step 5.
If everything works correctly, you should have the two Bluetooth icons in the system tray as shown in my screenshot. The one on the left meaning Bluetooth is enabled and the one on the right meaning that you are using the iPad's internet connection successfully.
Click to expand...
Click to collapse
Thanks for taking the time to provide such a great response.
I get all the way to the screen that says "Tethered" but for some reason the Transformer won't detect an internet connection.
I am attaching a screenshot of my IPad which shows a strange symbol where the 3g usually is. I am assuming it is some sort of tethering notification.
The IPad shows connected under bluetooth as does the Transformer.
Thanks for your help.

Eyedoctor2 said:
Thanks for taking the time to provide such a great response.
I get all the way to the screen that says "Tethered" but for some reason the Transformer won't detect an internet connection.
I am attaching a screenshot of my IPad which shows a strange symbol where the 3g usually is. I am assuming it is some sort of tethering notification.
The IPad shows connected under bluetooth as does the Transformer.
Thanks for your help.
Click to expand...
Click to collapse
Strange. I don't have an iPad, like I said, so it's hard to say. I thought this was happening to me, but it actually turned out my phone radio just got into a weird state so i just put it into Airplane mode and back out of it again and it started working. But, in that instance, I wasn't able to reach the internet on the phone either, so obviously it couldn't forward anything through to the Tablet. Wish I had more information to help you out. Maybe, there might be some option somewhere on the iPad that you have to switch on to allow internet to flow through?

Thanks again. Maybe it's an IPad problem, though it is weird that it will tether to a Windows 7 phone and a IPhone 4 but not to a Transformer.

Any idea on how to do this with a droid 1?
If not... What droid does work with it?

ubermetroid said:
Any idea on how to do this with a droid 1?
If not... What droid does work with it?
Click to expand...
Click to collapse
Read this thread
you need to root your Droid 1 and download an app from the Market. The tethering works with bluetooth not wifi.
I haven't done this yet but it's my next project.

Mine is tethering fine with free Mywi on i4 on 4.3.1.

jerirat said:
Read this thread
you need to root your Droid 1 and download an app from the Market. The tethering works with bluetooth not wifi.
I haven't done this yet but it's my next project.
Click to expand...
Click to collapse
Did you try my steps posted a few posts back? You shouldn't need any APK's from the Market, etc to get Bluetooth Tethering working, it should just work and I don't think it's Droid X specific, nothing in the steps seems to be at least:
http://forum.xda-developers.com/showpost.php?p=14044350&postcount=6

EMINENT1 said:
Mine is tethering fine with free Mywi on i4 on 4.3.1.
Click to expand...
Click to collapse
Frustrating.....
Why can I share my IPad's 3g with a Windows 7 phone and an IPhone but not the Transformer.
Computers....

Eyedoctor2 said:
Frustrating.....
Why can I share my IPad's 3g with a Windows 7 phone and an IPhone but not the Transformer.
Computers....
Click to expand...
Click to collapse
Are u on the newest TF firmware? Try a hard reboot too?

EMINENT1 said:
Are u on the newest TF firmware? Try a hard reboot too?
Click to expand...
Click to collapse
Yes, latest firmware and I did the 12 second power button reboot.
Any other successful tetherers out there?

javroch said:
Did you try my steps posted a few posts back? You shouldn't need any APK's from the Market, etc to get Bluetooth Tethering working, it should just work and I don't think it's Droid X specific, nothing in the steps seems to be at least:
http://forum.xda-developers.com/showpost.php?p=14044350&postcount=6
Click to expand...
Click to collapse
The person asked about tethering the OG Droid which doesn't allow tethering unless it's rooted.

Related

[Guide] Reverse USB Tethering

Hey Everyone,
I was searching all over Google and XDA to find an applicable solution to have reverse USB tethering enabled on my Captivate - I recall it was a default option in the stock JH6 it came with but afterwards, it was removed.
This is only for Windows based machines. I've tested this to work on my 32-bit Windows 7 laptop.
Now, before I go on, i'm going to mention some requirements to get this running:
*Rooted Captivate
*A console emulator - or program to apply a script
*USB Tethering in the Settings menu, most probably under "Wireless & Network"
*A Windows machine
*USB Drivers for your Captivate MUST be installed
There are two parts to getting this work, let's start by connecting the phone in "Debugging Mode" to the PC:
1.
Go to "Settings" --> "Wireless and networks" --> "Tethering" then select the check mark next to "USB Tethering"
2.
Open your console emulator - and type in the below:
su
netcfg usb0 dhcp
This will force the USB to obtain its IP Address/Info from the DHCP server.
On the Windows machine, you will need to apply the below:
1.
Network and Sharing Center --> Network Connections (Change Adapter Settings)
2.
Make note of your Samsung USB interface, mine is named "Local Area Connection 10" (SAMSUNG Android USB Remote NDIS Network Device)
3.
Select the Network interface that you would like to share - mine is "Wireless Network Connection", and go to its "Properties"
4.
Go to the "Sharing" tab
5.
Check the first box "Allow other network users to connect through this computer's Internet connection"
6.
In the drop-down box, choose the interface that recflect's your Samsung's USB
7.
Apply & OK, you should be good to go.
If this works on your side, don't forget to hit the "Thanks" button.
I hope you all enjoy!!
Edit:
Added a script so that users are able to apply the script via GScript rather than use a console emulator.
Thats a good guide... It will work from your local pc... not from your office pc because connection sharing will be most likely be disabled!! Well, when at home, I already have my wifi connection to use. This would have been so good if we could do it at our office
Thanks for sharing!
sujesharukil said:
Thats a good guide... It will work from your local pc... not from your office pc because connection sharing will be most likely be disabled!! Well, when at home, I already have my wifi connection to use. This would have been so good if we could do it at our office
Thanks for sharing!
Click to expand...
Click to collapse
If your office PC has wi-fi adapter in it and runs Windows 7, you can use this guide http://tameyourpc.blogspot.com/2009/07/windows-7-as-wireless-access-point.html to turn your PC into a wifi AP. That's what I did in my office using my office laptop.
Office PC does have wi-fi, but getting Windows 7??? It is like hoping to get Honeycomb on our captivate
Well, I dont really care much now, I use about 1.6 to 1.7 gigs a month of 3g even after hooking onto every free wifi spot I get! so I am good..
I love how I was trying to fond out how to do this last month; I cant connect to the school's wifi anymore so I had to upgrade my data plan.
However im definitely going to do this when I get back.
sujesharukil said:
Thats a good guide... It will work from your local pc... not from your office pc because connection sharing will be most likely be disabled!! Well, when at home, I already have my wifi connection to use. This would have been so good if we could do it at our office
Thanks for sharing!
Click to expand...
Click to collapse
Glad I could help.. Sucks if you don't have admin privileges at your office PC
I kinda like to use this when i'm low on battery, or when my phone can barely get a Wifi signal, but the Laptop has a better one.. etc..
FLAC Vest said:
I love how I was trying to fond out how to do this last month; I cant connect to the school's wifi anymore so I had to upgrade my data plan.
However im definitely going to do this when I get back.
Click to expand...
Click to collapse
Good luck!
Hii,
used your guide to reverse tether the internet connection to my galaxy 3 GT-I5801,
but there's a problem whenever i try to browse the net a popup comes and says connection not found retry or okay. i click okay and then again it popups ignoring this the net is working fine.. also i can't use the internet to download apps via market i can see them see their screen shots but can't download them.
deepansh_gupta said:
Hii,
used your guide to reverse tether the internet connection to my galaxy 3 GT-I5801,
but there's a problem whenever i try to browse the net a popup comes and says connection not found retry or okay. i click okay and then again it popups ignoring this the net is working fine.. also i can't use the internet to download apps via market i can see them see their screen shots but can't download them.
Click to expand...
Click to collapse
I'm using it just fine here, not sure if it could be that the PC you're connecting to uses a proxy/firewall/security suite or something that might be blocking off some sort of traffic..
Correct me if i'm wrong, but you can browse the net, right?
Interesting, thanks
Sent from my SAMSUNG-SGH-I897 using XDA App
Will this reset to normal tether mode upon reboot? If not, what's the reset command?
Sent from my SAMSUNG-SGH-I897 using Tapatalk
FeO2 said:
Will this reset to normal tether mode upon reboot? If not, what's the reset command?
Sent from my SAMSUNG-SGH-I897 using Tapatalk
Click to expand...
Click to collapse
yes, in fact, just upon removing the usb cable
i believe that even disabling/re-enabling usb tether should do the trick but i haven't tried it
Sorry to revive a dead thread, but is this method still usable? or does anyone has a better way to do reverse tethering by now?
low99 said:
Sorry to revive a dead thread, but is this method still usable? or does anyone has a better way to do reverse tethering by now?
Click to expand...
Click to collapse
Hey,
Sorry for not checking back on this.
I still use it till the day on Andromeda 2.2 and it rocks
Tell me how it works for you
I don't get it? You could use you PC for internet stuff and your phone as a phone? I love my smartphone but if I'm near a computer, that's usually going to be used first for anything data.
GSMinCT said:
I don't get it? You could use you PC for internet stuff and your phone as a phone? I love my smartphone but if I'm near a computer, that's usually going to be used first for anything data.
Click to expand...
Click to collapse
In simple words, you could get your Captivate to use internet off your PC, rather than waste your battery on wireless, or your GBs on your data plan - or simply if there is no wireless network!
aehlayel said:
In simple words, you could get your Captivate to use internet off your PC, rather than waste your battery on wireless, or your GBs on your data plan - or simply if there is no wireless network!
Click to expand...
Click to collapse
You missed his point, he is saying why bother using the internet on your phone at all if you have a freakin COMPUTER in front of you.
studacris said:
You missed his point, he is saying why bother using the internet on your phone at all if you have a freakin COMPUTER in front of you.
Click to expand...
Click to collapse
Exactly 10char
Didn't really worked, can you help me out?
I got
1) USB debugging mode on
2) plugged in my phone to the pc
3) ticked Tethering in settings
4) opened the app "terminal emulator"
5) keyed in
su
netcfg usb0 dhcp
6) Change adapter settings, and set to share, however I don't have the drop down box, so I'd figure it is on the advanced tab but I'm quite clueless to what to fill (I'm on windows 7)
*screenshot attached*
low99 said:
Didn't really worked, can you help me out?
I got
1) USB debugging mode on
2) plugged in my phone to the pc
3) ticked Tethering in settings
4) opened the app "terminal emulator"
5) keyed in
su
netcfg usb0 dhcp
6) Change adapter settings, and set to share, however I don't have the drop down box, so I'd figure it is on the advanced tab but I'm quite clueless to what to fill (I'm on windows 7)
*screenshot attached*
Click to expand...
Click to collapse
Ok, so from the screenshots it seems you've got the wrong interface:
3.
Select the Network interface that you would like to share - mine is "Wireless Network Connection", and go to its "Properties"
Click to expand...
Click to collapse
So that should be the interface you want to share, say your Ethernet or Wireless.
And I believe that you configure the PC side first, then the phone side...
Tell me if it works this way for you.
I lost you, you're on a window xp machine? mine doesn't read as wireless network but as local area connection, I did start from the phone side, but the settings on the adapter seems to stick after I unplug and everything. Can I have a few screenshots? Sorry for the trouble.

[Q] Transformer and WiFi hotspot from mobile phone

Hi all knowing xda gurus,
I have a question for you: Is it possible to connect the Transformer and use the internet from a mobile phone?
I trying to use the WiFi Router application on my HTC HD2, to share the internet with my Transformer and I can't get them to see each other????
Any suggestions?
rio
rio911 said:
Hi all knowing xda gurus,
I have a question for you: Is it possible to connect the Transformer and use the internet from a mobile phone?
I trying to use the WiFi Router application on my HTC HD2, to share the internet with my Transformer and I can't get them to see each other????
Any suggestions?
rio
Click to expand...
Click to collapse
I can tell you that my Transformer connects perfectly to the mobile hotspots on both my HTC Desire and Galaxy Tab.
Does your WiFi Router application create a real hotspot, or is it an adhoc network? If it is adhoc, it probably won't work out of the box, and I think you'd need to be rooted in order to make the necessary changes.
Regards,
Dave
Hi Dave,
I can't actually distinguish between the two (real hotspot vs adhoc network), but I did start a Desire HD rom on my HD2, then started the WiFi Hotspot app that comes with it.... and surprise, surprise it works....
Good catch and thanks this will have to do until I figure out what to do with the WinMobile WiFi router.
rio
foxmeister said:
I can tell you that my Transformer connects perfectly to the mobile hotspots on both my HTC Desire and Galaxy Tab.
Does your WiFi Router application create a real hotspot, or is it an adhoc network? If it is adhoc, it probably won't work out of the box, and I think you'd need to be rooted in order to make the necessary changes.
Regards,
Dave
Click to expand...
Click to collapse
Hi there,
Does usb tethering work? Well, for sure, the native usb tethering won't work, because there are no drivers, but is there an app to make it work? (@HD2 with DHD Rom)
greetz
Spider
GtaSpider said:
Hi there,
Does usb tethering work? Well, for sure, the native usb tethering won't work, because there are no drivers, but is there an app to make it work? (@HD2 with DHD Rom)
greetz
Spider
Click to expand...
Click to collapse
I don't know, there is no usb on the tablet only on the keyboard (which I don't have). As far as I can see in the Adnroid settings "usb tethering" is available though.
Hope this helps,
rio
Hi Guys,
Did you work out the original problem with the Wi-Fi router on the HTC HD2 and the Asus Transformer, im using the exact same combo and they will not see eachother (Wi-Fi) No Wi-Fi at work cos of Security but now i dont have comms to my tablet
Thanx Guys
I achieved this by using the Wifi Tether application, it requires root on the phone (Android phone here, sorry). The biggest problem with mobile-to-wifi internet is that most applications will create ad-hoc Wifi networks, as opposed to hotspots. Transformer with stock software will not even see an ad-hoc network, I imagine this is your issue, too. There two options here:
1) if you want to root the Transformer, it is possible to make it see an ad-hoc version, but changing one of the configuration files.
2) you can use Bluetooth tether instead of Wifi, for most situations it will do the trick. No need to root the TF then.
See this thread for more info: http://forum.xda-developers.com/showthread.php?t=1074317&page=1 (it is about droids, but may help anyway).
I'm also using the Wifi Tether app that came with MDJ ROM for HD2 and it works great... too bad the small battery on the HD2
I havea motorola Atrix,i can tether using barnacle a rooted app, stock mobil hotspot, and through blue tooth. Havent had an issue yet.
Same problem here HD2 (WinMo6.5) + Transformer
I don't want root my transformer (yet)
kovla said:
I achieved this by using the Wifi Tether application, it requires root on the phone (Android phone here, sorry). The biggest problem with mobile-to-wifi internet is that most applications will create ad-hoc Wifi networks, as opposed to hotspots. Transformer with stock software will not even see an ad-hoc network, I imagine this is your issue, too. There two options here:
1) if you want to root the Transformer, it is possible to make it see an ad-hoc version, but changing one of the configuration files.
2) you can use Bluetooth tether instead of Wifi, for most situations it will do the trick. No need to root the TF then.
See this thread for more info: http://forum.xda-developers.com/showthread.php?t=1074317&page=1 (it is about droids, but may help anyway).
Click to expand...
Click to collapse
Secound option doesn't work
"Faild to estabilish Internet Sharing connection to remote device as it supports only Network Access Point (NAP) mode"
Somebody help us!
oromis said:
Somebody help us!
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1093778
You don't have to root your transformer to use a mobile hotspot (takinga 3g signal and converting it into a wi-fi router)
If you have any rooted Android phone, you just need to install either Baranacle, Wireless Tether, or Open Garden. All are root-only apps, and you sometimes have to try each to get it to work. At first only open garden worked, wireless tether/barancle didn't. It's very doable though.
W4LLY said:
You don't have to root your transformer to use a mobile hotspot (takinga 3g signal and converting it into a wi-fi router)
If you have any rooted Android phone, you just need to install either Baranacle, Wireless Tether, or Open Garden. All are root-only apps, and you sometimes have to try each to get it to work. At first only open garden worked, wireless tether/barancle didn't. It's very doable though.
Click to expand...
Click to collapse
You do have to root your transformer for barnacle.
Barnacle creates an ad-hoc connection which the transformer won't see without first rooting and replacing the wpa_supplicant file. Most wifi tether applications do the same thing.
rio911 said:
Hi all knowing xda gurus,
I have a question for you: Is it possible to connect the Transformer and use the internet from a mobile phone?
I trying to use the WiFi Router application on my HTC HD2, to share the internet with my Transformer and I can't get them to see each other????
Any suggestions?
rio
Click to expand...
Click to collapse
I had the same issue until I tried the settings below. I have a EVO 4G so I don't know if the HD2 is anything like it but if it is then you can try these:
Go into setting
Go into wireless and networks
Go into Hotspot Settings
Go to Menu and click on Advanced
Select LAN settings
Click on DHCP
After that you should be able to connect. If not then your setup is different then mine and won't work. It's worth a try though.
not much helpfull I guess but works fine on my xperia arc stock rom unrooted android 2.3 so no need to use apps at all

[Q] trying to tether my Transformer to HTC hero

trying to share my HTC heros connection with my transformer but it isn't working. Neither bluetooth or wifi.
Running 2.1 by the way.
Another option is if someone gives me a guide to set up internet sharing from windows 7, which I cannot find for the life of me.
no one? ):
Google bridge connections on win 7. I'm not telling you how to do it. You have to do some of the work yourself
Sent from my GT-I9000 using XDA App
blader3759 said:
Google bridge connections on win 7. I'm not telling you how to do it. You have to do some of the work yourself
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
googled that before, I can find PC to PC and mostly for windows XP, but nothing on how to create a bluetooth bridge to the transformer ):
Your hero is rooted right? Mine tethers over Bluetooth fine using 'wireless tether for root users'.
Running rooted 2.3.3 on the hero, the updated transformer cant see airshare adhoc network. Wirelessteather also failed in the same way.
Wirelessteather does work with bluetooth.
seshmaru said:
trying to share my HTC heros connection with my transformer but it isn't working. Neither bluetooth or wifi.
Running 2.1 by the way.
Another option is if someone gives me a guide to set up internet sharing from windows 7, which I cannot find for the life of me.
Click to expand...
Click to collapse
can you tether your hero to your laptop? does your phone's wifi hotspot work? it is disabled from some carriers
wifi hotspot doesnt work but, I've flashed froydvillain (2.2) and gonna give bluetooth tether a try. And nice to see some hero users in here.
seshmaru said:
trying to share my HTC heros connection with my transformer but it isn't working. Neither bluetooth or wifi.
Running 2.1 by the way.
Click to expand...
Click to collapse
Did you have any success in the end?
My Transformer's just arrived, and I'd like to tether to my rooted Hero, but can't figure it out.
If I choose WiFi mode, the Transformer can't see the Hero in the list of WiFi networks.
If I choose Bluetooth mode, I can pair the devices, but then what? How to I create the network connection? In Settings -> Wireless & networks -> Tethering & portable hotspot I turned on Bluetooth tethering, but it's not clear to me if that's to allow the Transformer to be the hotspot (i.e. server instead of client).
(Running VillainROM v13 on my Hero)
This has been a problem for many of us....it has been discussed in a few other threads also. Honeycomb (by default) won't connect to adhoc wifi networks.
I will donate to anyone who can create a hassle-free turnkey solution for this. Many of us have Android phones that are rooted, so a solution would benefit many. And I am using a Tilt 2, whose Android ROMs do not support BT. So this tethering solution needs to support wifi.
Sent from my Tilt 2 using XDA App
case0 said:
Your hero is rooted right? Mine tethers over Bluetooth fine using 'wireless tether for root users'.
Click to expand...
Click to collapse
I'm also using wireless teather, only I am feathering it via wifi. It works fine.
Success!
I reverted my Hero to the previous ROM I was using, FroydVillain 1.7.2, and now I have Bluetooth tethering working.
Once the devices are paired, on the Transformer screen in the Bluetooth settings, where the Hero shows up, there's a spanner/wrench icon - when I clicked that I got the option to tether to it - this option didn't show up when I was using VillainRom v13.
I may try going back to VillainRom to see if it was something unconnected, such as rebooting the phone, which made the difference.
UPDATE: I went back to VillainRom v13 (Android 2.1) and it still failed to tether with Bluetooth. An Android 2.1 vs Android 2.2 issue, perhaps?
Can anyone else with a 2.1/eclair and 2.2/froyo device confirm this?
Have the same problem CM7(2.3.3)
WiFi or Bluetooth doesn't work.
I don't think we should see the "problem" as our phones. The issue is that Honeycomb (whether on the Transformer or Xoom or whatever) does not recognize ad hoc wifi connections. If that is addressed, this will be solved for everyone.
davedontmind said:
Did you have any success in the end?
My Transformer's just arrived, and I'd like to tether to my rooted Hero, but can't figure it out.
If I choose WiFi mode, the Transformer can't see the Hero in the list of WiFi networks.
If I choose Bluetooth mode, I can pair the devices, but then what? How to I create the network connection? In Settings -> Wireless & networks -> Tethering & portable hotspot I turned on Bluetooth tethering, but it's not clear to me if that's to allow the Transformer to be the hotspot (i.e. server instead of client).
(Running VillainROM v13 on my Hero)
Click to expand...
Click to collapse
Here is what I did:
1. Disabled the WiFi on Transformer.
2. Enable WiFi-Tether on Phone (with Bluetooth and check the discoverable option in the settings before you start tethering).
3. Enable Bluetooth on Transformer and scan for devices. (If you already have it, unpair it first).
4. Pair with your phone.
5. Press the Wrench icon beside the phone (that says paired but not connected) on Transformer.
6. You will find a new option called Tethering. Press it and you're done.
Agagin, that's what I did and it worked for me perfectly. I have CM7 on my phone.
By the way, this exact method didn't work on my wife's Sprint LG Optimus S. Tried everything, but no way...
Hope this helps...
ahmadshawki said:
Here is what I did:
1. Disabled the WiFi on Transformer.
2. Enable WiFi-Tether on Phone (with Bluetooth and check the discoverable option in the settings before you start tethering).
3. Enable Bluetooth on Transformer and scan for devices. (If you already have it, unpair it first).
4. Pair with your phone.
5. Press the Wrench icon beside the phone (that says paired but not connected) on Transformer.
6. You will find a new option called Tethering. Press it and you're done.
Agagin, that's what I did and it worked for me perfectly. I have CM7 on my phone.
By the way, this exact method didn't work on my wife's Sprint LG Optimus S. Tried everything, but no way...
Hope this helps...
Click to expand...
Click to collapse
I guess Bluetooth is better than nothing, but supposedly there is a hack to get a Xoom to work with ad-hoc, so must be a way to get our Transformers to work with it as well. Guess we just need to play the waiting game. Cant wait to see what options we have in another month. I have the HTC Hero with CM7 and the Transformer, same issues with no tethering, though since im not a bluetooth fan, I really havent tried it yet. Wifi tether works fine with my ubuntu/windows laptops though.
How about USB tethering? Is that an option with our phones and the transformer?
MACscr said:
I guess Bluetooth is better than nothing, but supposedly there is a hack to get a Xoom to work with ad-hoc, so must be a way to get our Transformers to work with it as well. Guess we just need to play the waiting game. Cant wait to see what options we have in another month. I have the HTC Hero with CM7 and the Transformer, same issues with no tethering, though since im not a bluetooth fan, I really havent tried it yet. Wifi tether works fine with my ubuntu/windows laptops though.
Click to expand...
Click to collapse
Ad hoc tether is an issue for droid and lots of info can be found on the net and xda.
I have got a hero running villain rom v13 and can run wifi tether with a modified wpa_supplicant file.
See this post
Download the modded wpa_supplicant file, copy to /system/bin, set the permissions as shown and you can then see and tether to your ad hoc hero - dont forget to backup the original file(rename by adding .bak to file and copy to your sd card)
Obviously you need root.
speckledpig said:
Can anyone else with a 2.1/eclair and 2.2/froyo device confirm this?
Click to expand...
Click to collapse
Bluetooth tethering works fine for me using HTC Hero GSM, Wireless tether for root app, rooted using Android 2.2.1, CM6.2 based Elelinux Speedmachine V3. My TF is UK/WW version 8.2.3.13, bluetooth V6.1.2.
Confirmed Ad-hoc wifi doesn't work.

Can PDANet or Easy Tether be connected to a ASUS Transformer or other Android Tablet?

This is probably a dopey question, but here it goes. I have a D2G, but I unfortunately can't root it again (FYI my firm flagged my phone as being an unauthorized Android device on the server when I tried), so wireless tether is not feasible. My question is is there a way to install and use PDANet, Easy Tether or Klink on my ASUS Transformer?
Any help or guidance will be greatly appreciated.
Bluetooth Tether?
Have you tried pairing your phone to your Transformer via Bluetooth? People are able to just bluetooth pair their moto phones to the Xoom and check a wrench that shows up (tablet) when you select the connection to your droid. After clicking the wrench you might see a tethering option.
djembeman said:
Have you tried pairing your phone to your Transformer via Bluetooth? People are able to just bluetooth pair their moto phones to the Xoom and check a wrench that shows up (tablet) when you select the connection to your droid. After clicking the wrench you might see a tethering option.
Click to expand...
Click to collapse
I always intended to, but was afraid of being disappointed. Then last night I played with the bluetooth settings a little and it worked. I didn't try it for an extended time, but I wi-fi was definitely off and bluetooth was definitely enabled and I was able to get on a couple websites without a problem.
Thank you!!!

[Q] wireless thether Bluetooth

when i pair my sprint hero to my transformer it says paired but not conected. Rooted hero cyanoyen 7.0.3 stock transformer.
src182 said:
when i pair my sprint hero to my transformer it says paired but not conected. Rooted hero cyanoyen 7.0.3 stock transformer.
Click to expand...
Click to collapse
Some more information would helpful. What is it you want to do via Bluetooth? Share content between devices (e.g. music, videos, contacts etc)? Share the mobile data connection for Internet access where WiFi isn't available? Pairing devices on its own doesn't automatically 'connect' them as such, you need to tell them to do something .
Share the mobile data connection for Internet access where WiFi isn't available.
Unpair them, and then turn on wireless tether. It should ask permission to turn on bluetooth and make discoverable. Then on the transformer, search for devices. It should see the phone. Pair them. Then under paired devices on the transformer, it should show the phone with a little wrench next to it. Click the wrench and there will be the option for bluetooth tethering.
In that case I'm not sure that this is available over Bluetooth. You might however be able to use WiFi tethering, I'm not sure. I'm not quite up to scratch with everything that Cyanogenmod offers. Check under 'Settings' > 'Wireless and network' > 'Tethering' (if available) and see what there is. It might be called WiFi tethering or Mobile AP or something of that ilk. If not then perhaps you could ask over at the Cyanogenmod forums, or wait for someone else here to come up with a better answer .
[EDIT]: @lordgodgeneral: Hmm, interesting. I'll have to check this one out myself and see what I can do with it. I guess there was no need to wait for an answer after all .
Was able to do it through pdanet table beta but still can't do it with wireless thether app.
thanks for the help.
Sent from my HERO200 using XDA App
Thanks finally works, had to keep trying. Way better than pdanet that only the browser worked.
Sent from my HERO200 using XDA App
Is it true that TF101 can only connect wirelessly to the inter via bluetooth tethering? that might be a problem because my XPERIA X10 2.3 does not have an option for Bluetooth tethering but for wifi and usb tethering
khakhi said:
Is it true that TF101 can only connect wirelessly to the inter via bluetooth tethering? that might be a problem because my XPERIA X10 2.3 does not have an option for Bluetooth tethering but for wifi and usb tethering
Click to expand...
Click to collapse
No, that is not true. You can connect through wifi. I do it every day.

Categories

Resources