HELP! Don't think this is a brick.. - Captivate General

I was installing ClockwordMod, and the phone reset, then goes to the recovery installation and says replacing stock recovery with clockwordmod, then restarts, goes to recovery installation saying replacing stock recovery with clockwork mod.. and repeat.. wtf?

no button method seems to be working, phone isnt on long enough to be picked up by odin, just goes back to the installation, battery is charged, is there a way to stop the replacing?

adb reboot download

I'm installing sdk right now. hopefully it can interrupt the loop pre cwm

jinsoku3g said:
I'm installing sdk right now. hopefully it can interrupt the loop pre cwm
Click to expand...
Click to collapse
I know you said none of the button combos are working but try this if you cannot get adb to work:
1. Remove your battery, external SD card and SIM card
2. Reinsert battery.
3. Hold down both volume buttons and while holding them down plug the phone in.
hopefully that helps.

nope the buttons dont give it any kind of reaction, just goes backinto the replacing the stock recovery. i installed the sdk but cant seem to figure out the adb side

adb will not recognize. oh my gawd.

is there a way to erase the internal sd card? i think it just keeps applying an update zip and the update zip is a RENAMED CWM.. has to be what it is.. no button methods work for me,, and restarts before it can connect

anybody? i was the only one on the IRC room. Every guide I find talks about hitting buttons

Thank a Jig.

Related

My last hope to unbrick?

The phone is bricked. I flashed to the i9000 firmware and was about to root the phone and didn't bother to flash the new kernel yet. I get into recovery to go to reinstall packages to install the root, and to my surprise the power button didn't work to select since I had the wrong kernel. SO I do adb reboot download and then I try to flash the new kernel. Odin just freezes there and doesn't do anything, I unplug the data cable and then it says FAIL! on Odin. I take out the battery and put it back in to see if the phone will still boot, and now I'm stuck on the phone/computer. People have tried helping and they told me about every single key combo to put it in download and none of them work. When I told Vol+ and power the screen flashes black and then I wait for it to do it the second time and i let go of the power and it stays there at phone/computer. I've done everything I can possibly see to do it and this is my last hope to get it to work again, or else I have to take it to AT&T and lose all my stuff on the internal SDcard.
EDIT: AT&T refuses to replace the phone.
From designgears' one click Odin thread. Not sure if you tried this, but it might work.
Good luck.
EDIT: realized it might be helpful if I included the link to the actual thread. Sorry about that.
http://forum.xda-developers.com/showthread.php?t=731989
designgears said:
WARNING: "MASTER CLEAR" WILL WIPE YOUR BUILT-IN STORAGE!
I am not responsible for any damage caused to your device.
What is this?:
If you see the "phone+!+computer" screen, you need this! If you deleted something you shouldn't have and can't get it back on your phone, this is probably your best bet. This is the Odin3 One-Click Downloader for restoring your phone from a completely software bricked state, or for whatever purpose you see fit to use it for. You don't have to change any settings, it is all pre-packaged and ready to go.
If this has helped you out, please consider buying me a beer!
How to use:
Download and install the correct drivers below (mac and linux don't need drivers)
Plug in your usb cable to your phone and computer
Open Odin
Enter Download Mode (see below)
Click Start
Be Patient, the first boot will take a while
How to use Master Clear:
Boot your phone up normally with usb debugging on
Click Master Clear
How to enter download mode:
Method 1ADB - from recovery or normally booted with usb debugging on)
Open a cmd prompt/console/shell
adb shell
adb reboot download
Method 2KEY COMBO)
Remove the battery, sim card, sdcard if you have one
Insert the battery
Hold Volume Up + Volume Down + Power
Method 3KEY COMBO)
Remove the battery, sim card, sdcard if you have one
Insert the battery
Hold both Volume buttons (from i9000 just down, don't touch the power button)
Plug in the USB cable and continue holding both Volume buttons
Drivers:
Windows 64bit
Windows 32bit
I897UCJF6 - Odin3 One-Click Downloader:
http://www.thevod.org/misc/captivate/I897UCJF6-final-OCD-REV0.rar
The internal beta's are NOT one-click, please read the linked threads
UPDATE: I897UCJH2 (Internal BETA)
You can get it here
UPDATE: I897UCJH3 (Internal BETA)
You can get it here
Click to expand...
Click to collapse
deuX` said:
From designgears' one click Odin thread. Not sure if you tried this, but it might work.
Good luck.
EDIT: realized it might be helpful if I included the link to the actual thread. Sorry about that.
Click to expand...
Click to collapse
Yeah I've tried this already. Nothing will work.
Is there anyone that can help X_x
what did you tell att and what did they say?
di11igaf said:
what did you tell att and what did they say?
Click to expand...
Click to collapse
"We can't replace the phone since you are not the original buyer of the phone. Talk to the person you traded with to get the receipt"
Apparently my phone was stolen because when I mention the receipt, he doesn't reply.

unbrick samsung galaxy s vibrant.

i have a real problem, trying to flash my samsung vibrant with odin, (installing the unofficial update) my phone was bricked, i cant get into download mode, the key combination vol-up + vol-down to get to download mode is not working, i can't get into recovery mode either, (well getting into recovery mode has never worked) i tried using adb reboot recovery with sdk and it comes as device not found.
Am i screwed or there is any way to unbrick?
cervantesjc said:
i have a real problem, trying to flash my samsung vibrant with odin, (installing the unofficial update) my phone was bricked, i cant get into download mode, the key combination vol-up + vol-down to get to download mode is not working, i can't get into recovery mode either, (well getting into recovery mode has never worked) i tried using adb reboot recovery with sdk and it comes as device not found.
Am i screwed or there is any way to unbrick?
Click to expand...
Click to collapse
Take out the battery, wait a full minute. put it back in and the case back together without inadvertantly hitting either the power or up/down keys. Now press the down key. While holding it down, hold down the power key. If that doesn't put you into download mode, you have done the impossible. These phones are (almost) impossible to brick.
I have seemed to have done the something similar as I was trying to reflash with ODIN and the phone went black, I left it alone for several minutes and now when I try to turn the phone on I just have a graphic with a phone and a computer with a little triangle with an exclaimation mark in the middle and nothing else happens.
djallen1 said:
Take out the battery, wait a full minute. put it back in and the case back together without inadvertantly hitting either the power or up/down keys. Now press the down key. While holding it down, hold down the power key. If that doesn't put you into download mode, you have done the impossible. These phones are (almost) impossible to brick.
Click to expand...
Click to collapse
I really think i have the done impossible, there is no download mode nor recovery mode, (well, this has never worked) i don't know what to do, i'm getting my phone replaced.
I tried using adb on my computer, but the device is not found, my computer doesn't recognize my device.
cervantesjc said:
I really think i have the done impossible, there is no download mode nor recovery mode, (well, this has never worked) i don't know what to do, i'm getting my phone replaced.
I tried using adb on my computer, but the device is not found, my computer doesn't recognize my device.
Click to expand...
Click to collapse
UGH
I have the SAME problem...but I always had download AND recovery working...
after a few flashes in a short span...they just dissapeared...
screen just turns black after the "S" logo animation....
ADB can't see the device either
Same Here Too :-|
i've been searching and trying to get into dowload mode for a week and i't not working. i can hear it boot up but just stuck on the darn Vibrant screen
philthyman21 said:
i've been searching and trying to get into dowload mode for a week and i't not working. i can hear it boot up but just stuck on the darn Vibrant screen
Click to expand...
Click to collapse
I was there, use Odin to reflash to stock.
huh
djallen1 said:
Take out the battery, wait a full minute. put it back in and the case back together without inadvertantly hitting either the power or up/down keys. Now press the down key. While holding it down, hold down the power key. If that doesn't put you into download mode, you have done the impossible. These phones are (almost) impossible to brick.
Click to expand...
Click to collapse
i beg to differ
nothing is working for me either
So I went to This Site pathikshah. com /blog / install-android-2-2-froyo-galaxy-s/ (sorry about the spaces new user and xda wont let me post links, not spamming honest), I did exactly as it said it was working as planned until it reset after install. First instead of the vibrant screen coming up it now says:
Galaxy S
GT-I9000
Then It goes to:
Android System Recovery <3e>
on that screen it says twards the bottom:
update media please wait
E:Cant mount /dev/block/mmcblk0p1
(Invalid argument)
E:copy_dbdata_media:Cant mount SDCARD:
your storage not prepared yet, please use UI me
nu for format and reboot actions.
copy default media content failed.
so when I try to scroll through the recovery menu I have to push vol Up to scroll down
also it does nothing when i press the ok button (power button), unless I hold it down then it resets and goes back to the same recovery screen
I rooted the samsung galaxy s then added a rom and the rom is crashing my phone I've tried aboslutely everything don't know what else to do.
i also have a problem
i have install ROM manager and make a back up
went i try to recovery my backup it give me first the original recovery mode i know i have to select update.zip to access the clockworkmod recovery (ver 2.5.1.2 last one) i use the option restore and start it
now my phone just reboot in recovery mode
i'm looking if some one have a working ROM backup
tnx for your help
Drago.
cervantesjc said:
i have a real problem, trying to flash my samsung vibrant with odin, (installing the unofficial update) my phone was bricked, i cant get into download mode, the key combination vol-up + vol-down to get to download mode is not working, i can't get into recovery mode either, (well getting into recovery mode has never worked) i tried using adb reboot recovery with sdk and it comes as device not found.
Am i screwed or there is any way to unbrick?
Click to expand...
Click to collapse
Read instructions and download files from thread here:
http://forum.xda-developers.com/showthread.php?t=734475
Watch this video:
http://www.youtube.com/watch?v=AnY7P14JSWQ
Good luck
fstathes said:
Read instructions and download files from thread here:
http://forum.xda-developers.com/showthread.php?t=734475
Watch this video:
http://www.youtube.com/watch?v=AnY7P14JSWQ
Good luck
Click to expand...
Click to collapse
Thank you for the video link. I was up to that point unable to get the download/shoveling droid screen. Now I'm in the process of finally getting the phone back to stock after downloading the t-mobile update that cam through and bricked the phone.
no downloading mode
Hi i was hoping this will help me to reenabeling my bricked samsung. But i cant get it in to downloanding mode. the 3 button way isnt working and the way showed in the movie neither. Is there an other way to get the phone back to work?
I have tried all the methods posted here as well as many others from the link posted above. But to no avail.
I did everything successfully up until the reboot. Whereupon, it would not start. No amount of button combination helped me. And taking out the battery pack is no help either. It just won't start. I could use any advice.
Thank you.
I'm in the same boat now, attempted to odin back to stock and now I have a brick. It's just blank, I cant get it into download or recovery mode using any method described.
Is my only shot the jig method I've read about now?
EDIT
Nevermind, I got it. Pulled the battery, replaced it, held down both power buttons, inserted usb (already plugged in comp w/ odin open), boom..entered download mode and flashed..
cervantesjc said:
i have a real problem, trying to flash my samsung vibrant with odin, (installing the unofficial update) my phone was bricked, i cant get into download mode, the key combination vol-up + vol-down to get to download mode is not working, i can't get into recovery mode either, (well getting into recovery mode has never worked) i tried using adb reboot recovery with sdk and it comes as device not found.
Am i screwed or there is any way to unbrick?
Click to expand...
Click to collapse
Remove the battery and insert it again, now keep pressing the volume buttons and connect the USB cable to your phone, the usb cable must be connected to your pc first.
hey, i also experienced bricking my phone. is there a step by step process how to unbrick it? i need urgent help please. by the way im using samsung galaxy s 4g (
after i have gone to download mode. my computer cannot recognize my device. help me please.
to the post above me. Sounds like you have a bad usb data cable. Grab you a new cable online and you should be good to go
I'm assuming you have already downloaded the drivers to your computer. Sasmung.com will have them

[q] please help!!!!

I am a SUPER NOOB... I rooted my phone and S-Off it... Was trying to flash a ROM, did not work no my phone is stuck at all white screen with HTC across it.. Please help
if you pull the battery to turn off the phone, put the battery back in and hold the volume down button while you press the power button does it take you to the bootloader? And secondly, can you get to the recovery from there?
Yes... Now the son of a gun won't even power on...
I done did something bad... It wont even power up, or charge.... Before you ask me could I get to the boot loader screen I could, but I was jacking around with all kinda of stuff now the thing won't even power up..
How long are you holding the power button to turn it on, you just need to press the power button long enough to power the device on, but keep your finger on the vol down button until you get to the bootloader. Also, do you have the updated clockwork mod recovery installed that doesn't have the charging issue. Basically, is your battery dead?
ok now i have power...
Just please help me get my phone to come on so i can use it.. I am in boot loader now(held power button and volume down button)
go to recovery
Did it... What's next? I've tried everything on the list.. Nothing, that was before I actually posted the thread...
ok, if you are in the clockwork mod recovery, from there you need to do a full wipe, "data factory reset" cant remember the exact option. after you do a full wipe then you can try to install the rom again.
"data factory reset" did.... Phone still can't get pass that same screen....
did you re-install the rom after the factory reset? Also, the rom takes a while to boot the first time.
how can I re-install a Rom if my phone cant even get pass the screen and come on for me to get to the disk drive to drag and drop the ROM?
I am new to the andriod world, so please excuse the Noob-Ness
Ok..
When you downloaded the rom did you put it on your sd card?
What rom did you flash, and how did you flash it?
Lets start there.
**Edit**
And did you even read the following thread?
http://forum.xda-developers.com/showthread.php?t=1192300
I put it on my SD card.... I tried to flash it, didn't work... I flash well attempted to flash it from the Recovery Mode(Power and Volume down) click "install from Sd card" and click the ROM, then rebooted...
My suggestion would be to use your computer to download a new rom from the dev section. Find a usb adapter for the micro SD card and move the new rom to it. Try flashing the new rom from CWM. Sounds to me like you got a rom that isn't for the sensation. Do you remember which rom you downloaded?
InsertCoin..I think it was me.. I just might have **** something up.. I follow the direction from the guy on Thelockr dot com.. it wasnt that hard. I just F my phone up...
How long are you waiting when you turn on your phone after flashing the rom? As I said before it takes a while to boot the first time.
At least 3 mins per go.

[Q] Can't get into S/W!

Two weeks ago I had an ICS rom installed and was tired of the poor battery life, so I tried to unroot my phone and bring it back to stock to start over later. I got the stock 2.3.3 installed and decided not to unroot and just use the rom.
I followed this guide: http://forum.xda-developers.com/showthread.php?p=14159600#post14159600
But I didn't actually use SOC to unroot, because I wasn't sending my phone back to TMobile.
Today I was looking to see if there were any ICS roms that I might like to try out and found HFS. I downloaded it and tried to boot into CWM (Power + Vol down), and instead of going into CWM, it did the little android install splash screen, and just wiped my phone. So I installed RomManager and tried to install the rom through that. It rebooted, and did the same thing. So I "fake flashed" CWM through RomManager, and it booted into CWM finally. I thought I was in the clear, so I factory reset, wiped everything, and installed the HFS rom. It ran all the way trhough and installed successfully, until I rebooted. Now it's stuck on the white LG logo. I can't boot into CWM! It just goes to the android update splash and restarts.
To make things so much worse, I can't even boot into S/W update! I remove the battery and hold both volume buttons and plug in the USB. It does nothing. No lights, no driver installation prompt on my computer. Nothing...
What can I do at this point?
You need to re-install CWM, when you went back to stock it probably reverted your recovery to stock as well
Alright, I can get into s/w update by holding only the down arrow... But now I can't get NVFlash to acknowledge that my phone is plugged in. I've installed the LG drivers, ADB drivers and the LG Modem drivers. It doesn't ask for the APX drivers, although I've installed them in the past...
What do?
Just making sure, you are removing the battery, holding down the VOL up/down while you are plugging it in W/O the battery?
Yes I am. But it doesn't work if I push both, then plug it in. I only push the bottom and it boots into S/W
FYI, never, and I mean, NEVER use ROM Manager to flash CWM Recovery. That's like asking for a brick.
Sent from someone's Galaxy Nexus running AOKP + Franco
idbl_fanatic said:
Just making sure, you are removing the battery, holding down the VOL up/down while you are plugging it in W/O the battery?
Click to expand...
Click to collapse
DaBigums said:
Yes I am. But it doesn't work if I push both, then plug it in. I only push the bottom and it boots into S/W
Click to expand...
Click to collapse
Re-read his question. In order to get into apx mode you must remove the battery, keep it out, and, while holding the volume up AND down buttons, plug in the phone. If you already have the drivers installed itbwill not prompt for them. Just. Flash cwm with nvflash.
Sent from my LG-P999 using xda premium
Волк said:
Re-read his question. In order to get into apx mode you must remove the battery, keep it out, and, while holding the volume up AND down buttons, plug in the phone. If you already have the drivers installed itbwill not prompt for them. Just. Flash cwm with nvflash.
Sent from my LG-P999 using xda premium
Click to expand...
Click to collapse
My apologies for any misunderstanding as my answer was really short. But what I meant to say was, when I remove the battery and push both volume buttons down, then plug it in, I wait for 3 minutes and it still does nothing. But if I remove the battery, hold only the volume down button, it will boot into S/W. But when I use this method, it doesn't show up in the device manager as anything. I only get the sound of connecting a USB device, other than that, it's just not recognized by my PC. I've tried to run NVFlash anyway, and it says USB not connected. I'm at a complete loss...
Well I actually had a problem like this ( the not found usb part ) ehen I "bricked" my phone and what I did was I kept trying this for about 5 minutes and it worked. So my advice ie to check if you have the USB driver installed then keep trying to NVFlash.
If I helped you, push the thanks button for goodness sakes!

nexus s power button not working

im stuck in the loading animation of ICS right now and my phone wont start, since my power button is broken i cant boot into recovery to wipe cache... is there some way i can boot into recovery console without the power button? can i used odin to start into recovery console?
please help!
if your phone is off the only way to connect it to your pc is booting it(bootloader or normally).. so power button is the only way. I was using android sdk and the toolkit but I hope there is a program for this situation even if I don't think so
instead if you can start your phone in bootloader mode but when you boot it loops in the starting animation means there is something wrong with your rom/kernel and you have to flash something new (you can do it in fastboot mode using one of the two programs I've mentioned before)
However I've not understand the situation fully... if your power button is broken how can you be in the loading animation??? :/
serafo said:
if your phone is off the only way to connect it to your pc is booting it(bootloader or normally).. so power button is the only way. I was using android sdk and the toolkit but I hope there is a program for this situation even if I don't think so
instead if you can start your phone in bootloader mode but when you boot it loops in the starting animation means there is something wrong with your rom/kernel and you have to flash something new (you can do it in fastboot mode using one of the two programs I've mentioned before)
However I've not understand the situation fully... if your power button is broken how can you be in the loading animation??? :/
Click to expand...
Click to collapse
i can restart the phone by putting a USB or power cord into the phone, i cant turn it on with the power button.. because of that is why i cant get to recovery console, but i can get into the bootloader screen, but none of my buttons work there... also i got a jig USB, so i can get into download mode, but im missing the files to use ODIN to re-image the phone...
WolfShooterX said:
i can restart the phone by putting a USB or power cord into the phone, i cant turn it on with the power button.. because of that is why i cant get to recovery console, but i can get into the bootloader screen, but none of my buttons work there... also i got a jig USB, so i can get into download mode, but im missing the files to use ODIN to re-image the phone...
Click to expand...
Click to collapse
I'm not familiar with odin but if you can boot your phone in fastboot mode I think you can flash every file or make a wipe from your pc like with sdk for example.. you have just to search for the commands.. sorry if I can't be helpful
Did you explore the idea of repairing your power button ? Seems like a good solution
petenatas said:
Did you explore the idea of repairing your power button ? Seems like a good solution
Click to expand...
Click to collapse
lol, yeah... but want to boot it at least.... which i did with Odin :victory:
now, does anyone know where i can get the files to root a nexus s with odin?
WolfShooterX said:
lol, yeah... but want to boot it at least.... which i did with Odin :victory:
now, does anyone know where i can get the files to root a nexus s with odin?
Click to expand...
Click to collapse
I have never used Odin with Nexus S, never needed that. As you are able to boot, you may look at the following thread to get the script for rooting your phone.
http://forum.xda-developers.com/showthread.php?t=1544940
Remember, this process will unlock the boot loader if it is locked and unlocking boot loader will delete all files, even from the internal SD card. So you may consider having a complete backup on your computer.
I make a little trick to fix this case. I disassembled my phone for get motherboard with button in my hands. After it I "played" with power button: push, sway from side to side and kick it by finder nail. After all assembled phone and now the power button works fine.

Categories

Resources