Related
EDITED
just found anoher thread about it soz, pls mod remove this
ahassouna said:
Hi all:
i've been playing around with some ROMS lately; some of us do use the arabizer application which enables you to read and write arabic language and also installs some other minor arabic programs on your device.
i have noticed some issues with some ROMS and need help in solving them, here are my observations:
Diamond Roms till V8 work with arabizer, but ofcourse the keyboard issue doesn't allow you to use the arabic keyboard and you need to install the IM default cab to get it to work.
Death Roms till v4.1 do not work at all; you just get install unsuccessfull even before it starts to install on first block, tried:
1- install from fresh upgrade didn't work
2- install from hard reset did not work.
3- installed net cf 2 and chose as default, did not work
4- installed net cf 3.5 on cf 2 and chose 3.5 as default did not work
5- tried on another handset still doesn't work
6- tried intsall on SD card
iat first i thought it was framework issue but i think it's not, it has to be something in the core which i know nothing about.
tried the ryV5 rom also has the same problem as death roms and would not install.
Can anyone help find a solution to this please as it would be great to get it to work on death and ryV5 roms and should be intresting to know why such application would not work, it might help in near future for other applications.
note: i chose to make a thread about this as i cannot post same question in each ROM thread
Regards,
Hasso
Click to expand...
Click to collapse
I have installed In4mobility software on all of the cooked 6.1 ROMs and it is running fine. The only issue I have is it always defaults to Arabic Keyboard, even when in same session but switching between programs. Other than that it is running great. I would install on Main Mem,,,,, avoid installing on SD card, it will become buggy, and might cause freezing.
Do a search for Informobility software. It is not that expensive.
asfoor said:
I have installed In4mobility software on all of the cooked 6.1 ROMs and it is running fine. The only issue I have is it always defaults to Arabic Keyboard, even when in same session but switching between programs. Other than that it is running great. I would install on Main Mem,,,,, avoid installing on SD card, it will become buggy, and might cause freezing.
Do a search for Informobility software. It is not that expensive.
Click to expand...
Click to collapse
i know it works but not the keyboard, and it crashes the device n regular bases and makes it really slow
imaginet arabizer is always the best choice
Is there anyone who can tell me why the either of the following themed MT keyboards will not currently work?
http://forum.xda-developers.com/showthread.php?t=769358
http://forum.xda-developers.com/showthread.php?t=769358&page=7
I'm on rubiX, and I'm simply unable to install these damn things. I can get the stock MT keyboard to install, and even WDJ's blacked out MT keyboard (if I install it over the stock one), but neither of these will work. Would a special lib file be necessary or something? Is there some specific order of operation necessary?
I really love my custom rom (Eternal Prophecy v5.9) but the developer changed the stock froyo keyboard to a custom keyboard (gingerbread style). Does anyone know how to get the stock keyboard (froyo style) back on custom roms that have custom keyboards? Thanks!
Extract the keyboard apk from the stock rom's zip file..should be able to find that somewhere on your phones development thread, and use win7zip to delete the keyboard in your new zip file and replace it with the stock. Reflash the ROM (no need to wipe) and good to go.
This is an extremely simple ROM modification to the standard Advent Vega 1.10 system image that only alters a couple of things. These are as follows:
/system partition size increased from 128mb to 155mb. (The reason for this will be explained below)
su and SuperUser.apk added - You can use root apps as standard now.
ClockworkMod Recovery built-in.
Added Pauls simple recovery reboot app to get into CWM recovery.
That's all! No google apps, nothing else, just these simple changes. This isn't intended to be used as an everyday ROM (although there is no reason why you couldn't).
The main reason for this, is to be used as ROM base for VegaComb (and any other ROM you wish to use). I have been struggling with the Vega's default partition sizes while trying to port Honeycomb, and rather than spending tons of time trying to make stuff way smaller than it was ever intended to be, this seems like the better option.
So, flash this in nVflash recovery mode (exactly the same as the stock 1.10 image) and off you go. Done. No need to do anything else. You can use this base with any ROM, the ONLY downside is that 30mb of storage has been re-allocated from /data to /system, which most people won't even notice.
ALL future versions of VegaComb will require that you use this modded system image as a base (as they will require more than 125mb of /system space). To return your partitions back to the way they were, just re-flash the stock 1.10 image from www.myadventvega.co.uk (this is the ONLY way to restore your partition sizes, restoring from a Nandroid backup will NOT change your partition sizes back). You DON'T have to return to stock when you want to switch from using VegaComb, all other ROMs should work perfectly fine on top of this base, including Corvus5 and CM7.
Also, it's handy to have this in case you brick your Vega as CWM is pre-installed
AS ALWAYS MAKE SURE YOU NANDROID BACKUP BEFORE FLASHING ANYTHING!
Download ModdedStock_1.10 v2 Here!
Woo Hoo, good sign for things to come
Good work, Love the idea of a bigger /system..saves a lot of messing around moving apps to /data. Cheers. Paul
Just can't get this to install :-(
Keeps coming up with unknown device found!!
Ooops, forgot to plug the charger in.........sorry :-(
I use ubuntu will this work through wine or would i be better off trying to borrow a windows MC
Flash without usb cable?
Is there a way to flash this ROM without using the USB cable and recovery mode since my VPAD10s is giving a huge pain with windows 7 and the driver so I can not make it work.
Is there a version to be used with rom manager?
Thanks guys.
You need to use your PC because this ROM changes the partition sizes in the internal memory, and you need a PC program (nvflash) for that purpose.
Damn! thanks Logseman, I will keep on trying to get my tablet recognized over w7 can´t believe it´s so hard to make it work. wish me luck
Hope over to the Modaco Vega forum and search for YAUDIG and AUDI. They'll get the drivers installed for you.
simonta said:
Hope over to the Modaco Vega forum and search for YAUDIG and AUDI. They'll get the drivers installed for you.
Click to expand...
Click to collapse
Thanks simonta, already tried AUDI´s soft but no luck.
I´m starting to think that the issue might be with my pc/w7.
Great stuff!
Rgds
Lok
Hi:
Currently using vegacomb 0.6, i want to nandroid backup, install the new Rom base, then nandroid restore, and then upgrade to vegacomb 0.7 via the upgrade patch, in order not to loose all my settings.
So I would like to do a Nandroid backup, but being Android illiterate, i havent found how to do it in vegacomb 0.7.
Another question is , as I have moved most apps to SD, if there would be any problem regarding the base rom change and nandroid bacup-restore
Thanks for any hint/pointer
Which gapps should I use it for this built?
Zebwen said:
This is an extremely simple ROM modification to the standard Advent Vega 1.10 system image that only alters a couple of things. These are as follows:
/system partition size increased from 128mb to 155mb. (The reason for this will be explained below)
su and SuperUser.apk added - You can use root apps as standard now.
ClockworkMod Recovery built-in.
Added Pauls simple recovery reboot app to get into CWM recovery.
That's all! No google apps, nothing else, just these simple changes. This isn't intended to be used as an everyday ROM (although there is no reason why you couldn't).
The main reason for this, is to be used as ROM base for VegaComb (and any other ROM you wish to use). I have been struggling with the Vega's default partition sizes while trying to port Honeycomb, and rather than spending tons of time trying to make stuff way smaller than it was ever intended to be, this seems like the better option.
So, flash this in nVflash recovery mode (exactly the same as the stock 1.10 image) and off you go. Done. No need to do anything else. You can use this base with any ROM, the ONLY downside is that 30mb of storage has been re-allocated from /data to /system, which most people won't even notice.
ALL future versions of VegaComb will require that you use this modded system image as a base (as they will require more than 125mb of /system space). To return your partitions back to the way they were, just re-flash the stock 1.10 image from www.myadventvega.co.uk (this is the ONLY way to restore your partition sizes, restoring from a Nandroid backup will NOT change your partition sizes back). You DON'T have to return to stock when you want to switch from using VegaComb, all other ROMs should work perfectly fine on top of this base, including Corvus5 and CM7.
Also, it's handy to have this in case you brick your Vega as CWM is pre-installed
AS ALWAYS MAKE SURE YOU NANDROID BACKUP BEFORE FLASHING ANYTHING!
Download ModdedStock_1.10 v2 Here!
Click to expand...
Click to collapse
Thanks. one questions. Which gapps should I use for this built?
Thanks again.
hi, can i flashed this rom using CWM?
No, you can only flash it using a pc.
@all
Can someone please tell me how to use the nvflash, cause i'm clueless. I've searched using google but no luck, even on YouTube. I've downloaded nvflash but I can't work it. It keeps telling me about the drivers, although I installed the drivers. Any help would be great.
Thank you in advance.
jayk32 said:
@all
Can someone please tell me how to use the nvflash, cause i'm clueless. I've searched using google but no luck, even on YouTube. I've downloaded nvflash but I can't work it. It keeps telling me about the drivers, although I installed the drivers. Any help would be great.
Thank you in advance.
Click to expand...
Click to collapse
Hi
Switch off your Vega.
Connect it to the PC with the USB Cable.
Hold the power button on the Vega for 2 secs
Hold the back button while still holding the power button for a further 2 secs.
Release the power button but keep holding the back button for a further 2 secs.
You should now have a black screen and the Vega should be recognized on your PC (check in Control panel under USB for Nvidia Harmony or Shuttle)
The above assumes that you have installed the drivers.
Then open Modded Stock v1 or 2 which you should have already downloaded to the PC and it will install on the Vega (Vega will show NV Flash mopde across the top of the screen)
Once Modded stock is installed go to the apps menu and the recovery app is there. If you have already downloaded and put on your SD Card, the Vegacomb 9n Rom run the recovery and it will put you into CWM.
Wipe data, cache and in advanced the Dalvik cache.
Then select install from SD card and select the Rom and it will install.
If you continue to have problems Google Vegatools 4.1 and download and install
and it can do all the hard work.
Hope this helps
Stransky
Hi guys, sorry to hijack the thread an take it slightly off course but........
Buy flashing this stock modded rom, will it reset my touch screen issues? Read that its a pretty common problem.
I've tried the fix at modaco, and it works.......for a very brief period, then back to just half of my landscape screen being recognized?
I've only had my Vega a week, can any other of you more experianced fellows point me towards a fix? It would be much appreciated.
Sent from my VegaComb using xda premium
Thanks for a awesome rom.One questions,having problems with the sensor.Is there a simple solution to this?i have wiped dalvic cache but didnt help.I want to play games like NFS Shift and ather other games with sensor abilities.
Why not use Custom MTD ?
http://forum.xda-developers.com/showthread.php?t=717874
Hi guys, I am new here so try to be gentle.
This was the first time I've ever tried to do something with my phone (Nexus S) from the day I've bought it. (Ver 2.3.4)
I did my homework, and tried to install a new Mod.
I have tried many Roms from the last couple of days, but for some strange reason non of them worked fast enough (at least as my old version).
(well and the fact that it erased my SD card with all the info I've had there...)
The one version that looked ok from first sight was:
CyanogenMod 9 v4.0.3 v3.4 + CM Night builds
Now I'm having lots of different issues, and have no idea if someone already solved them, or should I just return to the working old version I had.
The first thing is -> I cannot move Apps to the SD storage, Under the Storage cattegory i have no option to choose to install apps on the SD (like I had with the old version), and under Apps - the "move to SD card" is Grey.
another thing is the languages, why do I see Chinese and other langauged by default and Im unable to uncheck them?
there are many more issues, but these are the most annoying ones for now.
I cannot reply to the version thread, so who can advice?
Thanks!
There are MANY roms for the Nexus. You just have to try a few and find one to your liking. The Chinese text you were talking about might of been an MIUI rom. They are based from China. When you go through the setup screen on each rom after you flash, make sure you choose the appropriate language to your liking.
On another hand. If you tried an ICS rom, then I think apps to sd don't work on Ice Cream Sandwich. I am not 100% sure, though. Please don't take my word for it.
Some roms might have bugs, some might work 100%. Just do the reading and flashing and learn from experience. Its the best way.
BTW. Welcome to XDA!
Well not quite.
mabry said:
There are MANY roms for the Nexus. You just have to try a few and find one to your liking. The Chinese text you were talking about might of been an MIUI rom. They are based from China. When you go through the setup screen on each rom after you flash, make sure you choose the appropriate language to your liking.
On another hand. If you tried an ICS rom, then I think apps to sd don't work on Ice Cream Sandwich. I am not 100% sure, though. Please don't take my word for it.
Some roms might have bugs, some might work 100%. Just do the reading and flashing and learn from experience. Its the best way.
BTW. Welcome to XDA!
Click to expand...
Click to collapse
The MOD is the most recent CM9 mod, (named in the topic).
I dont see why is it related with the fact I cannot uncheck the unneeded language like Chinese.
but the language part is not much of an issue like the SD card.
I am not trying to run old Apps, since my SD was formatted during the upgrade,
I am trying to move - or choose where to install current apps, ability I had before this Version.
I have an image to attache, but I cannot since I am a new member.
any reason why other mods for the same phone were working very slow? (Clean installation)
thanks for the quick reply.
The ability to move/force all apps to to SD or pick a default install location is not included in the rom yet. Do it manually with a app if you want to move something to SD that doesn't support being moved there.
albundy2010 said:
The ability to move/force all apps to to SD or pick a default install location is not included in the rom yet. Do it manually with a app if you want to move something to SD that doesn't support being moved there.
Click to expand...
Click to collapse
Just tried it, same thing, Apps cannot move to the SDcard.
I find the "Airplane" icon can't be shown on the top when you choose "text" in Signal status style.
ROM: CM9 v3.4
KERNEL: Matr1x v17.5
Onlyktm said:
Just tried it, same thing, Apps cannot move to the SDcard.
Click to expand...
Click to collapse
How did you try it?
I have not used that particular rom myself but have used kangs and am running a official nightly build of cm9.
albundy2010 said:
How did you try it?
I have not used that particular rom myself but have used kangs and am running a official nightly build of cm9.
Click to expand...
Click to collapse
I have d/l couple of apps that move to usb, they all say apps cannot be moved to the SD, those apps (like facebook) were already on my SD with the old version.
Just because the old version allowed to move them to SD that does not mean the apps support it. Again since the feature to do it within the rom itself is not there yet you have to do it manually with a third party app. Titanium backup or one of the who knows how many root apps2sd apps will move it
albundy2010 said:
Just because the old version allowed to move them to SD that does not mean the apps support it. Again since the feature to do it within the rom itself is not there yet you have to do it manually with a third party app. Titanium backup or one of the who knows how many root apps2sd apps will move it
Click to expand...
Click to collapse
Got it, thanks.
another thing, when unlocking the device I have two options.
one is to unlock, and the other one is the camera.
Q: 1. can i switch the camera with something else?
2. I have seen roms with 4 -5 -6 different options to unlock, how can I have this feature?
thanks again.
That is a feature built into that rom. Cyan doesn't have it yet. Not sure what options they are planning to add to lock screen . Just a place holder for now in settings. There are lock screen replacements on the market you could install if you like.
Try CNA or the more stable CM7.2
CM9 made by Kalim doesn't have these features right now. You could try a different ROM called "Codename Android" (CNA) which is based on ICS.
However, all these ROMs are not in their final stage. A better choice to try would be the CyanogenMod 7.2 for NS. I was using it while I was on GB, works wonders, although expect BSOD some times...
Enjoy the testing!
Onlyktm said:
Got it, thanks.
another thing, when unlocking the device I have two options.
one is to unlock, and the other one is the camera.
Q: 1. can i switch the camera with something else?
2. I have seen roms with 4 -5 -6 different options to unlock, how can I have this feature?
thanks again.
Click to expand...
Click to collapse