I know this was really stupid cause I'm kicking myself right now,but I tried to flash CM7 and didn't flash the update before I rebooted my phone. Now my phone comes on and shows the vibrant screen as usual and goes to the cyanogen mod screen and then goes black after that. I can't get into recovery with the three button method and I have a mac. So I can't use Odin, even though I can get into download mode. Does anyone have any suggestions? I really don't want to try and go through the process of ordering a new phone, even though I do have insurance.
i did also need help.
Need help
I did also!!
Related
hello all, I am having a bit of an issue. So as you know, there is a new 2.2 version of froyo, so i and my noob self wanted to download it, so i searched on Google on how to do it using Odin, and i did, then next thing i knew i was stuck at the recovery menu because there wasn't a "select" key on the vibrant, so my phone was semi-bricked kinda. but i fixed it by going to the download mode and downgrading my firmware back using Odin, but there was a problem, every time i booted my phone, the "Samsung GT-i9000" logo would show up, then 3 seconds later the "Vibrant" logo would show up, so 2 logos at once, that seems weird and i don't want that. but i really want my phone to be normal again! (and also my phone got unrooted for some reason after i "downgraded") and whenever i wanted my phone to go to recovery mode, you would have to use the i9000 method to get that to work, but obviously i cant use that method because i don't have a middle button on my Vibrant, and i don't want that, so my question is:
How do i make my phone normal again? do i have to use Odin to do that and what files do i have to use to bring it "back"?
plz Help!
I wanted to share my knowledge and experience from the past 2 days. Most of the help came from guides and posts on this forum so I wanted to give that back.
We were trying to root the SGS4G and because we're noobs we made the mistake of thinking it was a Vibrant. Got a Vibrant ROM and tried to flash it though Odin WITH re-partition checked. Everything we read said if you do either one of these things, you will brick your phone.
Sure enough we bricked the phone. It was trying to boot into the Vibrant ROM but was getting stuck on the word 'Vibrant' and then showing a whole lot of weird colored pixels. We then learned we'd made a massive mistake and that the phone wasn't a Vibrant after all.
We got a stock ROM for SGS4G and started trying to push them through Odin. Faced countless FAILS and freezes and finally it took us to the Recovery Mode and we tried the Restore option. It booted into a crippled SGS4G ROM. When it booted, it vibrated every 10 seconds or so and it had a null IMEI and unknown baseband.
We tried following a guide that wanted to change some text in the nv_data.bin but the numbers we were meant to be editing (0018810?) didn't exist in our nv_data.bin. So that didn't work for us.
In the meantime we tried to flash the stock ROM in Odin but kept getting FAILs and Freezes. With this step we lost even the crippled operating system and couldn't reach anything except the 'phone --!-- computer' screen. Luckily, this acts the same as download mode, so not bricked. We kept trying to push the stock SGS4G stock ROM (Froyo 2.2) several times and failing.
At one point we got a completely black screen, wouldn't turn on. Bricked again. We found this post on RootzWiki and it worked for us that time and brought it back from the black screen to download mode http://rootzwiki.com/topic/1820-how-to-unbrick-your-sgs4g/
Somehow we ended up at this guide here on XDA for fixing the "null/null" IMEI http://forum.xda-developers.com/showthread.php?t=1142829
We followed that guide. When you add the PIT file it automatically checks 'Re-Partition' in Odin, we didn't uncheck it. Bricked again. It was stuck on the Samsung logo and when we tried to get to download mode it got stuck on a black screen with the loading circle/lines and 2 computers were giving 'The USB device has malfunctioned' when we plugged it in. The unbrick guide above (RootzWiki) didn't help this time. We tried restarting the computer, let the phone rest without battery for half an hour, held power button for a minute without battery, still nothing.
Finally I accidentally pressed the power button (rather than the volume buttons to get into download mode) and it went to the samsung logo (as expected) and after that I was able to get into download mode. The key to this I think is to keep on trying powering on normally then try download mode over and over and eventually it should get unstuck and the computer should recognize it again.
Once I had it back in download mode, I followed this guide again BUT!!! I made sure to un-check re-partition and I did not check "Phone EFS Clear" (because I had tried that already before it was bricked and wanted to see if a straight ROM would work first). Everything worked perfectly, I got my IMEI and Baseband back, without modifying anything.
I don't know if this was a miracle, or if any of it will work for anyone else, but the moral of the story is don't give up even if you've done the absolute worst possible thing. I don't even think hardbrick exists on this phone after everything we were able to save it from.
Cheers
Hardbricks do exist on this phone but you have to try really hard to do it. A few people have managed it. Way to stick with it and recover your phone. I've done that more times than I can count.
hechoen said:
Hardbricks do exist on this phone but you have to try really hard to do it. A few people have managed it. Way to stick with it and recover your phone. I've done that more times than I can count.
Click to expand...
Click to collapse
I didn't feel like i really hard bricked it until i saw the USB computer connection error "device pluged in malfunctioned" in more than one PC.
Then i really felt like its a hardware BIOS chipset level problem now but man...
That story cracked me up. That is exactly why I spend days reading before I even root my phone. I made the mistake one time on my old G1 and it could not be revived.
Congrats on getting it working. (especially without flooding the q&a with redundant questions that have been described in detail several places )
hani1400 said:
I wanted to share my knowledge and experience from the past 2 days. Most of the help came from guides and posts on this forum so I wanted to give that back.
We were trying to root the SGS4G and because we're noobs we made the mistake of thinking it was a Vibrant. Got a Vibrant ROM and tried to flash it though Odin WITH re-partition checked. Everything we read said if you do either one of these things, you will brick your phone.
Sure enough we bricked the phone. It was trying to boot into the Vibrant ROM but was getting stuck on the word 'Vibrant' and then showing a whole lot of weird colored pixels. We then learned we'd made a massive mistake and that the phone wasn't a Vibrant after all.
We got a stock ROM for SGS4G and started trying to push them through Odin. Faced countless FAILS and freezes and finally it took us to the Recovery Mode and we tried the Restore option. It booted into a crippled SGS4G ROM. When it booted, it vibrated every 10 seconds or so and it had a null IMEI and unknown baseband.
We tried following a guide that wanted to change some text in the nv_data.bin but the numbers we were meant to be editing (0018810?) didn't exist in our nv_data.bin. So that didn't work for us.
In the meantime we tried to flash the stock ROM in Odin but kept getting FAILs and Freezes. With this step we lost even the crippled operating system and couldn't reach anything except the 'phone --!-- computer' screen. Luckily, this acts the same as download mode, so not bricked. We kept trying to push the stock SGS4G stock ROM (Froyo 2.2) several times and failing.
At one point we got a completely black screen, wouldn't turn on. Bricked again. We found this post on RootzWiki and it worked for us that time and brought it back from the black screen to download mode http://rootzwiki.com/topic/1820-how-to-unbrick-your-sgs4g/
Somehow we ended up at this guide here on XDA for fixing the "null/null" IMEI http://forum.xda-developers.com/showthread.php?t=1142829
We followed that guide. When you add the PIT file it automatically checks 'Re-Partition' in Odin, we didn't uncheck it. Bricked again. It was stuck on the Samsung logo and when we tried to get to download mode it got stuck on a black screen with the loading circle/lines and 2 computers were giving 'The USB device has malfunctioned' when we plugged it in. The unbrick guide above (RootzWiki) didn't help this time. We tried restarting the computer, let the phone rest without battery for half an hour, held power button for a minute without battery, still nothing.
Finally I accidentally pressed the power button (rather than the volume buttons to get into download mode) and it went to the samsung logo (as expected) and after that I was able to get into download mode. The key to this I think is to keep on trying powering on normally then try download mode over and over and eventually it should get unstuck and the computer should recognize it again.
Once I had it back in download mode, I followed this guide again BUT!!! I made sure to un-check re-partition and I did not check "Phone EFS Clear" (because I had tried that already before it was bricked and wanted to see if a straight ROM would work first). Everything worked perfectly, I got my IMEI and Baseband back, without modifying anything.
I don't know if this was a miracle, or if any of it will work for anyone else, but the moral of the story is don't give up even if you've done the absolute worst possible thing. I don't even think hardbrick exists on this phone after everything we were able to save it from.
Cheers
Click to expand...
Click to collapse
Wheooooooooowwww,..you just UNBRICKED mine, I know of the Battery pull etc...but the post you referenced
is MAGIC
This was not my first Rom nor Root on this phone, it weirdly happened while doing the GB starter....via ODIN, which i also used before..no clue what went wrong, oh well...
Thank you, thank you "i did"....Yohoooo
Yup i agree i like to read, reread then read as i do. This way i got a pretty good understanding of what I'm doing. Btw i have just started using one click and it is sooooo simple. I love it.
Sent from my SGH-T959V using XDA App
The link for fixing null/null IMEI is not working.
http://forum.xda-developers.com/showthread.php?t=1142829
diavel said:
The link for fixing null/null IMEI is not working.
http://forum.xda-developers.com/showthread.php?t=1142829
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=881162
Im still carrying this phone, stupid baseband unlock for iphone won't come out now I am carrying 2 phones, one as an ipod touch and the galaxy s! Good story, hope it can help others, but I am prepared to jump off of this bandwagon anytime now!
Hey there, apologies in advance if I have submitted this thread in the wrong section. I really looked as hard as I could before posting.
Well I rooted my phone, got super user on there, then got clockworkmod red, and then attempted to put the ice cream sandwich mod on my phone, thats where everything went sour. Phone would not go past screen that says samsung. I tried a few times to get it to go past that point, and just nothing. I then attempted to use odin to have my phone put back, but now I cannot even get the phone to open up clockworkmod.
To put it very simply. The only thing I have access to now is the download option (holding both volume up and down while inserting the usb cable from the computer) I have searched the internet high and low for something to run through odin to put my phone back to the way it was. I keep coming up with dead links and long dead downloads. I was able to use the gtg ultimate unbrick, but all that managed to accomplish was to have my phone say at&t instead of rogers.
Im still at the screen that says samsung, with no access to a recovery menu at this point. I only have the download option.
Can anyone help me salvage my phone?
edit: I appear to have been able to reput clockworkmod back on the phone with odin. Thats all I have been able to do.
When flashing any ics Rom/port from.gingerbread/red recovery you will need to double flash...I'm seeing a lot of people.with bricks lately and I think the problem is they are not reading enough before flashing ics...
So you have cwm correct? Boot into cwm by holding volume up down and power button. If you have no roms hen go to mounts and storage and mount USB then plug it into the pc and copy over the Rom...if its gingerbread Rom.just one flash...if its ics then flash, you will get stuck on Samsung screen so boot back into cwm...you will either boot into a blue or some distorted rainbowy cwm...just reflash he Rom
If you can't do that...then idk what else to do as I don't know much about rogers phones and what is and isn't compatible with them...but u would suggest qksters heimdal one click back to stock uclb3...its always worked for me...but not sure if it will work with rogers...
Sent from my HTC PH39100 using XDA
Mytheos said:
Hey there, apologies in advance if I have submitted this thread in the wrong section. I really looked as hard as I could before posting.
Well I rooted my phone, got super user on there, then got clockworkmod red, and then attempted to put the ice cream sandwich mod on my phone, thats where everything went sour. Phone would not go past screen that says samsung. I tried a few times to get it to go past that point, and just nothing. I then attempted to use odin to have my phone put back, but now I cannot even get the phone to open up clockworkmod.
To put it very simply. The only thing I have access to now is the download option (holding both volume up and down while inserting the usb cable from the computer) I have searched the internet high and low for something to run through odin to put my phone back to the way it was. I keep coming up with dead links and long dead downloads. I was able to use the gtg ultimate unbrick, but all that managed to accomplish was to have my phone say at&t instead of rogers.
Im still at the screen that says samsung, with no access to a recovery menu at this point. I only have the download option.
Can anyone help me salvage my phone?
edit: I appear to have been able to reput clockworkmod back on the phone with odin. Thats all I have been able to do.
Click to expand...
Click to collapse
If u can get to dl ur fine
Sent from my SAMSUNG-SGH-I717 using xda premium
http://forum.xda-developers.com/showthread.php?t=1331381
Use this link/program from download mode to get to stock 2.3.6.
Wait, if you can get to download mode, you can reflash JScott's option C from here, then get into CWM red, flash the ICS of your choice, reboot into CWM blue (press and hold vol up/vol dn/power 5 seconds when stuck at sammy screen), wipe data/cache/dalvik, reboot and you should have ICS.
I understand that some people will never get "it", but reading the entire post for flashing/modding firmware is a MUST.
Had a motorola droid pro given to me. Don't know much about it. Seems cool enough to tinker with or maybe use on straight talk as a backup phone. It starts up and stops on the red animated logo. It stop starts a couple of times then stops completely. While this is happening it also fades out and dissappears, like normal screen timeout almost. Can achieve bootloader screen but cant find a recovery. People have said there is a stock recovery even if it has not been rooted. Cant find it and dont know if the phone is rooted or unlocked. Seems like it is searching for something to load and just gives up. Since bootloader screen comes up i can probably fix this i would think. Maybe through odin. If i can get cwm on it i should probably be good from there. Need some guidance from someone with odin exp to point me in the right direction so i can fix it myself. What do you think ????
SCH-I535 /MOAR/Wasabi83/xda-app.
Found proper cwm and odin. Cwm has no tar file, nor is there one that i can find to download.Really don't matter cause the odin control panel don't recognize the phone. Downloaded new drivers, it makes the noise when i connect it but thats it.
SCH-I535 / MOAR / WASABI 83 / using tapatalk pro
Hey guys so my phones kernel and stuff was slightly messed up I know this because wifi didn't always work and it wouldn't work at certain places and if I reset the phones settings or factory the wifi would show up. I then thought hey I need wifi so let me put a custom mod on it. I have rooted my phone easy but never put a custom mod.. I still dont know what it does or what a custom recovery is or whatever. I tried odin and it said failed a bunch of times. I then started trying to use apps like goo manager and busy box and such and had no idea what i was doing other than following instructions blindly and I ended up using an app that was glitched I believe and when ever I started the phone it went into recovery mode. Then I stopped using the phone for a quite a while and one of my friends said he could look at it and determined that it is screwed to the point of no return. So I thought why not go for one last swing at it did some more Youtbing and did another tutorial another tarp or md5 file or whatever it is. I now have that screen which says connect to Kies for emergency firmware recovery or something. I can still access download mode and such but the main problem is 1. odin is still not working 2. Kies is now not recognizing my S4 keeps telling me it doesnt recognize it. I have a Samsung S4 verizon build number is 2g6 I believe I know the ending is 6. Its curruntly on 4.4.2 kit kat.
TLDR: The phone says that i need to hook it up to kies for emergency firmare something but kies wont recognize my phone and I cant do a hard reset and When I flash with Odin it always says Fail when it gets to the boot part
Thanks so much guys you dont know how much any help would be. Please respond this is all I will be doing all day so I can give you all extra info asap.