Hi,
I did a search but received no hits. Does anyone know if the Transformer will work on a Wireless-N 5GHz band? I have a Linksys E3000 router setup at home using the stock firmware. I have Wireless-G setup on a 2.4GHz band for my Sony Dash and BlackBerry 9700. I have Wireless-N setup on a 5GHz band for my laptop and another router acting as a wireless bridge for my PS3. The reason I use 5GHz is because I was getting too much interference with the 2.4GHz band. There's a lot of construction in my area that disrupts my network if I use the 2.4GHZ band(determined through testing). I noticed the Motorola Xoom supports it, but haven't found anything for the Transformer.
WG
Only 2.4Ghz wireless N
Sent from my Asus Decepticon using Tapatalk
As said only 2.4GHz which is a pretty big fail for Asus as even my Samsung Galaxy SII has it and its becoming the norm. I've now had to revert everything back as had it all setup for 5GHz. I just found I had far less signal drops on 5.
weirdg said:
Hi,
I did a search but received no hits. Does anyone know if the Transformer will work on a Wireless-N 5GHz band? I have a Linksys E3000 router setup at home using the stock firmware. I have Wireless-G setup on a 2.4GHz band for my Sony Dash and BlackBerry 9700. I have Wireless-N setup on a 5GHz band for my laptop and another router acting as a wireless bridge for my PS3. The reason I use 5GHz is because I was getting too much interference with the 2.4GHz band. There's a lot of construction in my area that disrupts my network if I use the 2.4GHZ band(determined through testing). I noticed the Motorola Xoom supports it, but haven't found anything for the Transformer.
WG
Click to expand...
Click to collapse
Try changing the channels on your 2.4 ghz settings to minimize interference.
http://en.wikipedia.org/wiki/List_of_WLAN_channels
jerrykur said:
Try changing the channels on your 2.4 ghz settings to minimize interference.
http://en.wikipedia.org/wiki/List_of_WLAN_channels
Click to expand...
Click to collapse
I already tried that. I was running a Wireless-G network before, and no matter which channel I changed to, there was always interference. That was the primary reason why I upgrade to a Wireless-N network on 5GHz band. Although, I haven't tried Wireless-N on a 2.4GHz band yet. I might get around to giving it a try one day.
WG
I just did some digging around and it turns out the TF uses the BCM4329 radio chip. According to the specs it should be able to support Wireless-N on a 2.4GHz and 5GHz band. I hope Asus enables 5GHz support in a future update. All we can do is wait and see I guess.
WG
They probably never wired the trace on the pcb for the 5GHz, it also needs another antenna
Sent from my Transformer TF101
Related
I have noticed on my Nexus S that when I do a speedtest over the wireless it caps out at like 5Mbps and when I watch my router control panel for the thoughput speed it peaks at 8.5Mbps yet if I do it from my laptop the speedtest on the same server reaches 32Mbps and the router is putting out 37Mbps over the wireless.
My router is in G-only mode and forcing 54Mbps since all my devices are G/N capable. Is anyone else noticing slowness with their wireless on their Nexus S?
Mine is rooted running Netarchy's 1.2.2+BFS kernel
Just ordered my TF... was wondering if it would be able to pick up 5ghz WiFi, or is it only capable of 2.4
Sent from my 1.5 GHz dual core beast.
See technical specs 2.4 only.
Wireless Data Network WLAN 802.11 b/g/[email protected]
Bluetooth V2.1+EDR
It's 2.4GHz only.
Wi-Fi Band
Mine wouldn't connect to my 5 GHz band router. Should have checked that before I bought it!
Tonight I was doing a little remodeling with my home's wireless network setup. I basically decided to get my own modem rather than paying Comcast's $7 / month for renting the POS they give subscribers. I bought a docsis 3.0 modem off amazon for about about $80. It arrived today.
Part of the remodeling was to move the modem and my linksys WRT300N wireless router to my office, where there is no coax cable outlet, so I had to run a wire through my walls to make this happen.
Anyway, after I got everything moved to my office, I decided that to keep things moving fast I would configure my router for N band only, rather than B G N, or G N. However after I did this, my phone no longer could connect to my router. So my question is does the Sensation support N band networks? I am running a Cyanogen variant ROM, but I wouldn't think this would affect anything.
Any thoughts?
It supports 2.4GHz N, but not 5GHz.
So I'm thinking of getting that new badass Linksys N900 given the superb ratings & review and because I have like an 8 year old wireless router. So here are my basic questions.
1. Currently I have a 4 port Lynksys router connected to my cable modem and I have 3 computers hardwired to that. Off the final 4th port I have a Lynksys wireless router which is mounted up higher. I do this as my wireless router does not have enough ports to handle the 3 computers I want hardwired. SO I have always wondered ... am I losing wifi speed by having a wireless router connected to my router?
2. Should I cut that router on router setup out if I go to a new wireless router that has points for hardwired connections?
3. On this new Lynksys do you think it makes a difference - in terms if getting access to farther places in my home AND higher speeds all over the home - if I mount this way up high on a wall versus on my desk?
Lock-N-Load said:
So I'm thinking of getting that new badass Linksys N900 given the superb ratings & review and because I have like an 8 year old wireless router. So here are my basic questions.
1. Currently I have a 4 port Lynksys router connected to my cable modem and I have 3 computers hardwired to that. Off the final 4th port I have a Lynksys wireless router which is mounted up higher. I do this as my wireless router does not have enough ports to handle the 3 computers I want hardwired. SO I have always wondered ... am I losing wifi speed by having a wireless router connected to my router?
2. Should I cut that router on router setup out if I go to a new wireless router that has points for hardwired connections?
3. On this new Lynksys do you think it makes a difference - in terms if getting access to farther places in my home AND higher speeds all over the home - if I mount this way up high on a wall versus on my desk?
Click to expand...
Click to collapse
Probably not the best forum to post this on (a networking forum would probably get you a much better answer, but:
1. No. As long as you're connected with 100/1000mbps, the WiFi radio itself is the limiting factor. Piggybacking two a router off a router won't have a noticeable effect on your transfer speeds.
2. To see the maximum benefit fron N900, you will need to be using clients (adapters) that support 3x3 spatial streams over the 5GHz spectrum, and that also clearly state they support '900'). These are not built into the majority of devices, and are quite expensive as far as adapters go.
You will notice some improvement in range regardless of whatever clients you connect (more powerful radio in the router), but if you're using single stream N clients (smartphones, iPads, cheap laptops etc.) You won't see any improvement on actual throughput at all assuming your old router was 'N' capable. If it was 'G' only, it's worth upgrading to N if you do a lot of local transfers, if you have a lot of clients, or if you stream audio/video a lot.
I hope this kinda helps and doesn't confuse you more, sorry but it's really not my strong suit. There's an excellent Australian forum called Whirlpool which is dedicated to networking and ISPs, although the regional stuff may not be relevant you may find a better answer there.
Good luck!
Have you considered flashing your Linksys router with DD-WRT or Tomato? There are lots of "how-to's" with a quick Google search; and it may solve your problems...particularly #3.
jdmarano said:
Have you considered flashing your Linksys router with DD-WRT or Tomato? There are lots of "how-to's" with a quick Google search; and it may solve your problems...particularly #3.
Click to expand...
Click to collapse
I do not.. I will look into it as I am not even sure what his means.. but if it is in Google, I will research
Edit... BEFSR41 router not supported, WRT54G wireless is supported.. now to find out more
Maybe my stuff is not as old as I thought and still useful? Or is it in fact dated like I think and I am losing out?
BEFSR41 router
WRT54G wireless
Lock-N-Load said:
I do not.. I will look into it as I am not even sure what his means.. but if it is in Google, I will research
Edit... BEFSR41 router not supported, WRT54G wireless is supported.. now to find out more
Maybe my stuff is not as old as I thought and still useful? Or is it in fact dated like I think and I am losing out?
BEFSR41 router
WRT54G wireless
Click to expand...
Click to collapse
Ah the old WRT54G. One of the best and most customisable routers ever made. Unfortunately, in this day and age it'll also be your bottleneck. G wireless maxes out at 54mbps. Even single-stream N wireless (common on phones and tablets) maxes out at 72mbps. Even budget implementations of N in laptops, desktops etc. generally use 150mbps max throughput. There are all theoretical numbers, and don't include overheads or anything like that.
The other thing you need to consider is whether you are aiming to boost file transfer speed, or internet browsing/gaming/streaming speed. Boosting your wireless gear will get all your clients talking as fast as they can, but there'll be no benefit in it for you at all if you're on a 2mbps ADSL connection. Even B wireless can handle that.
If it's LAN transfers and LAN gaming you're going for, then the wireless upgrade is a winner. If it's internet-side speeds you want to boost, you may be better off putting the money into a higher-speed broadband plan
I am looking at buying an Asus Transformer TF300T, and the only thing missing from making this tablet perfect is the lack of 5ghz support for this tablet. Has anyone been able to make a usb dongle work with this tablet. (Note the dongle has to be dual band otherwise it defeats the purpose). I am hoping that it will plug and work, but I am open to installing a driver. I am waiting on imput before I go out and buy the brand of Usb dongle that works.
Thank you for your time and effort
tbruff13
Just wondering, why 5ghz? In my experience, 5ghz is slower and less range.
I am in a dorm where everyone has there own networks.
zaner123 said:
Just wondering, why 5ghz? In my experience, 5ghz is slower and less range.
Click to expand...
Click to collapse
but no one has a network on the 5ghz and I have a dual band router. I dont need the range. I just need some free spectrum. and the ability of all of my devices to use it, and I love this tablet because of price and features, and I can live with a dongle that I only need while in my dorm room