Related
I'm trying to use the Droid Explorer app to browse the file system on my phone without using the command line. However, to fully use the browser, busybox needs to be installed on the phone. I was wondering if anyone else has done this? I understand that the Madaco ROM has this pre-installed, but was wondering if there was a way that install busybox without flashing the ROM. Thanks.
I've heard that busybox can be hard to load (nvr done it myself), that's why I just use a custom ROM to get it. Even though it is not mentioned, busybox is in the latest Fresh ROM as well.
lostnfound53 said:
I'm trying to use the Droid Explorer app to browse the file system on my phone without using the command line. However, to fully use the browser, busybox needs to be installed on the phone. I was wondering if anyone else has done this? I understand that the Madaco ROM has this pre-installed, but was wondering if there was a way that install busybox without flashing the ROM. Thanks.
Click to expand...
Click to collapse
I think I saw it on this forum... or by a google search... but to install busybox, you download it (again, I think I got the binary from this forum) and put it in a folder like /data/busybox (or on MoDaCo it's in /system/xbin) and then you run busybox --install (or something like that) and it creates all the symlinks.
In order to use the functionality, you have to put into your path the folder where busybox is installed (or at least the symlinks). I found it easier to just install MoDaCo's ROM since you get a lot of other cool things like WiFi tether, apps2sd, superuser whitelist, etc.
Please forgive my "or something like that"'s, but I don't have the exact link to reference... I found the answer (like I said, I think on this forum) just by searching.
Thunderbolt: after rooting, I can run root manager, flash thunderbolt cwm, boot into cwm and backup/etc. However, when I try to run TiBackup or Screen Resolution, or even terminal/su - access denied, device not rooted.
Anyone else experiencing this?
EDIT: read in another thread (search was not working when I posted this originally) to go to problems in TiBackup, then update busybox...
Go into rom manager. Download SU and flash it in clockwork. Should fix ya.
Sent from my ADR6400L using XDA Premium App
ethanwinkley said:
Thunderbolt: after rooting, I can run root manager, flash thunderbolt cwm, boot into cwm and backup/etc. However, when I try to run TiBackup or Screen Resolution, or even terminal/su - access denied, device not rooted.
Anyone else experiencing this?
EDIT: read in another thread (search was not working when I posted this originally) to go to problems in TiBackup, then update busybox...
Click to expand...
Click to collapse
You could search market for busybox and install busybox and install busybox 1.18.3 then try
Just click Problems? in the bottom right of Titanium and let it install busybox for you. I was able to do that and restore all my apps.
Seems like you solved it for you, but for future reference for others, if you're having issues with Titanium only, it could be a the busybox problem, but if other root apps give issues (like Root Explorer can't mount /system as r/w), then the issue is with su or SuperUser not being installed properly.
I had to reboot twice after rooting before SuperUser apk got the notification requests to allow Titanium and RE to get su rights. After that, no problems.
In a nutshell, if you're not getting the SuperUser pop-up request on apps the first time you run them, your su isn't working right yet.
Delete please.
This IS working for 4.3+ using xposed module.
http://forum.xda-developers.com/showpost.php?p=49878296&postcount=679
All credit goes to Phantasm4489. I am only adding the the OP so people can find it.
Below can be used for anything below 4.2 but I still think the xposed module above is better.
Standard Disclaimer:
**************************************************************************************************************
I AM NOT RESPONSIBLE FOR YOU BEING FIRED BY CIRCUMVENTING THE POLICY YOUR IT STAFF HAS PUT IN PLACE. I AM NOT RESPONSIBLE FOR BRICKING YOUR PHONE (ALTHOUGH SERIOUSLY DOUBT IT COULD POSSIBLY DO THAT). I AM NOT RESPONSIBLE FOR ANY DAMAGE WHAT SO EVER. THIS IS FOR EDUCATIONAL PURPOSES ONLY!!
**************************************************************************************************************
Click to expand...
Click to collapse
First off:
THANKS to sparky for the 'su' binary I use in my newer scripts.
THANKS to chainfire for the 'su' binary I use in my older scripts.
THANKS to Fallon for helping fine tuning the directions.
This thread is dedicated to using GFE on rooted devices. My intent is to understand root detection schemes for my own personal education. If the information here is beneficial to others, then that is a plus.
I came up with a process that satisfies both GFE and its use on rooted (technically temp unrooted) devices. Basically unrooting and rerooting the phone so that the GFE app functions and I comply with not running GFE on a rooted phone. .
Tested on CM9 and CM10 for the Epic 4 Touch and the Galaxy S3. I've seen success on other ROMS as well. If you run into issues, i'd be happy to help and improve the process.
What GOOD(GFE) detects and what it doesn't care about
Some key notes about what GFE seems to detect:
Detects 'su' anyplace on the phone /system partition (usually located in /system/bin/su or /system/xbin/su).
Detects the superuser apk and supersu apk
Detects if you have su'd in adb or shell while it is running. Close adb and log out of and shells before launch!
If you use a root tool like titanium, reboot before launching good! Titanium will sometimes leave open rooted processes running.
In pre-JB, it could use the READ_LOGS android permission to comb the system logs and find 'root like 'activity'. In JB, that 'security hole' is closed and that permission is locked down by android.
It detects if /system is RW.
The software is setup to never be shutdown. Once its started, it runs no matter what. Preventing it from starting is a good thing IMHO.
Seems that for some unknown reason, if es explorer was run in root mode at any point before running good, it detects root. Even if I manually kill all the back ground processes before unfreezing/launching Good.
Sometimes I get a compliance failed when I was working in ADB prior to running good. Typically if I was in ADB doing root work, i'll reboot the ROM before enabling good.
Turn off 'automatic update' for super user app from market
What GFE does not seem to care about:
busybox
CWM
locked/unlocked bootloaders
Here is how to make root and GFE play as nice as possible. This isn't perfect but it works pretty good. I still get the 'compliance failed' once in a while when i do something dumb. I am lucky in that I can clear data on the GFE app and reuse the prior key or request a new key from our IT system on demand. If you cannot do this easily, then this may be cumbersome. As we further progress this, we should get less and less lockouts.
SCRIPTED PROCESS
Downloads:
Something to run the scripts One of these will do:
- Connectbot or any shell execution program from play store. connectbot has widgets. I use connectbot.... - Script Manager found here: http://db.tt/Vonx78NI . Or playstore.
(required for PRE-JB roms only). Install Permissions Denied from the Market
The latest cwm/twrp flashable zip attached to this OP.
An installation of busybox. Typically comes with CM and lots of other ROMs but just making the point here that it is required.
Setup app and dependencies:
Flash the gfe_workaround_setup zip attached to this OP in CWM. This will create four scripts and a "backdoor" su binary. They are as follows:
/system/xbin/dger
/system/xbin/egdr
/system/xbin/fu. (The sparkysu binary is insecure so be careful out there! Just a disclaimer)
/system/xbin/r_dger
/system/xbin/r_egdr
Install Good Application
If pre-JB (NOT REQUIRED ON JB+), open Permissions Denied and disable the READ_LOGS permission for the Good Application. Immediately after disabling that permission reboot the device from within the Permissions Denied app (in the menu). It must be done from within the application immediately after toggling the permissions to denied.
Optional but recommended: use "autostarts app" (or similar) from market to turn off all autostarting flags for Good app. This is incase you forget to disable root before you reboot and dont want it to start after again after flashing a rom which would restore root..
Use Connectbot or old script manager to execute the enable/disable scripts.
HOW TO Use the scripts and run the Good.
These scripts will basically temp unroot your phone and disable the superuser user whenever you want to run good. It will reverse the operation whenever you want to return root and lockup good.
I typically leave good disabled unless I am using it but that is up to you.
Whenever you want to 'run good'. You will run the script egdr.
Whenever you want to disable good and return root to your phone run dger (prior to reboot for example or flashing roms or whatever)
DO NOT FORGET TO run the DGER script before flashing a rom since that rom will repush superuser and su and if good was enabled when you shutdown to reflash the rom, good will detect root and deactivate the handheld. Also since I disable the superuser user entirely when you flash the new rom, you will lose root and will need to enable the superuser user and reflash the rom to fix things... You can always just fix it with adb but renabling superuser... But that is a pain.
(pre-JB only) Permissions Denied takes FOREVER to startup, several minutes at least & you repeatidly see it getting root permissions, at first I thought it was having issues but that is how it works.
No need to "Lock Permissions" within the Permissions Denied app from what I've seen but ymmv
Under the ROM Developer Options "Root access" is irrelevant, GFE is working just fine with it set to "Apps and ADB right now"
GFE will work fine by wiping app data & initilizing it with a new PIN if you get things cleaned up after a policy violation
No need to get an unlock code from your sysadmins after a policy violation, just wipe app data for GFE & get a new PIN (assuming you have access to a website to request a new PIN
A mini-how to for connectbot:
I prefer this because connectbot is a simple tool and I like to keep it simple. But you may prefer the script manager interface instead.
With connectbot, you can create 2 'local' connections. One for each of the enable/disable scripts appropriately named. You can edit each of the local connections and setup 'post-login automation'. In the post-login automation you add the following (Note that <enter> means to put a line feed... i.e. hit enter ):
Code:
/system/xbin/dger;exit
<enter>
Code:
/system/xbin/egdr;exit
<enter>
You can either open connectbot each time and run the enable or disable scripts or you can add connectbot shortcuts to each local connection on your launcher's desktop. Its under 'add shortcut' you will see connectbot.
If you, like me, get annoyed by the notification icon from connectbot, you can optionally do these steps to execute it.
In the connectbot options, disable persistence. Also you can replace the ';exit' in the post automation commands with ';kill $PPID' and that will get you very close a self closing command. That will terminate the shell session you are in. When disabling GFE you'll still have to hit the back button but when enabling GFE it wont stay in your notification bar.
Example:
Code:
/system/xbin/dger;kill $PPID
<enter>
The negative is that if there was an issue, you wont see the log. I may add logging support in the scripts so that we can go back and look easier anyway at what failed if we get a lock out. If you ever needed to debug though just remove that temporarily and you'll see the log again.
If you wanted a few seconds to review the log, you could do something like this also:
Code:
/system/xbin/dger;[COLOR="Red"]sleep 5[/COLOR];kill $PPID
<enter>
A mini-how to for script manager:
In script manager you will add the scripts into script manager and execute them via the app or it's widgets. The scripts should NOT be setup to run as superuser but they still will prompt for super user when the disable one is actually executed and you should respond GRANT to that request. You will use the app to find the scripts in /system/xbin chosing the following:
Code:
/system/xbin/dger
Code:
/system/xbin/egdr
FAQ
Q: If I am going to dirty flash a new rom (no data wipe), What do I need to do to keep GOOD in compliance?
A: IT'S LIKE DANCING AROUND A LAND MINE! You will want to follow this process before and after flashing dirty:
Run dger to return root to your device and disable GOOD
Reboot into cwm
Flash rom and do any other rom specific instructions including any reboots or whatever the rom maintainer wants you to do.
Reflash the gfe_workaround zip from the op since flashing the rom overwrites it.
Boot into the rom and set it up as you like with root...
Run disable good enable root.sh to make sure things are well after rom flash.
reboot one last time
use scripts as normal
Q: If I am going to clean flash a new rom (wipe data), What do I need to do to keep GOOD in compliance?
A: Clean Flashing will require you to restore the good app or jsut reactivate it. You can likely avoid reactivation by following this. YMMV
Run dger to return root to your device and disable GOOD
Use Titanium Backup (or similar like carbon) to backup the GOOD app and data.
Reboot into cwm
Flash rom and do any other rom specific instructions including any reboots, wiping data/system or whatever\ the rom maintener wants you to do.
Reflash the gfe_workaround zip from the op since flashing the rom overwrites it.
Boot into the rom and set it up as you like with root...
Restore GOOD with Titanium. You may need to also restore your android ID with titanium as I am not sure if it hashes that ID with activation credentials.
Immediately run dger BEFORE REBOOTING to make sure things are well after rom flash.
Ensure you redisable any permissions denied things and autostarts.
reboot one last time
use scripts as normal
DEBUGGING PROCESS
So you've experienced a policy break/lockout? Now what?? This is how you can debug and give me what I need to help you if required:
flash newest scripts in OP and boot up and let it settle.
run the disable good script.
run enable good script.
run disable good script again.
That will create log files in /sdcard/ with the same names as the scripts. You can review those or submit them to me in this thread and I can look. I will also need the following. I review these files to see if there are any 'other' superuser or supersu apks that my scripts have missed. I will need the /sdcard/gfe.txt after you run the below to assist posted in the thread.
Run the following commands in a connectbot shell after above:
Code:
Code:
su
find /system/app /data/app /system/bin /system/xbin|sort > /sdcard/gfe.txt
pm list packages >> /sdcard/gfe.txt
Then give me these following logs:
/sdcard/gfe.txt
/sdcard/egdr.......log
/sdcard/dger.......log
Some of the most common reasons for lockouts are because of the running of certain root apps prior to enabling good. Certain root apps still retain root access after you close them. Notably es explorer and titanium. I'm sure there are others but this is two that I know of. If you use those tools either disable root access in them if applicable or reboot before running good after using them.
Change log
04-20-2013 (v16):
Renamed scripts and binary
04-03-2013 (v16):
Added "script complete" messages to output.
04-02-2013 (v15):
Added command line option to turn off auto-launch of GFE. The default will remain to auto-launch it.
04-01-2013 (v14):
Went back to sparky su as other su is causing too many anomolies.
FAQ added to OP.
02-26-2013 (v13):
Removed execution speed enhancement introduced in v11 as it caused some issues.
02-22-2013 (v12):
Further improved Logging to sdcards
Added some enhancements and termination of some root apps(titanium)
02-14-2013 (v11):
Improved script execution speed by parallelizing some operations
Added logging to /sdcard if available
02-04-2013 (v10):
Changed the way I handled superuser apps (or multiples) stored in data and system.
Added ability to handle chainfire's nonag apk in addition to regular supersu.
Started using supersu's su for a more secure setup.
Revamped directions and cleared up some errors in the OP.
01-29-2013 (v9):
added new mask for apk
added error handling for mounts incase.
01-25-2013 (v8):
reversed order of hiding apks between system/data to resolve
issue of supersu/superuser "forgetting" settings when rerooting.
12-18-2012 (v6):
added supersu support
fixed left over apks from super app upgrades
12-14-2012 (v3):
Added clean exit commands.
12-13-2012 (v2):
- Discovery that new script manager may cause compliance issues and doesn't work after temp unrooting!
12-12-2012 (v1):
- Fixed bugs
- Automated variables
- Created flashable setup script
- Simplified the install process
12-10-2012 ():
- Initial design
The 'manual' process may not work anymore. I believe supersu apks are getting picked up for compliance. There are a few more manual ways listed in this thread that may or may not work for you but you are welcome to try them.
MANUAL PROCESS
If the script process is too complicated for you and you want to do things manually, you can do this as well. It is a pain though and more prone to getting the handheld disabled by good because of user error (forgetting to do something).
The key to this way is that gfe doesnt appear to detect supersu apk and does detect superuser apk. Not sure how long this will last! ymmv
You can install supersu, open it and let it authorize. Then rename /system/app/Superuser.apk to super_user.rob since its not needed anymore and let supersu do the authorizations.
Then install "app quarantine" from the market or titanium backup. These apps let you freeze and unfreeze the gfe app so you can bounce between a rooted and unrooted phone. (hint: there are widgets for this in titanium and app quarantine that are much more convenient)
If pre_JB, Install "permissions denied" (in app store) to remove the some of the permissions from the app. specifically you must remove
READ_LOGS
The process is as follows once the above is complete and gfe is installed and you want to use gfe:
FROST GFE(reroot)
open gfe and go into preferences and select "disconnect" and then select shutdown good. VERY IMPORTANT TO DISCONNECT AND SHUTDOWN from within the GOOD app. Do NOT just hit the 'HOME' button and reroot. It WILL detect that it has been frosted and unfrosted if you do not follow this advice
immediately open supersu app and go to settings and select "enable supersu" to reenable root.
open app quarantine (or titanium) and freeze good so it won't autostart.
You can now use the rooted phone like normal.
when you want to use gfe, temp unroot as follows:
UNFROST GFE(temp unroot)
using titanium or app quarantine defrost gfe.
immediately open supersu and go to settings and uncheck "enable supersu". the will hide the su binary and temp unroot.
open gfe and use it like normal.
once done using gfe, refrost it like above
this works very well but ymmv. The scripted method works much better.
Finally had success getting GFE running a recent CM10 nightly on my AT&T SGS3 thanks to calisro. Thanks for figuring out a good work around to enable GFE! It looks like my issues this go around were with Permissions Denied & me doing some uninstall-re-install of GFE.
My process (tweaks to calisro's stuff mostly):
Uninstalled ES explorer (just to make sure it is not causing issues for now)
Installed GFE
Installed Script Manager (I've since upgraded to Script Manager-SManager(NoAds), always a good idea to support the devs)
Installed Permissions Denied
Installed su as /sdcard/rob_su
Opened Permissions Denied and disabled the following permission for the Good Application: READ_LOGS and RECEIVE_BOOT_COMPLETED
Rebooted from within Permissions Denied, checked & verified Good had the 2 permissions in question denied
Created the 3 scripts using the updated versions recently posted
setup_rootdoor.sh
enable_good_disable_root.sh (complete with the missing final line noted above)
disable_good_enable_root.sh
With Script Manager, ran setup_rootdoor.sh
Deleted all data for GFE through app manager
With Script Manager, ran enable_good_disable_root.sh
Activated GFE
Working GFE
Notes:
Permissions Denied takes FOREVER to startup, several minutes at least & you repeatedly see it getting root permissions, at first I thought it was having issues, but I guess that's normal behavior
No need to "Lock Permissions" within the Permissions Denied app from what I've seen
Under Developer Options "Root access" is irrelevant, GFE is working just fine with it set to "Apps and ADB right now"
GFE seems to be sucessfully cleaned up by deleting app data from within app manager
GFE will work fine by wiping app data & initializing it with a new PIN if you get things cleaned up after a policy violation
No need to get an unlock code from your sysadmins after a policy violation, just wipe app data for GFE & get a new PIN (assuming you have access to a website to request a new PIN
Logs & thoughts from of my previous failures & troubleshooting steps http://forum.xda-developers.com/showpost.php?p=33025295&postcount=5
Fallon said:
Finally had success getting GFE running a recent CM10 nightly on my AT&T SGS3 thanks to calisro. Thanks for figuring out a good work around to enable GFE! It looks like my issues this go around were with Permissions Denied & me doing some uninstall-re-install of GFE.
My process (tweaks to calisro's stuff mostly):
Uninstalled ES explorer (just to make sure it is not causing issues for now)
Installed GFE
Installed Script Manager (I've since upgraded to Script Manager-SManager(NoAds), always a good idea to support the devs)
Installed Permissions Denied
Installed su as /sdcard/rob_su
Opened Permissions Denied and disabled the following permission for the Good Application: READ_LOGS and RECEIVE_BOOT_COMPLETED
Rebooted from within Permissions Denied, checked & verified Good had the 2 permissions in question denied
Created the 3 scripts using the updated versions recently posted
setup_rootdoor.sh
enable_good_disable_root.sh (complete with the missing final line noted above)
disable_good_enable_root.sh
With Script Manager, ran setup_rootdoor.sh
Deleted all data for GFE through app manager
With Script Manager, ran enable_good_disable_root.sh
Activated GFE
Working GFE
Notes:
Permissions Denied takes FOREVER to startup, several minutes at least & you repeatedly see it getting root permissions, at first I thought it was having issues, but I guess that's normal behavior
No need to "Lock Permissions" within the Permissions Denied app from what I've seen
Under Developer Options "Root access" is irrelevant, GFE is working just fine with it set to "Apps and ADB right now"
GFE seems to be sucessfully cleaned up by deleting app data from within app manager
GFE will work fine by wiping app data & initializing it with a new PIN if you get things cleaned up after a policy violation
No need to get an unlock code from your sysadmins after a policy violation, just wipe app data for GFE & get a new PIN (assuming you have access to a website to request a new PIN
Logs & thoughts from of my previous failures & troubleshooting steps http://forum.xda-developers.com/showpost.php?p=33025295&postcount=5
Click to expand...
Click to collapse
FYI, I simplified the install with a flashable zip and some modifications to the scripts so that the work they do is dynamic rather than hard coded.
Discovered that the new Script Manager is potentially causing policy compliance issues. See the op for alternative or older version of script manager.
calisro said:
Discovered that the new Script Manager is causing policy compliance issues. See the op for alternative or older version of script manager.
Click to expand...
Click to collapse
Does it only trip when you use it? I think I saw Script Manager update a couple days ago, but haven't had any problems yet. Then again I haven't needed to mess with SM at all since then or even engage root for anything since I got GFE working on CM10 a week or so ago.
I'm having it fail compliance by simply having it installed. I've gone through and upgraded, tested, downgraded, tested, etc for a number of times to be sure and it keeps tripping as soon as it is used once. I've even installed it,denied superuser for the app, then used connectbot to actually run the script and it still failed. As soon as I go back to older version it works flawlessly again.
I'll be interested if yours' trips when toggle root and good once again.
De easiest way to perform tasks that require root is to use chainfire's exynos exploit apk to acquire root and when you're done use supersu to unroot.
Make sure you stop de GFE service before rooting! I just did this and GFE really stops working as I rooted, cleaned up my new polish Note 2 4.1.2. rom, unrooted, booted and used GFE like before, no policy violations.
Whatever you do, do not boot before you unrooted.
blackspp said:
De easiest way to perform tasks that require root is to use chainfire's exynos exploit apk to acquire root and when you're done use supersu to unroot.
Make sure you stop de GFE service before rooting! I just did this and GFE really stops working as I rooted, cleaned up my new polish Note 2 4.1.2. rom, unrooted, booted and used GFE like before, no policy violations.
Whatever you do, do not boot before you unrooted.
Click to expand...
Click to collapse
I wouldn't call that the easiest but to each their own.
While that may work for some people for a short time, it doesn't address a lot of things:
1) Doesn't work with superuser since Good detects the superuser apk and doesn't detect supersu yet. Detection of supersu will be added to Good at some point since its use is being coming more prevalent.
2) That exploit will be addressed soon since it affects millions of hand sets. Samsung will close the exploit and AOSP/AOKP will also address the exploit. So it will be useful for a short time only.
3) It only works for Samsung exynos based handsets only. My method is generic.
4) Requires reboots to bounce back and forth between root and unroot. Would be tiresome to do this many times a day.
5) if you reboot while your rooted, you'll get policy breaks.
v6 works great. the new method of CWM installation of scripts makes it very easy. i used the free autorun app "autorun manager" to disable the receiver flags of GFE.
the only annoyance that really is not bad is that when GFE is disabled, the shortcuts/widgets i have are removed since the app is hidden. a very acceptable price to pay considering my company has the "root" compliance turned on. this at least gives me access to email w/o rebooting when needed.
Thanks for all the work!
Do you have to use CWM recovery to flash the zip or can I use the team win recovery. I'm on Verizon note 2 with jelly beans v4 rom.
Thanks, Will
Sent from my SCH-I605 using xda app-developers app
wc4482 said:
Do you have to use CWM recovery to flash the zip or can I use the team win recovery. I'm on Verizon note 2 with jelly beans v4 rom.
Thanks, Will
Sent from my SCH-I605 using xda app-developers app
Click to expand...
Click to collapse
I have not tried twrp but it should work fine.
calisro said:
I have not tried twrp but it should work fine.
Click to expand...
Click to collapse
Just wanted to say thank you for your scripts. Installation worked perfectly on TWRP and to be safe I froze ES file Explorer in titanium since it came with my ROM.
I think my favorite part of the re root script is killing Good and not being bothered by work emails unless I want to be.
Sent from my SCH-I605 using xda app-developers app
glad they are working for you. what rom and phone are you on?
calisro said:
glad they are working for you. what rom and phone are you on?
Click to expand...
Click to collapse
Jelly Beans v4 ROM for Verizon Galaxy Note 2
Sent from my SCH-I605 using xda app-developers app
Good unrooted
Hi,
I've tried lots of different options, being a complete noob at this unrooting malarkey.
Having had a nightmare rooting, I finally managed it, only for Good to then not work because it was rooted.
I finally managed it thus: Downloaded the paid for version of SuperSU. Selected the 'clean up for complete unroot option', downloaded GFE, and self served a new pin, installed Good, went through the setup steps, et voila!
Have rebooted a couple of times and it's still working. Fingers crossed.
Galaxy S3 i9300 with a nightly build of CyanogenMod 10.1 Jelly Bean 4.2.
Not sure if it'll keep working, but I really hope so!
Bestbaldmanever said:
Hi,
I've tried lots of different options, being a complete noob at this unrooting malarkey.
Having had a nightmare rooting, I finally managed it, only for Good to then not work because it was rooted.
I finally managed it thus: Downloaded the paid for version of SuperSU. Selected the 'clean up for complete unroot option', downloaded GFE, and self served a new pin, installed Good, went through the setup steps, et voila!
Have rebooted a couple of times and it's still working. Fingers crossed.
Galaxy S3 i9300 with a nightly build of CyanogenMod 10.1 Jelly Bean 4.2.
Not sure if it'll keep working, but I really hope so!
Click to expand...
Click to collapse
If you completely unrooted it should be fine but now you don't have root unless you reflash. The point here was to offer a way to temp unroot.
calisro said:
If you completely unrooted it should be fine but now you don't have root unless you reflash. The point here was to offer a way to temp unroot.
Click to expand...
Click to collapse
*hangs head in shame for being a dumbass*
That said, it's no biggie to reflash with CF Root whenever I need Root. Which won't be very often I can't imagine... I've had the phone six months and only flashed it cos I got so frustrated with TouchWiz and the horrendous lag I was getting.
The SGS3 is my work phone; I'm an iOS boy for all my personal stuff (sorry!), so I'm quite used to operating without Root access!
Bestbaldmanever said:
*hangs head in shame for being a dumbass*
That said, it's no biggie to reflash with CF Root whenever I need Root. Which won't be very often I can't imagine... I've had the phone six months and only flashed it cos I got so frustrated with TouchWiz and the horrendous lag I was getting.
The SGS3 is my work phone; I'm an iOS boy for all my personal stuff (sorry!), so I'm quite used to operating without Root access!
Click to expand...
Click to collapse
But the scripts in the OP didn't work for you? What problems did you have?
I understand if it ain't broken don't fix it, but I'm also a noob and was able to get this working- the best of both worlds now!
Sent from my SCH-I605 using xda app-developers app
wc4482 said:
But the scripts in the OP didn't work for you? What problems did you get have?
I understand if it ain't broken don't fix it, but I'm also a noob and got the best of both worlds now!
Sent from my SCH-I605 using xda app-developers app
Click to expand...
Click to collapse
Truth be told, i'm not sure what happened. Flashed the ROM, installed connectbot, ran the scripts; nothing happened. Searched for the scripts in system/xbin but couldn't find them.
This was at the end of two days of battling with connection problems with Odin, phone getting stuck in Download mode, SD card not being recognised with the nightly build of CM 10.1 I was using, and a few other things.
I could probably have made it work, but being as my primary goal was to get rid of TouchWiz and all the Vodafone clag on the phone, that has been achieved.
At some point in the future, i might have another go. But as I'm someone who loves technology but isn't a techie, the instructions on most of these blogs are a bit difficult for my small brain to follow.
That's obviously my problem, not anyone else's, but it takes me a while to penetrate the language and understand what people mean. So, unless I really, really need to be switching back and forth between root and no root, I'll probably leave well alone for a while now.
Thanks, though, to everyone who is clearly a lot, lot cleverer and more persisten than I am for making all this wonderful stuff available.
Latest end-user Omnirom 4.4.2 for the LG P500 can be found here:
http://jenkins.androidarmv6.org/job.../archive/omni-4.4.2-20140214-p500-NIGHTLY.zip
I am starting this to stimulate interest in the Omnirom, get/give advice and help on how to get it working on our device. My hope is that one of the devs would take this over and move from a discussion to a dev thread if need be. I can really offer no help at this point as I have not yet gotten this installed and running.
Another reason to start this is to keep from less than courtiously cluttering other threads with this stuff.
Finally, cm-11 for our device is quite problematic so I seek another Kitkat chocolate treat
==================================
Omni has two big problems holding up a working install on our device:
1. Omni is not rooted by default. I tried flashing a superuser.zip, still had no root. I have copied a full cm-11 su (binary) to the zip, tried that but installation was aborted for other reasons so could not yet test this approach. Please, devs, give us normal root in this ROM. Not so useful without it.
2. No adb until boot completed and I approve it. Great idea for security, but this thing is still experimental. So I cannot ride herd on the installation as I am accustomed nor run a certain script that I need from later cm10.* and cm11. As it turns out, Omni will run the script, cm11 would not. However, once I have attempted an Omni boot, I cannot get adb back outside of that successful boot until I restore another ROM! Means no adb reboot, adb reboot recovery, nada. Makes things very very problematic.
Omni will run my /data/local/userinit.d/ scripts which recent cm10.* and cm11 refuse. I always ran ICS this way, and I could presumably get a complete startup sans boot this way. To try this next--caution: Kitkat Link2sd mount script is not identical to previous ones so this must be placed to try this. Using the older version (maybe newer one as well!), everything simply FCs out, get nowhere. Link2sd needs root the create the script normally, Xposed needs root to get going, and Titanium and other tools are more useful with root as well. Lack of root is the main problem right now. Please ...
==========================
The usual disclaimer: If you have rooted your device, the warantee is void. Of course, for this oldie but goodie, that is just a distant memory. However, these phones are still being sold so if you got a new one, be warned.
I can not be responsible for brickage and breakage. Especially without that always active adb umbillical, it is much easier to soft-brick the device and it can get hairy-scarey getting back to recovery. Again, be warned.
The recent JB and KitKat ROMs are too large for our devices and must be trimmed before installation. My philosophy is that anything not needed to get Android up and running does not belong on system. Practically, anything installable from Play or side-loadable as user apps should be removed from system/app. Examples are Calendar (install Play version), calculator, camera/gallery, browsers, emailers and such. There are superior choices on Play or side-load those included with the ROM. If using Google Search, also remove the quicksearchbox. system/usr/srec, system speech recognition config, can be pushed to sdext and symlinked from there, freeing a good few meg. You do not need a lot but do need a few meg free on system.
Link2sd or equivalant is needed to keep data space available. Things get flakey when data space gets too low. Gluttonous apps like the newer Swype and Tapatalk (just a few examples--great apps, do not get me wrong) will very quickly run you out of data space and gobble up too much RAM as well, slowing the works. Choose wisely
So here is my next trial:
BACKUP!
Make sure no old 11link2sd script is on /data/local/userinit.d/
Wiped dalvik-cache, restored the sdext from the backup since the CWM seems to wipe this as well.
Wiped cache partition (actually, no longer used for very much!).
Installed the omni nightly which formats /system and proceeds.
Installed the minimal GAPPSlight.zip.
Reboot.
Came up just fine. First asks to enable adb for this computer, said "yes," "always for this computer."
Adb now active and adb, in any event, adb does have root!
Went to link2sd. Cannot get root. Went through all the setup options (including root for apps and abd!). Still not root.
So copied a new 11link2sd to /data/local/userinit.d/
Power menu advanced reboot active in setting and it actually works, avoiding above-mentioned fears
Rebooted.
Bootup runs all my scripts so now have all the link2sd-linked apps.
I could call this a BUG: It neither re-asks the adb question nor places it online. So ... no more abd
Still no root -- tried to activate exposed which without root will not do anything.
Rebooted anyway.
Came up just fine, as before. No root, no Xposed, Still no abd.
Comments:
Otherwise, works just fine, seems responsive. If I were willing to live without root, I could go on with it as a daily driver. Next trial, I will not check "always for this computer." Maybe then it will re-ask me and so re-enable abd.
Shares with cm-11 the flash of a disabled homescreen before the lockscreen. Harmless (as long as it is very brief).
Shares with cm-11 the "upgrading ... restarting apps ..." message on each reboot. Harmless, as long as linked apps, dexes are not being unlinked. Did not check, but cm-11 was no longer do that with the newest link2sd version.
The screen begins to turn off much more quickly. In cm-11, this took a good few minutes, eating the battery as it went.
Background processes came up more quickly (subjective) than cm-11, even though some lacked root to function correctly.
Did not really check if it shares the dissappearing data space problem which for many is a showstopper in cm-11. Initial space seemed appropriate, not half of expected amount. Without adb, can be checked using the SLW storage widget. I should really have done this.
Root remains the main problem with this. Neither flashing a superuser nor placing a full cm-11 su on the ROM enable root. Someone know how?
Attempts at getting root:
The recommended way is to flash SuperSU's zip (available from their XDA thread, surprisingly, not from Play). Since flashing this has twice bricked me up, I am loath to try that once more.
First attempt was the create an init.d type script to start the su daemon. I had placed a Cm-11 su on the ROM's zip before flashing. Voile, manually running that script from adb got me root. The command on adb shell hung up but it had run. Link2sd made its mount script (of which I have my own copy so whatever ...), even accepting the previous approval!
So I placed it on /data/local/userinit.d/ with all my others. On reboot, daemon was indeed running. Tried to activate Xposed. Attempts hung up, then failed. Running superuser (installed from Play as user app, symlinked) would FC. Noticed that I had multiple incidences of the su running which might be indicative of something!
So went back to recovery, removed my script, and flashed the CMW superuser.zip. On reboot, daemon was running. However, any attempt to use superuser FC'd. Removed the apk from system/app, rebooted to regain use of my installed version. Same result.
This issue of root needs be properly resolved to use this ROM.
So back to recovery and cm-10.2 which meanwhile may well be the optimal ROM for this device!
BTW: If the always for this computer was not checked on giving adb permission, after reboot and after a while, the question will be re-asked and one can get adb once again which is good new, though a bit less convenient.
This omni ROM from my humble opinion is quite bizarre and funny. What's really the intention to release ROM that need rooted device to install it (need recovery so first device must be rooted), but then rooted apps didn't work since no SU installed .
Sorry omni devs and anyone. No offence. Just express my opinion.
I tried Superuser.apk and SU from xda but failed.
Sent from my Optimus One using xda app-developers app
Some things I'd like to ask/share
1. My play store isn't working. I've trimmed the ROM n installed gapps too n installed play services too. Bt when i open play store, it works fine. But i can only see spinner loading under 'My Apps' n when I install any app, it gives fc. Then i have to clear data to open it again. What to do? Is it something to do with dpi? Because I've changed the dpi.
2. How to change tiles? I can't get its settings.
3. Any other int2ext script working?
4. Screen record has a very low fps and after recording, the phone becomes unusable. Have to restart
5. I found this ROM more snappy than any other CM11. Thanks to performance controls. Its awesome!
6. Only if root worked, this would be the BEST KitKat ROM for our phone.
(I'm trying to fix it too)
This ROM can be used aa a daily driver if u don't use much apps and root isn't a big issue. Great work
:thumbup:
EDIT:
Link for root in Omni ROM:
http://forum.xda-developers.com/showpost.php?p=50863602
Sent from my LG-P500 using XDA Premium 4 mobile app
Tried again to get root:
I can, in adb shell, su --daemon.
This gets me root for this session. Link2sd will create its mount script!
Rebooted. Thought that the root could be magically persistent as someone posted on some thread somewhere (did a lot of searching! and there were two instances the last time when I used a init.d script to do this). It was not so did su --daemon. Tried to use Xposed. Chugged a while, permission denied. CWM superuser's UI does not work on cm-11, not on this either. But it did not FC!
So I adb pushed SuperSU to system (I have enough room!). It wanted to install its binary. So I rebooted into recovery and flashed that.
On reboot, the su daemon was indeed running It has an 'R' instead of an 'S' on the column before its name. SuperSU also had a process running so thought hey, OK (and it did not brick the phone this time!). Tried to run Xposed. Simply sat there. Tried to run SuperSU, said it needed its binary and could not install it. Yuk! Never did like this app. On cm-10.2, even if CWM superuser wants a new binary, its UI will work anyway. Tried to run that. FC this time.
I never did check free data space.This after several successful reboots with no alarms about it. Overlayed the SLW widget onto link2sd and ran it. Only had 20meg. Fact is I had never ran link2sd to clean up dalvik and such so tried it now. Relink all apps simply chugged along. This can take time, even if it reports nothing to do! Finally lost patience with it but could not kill link2sd with back key (My fault? Options do not take effect until setting run, even if they were checked, it seems). Have to consider the possibility that the "disappearing data space" bug may be in this ROM as well as cm-11 (which, if so, would place it in the AOSP code!). No real way to check it without working root so everything plays.
Rebooted recovery, back to cm-10.2. BTW: the su daemon here has the 'S'.
rhar**** said:
Some things I'd like to ask/share
1. My play store isn't working. I've trimmed the ROM n installed gapps too n installed play services too. Bt when i open play store, it works fine. But i can only see spinner loading under 'My Apps' n when I install any app, it gives fc. Then i have to clear data to open it again. What to do? Is it something to do with dpi? Because I've changed the dpi.
Click to expand...
Click to collapse
Don't know. I only change DPI using Xposed which has not been enabled yet
2. How to change tiles? I can't get its settings.
Click to expand...
Click to collapse
I assume you mean those on the right-side pulldown. Have not found the interface either. Toggle to get that and enough of them are there.
3. Any other int2ext script working?
Click to expand...
Click to collapse
Need root. I did get link2sd to create it mount script after su --daemon.
4. Screen record has a very low fps and after recording, the phone becomes unusable. Have to restart
Click to expand...
Click to collapse
Never tried it. May also be DPI related?
5. I found this ROM more snappy than any other CM11. Thanks to performance controls. Its awesome!
6. Only if root worked, this would be the BEST KitKat ROM for our phone.
(I'm trying to fix it too)
This ROM can be used aa a daily driver if u don't use much apps and root isn't a big issue. Great work
:thumbup:
Click to expand...
Click to collapse
Yeah. Since I can get link2sd mounts either by running the daemon once or placing my copy, I have all my apps available (root ones will not be very happy). I used Xposed and need one round of root for this but that, as opposed to link2sd, did not work.
I have to admit that I do not know much about how su works. But the same su file is present in /system/xbin and is listed in file_contexts. SU.apk or supersu.apk have not been included in /system/app for at least cm10.1+.
Sent from my LG-P509 using Tapatalk 2
ibub said:
I have to admit that I do not know much about how su works. But the same su file is present in /system/xbin and is listed in file_contexts. SU.apk or supersu.apk have not been included in /system/app for at least cm10.1+.
Sent from my LG-P509 using Tapatalk 2
Click to expand...
Click to collapse
Is that su in /system/xbin is binary command to get root access on system file? You must run this command in terminal. However, Terminal.apk only can be launched if SU.apk or Superuser.apk present in /system/app.
So, in my opinion SU or Superuser is needed to run rooted apps (such as TB, Link2SD). Maybe Busybox is required too?
Sent from my Optimus One using xda app-developers app
ibub said:
I have to admit that I do not know much about how su works. But the same su file is present in /system/xbin and is listed in file_contexts. SU.apk or supersu.apk have not been included in /system/app for at least cm10.1+. :confused
Click to expand...
Click to collapse
System/xbin/su is the binary. One included on the ROM is tiny, barebones (no root). I replaced it with one from cm-11. When it is working right, I believe this gives you the dialog: Allow-Deny, Now-10min-always and such. It also has a daemon mode which services root access. I have not gotten the dialog on the Omni after manually starting the daemon.
That daemon needs be started early-on. Even an init.d script may not be good enough (Omni has real init.d capability as opposed to cm-11!). There is a "persistant-root" item in cm-11's build.prop. Maybe this will work here too the with cm-11 binary?
The apk is a user installable app (or gets placed on system by flashing zip). This gives access to the application-by-application permissions granted or denied in the above dialog, enabling changing them. SuperSU offers the most alternatives but is the most ticklish. CWM superuser is simpler, less finicky but seems not to work on 4.4.*. This is part of the problem. On cm-11, I have root, have the above dialog, superuser does not FC but no UI. On the Omni, since root was achieve manually after-the-boot, more problematic.
There are other apks around, superuser-elite, paid versions, etc. They are not exclusive--I had three of them around until I removed them and kept CWM. Any one of them good on cm-11? Should!!! work here too, he-he. The apk is not necessary to service root (i.e. mine is link2sd-symlinked and before link2sd gets its root, no mount script so no app seen).
xu3sno said:
Is that su in /system/xbin is binary command to get root access on system file? You must run this command in terminal. However, Terminal.apk only can be launched if SU.apk or Superuser.apk present in /system/app.
So, in my opinion SU or Superuser is needed to run rooted apps (such as TB, Link2SD). Maybe Busybox is required too?
Click to expand...
Click to collapse
Busybox is there, we do not have gnutls like normal distros--most everything goes through included busybox.
Terminal will work without the apk on /system/app. Cannot judge from the Omni because of no or incorrect root
I just learned a new set of tricks.
[email protected]:/ $ su -h
Usage: su [options] [--] [-] [LOGIN] [--] [args...]
Options:
-c, --command COMMAND pass COMMAND to the invoked shell
-h, --help display this help message and exit
-, -l, --login pretend the shell to be a login shell
-m, -p,
--preserve-environment do not change environment variables
-s, --shell SHELL use SHELL instead of the default /system/bin/sh
-v, --version display version number and exit
-V display version code and exit,
this is used almost exclusively by Superuser.apk
[email protected]:/ $
Sent from my LG-P509 using Tapatalk 2
ibub said:
I just learned a new set of tricks.
[email protected]:/ $ su -h
Usage: su [options] [--] [-] [LOGIN] [--] [args...]
Options:
-c, --command COMMAND pass COMMAND to the invoked shell
-h, --help display this help message and exit
-, -l, --login pretend the shell to be a login shell
-m, -p,
--preserve-environment do not change environment variables
-s, --shell SHELL use SHELL instead of the default /system/bin/sh
-v, --version display version number and exit
-V display version code and exit,
this is used almost exclusively by Superuser.apk
Click to expand...
Click to collapse
Yes, this simply a root version of sh. The one on this ROM probably will not allow anything.
The one from cm-11 will check permissions, give the dialog to ask if root working correctly.
Latest build omni-4.4.2-20140227 is up, triggered by androidmeda :good:
http://jenkins.androidarmv6.org/job/omni/4/
Download here:
http://jenkins.androidarmv6.org/job/omni/4/artifact/archive/omni-4.4.2-20140227-p500-NIGHTLY.zip
Will try is that SU or Superuser included
EDIT:
Just flashed it with clean install.
1. System reboot took under 3 minutes :good:
2. su binary exist at /system/xbin but not link to busybox binary which is present also at /system/xbin.
3. Installed Terminal.apk, it works but denied to run su command line
4. Installed Root Explorer.apk, works fine but failed to access root, such to change permission R/W of /system folder.
5. Referring to 3 and 4, apps need root access failed to work.
6. Tried to install SuperSU flashable zip, it replaced su binary from stock and it caused apps which is need root access (in my case gooim manager, root explorer, and Link2SD) not responded and apps're getting hang
7. Installed Superuser, launched it, works but need su binary.
Do we need latest SuperSU or Superuser, hence su binary is compatible with Android 4.4.2 ?. The installed one is for Android 2 and 3.
xu3sno said:
Latest build omni-4.4.2-20140227 is up, triggered by androidmeda :good:
http://jenkins.androidarmv6.org/job/omni/4/
Download here:
http://jenkins.androidarmv6.org/job/omni/4/artifact/archive/omni-4.4.2-20140227-p500-NIGHTLY.zip
Click to expand...
Click to collapse
Do not know what has changed. There have been kernel merges, etc.
***
2. su binary exist at /system/xbin but not link to busybox binary which is present also at /system/xbin.
3. Installed Terminal.apk, it works but denied to run su command line
***
Click to expand...
Click to collapse
The /system/xbin/su included with this ROM is for no-root access allowed. A blocker.
I placed the su from a cm-11 ROM. This can run its daemon and get root access. Works for link2sd but nothing else (i.e. Xposed), apparently. According to some googled posts, that daemon must be started very early on (as I stated before). I had it in an init.d script. Started but had same negative results. May try the persist.sys.root_access=1 flag in build.prop. Maybe the internally buried code in boot.img will start the daemon as requested here (if it was not removed). There is no explicit script in the cm-11 ROMs to start that daemon.
i have got an idea. But where is the source?
is this the source?
If yes, then where is settings?
EDIT:
Ok got it. Editing
rhar**** said:
i have got an idea. But where is the source?
is this the source?
If yes, then where is settings?
EDIT:
Ok got it. Editing
Click to expand...
Click to collapse
Okay. Waiting for edited omni ROM (SuperSU included ?), as you did with cm-10.1.5-KITKAT-Update_3 :good:
Wish you luck
Sent from my SM-T311 using xda app-developers app
rhar**** said:
i have got an idea. But where is the source?
is this the source?
If yes, then where is settings?
EDIT:
Ok got it. Editing
Click to expand...
Click to collapse
Great. SuperSU itself is problematic but will suffer with it if it works. Would prefer generic like other ROMs.
Anyway, as in my OP, I would be looking for a dev to take this thread over as a dev thread (or open one).
Another OMNI build
Another Omni build is released @ Jenkins, triggered by Androidmeda.Can d'load it from : http://jenkins.androidarmv6.org/view/All/job/omni-experimental/12/
sumansur2008 said:
Another Omni build is released @ Jenkins, triggered by Androidmeda.Can d'load it from : http://jenkins.androidarmv6.org/view/All/job/omni-experimental/12/
Click to expand...
Click to collapse
Labeled for commits about boot animation.
Anyway, downloading.
In our project we "lock down" the device and let only our homescreen app running.
therefore we remove all unnecessary apps, and wondering if we can remove superuser or supersu.apk
of course we need root rights, but we dont need the controlling app
we have tested it on many devices, there are a lot where we could remove supersu.akp and our app kept the root right, but on many other devices we lost the root when we removed it
is there anything we have to handle before we remove it, or how does it work?
thanks,
@oisiss, root is dependent on whether or not there are the su binaries existent in /system/bin (among other things). SuperSU is just a root management app, and its being installed does not affect the root access in the device.
ИΘΘK¡€ said:
@oisiss, root is dependent on whether or not there are the su binaries existent in /system/bin (among other things). SuperSU is just a root management app, and its being installed does not affect the root access in the device.
Click to expand...
Click to collapse
Hello, thank you for your reply, but i have to disagree:
1., to check whether the device is rooted or not is not as simple to check if the su binary exists in the /system/bin folder. even if that exists it can happen that our app (and of course many others: rootchecker, es file explorer...) doesnt get admin rights
2., if it would be so simple the root checker app in the google play wouldnt have 10M-50M downloads
3., in our app we also check if the device is rooted, for that we check 5-6 methods: if the su exists, remounting rw the system foder, run su command, create and delete file in a secured folder...
4., many threads talking about how to replace supersu with superuser. all is telling to install superuser first and only after remove the original supersu, so they never mention to remove supersu firts
we have in our lab aprx 60 devices, made many tests, and this is my question:
1., when there is a properly rooted rom, checked by rootchecker.apk
2., we delete supersu.apk from the system/bin and restart the device
3., we check with rootchecker.akk again and says unrooted
so is there any hidden settings somewhere where for example there are default setting for granting or denying root request? or why do we loose the admin righs
I think there is an aswer:
if the original root was not complete (http://su.chainfire.eu/), it can cause issues
the Install-recovery.sh has to be corrected before deleting the supersu.apk (su, daemonsu...)
can someone confirm this?
oisiss said:
Hello, thank you for your reply, but i have to disagree:
1., to check whether the device is rooted or not is not as simple to check if the su binary exists in the /system/bin folder. even if that exists it can happen that our app (and of course many others: rootchecker, es file explorer...) doesnt get admin rights
2., if it would be so simple the root checker app in the google play wouldnt have 10M-50M downloads
3., in our app we also check if the device is rooted, for that we check 5-6 methods: if the su exists, remounting rw the system foder, run su command, create and delete file in a secured folder...
4., many threads talking about how to replace supersu with superuser. all is telling to install superuser first and only after remove the original supersu, so they never mention to remove supersu firts
we have in our lab aprx 60 devices, made many tests, and this is my question:
1., when there is a properly rooted rom, checked by rootchecker.apk
2., we delete supersu.apk from the system/bin and restart the device
3., we check with rootchecker.akk again and says unrooted
so is there any hidden settings somewhere where for example there are default setting for granting or denying root request? or why do we loose the admin righs
Click to expand...
Click to collapse
Please notice how I phrased it like this:
NOOKIE said:
...root is dependent on whether or not there are the su binaries existent in /system/bin (among other things).
Click to expand...
Click to collapse
I am fully aware that root is not as simple as su being in /system/bin. :silly:
oisiss said:
I think there is an aswer:
if the original root was not complete (http://su.chainfire.eu/), it can cause issues
the Install-recovery.sh has to be corrected before deleting the supersu.apk (su, daemonsu...)
can someone confirm this?
Click to expand...
Click to collapse
Yes, this sounds right. :good: