Related
i flashed SCH-I500_USCC_DI14_REL.tar.md5。When I use odin Installation cmw ，the phone stopped at the samsung splash screen does not work. How can I do?
qq25 said:
i flashed SCH-I500_USCC_DI14_REL.tar.md5。When I use odin Installation cmw ，the phone stopped at the samsung splash screen does not work. How can I do?
Click to expand...
Click to collapse
You also need to flash the pit file. If you follow the instructions in this thread, it will tell you exactly what to do. You don't use Odin to install CWM, btw.
Phidelt82 is correct.
Start with that thread. That will get you back to stock.
Then this thread. How to Mod My MEZ. That will get you started from Stock to get Rooted and install CWM and then its your choice of ROM and Theme if you choose.
please please please.. read. read and read everything twice. go slow and have patience.
And ask questions. I do not get a chance to post so much at the moment but always willing to help where I can if I can.
now my phone can not to work。I press step by step, and now my phone finish except call 911, any other phone cannot dial, what reason be?
Need to activate？How should do?
qq25 said:
Need to activate？How should do?
Click to expand...
Click to collapse
Just cool down. Your phone is booting. It works. I don't work for USCC so I'm not exactly sure how it works but I don't know if you would have to activate it again. I suggest you take the phone to the store and tell them it stopped working. They will probably get it all fixed up for you there. Since it's stock right now you shouldn't have any problems (=
PS: In the future, don't dial 911 to 'test' whether you phone works or not.. 0_o
dcow90 said:
Just cool down. Your phone is booting. It works. I don't work for USCC so I'm not exactly sure how it works but I don't know if you would have to activate it again. I suggest you take the phone to the store and tell them it stopped working. They will probably get it all fixed up for you there. Since it's stock right now you shouldn't have any problems (=
PS: In the future, don't dial 911 to 'test' whether you phone works or not.. 0_o
Click to expand...
Click to collapse
thanks ,i use this phone in china ^_^ 。
qq25 said:
thanks ,i use this phone in china ^_^ 。
Click to expand...
Click to collapse
Why would you be using a US Cellular phone in China?
phidelt82 said:
You also need to flash the pit file. If you follow the instructions in this thread, it will tell you exactly what to do. You don't use Odin to install CWM, btw.
Click to expand...
Click to collapse
Woah, what do you mean you don't use Odin to install CWM? The newb guide
http://forum.xda-developers.com/showthread.php?t=931169
says "
1.Shut phone off, pull battery out and leave it out.
2.Run odin (assuming you have it installed)
3.Load the cwm-recovery-all.tar file into the PDA spot"
And i've read like 15 other how tos that all say the same thing. That sounds like you install CWM with odin.
Hello guys,
I just got my Samsung Galaxy Tab 2 7.0 and wanted to mess around with it and root it. I thought I did everything correctly - it won't let me post the site I used .
However, now I am in a pickle. Whenever I start my SGT, it gets to the Samsung loading screen, does the intro tune, and then just starts all over again. I tried doing a hard reset and I tried wiping all of the cache/saved files/etc. but nothing seems to work. I am at a loss as to what I can do. Has anyone seen this before or is there a way around it? Is there anything I can do?
Much Appreciated,
Sam
royalmessup said:
Hello guys,
I just got my Samsung Galaxy Tab 2 7.0 and wanted to mess around with it and root it. I thought I did everything correctly - it won't let me post the site I used .
However, now I am in a pickle. Whenever I start my SGT, it gets to the Samsung loading screen, does the intro tune, and then just starts all over again. I tried doing a hard reset and I tried wiping all of the cache/saved files/etc. but nothing seems to work. I am at a loss as to what I can do. Has anyone seen this before or is there a way around it? Is there anything I can do?
Much Appreciated,
Sam
Click to expand...
Click to collapse
What os did you flash? Can you boot to recovery and flash something more stable like CM9 with odin?
Gamer819 said:
What os did you flash? Can you boot to recovery and flash something more stable like CM9 with odin?
Click to expand...
Click to collapse
I am not entirely too sure, to be honest - I wish it would be let me post the site I used haha.
I used the below ClockworkMod Recovery:
imnuts’ CWM Recovery image
I downloaded the developer nycbjr’s rooting package - cwm-root-gtab2.zip
Does that answer your question?
Kinda. Did you just want root or a custom firmware as well? I am am running the CM9 and I'm very pleased with it. :good: Not as flashy as the stock but it is a performer.
Gamer819 said:
Kinda. Did you just want root or a custom firmware as well? I am am running the CM9 and I'm very pleased with it. :good: Not as flashy as the stock but it is a performer.
Click to expand...
Click to collapse
Honestly, I am not even 100% sure why I did it. I was browsing the Android Market and got some apps I liked. The issue arose when I tried using them it requested that I have root powers - I wasn't really trying to modify the os or anything like but was just looking to get root powers. If I hook up my phone to my laptop and put it into Recovery Mode and run Odin, can I PDA the CM9? Do you think that would help? Is there anyway to reset it through Odin? When I do a hard reset, literally nothing changes.
Please post the link to the root method you used. I have a hunch you tried to flash a zip for the gtab 10.1.
MultipleMonomials said:
Please post the link to the root method you used. I have a hunch you tried to flash a zip for the gtab 10.1.
Click to expand...
Click to collapse
The below is the root zip I used: cwm-root-gtab2.zip
mediafire.com/?kjb0rg9bs87p2ma
It won't let me post the site I used so I am going to break it up into a few strings.
androidauthority. com/ galaxy-tab-2-7-0-p3113-root-clockworkmod-recovery-96474/
I meant the root guide you used.
MultipleMonomials said:
I meant the root guide you used.
Click to expand...
Click to collapse
Yea, I can't post links in the forum yet, so... . The link above(broken up one), the android authority one, is where I found the root guide.
Can you access CWM recovery? BTW, you can post links if you uncheck "automatically parse links". Also, you don't have to email me, PM me, AND post here-- one of those will suffice.
MultipleMonomials said:
Can you access CWM recovery? BTW, you can post links if you uncheck "automatically parse links". Also, you don't have to email me, PM me, AND post here-- one of those will suffice.
Click to expand...
Click to collapse
I can access CWM recovery. However, none of the options in there seem to really do anything.
Edit: Yea, my apologies on that. I was trying to e-mail you the link and I didn't get a sent confirmation and it said I had nothing in my sent messages so I tried PMing you and the same thing happened. I'll stick to the forums so everyone can see this as it may help people, I just didn't know there was a way around the link . My bad.
It's fine. Back to work, what you call a soft bricked tab is what I call an opportunity to flash a new ROM. I'm a tab 10.1 guy so I can't recommend a specific ROM. But I've heard good things about Tab2Lite and CM9.
Sounds exactly like this problem.
http://forum.xda-developers.com/showthread.php?t=1809239
Won't boot. Bootloader or kernel problem?
Sent from my GT-P3113 using Tapatalk 2
MultipleMonomials said:
It's fine. Back to work, what you call a soft bricked tab is what I call an opportunity to flash a new ROM. I'm a tab 10.1 guy so I can't recommend a specific ROM. But I've heard good things about Tab2Lite and CM9.
Click to expand...
Click to collapse
I'm glad to hear there is a chance my birthday day present won't become a paper weight. I am still a little new to this stuff so I wanna make sure I am on the same page as you. The ROM that I used was cwm-root-gtab2, correct? I had to download a bunch of files and I am trying to make sense out of what is what. Now, when you said I need to get a new ROM, would that consist of me putting a new ROM on the external SD and then running that?
royalmessup said:
I'm glad to hear there is a chance my birthday day present won't become a paper weight. I am still a little new to this stuff so I wanna make sure I am on the same page as you. The ROM that I used was cwm-root-gtab2, correct? I had to download a bunch of files and I am trying to make sense out of what is what. Now, when you said I need to get a new ROM, would that consist of me putting a new ROM on the external SD and then running that?
Click to expand...
Click to collapse
Could one of you clear one thing up for me. I am going to try and use Odin again but with a different espresso file as I think that was the problem. I am just unsure which espresso file to use, how do I tell which one I need.
From:
http://rootzwiki.com/topic/25228-how-to-rooting-gt-p3113-step-by-step-updated-07182012/
Dralanmage said:
Sounds exactly like this problem.
http://forum.xda-developers.com/showthread.php?t=1809239
Won't boot. Bootloader or kernel problem?
Sent from my GT-P3113 using Tapatalk 2
Click to expand...
Click to collapse
Hey guys, I want to thank both of you for your help! I was able to reset my tab and it now works. It looks like I used the wrong espresso file . If possible, I would still love for an explanation of my above question - just so I know for the future. But other than that, thank you for both!
royalmessup said:
Hey guys, I want to thank both of you for your help! I was able to reset my tab and it now works. It looks like I used the wrong espresso file . If possible, I would still love for an explanation of my above question - just so I know for the future. But other than that, thank you for both!
Click to expand...
Click to collapse
Basically if your tab is on the latest firmware image, you need the latest espresso file. I'm guessing that you were on 4.0.4 and the espresso file you first flashed was for 4.0.3. That happened to myself and a few other people as it's not really clear what you need in those guides!
Sent from my Galaxy Nexus using Tapatalk 2
Currently designed for the Wifi version only. Alternates available upon request.
This package includes the de-odexed system and framework folder based on a wifi model.
This is NOT a full install, so do NOT wipe before using.
This package is designed to be used with the custom recovery image. This will NOT work with Odin.
This will delete the current system and framework folders and flash the new ones in their place. This is only a temporary solution until a full rooted install is established.
De-Odexed Install Pack
Custom Recovery Image
Custom Kernel Packages
twistedumbrella said:
Currently designed for the Wifi version only. Alternates available upon request.[/url]
Click to expand...
Click to collapse
Request!
My Verizon GC120 should be here in a couple of days. As far as I know it is untouched stock. Let me know the commands to pull the files you need for this and the other dev work you are doing.
Thank you for taking the time to do the work! We all appreciate it!
Finally received a GC120 camera I can do something with. Attached are the .img files pulled. About says my phone is on 4.1.2 (LK3) but I keep getting an install update request although the folder titled as the update in /cache is empty (so there's nothing I can pull from that).
I also pulled the modem.bin but it says invalid file when I try to upload.
*These are the files for LK3
Camera updated to LL2. Updated files attached.
MC4 files attached
So maybe I screwed myself updating all the way to MK4 update. Can't root using framaroot now like I did with all the others. Gonna try a few other options.
Can someone please tell me the adb command to find whether a bootloader is locked or not? I have tried several I've found online and don't receive anything conclusive. Thanks.
Be back in a week or so. Final project is in the beta test stage so I am swamped until it reaches the release candidate.
twistedumbrella said:
Be back in a week or so. Final project is in the beta test stage so I am swamped until it reaches the release candidate.
Click to expand...
Click to collapse
can you upload samsung galaxy camera apk
Can anyone post efs.img? I've screwed up my Cam and i need to flash efs.img to mmcblk03. Was playing around with swap and screwed up!
BUMP!!!!
rudie_techie said:
BUMP!!!!
Click to expand...
Click to collapse
? It wasn't part of the system image and you didn't specify which model but even so, I doubt people are randomly checking this thread for who needs backups of radio partitions.
Its a EK-GC100 bootloader mode says EK-GC100_EUR_XX
rudie_techie said:
Its a EK-GC100 bootloader mode says EK-GC100_EUR_XX
Click to expand...
Click to collapse
I dug through everything I have but no efs.img and if I remember right, you'd need one with your IMEI. Best bet is probably a factory reset.
Didn't help... tried factory reset with stock recovery and cwm recovery... nothing helps... i don't know a way to get it fixed... will keep looking...
Finally got it fixed. As GC100 is similar to S3, downloaded efs file for S3 flashed it via odin through bootloader and voila... attaching the file for reference if anyone else gets into trouble!
rudie_techie said:
Finally got it fixed. As GC100 is similar to S3, downloaded efs file for S3 flashed it via odin through bootloader and voila... attaching the file for reference if anyone else gets into trouble!
Click to expand...
Click to collapse
It's usually easier to post it all in one thread and link to it instead of making the same posts in two threads and ending up with the same answers.
can someone please re upload or send me links in private message? I have dropbox, please I need it... my ****z bricked gotta fix it
damn can someone upload these links or the stock odin tar???
GC120_GC120VRAMH2_1366980_REV00_user_low_ship.tar.md5
?? ANYONE please.... help
ON: Galaxy S3 4.4.2 Verizon(d2vzw) -->OK, I know you all may think I didn't read the other debrick threads, your wrong. I made this new thread because i HAVE tried endlessy every method of debrick on this forum and the internet, and no success. I was messing around with safestrap and decided to try and flash a rom called flashingdroid: for some reason. So i did as usual, boot into recovery(safestrap 3.75) and wipe current os and flash the new one. So i wiped my stock rom(after making a backup) and installed/flashed the new one(flashingdroid) and after seemingly a successful flash, i pressed reboot. Then it went downhill. One second after i pressed reboot, the screen flashed quickly, then shutoff, for good. I couldn't boot it or get into recovery or odin or ANYTHING. I tried the microsd method of debricking with minimal success. It will only give me one vibration, then black scree with that method. Nothing else has worked. I know this was a noob mistake somehow, but does anyone know any special tricks or something? Will a good jig maybe work? I have doubt verizon or samsung will accept it back(it was well rooted!). Please anything/anybody help! I really don't want to buy a new phone or jtag it. Thanks!:crying:
You may have read the debrick threads, but what you should have done from the beginning was read and pay attention to which forum you were in. You flashed a ROM for the International version of the S3 onto your Verizon S3. You almost certainly turned your phone into a shiny paper weight. JTAG may be your only hope. If you don't have one, check out mobiletechvideos.com. I'm not familiar enough with safestrap to know if that may have actually saved you since it is not a traditional recovery and I don't know if it touches all the partitions. In the future, research, research, and research, and pay very close attention to exactly what you are flashing onto your phone. For the Verizon S3, you should only flash ROMs from this sub-forum. And when using safestrap, you are restricted to only flashing ROMs with the same build number as what your phone is currently on in a stock condition.
Ok...Thanks
landshark68 said:
You may have read the debrick threads, but what you should have done from the beginning was read and pay attention to which forum you were in. You flashed a ROM for the International version of the S3 onto your Verizon S3. You almost certainly turned your phone into a shiny paper weight. JTAG may be your only hope. If you don't have one, check out mobiletechvideos.com. I'm not familiar enough with safestrap to know if that may have actually saved you since it is not a traditional recovery and I don't know if it touches all the partitions. In the future, research, research, and research, and pay very close attention to exactly what you are flashing onto your phone. For the Verizon S3, you should only flash ROMs from this sub-forum. And when using safestrap, you are restricted to only flashing ROMs with the same build number as what your phone is currently on in a stock condition.
Click to expand...
Click to collapse
Im kinda tired of my so confined locked bootloader and phone model anyways. Im going to purchase a $20 JTAG service off ebay, hope that works.
Root Wizard said:
Im kinda tired of my so confined locked bootloader and phone model anyways. Im going to purchase a $20 JTAG service off ebay, hope that works.
Click to expand...
Click to collapse
I'd be very careful with eBay, they tend to be junk. I've been an eBay member over 10 years and ran into a lot of it
Sent from my Nexus 5
Try MicroSD 16GB (2GB not work)
Confused About What's Possible for Modding a Stock Verizon S3
Can someone please steer me in the right direction? I have a Verizon Galaxy S3 running 4.4.2 stock. I recently rooted my phone, but I realize I am very limited as to any mods I can make due to the locked bootloader. Am I able to modify my OS in some way at all (Safestrap) to make my phone run better, or am I just too late in going about this? I've read so much on this subject, but the more I read, it seems the more confused I get. I want to be careful not to brick my phone and would love to see some precise directions on what I could do. Thanks a million for any help at all!
straykat said:
Can someone please steer me in the right direction? I have a Verizon Galaxy S3 running 4.4.2 stock. I recently rooted my phone, but I realize I am very limited as to any mods I can make due to the locked bootloader. Am I able to modify my OS in some way at all (Safestrap) to make my phone run better, or am I just too late in going about this? I've read so much on this subject, but the more I read, it seems the more confused I get. I want to be careful not to brick my phone and would love to see some precise directions on what I could do. Thanks a million for any help at all!
Click to expand...
Click to collapse
You should be able to install xposed but as far as mods your very limited to what you can do with it
Sent from my Nexus 5
ShapesBlue said:
You should be able to install xposed but as far as mods your very limited to what you can do with it
Sent from my Nexus 5
Click to expand...
Click to collapse
Hey, thanks a lot for that! As much as I've read, I've never heard of xposed. I'll research it and see what it takes and what it will do for my phone. If it helps at all, which I'm sure it will, that would be great. Thanks again for your reply!
straykat said:
Hey, thanks a lot for that! As much as I've read, I've never heard of xposed. I'll research it and see what it takes and what it will do for my phone. If it helps at all, which I'm sure it will, that would be great. Thanks again for your reply!
Click to expand...
Click to collapse
Your very welcome. That's what xda is all about. Helping others
Sent from my Nexus 5
XDA Forum - the best place for learning...
ShapesBlue said:
Your very welcome. That's what xda is all about. Helping others
Sent from my Nexus 5
Click to expand...
Click to collapse
ShapesBlue-
It's hard to compare this forum with the others. I believe the people here are the most knowledgeable and, like you, very helpful. Funny enough, or not, I posed a related question on another site (initials AC), and it took over 150 views and a week later before anybody offered a reply. Anyway, I can see there is lots of information on this forum about xposed, so now I'll go and learn as much as I can about it. Thanks again for your help!
Btw, here's a link for others like me who are clueless about xposed: http://forum.xda-developers.com/showthread.php?t=2299428
straykat said:
ShapesBlue-
It's hard to compare this forum with the others. I believe the people here are the most knowledgeable and, like you, very helpful. Funny enough, or not, I posed a related question on another site (initials AC), and it took over 150 views and a week later before anybody offered a reply. Anyway, I can see there is lots of information on this forum about xposed, so now I'll go and learn as much as I can about it. Thanks again for your help!
Btw, here's a link for others like me who are clueless about xposed: http://forum.xda-developers.com/showthread.php?t=2299428
Click to expand...
Click to collapse
I've been around the web going on nearly 20 years and I'd have to agree some are more helpful than others. I find xda to be a great resource for anything android or windows phone related. And yes I agree some are a lot more helpful than others. The guys and gals still lurking around the VZW S3 forums have been here since the beginning for this phone and even though mine is no longer active I still use it daily, mostly for games but will probably never give it up. It was my first true (I'm comparing it to the HTC thunderbolt) android phone
Sent from my Nexus 5
Can't Believe What I - did! - - - Need Help Rebooting Phone
ShapesBlue said:
I've been around the web going on nearly 20 years and I'd have to agree some are more helpful than others. I find xda to be a great resource for anything android or windows phone related. And yes I agree some are a lot more helpful than others. The guys and gals still lurking around the VZW S3 forums have been here since the beginning for this phone and even though mine is no longer active I still use it daily, mostly for games but will probably never give it up. It was my first true (I'm comparing it to the HTC thunderbolt) android phone
Sent from my Nexus 5
Click to expand...
Click to collapse
ShapesBlue-
I seem to have gotten into big trouble - I hope there's a solution. I learned all about Xposed and installed it along with about a dozen modules. Everything was working great, except the torch/flashlight... [I wanted that! ] so, I saw a download for a module on this forum to fix the flashlight... http://forum.xda-developers.com/xposed/modules/xposed-flashlight-fixer-fix-devices-t2867267 . Well, since doing that, I think I realized that I should have left the flashlight alone! When I tried to reboot after adding the module to xposed, I ended up in what i believe is a boot loop. The Samsung screen comes on, and then it gets stuck on the red Verizon screen. I never dreamed that a module installation could cause this; and I guess I figured if it ever happened I could get into recovery mode and restore everthing. Btw, I had done a complete backup of my phone using Titanium on my sd card.
So, here's what I can/can't do now. I can push "down-volume-button" + home + power to get to screen where you can download a cusom OS - then pushing volume-up-button goes to screen that says "Downloading...Do not turn off target!! (Nothing seems to happen from here.) - - - I cannot enter recovery mode by pressing "volume-up" + home + power keys. When I do that I get the big yellow triangle with message - System software not authorized...go to nearest Verizon store. hmmmm.... So, am I hard bricked or soft bricked? Do I have a way out? Thanks very much for any help with this!
straykat said:
ShapesBlue-
I seem to have gotten into big trouble - I hope there's a solution. I learned all about Xposed and installed it along with about a dozen modules. Everything was working great, except the torch/flashlight... [I wanted that! ] so, I saw a download for a module on this forum to fix the flashlight... http://forum.xda-developers.com/xposed/modules/xposed-flashlight-fixer-fix-devices-t2867267 . Well, since doing that, I think I realized that I should have left the flashlight alone! When I tried to reboot after adding the module to xposed, I ended up in what i believe is a boot loop. The Samsung screen comes on, and then it gets stuck on the red Verizon screen. I never dreamed that a module installation could cause this; and I guess I figured if it ever happened I could get into recovery mode and restore everthing. Btw, I had done a complete backup of my phone using Titanium on my sd card.
So, here's what I can/can't do now. I can push "down-volume-button" + home + power to get to screen where you can download a cusom OS - then pushing volume-up-button goes to screen that says "Downloading...Do not turn off target!! (Nothing seems to happen from here.) - - - I cannot enter recovery mode by pressing "volume-up" + home + power keys. When I do that I get the big yellow triangle with message - System software not authorized...go to nearest Verizon store. hmmmm.... So, am I hard bricked or soft bricked? Do I have a way out? Thanks very much for any help with this!
Click to expand...
Click to collapse
No problem. Your soft bricked and it seems your on the latest firmware, correct me if I'm wrong
4.4.2 NE1? If so you can use Odin to flash back to stock 4.4.2 and you should be ok
Sent from my Nexus 5
ShapesBlue said:
No problem. Your soft bricked and it seems your on the latest firmware, correct me if I'm wrong
4.4.2 NE1? If so you can use Odin to flash back to stock 4.4.2 and you should be ok
Sent from my Nexus 5
Click to expand...
Click to collapse
ShapesBlue-
That's great news!!! Thanks!
I believe my phone was on 4.4.3. A file I used in my rooting process using Towelroot was I535VRUDNE1_I535VZWDNE1_VZW; I used Odin before for the root procedure, so the program of course is on my PC. Is there a thread around with instructions how to flash back to the stock firmware? Thanks again a million for getting back to me!
straykat said:
ShapesBlue-
That's great news!!! Thanks!
I believe my phone was on 4.4.3. A file I used in my rooting process using Towelroot was I535VRUDNE1_I535VZWDNE1_VZW; I used Odin before for the root procedure, so the program of course is on my PC. Is there a thread around with instructions how to flash back to the stock firmware? Thanks again a million for getting back to me!
Click to expand...
Click to collapse
But of course. Check this out which should get you what you need
http://forum.xda-developers.com/showthread.php?t=2639337
Sent from my Nexus 5
Try kies
straykat said:
ShapesBlue-
That's great news!!! Thanks!
I believe my phone was on 4.4.3. A file I used in my rooting process using Towelroot was I535VRUDNE1_I535VZWDNE1_VZW; I used Odin before for the root procedure, so the program of course is on my PC. Is there a thread around with instructions how to flash back to the stock firmware? Thanks again a million for getting back to me!
Click to expand...
Click to collapse
Instead of odin, you could try using samasung kies 3 and use its emergencey firmware recovery tool which dl's and intalls the correct, latest firmware on your device.
What you do:
Install kies 3 on your computer.
Boot to odin mode on your phone.
Click on tools in kies.
Select emergency firmware recovery option.
Follow on screen directions.
Hope I helped!
ShapesBlue said:
But of course. Check this out which should get you what you need
http://forum.xda-developers.com/showthread.php?t=2639337
Sent from my Nexus 5
Click to expand...
Click to collapse
Shapes Blue & Root Wizard,
Thanks much for your replies. Is it possible for me, having had 4.4.3 on phone, to go to 4.3 instead of 4.4.2? Seems some people think that's an advantage, but I'm not sure. If I did do that, could I still run xposed?
Btw, RW, I tried using your idea, but when I was attempting to do the emergency Firmware Recovery, it asked for a computer code...??? So, that method doesn't seem to be a good route for me, but thanks for the tip!
You guys don't know how happy I am to have you come to the rescue! I've been using an old iPhone 4 for calls, etc.... during the day which I don't like at all! I'll be real glad to get back to AndroidLand. Thanks again!!!
straykat said:
Shapes Blue & Root Wizard,
Thanks much for your replies. Is it possible for me, having had 4.4.3 on phone, to go to 4.3 instead of 4.4.2? Seems some people think that's an advantage, but I'm not sure. If I did do that, could I still run xposed?
Btw, RW, I tried using your idea, but when I was attempting to do the emergency Firmware Recovery, it asked for a computer code...??? So, that method doesn't seem to be a good route for me, but thanks for the tip!
You guys don't know how happy I am to have you come to the rescue! I've been using an old iPhone 4 for calls, etc.... during the day which I don't like at all! I'll be real glad to get back to AndroidLand. Thanks again!!!
Click to expand...
Click to collapse
I'm 100% sure the last update on the VZW S3 was 4.4.2 NE1. As long as you can root the phone you should be able to run xposed without an issue
And no you cannot downgrade to anything other than what your currently on
Sent from my Nexus 5
---------- Post added at 06:51 PM ---------- Previous post was at 06:50 PM ----------
Root Wizard said:
Instead of odin, you could try using samasung kies 3 and use its emergencey firmware recovery tool which dl's and intalls the correct, latest firmware on your device.
What you do:
Install kies 3 on your computer.
Boot to odin mode on your phone.
Click on tools in kies.
Select emergency firmware recovery option.
Follow on screen directions.
Hope I helped!
Click to expand...
Click to collapse
Kies won't always work as it should
Sent from my Nexus 5
Still Not Up & Running...
ShapesBlue-
Believe-it-or-not, I still haven't been able to get my s3 back up & running. When I open Odin3 v 3.09 and try to flash the firmware 1534VRUDNE1 . . . . .tar.md5 , it doesn't successfully load to the s3. I've attached a screenshot showing the Odin screen. It show "All threads completed. (succeed 0 failed 1) - btw, when I click on the firmware file within Odin, nothing appears in the box to the right of the AP field; is that correct?
Thanks for any guidance you can provide.
straykat said:
ShapesBlue-
Believe-it-or-not, I still haven't been able to get my s3 back up & running. When I open Odin3 v 3.09 and try to flash the firmware 1534VRUDNE1 . . . . .tar.md5 , it doesn't successfully load to the s3. I've attached a screenshot showing the Odin screen. It show "All threads completed. (succeed 0 failed 1) - btw, when I click on the firmware file within Odin, nothing appears in the box to the right of the AP field; is that correct?
Thanks for any guidance you can provide.
Click to expand...
Click to collapse
I can't open it. It's in the newest word format docx. I personally haven't had to do this myself and it's been awhile since I've used Odin. Damn MS having to have all files in there own format
Edit: trying to download docs by Google and seeing if it opens
Sent from my Nexus 5
---------- Post added at 08:48 PM ---------- Previous post was at 08:40 PM ----------
straykat said:
ShapesBlue-
Believe-it-or-not, I still haven't been able to get my s3 back up & running. When I open Odin3 v 3.09 and try to flash the firmware 1534VRUDNE1 . . . . .tar.md5 , it doesn't successfully load to the s3. I've attached a screenshot showing the Odin screen. It show "All threads completed. (succeed 0 failed 1) - btw, when I click on the firmware file within Odin, nothing appears in the box to the right of the AP field; is that correct?
Thanks for any guidance you can provide.
Click to expand...
Click to collapse
Can you get into recovery?
I was able to open it once I downloaded docs by google. It's been so long since I used it though. I can't recall off hand how to use it to be honest
Sent from my Nexus 5
I've looked everywhere and haven't found anything on rooting for the 930az. Found an xda rep that said his root or the root he got if from was for all s7 . Followed the instructions step by step till I reached flashing ,then my phone got stuck in a bootloop .luckily I found a post on the inputs of Oden to return to stock but I'm still persistent on finding a root for it please help!!!
Jay351 said:
I've looked everywhere and haven't found anything on rooting for the 930az. Found an xda rep that said his root or the root he got if from was for all s7 . Followed the instructions step by step till I reached flashing ,then my phone got stuck in a bootloop .luckily I found a post on the inputs of Oden to return to stock but I'm still persistent on finding a root for it please help!!!
Click to expand...
Click to collapse
When you say flashing, fhalsing what exactly got you the bootloop? Was it flashing the engineering Boot.img through Odin or the fix S7 zip through Flashfire... Or something else?
I don't have a Cricket branded S7, but always offering to help you research.
Sent from my SM-G930P using Tapatalk
POWerSUrgeSW3 said:
When you say flashing, fhalsing what exactly got you the bootloop? Was it flashing the engineering Boot.img through Odin or the fix S7 zip through Flashfire... Or something else?
I don't have a Cricket branded S7, but always offering to help you research.
Sent from my SM-G930P using Tapatalk
Click to expand...
Click to collapse
Thanks for the help it was https://youtu.be/KawiIZ4bAV8
As soon as I got to the boot.img and downloaded it to my phone that when it started.
Jay351 said:
Thanks for the help it was https://youtu.be/KawiIZ4bAV8
As soon as I got to the boot.img and downloaded it to my phone that when it started.
Click to expand...
Click to collapse
Only a few things I can think to ask:
1) You are using the Odin version by PrinceComsy... not the original version of Odin?
2) When you download the engineering boot image, you're downloading it for your phone model (S7 for S7, S7 Edge for the S7 Edge)? Maybe you accidentally downloaded the wrong one?
3) When uploading the boot image through Odin, the boot image TAR file is in the AP slot of Odin?
4) Last thing I can think is easy, is the boot image is still a TAR file correct? Its not a ZIP or any other file extension?
Have you tried downloading the image again? I invite you to check out a thread I'm part of if you want another location to download the S7 engineering boot image, that thread located here and the boot image file can be downloaded directly from here
POWerSUrgeSW3 said:
Only a few things I can think to ask:
1) You are using the Odin version by PrinceComsy... not the original version of Odin?
Yes and I tried the original also
2) When you download the engineering boot image, you're downloading it for your phone model (S7 for S7, S7 Edge for the S7 Edge)? Maybe you accidentally downloaded the wrong one?
Correct s7 for s7
3) When uploading the boot image through Odin, the boot image TAR file is in the AP slot of Odin?
Yes
4) Last thing I can think is easy, is the boot image is still a TAR file correct? Its not a ZIP or any other file extension?
I made sure it was still a tar file.
Thanks for your help I'll check it out
Click to expand...
Click to collapse
Jay351 said:
POWerSUrgeSW3 said:
Only a few things I can think to ask:
1) You are using the Odin version by PrinceComsy... not the original version of Odin?
Yes and I tried the original also
2) When you download the engineering boot image, you're downloading it for your phone model (S7 for S7, S7 Edge for the S7 Edge)? Maybe you accidentally downloaded the wrong one?
Correct s7 for s7
3) When uploading the boot image through Odin, the boot image TAR file is in the AP slot of Odin?
Yes
4) Last thing I can think is easy, is the boot image is still a TAR file correct? Its not a ZIP or any other file extension?
I made sure it was still a tar file.
Thanks for your help I'll check it out
Click to expand...
Click to collapse
You're welcome, just trying to figure it out. Though I see this is a common thing, so I wonder what is different with the Cricket version?
And you're rooting the Nougat version of the phone? This seems to be a topic floating around with no one explaining it. I've tried looking to see if maybe the processor might be somehow a "reduced" version of the 820 compared to the others... but everything makes it look like it should work.
Only other thing I would say is go back through all the steps, and make sure you're not accidentally skipping one. I did that a bunch of times when I first started off. I ended up printing off instructions and making note edits. Took me a few different sets of instructions until I found a formula that worked for my G930P
Click to expand...
Click to collapse
POWerSUrgeSW3 said:
Jay351 said:
You're welcome, just trying to figure it out. Though I see this is a common thing, so I wonder what is different with the Cricket version?
And you're rooting the Nougat version of the phone? This seems to be a topic floating around with no one explaining it. I've tried looking to see if maybe the processor might be somehow a "reduced" version of the 820 compared to the others... but everything makes it look like it should work.
Only other thing I would say is go back through all the steps, and make sure you're not accidentally skipping one. I did that a bunch of times when I first started off. I ended up printing off instructions and making note edits. Took me a few different sets of instructions until I found a formula that worked for my G930P
Click to expand...
Click to collapse
I'm sorry no we haven't received the update yet I'm still on 6.0.1. Do you mean like mixing up the steps and finding which worked with your phone?
Click to expand...
Click to collapse
Jay351 said:
POWerSUrgeSW3 said:
I'm sorry no we haven't received the update yet I'm still on 6.0.1. Do you mean like mixing up the steps and finding which worked with your phone?
Click to expand...
Click to collapse
Oh I'll have to go back and do some rereading then, because I thought I saw some websites saying that phone was already on Nougat. If you're still on MM this should be easier I would think... hmmm
For me, it took me about 4 or 5 different threads of talking about how they rooted their Sprint S7 phone, for me to find the right instructions for myself to root my phone. But I know along the way I would miss a step, then my phone wouldn't boot or bootloop like yours. That's why I went back and printed out instructions and checked off to make sure I didn't skip anything. After awhile I could wrap my head around it.
Just saying we are all human, so it's easy to skip a step. Though it doesn't seem like you're the only one having this problem. But if all the branded US phones are pretty much rooted one way or another, I don't see why yours would be any different.
Click to expand...
Click to collapse
POWerSUrgeSW3 said:
Jay351 said:
Oh I'll have to go back and do some rereading then, because I thought I saw some websites saying that phone was already on Nougat. If you're still on MM this should be easier I would think... hmmm
For me, it took me about 4 or 5 different threads of talking about how they rooted their Sprint S7 phone, for me to find the right instructions for myself to root my phone. But I know along the way I would miss a step, then my phone wouldn't boot or bootloop like yours. That's why I went back and printed out instructions and checked off to make sure I didn't skip anything. After awhile I could wrap my head around it.
Just saying we are all human, so it's easy to skip a step. Though it doesn't seem like you're the only one having this problem. But if all the branded US phones are pretty much rooted one way or another, I don't see why yours would be any different.
Click to expand...
Click to collapse
Your probably right I'll try those steps again and see if anything changes. The only model I see that's close to g930az would be the at&t which is g930a. I know I got lucky with the last attempt to try with it in soft brick. I just don't want to try to many and it be completely screwed. Because on cricket you have to buy all of you phones up front well at least I had to with mine. I'll try it again and let you know if it worked or I have a paper weight haha. Thanks again
Click to expand...
Click to collapse
Jay351 said:
POWerSUrgeSW3 said:
Your probably right I'll try those steps again and see if anything changes. The only model I see that's close to g930az would be the at&t which is g930a. I know I got lucky with the last attempt to try with it in soft brick. I just don't want to try to many and it be completely screwed. Because on cricket you have to buy all of you phones up front well at least I had to with mine. I'll try it again and let you know if it worked or I have a paper weight haha. Thanks again
Click to expand...
Click to collapse
With following the steps you are and what you have happening, you should be OK with being able Odin back to factory firmware.
Yeah Cricket is kind of the double edge sword, you have to buy the phone up front, but they have CHEAP prices for good service. I had them when I first moved to Arizona and would have kept them, if I didn't travel so much.
Report back if anything changes.
Sent from my SM-G930P using Tapatalk
Click to expand...
Click to collapse
Jay351 said:
I've looked everywhere and haven't found anything on rooting for the 930az. Found an xda rep that said his root or the root he got if from was for all s7 . Followed the instructions step by step till I reached flashing ,then my phone got stuck in a bootloop .luckily I found a post on the inputs of Oden to return to stock but I'm still persistent on finding a root for it please help!!!
Click to expand...
Click to collapse
hey can you help get my s7 g930az back to stock. i also happen to be stuck in a bootloop and i've searched everywhere and nothing
leonardo879 said:
hey can you help get my s7 g930az back to stock. i also happen to be stuck in a bootloop and i've searched everywhere and nothing
Click to expand...
Click to collapse
Do you have the stock firmware and Odin? Flash that will get you back to stock and functional. Does take awhile to flash the full imagine, but can pretty much fix any software brick issues.
Sent from my SM-G930P using Tapatalk
POWerSUrgeSW3 said:
Do you have the stock firmware and Odin? Flash that will get you back to stock and functional. Does take awhile to flash the full imagine, but can pretty much fix any software brick issues.
Sent from my SM-G930P using Tapatalk
Click to expand...
Click to collapse
Yes i have the stock firmware and Odin but it always fails. is there any other way to fix it? i tried smart switch and it stops at 69% and it says error so idk what else to try.
leonardo879 said:
Yes i have the stock firmware and Odin but it always fails. is there any other way to fix it? i tried smart switch and it stops at 69% and it says error so idk what else to try.
Click to expand...
Click to collapse
What's the failure error? OEM Unlock in Android was turned on correct?
Sent from my SM-G930P using Tapatalk
POWerSUrgeSW3 said:
What's the failure error? OEM Unlock in Android was turned on correct?
Sent from my SM-G930P using Tapatalk
Click to expand...
Click to collapse
It says "Encrypt Error" in smart switch. What does OEM Unlock mean?
leonardo879 said:
It says "Encrypt Error" in smart switch. What does OEM Unlock mean?
Click to expand...
Click to collapse
By default the phones are locked so someone can't steal your phone and Reimage it. If you boot your phone up after trying to flash do you get an FPR or some sort of error like that?
Sent from my SM-G930P using Tapatalk
POWerSUrgeSW3 said:
By default the phones are locked so someone can't steal your phone and Reimage it. If you boot your phone up after trying to flash do you get an FPR or some sort of error like that?
Sent from my SM-G930P using Tapatalk
Click to expand...
Click to collapse
No it doesn't. The phone is just stuck in a boot loop after i tried installing a .tar file in Odin that i got from a youtube video showing how to root it but it doesn't work so now i'm stuck on he boot loop.
leonardo879 said:
No it doesn't. The phone is just stuck in a boot loop after i tried installing a .tar file in Odin that i got from a youtube video showing how to root it but it doesn't work so now i'm stuck on he boot loop.
Click to expand...
Click to collapse
Yes but if you try to Odin back to the stock firmware what happens then?
Sent from my SM-G930P using Tapatalk
POWerSUrgeSW3 said:
Yes but if you try to Odin back to the stock firmware what happens then?
Sent from my SM-G930P using Tapatalk
Click to expand...
Click to collapse
It says "Fail. Model Mismatch fail" something a long that
leonardo879 said:
It says "Fail. Model Mismatch fail" something a long that
Click to expand...
Click to collapse
I would recommend going to sammobile or updato to get the firmware for your phone. Sounds like you have the wrong model. If you need help I can help in an hour or so when I get home.
Sent from my SM-G930P using Tapatalk