[Q] Something weird happend yesterday... - Windows Phone 7 Q&A, Help & Troubleshooting

So yesterday A notification showed that my ebay acc has been hacked or smth I couldn't read it because I closed it fast (by mistake) and after that almost none of my apps worked. I mean for example I start weather bug from its live tile then it went into blank screen and got me back on my menu. This happened with 90% of my apps, even with compass youtube etc... So I hard resetted the phone. Then connected it to the computer and an update showed up. So I updated it (again mistake) and my last backup is gone now... So my phone is unhacked and I want to hack it again. What should I do

Moving to Q&A......
Sent From My Fingers To Your Face.....

maybe this works out:
you could flash it with a new rom, unlock it by chevron, apply the no-relock hack
afterwards update to pre-nodo and nodo
zune should then make a backup of the previous state...
cheers,
simon

Ok can you give me a link to a hd 7 clean europe rom cuz there are lots of them in the development section and I dont know which will be the correct one. ty in advance

as I have a omnia 7, I never dealed with other roms than for samsung devices...
sorry that I can't help you out on this...

Related

accelerometer not working

I'm not sure it has to do with this, but I flashed my NAND with nandroid with one from a different G1.
and one of the axes in the accelerometer doesn't work at all (its stuck).
any idea how to fix this ? (again,i'm not sure the nand has to do with this)
I had the same problem and ended up just doing a whip and setting everything back up. I had a black G1 that I traded for a White one. It might of also been that i flashed a different version of JF on it was well but wasnt worth the time to flash back to 1.41 nand retore and then flash to 1.42. It only really took me about 15 mins to reinstall all the apps and setup options.
i think i read somewhere that accalerometer doesnt work with nandroid.... mine stopped working this week- just did a wipe and a reflash and it works fine now.....
Can Someone help me? I was playing Labyrinth and when I finish, the accelerometer has stopped working. It does not work with anything, either games or any application. nybody know how to reactivate? Thanks.
PS. I Dont make any mod on G1. It is R33 version.
PS2: It never dropped.
Hmmmm, this happened out of the blue for me a long time ago. I think I had to reinstall the firmware, and maybe even a wipe. Been fine ever since...
-oldsk00lz
Accelerometer probelm - Just happened to my rooted rc33
Hey gents, this just happened to my rooted g1 yesterday.
The accelerometer now only works on one axis. I'm pretty sure its a software issue. I tested the accel using Api demo's OS/sensors. The one graphical output and the three dials at the top. The graph changes and registers the change when i rotate it but it just doesn't want to work with any programs that use the accel. ie labrynth, bubble level etc.
I'd really like to know what happened, what caused this. I didn't drop my phone or do anything of the sorts. I did max out my memory installing too many apps that day but I couldn't see that affecting it.
***re-installing is not an option if this constantly happens. I don't have a data plan to keep logging into the start screen every time I wipe my unit. I know there's a thread about getting around this but I'm still not to comfortable using the sdk.
I haven't tried to wipe and reinstall via recovery mode yet. I was wondering though,
1. how do i find out what version of jesus freak rc33 i have. I think Its 1.41 but I forget and just looking at the buildnumber i can't figure it out. and are the newer versions better should i be upgrading?
2. Is there anyway to fix this with a reinstall. Is there anyway to examine the accel. data readout or code.
3. If not, should i just try wiping and reinstalling the same version of jf rc33 or do i have to reinstall a packaged (oem) version of rc33 and loose root (i don't want that to happen,root is a necessity for me )
I'll glady post my findings and even write up the step step process. I just need some answers first.
Thanks for you help (your form seems to be the only place i get solid answers about my phone) http://forum.xda-developers.com/images/icons/icon10.gif
this happened to mine a while back. a wipe and reflash fixed it. use mybackup to quickly get back to where you were.
this just happened to me the other day i posted here about it but it might of been deleted as i was the only one to post and answered my own question through trial and error.
you might try the app bubble it might allow you to calibrate it (i didn't know this until i read it somewhere this morning) other than that when i had the issue i just reinstalled everything the old fashioned way one apk at a time although first you would need to alt+w in the loader menu then install the latest jf update

Can someone help me please?

Hi guys.. I have a samsung i600 (already pre-installed with WM 6 Standart)
I have been using this stuff for a year..
At the beginning, everything ran smooth.. But during the last 2 months, when I tried the windows-mobile update, it said that it can't connect to the update server.. and it's always does! at the beginning, it wasn't like that.. the update was always successful to connect, eventhough there was always no new update..
Is that something wrong with my phone's connection, or is microsoft closed the update server?
And one more simple problem, my original Lavender background turned into only a grey landscape background.. as I've tried to restore back the phone to factory settings, it still remain like that.. I guess something wrong with the master files.. How can I recover that? do I need to re-flush the WM6?
Thx guys.. I really need your help, the WM expert.. Sorry if I ask help for such a ridiculous matter.. I'm an amateur.. ^_^

enTourage eDGe Dualbook

I have an enTourage eDGe Dualbook that currently runs on Android 1.6.
I was wondering if the Android developers here have any insight into how to make applications that would apply to this device? I have an interest in making application such as a calender that will sync with Google, MSN and others. I also would like to figure out how to get Flash light on the Edge. It currently does not have Flash, but I know that other devices do have it.
Can anyone help?
I would like to do the same. I have the pocket edge running ermine
Sent from my edgejr using XDA Premium App
I have the same device but with beta ERMIN 0.9 (which is 2.2.1) i was wondering if there is any way to root it. and if its not too much trouble i would really like the market too.
Here is your answer! even if it has root idk about a custom rom or even a market
Android Police has an Article on how to root
OK, need help
After problem with market I tried lot of thing from xda to enable it, nothing worked and after I messed up with lot of things on it I "wisely" decidet to factory reset it.
I did not mentioned I rooted it before and removed some system apps with titanium backup pro
Now after reset everything worked fine till green screen of welcome and 11 steps I skipped all after conecting to wi-fi because there was no eDGe server to register me.
And after skip I got blank screen just with notification bar, after while it locked itself, unlocked it by slideing and still blank.
Like there is no Launcher app.
Now I would use update.zip for ermine but I am lost so many PE users and everything here about PE.
But I need EE original standard one, so please someone direct me to right link for matching update.zip for EE (not PE) and easy instructions because I do not remember anything how I did it last time.
Should I first downgrade to dingo than use update for ermine ???
Update: after shut down (it let me by long press rotation button) after I turn it on it stays in loop (EDGE logo with 4 dots).
resolved, loaded golden dingo then ermine.
wi-fi problem resolved by app but gapps dead for now.

Windows Phone 7 Error Code: C101002E

I have been having this error where the phone prevents itself from booting, showing a screen that tells you to connect to PC , for a while. Only way to fix it is to remove the battery and restart but that is just a temporary fix. What exactly is this? What causes it? Is it a software issue or a hardware issue? Should I get an exchange or do you guys think this will be fixed with the next update?
Thanks
Never seen that error message. I'd say reset once, if you see it again, get it exchanged.
Yea this my 4th HD7 it shows the error code when you plug it to the PC in zune. Funny thing is that I owned a speck case and I reboot the phone in the case till then. This time i pulled the battery out, put it back in and powered the phone on without the case and it is working fine. I guess the case is pushing down a button or sth and that prevents the phone from working properly. Very weird..
Hey there! I've been having the same error! This is my 2nd HD7, I own the Speck case and I do not think its the case. This issue is happening on mine with or without the case. Pulling out the battery just doesn't cut it. I have to:
1. Remove the battery
2. Plug the USB Charger
3. Insert the battery back
4. Turn on.
I love the phone but this is really frustrating!
Edit: Too bad I can't post the link to youtube due to member status. But the video is up just search for it "c101002e"
Just happened to me too. First day using the Speck case too and i let the battery drain till it died and upon reboot it showed the 'plug into computer' screen. Hope it is just the case causing problems.
did you all updated the sd card ?
you could try to reflash this rom (if you are on t-mobile USA ) http://forum.xda-developers.com/showthread.php?t=810346
Take this one "RUU_Schubert_TMOUS_1.20.531.01_Radio_5.51.09.11a_2 2.31.50.09_Signed_SCHUBERT_RELEASE"
its just the stock tmous rom .
Weird coincidence that all of y'all are using the same case. Maybe it is damaging on of the buttons?
nrfitchett4 said:
Weird coincidence that all of y'all are using the same case. Maybe it is damaging on of the buttons?
Click to expand...
Click to collapse
somewhere on the board they did tell that this case make the buttons really sensitive and it make the phone unusable .
theres a thread on tmobiles forums talking about the same issue, and most if not all the people there have the speck case. Someone says they tested it with and without the case and came to conclusion that the case is putting too much pressure on the camera button, which seems to be causing the problem.
would post the link to the other forum but i cant find it lol
pierce_m said:
theres a thread on tmobiles forums talking about the same issue, and most if not all the people there have the speck case. Someone says they tested it with and without the case and came to conclusion that the case is putting too much pressure on the camera button, which seems to be causing the problem.
would post the link to the other forum but i cant find it lol
Click to expand...
Click to collapse
Yea that was pretty much what was happening to mine. Although I remember trying to boot it without the case and having the same error before so what I did that I did a hard reset ( press power and both volume buttons at the same time) then when the phone booted, I rebooted it without the case immediately and its been working no problem since. I am pretty sure that case pushes the camera button since it grips the phone very tightly. I even overloaded the ram by opening lots of apps that runs in the background and then rebooted but it is working perfectly fine as of right now. Weird.. I am guessing its just a weird bug not a hardware defect.
I found it in a post in the mozart forums, so i tried it, as you do, cause its something new to play with cause my TP2 didnt like swimming, but anyway it was something about hoding down the camera button while power on, and it brought up a picture of a phone and cable and instructing you to plug it into a pc and when i did it started Zune and something about restoration error, so like in the previous posts it may be a stuck or faulty button somewhere on the phone that is causing it.
i didnt watch the video so if that had it in it never mind
cheers
Today 11 April 2011 I got notification about NoDo update for my phone.
It is HTC Mozart on Orange France network.
The pre-NoDo update was istalled about 20 days before.
The update got stuck at step 8. It seemed I had an unusable phone. In a periodic reboot mode into the update screen.
I checked on my W7 64 bit laptop the relevant backup folder, where all my phone data was supposed to have gotten backed up during the update. The folder was empty.
I therefore realized my phone got its rom corrupted during the update and I could not get back my pre-NoDo backup, since this latter was missing from my laptop.
Zune was on no help, stating a C101002E error.
The Windows Phone Support Tool was also of no use, reporting an error code while trying to restore my data.
XDA-forum provided me with a solution:
I went here
http://forum.xda-developers.com/showthread.php?t=1000781
and downloaded both bootloaders with relative roms.
After getting into the bootloader screen (red, green and blue screen), I installed the first ROM provided by Ansar. This could not install succesfully.
With the bootloader tool I could nevertheless confirm my idea I did not have anymore a functioning rom into my phone.
The second rom, the one ending with "Signed_by_ansar" could be succesfully installed.
I now have a Mozart fully functioning.
I had to restore my windows live account, Gmail, etc. My apps did not come back up after syncing with Zune.
I realized I just lost all my SMSs and home screen settings.
My phone was originally network unlocked and remained as such.
I got a notification that there is an official update for my phone the first time I rebooted. I will wait before attempting this update. The ROM by Ansar has got anyway copy/paste, being a NoDo ROM.
The ROM from Ansar, although for Orange France, removes the Orange splash screen when the phone starts. I guess if I need to use warranty on this phone right now I may have some issues with Orange France. Maybe when I update the phone following the update notification I got, I will re-establish a fully certified Orange ROM.
i9o pls and any one pls help me , i faced problem with [260] connection problem between my hd7 and pc vista 64 bit, actually i followed to steps in forum (error code C101002E) and drivers were installed (htc usb sync) before i started to flash rom NoDo bootloader 1, But no way still the problem [260]. i also tried another RUU htc asia xxx707xxx. because i have spl 1.23.2250.0(112138).also some links of RUU to download signed by ansar disappeared in rapid and other sourses, pls help to solve connection problem
Microsoft has release the Windows Phone Support Tool to fix this problem: http://support.microsoft.com/kb/2530409
WPS doesnt help in my case, Im malaysian and thought that need Asia RUU, but when i tried Europian RUU it nicely works, maybe because of i have 8G phone. the RRU is RUU_Schubert_HTC_Europe_1.69.401.01_Radio_5.54.09.21_22.33b.50.10_Signed_SCHUBERT_RELEASE(2)
day2die said:
Microsoft has release the Windows Phone Support Tool to fix this problem: http://support.microsoft.com/kb/2530409
Click to expand...
Click to collapse
Do you know what this tool does to the computer?
I would try it but honestly don't want to do it before I have info what it does to my PC settings. Unfortunately MS doesn't share with this knowledge.
Hi everyone!
I have a big problem with my new hd7.
Just bought, and wired for the very first charging but the phone continues to restart by itself.
Tried a hard reset, to set it in download mode and fix with Windows Phone Support Tool but still nothing to do. Even tried to install a new ROM but at the first start it continues with its loop.
In download mode zune tried to upgrade to nodo but it shows the error C101002E.
Don't know what else to do. Any idea? It's new!
MusicMan587 said:
Hi everyone!
I have a big problem with my new hd7.
Just bought, and wired for the very first charging but the phone continues to restart by itself.
Tried a hard reset, to set it in download mode and fix with Windows Phone Support Tool but still nothing to do. Even tried to install a new ROM but at the first start it continues with its loop.
In download mode zune tried to upgrade to nodo but it shows the error C101002E.
Don't know what else to do. Any idea? It's new!
Click to expand...
Click to collapse
No one had this problem? am i the only unlucky on the earth!?
Return for warranty replacement. Your phone is broken.
Thank you...i hoped i could solve it to not to wait september to have my phone back.

[Q] The Phone part of my Phone kind of doesn't work anymore!?

I've got this Samsung Focus on AT&T, the other day I decided to force the newest update. I made sure I had all the correct languages and everything. The update went through and most of the phone works. (cellular connection is indeed corruption, and I know about the fix for that.)
Basically what's happening is, the Phone liveTile shows the accumulated missed calls but when I tap on it, the animation freezes then goes back to the homescreen. I can call people through the People app or by using TellMe, and people can call me. I suppose the only thing I can't do is check to see who has called me.
Is this a known issue? Is there a fix? please let me know! as for the backup...
Apparently the backup I did got corrupted in some way, so there's no going back to that (the currently existing back up for some reason is after the update, though I haven't tried using it yet).
restart it. if doesn't work. reset the phone
Yeah, I definitely tried restarting it. I even ran the Samsung tools and that didn't fix anything (including my data issue... I tap on "cellular" in the settings and it doesn't open. ****e.) To modify a classic Bill Gates quote... "I guess that's why they're not shipping 8107 yet."
I think I have an old mango back up from the fall, but oh jeez, that's a lot of backtracking.
I'll keep refreshing this thread to see if any experts have any ideas for a little bit, after a while I'll just reset the phone I guess.
The phone app thing isn't a huge deal at the moment, but no cellular data?! How am I supposed to win arguments without a cellular data connection?
read the thread more carefully, and apply the correct updates - core os update is not enough...just read...please!
Bad update, you need correct language file, i had the same problem on my Titan... Phone live tile, in settings Mobile network etc doesnt work after bad update.
I had the following in my cab sender folder:
- diff-7.10.7720.68-7.10.7740.16-armv7-retail-microsoft.pks_2cb1bfdd82133914239b8ee1a78e61e9000d124a.cab
- diff-7.10.7740.16-7.10.8107.79-armv7-retail-microsoft.lang_0c0a.pks_97df86b81a40df06bb2b15c6739e2ee772e53bbf.cab
- diff-7.10.7740.16-7.10.8107.79-armv7-retail-microsoft.lang_040c.pks_2d74e8c5f6a835f1fe4c62b488c96ac2d7f01c29.cab
- diff-7.10.7740.16-7.10.8107.79-armv7-retail-microsoft.lang_0407.pks_b50019ef50d52090d408d854c0708ddbf520706c.cab
- diff-7.10.7740.16-7.10.8107.79-armv7-retail-microsoft.lang_0409.pks_bfd9c047a7b27c28208c8a717f8d7511fb2586f1.cab
- diff-7.10.7740.16-7.10.8107.79-armv7-retail-microsoft.lang_0410.pks_9ecf9b052b6cc3161462e998dac8204a0f754556.cab
- diff-7.10.7740.16-7.10.8107.79-armv7-retail-microsoft.pks_c9b7f3bc5bb340ba30473b566b4557de0cf3322e.cab
Will simple reapplying work perhaps? I mean, I'm pretty sure those are the only ones I needed, I did read the thread quite a few times.
Update reapplied and now it's working!!!!
Now I just need to figure out my internet sharing issue.

Categories

Resources