[Q] New to the android scene plz help - Samsung Galaxy S (4G Model)

This is my first android device (samsung galaxy s 4g sgh-t959v). I am already rooted thanks to superoneclick and confirmation via rootchecker great apps by the way great for noobs like me. My question is can I get the low down on th deodexed kc1 custom kernel and flashing to my phone also doing a nand backup on the phone. Any help would be greatly appreciated. Also have rom manager and busybox installed, however I have not flashed clockworkmod recovery as read not to do so on another post, says it wasnt suported yet. Again thanks in advance.

The kc1 is actually an update that is available through kies mini now. They are trying to get a deodexed version of the "official" update.
It fixes some bugs you may have noticed. - message failed to send, lock ups, reboots, etc...
As far as flashing goes I would start here.

golmar88 said:
The kc1 is actually an update that is available through kies mini now. They are trying to get a deodexed version of the "official" update.
It fixes some bugs you may have noticed. - message failed to send, lock ups, reboots, etc...
As far as flashing goes I would start here.
Click to expand...
Click to collapse
KC1 isn't on the update on Kies Mini. The update is KD1 which is newer and fixes the MMS and other small bugs that KC1 still had.

Checked out the link and wanted say thanks. it will be very usefull to get up to speed with this device for when the good stuff rolls out. Also one more thing reading the other post I dont think it mentioned doing nand backup. Other than that im good just wanna know ill be able fix it in case I really screw up messing around. Also awsome response time on the post and thanks again.

Beefvvl said:
KC1 isn't on the update on Kies Mini. The update is KD1 which is newer and fixes the MMS and other small bugs that KC1 still had.
Click to expand...
Click to collapse
Thanks for the info it is much appreciated

My bad, got'em mixed up.

You should go and read the CWM beta thread on the Development section. There is a CWM beta version out that lets you do a backup of the phone. However, I don't think the full restore option is working quite yet. I think the best you can do is to restore your data and cache, even though you can do a full backup. You will have to wait for the final version of CWM to come out to do the full restore from any full backups that you created.

Thanks for the heads up on that. I will be patient and wait cause im new to android and want to do it all right the first time. Hacked a couple psp's but this seems to be more risky cause for psp you just needed the right memory card and modified battery. Thanks again and I will keep my eyes open in the forums for a way to fully backup and restore.

I HAVE BEEN TRYING TO USE THE 3ERECOERY installer so i can backup restor flash zip i go aqnd it prompts me when open i down graded my root to shell root and it said could not find directed path i dont know what im doing wrong does it have to be done through odin i use winrar to extract can some ;one please give me a heads up

3e recivery installer
this stock 3e is useless please help i use short fuse and it said cant find directed path shell root not recognized any ideas i unrooted to return to stock to give it back to t mobile and it gets stuck ay waiting for device i dont know if its a bad cable or what now i cant even get it to root agin i always check the drivers box in short fuse psneuter it says drivers are fine any ideas???? STUCK AT WAITING FIR DEVICE????

Related

Captivate doesn't Work.

So I powered the phone down for class, and when I turned it back on three hours later, it hung at the boot animation, and then eventually just went to a black screen. Battery is at 100%, I had it charged that morning. Is there any way to fix my phone?
Need a little more info from you. Did you root, install any lag fixes, did you make a nandroid backup? One way that's sure to fix it is the Odin One Click Downloader listed in the development section of the Captivate forums, its always worked for me, but if you didn't have a backup it will wipe your settings and info and you'll be starting from scratch.
I was rooted, I was in the process of the 'one-step lag fix' when I realized busybox was giving me an error. It was version 1.18.1 instead of 1.17.1. So I went back to the recovery menu thing and reinstalled packages.
I have no clue what Nandroid is honestly. I'll look into Odin, but is there a Mac version?
As far as I know there isn't a Mac version of Odin yet....once you root download Rom Manager from the market place and then have it install the Clockwork Mod Recovery image, once thats done if your rom is stable use Backup current rom. I'd check if theres a wiki for Mac users, I use windows so I have no clue. I know you can download a new version of busybox installer from the market that lets you choose which version of busybox to install now. The ext2 lag fixes are pretty unstable and have caused some headaches (worked fine for me, but I still reverted back to normal). I'll post back later if I figure out a way for you to return to stock with a mac, but you might be able to just flash one of the stock roms through rom manager now after you change its name to update.zip, or flash one of the new roms that root for you (I've had pretty good luck with those so far).
Captivate doesnt work
I don't know if we have the same problem, but i got stuck on that black screen and wont boot up. I was able to recover it by doing that one click root for samsung captivate. (check it out on one of the threads) Just run the one click root/unroot it doesnt matter. Now when you're on the phone recovery screen instead of clicking "reinstall something" go to delete data, click it. as well as delete cache. then go up to do a reboot. Thats it, Worked for me hope it works for you!
p.s. Don't know if you can do it on a mac though, or you can always borrow a friends pc.
big99gt said:
As far as I know there isn't a Mac version of Odin yet....once you root download Rom Manager from the market place and then have it install the Clockwork Mod Recovery image, once thats done if your rom is stable use Backup current rom. I'd check if theres a wiki for Mac users, I use windows so I have no clue. I know you can download a new version of busybox installer from the market that lets you choose which version of busybox to install now. The ext2 lag fixes are pretty unstable and have caused some headaches (worked fine for me, but I still reverted back to normal). I'll post back later if I figure out a way for you to return to stock with a mac, but you might be able to just flash one of the stock roms through rom manager now after you change its name to update.zip, or flash one of the new roms that root for you (I've had pretty good luck with those so far).
Click to expand...
Click to collapse
My computer doesn't recognize my captivate at all, so I don't know how I can put an update.zip on the phone.
big32 said:
I don't know if we have the same problem, but i got stuck on that black screen and wont boot up. I was able to recover it by doing that one click root for samsung captivate. (check it out on one of the threads) Just run the one click root/unroot it doesnt matter. Now when you're on the phone recovery screen instead of clicking "reinstall something" go to delete data, click it. as well as delete cache. then go up to do a reboot. Thats it, Worked for me hope it works for you!
p.s. Don't know if you can do it on a mac though, or you can always borrow a friends pc.
Click to expand...
Click to collapse
I'm gonna try the delete cache/data.
You're most likely going to have to do an Odin flash.
If you are doing the ext2 fix, and busybox throws you an error, there are instructions that say run Remove to back off and fix busybox before rebooting, or this happens.
does anyone know exactly what the 'delete all user data' does?
Does it just delete downloaded apps and your contacts and music and stuff? Or will it like completely destroy my phone?
The only way to completely destroy your phone, is with physical violence, immolation, etc.
so it just goes back to a stock ROM without downloaded apps/root/whatnot?
li1on said:
so it just goes back to a stock ROM without downloaded apps/root/whatnot?
Click to expand...
Click to collapse
Odin will return the phone to an out of the box state, delete all user info will just remove you settings and personal info. I've read in other forums that you don't even need to download drivers to get your phone connected to a Mac, have you gone into settings>applications>development and enabled usb debugging? Try that and then plug your phones usb cable in. The Odin One Click Downloader thread also says you don't need drivers for Mac. I asked in the wiki thread for someone to post some info for Mac users, maybe it'll help.
EDIT: Also I know its a pain but you can get Astro File Manager from the market (free) and go into Preferences and enable browser download, then just download the update.zip on your phone and move it around and rename it with Root Explorer (a paid app but worth the money) that should let you flash roms and so on from your own phone after rooting of course.

Rom Manager

Hey huys, Im coming from the vibrant to att captivate, tmobile vibrant was very simple to flash with rom manager can I do that with the captivate as well?
The only thing rom manager is good for is making the first update.zip with cwm for flashing a rom from stock, otherwise if you are on a custom rom it really isn't needed at all as all of the roms have an extended power many to boot into cwm recovery and from there it is the exact same process...
Kool thanks it seems that this is the only way I can do it coming from stock. Because if I press all three buttoms to throw me into clock recovery when I hit reinstall packages it tells me the signature fail so im going to use rom manager hopefully I don't brick my phone wish me luck. By the way incase I brick my phone ia there a way to odin back to stock and if there is can you guide me where I can get those files
cal4877 said:
Kool thanks it seems that this is the only way I can do it coming from stock. Because if I press all three buttoms to throw me into clock recovery when I hit reinstall packages it tells me the signature fail so im going to use rom manager hopefully I don't brick my phone wish me luck. By the way incase I brick my phone ia there a way to odin back to stock and if there is can you guide me where I can get those files
Click to expand...
Click to collapse
Rom manager won't do you any good either. You need to look up 3e recovery and fix the signature problem
Sent from my HTC Vision
cal4877 said:
Kool thanks it seems that this is the only way I can do it coming from stock. Because if I press all three buttoms to throw me into clock recovery when I hit reinstall packages it tells me the signature fail so im going to use rom manager hopefully I don't brick my phone wish me luck. By the way incase I brick my phone ia there a way to odin back to stock and if there is can you guide me where I can get those files
Click to expand...
Click to collapse
Oh!! You are on stock 2.2 it won't work. Do a search for 3e recovery signing, all update.zip files have to be digitally signed to work, there is a fix where that is no longer required. Or since I'm guessing you have the update.zip already you could use odin to get back to 2.1 which had 2e recovery and not have to fix the 3e or need to root for rom manager to work either.
Edit: pirate you are a ghost slipping in invisibly while I'm replying
Is a virgin phone stock 2.2 just rooted by super one click. Where can I get the file to fix the signature
umm you could have used the search function and had it by now...
in any case its in this thread... http://forum.xda-developers.com/showthread.php?t=909213
how many times is this rom manager/3e question going to be asked TODAY? im counting 3 sofar.
i answered the other 2.
and im up to 6 this week. all new threads..
At least he's not hellbent on flashing cm7.
I haven't posted much on here but I have been reading since June/July. I had this problem but found the answer thanks to the search feature. That is why I didn't even flash a rom until a week ago. I wanted to be informed, understand how everything works, etc. Thanks to all of you devs. for your hard work!

[Q] Droid Charge Full backup?

I've had my Charge for a few weeks now. I've been silently reading the forum this whole time. I've downloaded the tools and I'm ready to kernel/root/rom it... But I like to be cautious. Everyone always says "HAVE A BACKUP YOU TARD!" but I can't seem to find any information on the topic pre-root.
So... Is there some way to backup everything on the phone prior to tinkering with it so I can put it back if something goes bad?
I did search.. Couldn't find anything for the droid. Lots of mentions of titanium. I downloaded it but it's for rooted phones as well.
No. Clockwork doesn't do a proper backup now. (And it doesn't back up the kernel anyway.)
Just changing the kernel and rooting won't alter anything that flashing the original kernel can't undo. So do that, get Titanium (I suggest the pro version, since it's the flasher's best friend), and use that to back up your user apps before you take the step of flashing a full ROM.
I'm a total newbie to this stuff, so this is something I've been wondering about as well.
s44- So changing the kernel and rooting you would say is a pretty safe venture to start with? I'm a fairly technical guy in general, but haven't ventured into the realm of phone rooting before, so I'm a little anxious about possibly bricking my phone right after I got it.
Is there something I would need to do beforehand to enable me to flash the original kernel, or is that just something you can always do after rooting? Thanks for any info.
We have odin. Thanks to odin we can always flash back to stock rom. If you look at the development forum you will find the stock package that no matter what you do you can always go back. Just dont mess with the radio or the pit file. Always us pda in odin unless you are flashing a new radio and you are instricted todo so. For user apps and data you can use titanium backup
Sent from my SCH-I510 using XDA Premium App
Excellent, thanks. I assume you're referring to the stock ROM at this link? http://forum.xda-developers.com/showthread.php?t=1085190
What exactly does flashing a new radio do? I'm not really familiar with the terminology
ColonelSeitan said:
Excellent, thanks. I assume you're referring to the stock ROM at this link? http://forum.xda-developers.com/showthread.php?t=1085190
What exactly does flashing a new radio do? I'm not really familiar with the terminology
Click to expand...
Click to collapse
Flashing a new radio means replacing the current modem/voice radio's software with a new/different one. There's currently no flashable radio softwares that I know of for the Charge. There are two radio softwares for the phone, though: the original version shipped with the phone, and the new one that started rolling out last week with the EE4 OTA update. That update is a patch to the old radio software (a patch is a method that changes only portion of the current software rather than overwriting the whole thing).
Hope that helps you understand a bit better.
Can't back up my phone.
I'm sorry if someone already posted this. I've been hours at it re installing ROMs. I have GummyCharged 2.0. I've tried doing a nandroid back up for the past couple of days. I've tried Rom Manager to back it up many different times and every time it shows that open box for a few seconds then it's just the android with a triangle /!\. I've tried backing up while on Recovery but at the end it can't find my SD-ext and doesnt back up. I can't find anything online relating to it. I'm gonna reinstall the stock and root it. I'll back up every time I change my phone and see when exactly it starts to fail. I'm still a noob at this.
BlackMagicNights said:
I'm sorry if someone already posted this. I've been hours at it re installing ROMs. I have GummyCharged 2.0. I've tried doing a nandroid back up for the past couple of days. I've tried Rom Manager to back it up many different times and every time it shows that open box for a few seconds then it's just the android with a triangle /!\. I've tried backing up while on Recovery but at the end it can't find my SD-ext and doesnt back up. I can't find anything online relating to it. I'm gonna reinstall the stock and root it. I'll back up every time I change my phone and see when exactly it starts to fail. I'm still a noob at this.
Click to expand...
Click to collapse
first of all don't use Rom Manager for anything on the Charge as it doesn't work right... second of all nandroid backups can be made on Gummy 2.0, you would need the most up to date CWM from Imnuts thread here: http://forum.xda-developers.com/showthread.php?t=1112804, it should be orange and version 4.0.1.4
BlackMagicNights said:
I'm sorry if someone already posted this. I've been hours at it re installing ROMs. I have GummyCharged 2.0. I've tried doing a nandroid back up for the past couple of days. I've tried Rom Manager to back it up many different times and every time it shows that open box for a few seconds then it's just the android with a triangle /!\. I've tried backing up while on Recovery but at the end it can't find my SD-ext and doesnt back up. I can't find anything online relating to it. I'm gonna reinstall the stock and root it. I'll back up every time I change my phone and see when exactly it starts to fail. I'm still a noob at this.
Click to expand...
Click to collapse
Rom Manager and the Charge do NOT work.
Make sure you're using the latest Recovery as that's the only one that's able to backup/restore and even then there's known to be issues.
Just gonna latch on here since this is a pretty recent last post...
I have recovery 4.0.0.8 and am trying to go to gummycharge GBE 2.0RC1.5, do I need to update my recovery first? I'm assuming I do to backup, but just wanted to confirm. And on the subject of updating recovery, I use ODIN just like I did for Gummy (except following what it says on that link, no auto reboot)?
Thanks, I've done enough rooting in the past, but not too familiar with CWM updating and ODIN.
JLCollier2005 said:
Just gonna latch on here since this is a pretty recent last post...
I have recovery 4.0.0.8 and am trying to go to gummycharge GBE 2.0RC1.5, do I need to update my recovery first? I'm assuming I do to backup, but just wanted to confirm. And on the subject of updating recovery, I use ODIN just like I did for Gummy (except following what it says on that link, no auto reboot)?
Thanks, I've done enough rooting in the past, but not too familiar with CWM updating and ODIN.
Click to expand...
Click to collapse
if you're trying to do a CWM backup first then yes you would need to update CWM to the latest 8/17 build which you can odin separately... odining or flashing the new Gummy rom should update your kernel and thus update CWM
What is the latest cwm for droid charge. I had 5.0 on tunderbolt now only have 3.0 on Charge.
mickrg123 said:
What is the latest cwm for droid charge. I had 5.0 on tunderbolt now only have 3.0 on Charge.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1112804
v4.0.1.4...backup no workee...MD5 mismatch!
When attempting to run a backup via CWM v4.0.1.4 I get MD5 mismatch! Yes...Im on the ROM that I'm attempting to backup. Any help would be kick [email protected]#...
Here's my 5 cents for what it's worth.
I only backup what I really need, rather than a full backup - that way I know I keep the DATA, not the old apps, outdated cache and setting etc.
To do this I use:
SMS Backup+ : Backs up SMS, Call Log
Evernote : I keep notes, screenshots, voice memos etc in sync using evernote. This of course only works if you like evernote
Eye-Fi : I move all my pictures of the phone using Eye-Fi. This cost of course, sorry, but it works (Plus you get a cool SD card for your digital camera). Other options exists, I hear a lot of good stuff about SugarSync.
Market and Amazon : All you apps are already backed up on Google Android Market or Amazon (dep. on where you bought/downloaded them from). Some people wants everything re-installed from the get go. I prefer re-install when I need it, I'm always near 4G so it literally takes seconds.
This has been working so well that I now don't think twice before factory resetting or upgrading firmware. I just do it.
Hope that helped...

[Q] Samsung Galaxy S 4G Gingerbread 2.3.6 Update and Root

Samsung Galaxy S 4G Gingerbread 2.3.6 Update and Root
So i found this over at http://thepiratebay.org/torrent/6794946
if anyone has tried this let me know what happens and what you think. I bought this phone used a few weeks ago. I had no idea about rooting and unlocking and roms, I basically learned everyrthing thru research here....so naturally im a tad skeptical of things outside of this forum....silly
Ive rooted and unloked my phone. ive flashed several roms. right now i have the octane v2.3.5...smooth resposive fast
Not sure it's much if any different from what you can get out of the forums here. I'm running rooted 2.3.6.
I'm a 'better to be safe than sorry' type. Looks like that links makes a coupke of references back to here, anyway.
Sent from my SGH-T959V using XDA App
Don't use anything that isn't on this forum or in RootzWiki. You'll just get flamed for hard bricking by using something from another site.
Rooting and deleting bloat
I got this T959V last week and knew there had to be development on it. I got a Pandigital novel last christmas and learned some good lessons about android over at slatredroid. I was happy to find so much good work here and jumped right into flashing after slogging through this swamp (that's a compliment!) of info and choices. My phone arrived with Froyo 2.2.1 and stock T959VUVKD1. After getting my mind wrapped around the possibility of bricking the thing (which, thanks to the nature of the device and/or the excellent developers here, seems less likely than with the Pandigital) I used Odin to flash right to FW2.3.5, then tonight to FW2.3.6, T959VUVKJ5, kernel 2.6.35.7-T959VUVKF1-CL270364
I have not removed my sdcard (unlike w/pandigital flashing) or sim card on either of the three stops in my upgrading. HOWEVER, when I followed dsexton702's guide to rooting I did have to remove my battery - the red blowfish after loading his first rooting tarball nearly had me dropping a load in my pants. Couldn't power down with the button, so I pulled the battery and hoped. Put the battery back in, powered on and it booted. I thought factory reset, then reflashing 2.3.6 and forgetting about rooting. But I do want to remove some of the bloat from the device, so I just used odin to upload the second rooting tar and prayed! It worked! Thank you, dsxton702!
At least it seems to have worked. When I open titanium it now recognizes the device as rooted. I am using the freebie, which may be my real problem. But, anyway, here's where I am. When I try to delete preinstalled software like slacke by doing FORCE REMOVE APP in titanium I get this result:
finding update package
unknown volume for path [SYSTEM:/app/slackerradio.apk]
Can't mount SYSTEM:/app/slackerradio.apk
Installation aborted
Given these choices, I tried #4 first, then #1:
reboot system
apply update from sdcard
wipe data/factory reset
wipe cache partition
The app remains. I know I have to buy the app to freeze other apps; the error message tells me so. But to delete, is my problem that I am using the titanium freebie, or am I doing something wrong with the freebie?
So has anyone tried it? I just want to make sure someone has confirmation before I try this one.
neon_skunk said:
So has anyone tried it? I just want to make sure someone has confirmation before I try this one.
Click to expand...
Click to collapse
Neon - Use the GB Ext4 Starter Pack - It works.
Or use The KJ6 Heimdall One-Click Collection - It works.
Or use ROM-ODIN-2.3.6-Gingerbread Offical - It works.
If there were torrents for downloads things would be much easier:laugh:
Help me with Valhalla Custom ROM flashing
Hello. I just thought this forum to be the appropriate one for posting my issue. I have SGS4G. Using XDA forums help I have been able to upgrade from 2.3.3 to 2.3.6. lumin30's "[GUIDES] Fresh out of box Galaxy S 4G | Heimdall One-Click For Dummies" I have flashed my Kernel and installed CWM. Thanks a lot lumin30 for your guide. It really helped a noob like me.
However I am facing below problems
1. From the same link http://forum.xda-developers.com/showthread.php?t=1470716 I chose Valhalla Black FB edition. And when i choose "vb-fb-build-4.zip" download link it downloads very slowly and evenif the total file size initially shows as 143MB, however only 20-40MB files are getting downloaded. I have tried several times. Same issue..not sure why. Anyone has any link from where I can get the latest Valhalla Black FB edition?
2. When I tried to take the Valhalla Black FB Edition from "https://github.com/teamacid/valhalla-black (Valhalla Black FB Edition on GitHub) and downloaded it it was around 141MB. The name was "teamacid-valhalla-black-build3-4-ge768021.zip". not sure if this is the FB version or not. Anyway when I try flashing this ROM I am getting "update opening and installation aborted" on top it says "choose the update file from sdcard" or any other location kind of information..
Could anyone help me with these questions. It will really be a great help as I need to flash the ROM. Do I also need to install some more files along with the ROM?
Please help!!
tomzzy said:
Hello. I just thought this forum to be the appropriate one for posting my issue. I have SGS4G. Using XDA forums help I have been able to upgrade from 2.3.3 to 2.3.6. lumin30's "[GUIDES] Fresh out of box Galaxy S 4G | Heimdall One-Click For Dummies" I have flashed my Kernel and installed CWM. Thanks a lot lumin30 for your guide. It really helped a noob like me.
However I am facing below problems
1. From the same link http://forum.xda-developers.com/showthread.php?t=1470716 I chose Valhalla Black FB edition. And when i choose "vb-fb-build-4.zip" download link it downloads very slowly and evenif the total file size initially shows as 143MB, however only 20-40MB files are getting downloaded. I have tried several times. Same issue..not sure why. Anyone has any link from where I can get the latest Valhalla Black FB edition?
2. When I tried to take the Valhalla Black FB Edition from "https://github.com/teamacid/valhalla-black (Valhalla Black FB Edition on GitHub) and downloaded it it was around 141MB. The name was "teamacid-valhalla-black-build3-4-ge768021.zip". not sure if this is the FB version or not. Anyway when I try flashing this ROM I am getting "update opening and installation aborted" on top it says "choose the update file from sdcard" or any other location kind of information..
Could anyone help me with these questions. It will really be a great help as I need to flash the ROM. Do I also need to install some more files along with the ROM?
Click to expand...
Click to collapse
Is there anyone who can help me? I have checked all the forum's and tried all possible options..I am still getting on CWM5
Opening package
Installing package
Installation Aborted.
No other message.
I am on Valhalla Final and trying to flash Valhalla Black FB edition
Please someone help me!!
tomzzy said:
Is there anyone who can help me? I have checked all the forum's and tried all possible options..I am still getting on CWM5
Opening package
Installing package
Installation Aborted.
No other message.
I am on Valhalla Final and trying to flash Valhalla Black FB edition
Please someone help me!!
Click to expand...
Click to collapse
Check rom md5 you might have a bad download
And.try the download link.provided on rom thread OP that's it.
----------------------------------------------
If helped don't be afraid to hit the thanks button it doesn't bite lol
Are you choosing update from zip or install from zip? I haven't looked at cwm in awhile so not exactly sure what it says
Sent from my SGH-T959V using xda premium

[Q] big problem with sidekick

bought sidekick sght839 from friend and it worked fine b4 doing reset. now, when it starts, the tutorial comes up on home screen and can`t press arrow to proceed to next page. firmware 2.2.1-kernal 2.6.32.9-build froyo uvkj2. the wireless works and connects to internet fine. can`t use phone as 456 keys dont work and worked b4. can change settings OK. have rooted it. still doesnt want to work as b4. am new here so if someone could let me know if they have any ideas, I would appreciate it. am also new to android phones. I cant find heimdall file to download. Know how to set phone to download and use Odin but cant find proper files online.
Use the search bar on XDA to search for the kj2 stock Odin files, follow the directions given closely, download them, make sure you have the correct drivers so that Odin recognizes your phone, then boot into download mode using the method found in the forums, just do a quick search for download mode. You should have everything operational after download from Odin is finished, hope this helps
Sent from my SGH-T839 using XDA App
trouble installing odin
I have tried numerous times to install Odin but all I get is unregistered device...that is as far as it goes. Dont know how to get around that. 456 keys also work then dont work otherwise the phone works fine as far as internet and making calls goes. Crazy device!
Try this:
http://forum.xda-developers.com/showthread.php?t=1350060&highlight=heimdall
I soft-bricked my phone and this was the only method that worked.
if you havent reflashed your firmware yet, i have a suggestion. install clockworkmod recovery. there is a thread in the sk4g development section of this website. the title is something like cwm for the sk4g. enjoy! so look for that and follow the instructions in the first post of that thread. make sure you grab the update.zip file from that thread and do not flash cwm through rom manager. trust me on this. after you have followed the instructions in that thread, boot into cwm (boot into stock recovery and select reinstall packages. you should then boot into cwm recovery), select advanced, and then select fix permissions. when it finishes, it will say done. reboot your device and see if any of the problems have been fixed. i did this and it stopped my phone from randomly rebooting every 15 to 30 minutes. it might fix the problems on your device. if not, i would move to the next step, reflashing the firmware. flash the kj2 build and then learn how to remove bloatware. kj2 is less buggy to start with. still buggy, but less buggy than KD1, KG2, or the other version (KI2?). if you reflash firmware, you will need to re-root in order to remove bloatware. removing bloatware is key for optimal performance with the stock firmware. you can also flash a custom rom if you wish. most of the custom roms on this site have minimal bloatware, so if you wish to go that route, bloatware shouldnt be much of an issue. i personally am on the stock firmware and dont suggest flashing roms for someone so new to android. but if you feel confident enough, thats your decision. i also suggest booting into cwm and running fix permissions after removing bloatware. i theorize that removing system apps causes permissions errors similar to registry errors in windows.
some success with sk4g
don`t know how or why but I got frustrated with the phone and threw it in the trash on top of coffee grounds...changed my mind and pulled it out and cleaned it and charged it and...voila...it worked. banged it against the sink a couple times. weird! so, now I am trying to install custom rom and keep running into everification error when I try to flash. 456 buttons still dont work and cant take a video with it but it will probably work better if I can find a work-around for these errors I get. I am on a mission now and I cant give up. Hope someone can help me. I think there may be hope for this thing. Thanks for whatever help I can get.
i told you, install clockworkmod and fix permissions. it will probably fix the problems you are having. if you choose not to listen, thats. your choice. but my advice will probably help you without having to through the pain in the rear of reflashing the firmware. reflashing the firmware itself isnt really that difficult, but once you do it, your back to square one with your device. starting from scratch is the frustrating part. i bricked my phone and had to reflash, and it took me a couple weeks to get the phone where i needed it again. im staying on the stock firmware for this reason.
how does one fix permissions
OK OK dont yell. How do I fix permissions? Newbie on board here so I need a little more help than the rest. I dont necessarily want to do the rom thing myself. Thanks.
copy and paste this into your browser: forum.xda-developers.com/showthread.php?t=1124453 and follow the instructions in the first post. after you have followed those instructions, boot into recovery mode. the stock recovery will apear. scroll down and select reinstall packages. the clockworkmod recovery should boot up. the text in the screen will be orange. scroll down and select advanced. scroll down again and select fix permissions. when it finishes, it will say done. reboot your device and see if you have any of the issues you were having. i am not guaranteeing this will fix the issues, but i think it might. if it doesnt, my next suggestion will be reflashing the stock firmware. but try this and post back when finished and let me know if it works.
sk4g problem
didnt work. did exactly what you said and no go. any other suggestions. it works so well for some things like wifi and calling except 456 buttons on and off. it is funky indeed. thanks for the help also, cant take video or manage photo or use front camera as the left side button to choose options doesnt work either. seems like something is up with the rom. cant install anything from samsung or tmobile as it is an unregistered phone.
were you able to boot into clockworkmod recovery?
boot up
yes I did.
then you need to reflash your firmware. you need odin, you need the samsung vibrant drivers, and you need the firmware files. do a search on odin in the dev thread for this device and you should be able to find everything you need, including instructions.
Have tried that too
have the drivers, have odin and have tried that too. that didnt work as the phone is unregistered and not recognized. it is used and I cant register it.
on your phone, go to settings>about phone and scroll down to where it says baseband version. the last 3 characters under that will say either kd1, kg2, or kj2. if its not kj2, then i have a suggestion for you. but post back and lmk.
phone setting
it is kj2. now what? this is all confusing as it has been updated I believe by previous owner. thanks for your time. i am going to try the odin method again. i first did it on a 64bit puter with windows 7 so i can try it on my 32bit machine. have read that sometimes odin doesnt work well on 64bit. am willing to try anything. will let you know. thanks again. cant get the stock rom download anywhere. will just try flashing custom rom.
you cant odin a custom rom unless the dev makes an odin file, which they usually dont. you have to flash through clockworkmod. you can head over to the dev section and pick from many roms that are listed. follow the developers instructions for flashing very carefully or you will brick your device.
Thanks for advice.
I know I can`t odin a custom rom. I can`t seem to odin anything on this machine. I have cwm and have tried using it to flash a rom but I keep getting everification and such error msgs. Gonna let it sit for awhile and think about this. I have the update.zip file on sdcard but can`t seem to get that to install no matter what I do. Very puzzling deal. Thanks anyway for your help.
do you have android sdk installed on your computer? google it and install it, then try odin again.
got sdk
sdk installed and will try odin again...seems a little more complicated than the last time I tried...will google a bit more on this. Thanks.

Categories

Resources