Database Info

[Q] Problem rooting/not a noob....ideas???

I tried using revolutionary to root the phone and its worked for my phone and about 4 others ive done. but this peticular phone i came across it will read it, give me a code but tell me that i inputted the.wrong code and close. i did this a few times same.result. so i went to htc.com and unlocked the bootloader and i when i try to install the custom recovery the rough the bootllader it tells me.the phone is not recognized after it picks up the file and opens it. what the #$%$# is going on? lol

Chances are you've made a typo somewhere with Revo, and with unlocking via HTC you have to manually flash CWM to be able to flash a ROM

i tried like ten times and it keeps telling me key is incorrect.
i feel doing it manuelly is the only way to go. since the bootloader is unlocked i downloaded the recovery and saved it to the root. i turned on the phone to the bootllader, it reads it, and it says device not recognized. is their a .img file i can use instead? and what are the adb commands so i can flash it that way?

There are threads covering adb on here, and just Googling it will give you what you want to know as well.
What version of Revolution are you using? Could be an older one which has a different beta key than the current v0.4

adb way is manually
make sure you have sdk and adb/fastboot set up in your environment, its lot faster that way
once you have that, put the phone in fastboot
and type
fastboot flash recovery (drag the recovery.img in command window) and press enter and it will flash new recovery

HHHHHHHHEEEEEECCCCCKKK YYYYEEEESSSS!!!!
Thanks bro!!!!
I put the reocevery into c:/android
Ran cmd
fastboot flash recovery recovery.img
perfect
thx again!!!

Welcome and happy Rom flashing

[email protected] said:
i tried like ten times and it keeps telling me key is incorrect.
i feel doing it manuelly is the only way to go. since the bootloader is unlocked i downloaded the recovery and saved it to the root. i turned on the phone to the bootllader, it reads it, and it says device not recognized. is their a .img file i can use instead? and what are the adb commands so i can flash it that way?
Click to expand...
Click to collapse
Copy/paste the key to notepad then copy/paste from notepad to revolutionary then it will work.

[Q] Stuck on Google logo. Unable to push image file to phone... Please help.

Tried various possible solutions and still can't get past the Google logo. Installed adb and Samsung driver but when executing commands such as "abd remount" or "adb push file.zip \sdcard\" in cmd I get an error saying "device not found".
Does anyone know how I could resolve this issue?
I tried clearing the cache and wiping the data from the phone, and even heating the phone with a hair dryer. I'd very much appreciate any help.

looks like you still be able to get in reovery ? if so , then nothing you should worry , just flash a new ROM

Do you mean like a boot image or a recovery image?
If so then you need to put phone in fastboot mode, hold volume up and power til it comes up on screen, then on command prompt on your computer type in fastboot flash recovery xxxxxxx.img (xxxxx is the name of the file like cwm5.0.2.0.img or whatever)
That should give you a working recovery to flash roms from.
Is your boot loader unlocked?
If you wanna mount then just go to mounts and storage and mount USB storage and it will show up on your computer!

nodstuff said:
Do you mean like a boot image or a recovery image?
If so then you need to put phone in fastboot mode, hold volume up and power til it comes up on screen, then on command prompt on your computer type in fastboot flash recovery xxxxxxx.img (xxxxx is the name of the file like cwm5.0.2.0.img or whatever)
That should give you a working recovery to flash roms from.
Is your boot loader unlocked?
If you wanna mount then just go to mounts and storage and mount USB storage and it will show up on your computer!
Click to expand...
Click to collapse
Thanks for your reply, seems to be hanging on waiting for device. Fastboot appears to be locked and it just hangs on "waiting for device" when I enter the command fastboot oem unlock... Not sure where to go from here.

leeroy88 said:
Thanks for your reply, seems to be hanging on waiting for device. Fastboot appears to be locked and it just hangs on "waiting for device" when I enter the command fastboot oem unlock... Not sure where to go from here.
Click to expand...
Click to collapse
It was a recovery image file by the way. Tried fastboot flash recovery xxxxx.img like you had said but same problem...

leeroy88 said:
It was a recovery image file by the way. Tried fastboot flash recovery xxxxx.img like you had said but same problem...
Click to expand...
Click to collapse
Hmmm try going to cmd prompt and typing in adb devices, if you get nothing then your adb isn't set up properly and you need to go into setting and change the path on your computer.
I know the details are sketchy but gimme a min and I will find you a link
---------- Post added at 03:05 AM ---------- Previous post was at 03:00 AM ----------
http://forum.xda-developers.com/showthread.php?t=1161776
Find the Android sdk folder in your computer, move it to the root of C.
I don't think adb is where this guide says it is, there is a read me in the folder where it was saying it has moved to the platform tools folder.
So anyway find the path to the file and put it where the guide says and you should be on the ball.

Forget adb. You need to use fastboot.
Open a command prompt in the directory with fastboot or cd into it.
Put phone in fastboot mode.
On the command prompt type fastboot devices.
You will see your serial number. If you don't recheck and make sure you did everything. Sdk PDA drivers if need be etc.
Fastboot flash recovery custom recovery img name.img
Boot into recovery
Mounts and storage.
Mount SD card
Put a rom for you device on there.
Unmount
Wipe everything but sdcard from recovery.
Flash the rom by going to install zip from SD card......

Okay still stuck trying to connect to my phone. I haven't been able to get my serial number show when typing fastboot devices in cmd. adb is set up and seems to be working but the list of devices is blank when I type in adb devices. The phone was put into fastboot mode both times. I get <waiting for device> when I try
fastboot flash recovery clockwork-5.0.2-crespo.img
I think the bootloader may be locked as it does say LOCKED under lock state, which is probably the reason why I can't get the recovery image to work. I couldn't install PDANet as it wanted to connect to my phone while in debugging mode at the end of the installation. Would it be possible that fastboot oem unlock won't work with without having PDANet installed? I'd really appreciate any further help on this topic.

You need the drivers.

albundy2010 said:
You need the drivers.
Click to expand...
Click to collapse
I have the Google USB driver package installed from SDK Manager. I had tried to install some other Samsung driver found on another post but it wouldn't install.

Turns out drivers weren't fully installed, managed to get PDANet installed and could connect to the phone with fastboot devices. Serial number was displayed in cmd. Only problems lies with unlocking the bootloader. fastboot oem unlock fails giving an error: too many links. Anyone have a solution to this?

leeroy88 said:
Turns out drivers weren't fully installed, managed to get PDANet installed and could connect to the phone with fastboot devices. Serial number was displayed in cmd. Only problems lies with unlocking the bootloader. fastboot oem unlock fails giving an error: too many links. Anyone have a solution to this?
Click to expand...
Click to collapse
Did you try booting into bootloader in the first place? Volume up+Power
Then you can use fastboot. Forget PDAnet. Just install SDK and ADB
Use this:
http://forum.xda-developers.com/showthread.php?t=1007782

ismailham said:
Did you try booting into bootloader in the first place? Volume up+Power
Then you can use fastboot. Forget PDAnet. Just install SDK and ADB
Use this:
http://forum.xda-developers.com/showthread.php?t=1007782
Click to expand...
Click to collapse
Yeah I was in bootloader at the time, but I noticed that the Lock-State said locked. So I figured I must first use fastboot oem unlock. If I was to try flash with a stock recovery image would I still need to unlock the bootloader? Like I said I was able to use fastboot devices and get my phones serial number to show up, so I think SDK and ADB is properly installed, path set correctly etc.

leeroy88 said:
Yeah I was in bootloader at the time, but I noticed that the Lock-State said locked. So I figured I must first use fastboot oem unlock. If I was to try flash with a stock recovery image would I still need to unlock the bootloader? Like I said I was able to use fastboot devices and get my phones serial number to show up, so I think SDK and ADB is properly installed, path set correctly etc.
Click to expand...
Click to collapse
I don't think you need to unlock the boot loader to flash a recovery image.
I may be wrong but I remember someone saying that once. I had mine unlocked before I had the chance to try it out. What happens when you type in fastboot oem unlock?

nodstuff said:
I don't think you need to unlock the boot loader to flash a recovery image.
I may be wrong but I remember someone saying that once. I had mine unlocked before I had the chance to try it out. What happens when you type in fastboot oem unlock?
Click to expand...
Click to collapse
After typing fastboot oem unlock I get three dots ...
Pretty much straight away it fails and says something about "too many links".

Did you do all the steps from here http://nexusshacks.com/nexus-s-root/how-to-root-nexus-s-or-nexus-s-4g-on-ics-or-gingerbread/ ?

kvaju said:
Did you do all the steps from here http://nexusshacks.com/nexus-s-root/how-to-root-nexus-s-or-nexus-s-4g-on-ics-or-gingerbread/ ?
Click to expand...
Click to collapse
Thanks for your reply, I followed the steps just now and got the exact same error. Before I was trying fastboot oem unlock while in platform-tools but this time I had downloaded the nexussrootICS.zip file, and extracted it to the root of C. I tried fastboot devices and my serial shows up and after fastboot oem unlock I get "status read failed: too many links."
The only difference I seem to have is that in my device manager I have Android Device > ADB Interface, as opposed to SAMSUNG Android Device > ADB Interface.
Not a big difference but that's all I can think of.

the same issue for me. is there any working solution for that?

I recently had success in recovering from this issue.
Here is the link, read the last comment
http://forum.xda-developers.com/showthread.php?t=1894147

GnubbyaBush said:
I recently had success in recovering from this issue.
Here is the link, read the last comment
http://forum.xda-developers.com/showthread.php?t=1894147
Click to expand...
Click to collapse
Thanks! I'll try to do this fancy dancing

Half bricked Xoom, deleted everything - help appreciated

Hello,
again i need help I have unlocked the bootloader on my Xoom, the i have flashed TWRP and downloaded a Rom and the Gapps. I copied the gapps onto the device and followed instructions which came with the rom. I was instructed to wipe "system" too which i did.
Of course that deleted the downloaded rom and gapps too. Now i have TWRP and was excited to mount USB storage and just copy over again the rom and gapps but unfortunately there is no mount as USB option.
What and how is the smartest way to go about it? I wanted to sideload over ADB but the device is not found. I have really tried everythin in my knowledge, hope someone can help
cheers

Come on guys, really need help here. My kids are killing me for the damn thing

I have same problem.......it's an issue of twrp !

Have you tried a micro sd card? (copy the rom and gapps there from a pc then put it in the Xoom, etc...)
Worst case, you should be able to grab the stock images http://forum.xda-developers.com/wiki/Motorola_Xoom and fastboot flash the device back to stock.

Have the same problem
dosada, could you solve the problem?
airesch, I tried to mount sd card but it is impossible. How can I return to stock without ADB because computer is not recognized?

hbtwender said:
dosada, could you solve the problem?
airesch, I tried to mount sd card but it is impossible. How can I return to stock without ADB because computer is not recognized?
Click to expand...
Click to collapse
Stock flash doesnt require adb, just fastboot mode. You may need to still install a driver, but if you can boot into recovery then the xoom should also be able to boot into fastboot mode and be recognized by a pc. If the instructions on the link I gave arent enough, I will see if I cant find something tomorrow when I am on a pc.
Sent from my GT-N8013 using XDA Premium 4 mobile app

hbtwender said:
dosada, could you solve the problem?
airesch, I tried to mount sd card but it is impossible. How can I return to stock without ADB because computer is not recognized?
Click to expand...
Click to collapse
NOTE: This WILL erase everything remaining on the device. In the case of the above, I don't know that you have much choice, just be forewarned.
Lord AIO toolkit has all the tools you need (look at the second post if you need the Windows driver.) Extract both the stock image zip and the toolkit (unless you have the sdk, in which case as long as you can find fastboot.exe you should be fine,) to somewhere convenient. Install the windows driver if you never have before and reboot your pc.
1. Boot your Xoom in fastboot mode: Power+Vol+ until it says: Starting Fastboot protocol support (you may need to tap the Vol+ instead of holding it the whole time, my Xoom has always been a bit picky about the buttons.)
2. Connect the usb to the pc
3. In a Command prompt window, go into the extracted version of the toolkit above (or if you have the sdk, just go to where you have fastboot.exe from it)
4. Run the following commands (replacing the files at the end with the full extract path from your stock image zip extract)
fastboot flash boot boot.img
fastboot flash system system.img
fastboot flash recovery recovery.img
fastboot flash userdata userdata.img
fastboot erase cache
"fastboot reboot" if you want to stay unlocked or "fastboot oem lock" if you want to re-lock and follow the prompts. The Xoom will get OTA updates even if it's unlocked, so there should be no reason to re-lock unless you need to send it in for service.
The driver isn't what I used to use, but it *should* work, and the instructions should be correct as far as I can remember. As long as you don't flash the wrong image to the wrong place/run out of power during flashing/disconnect during a flash then none of this should permanently damage the hardware and should get you a working device again. It's just that it's been so long since I have personally done any of this that I have forgotten more than I ever knew .

Solved
airesch said:
NOTE: This WILL erase everything remaining on the device. In the case of the above, I don't know that you have much choice, just be forewarned.
Lord AIO toolkit has all the tools you need (look at the second post if you need the Windows driver.) Extract both the stock image zip and the toolkit (unless you have the sdk, in which case as long as you can find fastboot.exe you should be fine,) to somewhere convenient. Install the windows driver if you never have before and reboot your pc.
1. Boot your Xoom in fastboot mode: Power+Vol+ until it says: Starting Fastboot protocol support (you may need to tap the Vol+ instead of holding it the whole time, my Xoom has always been a bit picky about the buttons.)
2. Connect the usb to the pc
3. In a Command prompt window, go into the extracted version of the toolkit above (or if you have the sdk, just go to where you have fastboot.exe from it)
4. Run the following commands (replacing the files at the end with the full extract path from your stock image zip extract)
fastboot flash boot boot.img
fastboot flash system system.img
fastboot flash recovery recovery.img
fastboot flash userdata userdata.img
fastboot erase cache
"fastboot reboot" if you want to stay unlocked or "fastboot oem lock" if you want to re-lock and follow the prompts. The Xoom will get OTA updates even if it's unlocked, so there should be no reason to re-lock unless you need to send it in for service.
The driver isn't what I used to use, but it *should* work, and the instructions should be correct as far as I can remember. As long as you don't flash the wrong image to the wrong place/run out of power during flashing/disconnect during a flash then none of this should permanently damage the hardware and should get you a working device again. It's just that it's been so long since I have personally done any of this that I have forgotten more than I ever knew .
Click to expand...
Click to collapse
Hey airesch, thank you for your support. I couldn´t follow yours suggestion because my xoom was not recognizing the PC or MAC. However I discovered that my sdcard was broken. When I´ve tried a new one with ZIP files inside it works perfectcly and I could return to my old room doing flah in the recovery mode of TWRP2.2.
It is important to note that my Xoom did not find .IMG files inside the card but only ZIP ones. Any way it worked perfectly and I hope this solution will serve to other in solving his/her problems.
Many thanks

Well, that works too, and that was closer to what I originally suggested (tho I didn't expect you had a bad sd card.)
And yes, recoveries generally don't support IMG files directly, you need to have a specially crafted zip to flash those in. IMG files directly are for fastboot/pc tool flashing.
Congrats on fixing it.

HTC ONE S forgot to s off

hey guys i have a question.. i made a total n00b mistake and now i am not sure what to do..
I have a htc one s
-i rooted the phone and put twrp 2.8 the newest one then i tried to load a custom rom.. i read somewhere on line that you did not need s off to do this so i tried and now everytime the phone boots it loads the htc screen but goes to a black screen which is kind of dim .. anyway my bootloader is unlocked its version 2.15 and i can get back in to my recovery and mount it i tried several roms but none work.. i was wondering if someone here has a stock rom or something that can get my phone to boot in to a os.. i have tried using fastboot to try and s off but everywhere i read it says u need debugging on my drivers are installed correctly but when u do adb devices it shows empty space.. ive tried many drivers even the google generic i cannot get it to work for the life of me... any help will be appriciated
cheers
Sam

Well let's take it easy. There were some things you've missed when reading so that's why you run into problems.
First thing you missed is that YOU MUST FLASH THE KERNEL IN FASTBOOT if you're S-On. That is EVERYTIME you flash a ROM.
Second, when you're in fastboot, you won't have "ADB devices" command working, you'll have to use "fastboot devices" command instead, ADB does not work while in fastboot.
What you'll have to do is like this:
1. Take any ROM you'd like to flash, place it on your sdcard (while you're in recovery you can mount sdcard to be accessible from pc)
2. Extract from the rom and save it on your pc (in the same folder where adb/fastboot commands are, usually /android-sdk/platform-tools) the "boot.img" file that's in the root of the ROM zip. That'll be called generic "the kernel".
3. Flash the ROM in recovery
4. Reboot to bootloader then while still connected to pc via USB, select fastboot mode. On your screen the "fastboot USB" will be shown.
5. Check if fastboot drivers are installed and fastboot commands are working by issuing "fastboot devices" command. If it'll not return your device then check if drivers are installed properly and you are not using an USB 3.0 port on windows 8.1 (were reported some issues with this configuration).
6. Having fastboot working, open command prompt in the location where fastboot is (and where you have saved the boot.img file) and issue the command: "fastboot flash boot boot.img"
7. Reboot
Now your new ROM should boot and work. Pay attention to choose the right ROM for your hboot and don't forget to do these steps EVERYTIME you're flashing a ROM.
If you're still looking for a stock ROM to flash, there's a thread with all RUUs linked, choose the one for your carrier or model type and run that one but I guess you won't need that
Good luck
Sent from nowhere over the air...

Flashed stock recovery and thought I soft bricked my shield tablet.

First I'll give credit where it is due. From two threads on this site is where I got help with this issue:
I followed THIS guys steps for manually erasing and got the recovery images and lots of other useful information from HERE. Thank you guys very much!
OK, so, hopefully I can help someone with my little story as well. I was having issues with apps and programs crashing on me with lollipop and the new marshmallow update. The tablet just wasn't working properly and moving slow. I even had the SD card holding all my apps and larger files so I didn't overload the internal storage. So, I decided I wanted to flash back to factory/stock recovery and go from there. I did this using THIS method. I flashed via the "flash-all.bat" file (the command in fastboot is the same as the file name). I should note that there was one instance that failed during the install (I did try it again and got the same failure). Said something about “did you mean you wanted to flash this partition” or something, then showed it failed. After flashing I hit continue on the bootloader screen of the tablet and it said it was "cold booting." After about 5 minutes or so it started to boot but never made it past the NVidia screen. I tried wiping the phone with factory reset, wiping the cache, etc. and then re-flashing the recovery (again with the .bat file). I tried flashing TWRP but it didn't install apparently, because it still went to factory recovery. I even re-locked and then unlocked my bootloader to see if that would set everything straight. Nothing seemed to work. I knew I would eventually find a solution though so I kept looking. Stumbled on some other people that had the same issues but no solution (hope those people got it figured out). So here's what I did after some more research:
First, if you're in this situation and you did factory reset to try and resolve the problem, you may feel like you can no longer communicate with the device via fastboot/adb, but as long as you have the usb drive and your SDK tools installed (I used CodeWorks for Android all-in-one program) that shouldn't be a problem. You'll just have to be in the bootloader on the tablet.
-If for some reason you deleted or uninstalled your drivers and tools you'll have to download them again and then, the computer should still be able to communicate with the tablet. In the device manager under portable devices it will still show up as Module something or other. So the computer still sees the device but doesn't fully recognize it yet. Don't worry, this should still work! Just make sure you that fastboot is seeing the device by inputting "fastboot devices" in the command window and a 14 digit serial number should pop up. If it just says "list of devices" or there's nothing then you wont be communicating with the tablet.
Your device should be connected to your computer and started in bootloader mode. On your computer you should have the command prompt for adb/fastboot open. I just go to the folder where the .exe files are located and hold shift and right click in the white space of the folder, then select "open command window here."
From here follow the erase steps: stolen from manigault! :highfive:
fastboot erase system
fastboot erase userdata
fastboot erase boot
fastboot erase recovery
fastboot erase cache
Then flash your recovery MANUALLY:
fastboot flash recovery {dir}/recovery.img
fastboot flash boot {dir}/boot.img
fastboot flash system {dir}/system.img
fastboot flash userdata {dir}/userdata.img
fastboot flash staging {dir}/blob
fastboot flash dtb {dir}/tegra124-tn8-p1761-1270-a04-e-battery.dtb
You can download whatever recovery version you wish. I downloaded 2.2.2 because that's what my device came with out of the box on Christmas 2014. It will more then likely be a .zip file. To make this whole process a little easier simply extract the files in the .zip file where the adb.exe and fastboot.exe files are located (folder should be named platform-tools) and you can completely eliminate typing the whole directory before the file name. ***After your done flashing everything you can go back and delete those files if you want. Just double check that you're deleting the right files by looking at the original zip file. Not sure if it makes a difference but I deleted them anyway.
For example the commands in fastboot will look like this exactly :
(after extracting recovery files into platform-tools folder)
fastboot flash recovery recovery.img
fastboot flash boot boot.img
fastboot flash system system.img
fastboot flash userdata userdata.img
fastboot flash staging blob
fastboot flash dtb tegra124-tn8-p1761-1270-a04-e-battery.dtb
Note: Do NOT use the flash-all.bat command as this doesn't seem to work for this situation. Do it manually like shown above. And let each individual process complete before attempting to input another command.
After this step I didn't select continue on the bootloader. You can either select reboot or simply input "fastboot reboot" into the command window. It may take about 5 minutes to start installing everything but just be patient, it should start. Sometimes with these things you have to do things twice before it works. If for some reason it doesn't work the first time then start from the beginning and try it again. It took two times for me, but that's because I installed system.img twice and was getting double screen. Newb error... and I was a bit inebriated last night when I did this.
Hope this helps someone!
Thanks again to manigault and MidgetMob!
NVIDIA download files HERE!

i think i done the same thing
but the problem i now have is i cnt get tablet into fastboot on pc. i can load fastboot on tablet with power and volume down , but the tablet only shows as MTP device in device manager. i have downloaded drivers from nvidia and no matter what i try i cant install them i have been through all instructions but scince it went to mtp device i cant get device showing in adb. The only way i can get device showing in adb on pc ist to select apply update from adb ! but none of these commands listed in your post will work because its in sideload. is there anyway i cn reset , flash custom rom ect bu using commands while device is in adb sideload.
all i get is now send the package you want to apply to the device with "adb sideload <filename>".....
if you could shed any light on this it would be much appreciated , thanks , lester

did you update official android 6.0 before? then, not working stock recovery, stock boot...
If you can enter bootloader mode, download unofficial twrp 3.0.0.0 (here http://forum.xda-developers.com/shield-tablet/development/wip-twrp-2-8-0-1-unofficial-t2877117) and flash it.
i have a working boot.img file on marshmallow if you want.. please reply.

Sorry for the late response! I have no clue how you got into sideload??? Are you talking about through the recovery on your device? You're not able to get adb/ fastboot to recognize the device, right? It doesn't matter how you get the tablet into the bootloader. Whenever you have the phone in the bootloader then you'll use the fastboot command to "talk to" the device; i.e. "fastboot devices" without the quotes. That command should show your device if it shows as an MTP device whenever you open your "device manager" in windows. That's the same exact situation I was in. Download the codeworks from nvidia like I linked above. Hopefully then you should be able to recognize your device through the bootloader. If not DM me and I'll try to help you.

I'm having the exact problem as Lester. Tablet boots into bootloader but won't connect to computer. So I go into recovery mode and nothing works except apply update from adb. Which brings up the side load message that Lester quoted. And bootloader is showing "device=locked". I am attempting to fix this tablet for a friend that messed it up trying to flash a custom rom. Problem is he had no idea what he was doing and I'm not exactly sure what he did. I do however have a lot of experience with rooted android devices and flashing so any help would be GREATLY APPRECIATED!
---------- Post added at 05:59 PM ---------- Previous post was at 05:55 PM ----------
Also, I've already tried flashing stock rom back onto the tablet by applying update from sd card function in the recovery but when I try to do that the tablet for some reason can't mount the sd card.

rom fiend said:
Tablet boots into bootloader but won't connect to computer.
Click to expand...
Click to collapse
If you've got the device in bootloader then you need to use fastboot, not adb. Try the command 'fastboot devices' and see if the device id is listed. If so then grab a factory image, unzip it and use fastboot to flash the .img files using the commands 'fastboot flash system system.img'. Just make sure to match the partition names to the files.

Hello i have similar issue except when i try flash something i get this error ''remote: file write failed''
and i have to reboot into fastboot to get it flashing fully
but even though i managed to flash everything by rebooting when i boot system nothing shows up, i can just see the back light coming on and turning off after a while
Please help