Database Info

[Q] Build prop

Anyone know why Model and Device still show as Transformer TF101 and TF101 after I changing options in build.prop ?
PHP:
# begin build properties
# autogenerated by buildinfo.sh
ro.build.id=HTJ85B
ro.build.display.id=HTJ85B.prime_epad-1.7-20110804
ro.build.version.incremental=prime_epad-1.7-20110804
ro.build.version.sdk=13
ro.build.version.codename=REL
ro.build.version.release=3.2
ro.build.date=Wed Aug 03 00:00:00 GMT 2011
ro.build.date.utc=1312416000
ro.build.type=user
ro.build.user=roach
ro.build.host=nimda
ro.build.tags=release-keys
ro.product.model=GT-I9100
ro.product.brand=samsung
ro.product.name=GT-I9100
ro.product.device=GT-I9100
ro.product.board=GT-I9100
ro.product.cpu.abi=armeabi-v7a
# Samsung Specific Properties
ro.build.PDA=I9100XWKDD
ro.build.hidden_ver=I9100XWKDD
ro.build.changelist=161513
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=samsung
ro.product.locale.language=en
ro.product.locale.region=US
ro.wifi.channels=14
ro.board.platform=tegra
# ro.build.product is obsolete; use ro.product.device
ro.build.product=GT-I9100
# Do not try to parse ro.build.description or .fingerprint
ro.build.description=GT-I9100-user 3.2 GINGERBREAD XWKDD release-keys
ro.build.fingerprint=samsung/GT-I9100/GT-I9100:2.3.3/GINGERBREAD/XWKDD:user/release-keys
ro.build.characteristics=tablet
# Samsung Specific Properties
ro.build.PDA=I9100XWKDD
ro.build.hidden_ver=I9100XWKDD
# end build properties
ro.opengles.version = 131072
wifi.interface=wlan0
ro.ethernet.interface=eth0
ro.ethernet.autoEnable=yes
rild.libpath=/system/lib/libmbm-ril.so
rild.libargs=-d /dev/ttyACM0 -i wwan0
#
# ADDITIONAL_BUILD_PROPERTIES
#
ro.config.notification_sound=OnTheHunt.ogg
ro.config.alarm_alert=Alarm_Classic.ogg
dalvik.vm.heapstartsize=5m
dalvik.vm.heapgrowthlimit=48m
dalvik.vm.heapsize=256m
wifi.version.driver=V5.2.53
bt.version.driver=V6.19
gps.version.driver=V1.5.0
keyguard.no_require_sim=true
drm.service.enabled=1
ro.setupwizard.mode=OPTIONAL
ro.com.google.gmsversion=3.2_r1
gsm.bodysargsm=32,26,29,29
ro.com.google.clientidbase=android-samsung
ro.wifi.country=US
dalvik.vm.dexopt-flags=m=y
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt
And it shows as :

Take a look into the kernel, into init.rc or [devicename].init.rc, if they contain a line "setprop [property_name] TF101", it's your little bugger, edit it, and done!

fonix232 said:
Take a look into the kernel, into init.rc or [devicename].init.rc, if they contain a line "setprop [property_name] TF101", it's your little bugger, edit it, and done!
Click to expand...
Click to collapse
looked into all of the init files and none of them have setprop that sets to TF101

You may need to clear the cache using recovery. I remember working on the VS GTab and having to do that once or twice when making changes.
Trist

tristanwolf1134 said:
You may need to clear the cache using recovery. I remember working on the VS GTab and having to do that once or twice when making changes.
Trist
Click to expand...
Click to collapse
Did hard-reset,delete files in /cache from OS, and even replaced build.prop in incremental-update zip file and updated my firmware.

[HowTo] Show hidden Market Apps on Gingerbread Roms

I decided to create a new topic in dev, as this issue affected me in MS2Ginger, CM7 and MIUI, and users from any of these roms could benefit from the info.
If this should be on General, I'm sorry mods, here seemed more appropriate.
Guys, for those like me that couldn't see some apps on Market after using Gingerbread ROMs, I found a workaround after some research that worked for me.
* I just tested it on MIUI but it should work on others.
Basically the Market checks the build.prop for the fingerprint, so I used this one from Nexus S on 2.3.4 and had no issues so far.
Code:
ro.build.description=soju-user 2.3.4 GRJ22 121341 release-keys
ro.build.fingerprint=google/soju/crespo:2.3.4/GRJ22/121341:user/release-keys
*If someone can provide build.prop or fingerprint from Milestone 2 would be great. Didn't want to flash stock froyo just for that. Tried to find a build.prop from any Droid with gingerbread with no success, and I'm downloading now the leak from Droid 2 Global to test.
To use it :
adb pull /system/build.prop c:\where\you\want\to\put\it\
backup the file
open with notepad++ (I guess wordpad would work too) and replace with the fingerprint
save
adb remount ( or mount /system r/w using root explorer )
adb push c:\where\you\want\to\put\it\build.prop /system/
adb reboot

changes to references to defy(jordan) made my lights and torch stop to work. will wipe the build.prop from first post until find a fix
For those who already applied it, Sorry!
Below it's the original build.prop for MIUI 1.8.19 (will5) with the fingerprint changed but the original fingerprint commented for easy rollback in case of any new bugs noticed due to this change
Code:
# begin build properties
# autogenerated by buildinfo.sh
ro.build.id=MIUI
ro.build.display.id=MIUI.1.8.19
ro.build.version.incremental=1.8.19
ro.build.version.sdk=10
ro.build.version.codename=REL
ro.build.version.release=2.3.5
ro.build.date=Fri Aug 19 11:00:00 GMT 2011
ro.build.date.utc=1313727796
ro.build.type=userdebug
ro.build.user=builder
ro.build.host=winton-desktop
ro.build.tags=test-keys
ro.product.model=MB525
ro.product.brand=MOTO
ro.product.name=libra_jordan
ro.product.device=jordan
ro.product.board=jordan
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=motorola
ro.product.locale.language=en
ro.product.locale.region=GB
ro.wifi.channels=
ro.board.platform=omap3
# ro.build.product is obsolete; use ro.product.device
ro.build.product=jordan
# Do not try to parse ro.build.description or .fingerprint
#ro.build.description=libra_jordan-userdebug 2.3.5 MIUI 1.8.19 test-keys
#ro.build.fingerprint=MOTO/libra_jordan/jordan:2.3.5/MIUI/1.8.12:userdebug/test-keys
ro.build.description=soju-user 2.3.4 GRJ22 121341 release-keys
ro.build.fingerprint=google/soju/crespo:2.3.4/GRJ22/121341:user/release-keys
# end build properties
#
# system.prop for generic sdk
#
rild.libpath=/system/lib/librilswitch.so
rilswitch.vendorlibpath=/system/lib/libril-moto-umts-1.so
rilswitch.ganlibpath=/system/lib/libganril.so
rild.libargs=-d /dev/ttyS0
ro.sf.lcd_density=240
# Default network type.
# 3 -> GSM/WCDMA (auto mode, according to PRL)
ro.telephony.default_network=3
wifi.interface = tiwlan0
# Time between scans in seconds. Keep it high to minimize battery drain.
# This only affects the case in which there are remembered access points,
# but none are in range.
wifi.supplicant_scan_interval = 90
# The OpenGL ES API level that is natively supported by this device.
# This is a 16.16 fixed point number
ro.opengles.version = 131072
# This is a high density device with more memory, so larger vm heaps for it.
dalvik.vm.heapsize=48m
# Forbid format of these partitions in mount menu :
ro.cwm.forbid_format=/misc,/radio,/boot,/recovery,/pds,/system
# BatteryLight while charging, enabled by default.
ro.battery_light=false
# declare we're using Usb.apk
ro.usb.use_custom_service=1
# disable Windows Media Sync Usb.apk mode
ro.mtp_available=0
# use 1% battery steps
ro.product.use_charge_counter=1
# use default multitouch configuration
persist.input.multitouch_points=4
#
# ADDITIONAL_BUILD_PROPERTIES
#
ro.media.capture.maxres=5m
ro.media.capture.flash=led
ro.media.capture.flashIntensity=41
ro.media.capture.torchIntensity=25
ro.media.capture.classification=classH
#ro.media.capture.flip=horizontalandvertical
persist.sys.purgeable_assets=0
ro.com.android.wifi-watchlist=GoogleGuest
ro.error.receiver.system.apps=com.google.android.feedback
ro.setupwizard.enterprise_mode=1
ro.com.google.clientidbase=android-verizon
ro.com.google.locationfeatures=1
ro.url.legal=http://www.google.com/intl/%s/mobile/android/basic/phone-legal.html
ro.url.legal.android_privacy=http://www.google.com/intl/%s/mobile/android/basic/privacy.html
ro.config.vc_call_vol_steps=7
ro.telephony.call_ring.multiple=false
windowsmgr.max_events_per_sec=130
ro.telephony.call_ring.delay=1000
ro.url.safetylegal=http://www.motorola.com/staticfiles/Support/legal/?model=A855
ro.setupwizard.enable_bypass=1
ro.default_usb_mode=4
ro.media.dec.jpeg.memcap=20000000
ro.media.dec.aud.wma.enabled=1
ro.media.dec.vid.wmv.enabled=1
ro.product.multi_touch_enabled=true
ro.com.motorola.smartsensor=true
dalvik.vm.lockprof.threshold=500
ro.kernel.android.checkjni=0
dalvik.vm.dexopt-data-only=1
dalvik.vm.dexopt-flags=m=y
keyguard.no_require_sim=true
ro.com.android.dateformat=MM-dd-yyyy
ro.com.android.dataroaming=false
ro.url.legal=http://www.google.com/intl/%s/mobile/android/basic/phone-legal.html
ro.url.legal.android_privacy=http://www.google.com/intl/%s/mobile/android/basic/privacy.html
ro.com.google.clientidbase=android-google
ro.com.android.wifi-watchlist=GoogleGuest
ro.setupwizard.enterprise_mode=1
ro.setupwizard.mode=DISABLED
ro.com.android.dateformat=yyyy-MM-dd
ro.com.android.dataroaming=true
ro.ril.enable.managed.roaming=1
ro.ril.oem.nosim.ecclist=911,112,999,000,08,118,120,122,110,119,995
ro.ril.emc.mode=2
ro.moddevice=Defy
dalvik.vm.lockprof.threshold=500
dalvik.vm.dexopt-flags=m=y
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt
ro.HOME_APP_ADJ=1
debug.sf.hw=1
debug.composition.type=hw
pm.sleep_mode=1
ro.ril.disable.power.collapse=0
persist.adb.notify=0
debug.performance.tuning=1
video.accelerate.hw=1
ro.kernel.android.checkjni=0
dalvik.vm.startheapsize=8m
mot.proximity.delay=150
ro.config.ringtone=Pegasus.ogg
ro.config.notification_sound=Procyon.ogg
ro.config.alarm_alert=Alarm_Classic.ogg
persist.sys.timezone=Europe/Berlin

[ROM] SGH-T679 // VKJ1 // Stock // Deodexed // Rooted //Busybox

This is the rom that ships on the Samsung Exhibit II 4G with a few added extras.
The most essential tools have been added to this stock rom including root (su and superuser) as well as busybox.
The whole rom itself has also been deodexed.
Why would I want a deodexed rom?
A deodexed rom allows for developers to theme the rom and tweak certain apps as they wish. It also make removing bloat alot easier.
Benefits of a stock rom?
Other than providing you with a rooted stock experience that is also deodexed, this rom will allow you to recover your phone in the situation that you have a custom recovery but your phone isn't booting to the lockscreen.
How to Flash
Booting into ClockworkMod Recovery. (Install ClockworkMod)
To boot into ClockworkMod Recovery (where we will be flashing the downloaded rom we put on our SD card) we have to power down the phone.
Then you simply need to hold the power button and the volume up button after 5 seconds release the power button and continue to hold the volume up till the ClockworkMod Recovery menu come up.
Wiping data/factory reset.
Once we are in recovery we will notice and option in the main menu to Wipe
Data/Factory Reset
Flashing the rom!
Now that we have followed all of the above steps and made sure to wipe data/factory reset, we are ready to flash the rom!
Choose "Install Zip from SD Card" from the main menu, and browse for the rom you put on your SD card.
Select yes and the process will begin.
Reboot.
When recovery reports to you that the flash is done and completed you can select reboot from the main menu, and your phone will reboot into the rom.
Also you can make a backup (nandroid) with ClockworkMod and is highly recommended prior to flashing anything!
Just for Developers!
Template for custom roms.
A rooted stock rom is useful as a base for many custom roms that developers create.
An updater-script that is guaranteed to work.
Just below is an updater-script that is guaranteed to work, it can be edited and tweaked to your liking but it currently does boot the rom and is used in this rom I've posted.
Enjoy!
Code:
# begin build properties
# autogenerated by buildinfo.sh
ro.build.id=GINGERBREAD
ro.build.display.id=GINGERBREAD.VKJ1
ro.build.version.incremental=VKJ1
ro.build.version.sdk=10
ro.build.version.codename=REL
ro.build.version.release=2.3.5
ro.build.date=Sat Oct 1 07:48:06 KST 2011
ro.build.date.utc=1317422886
ro.build.type=user
ro.build.user=se.infra
ro.build.host=SEP-68
ro.build.tags=release-keys
ro.product.model=SGH-T679
ro.product.brand=samsung
ro.product.name=SGH-T679
ro.product.device=SGH-T679
ro.product.board=SGH-T679
ro.product.cpu.abi=armeabi-v7a
# Samsung Specific Properties
ro.build.PDA=T679UVKJ1
ro.build.hidden_ver=T679UVKJ1
ro.build.changelist=625406
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=samsung
ro.product.locale.language=en
ro.product.locale.region=US
ro.wifi.channels=
ro.board.platform=msm7k
# ro.build.product is obsolete; use ro.product.device
ro.build.product=SGH-T679
# Do not try to parse ro.build.description or .fingerprint
ro.build.description=SGH-T679-user 2.3.5 GINGERBREAD VKJ1 release-keys
ro.build.fingerprint=samsung/SGH-T679/SGH-T679:2.3.5/GINGERBREAD/VKJ1:user/release-keys
# Samsung Specific Properties
ro.build.PDA=T679UVKJ1
ro.build.hidden_ver=T679UVKJ1
ro.build.changelist=625406
ro.tether.denied=false
ro.flash.resolution=1080
# end build properties
#
# system.prop for surf
#
##rild.libpath=/system/lib/libsec-ril.so
## start GAN-Lite ##
rild.libpath=/system/lib/librilswitch.so
rilswitch.vendorlibpath=/system/lib/libsec-ril.so
rilswitch.ganlibpath=/system/lib/libganril.so
## end GAN-Lite ##
rild.libargs=-d /dev/smd0
persist.rild.nitz_plmn=
persist.rild.nitz_long_ons_0=
persist.rild.nitz_long_ons_1=
persist.rild.nitz_long_ons_2=
persist.rild.nitz_long_ons_3=
persist.rild.nitz_short_ons_0=
persist.rild.nitz_short_ons_1=
persist.rild.nitz_short_ons_2=
persist.rild.nitz_short_ons_3=
DEVICE_PROVISIONED=1
debug.sf.hw=1
dalvik.vm.heapsize=64m
ro.sf.lcd_density=240
ro.dev.dmm=1
dev.dmm.dpd.trigger_delay=30
#
# system props for the cne module
#
persist.cne.UseCne=vendor
persist.cne.bat.range.low.med=30
persist.cne.bat.range.med.high=60
persist.cne.loc.policy.op=/system/etc/OperatorPolicy.xml
persist.cne.loc.policy.user=/system/etc/UserPolicy.xml
persist.cne.bwbased.rat.sel=false
persist.cne.snsr.based.rat.mgt=false
persist.cne.bat.based.rat.mgt=false
persist.cne.rat.acq.time.out=30000
persist.cne.rat.acq.retry.tout=0
#
lpa.decode=false
ro.hdmi.enable=true
#
# system props for the data modules
#
ro.use_data_netmgrd=true
#
# system props for SD card emulation of emmc partition
#
ro.emmc.sdcard.partition=16
#
# system props for telephony modules
#
#device supports EHRPD
ro.config.ehrpd=true
#
# system props for the MM modules
#
media.stagefright.enable-player=true
media.stagefright.enable-meta=false
media.stagefright.enable-scan=false
media.stagefright.enable-http=true
# Samsung USB default mode
persist.service.usb.setting=0
# Qualcomm H/W crypto module load
crypto.driver.load=1
# Set Default Timezone as America/New_York
persist.sys.timezone=America/New_York
#
# ADDITIONAL_BUILD_PROPERTIES
#
ro.url.legal=http://www.google.com/intl/%s/mobile/android/basic/phone-legal.html
ro.url.legal.android_privacy=http://www.google.com/intl/%s/mobile/android/basic/privacy.html
ro.com.google.locationfeatures=1
ro.com.google.clientidbase=android-samsung
ro.setupwizard.mode=OPTIONAL
ro.com.google.gmsversion=2.3_r7
keyguard.no_require_sim=true
ro.com.android.dateformat=MM-dd-yyyy
ro.com.android.dataroaming=false
ro.ril.hsxpa=1
ro.ril.gprsclass=10
media.stagefright.enable-player=false
media.stagefright.enable-meta=false
media.stagefright.enable-scan=false
media.stagefright.enable-http=true
media.stagefright.enable-rtsp=false
dev.sfbootcomplete=0
wifi.interface=eth0
wifi.supplicant_scan_interval=15
ro.com.google.clientidbase=android-samsung
ro.com.google.clientidbase.ms=android-hms-tmobile-us
ro.com.google.clientidbase.am=android-tmobile-us
ro.com.google.clientidbase.gmm=android-samsung
ro.com.google.clientidbase.yt=android-samsung
ro.url.legal=http://www.google.com/intl/%s/mobile/android/basic/phone-legal.html
ro.url.legal.android_privacy=http://www.google.com/intl/%s/mobile/android/basic/privacy.html
ro.com.google.locationfeatures=1
ro.config.ringtone=CLEAN_Tmo_Jingle.ogg
ro.config.notification_sound=S_Cloud.ogg
ro.config.alarm_alert=Good_Morning.ogg
ro.setupwizard.mode=DISABLED
ro.opengles.version=131072
ro.com.google.gmsversion=2.3_r1
ro.secdevenc=true
ro.wtldatapassword=true
dalvik.vm.dexopt-flags=m=y
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt
Download: SGH-T679_Stock_Deoxed

Congrats & good luck

Thanks
Yea now to remember what I did with other build so I can post it LOL
Sent from my SGH-T989 using Tapatalk

Nice! Is this pretty much the same as Peach Sunrise though?

dennis96411 said:
Nice! Is this pretty much the same as Peach Sunrise though?
Click to expand...
Click to collapse
No peach has been debloated and some minor tweaks. You can flash this and return your phone. Totally stock.
Sent from my SGH-T989 using Tapatalk

Very smooth install, no problems whatsoever. Camera/recorder, calling, sms,etc working fine. Excellent job!

dennis96411 said:
Nice! Is this pretty much the same as Peach Sunrise though?
Click to expand...
Click to collapse
I'll be releasing my custom Rom today sometime. Also be adding my themes on page 2 that work for Peach Sunrise and my Rom for now till Jocala starts his framework edits.
Sent from my SGH-T989 using Tapatalk

jocala said:
Very smooth install, no problems whatsoever. Camera/recorder, calling, sms,etc working fine. Excellent job!
Click to expand...
Click to collapse
Thanks sir
Sent from my SGH-T989 using Tapatalk

[9001][Recovery] Fixed FeaMod V1.4 [FINAL PROPER] [No BootLoops] [NonOC] [NonUV]

This is a fixed version of manveru0's FeaMod recovery V1.4 (aka CWM recovery v 5.5.0.4) so all credits go to him.
Disclaimer: this piece of software is not for the unexperienced and might bring you in a situation you can't resolve yourself. So don't use it if you fear the potential danger of bricking your device. I am responsible for nothing related to this piece of software and therefore won't help. If you decide to use it anyway you agree to be ultimately responsible for all consequences that may occur. So you have been warned !
Terms of use: Remember the power of reading ! If you can't find some particular information on the first page use the search function, it is your best friend.
Besides there are even guides and tutorials all over the forum and in most cases your question was already answered.
If you take a moment and read through the WHOLE post below and a few more moments to read some of all the stuff in other device related threads of this forum, you will find ALL you need just there.
It's not invisible so you CAN find it. And forum rules and good manners tell you to do it exactly like this. And I WILL ignore every question that is already answered here.
Obey the rules !
Recovery feature list
- the internally used kernel to boot CWM recovery is not overclocked and not undervolted and uses Samsung's stock kernel settings so it should work on any i9001 phone (it's different from manveru0's release and I already released this fix in January in the original FeaMod thread)
- reworked the integrated script in recovery startup sequence that takes care about the recovery reboot issue automatically so no more rebooting into recovery again and again once and for all (reported to work finally by wintel_mac, thanks for testing all releases)
- the CWM 5.5.0.4 recovery itself remains totally untouched and is the very same as in FeaMod V1.4; for any more information on that please refer to the original FeaMod thread here:
http://forum.xda-developers.com/showthread.php?t=1331164
- the package includes only the recovery image so anything else on your phone remains untouched including your boot kernel; the recovery partition has its own kernel integrated which is only used for booting CWM recovery, in all other cases your original kernel in the boot partition is used - primarily for booting android that is
​
This version is meant for use with ANY i9001 ROM including stock ROMs, custom ROMs and even AOSP ROMs as well (as soon as the latter are actually available)
Install instructions:
1. If you don't have already any CWM version (FeaMod Recovery) install V1.2 via Odin first. If you never heard of that learn all about it here:
http://forum.xda-developers.com/showthread.php?t=1331164
2. Now make a complete nandroid backup of your phone with CWM
3. Download the attached CWM zip package
4. Copy it to your internal sdcard
5. In CWM choose "install zip from sdcard", then "choose zip from internal sdcard"
6. Select the downloaded file "FeaModV1.4_Fixed_NoBootLoop_NonOC_NonUV.zip"
7. Confirm install with "Yes"
8. Wait till you see the message "Reboot to use Fixed FeaMod V1.4 !"
9. Do so like the message says.
10. On first reboot the fix to cure the recovery reboot wasn't yet executed so you will end up in recovery once again (if your phone is affected with that issue) !
11. So you have to reboot into system once again and from now on everything will be fine, promised That is if you installed it properly and exactly like described above.
​
If anything went wrong during install just try again.
If you can't boot into recovery anymore just install FeaMod 1.2 via Odin again.
If you want to install Fixed FeaMod V1.4 directly via odin just extract the recovery.img only from the zip file and tar it. Then flash it via Odin in one package mode. If you don't know how to do that refer to the flash guides in this i9001 subforum or use the above described method only. If you still can't handle anything of that don't use FeaMod/CWM at all, you will most probably brick your phone with it.
The experienced users (ONLY !!!) can also use dd of course to flash the recovery.img directly to the appropriate partition
If you got severe errors AND didn't make a backup because you knew better than the developer don't even dare to beg for help.
If you encounter any other errors report them here but be sure that this is no feature or problem that was already described above.

reserved...

reserved ...

Sorry, but I'm the show stopper... the phone still boots into recovery.
Still need to wipe mmcblk0p14 to get out of this loop

Thanks ! Works perfect for me
I dded the img

wintel_mac said:
Sorry, but I'm the show stopper... the phone still boots into recovery.
Still need to wipe mmcblk0p14 to get out of this loop
Click to expand...
Click to collapse
Ooops, this means the script isn't actually executed. Couldn't test it properly since my phone isn't affected by the issue. Will review that immediately.

Looks like im the wrong person to test this out
It always worked fine for me

nail16 said:
Thanks ! Works perfect for me
I dded the img
Click to expand...
Click to collapse
Which would mean the script works but the CWM install routine doesn't.
@wintelmac: can you please attach the default.prop file that shows up when you boot into recovery ?
Code:
adb shell "cat /default.prop" > default.prop

nail16 said:
Looks like im the wrong person to test this out
It always worked fine for me
Click to expand...
Click to collapse
Funny, couldn't you say that earlier ?

couldn't you refresh your page earlier ?
Should i post my last_log of the recovery ?

nail16 said:
couldn't you refresh your page earlier ?
Click to expand...
Click to collapse
no, because I was already in posting mode
nail16 said:
Should i post my last_log of the recovery ?
Click to expand...
Click to collapse
Won't help since you are not affected by the issue anyway. New version already uploaded, wintel_mac can test it now.

It's kinda funny your's and my phone are not effected by the recovery bug,
but you'r kernel still managed to screw up my sdcard

nail16 said:
It's kinda funny your's and my phone are not effected by the recovery bug,
but you'r kernel still managed to screw up my sdcard
Click to expand...
Click to collapse
Which only proves what I said: no two phones are exactly the same

Yep, here it is
Code:
C:\Users\User>adb shell
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
~ # cat /default.prop
cat /default.prop
#
# ADDITIONAL_DEFAULT_PROPERTIES
#
ro.secure=0
ro.allow.mock.location=1
ro.debuggable=1
ro.secure=0
ro.allow.mock.location=1
ro.debuggable=1
ro.secure=0
ro.allow.mock.location=1
ro.debuggable=1
persist.service.adb.enable=1
# begin build properties
# autogenerated by buildinfo.sh
ro.build.id=GINGERBREAD
ro.build.display.id=full_galaxysplus-eng 2.3.7 GINGERBREAD eng.root.20120216.035
237 test-keys
ro.build.version.incremental=eng.root.20120216.035237
ro.build.version.sdk=10
ro.build.version.codename=REL
ro.build.version.release=2.3.7
ro.build.date=Thu Feb 16 04:20:00 CET 2012
ro.build.date.utc=1329362400
ro.build.type=eng
ro.build.user=root
ro.build.host=ANKObian
ro.build.tags=test-keys
ro.product.model=GT-I9001
ro.product.brand=Samsung
ro.product.name=full_galaxysplus
ro.product.device=galaxysplus
ro.product.board=qcom
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=Samsung
ro.product.locale.language=hdpi
ro.product.locale.region=
ro.wifi.channels=
ro.board.platform=msm7x30
# ro.build.product is obsolete; use ro.product.device
ro.build.product=galaxysplus
# Do not try to parse ro.build.description or .fingerprint
ro.build.description=full_galaxysplus-eng 2.3.7 GINGERBREAD eng.root.20120216.03
5237 test-keys
ro.build.fingerprint=Samsung/full_galaxysplus/galaxysplus:2.3.7/GINGERBREAD/eng.
root.20120216.035237:eng/test-keys
ro.cm.device=galaxysplus
# end build properties
#
# system.prop for galaxysplus
#
# from init.rc
#service.brcm.bt.srv_active=0
#service.brcm.bt.hcid_active=0
#service.brcm.fm.activation=0
#ro.rfkilldisabled=0
# from build.prop
#
# system.prop for surf
#
debug.sf.hw=1
dalvik.vm.heapsize=64m
ro.sf.lcd_density=240
#ro.dev.dmm=1
#dev.dmm.dpd.trigger_delay=30
#
# system props for the cne module
#
#persist.cne.UseCne=vendor
#persist.cne.bat.range.low.med=30
#persist.cne.bat.range.med.high=60
#persist.cne.loc.policy.op=/system/etc/OperatorPolicy.xml
#persist.cne.loc.policy.user=/system/etc/UserPolicy.xml
#persist.cne.bwbased.rat.sel=false
#persist.cne.snsr.based.rat.mgt=false
#persist.cne.bat.based.rat.mgt=false
#persist.cne.rat.acq.time.out=30000
#persist.cne.rat.acq.retry.tout=0
#
#lpa.decode=false
#ro.hdmi.enable=true
#
# system props for the data modules
#
#ro.use_data_netmgrd=true
#
# system props for SD card emulation of emmc partition
#
ro.emmc.sdcard.partition=16
#
# system props for the MM modules
#
#media.stagefright.enable-player=true
#media.stagefright.enable-meta=false
#media.stagefright.enable-scan=false
#media.stagefright.enable-http=true
#media.stagefright.enable-rtsp=false
# Samsung USB default mode
#persist.service.usb.setting=0
#
# ADDITIONAL_BUILD_PROPERTIES
#
wifi.supplicant_scan_interval=15
#ro.secdevenc=true
dalvik.vm.dexopt-flags=m=y
#
# ADDITIONAL_BUILD_PROPERTIES
#
rild.libpath=/system/lib/libsec-ril.so
rild.libargs=-d/dev/ttyS0
wifi.interface=eth0
ro.opengles.version=131072
ro.config.ehrpd=true
ro.telephony.ril_class=samsung
ro.product.locale.language=en
ro.product.locale.region=GB
mobiledata.interfaces=pdp0,gprs,ppp0
ro.com.google.locationfeatures=1
ro.com.google.networklocation=1
keyguard.no_require_sim=true
ro.ril.hsxpa=1
ro.ril.gprsclass=10
ro.config.notification_sound=OnTheHunt.ogg
ro.config.alarm_alert=Alarm_Classic.ogg
ro.kernel.android.checkjni=1
ro.setupwizard.mode=OPTIONAL
dalvik.vm.dexopt-flags=m=y
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt
~ #

I'm still using you'r kernel with a dead sdcard inside my phone

nail16 said:
I'm still using you'r kernel with a dead sdcard inside my phone
Click to expand...
Click to collapse
Please, don't crosspost^^ It's about the recovery (which uses not even the skyhigh kernel), and not the kernel so it's simply uuuuuuseless here

wintel_mac said:
Yep, here it is
Click to expand...
Click to collapse
OK, that's the right one, so the install routine works. Which is actually the only part that I could test on my own phone and it worked properly
A new version is already online, can you test that please ?

nail16 said:
I'm still using you'r kernel with a dead sdcard inside my phone
Click to expand...
Click to collapse
Did you read this already ?
http://forum.xda-developers.com/showpost.php?p=24307493&postcount=213

Code:
V:\Downloads>adb push sky-new-recovery.img /emmc/flash-backup/
2174 KB/s (5083136 bytes in 2.283s)
V:\Downloads>adb shell
~ # mount /emmc
mount /emmc
~ # dd if=/emmc/flash-backup/sky-new-recovery.img of=/dev/block/mmcblk0p13
dd if=/emmc/flash-backup/sky-new-recovery.img of=/dev/block/mmcblk0p13
9928+0 records in
9928+0 records out
5083136 bytes (4.8MB) copied, 2.363983 seconds, 2.0MB/s
~ #
Rebootet... went back into CWM. Rebooted once more... CWM. And just another reboot (you may guess...) CWM.
Code:
~ # cat /default.prop
cat /default.prop
#
# ADDITIONAL_DEFAULT_PROPERTIES
#
ro.secure=0
ro.allow.mock.location=1
ro.debuggable=1
ro.secure=0
ro.allow.mock.location=1
ro.debuggable=1
ro.secure=0
ro.allow.mock.location=1
ro.debuggable=1
persist.service.adb.enable=1
# begin build properties
# autogenerated by buildinfo.sh
ro.build.id=GINGERBREAD
ro.build.display.id=full_galaxysplus-eng 2.3.7 GINGERBREAD eng.root.20120216.035
237 test-keys
ro.build.version.incremental=eng.root.20120216.035237
ro.build.version.sdk=10
ro.build.version.codename=REL
ro.build.version.release=2.3.7
ro.build.date=Thu Feb 16 04:20:00 CET 2012
ro.build.date.utc=1329362400
ro.build.type=eng
ro.build.user=root
ro.build.host=ANKObian
ro.build.tags=test-keys
ro.product.model=GT-I9001
ro.product.brand=Samsung
ro.product.name=full_galaxysplus
ro.product.device=galaxysplus
ro.product.board=qcom
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=Samsung
ro.product.locale.language=hdpi
ro.product.locale.region=
ro.wifi.channels=
ro.board.platform=msm7x30
# ro.build.product is obsolete; use ro.product.device
ro.build.product=galaxysplus
# Do not try to parse ro.build.description or .fingerprint
ro.build.description=full_galaxysplus-eng 2.3.7 GINGERBREAD eng.root.20120216.03
5237 test-keys
ro.build.fingerprint=Samsung/full_galaxysplus/galaxysplus:2.3.7/GINGERBREAD/eng.
root.20120216.035237:eng/test-keys
ro.cm.device=galaxysplus
# end build properties
#
# system.prop for galaxysplus
#
# from init.rc
#service.brcm.bt.srv_active=0
#service.brcm.bt.hcid_active=0
#service.brcm.fm.activation=0
#ro.rfkilldisabled=0
# from build.prop
#
# system.prop for surf
#
debug.sf.hw=1
dalvik.vm.heapsize=64m
ro.sf.lcd_density=240
#ro.dev.dmm=1
#dev.dmm.dpd.trigger_delay=30
#
# system props for the cne module
#
#persist.cne.UseCne=vendor
#persist.cne.bat.range.low.med=30
#persist.cne.bat.range.med.high=60
#persist.cne.loc.policy.op=/system/etc/OperatorPolicy.xml
#persist.cne.loc.policy.user=/system/etc/UserPolicy.xml
#persist.cne.bwbased.rat.sel=false
#persist.cne.snsr.based.rat.mgt=false
#persist.cne.bat.based.rat.mgt=false
#persist.cne.rat.acq.time.out=30000
#persist.cne.rat.acq.retry.tout=0
#
#lpa.decode=false
#ro.hdmi.enable=true
#
# system props for the data modules
#
#ro.use_data_netmgrd=true
#
# system props for SD card emulation of emmc partition
#
ro.emmc.sdcard.partition=16
#
# system props for the MM modules
#
#media.stagefright.enable-player=true
#media.stagefright.enable-meta=false
#media.stagefright.enable-scan=false
#media.stagefright.enable-http=true
#media.stagefright.enable-rtsp=false
# Samsung USB default mode
#persist.service.usb.setting=0
#
# ADDITIONAL_BUILD_PROPERTIES
#
wifi.supplicant_scan_interval=15
#ro.secdevenc=true
dalvik.vm.dexopt-flags=m=y
#
# ADDITIONAL_BUILD_PROPERTIES
#
rild.libpath=/system/lib/libsec-ril.so
rild.libargs=-d/dev/ttyS0
wifi.interface=eth0
ro.opengles.version=131072
ro.config.ehrpd=true
ro.telephony.ril_class=samsung
ro.product.locale.language=en
ro.product.locale.region=GB
mobiledata.interfaces=pdp0,gprs,ppp0
ro.com.google.locationfeatures=1
ro.com.google.networklocation=1
keyguard.no_require_sim=true
ro.ril.hsxpa=1
ro.ril.gprsclass=10
ro.config.notification_sound=OnTheHunt.ogg
ro.config.alarm_alert=Alarm_Classic.ogg
ro.kernel.android.checkjni=1
ro.setupwizard.mode=OPTIONAL
dalvik.vm.dexopt-flags=m=y
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt
~ #

wintel_mac said:
Code:
V:\Downloads>adb push sky-new-recovery.img /emmc/flash-backup/
2174 KB/s (5083136 bytes in 2.283s)
V:\Downloads>adb shell
~ # mount /emmc
mount /emmc
~ # dd if=/emmc/flash-backup/sky-new-recovery.img of=/dev/block/mmcblk0p13
dd if=/emmc/flash-backup/sky-new-recovery.img of=/dev/block/mmcblk0p13
9928+0 records in
9928+0 records out
5083136 bytes (4.8MB) copied, 2.363983 seconds, 2.0MB/s
~ #
Rebootet... went back into CWM. Rebooted once more... CWM. And just another reboot (you may guess...) CWM.
Code:
~ # cat /default.prop
cat /default.prop
#
# ADDITIONAL_DEFAULT_PROPERTIES
#
ro.secure=0
ro.allow.mock.location=1
ro.debuggable=1
ro.secure=0
ro.allow.mock.location=1
ro.debuggable=1
ro.secure=0
ro.allow.mock.location=1
ro.debuggable=1
persist.service.adb.enable=1
# begin build properties
# autogenerated by buildinfo.sh
ro.build.id=GINGERBREAD
ro.build.display.id=full_galaxysplus-eng 2.3.7 GINGERBREAD eng.root.20120216.035
237 test-keys
ro.build.version.incremental=eng.root.20120216.035237
ro.build.version.sdk=10
ro.build.version.codename=REL
ro.build.version.release=2.3.7
ro.build.date=Thu Feb 16 04:20:00 CET 2012
ro.build.date.utc=1329362400
ro.build.type=eng
ro.build.user=root
ro.build.host=ANKObian
ro.build.tags=test-keys
ro.product.model=GT-I9001
ro.product.brand=Samsung
ro.product.name=full_galaxysplus
ro.product.device=galaxysplus
ro.product.board=qcom
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=Samsung
ro.product.locale.language=hdpi
ro.product.locale.region=
ro.wifi.channels=
ro.board.platform=msm7x30
# ro.build.product is obsolete; use ro.product.device
ro.build.product=galaxysplus
# Do not try to parse ro.build.description or .fingerprint
ro.build.description=full_galaxysplus-eng 2.3.7 GINGERBREAD eng.root.20120216.03
5237 test-keys
ro.build.fingerprint=Samsung/full_galaxysplus/galaxysplus:2.3.7/GINGERBREAD/eng.
root.20120216.035237:eng/test-keys
ro.cm.device=galaxysplus
# end build properties
#
# system.prop for galaxysplus
#
# from init.rc
#service.brcm.bt.srv_active=0
#service.brcm.bt.hcid_active=0
#service.brcm.fm.activation=0
#ro.rfkilldisabled=0
# from build.prop
#
# system.prop for surf
#
debug.sf.hw=1
dalvik.vm.heapsize=64m
ro.sf.lcd_density=240
#ro.dev.dmm=1
#dev.dmm.dpd.trigger_delay=30
#
# system props for the cne module
#
#persist.cne.UseCne=vendor
#persist.cne.bat.range.low.med=30
#persist.cne.bat.range.med.high=60
#persist.cne.loc.policy.op=/system/etc/OperatorPolicy.xml
#persist.cne.loc.policy.user=/system/etc/UserPolicy.xml
#persist.cne.bwbased.rat.sel=false
#persist.cne.snsr.based.rat.mgt=false
#persist.cne.bat.based.rat.mgt=false
#persist.cne.rat.acq.time.out=30000
#persist.cne.rat.acq.retry.tout=0
#
#lpa.decode=false
#ro.hdmi.enable=true
#
# system props for the data modules
#
#ro.use_data_netmgrd=true
#
# system props for SD card emulation of emmc partition
#
ro.emmc.sdcard.partition=16
#
# system props for the MM modules
#
#media.stagefright.enable-player=true
#media.stagefright.enable-meta=false
#media.stagefright.enable-scan=false
#media.stagefright.enable-http=true
#media.stagefright.enable-rtsp=false
# Samsung USB default mode
#persist.service.usb.setting=0
#
# ADDITIONAL_BUILD_PROPERTIES
#
wifi.supplicant_scan_interval=15
#ro.secdevenc=true
dalvik.vm.dexopt-flags=m=y
#
# ADDITIONAL_BUILD_PROPERTIES
#
rild.libpath=/system/lib/libsec-ril.so
rild.libargs=-d/dev/ttyS0
wifi.interface=eth0
ro.opengles.version=131072
ro.config.ehrpd=true
ro.telephony.ril_class=samsung
ro.product.locale.language=en
ro.product.locale.region=GB
mobiledata.interfaces=pdp0,gprs,ppp0
ro.com.google.locationfeatures=1
ro.com.google.networklocation=1
keyguard.no_require_sim=true
ro.ril.hsxpa=1
ro.ril.gprsclass=10
ro.config.notification_sound=OnTheHunt.ogg
ro.config.alarm_alert=Alarm_Classic.ogg
ro.kernel.android.checkjni=1
ro.setupwizard.mode=OPTIONAL
dalvik.vm.dexopt-flags=m=y
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt
~ #
Click to expand...
Click to collapse
Hm, this puzzles me a little bit and will become quite a challenge more than I thought. But I'm still confident that I will work it out soon

wifi getting ip address issue with adb enable in build.prop

Hello. I have STB Vermax HD-100 with android 4.2.2 and allwinner A20 processor. I try to create custom image for device with enabled adb debugging by default. I found that post: https://forum.xda-developers.com/showthread.php?t=2335799 So, I have to insert the follow lines:
Code:
persist.service.adb.enable=1
persist.service.debuggable=1
persist.sys.usb.config=mtp,adb
My stock build.prop is already has "persist.sys.usb.config=mass_storage"
# begin build properties
# autogenerated by buildinfo.sh
ro.build.id=JDQ39
ro.build.display.id=JDQ39
ro.build.version.incremental=20150319
ro.build.version.sdk=17
ro.build.version.codename=REL
ro.build.version.release=4.2.2
ro.build.date=Пт. марта 20 03:02:34 MSK 2015
ro.build.date.utc=1426809754
ro.build.type=user
ro.build.user=andrey
ro.build.host=cyberdev2
ro.build.tags=test-keys
ro.product.model=Vermax HD100
ro.product.brand=softwinners
ro.product.name=sugar_ref001
ro.product.device=sugar-ref001
ro.product.board=wing
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=unknown
ro.product.locale.language=ru
ro.product.locale.region=RU
ro.wifi.channels=
ro.board.platform=exDroid
# ro.build.product is obsolete; use ro.product.device
ro.build.product=sugar-ref001
# Do not try to parse ro.build.description or .fingerprint
ro.build.description=sugar_ref001-user 4.2.2 JDQ39 20150319 test-keys
ro.build.fingerprint=softwinners/sugar_ref001/sugar-ref001:4.2.2/JDQ39/20150319:user/test-keys
ro.build.characteristics=tablet
# end build properties
#
# ADDITIONAL_BUILD_PROPERTIES
#
ro.com.android.dateformat=MM-dd-yyyy
ro.config.ringtone=Ring_Synth_04.ogg
ro.config.notification_sound=pixiedust.ogg
ro.carrier=unknown
ro.config.alarm_alert=Alarm_Classic.ogg
ro.setupwizard.mode=DISABLE
ro.com.google.gmsversion=4.2_r1
ro.com.google.clientidbase=android-orange-ouk
ro.com.google.clientidbase.ms=android-orange-ouk
ro.com.google.clientidbase.yt=android-orange-ouk
ro.com.google.clientidbase.am=android-orange-ouk
ro.com.google.clientidbase.gmm=android-orange-ouk
wifi.interface=wlan0
wifi.supplicant_scan_interval=15
ro.display.switch=1
rild.libargs=-d/dev/ttyUSB2
rild.libpath=/system/lib/libsoftwinner-ril.so
keyguard.no_require_sim=true
persist.sys.timezone=Asia/Yekaterinburg
persist.sys.language=ru
persist.sys.country=RU
drm.service.enabled=false
dalvik.vm.heapsize=256m
dalvik.vm.heapstartsize=8m
dalvik.vm.heapgrowthlimit=96m
dalvik.vm.heaptargetutilization=0.75
dalvik.vm.heapminfree=2m
dalvik.vm.heapmaxfree=8m
persist.sys.usb.config=mass_storage
persist.sys.noconfig=false
ro.property.tabletUI=true
ro.statusbar.alwayshide=true
ro.udisk.lable=sugar
ro.product.firmware=v1.3.1i
ro.sw.defaultlauncherpackage=com.kaiboer.tvlancher.sihh
ro.sw.defaultlauncherclass=com.kaiboer.tvlancher.sihh.MainActivity
audio.output.active=AUDIO_CODEC
audio.input.active=AUDIO_CODEC
ro.audio.multi.output=true
ro.sw.directlypoweroff=true
ro.softmouse.left.code=105
ro.softmouse.right.code=106
ro.softmouse.top.code=103
ro.softmouse.bottom.code=108
ro.softmouse.leftbtn.code=232
ro.softmouse.midbtn.code=-1
ro.softmouse.rightbtn.code=-1
ro.sw.shortpressleadshut=false
ro.sf.lcd_density=160
ro.sw.videotrimming=1
ro.opengles.version=131072
video.accelerate.hw=1
ro.hwa.force=true
debug.sf.hw=1
debug.composition.type=dyn
persist.sys.ui.hw=true
persist.sys.strictmode.visual=0
persist.sys.strictmode.disable=1
persist.sys.use_dithering=0
profiler.force_disable_err_rpt=1
profiler.force_disable_ulog=1
ro.kernel.android.checkjni=0
ro.config.nocheckin=1
debug.checkjni=0
debug.performance.tuning=1
service.adb.tcp.port=5555
persist.sys.adbd=false
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt
I try combinations:
Code:
persist.service.adb.enable=1
persist.service.debuggable=1
persist.sys.usb.config=mtp,adb,mass_storage
Code:
persist.service.adb.enable=1
persist.service.debuggable=1
persist.sys.usb.config=adb,mass_storage
Code:
persist.service.adb.enable=1
persist.service.debuggable=1
persist.sys.usb.config=adb
If I use ethernet - device gets ip well and I can connect via adb. But wifi in all cases can't get ip addres, there is just "getting ip address" status in settings panel. If I remove theres string - wifi works well. What can be wrong ?

I'm very late to this thread, but luckily, as of Android 11 and up, adb works over wi-fi (without USB) on non-rooted Android phones via Developer options Wireless debugging switches.