Database Info

[Q] Tablet not booting (with log and video)

Hello,
My ZT-282 Tablet is having some troubles booting. It started when trying to flash the latest rom (0327). The installation went fine in the sense there were not error messages during the installation.
Here is a video of the upgrade and the problem that follows:
http://dl.dropbox.com/u/165691/video-2012-04-08-19-13-46.mp4
As you can see it first shows a logo, flashes for a second then shows the logo a second time. After that it freezes. I have left it alone in this state for an hour, but nothing happens.
Here is a log that I got via adb from the tablet. Does it give any clues?
Code:
--------- beginning of /dev/log/main
I/DEBUG ( 79): debuggerd: Feb 9 2012 19:41:11
D/Memsicd ( 91): search aac sensor: MXC622X
D/Memsicd ( 91): aac sensor MXC622X[0] communicate success
I//system/bin/set_display_mode.sh( 73): 1024,1200
D/sslib ( 91): sslib: ss_config file read succeed
D/sslib ( 91): sslib: entering ss_load_module_raw
D/sslib ( 91): Loading module /system/lib/sslib/inputraw_ss.so
I/logwrapper( 73): /system/bin/set_display_mode.sh terminated by exit(0)
D/sslib ( 91): mod_init of input raw
--------- beginning of /dev/log/system
I/Vold ( 75): Vold 2.1 (the revenge) firing up
I/Netd ( 101): Netd 1.0 starting
D/Vold ( 75): Volume sdcard state changing -1 (Initializing) -> 0 (No-Media)
D/Vold ( 75): Volume flash state changing -1 (Initializing) -> 0 (No-Media)
E/Netd ( 101): Unable to create netlink socket: Protocol not supported
E/Netd ( 101): Unable to open quota2 logging socket
D/Vold ( 75): Volume flash state changing 0 (No-Media) -> 2 (Pending)
E/NetlinkEvent( 75): NetlinkEvent::FindParam(): Parameter 'NPARTS' not found
D/Vold ( 75): Volume flash state changing 2 (Pending) -> 1 (Idle-Unmounted)
D/Vold ( 75): Volume flash state changing 1 (Idle-Unmounted) -> 2 (Pending)
E/NetlinkEvent( 75): NetlinkEvent::FindParam(): Parameter 'NPARTS' not found
D/Vold ( 75): Volume flash state changing 2 (Pending) -> 1 (Idle-Unmounted)
I/Netd ( 135): Netd 1.0 starting
E/Netd ( 135): Unable to create netlink socket: Protocol not supported
E/Netd ( 135): Unable to open quota2 logging socket
I/Netd ( 163): Netd 1.0 starting
E/Netd ( 163): Unable to create netlink socket: Protocol not supported
E/Netd ( 163): Unable to open quota2 logging socket
I/Netd ( 191): Netd 1.0 starting
E/Netd ( 191): Unable to create netlink socket: Protocol not supported
E/Netd ( 191): Unable to open quota2 logging socket
I/Netd ( 219): Netd 1.0 starting
E/Netd ( 219): Unable to create netlink socket: Protocol not supported
E/Netd ( 219): Unable to open quota2 logging socket
The messages about not being able to create a netlink socket goes on forever after this.

I'm having the same issue, did you know how to solve it yet?

[Q] Do I need these files for my port?

I am porting cm7 to my Samsung Conquer 4g. This is taken from the updater-script
Code:
ui_print("Checking state of BML/MTD...");
package_extract_file("modem.bin", "/tmp/modem.bin");
set_perm(0, 0, 0777, "/tmp/modem.bin");
package_extract_file("updater.sh", "/tmp/updater.sh");
set_perm(0, 0, 0777, "/tmp/updater.sh");
package_extract_file("make_ext4fs", "/tmp/make_ext4fs");
set_perm(0, 0, 0777, "/tmp/make_ext4fs");
package_extract_file("busybox", "/tmp/busybox");
set_perm(0, 0, 0777, "/tmp/busybox");
package_extract_file("flash_image", "/tmp/flash_image");
set_perm(0, 0, 0777, "/tmp/flash_image");
package_extract_file("erase_image", "/tmp/erase_image");
set_perm(0, 0, 0777, "/tmp/erase_image");
package_extract_file("bml_over_mtd", "/tmp/bml_over_mtd");
set_perm(0, 0, 0777, "/tmp/bml_over_mtd");
package_extract_file("bml_over_mtd.sh", "/tmp/bml_over_mtd.sh");
set_perm(0, 0, 0777, "/tmp/bml_over_mtd.sh");
Do I need these files? Also when I removed them and tried to boot it got stuck on the bootsplash. Here's my logcat.
Code:
--------- beginning of /dev/log/main
I/DEBUG ( 109): debuggerd: Mar 17 2012 16:39:00
E/macloader( 107): wifi.mac_addr: .mac.info already exist!
--------- beginning of /dev/log/system
I/Vold ( 106): Vold 2.1.1 (the revenge) firing up
I/Vold ( 106): Volume::setState -> Volume sdcard1 /mnt/sdcard state changed from -1 (Initializing) to 0 (No-Media)
I/Vold ( 106): NetlinkHandler::onEvent ->[block] from uevent
I/Vold ( 106): NetlinkHandler::onEvent ->[block] from uevent
I/Vold ( 106): NetlinkHandler::onEvent ->[block] from uevent
I/Vold ( 106): NetlinkHandler::onEvent ->[block] from uevent
I/Vold ( 106): NetlinkHandler::onEvent ->[block] from uevent
I/Vold ( 106): NetlinkHandler::onEvent ->[block] from uevent
I/Vold ( 106): NetlinkHandler::onEvent ->[block] from uevent
I/Vold ( 106): NetlinkHandler::onEvent ->[block] from uevent
I/Vold ( 106): NetlinkHandler::onEvent ->[block] from uevent
I/Vold ( 106): NetlinkHandler::onEvent ->[block] from uevent
I/Vold ( 106): NetlinkHandler::onEvent ->[block] from uevent
I/Vold ( 106): NetlinkHandler::onEvent ->[block] from uevent
I/Vold ( 106): NetlinkHandler::onEvent ->[block] from uevent
I/Vold ( 106): NetlinkHandler::onEvent ->[block] from uevent
I/Vold ( 106): NetlinkHandler::onEvent ->[block] from uevent
I/Vold ( 106): NetlinkHandler::onEvent ->[block] from uevent
I/Vold ( 106): NetlinkHandler::onEvent ->[block] from uevent
I/Vold ( 106): NetlinkHandler::onEvent ->[block] from uevent
I/Vold ( 106): NetlinkHandler::onEvent ->[block] from uevent
I/Vold ( 106): NetlinkHandler::onEvent ->[block] from uevent
I/Vold ( 106): NetlinkHandler::onEvent ->[block] from uevent
I/Vold ( 106): NetlinkHandler::onEvent ->[block] from uevent
I/Vold ( 106): NetlinkHandler::onEvent ->[block] from uevent
I/Vold ( 106): NetlinkHandler::onEvent ->[block] from uevent
I/Vold ( 106): NetlinkHandler::onEvent ->[block] from uevent
I/Vold ( 106): NetlinkHandler::onEvent ->[block] from uevent
I/Vold ( 106): NetlinkHandler::onEvent ->[block] from uevent
I/Vold ( 106): NetlinkHandler::onEvent ->[block] from uevent
I/Vold ( 106): NetlinkHandler::onEvent ->[block] from uevent
I/Vold ( 106): NetlinkHandler::onEvent ->[block] from uevent
D/DirectVolume( 106): DirectVolume::handleBlockEvent-> ::NlActionAdd:: major 179,minor 0 (disk)
D/DirectVolume( 106): DirectVolume::handleDiskAdded -> mDiskMajor 179, mDiskMinor 0, NPARTS:1
I/Vold ( 106): Volume::setState -> Volume sdcard1 /mnt/sdcard state changed from 0 (No-Media) to 2 (Pending)
I/Vold ( 106): NetlinkHandler::onEvent ->[block] from uevent
D/DirectVolume( 106): DirectVolume::handleBlockEvent-> ::NlActionAdd:: major 179,minor 1 (partition)
D/DirectVolume( 106): DirectVolume::handlePartitionAdded -> major 179, minor 1, PARTN 1
I/Vold ( 106): Volume::setState -> Volume sdcard1 /mnt/sdcard state changed from 2 (Pending) to 1 (Idle-Unmounted)
I/Vold ( 106): NetlinkHandler::onEvent ->[switch] from uevent
D/Vold ( 106): VolumeManager::handleSwitchEvent -> Changed USB status SWITCH_NAME(usb_mass_storage),SWITCH_STATE(online)
W/Vold ( 106): Ignoring unknown switch 'usb_mass_storage'
I/Vold ( 106): NetlinkHandler::onEvent ->[switch] from uevent
D/Vold ( 106): VolumeManager::handleSwitchEvent -> Changed USB status SWITCH_NAME(MSM72K_UDC),SWITCH_STATE(offline)
W/Vold ( 106): Ignoring unknown switch 'MSM72K_UDC'
I/Vold ( 106): NetlinkHandler::onEvent ->[switch] from uevent
D/Vold ( 106): VolumeManager::handleSwitchEvent -> Changed USB status SWITCH_NAME(MSM72K_UDC),SWITCH_STATE(online)
W/Vold ( 106): Ignoring unknown switch 'MSM72K_UDC'
I/Vold ( 106): NetlinkHandler::onEvent ->[switch] from uevent
D/Vold ( 106): VolumeManager::handleSwitchEvent -> Changed USB status SWITCH_NAME(usb_configuration),SWITCH_STATE(1)
W/Vold ( 106): Ignoring unknown switch 'usb_configuration'
I/Vold ( 106): NetlinkHandler::onEvent ->[switch] from uevent
D/Vold ( 106): VolumeManager::handleSwitchEvent -> Changed USB status SWITCH_NAME(MSM72K_UDC),SWITCH_STATE(offline)
W/Vold ( 106): Ignoring unknown switch 'MSM72K_UDC'
I/Vold ( 106): NetlinkHandler::onEvent ->[switch] from uevent
D/Vold ( 106): VolumeManager::handleSwitchEvent -> Changed USB status SWITCH_NAME(usb_connected),SWITCH_STATE(0)
D/Vold ( 106): USB disconnected
I/Vold ( 106): NetlinkHandler::onEvent ->[switch] from uevent
D/Vold ( 106): VolumeManager::handleSwitchEvent -> Changed USB status SWITCH_NAME(usb_configuration),SWITCH_STATE(0)
W/Vold ( 106): Ignoring unknown switch 'usb_configuration'
I/Vold ( 106): NetlinkHandler::onEvent ->[switch] from uevent
D/Vold ( 106): VolumeManager::handleSwitchEvent -> Changed USB status SWITCH_NAME(usb_mass_storage),SWITCH_STATE(offline)
W/Vold ( 106): Ignoring unknown switch 'usb_mass_storage'
I/Vold ( 106): NetlinkHandler::onEvent ->[switch] from uevent
D/Vold ( 106): VolumeManager::handleSwitchEvent -> Changed USB status SWITCH_NAME(usb_connected),SWITCH_STATE(1)
D/Vold ( 106): USB connected
D/Vold ( 106): Share method ums now available
I/Vold ( 106): NetlinkHandler::onEvent ->[switch] from uevent
D/Vold ( 106): VolumeManager::handleSwitchEvent -> Changed USB status SWITCH_NAME(usb_mass_storage),SWITCH_STATE(online)
W/Vold ( 106): Ignoring unknown switch 'usb_mass_storage'
I/Vold ( 106): NetlinkHandler::onEvent ->[switch] from uevent
D/Vold ( 106): VolumeManager::handleSwitchEvent -> Changed USB status SWITCH_NAME(MSM72K_UDC),SWITCH_STATE(online)
W/Vold ( 106): Ignoring unknown switch 'MSM72K_UDC'
I/Vold ( 106): NetlinkHandler::onEvent ->[switch] from uevent
D/Vold ( 106): VolumeManager::handleSwitchEvent -> Changed USB status SWITCH_NAME(usb_configuration),SWITCH_STATE(1)
W/Vold ( 106): Ignoring unknown switch 'usb_configuration'
Can you please tell me what I need to fix? Thanks!

[APP/MOD]Google Wallet 2.0 GT-i9500/05[NEW]

​NOTE: i will not take any credits for the content and works(because its not my work). I will not take any liability to any Damages to your phone. try at your own risks!
Hi, friends i have updated this thread, because of the latest Google Wallet 2.0 is more easier and friendlier than before.
I wondering whether our Galaxy S4 supports the awesome Google Wallet and i found the working methods to enable
it in our S4 international (tested with my GT-i9500 should works with i9505 also)
The installation process is very hassle free no more build.prop editing.
Requirements:
-Xposed Framework
-any ROM & variant
1.Download the 2 APK from the attachment and install the new wallet first.
Note: Remove your previous Wallet app.
2.install the Xposed module & activate it!
NOTE: if you have Nottach Xposed just tick the Google Wallet Hack under the application,no need to install the individual module.
3.REBOOT!
ENJOY! the NEW Google Wallet experience
NOTE: turn on NFC for its following features.
Some Screenshots from my Device:
Attached below
THANKS! FOR TRY IT.

Does this mean I can use the phone to pay for stuff in the UK where we can't normally get Wallet?

thecremeegg said:
Does this mean I can use the phone to pay for stuff in the UK where we can't normally get Wallet?
Click to expand...
Click to collapse
No this is a mod to get google wallet to work on a i9505, this will not allow you to use google wallet in the UK, as currently you will need to have an account with an american address and credit card.
Currently in the uk there is no retailer that accepts google wallet as payment.
Optimal
However If anyone has found a UK retailer that accept android google wallet I would be very much interested to here, As i certainly want to use it.
Optimal

OptimalKiller said:
No this is a mod to get google wallet to work on a i9505, this will not allow you to use google wallet in the UK, as currently you will need to have an account with an american address and credit card.
Currently in the uk there is no retailer that accepts google wallet as payment.
Optimal
However If anyone has found a UK retailer that accept android google wallet I would be very much interested to here, As i certainly want to use it.
Optimal
Click to expand...
Click to collapse
Are you sure? I remember seeing people on the S3 forum who managed to use their Google wallet in the UK in Greggs n McDonald's and they even showed the receipts. I don't think the shops contact less technology machines need to be any different to those that accept Visa contact less debit cards like I use quite often.
Sent from my GT-I9505 using xda premium

djwilliams100 said:
Are you sure? I remember seeing people on the S3 forum who managed to use their Google wallet in the UK in Greggs n McDonald's and they even showed the receipts. I don't think the shops contact less technology machines need to be any different to those that accept Visa contact less debit cards like I use quite often.
Sent from my GT-I9505 using xda premium
Click to expand...
Click to collapse
I'm not 100% sure, but now you mention it, might try McDonalds with Google Wallet. but if I also remember there is another issue for uk users, that you needed to have an american address as well as a USA credit card for this to fully work in the uk!
Please correct me if I am wrong.
Also just pulled of a list of uk contactless payment shops if anyone is intrested.
Code:
Aldi
AMT Coffee
Banardos
Boots
Caffe Nero
Chop'd
Coffee Republic
Co-op Pharmacy
Costa Coffee
Costcutter
Cruush
David Lloyd
Eat
Gourmet Burger Kitchen
Greggs
Ikea
J D Weatherspoon
Little Chef
M6 Toll
Marks and Spencer
McDonalds
Nandos
National Trust
Paul's Bakers
Paypoint
Post Office
Pret
Spar
Stagecoach
Starbucks
Subway
Superdrug
TfL
Timpsons
Waitrose
Wasabi
West Cornwall Pasty
WH Smith
Wilkinsons
Optimal

OptimalKiller said:
I'm not 100% sure, but now you mention it, might try McDonalds with Google Wallet. but if I also remember there is another issue for uk users, that you needed to have an american address as well as a USA credit card for this to fully work in the uk!
Please correct me if I am wrong.
Also just pulled of a list of uk contactless payment shops if anyone is intrested.
Code:
Aldi
AMT Coffee
Banardos
Boots
Caffe Nero
Chop'd
Coffee Republic
Co-op Pharmacy
Costa Coffee
Costcutter
Cruush
David Lloyd
Eat
Gourmet Burger Kitchen
Greggs
Ikea
J D Weatherspoon
Little Chef
M6 Toll
Marks and Spencer
McDonalds
Nandos
National Trust
Paul's Bakers
Paypoint
Post Office
Pret
Spar
Stagecoach
Starbucks
Subway
Superdrug
TfL
Timpsons
Waitrose
Wasabi
West Cornwall Pasty
WH Smith
Wilkinsons
Optimal
Click to expand...
Click to collapse
your right doesn't work with international payment so cannot be used outside of the us got that error message when i tried at mac ds before. it just declined in subway.

By golly, it worked great. Just tested it at McDonald's today and worked like a gem on my stock i-9505. Thanks for the work!
For those doing it, you really do need to wait like 45 minutes.

lovell88 said:
By golly, it worked great. Just tested it at McDonald's today and worked like a gem on my stock i-9505. Thanks for the work!
For those doing it, you really do need to wait like 45 minutes.
Click to expand...
Click to collapse
Great! Enjoy,

LATER EDIT:
I have fixed the bootloop problem, installing the latest XposedFramework, 2.1.4
For me it seems to have blocked at the boot screen...
This is the logcat:
Code:
D/Xposed ( 214): Starting Xposed binary version 32, compiled for SDK 17
D/Xposed ( 214): Phone: Galaxy Nexus (samsung), Android version 4.2.2 (SDK 17)
D/Xposed ( 214): ROM: JDQ39.I9505XXUBMF8
I/Xposed ( 214): -----------------
I/Xposed ( 214): Found new Xposed jar version, activating it
I/Xposed ( 214): Added Xposed (/data/xposed/XposedBridge.jar) to CLASSPATH.
D/AndroidRuntime( 214):
D/AndroidRuntime( 214): >>>>>> AndroidRuntime START de.robv.android.xposed.XposedBridge <<<<<<
D/AndroidRuntime( 214): CheckJNI is OFF
D/AndroidRuntime( 214): setted country_code = Germany
D/AndroidRuntime( 214): setted countryiso_code = DE
D/AndroidRuntime( 214): setted sales_code = DBT
D/AndroidRuntime( 214): readGMSProperty: start
D/AndroidRuntime( 214): readGMSProperty: end
D/AndroidRuntime( 214): addProductProperty: start
D/qdoverlay( 213): initoverlay:: opening the device:: /dev/graphics/fb0
D/qdoverlay( 213): initoverlay:: opening the device:: /dev/graphics/fb1
D/qdoverlay( 213): ndx=6 num=5 z_order=-1
D/qdoverlay( 213): initoverlay:: opening the device:: /dev/graphics/fb2
I/Encryption( 187): Vold 2.1 (the revenge) firing up
E/Encryption( 187): created DirEncryptionManager
D/Diag_Lib( 202): StartMulticlient:
D/Diag_Lib( 202): StartMulticlient() START
D/Diag_Lib( 202): StartMulticlient() fd=16 END
D/Diag_Lib( 202): [TID] MulticlientLoop(531)
D/Diag_Lib( 202): MulticlientLoop start...
D/Diag_Lib( 202): set_multiclient_max_fd:
D/Diag_Lib( 202): set_multiclient_max_fd: maxfd=16
D/Diag_Lib( 202): set_multiclient_fd_set:
D/Vold ( 187): Volume sdcard state changing -1 (Initializing) -> 0 (No-Media)
D/Encryption( 187): enable android secure container 'sdcard'
D/Vold ( 187): Volume sda state changing -1 (Initializing) -> 0 (No-Media)
D/Vold ( 187): Volume sdb state changing -1 (Initializing) -> 0 (No-Media)
D/Vold ( 187): Volume sdc state changing -1 (Initializing) -> 0 (No-Media)
D/Vold ( 187): Volume sdd state changing -1 (Initializing) -> 0 (No-Media)
D/Vold ( 187): Volume sde state changing -1 (Initializing) -> 0 (No-Media)
D/Vold ( 187): Volume sdf state changing -1 (Initializing) -> 0 (No-Media)
E/qdhwcomposer( 213): copybit open in hwcInitcontext.....
E/qdhwcomposer( 213): constructor for copybit
I/Adreno200-C2D( 213): <c2d_wrapper_init:137>: C2D2 initializing a3xx version: libc2d2_a3xx.so
I/Adreno200-C2D( 213): <c2d_wrapper_init:208>: C2D2 wrapper initialized successfully
I/Adreno200-C2D( 213): <c2d_cmd_res_init:135>: Allocate CMD Buffer Address 0x41069000 0x10000000
I/Adreno200-C2D( 213): <c2d_surface_template_res_init:646>: SURFACE_Template Memory Allocated 20 0x400c5008 0x4002c8f0
I/Xposed ( 214): -----------------
I/Xposed ( 214): Found new Xposed jar version, activating it
I/Xposed ( 214): Added Xposed (/data/xposed/XposedBridge.jar) to CLASSPATH.
D/AndroidRuntime( 214):
D/AndroidRuntime( 214): >>>>>> AndroidRuntime START de.robv.android.xposed.XposedBridge <<<<<<
D/AndroidRuntime( 214): CheckJNI is OFF
D/AndroidRuntime( 214): setted country_code = Germany
D/AndroidRuntime( 214): setted countryiso_code = DE
D/AndroidRuntime( 214): setted sales_code = DBT
D/AndroidRuntime( 214): readGMSProperty: start
D/AndroidRuntime( 214): readGMSProperty: end
D/AndroidRuntime( 214): addProductProperty: start
D/qdoverlay( 213): initoverlay:: opening the device:: /dev/graphics/fb0
D/qdoverlay( 213): initoverlay:: opening the device:: /dev/graphics/fb1
D/qdoverlay( 213): ndx=6 num=5 z_order=-1
D/qdoverlay( 213): initoverlay:: opening the device:: /dev/graphics/fb2
I/Encryption( 187): Vold 2.1 (the revenge) firing up
E/Encryption( 187): created DirEncryptionManager
D/Diag_Lib( 202): StartMulticlient:
D/Diag_Lib( 202): StartMulticlient() START
D/Diag_Lib( 202): StartMulticlient() fd=16 END
D/Diag_Lib( 202): [TID] MulticlientLoop(531)
D/Diag_Lib( 202): MulticlientLoop start...
D/Diag_Lib( 202): set_multiclient_max_fd:
D/Diag_Lib( 202): set_multiclient_max_fd: maxfd=16
D/Diag_Lib( 202): set_multiclient_fd_set:
D/Vold ( 187): Volume sdcard state changing -1 (Initializing) -> 0 (No-Media)
D/Encryption( 187): enable android secure container 'sdcard'
D/Vold ( 187): Volume sda state changing -1 (Initializing) -> 0 (No-Media)
D/Vold ( 187): Volume sdb state changing -1 (Initializing) -> 0 (No-Media)
D/Vold ( 187): Volume sdc state changing -1 (Initializing) -> 0 (No-Media)
D/Vold ( 187): Volume sdd state changing -1 (Initializing) -> 0 (No-Media)
D/Vold ( 187): Volume sde state changing -1 (Initializing) -> 0 (No-Media)
D/Vold ( 187): Volume sdf state changing -1 (Initializing) -> 0 (No-Media)
E/qdhwcomposer( 213): copybit open in hwcInitcontext.....
E/qdhwcomposer( 213): constructor for copybit
I/Adreno200-C2D( 213): <c2d_wrapper_init:137>: C2D2 initializing a3xx version: libc2d2_a3xx.so
I/Adreno200-C2D( 213): <c2d_wrapper_init:208>: C2D2 wrapper initialized successfully
I/Adreno200-C2D( 213): <c2d_cmd_res_init:135>: Allocate CMD Buffer Address 0x41069000 0x10000000
I/Adreno200-C2D( 213): <c2d_surface_template_res_init:646>: SURFACE_Template Memory Allocated 20 0x400c5008 0x4002c8f0

hi dear friends i have updated! to new Wallet 2.0 have a try.

Serius problem, memory corruption or something

I started having this problem one day when the phone fell to the ground while some apps were updated from the play store, I've done hard resets, I've installed everything from scratch and I still have this problem although I still have not tried installing another rom, After I took my cell phone from the ground, I turned it on and went into a bootloop but it was not any bootloop, It went into "Starting Android" and then went back to the start animation, I have solved this problem uninstalling all the apps deleting files with ADB in /data/app but when I install any app it happens again, besides the system starts sending app crash reports whenever It tries to open any application that need access that memory address, for example the Launcher or the Applications section of android settings. I read that it could be a persistent partition corruption, but i haven't found any information.
my device is a Samsung Galaxy J5 M [SM-J500M]
i have CUSTOM ROM CYANOGEN MOD 12.1 PREMIUM SPEED BY ZONIK SAMSUNG J500M/F/FN/G/Y/07 rom
found here
Code:
mega.co.nz/#!CJMWQKwB!RdhHCOzxfNGi1_2vvenoibLhp1j_k4EaPC1-H4DpYvc
and i can provide you with some debug trace of the error when i try to open Aplications in Android settings.
logcat:
Code:
I/Timeline( 6745): Timeline: Activity_launch_request id:com.android.settings time:996754
I/ActivityManager( 791): START u0 {act=android.intent.action.MAIN cmp=com.android.settings/.SubSettings (has extras)} from uid 1000 on display 0
D/audio_hw_primary( 291): start_output_stream: enter: stream(0xb7692370)usecase(1: low-latency-playback) devices(0x2)
V/audio_hw_primary( 291): select_devices: ENTER
V/audio_hw_primary( 291): select_devices: usecase(normal)
V/audio_hw_primary( 291): select_devices: usecase(PCM_PLAYBACK)
V/msm8974_platform( 291): platform_get_output_snd_device: enter: output devices(0x2)
V/msm8974_platform( 291): get_OUTPUT_snd_device: for Normal Playback
V/msm8974_platform( 291): platform_get_output_snd_device: exit: snd_device(speaker)
D/audio_hw_primary( 291): select_devices: out_snd_device(2: speaker)
D/audio_hw_primary( 291): select_devices: in_snd_device(0: dummy)
D/hardware_info( 291): hw_info_append_hw_type : device_name = speaker
V/msm8974_platform( 291): platform_send_audio_calibration: sending audio calibration for snd_device(2) acdb_id(15)
D/ACDB-LOADER( 291): ACDB -> send_audio_cal, acdb_id = 15, path = 0
D/ACDB-LOADER( 291): ACDB -> send_asm_topology
D/ACDB-LOADER( 291): ACDB -> ACDB_CMD_GET_AUDPROC_STREAM_TOPOLOGY_ID
D/ACDB-LOADER( 291): ACDB -> send_adm_topology
D/ACDB-LOADER( 291): ACDB -> ACDB_CMD_GET_AUDPROC_COMMON_TOPOLOGY_ID
D/ACDB-LOADER( 291): ACDB -> send_audtable
D/ACDB-LOADER( 291): ACDB -> ACDB_CMD_GET_AUDPROC_COMMON_TABLE
D/ACDB-LOADER( 291): ACDB -> AUDIO_SET_AUDPROC_CAL
D/ACDB-LOADER( 291): ACDB -> send_audvoltable
D/ACDB-LOADER( 291): ACDB -> ACDB_CMD_GET_AUDPROC_GAIN_DEP_STEP_TABLE
D/ACDB-LOADER( 291): ACDB -> AUDIO_SET_AUDPROC_VOL_CAL
D/ACDB-LOADER( 291): ACDB -> send_afe_cal
D/ACDB-LOADER( 291): ACDB -> ACDB_CMD_GET_AFE_COMMON_TABLE
D/ACDB-LOADER( 291): ACDB -> AUDIO_SET_AFE_CAL
D/ACDB-LOADER( 291): ACDB -> send_hw_delay : acdb_id = 15 path = 0
D/ACDB-LOADER( 291): ACDB -> ACDB_AVSYNC_INFO: ACDB_CMD_GET_DEVICE_PROPERTY
V/audio_hw_primary( 291): enable_snd_device: snd_device(2: speaker, speaker)
D/audio_route( 291): ++++ audio_route_update_path ==============
D/audio_route( 291): Setting mixer control: MI2S_RX Channels, value: 1
D/audio_route( 291): Setting mixer control: RX3 MIX1 INP1, value: 3
V/WindowManager( 791): addAppToken: AppWindowToken{2bf62761 token=Token{2dd43ac8 ActivityRecord{db06f6b u0 com.android.settings/.SubSettings t2767}}} to stack=1 task=2767 at 1
D/audio_route( 291): Setting mixer control: RX3 MIX1 INP2, value: 4
D/audio_route( 291): Setting mixer control: SPK DAC Switch, value: 1
D/audio_route( 291): Setting mixer control: Speaker Boost, value: 1
D/audio_route( 291): Setting mixer control: RX3 Digital Volume, value: 87
D/audio_route( 291): ---- audio_route_update_path ==============
D/audio_route( 291): ++++ audio_route_update_mixer ==============
D/audio_route( 291): ------ audio_route_update_mixer ==============
V/audio_hw_primary( 291): enable_audio_route: enter: usecase(1)
V/audio_hw_primary( 291): enable_audio_route: apply mixer path: low-latency-playback
D/audio_route( 291): ++++ audio_route_update_mixer ==============
D/audio_route( 291): Setting mixer control: PRI_MI2S_RX Audio Mixer MultiMedia5, value: 1
D/audio_route( 291): ------ audio_route_update_mixer ==============
V/audio_hw_primary( 291): enable_audio_route: exit
V/msm8974_platform( 291): platform_get_output_snd_device: enter: output devices(0x2)
V/msm8974_platform( 291): get_OUTPUT_snd_device: for Normal Playback
V/msm8974_platform( 291): platform_get_output_snd_device: exit: snd_device(speaker)
V/msm8974_platform( 291): platform_send_audio_calibration: sending audio calibration for snd_device(2) acdb_id(15)
D/ACDB-LOADER( 291): ACDB -> send_audio_cal, acdb_id = 15, path = 0
D/ACDB-LOADER( 291): ACDB -> send_asm_topology
D/ACDB-LOADER( 291): ACDB -> ACDB_CMD_GET_AUDPROC_STREAM_TOPOLOGY_ID
D/ACDB-LOADER( 291): ACDB -> send_adm_topology
D/ACDB-LOADER( 291): ACDB -> ACDB_CMD_GET_AUDPROC_COMMON_TOPOLOGY_ID
D/ACDB-LOADER( 291): ACDB -> send_audtable
D/ACDB-LOADER( 291): ACDB -> ACDB_CMD_GET_AUDPROC_COMMON_TABLE
D/ACDB-LOADER( 291): ACDB -> AUDIO_SET_AUDPROC_CAL
D/ACDB-LOADER( 291): ACDB -> send_audvoltable
D/ACDB-LOADER( 291): ACDB -> ACDB_CMD_GET_AUDPROC_GAIN_DEP_STEP_TABLE
D/ACDB-LOADER( 291): ACDB -> AUDIO_SET_AUDPROC_VOL_CAL
D/ACDB-LOADER( 291): ACDB -> send_afe_cal
D/ACDB-LOADER( 291): ACDB -> ACDB_CMD_GET_AFE_COMMON_TABLE
D/ACDB-LOADER( 291): ACDB -> AUDIO_SET_AFE_CAL
D/ACDB-LOADER( 291): ACDB -> send_hw_delay : acdb_id = 15 path = 0
D/ACDB-LOADER( 291): ACDB -> ACDB_AVSYNC_INFO: ACDB_CMD_GET_DEVICE_PROPERTY
V/audio_hw_primary( 291): start_output_stream: Opening PCM device card_id(0) device_id(12)
V/audio_hw_primary( 291): start_output_stream: exit
D/SubSettings( 6745): Launching fragment com.android.settings.applications.ManageApplications
W/ContextImpl( 6745): Calling a method in the system process without a qualified user: android.app.ContextImpl.bindService:1787 android.content.ContextWrapper.bindService:545 com.android.settings.applications.ManageApplications.onCreate:894 android.app.Fragment.performCreate:2031 android.app.FragmentManagerImpl.moveToState:863
V/WindowManager( 791): Adding window Window{2586aad1 u0 com.android.settings/com.android.settings.SubSettings} at 5 of 8 (after Window{c61c1e7 u0 com.android.settings/com.android.settings.Settings})
I/ActivityManager( 791): Displayed com.android.settings/.SubSettings: +1s69ms
I/GoogleInputMethod( 2702): onFinishInput() : Dummy InputConnection bound
I/GoogleInputMethod( 2702): onStartInput() : Dummy InputConnection bound
W/ResourceType( 6745): No package identifier when getting value for resource number 0x00000000
W/PackageManager( 6745): Failure retrieving resources for com.google.android.onetimeinitializer: Resource ID #0x0
I/Timeline( 6745): Timeline: Activity_idle id: [email protected] time:998100
F/libc ( 6745): invalid address or address of corrupt block 0x23 passed to dlfree
F/libc ( 6745): Fatal signal 11 (SIGSEGV), code 1, fault addr 0xdeadbaad in tid 6873 (onsState.Loader)
I/DEBUG ( 288): property debug.db.uid not set; NOT waiting for gdb.
I/DEBUG ( 288): HINT: adb shell setprop debug.db.uid 100000
I/DEBUG ( 288): HINT: adb forward tcp:5039 tcp:5039
I/Timeline( 791): Timeline: Activity_windows_visible id: ActivityRecord{db06f6b u0 com.android.settings/.SubSettings t2767} time:998209
I/DEBUG ( 288): *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** ***
I/DEBUG ( 288): Build fingerprint: 'samsung/j5ltexx/unknown:5.1.1/LMY49J/c2fef168b1:userdebug/test-keys'
I/DEBUG ( 288): Revision: '5'
I/DEBUG ( 288): ABI: 'arm'
I/DEBUG ( 288): pid: 6745, tid: 6873, name: onsState.Loader >>> com.android.settings <<<
I/DEBUG ( 288): signal 11 (SIGSEGV), code 1 (SEGV_MAPERR), fault addr 0xdeadbaad
I/DEBUG ( 288): Abort message: 'invalid address or address of corrupt block 0x23 passed to dlfree'
I/DEBUG ( 288): r0 00000000 r1 b6e23dec r2 deadbaad r3 00000000
I/DEBUG ( 288): r4 00000023 r5 b6e250d8 r6 99546000 r7 0000002b
I/DEBUG ( 288): r8 a13505bc r9 a135067c sl b6cf7272 fp b6cf727b
I/DEBUG ( 288): ip 00008000 sp a1350568 lr b6df4f07 pc b6df4f08 cpsr 600d0030
I/DEBUG ( 288):
I/DEBUG ( 288): backtrace:
I/DEBUG ( 288): #00 pc 00028f08 /system/lib/libc.so (dlfree+1239)
I/DEBUG ( 288): #01 pc 0000f363 /system/lib/libc.so (free+10)
I/DEBUG ( 288): #02 pc 00012b15 /system/lib/libandroidfw.so (_ZN7android13ResStringPool6uninitEv+38)
I/DEBUG ( 288): #03 pc 0001384f /system/lib/libandroidfw.so (_ZN7android10ResXMLTree6uninitEv+12)
I/DEBUG ( 288): #04 pc 0001386d /system/lib/libandroidfw.so (_ZN7android10ResXMLTreeD1Ev+4)
I/DEBUG ( 288): #05 pc 0001053b /system/lib/libandroidfw.so (_ZN7android12AssetManager10getPkgNameEPKc+258)
I/DEBUG ( 288): #06 pc 0001059d /system/lib/libandroidfw.so (_ZN7android12AssetManager18getBasePackageNameEj+68)
I/DEBUG ( 288): #07 pc 000822cf /system/lib/libandroid_runtime.so
I/DEBUG ( 288): #08 pc 0027b38b /data/dalvik-cache/arm/[email protected]@boot.oat
I/DEBUG ( 288):
I/DEBUG ( 288): Tombstone written to: /data/tombstones/tombstone_01
I/BootReceiver( 791): Copying /data/tombstones/tombstone_01 to DropBox (SYSTEM_TOMBSTONE)
W/ActivityManager( 791): Process com.android.settings has crashed too many times: killing!
W/ActivityManager( 791): Force finishing activity 4 com.android.settings/.SubSettings
W/ActivityManager( 791): Force finishing activity 4 com.android.settings/.Settings
W/ActivityManager( 791): Wtf, activity ActivityRecord{380996b1 u0 com.android.settings/.Settings t2767 f} in proc activity list not using proc ProcessRecord{4a20df5 6745:com.android.settings/1000}?!?
W/ActivityManager( 791): Wtf, activity ActivityRecord{db06f6b u0 com.android.settings/.SubSettings t2767 f} in proc activity list not using proc ProcessRecord{4a20df5 6745:com.android.settings/1000}?!?
E/lowmemorykiller( 276): Error writing /proc/6745/oom_score_adj; errno=22
I/ActivityManager( 791): Killing 6745:com.android.settings/1000 (adj 9): crash
I/DeviceScanner( 3230): [MDNS] Received response from "LaWeaWeonQlo" (ae3e11b29fd758c5a27837b5c44262b3) with result "0 No change"
I/WindowState( 791): WIN DEATH: Window{c61c1e7 u0 com.android.settings/com.android.settings.Settings}
D/WifiService( 791): Client connection lost with reason: 4
I/Zygote ( 302): Process 6745 exited due to signal (11)
W/ActivityManager( 791): Spurious death for ProcessRecord{4a20df5 0:com.android.settings/1000}, curProc for 6745: null
W/ResourceType( 2410): No package identifier when getting value for resource number 0x00000000
W/PackageManager( 2410): Failure retrieving resources for com.android.settings: Resource ID #0x0
W/InputMethodManagerService( 791): Got RemoteException sending setActive(false) notification to pid 6745 uid 1000
I/GoogleInputMethod( 2702): onFinishInput() : Dummy InputConnection bound
I/GoogleInputMethod( 2702): onStartInput() : Dummy InputConnection bound
W/ajjl ( 2779): Empty context buffer. Thus might mean that the context is not synced down.
W/ajfs ( 2779): Empty context model while retrieving upload opt-in status!
I/Timeline( 2410): Timeline: Activity_idle id: [email protected] time:999085
I/Timeline( 791): Timeline: Activity_windows_visible id: ActivityRecord{e961ecf u0 com.android.systemui/.recents.RecentsActivity t2770} time:999100
W/ajjl ( 2779): Empty context buffer. Thus might mean that the context is not synced down.
W/ajfs ( 2779): Empty context model while retrieving upload opt-in status!
V/audio_hw_primary( 291): out_standby: enter: usecase(1: low-latency-playback)
V/audio_hw_primary( 291): stop_output_stream: enter: usecase(1: low-latency-playback)
V/audio_hw_primary( 291): disable_audio_route: enter: usecase(1)
V/audio_hw_primary( 291): disable_audio_route: reset mixer path: low-latency-playback
D/audio_route( 291): ++++ audio_route_update_mixer ==============
D/audio_route( 291): Setting mixer control: PRI_MI2S_RX Audio Mixer MultiMedia5, value: 0
D/audio_route( 291): ------ audio_route_update_mixer ==============
V/audio_hw_primary( 291): disable_audio_route: exit
D/hardware_info( 291): hw_info_append_hw_type : device_name = speaker
V/audio_hw_primary( 291): disable_snd_device: snd_device(2: speaker)
D/audio_route( 291): ++++ audio_route_update_path ==============
D/audio_route( 291): Setting mixer control: RX3 Digital Volume, value: 84
D/audio_route( 291): Setting mixer control: Speaker Boost, value: 0
D/audio_route( 291): Setting mixer control: SPK DAC Switch, value: 0
D/audio_route( 291): Setting mixer control: RX3 MIX1 INP2, value: 0
D/audio_route( 291): Setting mixer control: RX3 MIX1 INP1, value: 0
D/audio_route( 291): Setting mixer control: MI2S_RX Channels, value: 0
D/audio_route( 291): ---- audio_route_update_path ==============
V/audio_hw_primary( 291): stop_output_stream: exit: status(0)
V/audio_hw_primary( 291): out_standby: exit
and the /data/tombstones/tombstone_01 on pastebin
Code:
pastebin.com/jwZGN4Qr
sorry but i have recently signed up in XDA so i cant post links

Bumping, also, update i think it memory corruption because it isn't something linked directly to an aplication, i think it crash the app that tries to use that segment with a segfault sometimes crashes the launcher, sometimes the Settings, now i just installed tumblr from playstore and it just simply crashes with Segmentation fault deadbaad. in the time my cellphone fell, i use to link apps to MicroSD, thats the only thing i have not formatted, should i?

bump :c

com.android.phone crashes after ppp connects

This is related to custom build of Android 5.1 and I have exhausted time on this and posted on a few Google groups but there is no activity on them.
I have a FriendlyArm NanoPC T3 Plus board and I wanted to add GSM to this as the stock image does not support it. I can build the image and done a few tweaks to get landscape mode etc. All that works.
No I added a SIM5320E modem and the SIMCOM RIL in binary format. After a bit of work with SELinux policies, I can get this to dial up PPP and make the connection and I can see this in the logcat. BUT, right after this com.android.phone crashes and pops up a message on the LCD. I click OK and it then repeats the process and crashes again. Below is the logcat capture of the connection and crash. It appears to be a file exception but I can't find digging through the code which file it might be.
I have disable SELinux in the kernel build to remove any issues with policies but get the same result.
java.lang.SecurityException: Package android does not belong to 1001 in the log output seems to be something to look into but all I can find is that 1001 belongs to the phone process.
Stuck on this for a few weeks now and getting nowhere so appreciate any pointers or if you have had a similar issue?
Code:
I//system/bin/pppd( 2924): pppd 2.4.3 started by root, uid 0
I/chat ( 2926): abort on (BUSY)
I/chat ( 2926): abort on (NO CARRIER)
I/chat ( 2926): abort on (ERROR)
I/chat ( 2926): abort on (+CME ERROR: 100)
I/chat ( 2926): timeout set to 8 seconds
I/chat ( 2926): send (ATE0Q0V1^M)
I/chat ( 2926): expect (OK)
I/chat ( 2926): ^M
I/chat ( 2926): OK
I/chat ( 2926): -- got it
I/chat ( 2926): send (ATD*99***1#^M)
I/chat ( 2926): expect (CONNECT)
I/chat ( 2926): ^M
I/chat ( 2926): ^M
I/chat ( 2926): CONNECT
I/chat ( 2926): -- got it
I/pppd ( 2924): Serial connection established.
D/pppd ( 2924): using channel 9
I/pppd ( 2924): Using interface ppp0
I/pppd ( 2924): Connect: ppp0 <--> /dev/ttyUSB3
D/pppd ( 2924): sent [LCP ConfReq id=0x1 <mru 1280> <asyncmap 0x0> <magic 0x59f9be6b> <pcomp> <accomp>]
D/pppd ( 2924): rcvd [LCP ConfReq id=0x10 <asyncmap 0x0> <auth chap MD5> <magic 0x332fad98> <pcomp> <accomp>]
D/pppd ( 2924): sent [LCP ConfAck id=0x10 <asyncmap 0x0> <auth chap MD5> <magic 0x332fad98> <pcomp> <accomp>]
D/pppd ( 2924): rcvd [LCP ConfAck id=0x1 <mru 1280> <asyncmap 0x0> <magic 0x59f9be6b> <pcomp> <accomp>]
D/pppd ( 2924): rcvd [LCP DiscReq id=0x11 magic=0x332fad98]
D/pppd ( 2924): rcvd [CHAP Challenge id=0x1 <c81669cbcc0c57607c5609f38a630dea>, name = "UMTS_CHAP_SRVR"]
D/pppd ( 2924): sent [CHAP Response id=0x1 <7b4baf8d89cc6dc0bac854ee8c6e86a0>, name = "wap"]
D/pppd ( 2924): rcvd [CHAP Success id=0x1 ""]
I/pppd ( 2924): CHAP authentication succeeded
D/pppd ( 2924): sent [CCP ConfReq id=0x1 <deflate 15> <deflate(old#) 15> <bsd v1 15>]
D/pppd ( 2924): sent [IPCP ConfReq id=0x1 <addr 0.0.0.0> <ms-dns1 0.0.0.0> <ms-dns3 0.0.0.0>]
D/pppd ( 2924): rcvd [LCP ProtRej id=0x12 80 fd 01 01 00 0f 1a 04 78 00 18 04 78 00 15 03 2f]
D/pppd ( 2924): rcvd [IPCP ConfNak id=0x1 <ms-dns1 10.11.12.13> <ms-dns3 10.11.12.14> <ms-wins 10.11.12.13> <ms-wins 10.11.12.14>]
D/pppd ( 2924): sent [IPCP ConfReq id=0x2 <addr 0.0.0.0> <ms-dns1 10.11.12.13> <ms-dns3 10.11.12.14>]
D/pppd ( 2924): rcvd [IPCP ConfNak id=0x2 <ms-dns1 10.11.12.13> <ms-dns3 10.11.12.14> <ms-wins 10.11.12.13> <ms-wins 10.11.12.14>]
D/pppd ( 2924): sent [IPCP ConfReq id=0x3 <addr 0.0.0.0> <ms-dns1 10.11.12.13> <ms-dns3 10.11.12.14>]
D/pppd ( 2924): rcvd [IPCP ConfNak id=0x3 <ms-dns1 10.11.12.13> <ms-dns3 10.11.12.14> <ms-wins 10.11.12.13> <ms-wins 10.11.12.14>]
D/pppd ( 2924): sent [IPCP ConfReq id=0x4 <addr 0.0.0.0> <ms-dns1 10.11.12.13> <ms-dns3 10.11.12.14>]
D/pppd ( 2924): rcvd [IPCP ConfNak id=0x4 <ms-dns1 10.11.12.13> <ms-dns3 10.11.12.14> <ms-wins 10.11.12.13> <ms-wins 10.11.12.14>]
D/pppd ( 2924): sent [IPCP ConfReq id=0x5 <addr 0.0.0.0> <ms-dns1 10.11.12.13> <ms-dns3 10.11.12.14>]
D/pppd ( 2924): rcvd [IPCP ConfReq id=0x8]
D/pppd ( 2924): sent [IPCP ConfNak id=0x8 <addr 0.0.0.0>]
D/pppd ( 2924): rcvd [IPCP ConfRej id=0x5 <ms-dns3 10.11.12.14>]
D/pppd ( 2924): sent [IPCP ConfReq id=0x6 <addr 0.0.0.0> <ms-dns1 10.11.12.13>]
D/pppd ( 2924): rcvd [IPCP ConfReq id=0x9]
D/pppd ( 2924): sent [IPCP ConfAck id=0x9]
D/pppd ( 2924): rcvd [IPCP ConfNak id=0x6 <addr 10.11.240.107> <ms-dns1 192.168.39.28>]
D/pppd ( 2924): sent [IPCP ConfReq id=0x7 <addr 10.11.240.107> <ms-dns1 192.168.39.28>]
D/pppd ( 2924): rcvd [IPCP ConfAck id=0x7 <addr 10.11.240.107> <ms-dns1 192.168.39.28>]
W/pppd ( 2924): Could not determine remote IP address: defaulting to 10.64.64.64
I/pppd ( 2924): local IP address 10.11.240.107
I/pppd ( 2924): remote IP address 10.64.64.64
I/pppd ( 2924): primary DNS address 192.168.39.28
I/pppd ( 2924): secondary DNS address 10.11.12.14
D/TelephonyProvider( 2868): subIdString = 1 subId = 1
W/AppOps ( 416): Bad call: specified package android under uid 1001 but it is really 1000
D/TelephonyProvider( 2868): subIdString = 1 subId = 1
D/ConnectivityService( 416): setProvNotificationVisible: E visible=false networkType=0 action=com.android.internal.telephony.PROVISION0
E/AndroidRuntime( 2868): FATAL EXCEPTION: DcHandlerThread
E/AndroidRuntime( 2868): Process: com.android.phone, PID: 2868
E/AndroidRuntime( 2868): java.lang.SecurityException: Package android does not belong to 1001
E/AndroidRuntime( 2868): at android.os.Parcel.readException(Parcel.java:1546)
E/AndroidRuntime( 2868): at android.os.Parcel.readException(Parcel.java:1499)
E/AndroidRuntime( 2868): at android.net.IConnectivityManager$Stub$Proxy.registerNetworkAgent(IConnectivityManager.java:2030)
E/AndroidRuntime( 2868): at android.net.ConnectivityManager.registerNetworkAgent(ConnectivityManager.java:2001)
E/AndroidRuntime( 2868): at android.net.NetworkAgent.<init>(NetworkAgent.java:145)
E/AndroidRuntime( 2868): at com.android.internal.telephony.dataconnection.DataConnection$DcNetworkAgent.<init>(DataConnection.java:1958)
E/AndroidRuntime( 2868): at com.android.internal.telephony.dataconnection.DataConnection$DcActiveState.enter(DataConnection.java:1735)
E/AndroidRuntime( 2868): at com.android.internal.util.StateMachine$SmHandler.invokeEnterMethods(StateMachine.java:1008)
E/AndroidRuntime( 2868): at com.android.internal.util.StateMachine$SmHandler.performTransitions(StateMachine.java:854)
E/AndroidRuntime( 2868): at com.android.internal.util.StateMachine$SmHandler.handleMessage(StateMachine.java:800)
E/AndroidRuntime( 2868): at android.os.Handler.dispatchMessage(Handler.java:102)
E/AndroidRuntime( 2868): at android.os.Looper.loop(Looper.java:135)
E/AndroidRuntime( 2868): at android.os.HandlerThread.run(HandlerThread.java:61)
D/ConnectivityService( 416): setProvNotificationVisibleIntent: E visible=false networkType=0 extraInfo=null
W/ActivityManager( 416): Process com.android.phone has crashed too many times: killing!
I/OpenGLRenderer( 416): Initialized EGL, version 1.4
E/[EGL-ERROR]( 416): EGLBoolean __egl_platform_create_surface_window(egl_surface*, mali_base_ctx_handle):933: =========> usage 0x900

OK. I have finally tracked this down and fixed it so that it can work but the issue that causes this is still in the code.
The fault is caused when NetworkMonitor handles the CAPTIVE_PORTAL_SERVER using the property ro.net.captive_server in setprop.
Code:
mServer = Settings.Global.getString(mContext.getContentResolver(),
Settings.Global.CAPTIVE_PORTAL_SERVER);
if (mServer == null) {
mServer = SystemProperties.get("ro.net.captive_server");
if (mServer == null || mServer.length() == 0) {
mServer = DEFAULT_SERVER;
} else {
Settings.Global.putString(mContext.getContentResolver(),
Settings.Global.CAPTIVE_PORTAL_SERVER, mServer);
}
}
By commenting out the ro.net.captive_portal in the setprop file, the connection now uses the default server for connection checking.
The fault lies in the line where Settings.Global.putString is called. This causes an exception. Why? I do not yet know.
By removing the property, the PPP connection now works 100%