Related
I recently upgraded my captivate with the official att/samsung froyo release. So far it seems to have made my phone worse. It's slower, and freezes periodically. I was wondering if it's possible to root after the official upgrade or is this blocked. Hoping I can root and flash new kernel and get better performance. This droid world is new to me, so any assistance would be appreciated, especially if it's written for a novice.
Btw, I've done 2 master resets hoping it would help, and it didn't.
Here is how to install AT&T's official 2.2 Froyo ROM with all of the suckiness removed and a bunch of awsomeness added.
1. Download this. Rename it update.zip and copy it to sd_card, the the phone's internal memory,not the removable micro sd card.
http://www.mediafire.com/?ve234hbg64ctcu0
2. Download this, and copy it to sd_card.
http://www.designgears.com/roms/cognition/Cognitionv4.3.1.zip
3. Use this tool to flash back to 2.1 (don't master clear)
http://forum.xda-developers.com/showthread.php?t=731989
4. Remove battery, hold vol up + vol down + power and reinsert battery. Phone will boot into recovery mode.
5. In recovery select "reinstal packages". Then reboot
6. If phone reboots back into a the same recovery, repeat 5
7. Phone should boot into a custom recovery.
8. Select install zip -> choose zip -> Cognitionv4.3.1.zip -> install
9. Reboot
cypho said:
Here is how to install AT&T's official 2.2 Froyo ROM with all of the suckiness removed and a bunch of awsomeness added.
1. Download this. Rename it update.zip and copy it to sd_card, the the phone's internal memory,not the removable micro sd card.
http://www.mediafire.com/?ve234hbg64ctcu0
2. Download this, and copy it to sd_card.
http://www.designgears.com/roms/cognition/Cognitionv4.3.1.zip
3. Use this tool to flash back to 2.1 (don't master clear)
http://forum.xda-developers.com/showthread.php?t=731989
4. Remove battery, hold vol up + vol down + power and reinsert battery. Phone will boot into recovery mode.
5. In recovery select "reinstal packages". Then reboot
6. If phone reboots back into a the same recovery, repeat 5
7. Phone should boot into a custom recovery.
8. Select install zip -> choose zip -> Cognitionv4.3.1.zip -> install
9. Reboot
Click to expand...
Click to collapse
Dont you think you should have told the op that those are directions for flashing Cognition 4.3.1?? What if he doesn't want to flash a rom, just a kernel?
OP: Download Superclick v1.7. It will root your phone. From there, search Development threads for a kernel.
cypho said:
Here is how to install AT&T's official 2.2 Froyo ROM with all of the suckiness removed and a bunch of awsomeness added.
1. Download this. Rename it update.zip and copy it to sd_card, the the phone's internal memory,not the removable micro sd card.
http://www.mediafire.com/?ve234hbg64ctcu0
2. Download this, and copy it to sd_card.
http://www.designgears.com/roms/cognition/Cognitionv4.3.1.zip
3. Use this tool to flash back to 2.1 (don't master clear)
http://forum.xda-developers.com/showthread.php?t=731989
4. Remove battery, hold vol up + vol down + power and reinsert battery. Phone will boot into recovery mode.
5. In recovery select "reinstal packages". Then reboot
6. If phone reboots back into a the same recovery, repeat 5
7. Phone should boot into a custom recovery.
8. Select install zip -> choose zip -> Cognitionv4.3.1.zip -> install
9. Reboot
Click to expand...
Click to collapse
this is horrible advice for someone running 2.2. 2.2 brought 3e recovery which does not allow flashing 'update.zip' any more.
all the OP was looking for was how to root.
SuperOneClick 1.7 will take care of that in the RAGE method....
Pirateghost said:
this is horrible advice for someone running 2.2. 2.2 brought 3e recovery which does not allow flashing 'update.zip' any more.
all the OP was looking for was how to root.
SuperOneClick 1.7 will take care of that in the RAGE method....
Click to expand...
Click to collapse
Thanks for the Rage part. Keep forgetting that, even when I use it on my phone.
So I tried superclick 1.7 and had no luck. It would say waiting for device, I'd plug in. my phone and then would say it was running, but nothing happened. Tried with debugging on and off. Any advice? Also can you direct me where to get superclick. I'm worried that the site I got it from may be malicious. Also I'm running windows 7, just in case that makes a difference.
http://forum.xda-developers.com/showthread.php?t=803682
make sure you have the drivers installed for you phone, and you have USB debugging ON....it has to be on in order for it to work
Thank you Pirateghost. Got it rooted.
Considering I know very little about all this, is there somewhere you can to direct me to get easy, step by step, directions on how to load a new rom on my phone? I got it rooted using superoneclick v1.7, loaded titanium back up and rom manager. I'm using one click lag fix, although it seems many feel that it's not good. I was thinking of going with cog4. Any suggestions? Your awesome, thanks.
Cdub3 said:
Thank you Pirateghost. Got it rooted.
Considering I know very little about all this, is there somewhere you can to direct me to get easy, step by step, directions on how to load a new rom on my phone? I got it rooted using superoneclick v1.7, loaded titanium back up and rom manager. I'm using one click lag fix, although it seems many feel that it's not good. I was thinking of going with cog4. Any suggestions? Your awesome, thanks.
Click to expand...
Click to collapse
Flashing a rom is quite simple. Obviously I'm going to be biased and suggest Andromeda3 as the recommended ROM, since I put so much time into that rom. Check out the guides and tutorials found in Q&A and development
Sent from my HTC Vision
Most all of the roms here have flashing instructions on page 1 of that thread.
And back up before you start. You can never back up too much.
Sorry about my stupidity, but people keep mentioning 3e recovery being an issue for me since I have froyo. Will odin take care of this? Also does this whole process take me back to eclair or will it still be froyo. It seems the more questions and information, the more this process its intimidating me. Just don't want to ruin my phone
Cdub3 said:
Sorry about my stupidity, but people keep mentioning 3e recovery being an issue for me since I have froyo. Will odin take care of this? Also does this whole process take me back to eclair or will it still be froyo. It seems the more questions and information, the more this process its intimidating me. Just don't want to ruin my phone
Click to expand...
Click to collapse
yes odin will fix this in about 5 seconds or less!
before you start disable lagfix! this is important! but speed mod may just work be cause it has similar lagfix options available in the kernel. still wouldn't try it though.
recovery is part of the kernel. grab a kernel in .tar format. speedmod is great for this
open odin (not one click but full version) put .tar of kernel in pda slot
put phone in download mode (if 3 button is broke you may want to flash back to 2.1 with 3 button fix or another rom with 3-button fix via odin) you can access download mode via use of adb in the mean time.
plug in phone, make sure auto reboot is selected and reformat is not selected.
the left most box in odin should turn yellow. hit start. it takes about 3 seconds. phone will reboot with new kernel all data will be intact.
at that point you can enter recovery mode which will be cwm. you can root from cwm or install a rooted rom that will include another kernel.
kernel flashing doesn't effect data or settings or version number but kernel need to be same android version, eclair rom needs eclair kernel, froyo needs froyo ect. but a 2.2 rom can run 2.2.1 kernel and vice versa. same goes with 2.3 and 2.3.3 ect. also samsung tw roms need tw kernels, sense roms need sense kernels and aosp roms need aosp kernels. and of cource the kernel should be for you phone.
Speedmod is an i9000 kernel, if you want to just root and use stock froyo you will have to flash am I9000 modem.bin or there will be sound issues...
Use the 3e recovery push. Had to use on Vibrant.
Sent from my SAMSUNG-SGH-I897 using XDA App
studacris said:
Speedmod is an i9000 kernel, if you want to just root and use stock froyo you will have to flash am I9000 modem.bin or there will be sound issues...
Click to expand...
Click to collapse
true but you can flash a different kernel afterwards.
if the op want to read all about fixing 3e recovery with adb or other method fine. but a kernel swap is quick and easy.
Dani897 said:
true but you can flash a different kernel afterwards.
if the op want to read all about fixing 3e recovery with adb or other method fine. but a kernel swap is quick and easy.
Click to expand...
Click to collapse
I agree, just informing in case he stuck with a captivate modem with that kernel and couldn't understand the issues he was having.
so i did this, and on odin it says it passed and that it was successful, but when i check my kernel, it doesn't say speedmod. it's just the same stock kernel. I don't have kies, I have kies mini. Don't know if that's the prob. I'm in the US and I didn't think you could get the full kies. My drivers said there was an error, saying the I9000 drivers didn't work. I downloaded the kernel version specific for the ATT captivate sgh-1897. I downloaded the odin version, not the cwm version because that is what the instructions on the tourist in paradise site said to do. what now? I honestly think all I need is the kernel. I'm just looking to make my phone run faster and try to get the most out of my battery.. speedmod kernel seems right up my ally. I don't think I even need to mess with a ROM. So will this not work with kies mini? any help is appreciated
Cdub3 said:
so i did this, and on odin it says it passed and that it was successful, but when i check my kernel, it doesn't say speedmod. it's just the same stock kernel. I don't have kies, I have kies mini. Don't know if that's the prob. I'm in the US and I didn't think you could get the full kies. My drivers said there was an error, saying the I9000 drivers didn't work. I downloaded the kernel version specific for the ATT captivate sgh-1897. I downloaded the odin version, not the cwm version because that is what the instructions on the tourist in paradise site said to do. what now? I honestly think all I need is the kernel. I'm just looking to make my phone run faster and try to get the most out of my battery.. speedmod kernel seems right up my ally. I don't think I even need to mess with a ROM. So will this not work with kies mini? any help is appreciated
Click to expand...
Click to collapse
speedmod might not change the kernel version in about phone, some devs do not change that.
use the 3 button combo to get into recovery mode, does it boot into cwm with green text? if it did you are running speedmod.
also when phone boots it will say sgh-i897 on a black splash screen after the att param.ifs splash screen
if you still have blue samsung 3e recovery and no black galaxy s splash screen there was a problem.
So I do get a different screen when phone fires up. It does say sgh-1897 which is different than before, I can't seen to get the 3 button recovery thing to happen though. Hope it's right, just thought my phone would be faster. Seemed faster with oneclick lag fix. Guess I'm crazy. The phone does seem louder when it fires up, which I read this kernel helps make happen. Is there another way to get to recovery to see if the 3e issue is fixed. If so is there another kernel that would be faster for me or do I need to do the ROM thing next. Also, since I didn't think this worked I tried to install oneclick lag fix again, but couldn't because there wasn't enough space.does this mean speed mod went through. I also did the speed mod flash like 3 times thinking that it wasn't working. is that as problem? Sorry for all the questions. I'm just new to all this and I don't have much computer savy either. Thanks for putting up with me.
ok so you do have speedmod.
for recovery, with phone off, press volume+volume for 2 seconds
continue to hold volume and press power, holding all three till the first splash screen pops up then release.
first decide if you want to keep speedmod, you can root in recovery and flash to a different kernel after, can also flash a new rom now.
speedmod is an i9000 port. it may not work perfect with the kb1 modem. if you flash kc1 modem it will not work with bluetooth calling. i use it as a tool to flash other roms, to root, and to flash other kernels and not deal with 3e, that is the point of me suggesting it. but giving up bluetooth calling isn't a big sacrifice to some people and many do use it like you are.
now if you want speedmod and lagfix you can do that in recovery, speedmod has a universal lagfix. disable this before flashing a voodoo kernel (or stock) if you change it later.
the lagfix has the options to set data, dbdata, or cache to ext2,ext3,ext4,ext4 non journalling, or jfs
it can also set /system to ext4
voodoo settings are /system=ext4
/cache=ext4nj
/data=ext4
/dbdata=ext4
these are the most common settings and are very successfull.
feel free to pm me with questions, rom recomendation, ect...
edit, just noticed you already have root via rageagaintthecage method via superoneclick, i always forget about that on the sgs though i have done it on an evo the hard way a while back, now we have superoneclick so it's not hard anymore. you can install a market app called sgs kernel flash and experiment with kernels that way. prolly what i'd have told you if i read the whole thread.
Hello there guy's I'm new with rooted charge phones. Well guy's last night I did a stupid thing with my phone.. I accidentally updates my phone with the new OTA FP1 with rooted rom. Well guy's now my phone is screwing up.
So I followed few steps on at XDA.. How to fix my phone.. So I got my phone on stock rom and also I got the new update OTA FP1.
Well guy's I need some help on rooting this phone with the new update stock OTA FP1 rom.
The person who help me on rooting my phones he left to a church mission at south Africa.
Could any one please guide me on steps on rooting this phone on the new stock Rom (FP1) rooted also includes radios, kernel.
Please I need help guides steps with this phone issues because I'm not great person on rooting.
Sent from my SCH-I510 using xda premium
sgtkillspot said:
Hello there guy's I'm new with rooted charge phones. Well guy's last night I did a stupid thing with my phone.. I accidentally updates my phone with the new OTA FP1 with rooted rom. Well guy's now my phone is screwing up.
So I followed few steps on at XDA.. How to fix my phone.. So I got my phone on stock rom and also I got the new update OTA FP1.
Well guy's I need some help on rooting this phone with the new update stock OTA FP1 rom.
The person who help me on rooting my phones he left to a church mission at south Africa.
Could any one please guide me on steps on rooting this phone on the new stock Rom (FP1) rooted also includes radios, kernel.
Please I need help guides steps with this phone issues because I'm not great person on rooting.
Sent from my SCH-I510 using xda premium
Click to expand...
Click to collapse
Follow direction #5:
http://forum.xda-developers.com/showthread.php?t=1560117
re
I was fuclking frustrated when trying to CWM / ROOT / CUSTOM rom my charge.
I have rooted and installed more roms than i can shake a stick at with my other phones.
But the lack of information on sooooo many of the dev threads that leave out soooooooooooooooooooooooo much info made my head spin.
First of all.
Odin is a program that you can install clockword mod with, as well as some custom roms.
Clockwork mod is a recovery / install tool that you install to be able to install custom roms and packages.
Even installing clockwork mod is a hassle, often you have to install it with odin and select, dont auto reboot. then pull the usb and then the battery.. then you have to hit the VolumeUp button + power + home to get into cwm.. and hopefully it will stick..
Once you get cwm installed you have to download a rom..
There are many of them, i went with a package that you load via odin instead of installing from clockwork mod.
i went with a package that was a stock 2.3.6 with root.
after i installed it, it was recommended that you wipe devlink cache, system cache.
finally after i rebooted i finally had a rom that was rooted.
This was after 2+ hours of searching through threads, downloading way too much crap and swearing at my computer for the lack of quality directions.
Usually XDA is rife with STICKYS that are easy to follow.
The charge forum is quite the opposite.
If i was not tired / drunk and frustrated i would post a correct HOW TO thread.. that i would imagine would not get stickied.
sprintrjm said:
I was fuclking frustrated when trying to CWM / ROOT / CUSTOM rom my charge.
I have rooted and installed more roms than i can shake a stick at with my other phones.
But the lack of information on sooooo many of the dev threads that leave out soooooooooooooooooooooooo much info made my head spin.
First of all.
Odin is a program that you can install clockword mod with, as well as some custom roms.
Clockwork mod is a recovery / install tool that you install to be able to install custom roms and packages.
Even installing clockwork mod is a hassle, often you have to install it with odin and select, dont auto reboot. then pull the usb and then the battery.. then you have to hit the VolumeUp button + power + home to get into cwm.. and hopefully it will stick..
Once you get cwm installed you have to download a rom..
There are many of them, i went with a package that you load via odin instead of installing from clockwork mod.
i went with a package that was a stock 2.3.6 with root.
after i installed it, it was recommended that you wipe devlink cache, system cache.
finally after i rebooted i finally had a rom that was rooted.
This was after 2+ hours of searching through threads, downloading way too much crap and swearing at my computer for the lack of quality directions.
Usually XDA is rife with STICKYS that are easy to follow.
The charge forum is quite the opposite.
If i was not tired / drunk and frustrated i would post a correct HOW TO thread.. that i would imagine would not get stickied.
Click to expand...
Click to collapse
Hey bro, no need to get frustrated, you tried too hard to learn all at once. Let talk about what you have on your phone and what you want to achieve? I will take you through step by step.
Another thing I want to clear with you about Odin and CWM. They both are two useful tools to flash rom/kernel etc.. If kernel or full rom image are created in a ZIP format or extension, you use cwm. If a rom/kernel created in a MD5 format or extension, you would use Odin.
For example; the new FP1 kernel was made in both format so you have a choice to use either to flash.
Summary:
1. If the file ended with ZIP extension like "FP1_kernel.ZIP", you would use CWM to flash.
2. If the file ended with MD5 extension like "FP1_kernel.MD5", then you would use Odin to flash.
In order to use cwm, it has to be installed on your phone. cwm was created in MD5 extension, so you need to use Odin to install cwm to your phone. Once cwm installed on your phone, in order to access it, you need to hold Vol up+home+power button to get to it, then you can use it to flash zip file.
Odin is an execution PC file (.exe), you download and install on your PC and it used to flash MD5 file. In order for Odin to talk to your phone, you have to put your phone in "download mode". By remove battery, plug in usb cable between your PC and phone, press Vol down button, this will put your phone in download mode, now you re insert battery back to ensure a stable data transfer between your PC and phone. Without put back battery, data transfer may fail. After this, Odin is ready to flash Md5 file to your phone.
Like I said, let me know what's on your phone and what you want to achieve, I can help you step by step to get it done. After you have some practice, you will understand what involved and how to use them. Cheers!!!
re
yeah.. i should have just read through the forums a day or so to figure out the odin / rooting / rom process for this phone.
But i am a seasoned vet in the android world and got pretty frustrated, mainly because a few of the other xda forums made me a little jaded by the process.
I have a fully functioning 2.3.6 rooted charge with CWM and the edited build prop to keep the Unwanted ota updates from bugging me.
Thanks for not flaming the f-out of me.
BTW have yall come across a thread about sandblasting or sandpapering the back cover of the phone to make it less slippery? I have sweaty f-ing hand, i know gross, but its a slippery phone for me.
sprintrjm said:
yeah.. i should have just read through the forums a day or so to figure out the odin / rooting / rom process for this phone.
But i am a seasoned vet in the android world and got pretty frustrated, mainly because a few of the other xda forums made me a little jaded by the process.
I have a fully functioning 2.3.6 rooted charge with CWM and the edited build prop to keep the Unwanted ota updates from bugging me.
Thanks for not flaming the f-out of me.
BTW have yall come across a thread about sandblasting or sandpapering the back cover of the phone to make it less slippery? I have sweaty f-ing hand, i know gross, but its a slippery phone for me.
Click to expand...
Click to collapse
Not a problem, you can get a back cover from ebay for a few bucks and it will do the trick.
Seems like you already knew how to handle cwm, why don't you flash (using cwm) FP1 eclipse rom, kernel and radio, so you will be on the latest O/S?
Hi. I am having trouble finding the clockwork mod for this device on this forum. I found some instrucions on the cyanogen mod forum with an oficial rom from them. Which one anyone suggest me? roms from the forum or cyanogens 7. im searching for an ics rom..
Sent from my SAMSUNG-SGH-I897 using Tapatalk 2 Beta-5
The hard way is usually what new owners of the Captivate learn, and fast, like I did over the past week or so. I ended up:
- getting the i897uckk4 Odin One Click - Stock ROM and flashing that so it was fully updated (at least as far as the AT&T stock stuff is concerned)
- located the Odin3 v1.85 flasher
- flashed the captivate-recovery-cwm5-kernel.tar onto the Captivate (it's the stock KK4 kernel with CWM 5 ready to go)
- then used CWM to update/upgrade from a bunch of ROMs, currently using Doc's Master beta v9, but I've tried about 10 ROMs in the past few days, this one is working fine at the moment aside from some ROM Control FC issues, but it's beta obviously
That should get you going. Found all the files here by searching, use the names I just mentioned above to locate them as I didn't save individual links, sorry.
Hope this helps...
Thank U Very Much
br0adband said:
The hard way is usually what new owners of the Captivate learn, and fast, like I did over the past week or so. I ended up:
- getting the i897uckk4 Odin One Click - Stock ROM and flashing that so it was fully updated (at least as far as the AT&T stock stuff is concerned)
- located the Odin3 v1.85 flasher
- flashed the captivate-recovery-cwm5-kernel.tar onto the Captivate (it's the stock KK4 kernel with CWM 5 ready to go)
- then used CWM to update/upgrade from a bunch of ROMs, currently using Doc's Master beta v9, but I've tried about 10 ROMs in the past few days, this one is working fine at the moment aside from some ROM Control FC issues, but it's beta obviously
That should get you going. Found all the files here by searching, use the names I just mentioned above to locate them as I didn't save individual links, sorry.
Hope this helps...
Click to expand...
Click to collapse
Thank U Very Much, Your guild is awesome worked the 1st time, I been trying for 3 days NOW, THANK U SO Much.
Clockwork mod is a recovery kernel replacement which allows flashing of unsigned zip files. You flash or "reinstall packages" as an update.zip from the original recovery. This roots the phone and installs Clockwork recovery.
Flashing roms without knowing the three button method to get into recovery or the button combo to get into download mode could spell trouble for people who are just learning about rom flashing.
It takes a few months of reading threads until a level of understanding is reached where you can flash roms and get out of trouble on your own.
br0adband said:
The hard way is usually what new owners of the Captivate learn, and fast, like I did over the past week or so. I ended up:
- getting the i897uckk4 Odin One Click - Stock ROM and flashing that so it was fully updated (at least as far as the AT&T stock stuff is concerned)
- located the Odin3 v1.85 flasher
- flashed the captivate-recovery-cwm5-kernel.tar onto the Captivate (it's the stock KK4 kernel with CWM 5 ready to go)
- then used CWM to update/upgrade from a bunch of ROMs, currently using Doc's Master beta v9, but I've tried about 10 ROMs in the past few days, this one is working fine at the moment aside from some ROM Control FC issues, but it's beta obviously
That should get you going. Found all the files here by searching, use the names I just mentioned above to locate them as I didn't save individual links, sorry.
Hope this helps...
Click to expand...
Click to collapse
Thanks alot..im going to try that now and se how it goes
Sent from my SAMSUNG-SGH-I897 using Tapatalk 2 Beta-5
askpcguy said:
Clockwork mod is a recovery kernel replacement which allows flashing of unsigned zip files. You flash or "reinstall packages" as an update.zip from the original recovery. This roots the phone and installs Clockwork recovery.
Flashing roms without knowing the three button method to get into recovery or the button combo to get into download mode could spell trouble for people who are just learning about rom flashing.
It takes a few months of reading threads until a level of understanding is reached where you can flash roms and get out of trouble on your own.
Click to expand...
Click to collapse
Ive been flashing for a while now. I have a galaxy fit rooted and with clockwork..i was just asking because i want to now if i do this will it take away my currently settings..since i network unlocked it and am currently using it with claro.. Im on stock rooted 2.3.5 uckk4 unlocked network
Sent from my SAMSUNG-SGH-I897 using Tapatalk 2 Beta-5
br0adband said:
The hard way is usually what new owners of the Captivate learn, and fast, like I did over the past week or so. I ended up:
- getting the i897uckk4 Odin One Click - Stock ROM and flashing that so it was fully updated (at least as far as the AT&T stock stuff is concerned)
- located the Odin3 v1.85 flasher
- flashed the captivate-recovery-cwm5-kernel.tar onto the Captivate (it's the stock KK4 kernel with CWM 5 ready to go)
- then used CWM to update/upgrade from a bunch of ROMs, currently using Doc's Master beta v9, but I've tried about 10 ROMs in the past few days, this one is working fine at the moment aside from some ROM Control FC issues, but it's beta obviously
That should get you going. Found all the files here by searching, use the names I just mentioned above to locate them as I didn't save individual links, sorry.
Hope this helps...
Click to expand...
Click to collapse
Soooo sorry to bother, but I'm at my wits end trying to root and remod my new captivate. The last one crapped out on me, so I was able to get a replacement, but I don't remember flashing it being this hard 6 months ago...lol! Anyway, here's my current stats and what I'm looking for:
Firmware: 2.3.5
Baseband: I897UCKK4
Kernel: 2.6.35.7-I897UCKK4-CL614489
Build: Gingerbread.UCKK4
I can if need be flash it back to 2.1 with Odin, but I followed your instructions, and now I'm stuck. I can't for the life of me find the captivate-recovery-cwm5-kernel file anywhere, on here or elsewhere. I don't even think the phone is rooted now, which is very strange because I was able to flash it, but anyway...any help would be greatly appreciated! Thanks in advance!!
I can't upload the Odin One Click ROM, it's too much for my current situation, but here's the captivate-recovery-cwm5-kernel.tar file:
http://dl.dropbox.com/u/19019338/captivate-recovery-cwm5-kernel.tar
MD5: 8464e7cee89c7364d62b760c28a4ca73
File size: 6,359,040 bytes
and here's Odin v1.85 if you don't have it:
http://dl.dropbox.com/u/19019338/Odin3_v1.85.zip
MD5: 9a81990a61454402e8714f494bb4eb68
File size: 204,173 bytes
Now, the basics are thus so pay attention:
Since Samsung is never going to release a proper ICS build for us, from what I understand - let me repeat that: from what I understand everything is working with Gingerbread bootloaders, so that's the important aspect. Before you go flashing anything, you'll need to get the Captivate OFF Froyo of any version if you're still using it. So, update that thing using Samsung Kies to the latest version which is that KK4 ROM - that's all that's required.
Once you're done that, and you're "stock" then you would flash the captivate-recovery-cwm5-kernel.tar kernel using Odin (run Odin with Admin privilege, put the Captivate in download mode, connect it, when detected, click the PDA button in Odin to load that captivate-recovery-cwm5-kernel.tar file, then Start to flash it). Once that's done you have the same kernel for KK4 but with CWM ready to go when you are with a proper GB bootloader and you're set.
The only reason I mentioned the Odin One Click above was because I did a few things that "pooched" my Captivate and soft-bricked it at one point but recovered it with Odin and the One Click when Kies couldn't do anything at all. There's a thread around here with all the Odin One Click ROMs, that's where I got mine from.
tl;dr version:
- if you're running any Froyo anything, use Kies to do the upgrade to Gingerbread, NOT the Odin One Click. Kies will update the bootloader from Froyo to GB as required (the Odin One Click was part of what caused my soft-brick, so I learned from the experience)
- if you're already running any Gingerbread ROM, you already have the GB bootloader, so you can use the Odin One Click to go to a pure stock AT&T basic clean ROM as mentioned above
- once you're "stock" use Odin v1.85 to flash the captivate-recovery-cwm5-kernel.tar so you get the same stock kernel but CWM as well
- use CWM to install whatever ROM you want from that point on making sure the ROM archive(s) and any updates or whatever are copied to the internal storage
Personal suggestion: remove the microSD card from the Captivate before doing any flashing at all. Yes it's possible to read from that device (called the external SD in CWM), I simply don't recommend it, ever.
That's about it. The Odin One Click KK4 is not rooted, iirc, I can't say for certain at this moment either way. I only used it a few times to "save" me from the soft-brick. Now that CWM is in there, I've jumped from ROM to ROM over the past week or so but Doc's Master v8 is my fall back stable one so far. Obviously when you load a ROM, look at the Apps and if you don't see SU or SuperUser, it's not rooted.
br0adband said:
I can't upload the Odin One Click ROM, it's too much for my current situation, but here's the captivate-recovery-cwm5-kernel.tar file:
http://dl.dropbox.com/u/19019338/captivate-recovery-cwm5-kernel.tar
MD5: 8464e7cee89c7364d62b760c28a4ca73
File size: 6,359,040 bytes
and here's Odin v1.85 if you don't have it:
http://dl.dropbox.com/u/19019338/Odin3_v1.85.zip
MD5: 9a81990a61454402e8714f494bb4eb68
File size: 204,173 bytes
Now, the basics are thus so pay attention:
Since Samsung is never going to release a proper ICS build for us, from what I understand - let me repeat that: from what I understand everything is working with Gingerbread bootloaders, so that's the important aspect. Before you go flashing anything, you'll need to get the Captivate OFF Froyo of any version if you're still using it. So, update that thing using Samsung Kies to the latest version which is that KK4 ROM - that's all that's required.
Once you're done that, and you're "stock" then you would flash the captivate-recovery-cwm5-kernel.tar kernel using Odin (run Odin with Admin privilege, put the Captivate in download mode, connect it, when detected, click the PDA button in Odin to load that captivate-recovery-cwm5-kernel.tar file, then Start to flash it). Once that's done you have the same kernel for KK4 but with CWM ready to go when you are with a proper GB bootloader and you're set.
The only reason I mentioned the Odin One Click above was because I did a few things that "pooched" my Captivate and soft-bricked it at one point but recovered it with Odin and the One Click when Kies couldn't do anything at all. There's a thread around here with all the Odin One Click ROMs, that's where I got mine from.
tl;dr version:
- if you're running any Froyo anything, use Kies to do the upgrade to Gingerbread, NOT the Odin One Click. Kies will update the bootloader from Froyo to GB as required (the Odin One Click was part of what caused my soft-brick, so I learned from the experience)
- if you're already running any Gingerbread ROM, you already have the GB bootloader, so you can use the Odin One Click to go to a pure stock AT&T basic clean ROM as mentioned above
- once you're "stock" use Odin v1.85 to flash the captivate-recovery-cwm5-kernel.tar so you get the same stock kernel but CWM as well
- use CWM to install whatever ROM you want from that point on making sure the ROM archive(s) and any updates or whatever are copied to the internal storage
Personal suggestion: remove the microSD card from the Captivate before doing any flashing at all. Yes it's possible to read from that device (called the external SD in CWM), I simply don't recommend it, ever.
That's about it. The Odin One Click KK4 is not rooted, iirc, I can't say for certain at this moment either way. I only used it a few times to "save" me from the soft-brick. Now that CWM is in there, I've jumped from ROM to ROM over the past week or so but Doc's Master v8 is my fall back stable one so far. Obviously when you load a ROM, look at the Apps and if you don't see SU or SuperUser, it's not rooted.
Click to expand...
Click to collapse
Thanks dude... I only have one question in all this. I network unlock my phone when it was on eclair, i updated to ginger via kies and it stayed unlock will i loose the unlock if i installed cmw and any rom?
Sent from my SAMSUNG-SGH-I897 using Tapatalk 2 Beta-5
Jose0726 said:
Thanks dude... I only have one question in all this. I network unlock my phone when it was on eclair, i updated to ginger via kies and it stayed unlock will i loose the unlock if i installed cmw and any rom?
Sent from my SAMSUNG-SGH-I897 using Tapatalk 2 Beta-5
Click to expand...
Click to collapse
Can't say on that respect, mine is not even being used as a phone, actually - it's basically a DAP/PMP/PocketPC for me.
Still can't find a service provider with a decent plan that I'd be willing to fork over some money for so, until I find one (if I ever do), this Captivate of mine won't even have a SIM in it.
You won't loose network unlock ever unless your EFS gets modified in anyway...
Sent from my SGH-I897 using xda premium
br0adband said:
I can't upload the Odin One Click ROM, it's too much for my current situation, but here's the captivate-recovery-cwm5-kernel.tar file:
http://dl.dropbox.com/u/19019338/captivate-recovery-cwm5-kernel.tar
MD5: 8464e7cee89c7364d62b760c28a4ca73
File size: 6,359,040 bytes
and here's Odin v1.85 if you don't have it:
http://dl.dropbox.com/u/19019338/Odin3_v1.85.zip
MD5: 9a81990a61454402e8714f494bb4eb68
File size: 204,173 bytes
Now, the basics are thus so pay attention:
Since Samsung is never going to release a proper ICS build for us, from what I understand - let me repeat that: from what I understand everything is working with Gingerbread bootloaders, so that's the important aspect. Before you go flashing anything, you'll need to get the Captivate OFF Froyo of any version if you're still using it. So, update that thing using Samsung Kies to the latest version which is that KK4 ROM - that's all that's required.
Once you're done that, and you're "stock" then you would flash the captivate-recovery-cwm5-kernel.tar kernel using Odin (run Odin with Admin privilege, put the Captivate in download mode, connect it, when detected, click the PDA button in Odin to load that captivate-recovery-cwm5-kernel.tar file, then Start to flash it). Once that's done you have the same kernel for KK4 but with CWM ready to go when you are with a proper GB bootloader and you're set.
The only reason I mentioned the Odin One Click above was because I did a few things that "pooched" my Captivate and soft-bricked it at one point but recovered it with Odin and the One Click when Kies couldn't do anything at all. There's a thread around here with all the Odin One Click ROMs, that's where I got mine from.
tl;dr version:
- if you're running any Froyo anything, use Kies to do the upgrade to Gingerbread, NOT the Odin One Click. Kies will update the bootloader from Froyo to GB as required (the Odin One Click was part of what caused my soft-brick, so I learned from the experience)
- if you're already running any Gingerbread ROM, you already have the GB bootloader, so you can use the Odin One Click to go to a pure stock AT&T basic clean ROM as mentioned above
- once you're "stock" use Odin v1.85 to flash the captivate-recovery-cwm5-kernel.tar so you get the same stock kernel but CWM as well
- use CWM to install whatever ROM you want from that point on making sure the ROM archive(s) and any updates or whatever are copied to the internal storage
Personal suggestion: remove the microSD card from the Captivate before doing any flashing at all. Yes it's possible to read from that device (called the external SD in CWM), I simply don't recommend it, ever.
That's about it. The Odin One Click KK4 is not rooted, iirc, I can't say for certain at this moment either way. I only used it a few times to "save" me from the soft-brick. Now that CWM is in there, I've jumped from ROM to ROM over the past week or so but Doc's Master v8 is my fall back stable one so far. Obviously when you load a ROM, look at the Apps and if you don't see SU or SuperUser, it's not rooted.
Click to expand...
Click to collapse
Thank you SO much for the links and all the time you put in to the explanation. I followed your suggestions, and now I'm running ICS Cyanogenmod 9 in dazzling full color!! You've made what could potentially be a very complicated process extremely easy...I wish I could thank your post 10-fold!! How is your ROM on battery life, btw? I was running CM 7 on my other Captivate, and it wasn't all that great on the battery...waiting to see how 9 works, but my girlfriend still insists it was because I had "too much junk" on the phone...lol! Thanks again!!
Battery life using Doc's Master v8 is as expected, didn't do any extended testing with the CM9 nightly, but then again I'm on the original Samsung stock battery too so, it doesn't hold a full charge anymore like a brand new one would.
I'm hoping to get some cash together soon to get that Anker 2-pack w/charger on Amazon (the 1800 mAh batteries that everyone raves about). I thought about getting the 3500 mAh monster extended on off eBay but, as I'm still trying to locate that Trident Cyclops case (which you just sent me 2 PMs about, thanks), I figure having 2 batteries instead of one would still be a more efficient solution while still being able to keep the Captivate in a nice protective case.
Maybe I need to do some guides for people and put up a donate button to get me some batteries and that case, who knows.
Glad the instructions proved useful.
br0adband said:
Battery life using Doc's Master v8 is as expected, didn't do any extended testing with the CM9 nightly, but then again I'm on the original Samsung stock battery too so, it doesn't hold a full charge anymore like a brand new one would.
I'm hoping to get some cash together soon to get that Anker 2-pack w/charger on Amazon (the 1800 mAh batteries that everyone raves about). I thought about getting the 3500 mAh monster extended on off eBay but, as I'm still trying to locate that Trident Cyclops case (which you just sent me 2 PMs about, thanks), I figure having 2 batteries instead of one would still be a more efficient solution while still being able to keep the Captivate in a nice protective case.
Maybe I need to do some guides for people and put up a donate button to get me some batteries and that case, who knows.
Glad the instructions proved useful.
Click to expand...
Click to collapse
Could any one give me a link to the cm9 ics. I recently flashed aokp and dark night but couldnt use my phone as i got a no network message and when try to ad apns settings were not saving :/
Sent from my SAMSUNG-SGH-I897 using Tapatalk 2 Beta-5
http://goo.im/cm/captivatemtd/nightly
Bottom of the list, and apparently a new nightly was just posted a short time ago (20120412) so... time for a backup and a flash to see what's changed.
And also remember to get the latest Gapps from that site as well when flashing CM (which is 20120317)
http://goo.im/gapps
Hey everyone,
I'm new to the unlocking of android world and I need some guidance as to the process on unlocking a phone properly to minimize the chance of bricking the phone.
I have a Motorola RAZR HD XT925 and its just running so horrible. When I connect to Wifi, the phone gets hot and it lags for days. When I'm not on Wifi it still gets its episodes of running so... slow... It is a constant daily piss off and a struggle. I have been trying to read up on the step by step process on unlocking an android phone but I just cant find out the whole process and quite frankly, I'm a little confused as to when to flash certain things. If you guys can help me on the following:
1. The process laid out in steps
2. Best way to backup my phone (copying photos/videos, etc onto computer?)
3. When to root
4. When/how to flash boot loader
5. Which custom ROM is best for my phone which gives tweakability (new english word)
I found this link to a forum discussion on this site here http://forum.xda-developers.com/showthread.php?t=2247250. I am unsure what do to with all of it and where to start.
My phone is incredibly frustrating at the moment. I keep the phone clean so Im not sure why its acting like a 1980's prototype. I just want all factory **** off and my own custom ROM on it so it can run the way it should.
Thank you all in advance.
Hey, no worry. The best way to back up a phone's internal memory is a nandroid back up and before flashing a custom rom back up your sdcard to your pc. Use cwm recovery to backup the os and all the apps installed on your phone.
When you press the vol+, home and power button your phone goes into recovery mode. From there you need to select apply update from sd card and browse your sd card for cwm.zip file. Use the volume buttons to scroll up and down and the home button to go back to the previous menu. The cwm recovery mode will have an option to backup your phone. Now, before flashing a custom rom download odin packages. These are official firmwares which are flashed via pc. The process is quite easy. Its not essential but advisable since they can help you to recover your phone should you brick it.
Cwm is vital in flashing custom roms. And custom roms are vital in our day to day life. And you really should get rid of that os. Each custom rom has advantages and drawbacks. Read the threads carefully to see if anyone had any problem. Experiment with different roms that have little or no problems. Dont test out new roms that are in development stage until you have got hang of things. Choosing a custom rom is upto the user. Download and try out till you find the right one. All custom roms that i have known are pre rooted. Otherwise it would have been just a factory os. Its very important that you read the instructions carefully when flashing a rom. I really dont know much about bootloader since i never flashed it and i have had my share of experience with custom roms. Dont know if bootloader is essential
Okay so, I love my Infuse but getting really tired of not being able to download anything off the play store. Just tired of it's rather less than great performance right now as well. It's is running 2.3.6 GB and want to get this thing up to ICS if possible. Just something running 4.0 so I can use my phone for what I need too. It is not rooted, no cyanogenMod, NOTHING. As the title says, I'm a full on noob here and I apologize if all this is covered in other threads, however I have just gotten to the point where I have found myself even more lost than where I started on what I needed to do/get. If someone can, I will literally need this spelled out to me (no pun intended), in order of the steps I need to take with everything. I'm getting tired of confusing myself even more from all the different stuff I have seen all over the place and I know without some serious guidance, I will just brick my phone. Thanks for any help! :laugh:
I understand this community can be a bit unorganized and confusing so I'll give you my process for rooting and installing custom firmware (there are other ways, but this works for my AT&T Infuse 4G SGH-i997).
First of all, no one uses ICS on the Infuse. There is a ROM, but it's underdeveloped because JB came out so quick. You will need to flash it to get to higher operating systems, but it is by no means a daily driver. Even JB is a little buggy compared to KitKat on the Infuse these days.
The first thing you want to do is root your phone and get a custom recovery.
There are more than a few options for rooting, but I prefer using ODIN (as I understand it, this is the tool Samsung uses to restore soft bricked phones). So this is a good thing to know how to do, in case you ever do soft brick your phone, you'll know exactly what to do.
Read the ODIN instructions in full as I will only briefly explain.
You're going to have to install Samsung drivers.
You'll be using UCLB3_Unbrick_root_1.1.zip. If you used UCLB3_Unbrick_1.1.zip it would just get you back to stock GB with no root added.
To put your phone into download mode, first turn off your phone. Plug a usb cable into your computer. Then with the phone off, hold down both volume buttons and plug the usb cable into your phone. A warning will come up and you push volume up to accept, realizing that you can easily soft brick your phone if you loose power or unplug during a download.
Once downloading is done, the phone will reboot and you'll be disappointed to see that nothing has changed. Except one small thing, you are now rooted and you should have an application called SuperUser that will allow you to do nifty and also dangerous things.
Now follow this step in the ODIN instructions to add the custom recovery (CWM = Clock Work Mod):
The version with root works exactly like the above version, but adds root. To add CWM recovery to the rooted version, download a custom Gingerbread kernel from HERE or HERE and flash the zImage using SGS Kernel Flasher (found in the Play Store) on the phone. If you go this route for root and CWM, your Custom Binary Download counter will not show any custom binary activity.
Click to expand...
Click to collapse
If you follow the link in the second "HERE," you'll get the kernel I prefer since it was most recently updated. Scroll down the downloads section and grab "2013.04.30-CWM-Synthesis-1.2Ghz.zip." (1.2Ghz is stock for our processor, anything higher will be overclocked which I don't recommend).
Extract that and grab the zImage file in the update folder. You're going to copy this to your phone in a second.
But first you need SGS Kernal Flasher, you can get it off the playstore, but I despise having to log in to an OS I'm going to write over in less than a minute so I download the APK from here. Hopefully you know how to install APKs from your SD card and that you'll have to check install from unknown sources.
Now flash the zImage using SGS Kernel Flasher. Your phone will reboot and hang on the Samsung logo and a creepy voice is going to tell you about how she's partitioning your phone and installing Voodoo lag fix. This is normal. Eventually your phone will reboot back into GB and you'll be ready to flash any ROM of your choice by rebooting into recovery.
You reboot into recovery by holding the volume up and volume down button while powering on the phone. This is different than download mode and will take you do a new screen that you control with the volume keys.
You'll be using this to put new software on your phone.
Now you can bassically follow the instructions for getting to CyanogenMod 11 (Kit Kat) from GB.
The first bullet is what I just explained in detail.
Note that I didn't include the links in these instructions, just follow the link above to get to the original post.
Obtain CWM, this can be done using Jscotts Odin back to stock (Follow instructions and use SGS kernal flasher to obtain CWM)
Run Qksters IMEI backup script here
Make certain you are on ICS, this can be done by flashing Entropy's CM9
It is recommended now that you remove your SD Card
CWM: Wipe Cache / Factory Reset
Install ROM: Scroll down for downloads sectoion
... The package will start to install..
... Phone will reboot into the install screen again...
... Continue to install [Automatically] If not manually flash again
... Phone will reboot again and be at the recovery screen...
Install Gapps: Here - Working swipe!
CWM: Wipe Cache Partition
CWM: Advanced/Wipe Dalvik Cache
Reboot
Click to expand...
Click to collapse
To be clear, when you flash a ROM, it won't be like flashing the zImage (that was just to get custom recovery). To flash the CM9 ROM or Qksters IMEI backup script for example, you leave the rom in the .zip file and simply put it on your SD card. Once in the recovery screen, you select "Install Update from ZIP" and navigate to the particular ROM you wish to install.
Also after updating to a higher version of Android, your phone will sometimes hang on the install screen for a long time. If it does for more than five minutes, it's safe to pull the battery and try flashing again (and sometimes necessary).
After flashing Entropy's CM9, you will be on ICS, you can use if you want but I don't advise it. You should continue with the instructions and update to KitKat after getting to ICS. I recommend Scott's CM11 (what I linked you to) or Scott's BeanStalk (find it in the Android Development Section).
Lately I've been using CyanFox and I have to say, it's the most stable ROM I've used in a while.
If you have any questions about this, feel free to ask.
Best of luck and happy flashing,
~bokonon9
Thank you muchness!
Thank you very much for helping me in this mess! I greatly appreciate it. I love my Infuse and do not want to get rid of it quite yet so hopefully this will help! Once I get a new usb cord I will get on this. My toddler decided to get a hold of it and it has to set a certain way now and can't be moved. This, is no bueno! Anyways, THANKS AGAIN!!! :laugh:
Goodluck! :laugh: :good:
I'm new in the android world and I'm using a nexus 7 and an infuse to make experiments just to learn.
bokonon9, thank you! You're guide has been precious to me.
Unfortunately I only succeeded installing ICS, infact I get till here:
After flashing Entropy's CM9, you will be on ICS, you can use if you want but I don't advise it. You should continue with the instructions and update to KitKat after getting to ICS. I recommend Scott's CM11 (what I linked you to) or Scott's BeanStalk (find it in the Android Development Section).
Click to expand...
Click to collapse
I tried to install CM11 and even CM10 at least half a dozen times each, following step by step the instructions that I've found on the thread but all the times I have the same issue:
after the zip rom update and the reboot, the bootloader keeps launching the CWM recovery. I see the logo, the progress bar and then I land in recovery
I don't get any kind of error (and I don't know where to look for to get more information than what's shown on the screen) and I'm just stuck in the recovery and I have to start from scratch every time using Odin all the way down.
I'm not interested in Gapps so, at the beginning I tried without installing them but then I tried also using the appropriate gapps as indicated in the procedure. Either way I didn't get any solution to my problem.
Do you have an idea? Is there a way for me to provide more information or debug?
Thank you!
wwr said:
I'm new in the android world and I'm using a nexus 7 and an infuse to make experiments just to learn.
bokonon9, thank you! You're guide has been precious to me.
Unfortunately I only succeeded installing ICS, infact I get till here:
I tried to install CM11 and even CM10 at least half a dozen times each, following step by step the instructions that I've found on the thread but all the times I have the same issue:
after the zip rom update and the reboot, the bootloader keeps launching the CWM recovery. I see the logo, the progress bar and then I land in recovery
I don't get any kind of error (and I don't know where to look for to get more information than what's shown on the screen) and I'm just stuck in the recovery and I have to start from scratch every time using Odin all the way down.
I'm not interested in Gapps so, at the beginning I tried without installing them but then I tried also using the appropriate gapps as indicated in the procedure. Either way I didn't get any solution to my problem.
Do you have an idea? Is there a way for me to provide more information or debug?
Thank you!
Click to expand...
Click to collapse
i would say go back to stock gb with odin and basically start over but with ics i always let it reboot to get a "feel" for it then i reboot to recovery and wipe basically everything then flash the next level of android which should be cm 10 then i let that boot then repeat that to get to kitkat 4.4.3 CarbonRom....sometimes you have to flash the same rom twice to get it to flash tho
I already tried all that and I can't figure out a way out ... I'm really banging my head against the wall
wwr said:
I already tried all that and I can't figure out a way out ... I'm really banging my head against the wall
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2091900&page=370
read the last post on that page by scmfxt