when i connect my htc desire via usb to the keyboard dock and i select "mount as removable disc" i cannot then find the phone's sd card in either the stock file browser on the transformer or in ES file explorer.
the card appears to mount as i lose access to my sdcard only apps on the desire but there is no popup screen on the transformer like you get with a usb flash stick for example.
any help getting the sdcard mounted via usb (i definately dont fancy removing the card from the phone just to copy a few files).
i know there are bluetooth options to workaround this but they are slower and less reliable than a usb cable.
thanks in advance!
gunswick said:
when i connect my htc desire via usb to the keyboard dock and i select "mount as removable disc" i cannot then find the phone's sd card in either the stock file browser on the transformer or in ES file explorer.
the card appears to mount as i lose access to my sdcard only apps on the desire but there is no popup screen on the transformer like you get with a usb flash stick for example.
any help getting the sdcard mounted via usb (i definately dont fancy removing the card from the phone just to copy a few files).
i know there are bluetooth options to workaround this but they are slower and less reliable than a usb cable.
thanks in advance!
Click to expand...
Click to collapse
I'm wondering the same thing
I don't know if you tried this, but I use dropbox to move files around between devices.
yeah i use dropbox but obviously a direct transfer of the files with a usb cable will be much quicker and simpler. with dropbox you have to upload files (for example 2gb of music) which would take hours, and then download it again taking a long time.
to transfer 2gb with the usb cable takes 5 minutes max!
i suppose i could use a pc in the middle, so mount the phone's sdcard and then mount the tfr itself as and use the pc to copy paste between them but thats a pain as i dont want to need 3 devices for these things.
bluetooth is ok for small files like apps etc but not for anything larger
Have you managed to mount the Transformer to a PC with a drive letter assigned to it? The Transformer always shows up as a Portable Media Player, which doesn't allow me to mount it with a drive letter.
I am trying to sync some files to the Transformer, but need a drive letter for my sync software to work.
gunswick said:
when i connect my htc desire via usb to the keyboard dock and i select "mount as removable disc" i cannot then find the phone's sd card in either the stock file browser on the transformer or in ES file explorer.
the card appears to mount as i lose access to my sdcard only apps on the desire but there is no popup screen on the transformer like you get with a usb flash stick for example.
any help getting the sdcard mounted via usb (i definately dont fancy removing the card from the phone just to copy a few files).
i know there are bluetooth options to workaround this but they are slower and less reliable than a usb cable.
thanks in advance!
Click to expand...
Click to collapse
If the transformer properly finds the removable device it will go in /Removable/ The phone SD cards don't seem to trigger the transformer to mount external storage. You'll see the popup for like a split second. My guess is that it has something to do with the file format. I'm not sure though.
Any solution to this?!
I succeeded to mount phone's microsd properly but not my Internal sdcard.
If you still can't figure out how to mount your external sd just plug your phone into the dock, go to settings > memory > scroll all the way down and then mount the storage .
Oh, I think that you've to be on Honeycomb 3.2 btw
This allows you to mount your external mocro sd but not your internal.
Related
I'm a Nexus One owner, previously G1/MyTouch3G also, so I'm no n00b.
With all Androids, if you have a microSD card, you just plug in the USB and you can mount the microSD card as a drive and copy stuff to it. Which is necessary since we have stupid small ass internal storage. Also it's where we copy pictures/mp3s to it.
So now, with the Samsung Galaxy S series of phones with 16 GIGS of internal storage, how do we ACCESS this storage from the PC so we can copy pictures/mp3s to the internal storage? Is there a way to MOUNT the internal storage?
I haven't read a SINGLE thing about this.
It would REALLY suck if we had to manually do it: Mount microSD, copy stuff to it, unmount, use a file explorer on the phone itself and manually move the files into internal storage.
Yeah there's probably root apps and such that you can ssh in, or use adb to transfer, but that's NOT ideal.
Would be nice is the internal storage auto mounts when mounting microSD like Garmin GPS systems. Garmin GPS systems have SD card slot, when you plug it in, you can see the INTERNAL Garmin memory as well as whatever is on the SD card. (You'll see 2 removable storage devices mounting in Windows).
I think when it's plugged in, the normal notice pops up in the notification bar. But instead of just asking you to mount, it asks if you want to mount internal or the sd card.
nxt said:
I'm a Nexus One owner, previously G1/MyTouch3G also, so I'm no n00b.
With all Androids, if you have a microSD card, you just plug in the USB and you can mount the microSD card as a drive and copy stuff to it. Which is necessary since we have stupid small ass internal storage. Also it's where we copy pictures/mp3s to it.
So now, with the Samsung Galaxy S series of phones with 16 GIGS of internal storage, how do we ACCESS this storage from the PC so we can copy pictures/mp3s to the internal storage? Is there a way to MOUNT the internal storage?
I haven't read a SINGLE thing about this.
It would REALLY suck if we had to manually do it: Mount microSD, copy stuff to it, unmount, use a file explorer on the phone itself and manually move the files into internal storage.
Yeah there's probably root apps and such that you can ssh in, or use adb to transfer, but that's NOT ideal.
Would be nice is the internal storage auto mounts when mounting microSD like Garmin GPS systems. Garmin GPS systems have SD card slot, when you plug it in, you can see the INTERNAL Garmin memory as well as whatever is on the SD card. (You'll see 2 removable storage devices mounting in Windows).
Click to expand...
Click to collapse
No luck accessing internal RAM from me either (and I think other reviewers on CNET had the same bad luck)...Just got mine on Friday, and it is great except for connecting to the PC (64bit Vista) looping through MTP mode (the device keeps flashing back and forth between main screen and MTP mode, and the PC keeps trying to install the right driver to access the device as a USB mass storage device). Multiple restarts and messing with the device in Device Manager yielded no results, so I just used removable SD card to add files to the device. That obviously works fine, but is irritating.
Anyone else having trouble accessing Captivate as Mass Storage Device?
Best wishes to all.
I can't tell if you're using the Captivate driver located here.
Loosely related...I'm curious as to whether all the work going on in the Modaco SGS forums to optimize I/O (such as this) is applicable at all to the Captivate...anyone know?
I installed the driver on my Win7 machine.
I set up the USB to ask when I plug it in. I select Mass Storage. Two drives show up in the list of drivers, but when I click either one, it says "Please insert a disk in the removable disk".
What am I missing?
[EDIT]
Hang on, there was a window behind my windows with a message about install failure, device unplugged. Trying again.
[EDIT2]
Installed again. Didn't get error. Using same method as above, still no go.
So then I select PC Internet the next time I plugged in the USB cable, and it then gave the Windows POPUP saying Installing Drivers, and finished with Ready to Use. But, now I don't see the drives in Explorer. So I launched Windows Mobile Device Center...didn't see anything.
In settings goto Applications > USB Settings > select "Mass Storage" and viola!
moosefist said:
In settings goto Applications > USB Settings > select "Mass Storage" and viola!
Click to expand...
Click to collapse
I have the popup set to ask, and as noted in my post, I did select Mass Storage first couple times. It does show drives, but but when I click either one, it says "Please insert a disk in the removable disk".
Thanks for the suggestion though.
The windows 7 drivers for htc android phones are hosed in general for me. I have to use linux in a virtual machine to access ANY htc android phone.
once you hit mass storage, if you bring the notification bar down, you can click the "usb" setting and select mount. Perhaps that will work? (or is that for mac only?)
once you hit mass storage, if you bring the notification bar down, you can click the "usb" setting and select mount. Perhaps that will work? (or is that for mac only?)
yes, when you do this you will be able to access both drives without it asking you to insert a disk
I am new to android so I had this problem for a while. But you made my day madjsp. I have been trying to get this phone connected to my pc for the past 2 days, but with very little success. The kies software detected my phone only twice. But this connection was very erratic. Just to copy 200mb of photos the link showed a transfer time of 7 hours. The device would often disconnect itself after like 10 secs.
But until samsung fixes their software and drivers, the mass storage option works very reliably for transfering files between pc and (internal+external) sd cards.
My directions:
1) Choose the Mass storage option in USB settings of the device
2) Then connect to the comp.
3) There should be a message in the notification bar: "USB connected. Select to copy files to/from your computer" . Tap the notification and select mount from the popup.
Now you can view both sd cards from pc and transfer files to/fro w/ ease.
The last step is the most important one. For all those having the problem where clicking the drive in the pc reads "Insert a media into the drive", this should fix the problem. Maybe it is something android specific that I didn't know...
Same thing happen to me, i found drivers on this site and instead or hitting mass storage when it is connect to PC, I hit media PLAYER and it worked fine i was able to see the 16GB and my SD card, Loaded music and videos and pics with no problem, also remember only plug into the back of computer. you can find drivers on this site that will work on like pages 3-6
doomah69 said:
Same thing happen to me, i found drivers on this site and instead or hitting mass storage when it is connect to PC, I hit media PLAYER and it worked fine i was able to see the 16GB and my SD card, Loaded music and videos and pics with no problem, also remember only plug into the back of computer. you can find drivers on this site that will work on like pages 3-6
Click to expand...
Click to collapse
Selecting Media player worked for me as well. I now can see and have access to both my internal and external / removable SD card. Good lookin' out!
My first thread that I can call my own.
Question for you all. Is there an easier way to transfer files over the the GTAB then having to pop out the SD Card and put it into an adapter and then into the computer and then out of the computer, out of the adapter and back in the GTAB?
Because every time I mount the USB, it only mounts the "internal" SD Card. Is there some sort of way to get it to mount both the internal and external SD Card?
I hate messing with the external SD Card. All the "popping in and out" makes me nervous.
I even tried mounting the internal SD Card and then copying the movies/music/etc.. over to the external SD Card via a file manager... but that is DAMNNNNN slow.
I haven't found a way (yet). Given that neither the zPad or TnT stock builds work, I'm thinking it's not that easy to do. Drives me nuts as well because I really don't want to keep taking the card out over and over and potentially damage it, over time.
That's exactly what I am worried about. LOL
I can just picture not paying 100% attention and snapping the card in half or, breaking the "locking" mechanism that holds the card in place.
roebeet said:
I haven't found a way (yet). Given that neither the zPad or TnT stock builds work, I'm thinking it's not that easy to do. Drives me nuts as well because I really don't want to keep taking the card out over and over and potentially damage it, over time.
Click to expand...
Click to collapse
If you have ADB, can you do adb pull or push?
Jim
My workaround has been to use the LAN tab in ES File Explorer to copy data wirelessly to sdcard2. Probably not the speediest method but it keeps the card in place.
The techie/hacker solution to easy file transfer is to use the Rsync for Android app in the market store. Once you have it setup, (not the easiest thing to do) it works great for moving files automated from your gtab back to an rsync server (my linux box to the rescue). I even have a secondary profile to get it to reverse rsync a specified directory FROM my linux box to my gtab. Presto -- easy file transfer via wifi!!!
Also, another idea might be to use Dropbox?
Jim
P0RT3R said:
My workaround has been to use the LAN tab in ES File Explorer to copy data wirelessly to sdcard2. Probably not the speediest method but it keeps the card in place.
Click to expand...
Click to collapse
I do the same thing. It's mighty slow, but it works.
roebeet - an idea that almost worked - maybe you know why?
roebeet said:
I haven't found a way (yet). Given that neither the zPad or TnT stock builds work, I'm thinking it's not that easy to do. Drives me nuts as well because I really don't want to keep taking the card out over and over and potentially damage it, over time.
Click to expand...
Click to collapse
Hi,
You all got me curious, so I just tried the following:
- Created a dir under /mnt/sdcard, /mnt/sdcard/mymnt
- Get temp root (z4root)
- Start terminal
- su
- mount -t vfat /dev/block/vold/179:17 /mnt/sdcard/mymnt
At this point, I can access the sdcard2 by using /mnt/sdcard/mymnt or simply /sdcard/mymnt.
So, I disabled USB debugging, and I get the popup asking if I want to activate USB transfer (I'm on 3452, on earlier TNT firmware, it use to say enable USB storage).
I click the button to Activate, and then another window pops up, and I click Activate.
Then, the popup just stays there, with the spinning thing. It never enables USB transfer, and, on my PC, I see the removable drive, but when I click on it, it says it's not ready.
I've also tried umounting /mnt/sdcard2, thinking that it might be confused because of the two mounts to /dev/block/vold/179:17, but it still does the same thing.
So:
- It looks like I can mount the /dev/block/vold/179:17 (the external microSD card) under /mnt/sdcard, and
- When I do that mount, I can see the contents of the external microSD card in terminal under /mnt/sdcard/mymnt and under /sdcard/mymnt, but
- For some reason, turning off USB debugging/activatiing USB transfer fails.
Maybe someone can figure out why activating the USB transfer fails. If we can figure that out, then that would allow seeing the external microSD card via the PC USB interface.
Jim
I think it would need to mount both volumes -- the internal SDcard and the external SDCARD2 -- separately...
Using a mount (reparse) works internally since they are on the same device -- but if you try to mount SDCARD externally it doesn't understand the reference to SDCARD2
My phone actually mounts to the computer as two drives -- one for internal (SDCARD) and the other for external (SDCARD2)
I'd assume there is a way to have something similar work on our gTablets...
I'll have to slap a spare microSD card into the tablet to try though...wondering if teh INF needs to be tweaked as well (??)
From what Ive seen or experienced, Cyanogen was the only rom that Had the Sd card and Sd card2 Thing fixed right (with exception of having to plug in the Power cord before mounting). Evrey other Rom seems to have problems. But Cyanogen has way too many other problems so I use Vegan since to me it seems the most stable :s
Yeah -- my phone is running a fork from Cyanogenmod 6...so the code is shared
TeutonicWolf said:
I think it would need to mount both volumes -- the internal SDcard and the external SDCARD2 -- separately...
Using a mount (reparse) works internally since they are on the same device -- but if you try to mount SDCARD externally it doesn't understand the reference to SDCARD2
My phone actually mounts to the computer as two drives -- one for internal (SDCARD) and the other for external (SDCARD2)
I'd assume there is a way to have something similar work on our gTablets...
I'll have to slap a spare microSD card into the tablet to try though...wondering if teh INF needs to be tweaked as well (??)
Click to expand...
Click to collapse
That's the problem... When the Gtab is plugged into the PC USB (while USB debug is disabled), only one new "drive" appears, corresponding to /sdcard on the Gtab. There is no 2nd drive appearing on the PC corresponding to /sdcard2 on the Gtab.
I've been looking at my Windows configuration, with the Gtab plugged in, and the one drive that appears shows up under "Portable Devices" branch in Device Manager. The properties show that it corresponds to "wpdfs.inf", and looking through that, it looks like a generic USB Mass Storage configuration, i.e., a USB drive.
I still think that something would need to be fixed on the Gtab end for the two drives to appear on the Windows end.
Jim
app fix
I have found a workaround for the issue with the installation of a single app:
http://forum.xda-developers.com/showpost.php?p=12299831&postcount=2
Depending on what you want to do, an FTP solution is also possible as discussed in this thread:
http://forum.xda-developers.com/showthread.php?t=869844
By using swiFTP, I am able to open a connection through a Win7 windows explorer, and I can drag-and-drop files to SDCARD2 (over a wireless connection). I put a 1Gig movie on the card and it took about 12 minutes.
Another option is to use Multi Mount SD-Card. This is link is for the lite version, there is also a paid version.
This app works outside the embedded SD Card Mounting scheme that comes with Froyo.
With this you dont have to press the "Mount USB" button that comes up in the notification bar when you attach the USB cable. Instead it will auto-mount the either the internal or the external SD Card when you plug in the cable.
(Having configured the setting of your choice before hand).
Unfortunately it can not mount both at the same time.
It works with my GTAB and I'm using VEGAn 5.1 Beta.
(Without the 5.1.1 Suppliment patch)
Folks are still struggling with this?
Use a USB flash drive, I do it all the time. Just a regular, boring, Windows FAT-formatted flash drive.
Wow it is amazing that this problem still exists.
I am a new owner of a Gtab and have had it for less than 2 days. Thank goodness for the many informative posts on this site, that have helped me make my new toy almost perfect.
I updated to 3588, installed cwm and titanbackup, vegan5.1.1 including the suppl patch and even learned how to tether it to my Samsung Captivate. The one thing that was annoying me was my device not seeing the 16 gb microsd card that I had inserted both in the gtab and on my pc.
After reading this thread, it looks like I am not going crazy, but it seems like my device is destined to not acknowledge this addtional storage in it's settings?
I really was hoping to use the external card for videos and my mp3 collection, so I am missing something or did I do something wrong to make this happen?
I would appreciate any comments or suggestions since this is the only thing that I need to get squared away before I install more apps(with the possibility and ever present threat of having to re-install something I may have already done)
I could not post this question in the dev section since I do not have enough posts to allow me to.
Thanks
Tina
Hello ppl,
I have been facing an irritating problem with my transformer when trying to mount an external storage device, be it SD cards, thumb drives or portable beds.
On plugging them in, the transformer doesn't seem to detect them at all. The lights don't blink, no notifications in the bottom right, and no files in the file manager.
I read about some solutions in other forums like restarting the device, but Restarting the TF doesn't work. The only way I can read the drive is if I restart the TF with the drive plugged in.
Also, when I safely remove the drive, an empty folder labelled removable disk still remains in the file manager. I can't seem to delete this folder.
I noticed this problem beginning when I once physically disconnected my portable hdd without safely removing it.
Is there any solution to this? I am tired of having to reboot my Tf everytime I want access some external drive.
Thanks
I have the same problem with my transformer dock. It works sometimes, and doesn't work other times. I can't find a pattern. It will read usb drives sometimes, and my SD card sometimes. The onboard microSD always works thought.
My External HDD is always recognised - I plug it in and works.
Other devices need to be mounted manually - Go to Settings > Storage > Scroll down to the drive is not mounted > and Select Mount.
I have to do this with my pendrive and HTC desire - but I never had to restart.
Hello,
New to Android and new to this forum. I have my TF700T two weeks now and I'm glad I bought it. My target is to copy the content of my Compact Flash cards (16GB each - from my DSLR) to a portable hard drive. Therefore I tried to connect both a card reader and a portable hard drive via an auto-powered USB-hub to the only usb-connection of my tablet. I even tried with another hub and even with a third hub. The only result was that my tablet only found the first device that was connected (regardless wich one: the CF-card or the HD) with the hub and not both at the same time, so copying from the CF-card to the drive isn't possible in one step. Sure I can copy the CF-card to the internal memory of the tablet and in a second pass move it to the HD, but that is very time-consuming.
Anyone who knows how to connect more then one usb-device at the same time via a powered USB-hub and do a file transfer between them? Your help is greatly appriciated.
You can use wi fi transfer to do it with a file manager, like file expert.
tbtaf said:
You can use wi fi transfer to do it with a file manager, like file expert.
Click to expand...
Click to collapse
@tbtaf: When on vacation or on a photo trip I only have that portable hd, my tablet and a powered usb hub. I think a Wifi appraoch is not applicable then. Or am I missing something?
Sounds like you need to setup a second mount point for the additional device - don't know if that can actually be done or not, but I do know that some people who could not even connect the first device were able to manually specify the device by mounting it in a terminal window.
I'm not sure 100% on the code, but let me try to find out.
Or you could copy the 16 Gb CF card onto the pad's internal memory (or external MicroSD card), disconnect it, connect the HD and then copy it out again.
HeartWare42 said:
Or you could copy the 16 Gb CF card onto the pad's internal memory (or external MicroSD card), disconnect it, connect the HD and then copy it out again.
Click to expand...
Click to collapse
He already mentioned, he doesn't want to do this, he wants to copy straight.
For now, it's not possible since the powered hub or non power hub unable to recognize 2 devices at the same time.
CF, now there's nostalgia if anything. I thought those became outdated over 3 years ago... Fact is the CF is hardly compatible with mobile devices these days.
No, you can't copy from an external cardreader directly onto an external HDD through your tablet. It can only read 1 storage device in the USB port. Multiple devices works, but multiple storages doesn't. Some people have had some success with USB Flashdrives/Pendrives instead of HDD's though. You could try that.
You can copy from an SD to HDD easily though, so you could consider using an SD with a CF adapter if your camera has no SD slot. (SD's have the added advantage that the pins can't bent.)
I have a Razr Maxx HD, updated to Jelly Bean, and a USB OTG cable. I have been trying to access folders and files on both a camera SD card and a USB flash drive, but have had no luck.
In SETTING>STORAGE I see the USB (or SD card) gets mounted for the system as USB DISK /STORAGE/USBDISK_1.1.1
However, I can not find a route through the FILES app to access the drive or SD card.... What am I missing?? I have download a couple apps for files access (File Expert, currently), but still do not see anything added through the USB OTG cable....
Now I know I'm a NOOB
lwwill7999 said:
I have a Razr Maxx HD, updated to Jelly Bean, and a USB OTG cable. I have been trying to access folders and files on both a camera SD card and a USB flash drive, but have had no luck.
In SETTING>STORAGE I see the USB (or SD card) gets mounted for the system as USB DISK /STORAGE/USBDISK_1.1.1
However, I can not find a route through the FILES app to access the drive or SD card.... What am I missing?? I have download a couple apps for files access (File Expert, currently), but still do not see anything added through the USB OTG cable....
Click to expand...
Click to collapse
Even thought I have been working with computer systems and programming since the early 1980's, [even worked with Andy Rubin on the first email program for our college computer system (and we have been friends ever since)], I still have some issues getting used to new devices:laugh:
I found my own answers within the File Expert app, after a bit more playing around. Even though the tab for folders only listed the default SD Card, External SD Card and Phone Internal Storage, selecting the "External SDCard" and then clicking on the address box at the top allows backing up to the "/Storage" folder and then out to the "USBDISK_1.1.1" folder and accessing the files...
Hope this will help anyone else with issues, as I found nothing on this site addressing this question :victory:
Now I just need to find a small SD Card reader that will handle my class 10 SD cards from my Nikon DSLR so I cam post to the web during our trip to Hawaii in May, as I am leaving the laptop home, just the Razr Maxx HD and possibly a new tablet (Xoom?)