[Q] Handbrake Settings for Anime - Eee Pad Transformer Q&A, Help & Troubleshooting

I've got a very large anime collection I'm trying to convert for playing on my mobile devices.
Been doing some digging and experimenting with some of the settings posted in other threads for encoding videos with handbrake and just some on my own converting rips of my dvd's.
Has anyone that's done lots of encoding with handbrake found a setup that works good for anime? Especially older anime (Early DBZ, Slayers, etc)
Using the settings found here
http://forum.xda-developers.com/showthread.php?t=1060825
Its worked well for encoding regular movies, but still get noticeable tearing when there is any vertical or horizontal panning. This happens some some on new anime, but really really badly on the older stuff. Using Decomb has helped with a large part, but still gets really annoying when watching.
Just looking for some hints or tips for close to DVD quality when watching on the transformer.
Thanks

Just use MoboPlayer, it'll play all of them just fine (some software decoding some hardware decoding). You shouldn't experience any lag unless they're 1080p
Sent from my Transformer TF101

I am using moboplayer to play the converted files. The problem is the converting process not lag. Pretty much what I'm doing is using DVDShrink/Decrypter to rip the DVD to the hard drive. Then using handbrake to convert the VOB files to individual episodes in .mp4 format.
Some files I've found I've had to use decomb/deinterlace to fix because looking at the converted file it was pretty obviouse it wasn't provressive scan.
Pretty much just using a main profile, sizing same as original, FPS same as original, using the h.264 codec, mostly the settings shown in the above link.
Tried doing other tests/playing around with the filters, RF factor or constant bitrate, and no matter what I've tried. The video's look really good on the transformer for the most part but can't seem to get an output file that doesn't have some choppiness/tearing when it does much horizontal/vertical panning in scenes. These "flaws" show up on any device I play them on, not just the transformer (Computer, Phone, G Tab, Transformer).
Just seeing if someone's found the magic formula or settings, or if I'm maybe just going about it the wrong way. Just trying to rip them and keep as close to DVD quality I can.

If you hate the tearing/combing resulting from deinterlacing. You can try DGIndex (it processes the .vob to generate information about what kind of interlacing it uses) and based on the % that's FILM, you can choose to do a force pulldown. Which turns it into a 23.976 video (this is the framerate anime and film are made in), 29.97 is special effects. So if the video is 95%+ film material, dropping the interlaced frames will only make the special effects look a bit weird, everything else is smooth as silk. If you want everything to be perfect, look into Avisynth and AnimeIVTC. It'll even deinterlace ugly credits to make it look good, though it's really slow and takes forever.

Related

Alternative video player

I've playing around with a Windows Mobile 6.1 phone and wasn't satisfied with the Windows Media Player.
When it is opening a video, the video is all choppy but the program becomes totally unresponsive
Seeking is just a guessing game. I hold down the rewind/forward button and don't really have a clear idea where the video is going to stop at all.
Just wondering are there any good alternatives video players that will load faster and be more responsive?
The only three players I've looked at was:
TCPMP which seems very good...except I'm not sure how I'm supposed to install it and customize it (I think there was some plugin to get it to play FLV files?).
Core Player Mobile seemed pretty good as well.
PocketTV didn't seem to support many formats.
In general, I use Avidemux to change videos (AVI's or FLV's) I find online to MP4's with MPEG4-SP video and AAC audio. I wouldn't mind be able to run FLV files without having to process them or being able to encode h.264 video but that's not too important to me.
What is important to me is a responsive and fast video player.
Any suggestions?
I use CorePlayer and it's wonderful.. don't see any reason to use anything else.
which device do you have?
PanTech Matrix Pro
Apparently someone involved in the project was a college buddy of my dad or something.
Though I did notice a weird issue...the frames don't seem to update at the same time...
Like whenever the screen flashes or something moves suddenly, I can notice that the bottom half of the screen tends to update before the top half of the screen.
And the division of the screen is rarely in the same place.
So basically if the video is flashing black and white, the screen looks like a wave of black and white is moving from the bottom on the screen to the top in a real jerky manner.
Really annoying when...well...anything moves.
Does it for all my videos even if the video is low fps and an easy codec.
The default windows media player doesn't do it...but the default players pretty sucks in every other way.
Any idea of how I can tweak it?
I'm using 1.3 for Windows Mobile 6.1
edit: Hmmm...setting the video driver to GDI seems to make it slightly less noticeable.
im with nir i sue coreplayer ansdi t plays pretty much every codec and theres no need to install extra codecs
this includes divx
its not free but worth it
You can use TCPMP if you want some thing free and good
Oh I tried. But Coreplayer's h264 playback is amazing to me.
movie player
i had coreplayer but its freezing on me so what else can I use?
it froze on me too!
CorePlayer is fantastic - the only drawback that I have occured so far is that fact that it cannot play AC3 sound files commonly found in *.avi files...otherwise, it is brilliant. Worth the money in my opinion.
No need to encode or whatever, usually I just drag and drop video files onto my phone and it plays it just fine...much better than converting through iTunes ....unfortunately no 720p/1080p just yet, but that's just asking for too much

Trouble ripping movies to my TBolt...

I have been using an older version of DVDFab v8.0.7.3 to convert dvd's to m4v files to watch on my phones. All of my older movies play fine. Anything I convert now with this newer version will not play. They will play fine on my computer but not my TBolt. I'm not sure what I'm doing wrong. Anyone familiar with DVDFab v8.0.8.5 feel like giving me a little heads up?
Try avi format.
Sent from my ADR6400L using XDA App
I'll try that but why would all my other videos that are m4v work and just not the new ones?
ignitros said:
I'll try that but why would all my other videos that are m4v work and just not the new ones?
Click to expand...
Click to collapse
What are you using to play the video. Try a different player.
I have the stock video player and the 3d gallery one. But that still doesn't explain why my older videos work and the newer one don't unless there is a problem with the new program I'm ripping from vs the older version.
I've used Badaboom, Xilisoft Video and AVS to convert videos. If you're really nuts like me, first you use SlySoft to remove the DRM from the DVD in your computer's optical drive. Then I use 1ClickDVDCopyPro to rip the DVD into a folder on my hard drive.
From that hard drive folder I use AVS Video Converter (v7) to create a video from the profile for Android devices with some slight modifications. I change the frame size to 800x480 or 720x480. I also change the audio down to 128kbps (just to save space). The bitrate for the video I go between 800 and 1500, depending. For documentaries and dramas, 800 to save space and 1500 for action movies to give a cleaner video playback.
Then use RockPlayer (download the ARM v7 - don't use the universal player) to playback the MP4 video. That's the best success I've had with converting my own video.
Usually anything that I download from the Internet, I use the Xilisoft Video Converter (v6.5.3) to create pretty much the same thing as the DVD rips. The reason I don't use Xilisoft for DVD rips is the way it reads the IFO files from DVD's. The AVS software is pretty intuitive for the files based on the IFO. I also try to download the highest quality I can find so I don't lose much in re-encoding the video to a lower bitrate.
Good luck. Hope that rambling above helps.
Oh yeah. Forgot to mention. I've used Badaboom, but found it slow and didn't seem to make my video conversions better or equal to the AVS or Xilisoft converters. Hard to tell on the TB because of the small screen, but when viewed on the computer it looks worse by comparison.
Plus, the Xilisoft CUDA seems to work faster (I have a new Intel Sandy Bridge with a GTX 460 for processing) than the Badaboom. Xilisoft converts 4 videos at a time on my computer, each hour long video taking about 15-20 minutes to complete (simultaneously). Very nice.
Well... I tried that Rock Player and it works okay. I still can't figure out for the life of me why my other videos play when they were created the same way as the newer ones. Rock player seems to play them fine and the stock player plays the avi files I created I just don't think they look as good as the m4v ones I made previously. I guess I'm just going to have to fool around with it alot more to get things figured out.
For newer movies, DVDFAB to remove the protection then Handbrake to convert. DVDFAB is free for just ripping DVDs but they don't make that really known on their website. This is possibly the most fool-proof way to do it but it also gives you plenty of options if you're into that.

[Q] Smooth 720p/1080p video playback possible?

In particular MKV files.
I have noted that if I playback an 720p MKV with AC3/DTS sound the video plays perfectly fluid. No microjudder or frame drops AFAIK. But there is no sound of course because the inbuilt player does not support AC3/DTS natively.
However add AAC 2.0 audio into the file (MKV or MP4 container it matters not) I see judder. Kinda like when you have 23.976FPS playing on a 50Hz PAL CRT.
I have tried muxing at various framerates and interestingly the judder gets faster the higher the FPS. Very odd.
I'm used to dealing with AV stuff as I use MPC-HC/ReClock/MadVR etc to my HDTV over HDMI (BTW my Panasonic G20 Plasma does not recognise the TF HDMI output. My PC monittor does however so the TF is outputting in an unsupported res/Hz for my HDTV obviously).
It's puzzling me how when the TF does not have to playback audio the video is perfect but as soon as it has to decode audio it throws a wobbly.
The other interesting thing of note is that Youtube vids at 720p and even 1080p (Big Buck Bunny for instance) play just fine. Methinks that Flash is optimized to the Tegra 2 chip whilst the inbuilt TF player (and all the other players) are not. Moboplayer, Vplayer etc are all a bit crap at it. There is one player called LittlePlayer which gives the option of hardware playback but it is no better than the inbuilt player as it does not decode AC3/DTS and it too judders when AAC audio is played.
Anyone got a clue why this is the case? I was wondering if it was a UK specific issue (would not put it past Asus to make it PAL centric) but then why would it play a 23.976FPS 720p x264 in MKV perfectly (sans audio obviously)?
Yeah I have a 720p mkv and it plays a little off with the sound but I play a higher quality move still at 720p and the sound is like a second off. And the 1080p vids I have don't play at all. What app do you use to play your videos?
Sent from my Transformer TF101 using XDA Premium App
you must be doing something wrong with the muxing or the avc stream you ended up with is not extracted properly.
I encode movies with x264 (commandline), encode the audio with neroaacen(lc, cbr, 128kbit) and mux them with mp4box. The file plays perfectly with the built-in player, meridian or rockplayer in hardware decoding mode.
Most mkv TV series I can extract th evideo stream from and use it, but not all. Some use too many reference frames while encoding and the TF can't handle it.
X264 profile high, level 4.1, preset veryfast or medium. No other options except quality level ((crf 20 or 21 I use mostly).
I've tried MKVToolnix for straight muxing. A simple MKV to MP4 prog without reencoding called mkvavi2mp4. Handbrake (Used settings suggested on this forum). I've also tried some test clips from various sites. All of them judder when audio is being decoded. I am not talking about HUGE judder. I am talking about very small judder. The video is not 100% fluid. Some may not even notice it. I do because I am always messing with progs like ReClock and MadVR in order to get perfect 24p playback to an HDTV. I am also susceptible to phosphor lag, any audio sync issues and other annoyances. I am Mr Super Anal when it comes to perfect playback and have color calibrated all my displays with a colorimeter
But I digress.
If I play Big Buck Bunny 1080p in Youtube or in the default browser it plays fluid (well enough not to be annoying). Now if I rip that same Youtube clip down to my hard disk. Copy it to the TF and play it in ANY player (Moboplayer - with or without codecs packs, Rockplayer, Vplayer, Littleplayer or the inbuilt player) it will not play it without stuttering. What the hell is that all about? Flash player is better at video playback on the TF than Honeycombs implementation? Quite.
I wish I could figure out a way to load the MP4 files in Flash through the browser. I tried file://path to MP4 and it did not work.
If anyone knows a way to do that I would be interested. Maybe I should setup a web server on my PC and stream everything in Flash
P.S. If you wish I can provide you with two sample MKV's. One with audio the other without and you can directly compare the two and post your results. I see small juddering on the clip with audio muxed in every time.
The Youtube app is not using Flash. If it was, Youtube wouldn't play on the iPhone or iPad, and it most certainly wouldn't have played on Android devices before Android 2.2. If you want to see true Flash performance so far, load up Hulu and see if you can get a 480p stream to play acceptably. Edit: Since you mention the UK though, I probably shouldn't assume you're in the US. If that's the case, just load up any Flash-based video player besides Youtube. Sometimes it helps to set your user agent to Desktop, too.
The Youtube app is actually using HTML5, with videos encoded in H.264/MPEG-4 AVC and stereo AAC. The maximum bitrates supported are 5 Mbit/s and 152 kbps, respectively. You need to bear in mind too that by playing videos through the browser, the servers will recognize the device you're playing from and compress and optimize the stream accordingly. A full 1080p video at 5 Mbit/s would take forever to buffer on a tablet, so it's highly unlikely that you're getting the full quality over the network stream. Locally-stored videos, however, are free to be downloaded and played in their maximum quality, so it's understandable that you may see some stutter on large files.
deadman3000 said:
I've tried MKVToolnix for straight muxing. A simple MKV to MP4 prog without reencoding called mkvavi2mp4. Handbrake (Used settings suggested on this forum). I've also tried some test clips from various sites. All of them judder when audio is being decoded. I am not talking about HUGE judder. I am talking about very small judder. The video is not 100% fluid. Some may not even notice it. I do because I am always messing with progs like ReClock and MadVR in order to get perfect 24p playback to an HDTV. I am also susceptible to phosphor lag, any audio sync issues and other annoyances. I am Mr Super Anal when it comes to perfect playback and have color calibrated all my displays with a colorimeter
But I digress.
If I play Big Buck Bunny 1080p in Youtube or in the default browser it plays fluid (well enough not to be annoying). Now if I rip that same Youtube clip down to my hard disk. Copy it to the TF and play it in ANY player (Moboplayer - with or without codecs packs, Rockplayer, Vplayer, Littleplayer or the inbuilt player) it will not play it without stuttering. What the hell is that all about? Flash player is better at video playback on the TF than Honeycombs implementation? Quite.
I wish I could figure out a way to load the MP4 files in Flash through the browser. I tried file://path to MP4 and it did not work.
If anyone knows a way to do that I would be interested. Maybe I should setup a web server on my PC and stream everything in Flash
P.S. If you wish I can provide you with two sample MKV's. One with audio the other without and you can directly compare the two and post your results. I see small juddering on the clip with audio muxed in every time.
Click to expand...
Click to collapse
Shoot them over
http://www.mediafire.com/?gp3bumw7qy9mppm
Check the panning of each. One has AAC audio the other not. Use the default inbuilt video player of the TF (Should offer if you click on the files if you have other players installed). The one without audio plays perfectly smooth on my TF. The one with audio has slight juddering.
deadman3000 said:
If I play Big Buck Bunny 1080p in Youtube or in the default browser it plays fluid (well enough not to be annoying).
Click to expand...
Click to collapse
Just to clarify: You are talking about viewing youtube via the default _web_ browser, setting your user agent such that you get the desktop site and using the flash plugin to play the video? Rather then using the mobile youtube web site or using the built in youtube app?
FYI of your two clips the one without audio plays smoothly in the _default_ player and the one with audio chokes with "This video cannot be played" (This is assuming you tack ".mp4" onto the file names to fool the default media player into trying to play it)
Interesting... I just re-encoded the audio _only_ ("-vcodec copy -acodec libmp3lame" in ffmpeg) and that plays smoothly.
Now mp3 audio isn't part of the mp4 container spec so you'll only get away with it in an mkv container (its flexibility is one of the things that makes matroska difficult to parse)
Ah... the video is High profile at 3.8Mbps that pretty much on the limit of what the tegra2 can do at the moment (I'd say it over it actually) so I'd say that the addition of a complex (relative to mp3) audio track is just too much.
I bet if you re-encoded that video to baseline at the same bitrate and copied the audio stream it would play fine, its just at the max computation threshold.
sub'd... I want to see what you guys are doing, I'd really like to play at least 720p peacefully.
I've tried reencoding using Handbrake and get similar results. Jerky playback with audio. Smooth without. It's like small juddering every quarter second or so. Ignore the web playback that's already been explained that it's HTML5 and is not sending me the full 1080p stream anyhow.
In fact. If someone can send me a 720p video clip with audio that they say plays 100% smooth on their TF I could see if it's not 100% smooth here. If not (as I suspect it won't be) then it's either my TF has issues. Your eyesight is not picking it up or I am going nuts
deadman3000 said:
I've tried reencoding using Handbrake and get similar results. Jerky playback with audio. Smooth without. It's like small juddering every quarter second or so. Ignore the web playback that's already been explained that it's HTML5 and is not sending me the full 1080p stream anyhow.
In fact. If someone can send me a 720p video clip with audio that they say plays 100% smooth on their TF I could see if it's not 100% smooth here. If not (as I suspect it won't be) then it's either my TF has issues. Your eyesight is not picking it up or I am going nuts
Click to expand...
Click to collapse
try this: http://forum.xda-developers.com/showthread.php?t=1060825
I am using the same profile settings in handbrake (high profile) and ALL my videos are really smooth! and YES...I did have judder/stutter before. download the sample files and you can test it on your TF.
the ONLY downside is that handbrake takes a while to encode but its worth it!
hope this helps.
..........
While I agree that, officially, Honeycomb doesn't support the mkv container. It must be able to parse it as it does support WebM and that uses the matroska container.
http://dl.dropbox.com/u/6553908/with_audio_mp3.mkv
This is the same video stream but with the audio re-encoded to mp3, plays nicely for me in the default video player it I tack ".mp4" on the end to fool the player into trying to play it.
I don't stream but everything e.mote said about hinting is spot on, also you may want to look at interleaving (a feature of the muxing that MP4Box can do) is you want to stream.
earlyberd said:
A full 1080p video at 5 Mbit/s would take forever to buffer on a tablet, so it's highly unlikely that you're getting the full quality over the network stream.
Click to expand...
Click to collapse
Way too generalized. I have a Playbook and it plays 1080p Youtube in the browser flawlessly.
I played The Cape clip from the example Handbrake settings thread. The clip plays with micro judder like every other clip with sound. I am now using a Prime 1.4 rooted not the stock firmware and it still does it. It is like frame drop every half or quarter second. If you have ever seen NTSC 23.976FPS played back on a PAL 50Hz CRT TV you will know what it looks like. It is very obvious on pans.
Surely I cannot be the ONLY person who can see this??? Are your eyes really that bad?
EDIT: Tried the MP3 version you provided. Still there. You can count the judder. Tick tick tick tick... every quarter second.
EDIT2: I guess the only way to demonstrate this to you guys is by way of a video of it along with some audio prompting from me to point it out to you (excuse the d(t)icks). You will notice that the audio drops out for some reason during playback but when it does the video plays buttery smooth. No idea why the audio drops out. I was playing back the MP3 muxed version from the link above using Moboplayer but this problem - the juddering - occurs with any player I have tried. The juddering happens on every single video I have tested it on when it is decoding audio.
http://www.youtube.com/watch?v=oXfdQP8BtEA
I will restate however. Yotube playback looks much smoother than playing a file from the inbuilt flash memory or SD cards.
I am having the same problem as you and I see the judder on these clips as well. I posted my issues in the encoding guide thread:
http://forum.xda-developers.com/showthread.php?t=1060825&page=9
It has nothing to do with the overall bitrate rate as many of my samples are <2,000 kbps, and just like you, if I remove the AAC audio, video is silky smooth. I assume it's just a software issue that should be able to be resolved, but I guess we'll see...
e.mote said:
BTW, if you recoded the clip, then I suggest using better settings. The settings used are excessive. When facing a device with marginal playback, there is less tolerance for bad encodes. If you're anal about playback, then you should be equally anal about your encode settings.
Click to expand...
Click to collapse
Thanks for that. But since your video judders just like every other clip that means diddly squat. I don't see why I should have to reencode every video I have in order for it to playback on the TF either. It should be able to handle 720p at least. It does play it but only plays it smoothly with no audio playback whatsoever.
bartleyg82 said:
I am having the same problem as you and I see the judder on these clips as well. I posted my issues in the encoding guide thread:
http://forum.xda-developers.com/showthread.php?t=1060825&page=9
It has nothing to do with the overall bitrate rate as many of my samples are <2,000 kbps, and just like you, if I remove the AAC audio, video is silky smooth. I assume it's just a software issue that should be able to be resolved, but I guess we'll see...
Click to expand...
Click to collapse
Phew! Thanks for chimeing in! I am glad it's not just me. Do you live in the UK perchance? If not that would rule out any UK specific reasons.
Nope, I'm in the US. My TF is also running Prime 1.4. I've tried the "stock" kernel and the OC kernel and the problem is the same with both. I didn't think to test video before rooting and installing Prime, so I can't vouch for whether or not it happens on completely stock HC 3.1
deadman3000 said:
http://www.youtube.com/watch?v=oXfdQP8BtEA
.
Click to expand...
Click to collapse
How... what...
Are you serious? I see literally no issue. Either my eyes or your camera, one of the two can't pick up this judder. And I did notice the compression in the better encode offered here (text, grappling hooks, lasers, pretty much anything like that. Not a bad result, but clearly visible)
Sent from my GT-P1000 using Tapatalk

Optimal video compression

I tried using handbrake to convert some standard definition video. I used the default H264 main profile settings. The video plays smoothly on any PC including a lowly netbook. When I play it on the Transformer it is very jerky almost as if every couple of seconds a frame is skipped. This happens on the video gallery app as well as Mobo. Are there any recommendations on compression settings or apps? By comparison, Youtube HD video plays flawlessly.
Thanks.
Using Anamorphic: strict and a constant quality of RF:22 I have been able to minimize the frame skipping of 1280x720 videos but not completely eliminate.
Thanks.
Isn't strange that the Transformer is having any difficulty at all? I am seeing the frame skipping with SD video (720 x 480). I am wondering if the Transformer just does a really poor job with H264 or if there some other way to encode video such that there is absolutely no issue with 480p or 720p video.
ryan stewart said:
Using Anamorphic: strict and a constant quality of RF:22 I have been able to minimize the frame skipping of 1280x720 videos but not completely eliminate.
Click to expand...
Click to collapse
I just checked what I was using and it was the same. Those are the default settings except for the RF22. I am using the default RF20 but considering I am only trying to encode 480p it makes no sense that the video should be choppy at all.
Setting Handbrake to Universal, then setting the encode to a constant 1Mb or 1.5Mb, seems to help, but its not perfect. The most important thing seems to be to downmix the audio from DD5.1 or whatever to plain old 2-channel AAC stereo or similar.
Rockplayer seems to be the best player I have tried so far. Mobo is OK.
Video rips for our Tranny's
Having some problems with this too..
Killing me as my Evo runs smooth video..
little disappointed I have to do so much work finding a way to play video's..
I will report back with my findings as I am playing with a few different players at the moment..
I too would like to just setup up a video rip system for the transformer that works without too many hassles..
dgcruzing said:
Having some problems with this too..
Killing me as my Evo runs smooth video..
little disappointed I have to do so much work finding a way to play video's..
I will report back with my findings as I am playing with a few different players at the moment..
I too would like to just setup up a video rip system for the transformer that works with too many hassles..
Click to expand...
Click to collapse
It'll be interesting to see what you come up with. I've been using handbrake with both main and high profile, and haven't had any trouble in the stock player, or any other player.

Video Converter Software

Hello.
Well, I have been trying to work my way round the Video Softwares for the Note.
I already have a good software - Badaboom which is nVidia Certfiied as it uses the GPU for both Encode & Decode.
The format that I use with it for the Motorola Xoom, same display resolution as the Galaxy Note.
However, I have noticed that the output is not as what it should be.
It seems a bit off.
The movie which I have encoded is a Full HD 1080p. - Original Size is 7.8 Gigs or so and the Rip comes out to 3.02 Gigs.
There is a little noticeable Lip Sync, but the picture is little different.
Have you tried MoboPlayer? It has a soft decode feature which can play back pretty much any format (no need to convert any files at all ).
DVD Catalyst?
Badaboom sucks. It's fast, but quality...meh. GPU encoding has a long way to go.
If you have a decent CPU and are not too technically minded try Handbrake, it works wonders.
I owned a Xoom myself. The screen is nowhere near as rich as the Note although they have similar pixel resolution.
I tried handbrake and it looks nice but doesn't take dvd rips, ie .vob files? But it will scan a dvd to rib? I alway rip my dvds with dvdripper on mac then convert them when i fell like it. Even though it seems more realistic to just rip the dvd to the desired format in the beginning.
Edit: so i tried some things. for awhile i was doing full dvd rips, then i started just doing main feature extraction(to save space) and in handbrake when trying to load the main feature rip it says no source found. When i select a full dvd rip it loads. Im assuming handbrake is looking for the audio ts folder among other things to think its a valid source ... Bummer because i save 1-2gb by not doing a full dvd rip...
MX Player will play .vob and almost all other formats.
Sent witH desire from One X
nahhush said:
Hello.
Well, I have been trying to work my way round the Video Softwares for the Note.
I already have a good software - Badaboom which is nVidia Certfiied as it uses the GPU for both Encode & Decode.
The format that I use with it for the Motorola Xoom, same display resolution as the Galaxy Note.
However, I have noticed that the output is not as what it should be.
It seems a bit off.
The movie which I have encoded is a Full HD 1080p. - Original Size is 7.8 Gigs or so and the Rip comes out to 3.02 Gigs.
There is a little noticeable Lip Sync, but the picture is little different.
Click to expand...
Click to collapse
Try VLC Player, Its only beta at the moment and is almost identical to mx player, I use it on my pc and you can adjust audio sync and stuff, I'm sure these features will be available soon on the android version.
Sent from my HTC One X using xda premium
I have to say I am not sure what you are trying to do here, have you ripped a DVD to VOBS and then try to encode it again?, why don't you just rip the DVD straight to a compatible file with a compatible codec that your PC, Phone and Tablet can handle.
Most devices can handle a 1080p Hn64 high profile rip as long as you have summed audio channels to stereo, this way you can have very large bitrates and upscale your DVD's to play on your PC as well. Playing them on your Tablet and phone will be smooth if you use the sammy video player as hardware acceleration will come in to play.

Categories

Resources