Related
Scroll to the bottom for a fix to the newest clockwork recovery flasher...
UPDATING TO DI07
First things first, you must update to the latest firmware and kernel, but in order to do this you must un-root and return to the stock kernel in order to avoid problems.
Simply download the zip here, and run the run.bat inside, after extracting the folder to your desktop.
You must have debugging mode enabled for this to work.
Once that's finished you can update to DI07 using the stock recovery. You do this, like any other update, by renaming the zip (found here, to update.zip on throwing it onto the root of your sdcard.
Then, boot up into the stock recovery (power+camera+volume down) and press home to apply the update.zip.
The update will install and your phone will reboot into DI07.
First boot will take some time, so be patient.
Now onto the fun part, rooting your phone.
OBTAINING ROOT
Just as you obtained root before DI07, you obtain root on DI07, if you have the right tools. Download the one click root here, and once more extract the included folder to you desktop, make sure you have usb debugging enabled, and run the run.bat. Your phone will reboot, and you will have root.
FLASHING CUSTOM RECOVERY
Here is where it gets a tad bit more complicated. First off, you have to download the zip here, but this time before running the bat you have to open up command prompt and redirect it to your C:/android-sdk-windows/tools folder and then run the following code.
adb devices
adb shell
su
remount rw
exit
exit
Now the command prompt should close, and you can run the run.bat for build 31 of clockwork recovery flasher. Once more, your phone will reboot and after the script is done running and says "press any key to exit...." you can press enter and boot into recovery.
That's it, three simple steps to updating, obtaining root, and flashing clockwork recovery!
Also, don't forget to check out my ROM coming later today, as well as noobnl's Andromeda Galaxy ROM v1, just released.
great tutorial...and i can use these instructions even if i am using aridons v4 rom and heros overclocked kernel?
Well, it basically reverts you back to the stock kernal, so you will for sure lose the overclocked kernal. However, I'm not sure about the ROM. Your best bet would be either to hold off on this as the ROM you are suing isn't based on DI07, or flash to stock and then follow this guide. Your choice.
bubby323 said:
Well, it basically reverts you back to the stock kernal, so you will for sure lose the overclocked kernal. However, I'm not sure about the ROM. Your best bet would be either to hold off on this as the ROM you are suing isn't based on DI07, or flash to stock and then follow this guide. Your choice.
Click to expand...
Click to collapse
Well I just ran this and at first glance, it got me right into clockwork. I selected one of my nandroid and restored it. After the phone finished restoring and everything, I wanted to make sure that I still had clockwork but instead it was stock recovery once more.
Since I still had root, I redid the steps starting with entering the commands, then I re-ran the bat file for clockwork. I checked and clockwork is back...unknown as to how long though.
Thank you!!! the remount rw was what I needed to get the clockwork custom recovery to flash!!!
I have another question for you? Is it possible to install the custom recovery without having root? I suspect not? The reason I ask is that I would like to have a nandroid backup of the completely stock rom although I guess I could use the one noobnl has posted
well, i got back to a stock rom....applied the stock kernal...but when i went to apply the update.zip...it took me back to clockwork...not the stock recovery....so i tried to apply the update from there but it aborted...how do i get rid of clockwork so i can go into stock recovery and will that fix it?
mrkrabs said:
well, i got back to a stock rom....applied the stock kernal...but when i went to apply the update.zip...it took me back to clockwork...not the stock recovery....so i tried to apply the update from there but it aborted...how do i get rid of clockwork so i can go into stock recovery and will that fix it?
Click to expand...
Click to collapse
Three options I can think of- if you use adb reboot recovery I believe it will load the stock recovery- the other option is to use odin to go back to complete stock. Finally you could use the option for clockwork in this thread look for the link under "B]Update.zip (for clockwork recovery and includes all the listed apps below)"
EDIT: I can confirm that "adb reboot recovery" loads the stock recovery when you have clockwork
bubby323 said:
FLASHING CUSTOM RECOVERY
Here is where it gets a tad bit more complicated. First off, you have to download the zip --- but this time before running the bat you have to open up command prompt and redirect it to your C:/android-sdk-windows/tools folder and then run the following code.
adb devices
adb shell
su
remount rw
exit
exit
Now the command prompt should close, and you can run the run.bat for build 31 of clockwork recovery flasher. Once more, your phone will reboot and after the script is done running and says "press any key to exit...." you can press enter and boot into recovery.
Click to expand...
Click to collapse
Im having a little issue with this. Im running windows 7. Can I do this in windows 7? Also when it says redirect it to your C:/Android---- do I have to change the drive to ex. cd c:/ first or do i just type in the command prompt C:/android-sdk-windows/tools and hit enter and follow the rest of the commands? Sorry extreme noob here..
Thank you for any help!!
I have ClockworkMod Recovery installed, how can I get into the stock recovery to apply this?
Look 2 posts up
Sent from my SPH-D700 using XDA APP
You need to use the DG27 uninstaller instead of the DI07 uninstaller to update to DI07.
The DI07 uninstaller is just to go back to stock DI07 kernel if you already updated
DG27 uninstaller: http://www.sdx-downloads.com/devs/noobnl/one.click.stock.&.root.uninstallerv1.0.1.zip
I think it needs to be pointed out that this alone won't work if you are like me and have removed apps from the phone. All those apps must be restored in addition to reverting to stock kernel before the OTA update can be applied. At least that's how I understand it. Feel free to correct me if I'm wrong.
Thanks a lot, I appreciate step-by-step tutorials like this for noobs like myself ... this made things a lot easier since some of the stuff (files, instructions, etc.) was all over the place.
would seem that way because I removed the alarmclock to start and when i try to run update.zip from sd it fails when checking current system @ /system/app/AlarmClock.odex
i tried rerooting and reinstalling alarm clock using the backup from titanium. says it is successful but i do not find it in my apps drawer. it still fails there too..
WisdomWolf said:
I think it needs to be pointed out that this alone won't work if you are like me and have removed apps from the phone. All those apps must be restored in addition to reverting to stock kernel before the OTA update can be applied. At least that's how I understand it. Feel free to correct me if I'm wrong.
Click to expand...
Click to collapse
Titanium backup does not restore apps in /system. You have to restore those by hand.
Im officially struggling, undid the root then copy/paste the update to the sdcard, renamed it. It unzips but says its failed to open /sdcard/update.zip(no such file or directory)...suggestions?
I know that in the step it said to copy it to the root on the sd but im am very green to this stuff, and didnt see a folder marked that, therefore I just copied it to the sd card
I can't get Clockwork to flash now. I walked through the steps...I did the remount crap and ran the bat and it rebooted the phone but when i reboot into recovery it goes to the normal recovery screen. Now if I try to redo it it does not recognize the remount rw and i can't get anywhere with it and i'm stuck with no clockwork.
but this time before running the bat you have to open up command prompt and redirect it to your C:/android-sdk-windows/tools folder and then run the following code.
adb devices
adb shell
su
remount rw
exit
exit
Click to expand...
Click to collapse
This part is unnecessary because the recovery zip comes with adb built in
is there a manual way to push this to the phone? These one clicks never seem to work for me ever it's just easier to do it myself.
Whosdaman said:
This part is unnecessary because the recovery zip comes with adb built in
Click to expand...
Click to collapse
No you must do this in order to get clockwork.
Hello,
I am stuck with rooting process. I tried rooting, unrooting before but this time, for some odd reason. I am unable to proceed
I followed this procedure from unlockr website to root the nexus S. Could not post the exact link because of restrictions
Phone is unlocked , USB debugging is ON. ADB mode is working, I can use other commands. But its giving me the following error on step 6 . Line 3
Mount : Operation Not permitted
Attaching image !
When I boot using volume up & Power button and go to Recovery, It gives me exclamation mark & Android Sign... So I cant unroot it either.
I always tried to unroot so I can go back to original state and restart the process. If I flash through recovery.img I can go into recovery but after few steps, I am stuck
Yeah that's normal. The mount command requires root permission (which you don't have yet)
Generally what you have to do after flashing the (right version of) custom recovery is:
copy the su.zip to your SD card
reboot into custom recovery
choose apply zip from SD card and select the su.zip
reboot
That's it.
Su have already been installed in previous step. Infact, I can even see its icon in menu...
Then it sounds like your recovery reverted back to stock. Did you rename the .sh file that rewrites the recovery on reboot? If not, do that using root explorer or any other method you find in the guide. Then flash the recovery again and it will stick.
Sent from my Nexus S using Tapatalk
No I didnot renamed. I was just following the process. I tried to unroot but cant do it either. I am stuck
ahaseeb said:
Su have already been installed in previous step. Infact, I can even see its icon in menu...
Click to expand...
Click to collapse
If su is installed correctly then for the "Mount : Operation Not permitted" problem, you just have to type su in adb shell (there may be a Superuser permission popup on the phone, just allow it) -- the prompt should change from $ to #, which means you are now root. After that the mount command should work.
To make custom recovery stick on every boot, rename /system/etc/install-recovery.sh to other name e.g. install-recovery.sh.disabled
When I typed su it said Permission denied !
Just because you have superuser in your app drawer does not mean you're rooted. You can downloaded from the market on any phone/rom.
You are not rooted.
Flash custom recovery via fastboot
Boot directly into recovery etc.
ahaseeb said:
When I typed su it said Permission denied !
Click to expand...
Click to collapse
Then I suggest you re-install Superuser from Android Market. Normally it shouldn't just say permission denied, there should be a Superuser popup asking for permission.
Or better, try to redo everything following this guide instead.
Again YOU HAVE TO FLASH SU FROM CUSTOM RECOVERY.
Do not install from market. Hell don't even boot up the OS. Flash recovery. Boot directly into recovery and flash su.zip from your phones internal storage/sdcsrd in recovery. The you're rooted.
Now you can update delete/rename the script to make the custom recovery stick. Update su in market or whatever else you want to do.
.
I believe i got it fixed. When ever the phone used to boot after installation of SU, dialogue box to ask for unlock. That dialogue box disappear very quickly. It took me time to figure it out. Thanks, I guess I am good now.
Thanks every one
Hi all,
I have been through douzens of threads and forums looking for a solution to this.
I followed some instructions to modify the build.prop file on my Huawei G535-L11 to disable Huawei theme manager in order to get Xsposed working fully (changed ro.config.hwtheme: 0). I did a backup of my original build.prop before hand, and my phone was rooted and unlocked but running the stock rom.
Unfortunately, it rebooted but won't go past the first 'EE' splash screen (just turns off again).
I can inconsistently get in to both fastboot and Android recovery, so I have been trying to use adb to push the original build.prop to /system/ on the phone.
However, this fails as /system/ is apparently RO. I have now discovered that I can't get SU permissions despite my phone being rooted.
If I try:
adb shell
$ su
nothing happens and it goes back to a $ prompt.
If I try:
adb root
I get the message (paraphrased):
adb cannot run as root in production builds.
So I can't push or do any adb method of restoring the build.prop file?! I don't understand why it is acting as if it is not rooted. I had Link2sd, Gravity Box, No Frills Cpu Controller all set up and working before, so I'm fairly sure I did truly have root.
I have also tried flashing a TWRP recovery, which apparently is successful, but when I go in to recovery it is still the Android Recovery.
Does anyone have any ideas what I could do to get my phone working again please?! This is my last gasp before the phone gets filed under 'B' in the cylindrical cabinet in the corner of the room! :crying:
Any assistance greatly appreciated!
Bumpty bump?
So what ro.debuggable should be 0 with ro.secure
It looks to me like the best phone $80 can buy I spent couple hours trying to figure out how to enable Multi User module.
My understanding is that adding this to /system/build.prop would bring users module back:
fw.max_users=3
fw.show_multiuserui=1
None of the commonly used apps can root this phone.
Without root I cannot remount /system to read-write to edit build.prop
Stock recovery can mount /system
There are options in recovery to run update from sd card or to update via adb sideload but the phone does not show in adb devices while in recovery. There is also fastboot option.
I also tried dirty cow exploit but it fails with "only position independent executables (PIE) are supported"
I am into this for only couple hours, so I know I am missing a lot. Any pointers that could get me closer to enabling Users module would be welcome.
So, after some reading, i figured I should be able to apply update form recovery that will replace build.prop with modified one. For start, to test things out, I just want to copy file from update.zip to /system/build.prop.test
I created update.zip with update-script and the file I want to add to /system.
Here is update.zip: www . filedropper.com /update_10
I signed update.zip using this:
www . learn2crack.com /2014/02/sign-android-apk-zip.html
I get error "Signature verification failed". Is the problem that keys are test keys or that they are outdated? Is some special manufacturer key required to sign updates?
I am not looking for someone to do this, I just need to be pointed in the right direction.
I have multiple users now :
- downloaded TWRP from bluroms.info
- connected the phone, enabled USB debugging and OEM unlocking in developer options
- run "adb reboot bootloader"
- after phone booted in fastboot mode
fastboot oem unlock (followed instructions on screen / all data wiped)
fastboot boot blutwrp.img (downloaded TWRP)
- twrp started...
- mounted /system
adb pull /system/build.prop
- edited build.prop
adb push build.prop /system/build.prop
adb reboot
- phone got stuck on logo after reboot
removed battery and started the phone again and all seems good
@sasha_ Hey I know this isn't about how to root but could you tell me exactly how you managed to root your Blu Advance 5.0 HD? PM me.
mrfunnybone said:
@sasha_ Hey I know this isn't about how to root but could you tell me exactly how you managed to root your Blu Advance 5.0 HD? PM me.
Click to expand...
Click to collapse
If by rooting you mean, installing supersu so that apps can request root access, i did not do that, because i do not need it. There must be some tutorial around about installing supersu once you root access to the /system - and the steps I described can you get there.
sasha_ said:
If by rooting you mean, installing supersu so that apps can request root access, i did not do that, because i do not need it. There must be some tutorial around about installing supersu once you root access to the /system - and the steps I described can you get there.
Click to expand...
Click to collapse
So is getting root access to system like booting recovery TWRP? then pressing the Mount button and checking System? Sorry I'm a newb at this.
I'd love to gain root on this phone I have twrp installed but can't seem to find a root method that works
Just in case you guys are still watching this, I posted my experience with this phone here
https://forum.xda-developers.com/showpost.php?p=75164672&postcount=26
Guys I need some help !!
I have official firmware in my phone S7 edge ( Android 7.0 G935F ) but once i tried to root it and it was stuck in boot logo so i went to a store for a suppose unroot ,but know e cant use Samsung health app because gives me an error. I already searched this error and just have to change the tima value to 0 in build.prop
My real question is can I edit build.prop to fix this error without root or do i have to root my device again to fix this error ??
Please help
thanksssss, waiting 4 answers
Your phone KNOX is ticked 0X1 that's why not working, you must root your phone and edit built prob, edit line TIMA=0 and will work
so i have to root it again ?? i have some problems (fear) doing it again because i don't know how to do it right
Or othe way to make it work. But need to be Root. Delete v5 restar install v4. Loging abd update. Done
I would recommend you the recovery mode if you don't want root the phone again. You have full access to system files in recovery mode, but only if it is mounted.*
Many stock recoveries don't have option to mount system partition or don't have adb access for commands. You might want a custom recovery for this. And no, you don't need root for custom recovery. So now all you need to do is, boot into recovery (custom preferred), mount system and then using adb, pull the build.prop file:
adb pull /system/build.prop <path to save file>
Now edit the file you just extracted and save it*
Push it back to your phone via adb
adb push <path to your file> /system/build.prop
You're not done yet. You need to set permissions too. So open she'll via terminal
adb shell
Now from shell, set the right permissions
chmod 644 /system/build.prop
And you're done
Reboot your phone and see the changes