Database Info

[HOW TO] Flash Froyo without loosing downgradability and keeping cam flash

Thought I'd better post this before everyone flashes these sbfs and looses downgradability (is that a word?)
So as you may have worked out this process is if you have never flashed a non downgradable .sbf i.e you have never flashed 2.51 eclair or the 2.2 GB/US 2.2 froyo. If you flashed these then this won't work for you and youve lost downgrability.
Follow the process below, This works with the TMobile US and The GB 3.4.2 Firmwares.
It may seem long winded, but it is the only way to get it running with everything working ok and still downgradable/able to flash other .sbf, most notably the cam flash working 100% - fully sync'd and no greeny blue tinge to it.
Need the Chinese 2.2 release – Download Here
Need the system.img nandroid and boot/devtree.sbf – Download here
Also now added the GB system image+md5 - the one that racca added in the original thread. Download hear
• Flash the Chinese .sbf by RSD lite
• Once booted root via superoneclick http://bit.ly/gUzV19 then reboot (make site debugging on)
• Install Clockworkmod recovery app http://bit.ly/dOdhKc , open app, install recovery and then boot into recovery (make sure debugging is off whenever you boot into recovery
• Wipe data/cache in recovery
• Flash the Tmob 3.42 system image(pre rooted) via advanced restore (folder need to be put in goapkrev/backup folder)
• Once restored pull battery, put battery back in while holding up to get into bootloader
• Flash the boot/devtree.sbf once its rebooted after this you are done.
If you want to use the GB release then just restore the system.img from the GB release.
Enjoy and don't get locked in peoples.
Thanks to adlx whom I enjoyed working with to figure this out - team effort! +as always Sorensiim for the hosting!

I don't think you actually need to flash anything other than boot/devtree.
I tried TMO with uk2.51 and it was just fine.
And if someone followed your post exactly as it is now. Chances are they'd
get their phone bricked (since many are already on 2.51).
Easy to fix for sure, but since it is most likely meant for less experienced
users, we really don't want that, right?
BTW
Thanks for writing it up.

Quick question for you Higgsy...
On one of the original T-Mobile Froyo threads, you posted update files to bypass the Motoblur Setup ("Skip_Blur_adlx-signed" worked fantastically...much thanks!).
Are those modifications included in these posted files already?
EDIT: Went ahead and tried it both with and without the update. Answer is that you cannot skip Moto Setup with this install; however, the Skip_Blue_adlx-signed update will allow you to if the update is applied before leaving recovery.
EDIT: Credit goes to adlx, as it was his file (mis-remembered...should have known better from the file name though). Using Higgsy's instructions and links and adlx's update, I now have a working working US 3.42 with the Motoblur setup bypassed. Thanks to all those who made that possible.

sorry to bother, but as I am now having the green light problem after flashing the "flash fix" several weeks ago, can I get the normal flash back using this method?
and thank you for your work....

conradlyn said:
sorry to bother, but as I am now having the green light problem after flashing the "flash fix" several weeks ago, can I get the normal flash back using this method?
and thank you for your work....
Click to expand...
Click to collapse
No you can't. Nandroid backup and/or SBF won't do anything on that front.

As I am on the UK sbf, this will not be of much use to me. Thankfully, I have no issues with that sbf, so I do not need this.
That said, thank you from those who do.

racca said:
No you can't. Nandroid backup and/or SBF won't do anything on that front.
Click to expand...
Click to collapse
what do you mean by "on that front"?
means that fix package consists some fundamental codes that had thoroughly change the hardware control? and nandroid backup as well as SBF could not overwrite that part?

Forgot to put in the post this is if you have not flashed a non downgradable .sbf before, although I would have thought people would be able to work that out by the nature of the thread.
This will work and will fix you cam flash if you are coming from 2.21+2.35 Eclair ROMs or 2.2 Chinese ROM where you haven't flashed a non downgradable .sbf

Higgsy said:
If you want to use the GB release then just restore the system.img from the GB release.
Click to expand...
Click to collapse
Can you provide a link to that image?

Raccroc said:
Quick question for you Higgsy...
On one of the original T-Mobile Froyo threads, you posted update files to bypass the Motoblur Setup ("Skip_Blur_adlx-signed" worked fantastically...much thanks!).
Are those modifications included in these posted files already?
EDIT: Went ahead and tried it both with and without the update. Answer is that you cannot skip Moto Setup with this install; however, the Skip_Blue_adlx-signed update will allow you to if the update is applied before leaving recovery.
Click to expand...
Click to collapse
I never posted that! and I never used that fix! On the US 3.4.2 you can't skip setup, on the GB 3.4.2 you can skip set up.
conradlyn said:
sorry to bother, but as I am now having the green light problem after flashing the "flash fix" several weeks ago, can I get the normal flash back using this method?
and thank you for your work....
Click to expand...
Click to collapse
If you never installed a non downgradable sbf as per the updated op then yes.
racca said:
No you can't. Nandroid backup and/or SBF won't do anything on that front.
Click to expand...
Click to collapse
appriciate you helping people mate, but let me answer the questions that people have on a procedure that I have written #justsayin

Raccroc said:
On one of the original T-Mobile Froyo threads, you posted update files to bypass the Motoblur Setup ("Skip_Blur_adlx-signed" worked fantastically...much thanks!).
Are those modifications included in these posted files already?
EDIT: Went ahead and tried it both with and without the update. Answer is that you cannot skip Moto Setup with this install; however, the Skip_Blue_adlx-signed update will allow you to if the update is applied before leaving recovery.
Click to expand...
Click to collapse
I think I did post this Skip_Blur_adlx-signed, as I'm adlx lol (although I'm registred here as adlxdum). And yes, it has to be flashed RIEGHT AFTER restoring the nandroid, as I stated. (I can't find the post...)
EDIT: was http://forum.xda-developers.com/showpost.php?p=10930470&postcount=149

Thanks mate, my DEFY is perfect now.

Muznyu said:
Thanks mate, my DEFY is perfect now.
Click to expand...
Click to collapse
Whoop!!!!!!!!!!!!!!!!!!!!!!

Higgsy said:
If you never installed a non downgradable sbf as per the updated op then yes.
Click to expand...
Click to collapse
too bad that you didn't mention this when the post was originally created. when i see this answer, my defy has already been stuffed with 2.2 GB.

conradlyn said:
too bad that you didn't mention this when post was originally created. when i see this answer, my defy has already been stuffed with 2.2 GB.
Click to expand...
Click to collapse
My advice to anyone when something new comes out (not that its any consolation I'm sorry) is to sit back and watch how things pan out, rather than jumping in.

Higgsy said:
My advice to anyone when something new comes out (not that its any consolation I'm sorry) is to sit back and watch how things pan out, rather than jumping in.
Click to expand...
Click to collapse
i also tried to hold on to this rule even before i bought my defy, but just can't reject the temptation of new ROMs...
you couldn't imagine how much i hate myself now, damn!
i could only pray for a real fix on the flash light by great guys like you, Higgsy

Higgsy said:
appriciate you helping people mate, but let me answer the questions that people have on a procedure that I have written #justsayin
Click to expand...
Click to collapse
I might have misread the question
What I meant was that this is not likely to fix the green light problem,
which is not what's asked obviously.

racca said:
I might have misread the question
What I meant was that this is not likely to fix the green light problem,
which is not what's asked obviously.
Click to expand...
Click to collapse
It does fix the green light problem, I wouldn't have posted it if I hadn't spent hors testing to find a fix for the problem lol

Higgsy said:
It does fix the green light problem, I wouldn't have posted it if I hadn't spent hors testing to find a fix for the problem lol
Click to expand...
Click to collapse
man, it is astonishing to see that it does fix, it seems that the green light indeed could be fix. but how?
is it only can be done by your operation procedure, or some independent files could be ported and flashed to fix?

Thanks a lot Higgsy. I'll try your turorial. Could I translate your topic to put it on a French forum ? (i'll put a link to the original thread)

Need 3.1 boot.img

I need someone with the xoom 3G with 3.1 to run this command in an adb shell and post it. I flashed an older boot.img before making a backup
cat /dev/block/platform/sdhci-tegra.3/by-name/boot > /sdcard/boot.img
Thanks in advance.

I think it's in the update.zip package, as bootloader.bin

Bauxite said:
I think it's in the update.zip package, as bootloader.bin
Click to expand...
Click to collapse
NO, that's the bootloader. The boot.img is the kernel.

Bauxite said:
I think it's in the update.zip package, as bootloader.bin
Click to expand...
Click to collapse
I saw that in there but I decided to flash back to 3.0.1 without wiping my data (the apps really don't like that) and I'm reupdating to 3.1 now. I'll post the boot file when I'm back up and running in case someone else needs it.
Well I forgot I lost root in the manual update so I can't extract it yet. At least you can revert to 3.0.1 if you make the mistake I did and reflash 3.1.

One problem
I get Permission Denied, since I lost root when I applied the 3.1 update.
I was curious, about to try flashing koush's rootboot.img and getting root back; however I wanted a backup of the 3.1 boot.img as well, and only found the boot.img.p in the update and I'm not quite sure if that will do me any good.
At any rate, hope someone can run that command for you (and me)

tekuru said:
I get Permission Denied, since I lost root when I applied the 3.1 update.
I was curious, about to try flashing koush's rootboot.img and getting root back; however I wanted a backup of the 3.1 boot.img as well, and only found the boot.img.p in the update and I'm not quite sure if that will do me any good.
At any rate, hope someone can run that command for you (and me)
Click to expand...
Click to collapse
The boot.img.p is a binary patch that's applied to the original boot. There's an applypatch tool in the Android sources that can apply binary patches, so if you have the stock boot from the previous version and can apply the patch, you have a 3.1 boot.img without doing anything.

tekuru said:
I get Permission Denied, since I lost root when I applied the 3.1 update.
I was curious, about to try flashing koush's rootboot.img and getting root back; however I wanted a backup of the 3.1 boot.img as well, and only found the boot.img.p in the update and I'm not quite sure if that will do me any good.
At any rate, hope someone can run that command for you (and me)
Click to expand...
Click to collapse
Don't flash rootboot, that is what I did that screwed me up. We'll have to wait for another root img to flash that is updated for 3.1.

Excellent, thanks. Going to be on my way doing that, will return if successful.. assuming applypatch can be run in windows, if not I will have to dust off an older ubuntu notebook and get started.

Aaannd thank you, too, glad I came here before taking the plunge. I will do my best to get you the patched boot.img

tekuru said:
Excellent, thanks. Going to be on my way doing that, will return if successful.. assuming applypatch can be run in windows, if not I will have to dust off an older ubuntu notebook and get started.
Click to expand...
Click to collapse
As the android sources only build on 'nix, it's a 'nix executable.

We have both the 3g and the wifi stock images in the irc channel

bwcorvus said:
We have both the 3g and the wifi stock images in the irc channel
Click to expand...
Click to collapse
Mind putting them on multiupload or such for those of us not in the channel?

boot image
*EDIT: Thought I should point out that this is from the Verizon 3G Xoom*
Okay so here is the boot.img that is the result of the patch.
http://www.multiupload.com/LFUP6NY7A7
Since applypatch needs the SHA1 values of the source/target files, I took them from the updater script:
Code:
apply_patch("EMMC:/dev/block/platform/sdhci-tegra.3/by-name/boot:8388608:17c91cba04ae40ebdc28cd7a5cbd9eb5e9bb33fd:8388608:e95341ff1b5f5cb2e246f028cc127083f14e0a40",
"-", e95341ff1b5f5cb2e246f028cc127083f14e0a40, 8388608,
17c91cba04ae40ebdc28cd7a5cbd9eb5e9bb33fd, package_extract_file("patch/boot.img.p"));
Then I wound up with this command, which I ended up running on my evo with the applypatch from the cyanogenmod update package, since my linux notebook wasn't happy being unused for so long.
Code:
# applypatch boot.img boot31.img e95341ff1b5f5cb2e246f028cc127083f14e0a40 8388608 17C91CBA04AE40EBDC28CD7A5CBD9EB5E9BB33FD:boot.img.p
And that resulted in the file I have uploaded, boot31.img. it matches the CRC from the install script, so we should be good to go.

tekuru said:
Mind putting them on multiupload or such for those of us not in the channel?
Click to expand...
Click to collapse
http://www.mediafire.com/?fzet7g9u770v286
Wifi stock 3.1 boot.img

tekuru said:
Then I wound up with this command, which I ended up running on my evo with the applypatch from the cyanogenmod update package, since my linux notebook wasn't happy being unused for so long.
Click to expand...
Click to collapse
Yeah, I'm a doofus, the android sources build a native binary, not a host binary. (You don't even need CM, because it's part of the standard Android tool suite).
But I'm glad you got that working.

ydaraishy said:
Yeah, I'm a doofus, the android sources build a native binary, not a host binary. (You don't even need CM, because it's part of the standard Android tool suite).
But I'm glad you got that working.
Click to expand...
Click to collapse
Guess it kind of worked out then -- I never even got to try on my computer, just thought about using the CM version since thats what was on the handset and I didn't know if I would have issues with an official build or whatnot.. and it just sort of worked. I can luck out occasionally it seems.. now back to OP's original thought, how to get root back

tekuru said:
Guess it kind of worked out then -- I never even got to try on my computer, just thought about using the CM version since thats what was on the handset and I didn't know if I would have issues with an official build or whatnot.. and it just sort of worked. I can luck out occasionally it seems.. now back to OP's original thought, how to get root back
Click to expand...
Click to collapse
Easy. Split the new boot image into kernel and ramdisk, and change ro.secure back, then wrap it all back together.
(Given that your 'nix machine is out of commission, I'm trying to do this for you now.)

Here, I hope this works for rootz, usual disclaimers apply. I can't test it myself because I don't have a device, though, sorry
(But you should have a stock image to work with, though, and if all else fails, flash HRI66 and reapply the update.)

ydaraishy said:
Here, I hope this works for rootz, usual disclaimers apply. I can't test it myself because I don't have a device, though, sorry
(But you should have a stock image to work with, though, and if all else fails, flash HRI66 and reapply the update.)
Click to expand...
Click to collapse
Just flashed it and booting now will let you know if this works
Thanks
Edit: That works. Once I rebooted I just was able to adb remount and push su to /system/bin and chmod it. Now have root on 3.1 Xoom.
Great job

Worked for me as well, thanks

[GUIDE] Official [unroot] guide here

I have seen a lot of unfinished info on UNROOTING so rather than see a bunch of people stuck like I was last night I thought I would toss a little guide together for everyone.
I take no credit for any guides I post just pitching in, if I help you CLICK me a THANKS!
download the asus firmware from here: http://dlcdnet.asus.com/pub/ASUS/EeePAD/TF101/UpdateLauncher_US_epad_user_8239.zip
extract the blob from the zip file and put it in your adb folder located at something like:
AndroidSDK/platform-tools/
as you did to root the device.
open cmd promt window type the following and return after each.
\cd
\cd AndroidSDK\platform-tools\
adb devices
*adb your device make sure it is hooked up and id'ing your transformer.*
adb push blob /data/local
adb shell
*at the # type the following*
dd if=/data/local/blob of=/dev/block/mmcblk0p4
*wait a few mins to be safe*
now reboot the device, on reboot you should see a progress bar indicating the flashing of the “blob” file. this will remove the clockwork recovery and put your tablet into BOOTLOOP this is ok.
----------------------------------------------------------------------------------
-----------------------------------------------------------------------------------
Now that your tablet is stuck in a boot loop, put on the root of the micro sd card on your computer-> the update normally found in the asus/update/ folder from the firmware zip you download from asus. I used the .9 US update and it worked fine, you must then rename it to EP101_SDUPDATE.zip make sure you leave it a zip dont change the extension AND->make sure it is on the root of the card.
Now put your card in your transformer, hold the down volume and power till it prompts you in the upper left about wiping or booting to recovery**> let go and push up on the volume, which will load the factory recovery android with a box and a loading bar *** IF IT IS STILL CLOCKWORK RECOVERY THEN YOU MISSED SOMETHING START OVER DO NOT CONTINUE***> it will begin to flash the update do not bother it turn it off or anything else will take up to 10 mins to complete. it will restart and you will see the bar load again on boot up then it will boot to the asus logo and then to the homescreen and your good.
-Ian

Faved for later use when INeed to RMA
Sent from my Transformer TF101

I don't have .12 for you, but here is a link to .9 (That's the one that really matters anyway right?). I would appreciate a link to .12 just for my OCD.
V8.2.3.9(US)
http://db.tt/EEElFqP
If you could please rehost it somewhere.

Thanks for this. I have been holding off trying to root my Tablet until I had some clear indication that there would be a "way back".
I will PM you a link to V8.2.3.9 US Firmware as soon as it's done uploading to MegaUpload (Aborted as someone beat me to it)

I haven't found a need to root my TF yet as all I need for it is running pretty smoothly.
My phone on the other hand gets flashed with a new ROM every few days.
Great to know that I can go back if I do root one day. Thx

I get to this point...
ianandamy said:
...let go and push up on the volume, which will load the factory recovery android with a box and a loading bar...
Click to expand...
Click to collapse
See the box with a loading bar for about three seconds then the screen switches to the image of the android robot logo and an exclamation point within a triangle. I think its because I accidentally wiped my data last night when I was trying to fix the boot loop issue. I'm about to give up on this one...
Edit: Hey it works great, just make sure you don't add a .zip extension to the E101_SDUPDATE rename.

Big Thanks to ianandamy this works great! Got it up and running. The only problem is that I am being prompted to enter a password in order to get it to the homescreen...The second problem is that I never had a security password in order to access the tablet. I have a feeling this has to do with it being rooted by the previous owner before I purchased the tablet. Would the settings return to how he customized it pre-root? If so the password the tablet is asking for would be the one he set before I ever owned the tablet. How do I get around this?!

worked great, and like the profile pic

Added to ultimate thread. Nice job.

isdnmatt said:
I don't have .12 for you, but here is a link to .9 (That's the one that really matters anyway right?). I would appreciate a link to .12 just for my OCD.
V8.2.3.9(US)
http://db.tt/EEElFqP
If you could please rehost it somewhere.
Click to expand...
Click to collapse
Can someone host it and pm me a link to post

It's also still on the website, even though its been removed from the support page.
http://dlcdnet.asus.com/pub/ASUS/EeePAD/TF101/UpdateLauncher_US_epad_user_8239.zip

isdnmatt said:
It's also still on the website, even though its been removed from the support page.
http://dlcdnet.asus.com/pub/ASUS/EeePAD/TF101/UpdateLauncher_US_epad_user_8239.zip
Click to expand...
Click to collapse
GREAT!
I've extrapolated the WW version with that http://dlcdnet.asus.com/pub/ASUS/EeePAD/TF101/UpdateLauncher_WW_epad_user_8239.zip

This cool and all.. but what would really be nice is to have the stock recovery yanked out of that 500MB blob so we don't have to transfer 500MB around, instead maybe 8-10MB (guessing based on CWM blob).
I'd do it, but I'm lame and don't have a linux box or VM setup .. that and I sold my eeePad to pay for vet bills... something about 'daddy save the puppy' is haunting me now.
P.S. Thanks for the info, just trying to save time if this is possible

sirmx said:
This cool and all.. but what would really be nice is to have the stock recovery yanked out of that 500MB blob so we don't have to transfer 500MB around, instead maybe 8-10MB (guessing based on CWM blob).
Click to expand...
Click to collapse
There you go. I extracted the recovery.img from the stock 8.2.3.9 US blob and put it into a clockwork flashable package. Tested it on Prime 1.3r2
After flashing this you should be able to use ASUS firmware packages again, but ymmv.

Segnaro said:
There you go. I extracted the recovery.img from the stock 8.2.3.9 US blob and put it into a clockwork flashable package. Tested it on Prime 1.3r2
After flashing this you should be able to use ASUS firmware packages again, but ymmv.
Click to expand...
Click to collapse
Mind explaining what exactly this is going to allow me to do? I flash it, then do what with the original firmware? And in doing this would it be a more complete restore back to stock removing everything related to root/cwm/custom boot and so on?
Either or, appreciate the work, you guys are awesome!

StirCwazy said:
Mind explaining what exactly this is going to allow me to do? I flash it, then do what with the original firmware? And in doing this would it be a more complete restore back to stock removing everything related to root/cwm/custom boot and so on?
Either or, appreciate the work, you guys are awesome!
Click to expand...
Click to collapse
After flashing it, you take the ASUS folder from the original firmware and put it on your SD card. The Transformer will ask you if you want to install that firmware.
Now that clockwork recovery has been replaced by stock recovery, it should be able to install normally.
I went from Prime 1.3r2 back to unrooted stock 8.2.3.9, no problem.

Segnaro said:
After flashing it, you take the ASUS folder from the original firmware and put it on your SD card. The Transformer will ask you if you want to install that firmware.
Now that clockwork recovery has been replaced by stock recovery, it should be able to install normally.
I went from Prime 1.3r2 back to unrooted stock 8.2.3.9, no problem.
Click to expand...
Click to collapse
Sorry to be a bit pesky here, but just want to be real sure: Based on ROM work I've done on my Android phone, unrooting is not the same as going back to a stock ROM. Actually the reverse is true: you can apply a stock ROM< and it will effectively unroot the phone.
So, if we have put PRIME on (or other ROMS...I think there is another...), then do this process, the phone will be stock, and in shape to send in for warranty if necessary?

ewingr said:
So, if we have put PRIME on (or other ROMS...I think there is another...), then do this process, the phone will be stock, and in shape to send in for warranty if necessary?
Click to expand...
Click to collapse
Yes, and after a factory reset it would be like when you just took it out of the box.

Will this un-root process work for the HC 3.1 leak? And if not what modifications would need to be done to unroot from HC 3.1? Am I able to wipe data/cache/dalvik from CWM then install HC 3.0.1 (Prime) so I can then follow this unroot process?
Edit: I found my answer in another thread. I'll post the link because I think it might be helpful to others with the same question.
http://forum.xda-developers.com/showthread.php?t=1103147

b1ackplague said:
Will this un-root process work for the HC 3.1 leak? And if not what modifications would need to be done to unroot from HC 3.1? Am I able to wipe data/cache/dalvik from CWM then install HC 3.0.1 (Prime) so I can then follow this unroot process?
Edit: I found my answer in another thread. I'll post the link because I think it might be helpful to others with the same question.
http://forum.xda-developers.com/showthread.php?t=1103147
Click to expand...
Click to collapse
Yes, I went from 3.1 direct to .9 without any issue.

Unbricked TF101, but no Updates?

Hey,
My TF101 got bricked by a simple reboot - "encryption unsuccessful" splash screen.
I used the nvflash-package from the devel-section "[Tool] Nvflash unbricking released!" for getting back a fresh, clean install of 3.2.1, which seems to work well.
Sadly, no OTA-Update to ICS is found and no microSD-Update is recognized.
Wipe, another cold-boot tried.
Q:
nvflash repartition and format - thus there couldn't be hassle with my old "broken" Android, right?
Q2:Anyone has an idea why updates dont work? Within the thread mentioned above I found some posts about updates which where recognized.
Searched a lot but nothing specific to the nvflash image solution...
BR / Adarof

NvFlash the RougeXM touch recovery CWM and use that to flash a new ICS firmmware/ROM. That's probably the easiest route to take. You can flash total stock that overwrites the custom recovery if you'd like too. Should fix your ota problem too.

removed

Okay, I have flashed ww-9.2.1.11-CWM-full-rooted.zip.
Wipeing everything tried.
But still no updates...
I found http://forum.xda-developers.com/showthread.php?t=1655976, which are the same log-entries like I found
But no luck on googling further on

If you have anything but a stock recovery, you will not get an OTA. You need to here to get the stock recovery and flash it through CWR. Then when you boot to recovery, using the power+vol down wait to see the text at top right corner and then hit volume up, method, you'll see an android laying on his back with a ! above him. This is stock recovery. Should be able to push OTA through settings after this.

Wohu - Thanks, thats one of the very gernal infos I missed :-/
I tried your mentioned tutorial. The process itself seems to be fine.
But...still no updates (it takes ages for the 1st update-check and is very fast for the 2nd and ongoing checks)
I'm from Germany, thus I would expect to require a firmware and recoveryimage for DE but the tutorial just links a WW for firmware and just US for reecovery?
Well ... DE has gone to WW since .21, thus I tried ... but the process uses a repacked Android3, thus I should care about DE ?
Might this be the reason? Is there a repacked-CWM-enabled firmware-image with recovery for DE?
Thanks again so far!
BR / Adarof

adarof said:
Wohu - Thanks, thats one of the very gernal infos I missed :-/
I tried your mentioned tutorial. The process itself seems to be fine.
But...still no updates (it takes ages for the 1st update-check and is very fast for the 2nd and ongoing checks)
Click to expand...
Click to collapse
When the file goes to update, it will fail if there are any apps missing from /system/app that ASUS put in there. There is a checker that looks for these app. If you deleted any of these or any were deleted in the CWR version you flashed earlier, you'll have to replace them before the update will install.
adarof said:
I'm from Germany, thus I would expect to require a firmware and recoveryimage for DE but the tutorial just links a WW for firmware and just US for reecovery?
Click to expand...
Click to collapse
All you need from that link I posted above is the SURecovery image and nothing else. You can get the firmware.zips from Asus directly. The SURecovery is universal, meaning it will work no matter what region you are in. It is the ROM/Blobs that are region specific. Don't forget that if you download one from the Asus site, that you need to extract it first and then push the zip that was inside the original file you downloaded.
So it would look like this WW.zip->extract->firmware.zip<<<---This is your ROM
adarof said:
Well ... DE has gone to WW since .21, thus I tried ... but the process uses a repacked Android3, thus I should care about DE ?
Might this be the reason? Is there a repacked-CWM-enabled firmware-image with recovery for DE?
Click to expand...
Click to collapse
Not sure about these questions.

Woodrube said:
When the file goes to update, it will fail if there are any apps missing from /system/app that ASUS put in there. There is a checker that looks for these app. If you deleted any of these or any were deleted in the CWR version you flashed earlier, you'll have to replace them before the update will install.
Click to expand...
Click to collapse
Okay, I havent known this either...
Is there a list of asus-default installed apps? I havent found :/
Woodrube said:
All you need from that link I posted above is the SURecovery image and nothing else.
You can get the firmware.zips from Asus directly.
Click to expand...
Click to collapse
SURecoverty means the USRecovery.zip, right?
So, in summarize
1) Rogue XM Touch recovery via nvflash from http://forum.xda-developers.com/showthread.php?t=1446019
2) Use RogueXM to flash original asus-firmware (decompressed download archive)
3) Use RogueXM to flash USRecovery.zip from http://theunlockr.com/2011/11/28/how-to-unroot-and-remove-cwm-recovery-on-asus-transformer/
Am I right?
...on 2) I get
Code:
assert failed: write_raw_image("/tmp/blob","staging")
E: Error in /sdcard/WW_epad-user-9.2.1.24.zip
(Status 7)
Installation aborted.
...but I could install the repacked-8.2.3.13_WW+root-CWR-update(su_removed).zip.
I assume the RogueXM requires a blob-File within the zip, which is not provided by asus-original-downloads?
A bit confused ;-)
BR / Adarof

adarof said:
Okay, I havent known this either...
Is there a list of asus-default installed apps? I havent found :/
Click to expand...
Click to collapse
That is a tough one. i would suggest looking at the OP's for the custom ROMs and see if the have an Add-on pack that will put them in their custom ROMs. That way you'll be able to extract the apps from them and push to /system/app on your own (don't forget to set permissions also on the ones you push). If not, I will see if I can pull them from mine, zip them up and them send a link to you, but that won't be until I 1 get home and 2 get some time which unfortunately won't be tonight.
adarof said:
SURecoverty means the USRecovery.zip, right?
Click to expand...
Click to collapse
Yes sorry about that. I was typing too fast. :/
adarof said:
Am I right?
...on 2) I get
Code:
assert failed: write_raw_image("/tmp/blob","staging")
E: Error in /sdcard/WW_epad-user-9.2.1.24.zip
(Status 7)
Installation aborted.
Click to expand...
Click to collapse
This is the 3rd Status 7 I have seen today from someone. The other two were in my phone forums and it is bc of a mismatched CWR version. In my phone forum, they just needed to flash a different kernel. Not sure what is going on with it here, but see below...
adarof said:
...but I could install the repacked-8.2.3.13_WW+root-CWR-update(su_removed).zip.
Click to expand...
Click to collapse
If you can get this far, then NVflash this and get it to boot up completely. That way you shoudl have all the /system/apps anyways. You can root it (if you lose it somehow) with Razerclaw since it is HC.13 (if you accidentally update all the way to ICS .11 without rooting, you can use ViperMod or any of the other root tools out there) Remember that once you root it, you can use OTA Rootkeeper to preserve your Root status, accept the OTA and then restore Root (this is what I have done since HC). Then install this app and flash the USRecovery.zip and you should be good to go. Reboot to full boot up and then try to reboot into recovery using Key Combo. It should throw the Android on his back with ! above him.
I would then uninstall the Recovery Installer to make sure you don't accidentally hit it and you are back where you started. But you'll have the APK to reinstall whenever you want later on.
Sorry for the long post, just trying to cover everything bc I have log out for a bit and won't be on until later on. Maybe Thing O Doom will swing through, though.
Edit::: Check this out too.

Woodrube said:
That is a tough one. i would suggest looking at the OP's for the custom ROMs and see if the have an Add-on pack that will put them in their custom ROMs.
Click to expand...
Click to collapse
Well, Ok...since I "just" would like to have back a real stock system, with OTA - there should be another way ;-)
Woodrube said:
This is the 3rd Status 7 I have seen today from someone. The other two were in my phone forums and it is bc of a mismatched CWR version. In my phone forum, they just needed to flash a different kernel. Not sure what is going on with it here, but see below...
Click to expand...
Click to collapse
Okay! This explains why I cant find any 1000000 hits on google related to my prop, which seems to me rather "simple" in principle ;-)
Woodrube said:
If you can get this far, then NVflash this and get it to boot up completely. That way you shoudl have all the /system/apps anyways.
Click to expand...
Click to collapse
Agreed...apps should be there. But even the Asus storage app was missing? Thus no stock-apps included?
Its an old Andoroid 3.0.1 and it wouldn't find OTA updates - thats correct?
Woodrube said:
Then install this app and flash the USRecovery.zip and you should be good to go. Reboot to full boot up and then try to reboot into recovery using Key Combo. It should throw the Android on his back with ! above him.
Click to expand...
Click to collapse
Okay, while Power-VolDown -> VolUp (this gave me Rogue XM before but since I installed USRecovery it was overwritten, right?) -> a Droid on its back with a "!" comes up.
...and now?
The .24 update on SDCard is recognized but when I try to install the knocked-out droid with "!" comes on reboot again and next reboot yields to a popup "failed update, reverted to old system" or so.
Woodrube said:
Sorry for the long post, just trying to cover everything bc I have log out for a bit and won't be on until later on. Maybe Thing O Doom will swing through, though.
Click to expand...
Click to collapse
THANKS for your time so far and dont stress anything
I really appriciate it! Im feeling lost on android...even I work with Linux/Unices since a decade or so :-/
Woodrube said:
Edit::: Check this out too.
Click to expand...
Click to collapse
Thats a Win-solution :-/
Most propably I need a stock DE .21 or WW .24 , repacked for flashing with CWM ... right? But that doesnt exists?!?! Cant imagine...
BR - Adarof!

Im still on this problem and have no idea - searched a lot, but havent found any real howtos for DE-tf101 for unbricking.
So my main thoughts are about this Error7, which is really ...strange.
I could flash the repacked, which is available for .11. But I dont have a change to get anz further...
I SHOULD be able to flash a original asus stock Firmware with the Rogue XM Touch recovery, right?
Since Im not able to ... should I try an older version of Rogue XM?
BTW: Is the region info somewhat hard-wired thus it couldnt be changed?
BR - Adarof

There's a WW .24 available for tf101 and I'm making a 9.2.2.6 for the Tf101G,
so there is the latest FW available.

If you are flashing, then that means you have a custom recovery. That is why no OTA.
I'm mobile now but IIRC from before, you flash a working CWR version of the ROM. Thne boot up. Then flash the stock recovery. Then you should be able to OTA after that.
Just make sure whatever ROM you flash is full. If you can nvflash that would be better and then put stock recovery in after your first boot.

Thanks to both of you!
@Woodrube: Flashing means using RogueXM...
Summary:
1) Rogue could flash me either CWR/rooted images or the repacked one - both without OTA.
Just RogueXM is left as bootloader, which shouldnt prevent OTA?!
2) Rogue gives Error7 on flashing the asus-downloaded-onetime-depacked-firmwares, doesnt matter if the DE.21 or current WW.24. :-/
Trying to make the long story short:
For comming back to a "known" system I would like to really go back to a stock system.
I conclude that using nvflash would be the best for this, right?
But where do I get the img-Files for flashing using nvflash?
I just found one package which included a download.sh: It repartitioned, formated and installed a WW android3 (3.2.1) version and deleted the RogueXM. It mentioned its a stock firmware (thus should have all apps).
Sadly no updates afterwards...
I think it could be since its the WW version and I would need a WW .21/.24 (since 21/24 dont distinguish DE and WW anymore) or an older DE-version. But for nvflash I need the img files of these firmwares, which I dont find. ...
Maybe you could simply point me to such img files for nvflash, please?
BR / Adarof

Finally I managed to borrow a win pc and thus could give EasyTool of your posting #8 a try: http://forum.xda-developers.com/showthread.php?t=1688012
After some hassle with the driver I managed to flash asus stock download DE_epad-user-9.2.1.21, which is "DE_Special" for coming to WW of german tf101s. the tf was wiped and boots just fine - it states that it has
IML74L.WW_epad9.2.1.21-20120413 - as I think is fine.
Sadly no update again:
The OTA doesnt find any.
The microSD recognizes WW_epad-user-9.2.1.24.zip, but during rebooting I get the Droid with ! and after another reboot a popup with something like "update failed (12)" (in german Systemaktuallisierung fehlgeschlagen (12)). It mentiones that the new version in not compatible ...but ....the .24 is for the DE_special .21 the next ... ?!
I could flash the .24 using Easytool, but this would mean to loose always all data for an update ....
Installing rogue still gives error7 on flashing stock (once decompressed) .zip

I've been reading and Rouge gives errors with stock otas X.x
You can manually install the stock blobs with adb shell, but they will overwrite recovery and etc..
If you want total stock you need to NvFlash, and for whatever reason your tf does NOT like updates.
Rouge V1.3 will take otas, if you don't mind the downgrade.

Thanks for the hint - but I was to lazs to install the rogue 1.3.
I found a .zip, which I tried to install by Rogue 1.5 hoping for a downgrade overall, but during installation it stated "Returning to recovery" and still 1.5 was installed .
What I finally found is a ww-9.2.1.21-to-9.2.1.24-CWM-v1.0.zip image.
I installed this using rogue 1.5 and got a clean .24 installation.
So I'm using this installation hopeing either
1) OTA will work, if asus releases .24++ or
2) I find an ww-9.2.1.24-to-9.2.1.24++
Still I dont get why the EasyTool .21 installation yields to a non-OTA state ... but ...
So, THANKS all of you for your support and hints!
I'll come back here and report further on, if .24++ is out
BR / Adarof

bad luck
....meanwhile my tf101 has started to ignored the dock battery, while the keyboard still works. I tried cleaning ....no luck, the dock battery does not come up within the menues ...
Thus it was returned and I'm waiting for repairing or refunding ...
BR / Adarof

[ROOT] PROPER Remake of Full Rooted Stock Image (aka Root66) + Easy CWM Install

SOLVED - How to flash the Proper (Fixed) Stock Rooted Image
Description: This is 100% stock with just Superuser/su added and overwrites every partition to stock but keeps your personal data, apps, settings the same (just like the stock factory image).
Samsung Official USB Drivers - Link
ODIN v3.07 - Link
Proper Rooted Stock Image - Download or (Torrent Link) - MD5 = be4350a56e739eaf7a4184352d653a7b
1. Install USB drivers
2. Download ODIN v3.07
3. Backup your data
4. OPTIONAL: Do a factory reset (highly recommended if you have issues with your current ROM)
***WARNING: Step #4 will erase internal storage but not microSD card***
5. Download the above Proper Rooted Stock Image file and extract the tar file from inside it
6. Boot phone into ODIN mode (See here for how-to)
7. Flash the extracted tar file using ODIN v3.07
You should now have a like new condition stock image and rooted with all issues resolved.
Credit goes completely to mrRobinson for creating this image for us. Thank you sir. (Original Post) + (Details How It Was Made)
To Install Official CWM Recovery
1. After following above process, download "Rom Manager" from the Play Store
2. Open Rom Manager
3. Select "Flash ClockworkMod Recovery"
4. Select "Samsung Galaxy S3 (Verizon)" down at the bottom and let it flash
5. Once completed you can reboot to CWM by selecting "Reboot into Recovery" from Rom Manager
ORIGINAL REQUEST
After various testing, it seems many users are experiencing various issues with the rooted System.img provided by the OP in this thread. Many report findings of "Sprint related elements" as well as various keyboard issues and things not working as they should. I wish I had the knowledge myself but on behalf of the community, I'd like to request for someone with knowledge of this guide to remake the same rooted system.img as in the original but this time confirmed with using the original stock Verizon SCH-I535 image downloadable here.
I'm sure many of us here would highly appreciate this effort and we can also carry out further testing as many users reported that soon as they flash back to that stock image, their issues have disappeared and everything starts working properly.
I will quote another user in reference to this:
BungeBash said:
Just formatted back to stock until issues can be resolved. The stock image (which I'm told this root is + su) lost all Sprint instances and any strange extra options. Also the Keyboards are back to functioning. Not to be a conspiracy theorist, but I feel that the root image has more going on with it than what we are told.
Click to expand...
Click to collapse
Here's to hoping one of you knowledgeable developers are able to assist us with this request.
Click to expand...
Click to collapse

open1your1eyes0 said:
After various testing, it seems many users are experiencing various issues with the rooted System.img provided by the OP in this thread. Many report findings of "Sprint related elements" as well as various keyboard issues and things not working as they should. I wish I had the knowledge myself but on behalf of the community, I'd like to request for someone with knowledge of this guide to remake the same rooted system.img as in the original but this time confirmed with using the original stock Verizon SCH-I535 image downloadable here.
I'm sure many of us here would highly appreciate this effort and we can also carry out further testing as many users reported that soon as they flash back to that stock image, their issues have disappeared and everything starts working properly.
I will quote another user in reference to this:
Here's to hoping one of you knowledgeable developers are able to assist us with this request.
Click to expand...
Click to collapse
If you don't like it, dont flash it.

tonu42 said:
If you don't like it, dont flash it.
Click to expand...
Click to collapse
Hardly helpful for those who already flashed it... I just want it fixed, or a work around. If it's something as simple as uninstalling a few things, or replacing some databases, I'm fine with that. I just don't want to redo everything, and re-restore everything with Titanium Backup.

tonu42 said:
If you don't like it, dont flash it.
Click to expand...
Click to collapse
Not to be rude but we're not. That's why I'm making this request to remake with proper image. Because we are skeptical of the original one that was made. I PMed the OP of that thread and he claims to have used that image but in user's experience something is definitely different from stock, hence we're requesting a remake to test this.

open1your1eyes0 said:
Not to be rude but we're not. That's why I'm making this request to remake with proper image. Because we are skeptical of the original one that was made. I PMed the OP of that thread and he claims to have used that image but in user's experience something is definitely different from stock, hence we're requesting a remake to test this.
Click to expand...
Click to collapse
If you'd like, you can flash the stripped version, and I have a second zip that will restore all the stripped apps.

I did have some odd issues with SwiftKey crashing after flashing the image. Not sure if that has to do with it or not.
tonu42 said:
If you don't like it, dont flash it.
Click to expand...
Click to collapse
Useless post.
What would be useful is someone with the requisite knowledge being able to remake this exploit with the Verizon source in order to have maximum compatibility.

open1your1eyes0 said:
After various testing, it seems many users are experiencing various issues with the rooted System.img provided by the OP in this thread. Many report findings of "Sprint related elements" as well as various keyboard issues and things not working as they should. I wish I had the knowledge myself but on behalf of the community, I'd like to request for someone with knowledge of this guide to remake the same rooted system.img as in the original but this time confirmed with using the original stock Verizon SCH-I535 image downloadable here.
I'm sure many of us here would highly appreciate this effort and we can also carry out further testing as many users reported that soon as they flash back to that stock image, their issues have disappeared and everything starts working properly.
I will quote another user in reference to this:
Here's to hoping one of you knowledgeable developers are able to assist us with this request.
Click to expand...
Click to collapse
Are you talking about the system.img from invisibleks first image?
Link: http://forum.xda-developers.com/showpost.php?p=28402010&postcount=1
Or the stripped and rooted one?
Link: http://forum.xda-developers.com/showpost.php?p=28459565&postcount=1
I think the first one invisiblek made is pretty much what you are asking for. Remember, there's no SCH-I535 source code out there for people to build a system image from. These images are hacked system images from the stock image (found here: http://samsung-updates.com/device/?id=SCH-I535 ). One can't really "remake" the system image until we can fully bypass the encrypted and locked bootloader.
If you want to roll your own system image with the su binary and SuperUser you can follow the instructions here:
http://forum.xda-developers.com/showpost.php?p=27801304&postcount=1
They seem pretty straight forward.
However, I'm pretty sure that's what invisiblek did for his/her first rooted image (the one that isn't stripped).
Hope that helps. I can't do much of anything till my SGS3 arrives tomorrow.
ALQI

alquimista said:
Are you talking about the system.img from invisibleks first image?
Link: http://forum.xda-developers.com/showpost.php?p=28402010&postcount=1
Or the stripped and rooted one?
Link: http://forum.xda-developers.com/showpost.php?p=28459565&postcount=1
I think the first one invisiblek made is pretty much what you are asking for. Remember, there's no SCH-I535 source code out there for people to build a system image from. These images are hacked system images from the stock image (found here: http://samsung-updates.com/device/?id=SCH-I535 ). One can't really "remake" the system image until we can fully bypass the encrypted and locked bootloader.
If you want to roll your own system image with the su binary and SuperUser you can follow the instructions here:
http://forum.xda-developers.com/showpost.php?p=27801304&postcount=1
They seem pretty straight forward.
However, I'm pretty sure that's what invisiblek did for his/her first rooted image (the one that isn't stripped).
Hope that helps. I can't do much of anything till my SGS3 arrives tomorrow.
ALQI
Click to expand...
Click to collapse
The one in bold is what this request is about actually. Basically to remake that. Because the non-stripped rooted system.img that invisiblek is the one causing most issues for people and people have noted things in there that are not in the factory image. I tried to follow that guide myself but I must be missing something because most of those commands do not work for me. Mind you this is on a Windows PC.

I could do it, but it'd require more time than whats it worth. Sorry.

tonu42 said:
If you don't like it, dont flash it.
Click to expand...
Click to collapse
You are a WORM!!!!!!!
Sent from my Galaxy Nexus using xda app-developers app

tonu42 said:
I could do it, but it'd require more time than whats it worth. Sorry.
Click to expand...
Click to collapse
No worries. Very understandable as that guide is quite time consuming and not for everyone. Thanks for your support either way.

tonu42 said:
If you don't like it, dont flash it.
Click to expand...
Click to collapse
tonu42 said:
I could do it, but it'd require more time than whats it worth. Sorry.
Click to expand...
Click to collapse
Two completely pointless comments.
open1your1eyes0 said:
No worries. Very understandable as that guide is quite time consuming and not for everyone. Thanks for your support either way.
Click to expand...
Click to collapse
You sir are a better man than me for being so humble in response to these replies.
I'm assuming invisiblek DID in fact use the VZW image if the phone still had all the VZW nonsense in it (VZ Navigator, for example) as that would not be found in the Sprint image. Equally, if "all" he did was follow the steps in the link, then someone else doing the same is likely to produce the same result.
tonu42 said:
If you'd like, you can flash the stripped version, and I have a second zip that will restore all the stripped apps.
Click to expand...
Click to collapse
If you have these, have you posted them anywhere? That might have been a useful thing to do.

Here is all the removed apk's in a CWR zip.
http://www.mediafire.com/?6jv8wn9l5n0li9y

I actually saw that guide you posted about creating our own. I can try and whip something up tonight if I get some time. If not, tomorrow is my "Friday" at work, so I'll have time tomorrow evening for sure.

BungeBash said:
I actually saw that guide you posted about creating our own. I can try and whip something up tonight if I get some time. If not, tomorrow is my "Friday" at work, so I'll have time tomorrow evening for sure.
Click to expand...
Click to collapse
Thank you much sir. You assistance would be greatly appreciated.
Unfortunately I do not have a linux box so the guide does not work for me.

It's already been diff'd. There is no difference between the stock image and the rooted one here except for su and binaries:
http://rootzwiki.com/topic/29256-ro...erizon-galaxy-s-iii/page__st__110#entry793038
I'm guessing VZW has done more to the stock image on the phone than the stock one that is available for download, which is causing these differences.

Goose306 said:
It's already been diff'd. There is no difference between the stock image and the rooted one here except for su and binaries:
http://rootzwiki.com/topic/29256-ro...erizon-galaxy-s-iii/page__st__110#entry793038
I'm guessing VZW has done more to the stock image on the phone than the stock one that is available for download, which is causing these differences.
Click to expand...
Click to collapse
Considering I loaded the first root mod, then reverted to the image that it was created from and have 2 different setups I'd say two different files were used.

open1your1eyes0 said:
The one in bold is what this request is about actually. Basically to remake that. Because the non-stripped rooted system.img that invisiblek is the one causing most issues for people and people have noted things in there that are not in the factory image. I tried to follow that guide myself but I must be missing something because most of those commands do not work for me. Mind you this is on a Windows PC.
Click to expand...
Click to collapse
If its already been diff'd with the original, maybe the sammy-updates file ain't so good.
Hmm, I wonder if we dump the system.img from an untouched stock phone (like the one I get tomorrow), and inject that img with su, would that work out any better? I'll look into this tomorrow.
I'll also take a look at re-rolling the system.img from the sammy-updates files in the meantime.
I'll report back when and if I have a viable image.
~ALQI

alquimista said:
If its already been diff'd with the original, maybe the sammy-updates file ain't so good.
Hmm, I wonder if we dump the system.img from an untouched stock phone (like the one I get tomorrow), and inject that img with su, would that work out any better? I'll look into this tomorrow.
I'll also take a look at re-rolling the system.img from the sammy-updates files in the meantime.
I'll report back when and if I have a viable image.
~ALQI
Click to expand...
Click to collapse
According to users, flashing that sammy-update firmware got rid of all the issues and the Sprint related stuff. Just, FYI.

If anyone is up for the remake, you might want to try making it out of this one. Not sure if it's any different but it's from another well known Samsung firmware site.
Link to stock factory firmware