[Q] Trying to restore my MT4G back to factory - Android Software/Hacking General [Developers Only]

I have a fully rooted my touch 4g. I wiped everything and down graded clockworkmod from 3 to 2 and put in the stock rom into my sdcard. Now I am stuck.
What happens is:
I dont see ClockworkMod When I press and hold volume down and power button to turn the phone on
I get the usual very colorfull stock menu ( the one with green,red and blue writings)
When I put the original stock rom and turn the phone on for recovery It fails to install it
I have tried adb but phone is not regonized be pc anymore
I need directions to fix this issue ( Please Reply only if you have knowladge about this stuff)
Thank youuu

Related

[HELP] [Samsung GT-S5570] I have no access to recovery after a flash CWM

Good morning.
Firstly please excuse my English...
Let me explain my problem.
With the idea of ​​making a backup of the rom galaxy s5570 mini for my wife before passing on gingerbread, (actually on android 2.1), I wanted to flash the recovery.
The original recovery worked well, I tested it.
I followed the directions for Roms customs:
-Odin installed
-installed the samsung drivers (Kies)
-download "tass-recovery-cwm.tar"
file-TASS_v1.0.ops
-started in download mode
-put the file or run it is necessary and all in Odin and start ...
Odin said OK
The phone will restart ...
I turn off, I test and I have no access to recovery. The phone is fixed on the screen "Samsung ..."
Basically no way to access the recovery. I tried to reboot directly with QuickBoot, it does not work more.
I redid the procedure a second time just in case ... it makes no difference.
I re-download the various files, TASS.OPS, the recovery, the Samsungs drivers (on samsfirmware this time) ... nothing better.
So now, if someone can help me ...
no ideas to help me?
i've tried to flash recovery too with odin and tass-recovery-cwm.tar, only thing what happens when i try to go in recovery is showing me:
RAMDUMP Mode ( ARM9 mode) and the Samsung logo.. it's just staying there nothing else and what i can do is use power button to reboot in normal mode which boots without a problem.
Later Edit: i've just played with the phone and it seems i can boot in recovery. after a 1st fail trying to boot in recovery (the stucked Samsung logo) i hold power button, the phone reboots and when i see Samsung i press the 3 keys and it goes in recovery.
Later Edit 2: so after more playing with the phone i figured that it will boot in recovery if you press only Home + Power keys, and not as many say VolUP + Home + Power.
Falconfalc said:
i've tried to flash recovery too with odin and tass-recovery-cwm.tar, only thing what happens when i try to go in recovery is showing me:
RAMDUMP Mode ( ARM9 mode) and the Samsung logo.. it's just staying there nothing else and what i can do is use power button to reboot in normal mode which boots without a problem.
Later Edit: i've just played with the phone and it seems i can boot in recovery. after a 1st fail trying to boot in recovery (the stucked Samsung logo) i hold power button, the phone reboots and when i see Samsung i press the 3 keys and it goes in recovery.
Later Edit 2: so after more playing with the phone i figured that it will boot in recovery if you press only Home + Power keys, and not as many say VolUP + Home + Power.
Click to expand...
Click to collapse
I tired ur solution..but it didn`t works on mine..
the home key + power button = stuck on samsung logo
home key + vol up + power button = ARM9 Mode
any others solution else??
Hi, to me it happens the same thing but why? someone can help us?
Ah I see I am not alone in this problem. Should be well end up finding a solution.
I would really like to backup my original rom.
And in addition the cwm is also used to flash roms ...
And with all super talented hackers phone on this forum, there should be a solution
Too bad RomCleaner is not compatible with this phone ...
{w~w. androidiani. c~m/forum/modding-samsung-galaxy-next/54898-guida-flash-rom-stock-gingerbread-2-3-4-root. h~ml}
change ~ to what is needed and delete spaces.
(I cannot link addresses because I'm a newbe....
:-(
!!! CWM will not work on Samnsug GT-S5570 !!!
- my phone was sent back for unbrick it, stuck on Samsung logo -
...so we cannot make a backup of our ROM...
PWR + central => Samsung Recovery
PWR + VolDown + central => Download Mode
PWR hold on for 4 sec => reboot
<what else ?>
What is RAMDUMP Mode ?
What is Quickboot ?
i have the same issue & i can't find any solution
Hi i also got this problem before. Just wan to share. CWM not working with the froyo 2.2(maybe depend on phone) i also got same problem with ur.. Just upgrade to gingerbread first then use the CWM everthing should be fine..
Due to new users i cant post any link.
Just pm me who want link update to gingerbread or you all can just search in here because that i wan to post outside link. thanks for understand..
Ok thank you, good news. I will try to pass on ginger ...
I wanted to do a backup before, but hey, I would not do it and that's it ..
Well after many having difficulty in passing on gingerbread, CWM actually works ... better. Thank you for the tip.
At least he started ... but impossible to make a backup ... it makes me an error message .... pfff ....
There might still be a way...,!
there might still be an alternative way than taking your phone into a samsung service center.., if you can still boot to download mode.. you can still revive your phone...,! flash it with Odin using the Gingerbread rom...,
wish I can help...,
sorry for necroing this thread .. but this thing just happened to my 5570 .. after flashing cwm .. i dont have access to recovery .. just as the 1st post says ..

[Need Help] HardBrick after try flash ICS

Help me !!! view Hours ago... i try to flash my i9023 with ICS ROM OTA
first, i flash my Nexus S from CM7 (root) to Stock ROM (unroot). then, i login my Google Account.
after login. i try to Flash my NS with ICS
PowerButton + Volume Up, Then recovery Mode , Volume Button and Power Button then install update.zip
the process actually done !! but after i choose reboot, my phone going to brick ...
all button isn't work
Help me.. how to Unbrick??
Thanks
Any Buddy can Help me?
I don't know how exactly your phone is but first please pull out the battery and then put in again to make sure it is not just a freeze. If the phone is stilled died just plug in to computer to see whether it works.
I think it will be better to flash the ICS directly after you flash the 2.3.7 official. You don't need to get out of recovery.

[HELP] about rooting

i rooted my phone before with amits universal GB CF
i noticed that the 3 button recovery dont work anymore... is this normal? do i have to click CWM always in apps drawer instead of the 3 button to go into recover?
secondly, my brother wants his i9003 rooted too
he is also on DXKP9, and DONT want another firmware on his phone like XXKPQ
i was planning on using UC-Kernel on it, would it be possible that it will work on stock DXKP9 without issues? i read that UC-kernel already has CF.ROOT and touch CWM Recovery with it but its for XXKPQ..... interested to know on issues related to DXKP9 if any before i flash.
and lastly...whats the difference with UC-Kernel v9 1009...2009 and 3009 ?
IMP : Before you do anything make a backup
1) No that is not normal. May be you aren't pressing the buttons properly.
2) Follow the procedure to go to recovery. Press the Volume Up key + Menu key and then pressing the former two keys you need to power ON the device after which you will see the recovery screen.
3) I think UC-Kernal is universal. May be it works. Im not sure. Why dont you try and let others know ? or you can wait till someone who has flashed that firmware and UC-Kernel to answer.
4) And about UC-Kernel v9 1009...2009 and 3009 , those are 3 test versions of the kernel with different voltages supplied. For more details on that check this post by "inciongd". He's explained it beautifully.
http://forum.xda-developers.com/showthread.php?t=1357747&highlight=overclock&page=110
Do not do the VOL UP+MENU+POWER while your device is ON. Turn it OFF and then press VOL UP+MENU first then hold the POWER button until you see the samsung logo or until CWM recovery loads up. I was not able to go to recovery mode/download mode until I turn off my device.
thanks for the replies guys
but i already those 3 buttons a few times with phone turned off...already know about this since i go to recovery long ago without CWM when i do hard reset
but im new to CWM and rooting
so i had cleared cache and dalvik cache a few times already
i can only go to recovery via the CWM app
the 3 button recovery dont work for me
my buttons are all working...
the problem is when i do the 3 button recovery, it goes to samsung logo, fades for a few seconds then goes back to samsung logo again...it just vibrates and go back to samsung logo if i keep holding on.
anyone tried the universal GB amit CF.root with touch recovery and experienced the same?
noypi_ako said:
thanks for the replies guys
but i already those 3 buttons a few times with phone turned off...already know about this since i go to recovery long ago without CWM when i do hard reset
but im new to CWM and rooting
so i had cleared cache and dalvik cache a few times already
i can only go to recovery via the CWM app
the 3 button recovery dont work for me
my buttons are all working...
the problem is when i do the 3 button recovery, it goes to samsung logo, fades for a few seconds then goes back to samsung logo again...it just vibrates and go back to samsung logo if i keep holding on.
anyone tried the universal GB amit CF.root with touch recovery and experienced the same?
Click to expand...
Click to collapse
U have the extended power menu too..
but since u mentioned logo fading thingy...
Dude ur pressing the buttons too long..
as soon as u see the samsung logo appear LEAVE the buttons..u will enter the recovery mode..
nope i dont have extended power menu
im not using any custom roms with those, just stock DXKP9
before if i hold it long,it will bring me to recovery mode before i release
after the rooting with universal by amit...it will fade and just boot up
i tried your advice to release it in samsung logo and it will only boot up, tried a few times
also tried releasing it when it starts to fade,also boots up
no recovery
noypi_ako said:
nope i dont have extended power menu
im not using any custom roms with those, just stock DXKP9
before if i hold it long,it will bring me to recovery mode before i release
after the rooting with universal by amit...it will fade and just boot up
i tried your advice to release it in samsung logo and it will only boot up, tried a few times
also tried releasing it when it starts to fade,also boots up
no recovery
Click to expand...
Click to collapse
hmmm...
what is ur present rom?? just tell me dat..i wil tk a dig at it...
Edit-read ur on dxkp9...
make a nandroid and try using xda_bams universal kernel beta9 fix my personal fav...might help.. but its strange y cant u get into cwm.. grrrrrrrrr
you mean i should flash bam kernel over amits universal after i do nandroid backup?
i thought kernels are supposed to be flashed on clean stocks only as ive read
noypi_ako said:
you mean i should flash bam kernel over amits universal after i do nandroid backup?
i thought kernels are supposed to be flashed on clean stocks only as ive read
Click to expand...
Click to collapse
flash bam...wipe caches...and wipe data too...if u get FC's..
it shud work i suppose..!
i did it fr a frnd.. just wiped caches..and factory reset..

[HELP] Bricked phone

Hey please experts help me with my galaxy 3 i just bought one i had it 1 day, battery was discharged and after i charged it i got bootloop I tried many roms and i always got : bootloop, boot screen with GT-I5800 or screen Kernel panic upload mode. I cant go into recovery mode i dont know hy it dont works (its vol+,vol -, home, power isnt it?) I cant root it i cant do anything. Anybody have some ideas what to do or its bricked? If its important i can still go into download mode and flash it using Odin thats all i can do with this phone. Pls heeeelp.
P.S.
Its not like that i dont red the forum i sited here many hours and still i didnt find solve of my problem. I guess i am too dummy ;/ I will be graceful sboody ?: (
Here comes help!
Welcome to the forum, btw
First thing you should do is hold on a little bit.
To solve your problem try to get to download mode (VOL-, HOME, POWER, then after phone turns on, release power) and flash Kyrillos' ROM (FROYO - v9.0) - fire up odin, tick one package, select tar and flash it. AFTER the flashing ends, you should boot up to recovery (CWM recovery for G3MOD kernel). Here, navigate through menu using VOL+, VOL- and navigate to "Wipe data/factory reset" option. Now press HOME button to confirm. Navigate again to Yes, press HOME again and wait till its done.
Now Navigate to "Reboot" or something like that - its the first option in there. Then press HOME again. You should see the phone rebooting and then displaying the bootanimation - it lasts for aprox. 10-20minutes, so don't panic!
If this wont solve your problem, give me more info
- New or used phone - THIS IS ABSOLUTELY IMPORTANT TO KNOW BECAUSE IF YOU HAD NEW, YOU HAD 2.1 FIRMWARE ON IT
- Did you wipe data/factory reset phone
- What else you tried?
- etc, etc...
There will be solution somewhere... I'm sure. But post the result after trying that.
PS: here on xda is a little THANKS button... Use it instead of "THANK YOU" posts. (Just in case you didn't know)
twinky444 said:
Welcome to the forum, btw
First thing you should do is hold on a little bit.
To solve your problem try to get to download mode (VOL-, HOME, POWER, then after phone turns on, release power) and flash Kyrillos' ROM (FROYO - v9.0) - fire up odin, tick one package, select tar and flash it. AFTER the flashing ends, you should boot up to recovery (CWM recovery for G3MOD kernel). Here, navigate through menu using VOL+, VOL- and navigate to "Wipe data/factory reset" option. Now press HOME button to confirm. Navigate again to Yes, press HOME again and wait till its done.
Now Navigate to "Reboot" or something like that - its the first option in there. Then press HOME again. You should see the phone rebooting and then displaying the bootanimation - it lasts for aprox. 10-20minutes, so don't panic!
If this wont solve your problem, give me more info
- New or used phone - THIS IS ABSOLUTELY IMPORTANT TO KNOW BECAUSE IF YOU HAD NEW, YOU HAD 2.1 FIRMWARE ON IT
- Did you wipe data/factory reset phone
- What else you tried?
- etc, etc...
There will be solution somewhere... I'm sure. But post the result after trying that.
PS: here on xda is a little THANKS button... Use it instead of "THANK YOU" posts. (Just in case you didn't know)
Click to expand...
Click to collapse
Thank u very much man phone was used but it had 2.1 stock firmware on it, i didnt wipe/ factory reset on phone, and i didnt't tied sthing else.
Now tell me after flashing Kyrillos' rom v9.0 Do I have flash kernel with CWM or its in Kyrillos already? How to enter CWM recovery mode ? Same as normal (VOL +, VOL-, HOME, then POWER) I did thank u cuz it sounds logical what u wrote thank u man and I am waiting for reply.
CWM is pre-installed on Kyrillos rom. To boot into CWM recover just turn the phone on, hold the power button until a menu comes up and in the menu it will say recover. Press recovery to go into recovery mode.
--------------------------------
Click thanks if I helped.
I did flashed kyrillo's v 9.0 and and after flashing phone just stay in boot screen and nothing happends. I cant do anything again. Do root is needed to flash ROM's cuz when my phone crashed it wasnt rooted and now i cant root it cuz computer only see it as Modem and composite device mode ;/ I dont know what to do.
KamelusPL said:
I did flashed kyrillo's v 9.0 and and after flashing phone just stay in boot screen and nothing happends. I cant do anything again. Do root is needed to flash ROM's cuz when my phone crashed it wasnt rooted and now i cant root it cuz computer only see it as Modem and capcitive mode ;/ I dont know what to do.
Click to expand...
Click to collapse
Turn your phone off by pulling the battery out. The put the battery back in but don't turn the phone on. Hold the volume up + volume down + home button + power button and as soon as the screen turns on, let go of the button. This will take you into CWM recovery. Then, in recovery, select wipe data/ factory reset, then wipe cache and then wipe the dalvik cache. These options are all in recovery and are easy to find. Then reboot the phone and it should work. Also you don't need to root your phone to flash a custom ROM.
--------------------------------
Click thanks if I helped.
MicroGeek said:
Turn your phone off by pulling the battery out. The put the battery back in but don't turn the phone on. Hold the volume up + volume down + home button + power button and as soon as the screen turns on, let go of the button. This will take you into CWM recovery. Then, in recovery, select wipe data/ factory reset, then wipe cache and then wipe the dalvik cache. These options are all in recovery and are easy to find. Then reboot the phone and it should work. Also you don't need to root your phone to flash a custom ROM.
--------------------------------
Click thanks if I helped.
Click to expand...
Click to collapse
The problem is that this recovery mode dont works .... :S Look I am serious
xxx.youtube.com/watch?v=lZ5ySu_wZKY
In url change xxx to www i cant post outside links
MicroGeek said:
CWM is pre-installed on Kyrillos rom. To boot into CWM recover just turn the phone on, hold the power button until a menu comes up and in the menu it will say recover. Press recovery to go into recovery mode.
--------------------------------
Click thanks if I helped.
Click to expand...
Click to collapse
You probably have confused Samsung galaxy 3 with Samsung galaxy S3 because this phone (Galaxy 3) Hasn't menu that you can boot to recovery/bootloader with. At least I dont know about such "menu" thing.
---------- Post added at 03:13 PM ---------- Previous post was at 03:01 PM ----------
----------------------------------------------------------------------- SOLUTION! ---------------------------------------------------------
@KamelusPL: You said that you cant boot after flashing Kyrillo's ROM v9.0. And you had Android 2.1 and you couldn't boot. That means you have been in hurry to get things really fast done and flashed FROYO ROM WITHOUT BOOTLOADERS OVER 2.1 THAT COMES WITH ITS OWN TYPE OF BOOTLOADER = bricked.
HOWEVER, there's a solution! yeah!
This is a bit risky, but if you want your phone working again, you must do that. I'm saying again, I take no responsibility over such things.
1. Put your phone into download mode. This must be working.
2. Download this file: http://hotfile.com/dl/132526357/46bd186/I5800XXJPS_OXX_Android_2.2.rar.html
3. Open odin, tick ONE PACKAGE, in the down right corner click ONE PACKAGE and select .tar file you downloaded. ITS WITH PROPER BOOTLOADERS - FROYO XXJPS. That must work.
4. Click start. NOW DO NOT TOUCH YOUR PC until its done!
5. Wait till its done and wait till your phone boots up.
6. If you will have still bootloop, then you must boot into recovery (YOU MUST WAIT... RECOVERY WONT SHOW IMMEDIATELY just like in download mode... wait man.), here navigate using the same keys I told you before, and select wipe data / factory reset, then select yes and wait till its done. Then, navigate to wipe cache partition, select yes and wait till its done. Then, select reboot system now and press HOME.
7. This should be working!
This menu! Recovery is the second last option and I have a galaxy 3...
Edit: also I would recommend doing what the Guy above said. To boot into download mode you hold volume down + home button and the power button. :thumbup:
--------------------------------
Click thanks if I helped.
MicroGeek said:
This menu! Recovery is the second last option and I have a galaxy 3...
Edit: also I would recommend doing what the Guy above said. To boot into download mode you hold volume down + home button and the power button. :thumbup:
--------------------------------
Click thanks if I helped.
Click to expand...
Click to collapse
Sorry, I mean when booting phone theres no menu like fastboot or something like that because he said he cant boot it anymore.
Sorry, Im now using cyanogenmod 7 so I didn't know that
So I'm sorry
Sent from my GT-I5800 using xda app-developers app
Its interesting when I flash android 2.1 I got bootloop and when I flash higher android or other mod, I tried all i got stuck on Samsung logo what it may be phone is still bricked i guess there is no help ;/
@twinky444
I tried ur advice i flashed that Froyo loader and still nothing( Lag on samsung logo) what should i do ? :X
Is there other way to start that recovery ;/ I am confussed and depressed ;<
KamelusPL said:
Its interesting when I flash android 2.1 I got bootloop and when I flash higher android or other mod, I tried all i got stuck on Samsung logo what it may be phone is still bricked i guess there is no help ;/
@twinky444
I tried ur advice i flashed that Froyo loader and still nothing( Lag on samsung logo) what should i do ? :X
Is there other way to start that recovery ;/ I am confussed and depressed ;<
Click to expand...
Click to collapse
Hold vol up+down and power and home button when the phone is off and let go of the power button once you see something on the screen.
Sent from my GT-I9003 using xda app-developers app
Wait, so when you bought your phone yesterday the battery was discharged? So you didn't check if it was working or not before you bought it? Maybe you were scammed into buying a broken phone
--------------------------------
Click thanks if I helped.
Any other way to enter the recovery? I'm afraid not.
Maybe this has somethig to do with flashing CUSTOM FROYO ROM over 2.1. Because Kyrillos' ROM's kernel converts filesystems to other ones than the stock RFS that is used by stock samsung roms. That means the phone after flashing stock rom directly after some custom froyo roms dont recognize the partitions in different filesystems. So you must wipe data and cache partition to get the phone to recognize theese partitions again.
After that, the phone will boot. BUT YOU MUST BOOT IT TO RECOVERY AND WIPE DATA SOMEHOW.
This is really wierd... If you can go to download mode, I'm sure this can still be fixed somehow, but the stock froyo rom should boot into recovery anyways...
Have you tried getting to recovery when you first saw the phone that its not booting? I mean at the beggining of this problem if you had still 2.1 when you got the phone? Because wiping data from recovery on 2.1 should have solved this problem I think...
EDIT: HERE IN XDA IS SOME FILE - zerofill.tar THAT IF YOU FLASH IT, YOU PROBABLY GET WIPED PARTITIONS, but not sure... TRY THAT - I think rkoby13 has posted this file somewhere... Try to PM him...
twinky444 said:
Any other way to enter the recovery? I'm afraid not.
Maybe this has somethig to do with flashing CUSTOM FROYO ROM over 2.1. Because Kyrillos' ROM's kernel converts filesystems to other ones than the stock RFS that is used by stock samsung roms. That means the phone after flashing stock rom directly after some custom froyo roms dont recognize the partitions in different filesystems. So you must wipe data and cache partition to get the phone to recognize theese partitions again.
After that, the phone will boot. BUT YOU MUST BOOT IT TO RECOVERY AND WIPE DATA SOMEHOW.
This is really wierd... If you can go to download mode, I'm sure this can still be fixed somehow, but the stock froyo rom should boot into recovery anyways...
Have you tried getting to recovery when you first saw the phone that its not booting? I mean at the beggining of this problem if you had still 2.1 when you got the phone? Because wiping data from recovery on 2.1 should have solved this problem I think...
EDIT: HERE IN XDA IS SOME FILE - zerofill.tar THAT IF YOU FLASH IT, YOU PROBABLY GET WIPED PARTITIONS, but not sure... TRY THAT - I think rkoby13 has posted this file somewhere... Try to PM him...
Click to expand...
Click to collapse
U have absolutly right that they to solve this is enter recovery mode but i think my problem is deeper i found something on my own. Look.
If your GSII has the folowing symptoms :
Bootloop
Stuck on GSII logo, but already removed the battery to try to fix it
Enters Download mode and Recovery mode
It means that you are soft bricked and is easy to solve.
But if your symptoms are the mentioned above, PLUS the symptoms below
Enters Download mode but does NOT enter recovery mode (usually means a NAND rw corruption)
Doesn't flash
Bad flash in odin (FAIL after flashing, or the flashing suddenly stops)
It looks like I must use all my brain power to solve that i guess i need to go deeper into android stuff cuz i wont give up. I even gave my phone to service but seems like that dude is lame and he is not so much expert like i need i send message to Kyrillos cuz i guess he knows all bout androids and all that stuff and thats the person who i need some1 very good must see my topic guess i will just read learn and w8 for help thank u all for advices
After watching your youtube video I am confused. You try to get in into recovery, but don't even wait 10 seconds before you remove the battery?
Before you start make sure the battery is not empty or even broken. Charge until it reports full.
Battery out for a while, remove charging cable. Then battery in, press Vol+ and Vol-, add Home, then Power, as soon as something appears onscreen let go all three. Then WAIT. What happens?
If it stays on the GT I5800 screen for longer than a minute on a stock Eclair AND stock Froyo (from twinky's advice), you probably have a serious hardware issue. Did this device you bought ever work properly for you? That's important. If you really bought a phone that you never saw working, it's most likely hopelessly dead. If it worked, and showed the reported error after a day, there might be hope.
edit: I had countless bootloops/flash FAILs/tons of FC after 1st boot/corrupted FS... don't give up! As long as download mode is still accessable, it's not dead yet!
martialaw said:
After watching your youtube video I am confused. You try to get in into recovery, but don't even wait 10 seconds before you remove the battery?
Before you start make sure the battery is not empty or even broken. Charge until it reports full.
Battery out for a while, remove charging cable. Then battery in, press Vol+ and Vol-, add Home, then Power, as soon as something appears onscreen let go all three. Then WAIT. What happens?
If it stays on the GT I5800 screen for longer than a minute on a stock Eclair AND stock Froyo (from twinky's advice), you probably have a serious hardware issue. Did this device you bought ever work properly for you? That's important. If you really bought a phone that you never saw working, it's most likely hopelessly dead. If it worked, and showed the reported error after a day, there might be hope.
edit: I had countless bootloops/flash FAILs/tons of FC after 1st boot/corrupted FS... don't give up! As long as download mode is still accessable, it's not dead yet!
Click to expand...
Click to collapse
Dude u rly think i am so stupid?
Phone was working when i bought it i suspect that some sort of application crashed it( i guess taskkiller), i did tried to take out battery for longer time even 1 day ... And i did tried to hold buttons longer
Its bad flash that has made the situation...
Flash zero fill.tar which will clean your system
Flash again a rom using 'Forced download mode' ( vol+, home, power button)
Note: you should restart your phone by keys when its still on after zero fill flash using the force download keys.
Sent from my GT-I5800 using xda premium
KamelusPL said:
Dude u rly think i am so stupid?
Phone was working when i bought it i suspect that some sort of application crashed it( i guess taskkiller), i did tried to take out battery for longer time even 1 day ... And i did tried to hold buttons longer
Click to expand...
Click to collapse
Sorry, I was just telling from the video. But a software like taskkiller cannot mess up the whole phone in a way that prevents access to recovery.
Try cleaning the ROM like in above post and then flash a bootloaderfree stockrom. That should leave you with a perfect situation to start all over again.
Hi,I don't know if the word "bricked" or "drowned" is the best match for my case,but anyways here is my story:I had installed on my phone the kyrilos rom,I don't remember wich version excactly it has been too long before.My phone fell into a glass of water,I pulled battery out,dried it up with hair styler,after that it had some water marks on the screen and it was working quite good,I re-flashed it abd worked better,the watwr marks on the screen dissappeared and got better...but...my girlfriend reebooted accidently in recovery and it dropped dead,froze,I pulled the battery out,reebooted,and after that I am stuck in phone's logo and it keeps loading nothing ..forever..and I can't even boot to recovery mode..any ideas?I've searched in this blog and I couldn't find anything to do..please help me..
Sent from my GT-S6500 using xda premium

[Q] Bricked motorola xt910? Need help please!!!

Hi there, thanks in advance for your kind support on the overall aspects of android development.
here is what i have done.
i wanted to update my motorola xt910 with 4.0.4 ics to CM10 (CYANOGENMOD)10
So i get the cm10 rom and google apps on my sd card
And installed the clockworkmod recovery 5.8.4.5 black edition
http://forum.xda-developers.com/showthread.php?t=1751826
then i made the procedures after install the apk
after that i reboot in cwm and make a backup of the existing rom
and reboot the phone.
then i dowload the rom manager from the app store, install it and select the right recovery 3.+++ for the razr reboot the phone .
then i went on rom manager and enter in clockword mod and install the rom cm 10 (after i installed it i remember i should wipe data and cache) so i after installed cm10, i wiped data and cache, and right after i installed again the cm10 rom and google aps, without even reboot or leave rom manager app, after that i rebooted the phone and the only thing it shows me its the M logo on start.
I cant go to fastboot either, doesnt recognise the rsd lite.
And it only "boots" if its called that way if i hit power + vol up + vol down. but then it only appears the M logo for a few seconds and then the cell it turns off (i guess). it was with a fully 100% battery when i did the procedure.
Any way to solve this?
it detects when i conect it to the pc, but it doesnt show anything, only the sound that some usb thing is conected and then disconected, no card showing nothing, just the sound.
ANY HELP WILL BE GLADLY WELCOME!!!
THANKS
nuno cravo said:
Hi there, thanks in advance for your kind support on the overall aspects of android development.
here is what i have done.
i wanted to update my motorola xt910 with 4.0.4 ics to CM10 (CYANOGENMOD)10
So i get the cm10 rom and google apps on my sd card
And installed the clockworkmod recovery 5.8.4.5 black edition
http://forum.xda-developers.com/showthread.php?t=1751826
then i made the procedures after install the apk
after that i reboot in cwm and make a backup of the existing rom
and reboot the phone.
then i dowload the rom manager from the app store, install it and select the right recovery 3.+++ for the razr reboot the phone .
then i went on rom manager and enter in clockword mod and install the rom cm 10 (after i installed it i remember i should wipe data and cache) so i after installed cm10, i wiped data and cache, and right after i installed again the cm10 rom and google aps, without even reboot or leave rom manager app, after that i rebooted the phone and the only thing it shows me its the M logo on start.
I cant go to fastboot either, doesnt recognise the rsd lite.
And it only "boots" if its called that way if i hit power + vol up + vol down. but then it only appears the M logo for a few seconds and then the cell it turns off (i guess). it was with a fully 100% battery when i did the procedure.
Any way to solve this?
it detects when i conect it to the pc, but it doesnt show anything, only the sound that some usb thing is conected and then disconected, no card showing nothing, just the sound.
ANY HELP WILL BE GLADLY WELCOME!!!
THANKS
Click to expand...
Click to collapse
I have successfully manage to UNBRICK IT.
here is the procedure i have done:
1-plug it in motorola cable and put the rsdlite on
2-plug the usb on the computer (you will hear the sound of some usb beeing conected but nothing else)
3- hit the power buton + vol up + vol down several times until it appears fast boot
ex: you click it now see the M logo, and then you hit it again on power + vol up + vol down, all of this with the cable conected to the pc and the rsd lite on.
4-after it entered on fastboot mode, you will see a black screen with some white writing on it
5-get a fastboot xml of your rom (in my case brasilian one) and flash it true the rsd, wait wait wait until the process finishes and dont disconect or touch anything. In my case it took about 15 minutes with several stops and bootloops on the same procedure, but i successfully manage to bring it to life.
Note this method will only work if you have enough battery on your phone, if not try to buy a factory cable to charge the battery via USB port and then try it on.
Remember to charge 5% you will nedd to get it on the usb about 15 minuts or so, if you plan to do this procedure i will hardly advice you to leave it about 5hours to fully charge your battery and you get the job done without any other issues.
Thanks to all and i hope this thread will be helpfull to others too.
Chears
Nuno
THANKS!
Thanks ma,, you saved my device!!!!

Categories

Resources