Related
Dear people of awesomeness,
The story: I was following the exciting thread about the new CWM support for SGS4G by krylon360 and team, followed the directions (overwriting the recovery file WITH R/W enabled, placing update.zip into the root of my SD card...), and got stuck. Didn't know what to do exactly after that, other than try to use ROM Manager to backup my phone. Saw the "Reboot into recovery" option in the ROM manager menu and thought hey, let's see what this does. Most careless, stupidest thing I've done this year. fail.
The question: What is/are the way/s to boot into stock recovery mode? I can't seem to find a definitive method for booting into "stock recovery mode", though I've found plenty of ways to boot into download mode (a whole thread of them lol). I managed to find ONE method after reading through hundreds (honest) of posts in dozens of threads here and elsewhere: Hold vol+ Vol- and Power simultaneously from a powered off state.
The secondary fail: Obviously this didn't work for me, and although I'm near certain I'm going to have to do the "Odin" thing, I just wanted to ask if anyone could clearly explain the method to boot into stock recovery?
The shameless 2nd question: This question may have been asked elsewhere, shame on me, but... the .tar I'm downloading ([ROM-ODIN]T959VUVKB5 Stock + Root -- (hxxp://forum.xda-developers.com/showthread.php?t=978836)) will it wipe my phone?
akira6968 said:
Dear people of awesomeness,
The story: I was following the exciting thread about the new CWM support for SGS4G by krylon360 and team, followed the directions (overwriting the recovery file WITH R/W enabled, placing update.zip into the root of my SD card...), and got stuck. Didn't know what to do exactly after that, other than try to use ROM Manager to backup my phone. Saw the "Reboot into recovery" option in the ROM manager menu and thought hey, let's see what this does. Most careless, stupidest thing I've done this year. fail.
The question: What is/are the way/s to boot into stock recovery mode? I can't seem to find a definitive method for booting into "stock recovery mode", though I've found plenty of ways to boot into download mode (a whole thread of them lol). I managed to find ONE method after reading through hundreds (honest) of posts in dozens of threads here and elsewhere: Hold vol+ Vol- and Power simultaneously from a powered off state.
The secondary fail: Obviously this didn't work for me, and although I'm near certain I'm going to have to do the "Odin" thing, I just wanted to ask if anyone could clearly explain the method to boot into stock recovery?
The shameless 2nd question: This question may have been asked elsewhere, shame on me, but... the .tar I'm downloading ([ROM-ODIN]T959VUVKB5 Stock + Root -- (hxxp://forum.xda-developers.com/showthread.php?t=978836)) will it wipe my phone?
Click to expand...
Click to collapse
does your phone still boot up normally?
also when you get to the recovery menu it should be blue. scroll down to reinstall packages, and that will get you to CWM recovery
Ok first, Rom Manager should not be used until Koush incorporates our device in it.
Your findings are correct, the vol+,vol-, + the power button should get you into recovery, besides that the only other way is to use an app/power menu mod but that requires the phone to be on.
It sounds like the next thing for you is Odin. From your phones current state you can, hold vol+, vol- and then plug USB Cable into phone (Brings you into download mode), ive read some users pull battery and put it back in, but the first way i explained it should get you into download mode. From there, choose Roms KB5, KC1, or KD1, and yes your device will be factory reset. Your documents should be on your SD. I dont know if you have Titanium Backup to restore your apps, if not, you will have to manually install them after your odin session.
hope this helps
E:signature verification failed
chris.... said:
also when you get to the recovery menu it should be blue. scroll down to reinstall packages, and that will get you to CWM recovery
Click to expand...
Click to collapse
When I boot into recovery mode and select reinstall packages it starts out:
install from SD card
Finding update package
Opening update package
verifying update package...
E:signature verification failed
installation aborted
I have downloaded krylon360's cwm final update.zip and put it in my root directory.
The only posibility I can think of was a friend rooted my phone with an older update.zip file and i am trying to put the new one on. I deleted the old update.zip and copied over the new one.
i then downloaded odin and followed the instructions on a post to flash my rom with the t959+root from krylon360 as well. I believe that worked, because a lot of the apps that came with the phone are back now.
i tried reinstalling packages after this and still the verification error.
i have been doing a lot of browsing, searching and reading tons of posts on here... cant seem to figure this one out. any ideas?
Thanks
If you successfully flashed your phone and have root access, double check the update.zip is in the root and make sure its the latest one. Another thing is to make sure you copied over the Recovery file and pushed (Copied) it over to System/bin folder. Once you have those two in place you can reboot into stock recovery then "re-install packages" to get to CWM Recovery.
Hooray!
I did the ODIN thing, according to the post mentioned in my OP, and it fixed everything My custom shutdown vid, startup/shutdown sounds were gone, but my apps were still there, even paid apps. No titanium backup.... guess I got lucky lol. Scared the crap outta me when it wouldn't load past the T-Mobile startup image.
I knew not to use CWM yet, was following the thread about imminent implementation of sgs4g support for CWM, but just didn't really think that booting into recovery mode from CWM would get me stuck like that. Didn't even try to install recovery for CWM, knowing that "Epic 4G" and "Vibrant", etc were not the right choice despite the seeming similarities.
I had been keeping up with moving all apps i could to SD, so maybe that saved me, I dunno.
Followed pixelbrains post to use odin and worked perfect. Thank you all!!
glad you got your phone back. \m/
fknfocused said:
If you successfully flashed your phone and have root access, double check the update.zip is in the root and make sure its the latest one. Another thing is to make sure you copied over the Recovery file and pushed (Copied) it over to System/bin folder. Once you have those two in place you can reboot into stock recovery then "re-install packages" to get to CWM Recovery.
Click to expand...
Click to collapse
Thank you for that info.... I actually finally figured it out, but it took me forever. the key kind of is what i thought, that i did not have the recovery file in the right spot. I finally found a free file manager, super manager (recommonded on one of theses posts, i read so many cant remember which one ) after fiddiling with that for like 30-40 mins i finally figured the correct procedure to allow me to paste that recovery file and once i did that, bam, cwm recovery worked fine.
so, the fact that i am able to get to that screen and the latest update.zip file is in my external sd cards root dir. i am all goo there right?
i also used odin to flash "PDA_KD1.tar.md5" my phone after i got that recovery file in the correct place, and then when that was done i booted into the cwm recovery after i downloaded "Bali_SGS4G_v1.4UV.zip" and then i hit install zip from SD card, and i selected choose zip file and selected that bali one, and then i had to scroll down like 7 spots to hit yes to install and it went for a few seconds and then acted like it was done, so i just hit back and then reboot. how do i know if that worked? cuz i dont see anything saying bali at all on my phone...
does it sound like i did that right?
thanks again
edge228 said:
Thank you for that info.... I actually finally figured it out, but it took me forever. the key kind of is what i thought, that i did not have the recovery file in the right spot. I finally found a free file manager, super manager (recommonded on one of theses posts, i read so many cant remember which one ) after fiddiling with that for like 30-40 mins i finally figured the correct procedure to allow me to paste that recovery file and once i did that, bam, cwm recovery worked fine.
so, the fact that i am able to get to that screen and the latest update.zip file is in my external sd cards root dir. i am all goo there right?
i also used odin to flash "PDA_KD1.tar.md5" my phone after i got that recovery file in the correct place, and then when that was done i booted into the cwm recovery after i downloaded "Bali_SGS4G_v1.4UV.zip" and then i hit install zip from SD card, and i selected choose zip file and selected that bali one, and then i had to scroll down like 7 spots to hit yes to install and it went for a few seconds and then acted like it was done, so i just hit back and then reboot. how do i know if that worked? cuz i dont see anything saying bali at all on my phone...
does it sound like i did that right?
thanks again
Click to expand...
Click to collapse
settings menu then go to about phone and check the kernel
Sent from my SGH-T959V using XDA Premium App
thank you, it shows the bali as kernel... so glad to see i did it correctly
Hey guys so what happened was that I was trying to root my phone through Gingerbread and Odin (as my infuse is Rogers). But I forgot to put in a SD card so now my phone is stuck in reboot loop! I have tried everything you guys have mentioned online! I cleared the user data but no avail. I inserted a SD card, even put on the SGHI997 rom, inserted the folders voodoo and disable-lagfix and still didnt work. I tried unbricking it via GTG but instead my rogers is gone and now I have AT&T and still in a loop! HELP!
Did you look at this post to see if it helps.
http://forum.xda-developers.com/showthread.php?t=1205381
yup i did. It was the GTG process i mentioned that i tired before. the bootlooping has stopped but know is stuck on the samsung screen :S i left at the screen for 30 mins now still nothing. i cant even enter recovery mode anymore
u can not get into download mode??
yeah i still can
Were you able Odin back to stock?
not really, these are the results of odin:
GTG odin process: stuck at samsung screen. Cannot enter recovery mode.
Gingerbread process: goes to clockwordmod recovery (red txt). I wipe sd, wipe data/factory reset, enters bootloop. However can enter recovery mode.
Rogers stock: goes to andriod recovery mode (blue txt). I wipe sd, wipe data/factory reset, enters bootloop. However can enter recovery mode.
so no phone does not go back normal functioning self
sharkray said:
not really, these are the results of odin:
GTG odin process: stuck at samsung screen. Cannot enter recovery mode.
Gingerbread process: goes to clockwordmod recovery (red txt). I wipe sd, wipe data/factory reset, enters bootloop. However can enter recovery mode.
Rogers stock: goes to andriod recovery mode (blue txt). I wipe sd, wipe data/factory reset, enters bootloop. However can enter recovery mode.
so no phone does not go back normal functioning self
Click to expand...
Click to collapse
What Rom were using?
Try checking repartion when you use Odin.
Corvette Dave said:
What Rom were using?
Try checking repartion when you use Odin.
Click to expand...
Click to collapse
From recovery you should be able to get to download.
Try this link with the option to get root & 3e recovery.
http://forum.xda-developers.com/showthread.php?t=1092021
It sounds like you do not have modified 3e installed so it will check for sig?
from there if you install packages 2X you can get to CWM and flash what you will.....
EDIT: Sorry, I see you are able to get to CWM
can you not put a new rom on the SD and flash it? Or start over again with a fresh stock in case there was a glitch in the first install?
I am in the same situation and have the same problem too, i"ve looked lots of post and tried different method,,
even GTG's method it still in boot loop!!!!T^T
can anyone help
Corvette Dave said:
What Rom were using?
Try checking repartion when you use Odin.
Click to expand...
Click to collapse
Hey when you say rom is assume you mean pda kernal files that come with odin and such? Then those would be PDA_ROGERS_UXKG3.tar.md5, PDA_Infuse_Gingerbread.tar.md5, the files the come in GTG unbrick.
I have also did repartion, but it did nothing.
I you mean rom by the SGHI997 rom i tried that too
Edit: Okay so I have been searching online and discovered you need put the room onto the internal sd card. But i dont see how i can do that considering my phone goes to recovery mode straight away
SNadler said:
From recovery you should be able to get to download.
Try this link with the option to get root & 3e recovery.
http://forum.xda-developers.com/showthread.php?t=1092021
It sounds like you do not have modified 3e installed so it will check for sig?
from there if you install packages 2X you can get to CWM and flash what you will.....
EDIT: Sorry, I see you are able to get to CWM
can you not put a new rom on the SD and flash it? Or start over again with a fresh stock in case there was a glitch in the first install?
Click to expand...
Click to collapse
Okay so I have been searching online and discovered you need put the room onto the internal sd card. But i dont see how i can do that considering my phone goes to recovery mode straight away. Even using odin to flash a fresh stock gives same problem
I'd like to bring the UnBrickable mod to this platform which will allow us to flash bootloaders to UnBrickably modded devices.. and seriously mod the crap out of the firmware... If you decide to turn it in for repair, consider PMing me so I can do some reverse engineering on it and then you can turn it in for not being able to turn on
Your device likey requires a PIT flash just so you know.
sharkray said:
Okay so I have been searching online and discovered you need put the room onto the internal sd card. But i dont see how i can do that considering my phone goes to recovery mode straight away. Even using odin to flash a fresh stock gives same problem
Click to expand...
Click to collapse
In CWM (red) under "mounts and Storage, select "Mount USB". Of course you are connect to your computer when you do this and in windows an external drive should become available. Place the zip file on the root of that drive.
Once copied, disconnect from windows first then unmout in CWM. from here you can go directly to and install from zip.
Hope that makes sense.
6
hey i tired what you said. i did a few times nothing came. then on my 4th try the driver showed up on my computer but it said 'please insert drive.' i reset and tried again the drive didnt show up
Remove the sim card and try again. Also,you can always copy a rom to an sdcard and install that in your Infuse.
Cranky...
hey i tried what you said but same result. i cant put on rom on because they mass storage does not show on my pc :S after the odd time of resetting and entering recovery mode, it connects but it says 'insert drive'
follow this link,, i recoverd my infuse 4G using this rom!!!!!!!
THX GTG very much!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
http://forum.xda-developers.com/showthread.php?t=1193927
AdamOutler said:
I'd like to bring the UnBrickable mod to this platform which will allow us to flash bootloaders to UnBrickably modded devices.. and seriously mod the crap out of the firmware... If you decide to turn it in for repair, consider PMing me so I can do some reverse engineering on it and then you can turn it in for not being able to turn on
Your device likey requires a PIT flash just so you know.
Click to expand...
Click to collapse
yes try a pit flash with repartition selected, it might fix it. theses types of bricks have been rare on the infuse and many people dont have experience with them. the available pit is packaged with the att ultimate unbrick but you should probably use it with the rogers odin firmware.
001100 said:
follow this link,, i recoverd my infuse 4G using this rom!!!!!!!
THX GTG very much!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
http://forum.xda-developers.com/showthread.php?t=1193927
Click to expand...
Click to collapse
OMGGGGGGGGGGGGGG YOU ROCK!!!! DUDE! IT works fine and its rooted! Thank you so much!
And thank you everyone else for taking the time to help me out and which ever way you could! This forum is pretty awesome thanks guys!
sharkray said:
OMGGGGGGGGGGGGGG YOU ROCK!!!! DUDE! IT works fine and its rooted! Thank you so much!
And thank you everyone else for taking the time to help me out and which ever way you could! This forum is pretty awesome thanks guys!
Click to expand...
Click to collapse
Sorry it took so long. I'll try to get in touch with GTG to make sure that his unbrick threads are more clear as to which device they are appropriate for.
UCKD5/E3 unbricks will only work on AT&T Infuses
UXKG3 will only work on Rogers Infuses
Custom Gingerbread ROMs will work on both, but there are no Odin-flashable packages for these.
How do I revert back after one-click root to the stock everything including radio, rom, build, etc. I am currently running Cynagon mod RC1 7 and have had numerous issues, I would just like a clean, simple cut answer so I can give this to someone for the holidays, any help would be mightly appreciated, as i've asked this in the past and can never seem to get a clear cut answer, thanks.
wierd165 said:
How do I revert back after one-click root to the stock everything including radio, rom, build, etc. I am currently running Cynagon mod RC1 7 and have had numerous issues, I would just like a clean, simple cut answer so I can give this to someone for the holidays, any help would be mightly appreciated, as i've asked this in the past and can never seem to get a clear cut answer, thanks.
Click to expand...
Click to collapse
Just flash a full rom, it should restore the radio, the recovery, and the OS. Then do a reset to factory defaults if you are paranoid.
Get the proper rom for you phone here:
http://forum.xda-developers.com/showthread.php?t=1063664
If you're on T-Mobile, you have an i9020-T, this should work for you. It is the full 2.3.6 image.
http://android.clients.google.com/p...a25375426.signed-soju-ota-189904.1ada2537.zip
Is this also working if you're coming from stock unrooted ICS 4.0.3 ?
And
Is there any risk of loosing IMEI if you're going full ROM ?
mahanddeem said:
Is this also working if you're coming from stock unrooted ICS 4.0.3 ?
And
Is there any risk of loosing IMEI if you're going full ROM ?
Click to expand...
Click to collapse
I have reverted back from 4.0.3 yesterday by reflashing the full 2.3.6 rom without any issues. I'm not sure I understand what you mean by losing IMEI.
My phone works just fine after doing this (more than once!).
pcbroch said:
Just flash a full rom, it should restore the radio, the recovery, and the OS. Then do a reset to factory defaults if you are paranoid.
Get the proper rom for you phone here:
http://forum.xda-developers.com/showthread.php?t=1063664
If you're on T-Mobile, you have an i9020-T, this should work for you. It is the full 2.3.6 image.
http://android.clients.google.com/p...a25375426.signed-soju-ota-189904.1ada2537.zip
Click to expand...
Click to collapse
Ok here's my problem i did the ics update earlier before you told me this and still having issues, now when I go to recovery I get a android with his chest open with a red caution sign on it...how could I just format everything, essentially make it the way it was out of box so I could start over...because of all the issues I'm currently having.
When you get to that point, you need to hold down power then press vol up. Then you will be able to flash the zip. You need to put the zip on the phone first though, unless you have CWM recovery, in which case you can mount the sdcard section and move it across then, and flash it after.
OK thanks...Just please let's summarize this
1.You were on I9020T bone stock , unrooted
2.You had GB 2.3.6
3.You updated manually (or OTA) to 4.0.3
4.You decided to revert to GB 2.3.6
5.You used exactly the same method of manual update (stock recovery after copying the .zip file and in this case the full ROM of 2.3.6 to SD)
6.You followed the stock recovery steps and chose the .zip 2.3.6..
7.After everything was setup , you booted into GB 2.3.6 without any problems
Is that right ? or better if you make the exact detailed steps you did to revert to GB 2.3.6 would be apreciated
Thanks
furiannn said:
When you get to that point, you need to hold down power then press vol up. Then you will be able to flash the zip. You need to put the zip on the phone first though, unless you have CWM recovery, in which case you can mount the sdcard section and move it across then, and flash it after.
Click to expand...
Click to collapse
Tried, but then I get this error:
--Install /sdcard ...
Finding update package...
Opening update package...
Verifying update package...
Installing update...
assert failed: !less_than_int(1316544229. getprop("ro.build.date.utc"))
E:Error in /tmp/sideload/package.zip
(Status 7)
Installation aborted.
Any help?
I think u need a custom recovery to be able to revert back to gingerbread
Sent from my Nexus S using XDA App
Raver27 said:
I think u need a custom recovery to be able to revert back to gingerbread
Sent from my Nexus S using XDA App
Click to expand...
Click to collapse
how would I go about flashing the custom recovery? I tried to flash another full rom package with the recovery in it and like i said i got that error...
Do you have a folder in windows where you have been flashing stuff from, using fastboot?
If so, just get this recovery image http://forum.xda-developers.com/showthread.php?t=988686
Download either the blue or green 5023 image. Doesnt matter which just changes colour of mod place the file in the same folder as the fastboot.
Next, with the phone off and after attaching the phone to USB, turn it on while pressing vol-up and power. You should see the boot option screen, the fastboot screen. Leave the phone there.
Now go back to cmd window in windows, and browse to the folder where you have all the fastboot files and where you have put the above image file. Then type in the following:
fastboot flash recovery <image name.img> (without the < >)
press enter and it'll flash the recovery and then you can install the old version of android
furiannn said:
Do you have a folder in windows where you have been flashing stuff from, using fastboot?
If so, just get this recovery image http://forum.xda-developers.com/showthread.php?t=988686
Download either the blue or green 5023 image. Doesnt matter which just changes colour of mod place the file in the same folder as the fastboot.
Next, with the phone off and after attaching the phone to USB, turn it on while pressing vol-up and power. You should see the boot option screen, the fastboot screen. Leave the phone there.
Now go back to cmd window in windows, and browse to the folder where you have all the fastboot files and where you have put the above image file. Then type in the following:
fastboot flash recovery <image name.img> (without the < >)
press enter and it'll flash the recovery and then you can install the old version of android
Click to expand...
Click to collapse
I don't believe I have a folder as such, being a person who is not familiar with the lingo, etc of all this i rooted it with one-click mod, and just flash things through this, are you saying I can flash things externally? sorry to sound like a bum, but i'm trying to understand thanks.
No problem, we're all noobs once, hell i still am and only just coming to terms with it all! Just need to do a bit of researching, but heres the basics...
fastboot lets you flash stuff to the phone from windows, when the phone is attached to the USB and is in fastboot mode (just turned on, from vol-up/pwr).
Can unlock the boot loader and flash recovery images from there. Once thats done, most other stuff can be done from within the new recovery mode, clockworkmod being the one that everyone uses.
over at nexusshacks it's explained really well how to root your phone. And he provides a zip with everything you could want. That zip is the folder I was talking about in the last post. It comes with drivers to install when you first plug the USB in and the PC recognises the phone. Download the pack, install them drivers and then go back to my last post and take it from there
http://downloadandroidrom.com/file/NexusS/rooting/nexussrootnew.zip
EDIT: Also do a full wipe/data reset just before you flash the new rom
furiannn said:
No problem, we're all noobs once, hell i still am and only just coming to terms with it all! Just need to do a bit of researching, but heres the basics...
fastboot lets you flash stuff to the phone from windows, when the phone is attached to the USB and is in fastboot mode (just turned on, from vol-up/pwr).
Can unlock the boot loader and flash recovery images from there. Once thats done, most other stuff can be done from within the new recovery mode, clockworkmod being the one that everyone uses.
over at nexusshacks it's explained really well how to root your phone. And he provides a zip with everything you could want. That zip is the folder I was talking about in the last post. It comes with drivers to install when you first plug the USB in and the PC recognises the phone. Download the pack, install them drivers and then go back to my last post and take it from there
http://downloadandroidrom.com/file/NexusS/rooting/nexussrootnew.zip
EDIT: Also do a full wipe/data reset just before you flash the new rom
Click to expand...
Click to collapse
I'm using clockwork right now, but it seems to be corrupted, im running 4.0.3 right now on a full rom package, so your saying I should still do this? I think i may have done all that before, as the phone is rooted, but I used the one-click method instead.
Just download that file and then you'll have what you need on your pc to do what i mentioned above. Plug the phone in and reflash the new recovery which will not harm it, and then you'll be able to stick gingerbread or ICS back on. You gotta try things out otherwise you'll not understand what is going on. I dont know of any one click thing that will let you go back to default as it was before. After it flashes the new recovery, scroll down to "recovery" on the screen and press the power button, dont restart the system.
In hindsight, while the one click methods are easy to use, theyre getting used by people that dont do the necessary research to learn about the rooting and flashing process. This means you end up skipping so much that you learn about the whole rooting and flashing proocess when doing it manually, which in turn means you have more trouble getting out of it if you want it back to the way it was! No offence intended here, but you just need to man up and do it! All will be well
Phone was running ATT-Stock-Rooted-D80020k.zip and I loaned it out.
Now it only boots Phil recovery. Can't get into download mode to use Flashtool. Internal storage is there and I can push files to storage. Attempt to flash same rom give Code 7 error, which usually means asserts error. I can likely remove the asserts script but that's risky. If I lose the recovery, I have nothing. I don't know how to get the download mode back.
I have no idea of what to try now. Maybe boot.img? A different rom? Is there something that can be flashed or pushed to be able to get download mode?
Ideas?
king200 said:
Phone was running ATT-Stock-Rooted-D80020k.zip and I loaned it out.
Now it only boots Phil recovery. Can't get into download mode to use Flashtool. Internal storage is there and I can push files to storage. Attempt to flash same rom give Code 7 error, which usually means asserts error. I can likely remove the asserts script but that's risky. If I lose the recovery, I have nothing. I don't know how to get the download mode back.
I have no idea of what to try now. Maybe boot.img? A different rom? Is there something that can be flashed or pushed to be able to get download mode?
Ideas?
Click to expand...
Click to collapse
This might help: http://forum.xda-developers.com/showpost.php?p=53548938&postcount=45
jdk2 said:
This might help: http://forum.xda-developers.com/showpost.php?p=53548938&postcount=45
Click to expand...
Click to collapse
Whatever I did, it worked! I entered some commands in terminal mode and, somehow, I was then able to get into download mode and use LG Flashtool to get a rom into the phone and vioila! I have a phone back.
A quick $300 fix.
Hi everyone,
Forgive me if this is a noob question but I've been searching all night and I cannot find a solution.
Background - A friends sister recently passed away and she asked me if I could somehow get the data off of her phone. The phone is a Boost Mobile LG855 (Marquee). It is not rooted, is not in debug mode and is keylocked. We don't have the unlock code so based on what I've read, my only hope is to get CWM somehow flashed on the phone and use it to back up the phone data to the SD card.
Because I cannot get the phone into debug mode and there doesn't seem to be a download mode on this phone, any of the USB-based flashing techniques will not work. I am able to connect the phone as a storage device and access the SD card from my computer but I can't get the computer to recognize it as an ADB device. So that rules out the fastboot, adb or odin-like methods. I believe my only hope is to use the stock recovery to flash CWM from the SD Card (update.zip method).
I downloaded the CWM image for this phone (recovery-clockwork-5.0.2.8-marquee.img) but I can only flash a file called "update.zip" from the stock recovery options. I read somewhere that I should be able to rename the image file to "recovery.img" and put it in an uncompressed "update.zip" file which I did. I copied it to the SD card and tried the flash it only to get the dreaded "E: signature verification failed" "installation aborted." message.
Here are my questions:
Is what I am trying to do even possible?
Can I flash a .img image by sticking it in an update.zip file?
Do I need to create a /dev/recovery/ structure inside the zip file?
If so, how do I fix the zip file so it doesn't fail the signature verification?
Is there a better way to do what I am trying to do?
There are all kinds of tutorials on how to use CWM to flash things from the SD card but surprisingly few that describe how to do what I am trying.
Any help or suggestions would be most appreciated. Thank you so much in advance.
JZ_Hack_Nub said:
Hi everyone,
Forgive me if this is a noob question but I've been searching all night and I cannot find a solution.
Background - A friends sister recently passed away and she asked me if I could somehow get the data off of her phone. The phone is a Boost Mobile LG855 (Marquee). It is not rooted, is not in debug mode and is keylocked. We don't have the unlock code so based on what I've read, my only hope is to get CWM somehow flashed on the phone and use it to back up the phone data to the SD card.
Because I cannot get the phone into debug mode and there doesn't seem to be a download mode on this phone, any of the USB-based flashing techniques will not work. I am able to connect the phone as a storage device and access the SD card from my computer but I can't get the computer to recognize it as an ADB device. So that rules out the fastboot, adb or odin-like methods. I believe my only hope is to use the stock recovery to flash CWM from the SD Card (update.zip method).
I downloaded the CWM image for this phone (recovery-clockwork-5.0.2.8-marquee.img) but I can only flash a file called "update.zip" from the stock recovery options. I read somewhere that I should be able to rename the image file to "recovery.img" and put it in an uncompressed "update.zip" file which I did. I copied it to the SD card and tried the flash it only to get the dreaded "E: signature verification failed" "installation aborted." message.
Here are my questions:
Is what I am trying to do even possible?
Can I flash a .img image by sticking it in an update.zip file?
Do I need to create a /dev/recovery/ structure inside the zip file?
If so, how do I fix the zip file so it doesn't fail the signature verification?
Is there a better way to do what I am trying to do?
There are all kinds of tutorials on how to use CWM to flash things from the SD card but surprisingly few that describe how to do what I am trying.
Any help or suggestions would be most appreciated. Thank you so much in advance.
Click to expand...
Click to collapse
None of this is necessary..
You can not flash a zip made by us from stock Recovery.
Your final hope is fastboot mode.
Before that, Install Minimal ADB and Fastboot in PC (Google it)
Switch off the mobile.
Hold any button combination like Power + Volume Up (or whatever, it's specific to phone) which will take you to a boot menu.
Connect phone to PC.
Select fastboot option in that menu from phone.
Now open Minimal ADB and Fastboot desktop icon and type the following:
Code:
fastboot boot recovery location_of_recovery\recovery.img
This will boot the CWM recovery.
Do whatever you want there
Thanks for your suggestion. I did start to go down that road and installed fastboot/adb. I gave up when the only key combination I could find for this stupid phone was power+volume down to boot into recovery. I will search more on whether there is a boot menu available on Boost Mobiles crappy stock ROM. Will update on what I find.
Thx again for the suggestion.
JZ_Hack_Nub said:
Thanks for your suggestion. I did start to go down that road and installed fastboot/adb. I gave up when the only key combination I could find for this stupid phone was power+volume down to boot into recovery. I will search more on whether there is a boot menu available on Boost Mobiles crappy stock ROM. Will update on what I find.
Thx again for the suggestion.
Click to expand...
Click to collapse
Inside the recovery, check if you have an option like 'bootloader' or 'fastboot' or 'debug'
If there's something like that, that's the fastboot mode.
Some phones don't have fastboot mode, so the phone might be one of those if there's nothing like that
Anyway, what data do you want to recover from the phone??
Believe it or not, I'm reading that these LG phones require a special cable from shady overseas websites to access the boot loader and flash capabilities.
Awesome...
GokulNC said:
Inside the recovery, check if you have an option like 'bootloader' or 'fastboot' or 'debug'
If there's something like that, that's the fastboot mode.
Some phones don't have fastboot mode, so the phone might be one of those if there's nothing like that
Anyway, what data do you want to recover from the phone??
Click to expand...
Click to collapse
Ya there's nothing like that unfortunately.
Mainly contacts and text messages. There's suspicions that her bf may have had something to do with her death and the police won't bother to do forensics on the phone so she asked if I could help.
I've been doing more research on this and have established that there is no way to get the LG855 (Marquee) into bootloader mode and no way to unlock the bootloader without getting past the keylock, I'm back to square one.
So my question remains, is there a way to convert a CWM recovery image (.img) file into a properly signed update.zip file that I can use the stock recovery to flash onto the phone from the SD card?
Thanks.
JZ_Hack_Nub said:
I've been doing more research on this and have established that there is no way to get the LG855 (Marquee) into bootloader mode and no way to unlock the bootloader without getting past the keylock, I'm back to square one.
So my question remains, is there a way to convert a CWM recovery image (.img) file into a properly signed update.zip file that I can use the stock recovery to flash onto the phone from the SD card?
Thanks.
Click to expand...
Click to collapse
I found this - which may help me sign the zip file.
http://forum.xda-developers.com/showthread.php?t=1966007
Still not sure if the .img file will flash properly without making changes to it. Any thoughts?
JZ_Hack_Nub said:
I found this - which may help me sign the zip file.
http://forum.xda-developers.com/showthread.php?t=1966007
Still not sure if the .img file will flash properly without making changes to it. Any thoughts?
Click to expand...
Click to collapse
You can never flash a zip file created by us from stock recovery.
You can do it from custom recovery.
However hard you try, you can never do it from stock recovery. It's waste of time
GokulNC said:
You can never flash a zip file created by us from stock recovery.
You can do it from custom recovery.
However hard you try, you can never do it from stock recovery. It's waste of time
Click to expand...
Click to collapse
Appreciated. I'm not one to give up though. I think I'll try this and let you know if it works. Thanks for all of your advice.
http://forum.xda-developers.com/showthread.php?t=732957