Database Info

[Q] Thanks! (and HELP!)

Just joined to say thanks to Roebeet and everyone who is active in this forum. Because of the obvious potential of the gtablet being explored here, and discussed on phandroid.com I decided to take the plunge and purchased one tonight. I might have passed this tab by, and waited months for something else...
--and here's where I cry for help!
I carefully followed a series of step-by-step instructions I found thru google, to install the latest tnt lite found here on XDA. Everything seemed to work without a hitch, and was prouder than a pappa to have completed my first root and mod ,ever!
BUT right after I DL'ed and installed the flash 10.1 apk things went south. The browser constantly crashed to the home screen, and the market and email apps were crashing also. I rebooted and now I am greeted by the tnt setup screen that is covered in an endless wave of crash warning dialogs! I can't tap them away fast enough to see the desktop.
I've tried to do a recover, but I can't get thru the setup (that keeps crashing to the first screen also) to use the USB to mount the internal mem to my Mac.
I am insanely happy about the potential of this hardware, but I've painted myself into a corner. ANY help would be greatly appreciated.
And yes, I do look very handsome in my profile pic.

From bad to WORSE!
I discovered the dcom222 thread that describes my problem and details a solution. I followed it to the letter, changing the command and using my microSD as a secondary boot to reinstall the vanilla tnt ROM.
But then it just stuck on the tnt logo, faded in and out 3-4 times, and went dark! The device won't turn on or off (had a full charge when I pulled it from the wall socket a few moments ago)
Please tell me I haven't bricked this thing!

still no luck...
I was able to power the unit back up, but I've tried to recover and flash all three setup files I have (vanilla tnt, ota update tnt and tnt lite 2) but nothing works!
All of them create a loop of some sort, whether it's the viewsonic screen, gtablet screen loop, or the tnt logo screen blinking on and off, NOTHING boots to the desktop.
Going to bed before I drive my self insane. Hopefully someone in the know will reply by the time I check this at work.
thanks in advance

You have not bricked it, don't worry. This device is very hard to truly brick. If all else fails there is nvflash or the apx mode fallback. But I don't think you need that if you are still able to boot to clockwork recovery.
In clockwork go to advanced - mounts and try mounting and unmounting your partitions. I suspect your user partition may be screwed. This seems to happen fairly frequently especially the first time you flash a ROM. It happenend on my first flash and not again since. Clockwork lets you repartition though. Search the forum for partition fix, its not too big a deal.
If that fails try roebeet's thread on nvflash recovery for TNT lite. If that fails, search for APX mode.
As far as I know there are zero bricks from ROM flashing so far.
Sent from my SMB-A1002-3G using Tapatalk

Life in LA said:
Just joined to say thanks to Roebeet and everyone who is active in this forum. Because of the obvious potential of the gtablet being explored here, and discussed on phandroid.com I decided to take the plunge and purchased one tonight. I might have passed this tab by, and waited months for something else...
--and here's where I cry for help!
I carefully followed a series of step-by-step instructions I found thru google, to install the latest tnt lite found here on XDA. Everything seemed to work without a hitch, and was prouder than a pappa to have completed my first root and mod ,ever!
BUT right after I DL'ed and installed the flash 10.1 apk things went south. The browser constantly crashed to the home screen, and the market and email apps were crashing also. I rebooted and now I am greeted by the tnt setup screen that is covered in an endless wave of crash warning dialogs! I can't tap them away fast enough to see the desktop.
I've tried to do a recover, but I can't get thru the setup (that keeps crashing to the first screen also) to use the USB to mount the internal mem to my Mac.
I am insanely happy about the potential of this hardware, but I've painted myself into a corner. ANY help would be greatly appreciated.
And yes, I do look very handsome in my profile pic.
Click to expand...
Click to collapse
Scroll down to post number #869 http://forum.xda-developers.com/showthread.php?t=842004&page=87

feeling better
Thanks for the assurances that I didn't wreck the device, and pointing me to some solutions. I have a few questions:
what is clockwork mod? If I am able to recovery boot from my micro SD card, do I already have it? (I downloaded a bunch of recovery images to start, per instructions)
If it's something I still need to download, is it a PC application? How am I supposed to change settings in it (manage partitions, etc) if I can't get the tablet to boot?
-- stuck at work and dying to get home to fix this thing...

Ok, more detailed instructions:
If you press and hold down Volume + when you are pressing the Power button to boot up, and keep holding the Volume + key until you see a message that says "Detect a Recovery Key Pressed", that should get you to a text menu from which you can navigate using the volume +/- keys and the Home soft button to flash ZIP files and do other things. That menu is ClockworkMod Recovery. Since you remember installing a recovery.img, it sounds like you probably (hopefully) have ClockworkMod Recovery on there.
If you get to ClockwordMod Recovery, you can go down to the Mounts and Storage option, then you will find the "Mount USB storage" option at the end of that list. That lets you plug in and mount your internal memory area as a standard USB drive to your Windows or Mac computer to copy over new ZIP files and the like to your G Tablet.
You can also check that partitions are all mounting and unmounting successfully in that menu. If you go instead into the Advanced menu, you will see Partition SD Card, which I believe is what you might need to do at this point.
If booting with the Volume + button held down doesn't get you anywhere and you see nothing about Recovery Key Detected and don't see any text menu, then you don't seem to have a working recovery. At that point you'll have to do what phfaty suggested, read the post he referenced, and follow the link therein to the tegratab forum post to get the NVidia Tegra SDK installed on your Windows desktop and use the NVFlash tool and APK mode (where you hold the Volume - key down while booting instead of the Volume + key) to reflash your tablet.

still not working...
The good news:
I do have clockwork mod installed. Must have been in 1 of those zips or rars I ran in the very beginning.
The bad news:
it's still caught in a boot loop. I've mounted it as an external drive 3 times now from clockwork, and tried all 3 versions of the operating system (vanilla, vanilla with the ota and tntlite 2) and NOTHING makes a difference.

Life in LA said:
The good news:
I do have clockwork mod installed. Must have been in 1 of those zips or rars I ran in the very beginning.
The bad news:
it's still caught in a boot loop. I've mounted it as an external drive 3 times now from clockwork, and tried all 3 versions of the operating system (vanilla, vanilla with the ota and tntlite 2) and NOTHING makes a difference.
Click to expand...
Click to collapse
1)Boot into clockwork.
2)Navigate to Advanced menu
3)Choose partition sdcard
4)Choose data partition desired size(1024=1GB)
5)Choose 0GB for the next selection(swap not used)
6)Do a factory reset from main menu
7)Reboot
8)If that doesn't work, then reinstall ROM, then reboot

UPDATE
partitioning the drive and wiping the user data did the trick. I'm up and running again. thanks to all who chimed in to help.

[Q] Stuck in a reboot loop, please help

I got my Viewsonic GTablet on Friday (2/11/2011). I loved it and had no issues. I downloaded and installed the update from Viewsonic. I visited the Marketplace that's installed on the device and downloaded some apps, mainly games. Today (2/14/2011) I took it to my university and tried to get on the campus WiFi. I had difficulties, so I took it to the IT department on campus to get some help. They took my device, tried to get it on the network and said that my device could not get on the network because their network uses certain "secure credentials" or something like that. As soon as I get my device back from them, every time it boots up I get and error message that says that Dashboard Home has stopped unexpectedly and to try again. I called Viewsonic's Customer Service, and they determined that I was stuck in a reboot loop. I have tried rebooting the kernel more time than I can count, but it doesn't do anything to help.
Has anyone else been able to solve this problem? I would take it back to the store I bought it from (Office Depot) to get an exchange, but they don't have one in stock anywhere close to where I live, and I don't have the box the device came in anymore.
What do you suggest I do?
The device is running the stock OS with the update from Viewsonic. The only apps I have installed are from the marketplace that comes with the device. I have not tampered with the OS or settings. I am also mildly technically challenged, but I am working on educating myself.
I appreciate any and all help. Thanks in advance. I also apologize if this has issue has already been posted and answered.

vafalla,
This doesn't sound like the boot loops I had, but I guess if it doesn't get you to a screen you can work with the result is the same.
If it were me I would get on a PC and go the the Development part of this forum. I think you need to get ClockWorkMod installed. CWM is a replacement "recovery" program that gives you other functionality to restore, communicate, partition drives and a bunch of other things. There are a couple of threads in the Dev section that tell how. You can download CWM v.08 (the older one works!) and put the update.zip file on a microSD card and edit the recovery folder "command" (no .txt or other ending, just command) file in Notepad to load "sdcard2" instead of sdcard. then put the card in the gtab and reboot holding down the Vol+ key down. You'll get a message in the upper left corner of the screen that recovery is loading. After it installs, if it doesn't startup, reboot with the Vol+ key down again and you should be able to get into CWM.
From there, you can find the CWM partition command and change the two partitions to 2048 and 0.
From there, there are a bunch of threads which tell how to load either a stock recovery file to get back to stock -- or how to load VEGAn 5.1 (or now, 5.11).
Hope this helps get you started. I just didn't want you to think your tab is bricked and that all hope is lost!
Rev
P. S. --- Some of the other threads may have better instructions than mine!!!

Thanks so much for the help! I'll get right on it and see what happens.

Plug in your gtab to the power and see if it boots. Could be they ran your battery down.

Bootloop help
If you really want to learn about the gtablet, youtube ehunyadi. he has done over 10 excellent videos and his most recent is how to install CWM and TNT lite 4.2..sounds like only diereence for you is you'd install CWM to microsd.

[Q] SD card problems!

Hi all, First of all,please forgive me for asking a probably silly question for my first post! Anyway, I got my new Nexus S in the mail the other day, and its nothing short of fantastic I quickly looked up all the cool things I could do with it and I discovered rooting. Btw, please don't take me for a n0ob, I probably sound like one but I do have some limited knowledge about this kind of stuff. Anyway, I proceeded to read up as much as i could, and eventually unlocked the bootloader of my phone from a seemingly helpful guide. I used Clockwork Recovery Mod. A link to the guide I followed can be found here
nexusshacks(dot)com/nexus-s-hacks/how-to-root-nexus-s-or-nexus-s-4g-new/
I also installed superuser following the guide above. This is where my problems start. After this, I started up my phone, and it loaded fine, and i could see the superuser app in the menu. I proceeded to recover all my contacts and previous apps etc, and used the phone for a day. After returning from school this afternoon, I planned to install Cyanogenmod 7. I thought that the best way to do this would be to follow the guide that nexusshacks.com supplied as i previously used their guide. Link here
nexusshacks(dot)com/nexus-s-hacks/how-to-install-cyanogen-mod-rom-on-your-nexus-s/
I booted the phone holding volume up and power, and proceeded to follow the video instructions. when it it came time to enter the recovery mode, my phone rebooted and instead of initiating clockwork, my phone got stuck on the google screen it shows before booting. I understand now that I was supposed to load my preffered roms etc on the internal storage SD before unlocking, and I can't access the SD card to do so. Every time i try and open it on my computer i get "please insert disk into drive x". I haven't downloaded Rom Manager yet, and i know i need to flash clockwork recovery first, but I don't want to risk doing that then attempting to access the SD card, frankly because i'm a little in over my depth (if you haven't already gathered!).
Any advice would be greatly appreciated as to where to go from here.
Thanks!

I don't have a Nexus however with with Evo the process is similar ...can you boot into recovery?
If yes....boot into recovery. 2) then go to mounts/storage 3) mount USB and that should allow you to see your USB in your pc ...4) put the rom of choice on your card 5) unmount
Be sure before flashing that you clear cache, dalvik cache, and wipe data/ factory reset then flash rom ..
See if that helps
Sent from my Swagurious Evo running CM7

Need help after bricking my UK WIFI Xoom

Following various threads here how to successfully unlocking and rooting their device, I've failed on so many levels.
At the moment I think my xoom is semi-bricked because its just stuck on the M screen. I've think I got the recovery screen working last night as I was able to go into recover mode but after updates through wifi I think it possibly stopped it.
So when i reboot and go into recovery mode, I get an exclamation mark over an android. I've tried rebooting and just got it to mount back on Fastboot but when I've tried to wipe it and reflesh it to (recovery-Tiamat-R4c-100611-1150-cwm.img) its not doing what its suppose to do and giving me "unknown partition, Failed to process command error (0x300003)
Any ideas what I need to do?
Btw, I can reboot, voldown and then volup to choose the 3 options but like I said I can't get into the recovery mode properly.

Schizophonic said:
Following various threads here how to successfully unlocking and rooting their device, I've failed on so many levels.
At the moment I think my xoom is semi-bricked because its just stuck on the M screen. I've think I got the recovery screen working last night as I was able to go into recover mode but after updates through wifi I think it possibly stopped it.
So when i reboot and go into recovery mode, I get an exclamation mark over an android. I've tried rebooting and just got it to mount back on Fastboot but when I've tried to wipe it and reflesh it to (recovery-Tiamat-R4c-100611-1150-cwm.img) its not doing what its suppose to do and giving me "unknown partition, Failed to process command error (0x300003)
Any ideas what I need to do?
Btw, I can reboot, voldown and then volup to choose the 3 options but like I said I can't get into the recovery mode properly.
Click to expand...
Click to collapse
Could I ask what steps in rooting you completed successfully and where exactly it went wrong?
Then, what exactly have you done to try to move forward?
Also, which guide did you use?
Don't worry, you're not bricked if you can get to fastboot.

okantomi said:
Could I ask what steps in rooting you completed successfully and where exactly it went wrong?
Then, what exactly have you done to try to move forward?
Also, which guide did you use?
Don't worry, you're not bricked if you can get to fastboot.
Click to expand...
Click to collapse
Last night I followed this videolinked in http://www.youtube.com/watch?v=OYc1lVWm7ks to Unlock OEM my device
I think that worked fine because it didn't throw up any hiccups.
I then followed this http://forum.xda-developers.com/showthread.php?t=1242241 to root it. It didn't have superuser so I downloaded it and installed it and then tried Terminal on the "SU" command. Said I did not have 'permissions'
This morning, I then followed this Youtbue link http://www.youtube.com/watch?v=ZsVpY0PDwtQ and after the first reboot of puting the new .img, it failed to reboot. Now I'm stuck on the M screen.
I think I managed to get my computer to pick up the device in adb fastboot because it responds to that. However when I type in adb devices it doesn't pick up anything...
Next after messing around I managed to flash it to the boot.img on this, http://forum.xda-developers.com/showthread.php?t=1049901
It flashed it ( I think) and worked without errors unlike the other flash I tried today, and its still stuck in M screen.
BTW, this is a UK Wifi Zoom.

Little update - I've downloaded and flash this boot: boot_3.1_insecure.zip from http://forum.xda-developers.com/showthread.php?t=1049901 and now boots up. However my Wifi has now disappeared. I'm in the process of doing a factory reset but will this work?
Still no avail - need to get this wifi working again soon. Think I've finally got access to superuser

Schizophonic said:
Little update - I've downloaded and flash this boot: boot_3.1_insecure.zip from http://forum.xda-developers.com/showthread.php?t=1049901 and now boots up. However my Wifi has now disappeared. I'm in the process of doing a factory reset but will this work?
Still no avail - need to get this wifi working again soon. Think I've finally got access to superuser
Click to expand...
Click to collapse
It sounds like you are on the right track. Hang in there, you'll make it!

Do you have access to an Ubuntu OS? when you connect an android device to a PC running Ubuntu it will mount the internal memory to the PC which makes it much easier to browse the partitions. Also, Go ahead and reflash the CWM recovery through Rom manager (if thats available to UK users) so that hopefully youll get a fresh recovery.img to work with. As far as ADB not noticing the xoom, you probably erased the adb drivers, and is the usb cord youre using 100% data transferable type? I about pulled my hair out a few times because adb wouldnt recognize my phone but realised I was using an older micro usb cable that only allowed electrical current for charging, not data transfer capable. You might also be able to find a clean nandroid backup file from a fellow UK xoom owner, that you trust, and see if they dont mind sending you their backed up boot-img and system-img. Just some guesses, but sounds like you got it pretty well figured out

Hello all, after a bit of self taught ADB and etc and understanding the mechanics how to successfully flash a Xoom, I managed to follow another guide from stratch (unlock oem, etc) and flashes it to the US stock 3.2.2 rom. It picked up wifi but couldn't connect for some reason - maybe different frequency?
Anyway since then I've installed one of the custom Roms here Team Tiamat Xoom Rom 2.2.2 and all is well now Got my Xoom back up and running with superaccess.
Thanks for all the info on this forum, great place for resource
Mind you, coming from a background with no experience with ADB, it was a bit mind boggling but I managed to get there in the end. Just a bit of feedback for those authors with the guides - maybe put a little subsection on the basics of how to get things prepared and up and running. This I think will help a lot of people who cannot sit for hours on end to trouble shoot something if it goes wrong. Most of the guides here are very useful and handy but at time I just kept saying to myself "wtf, what, where, huh?"

Schizophonic said:
Hello all, after a bit of self taught ADB and etc and understanding the mechanics how to successfully flash a Xoom, I managed to follow another guide from stratch (unlock oem, etc) and flashes it to the US stock 3.2.2 rom. It picked up wifi but couldn't connect for some reason - maybe different frequency?
Anyway since then I've installed one of the custom Roms here Team Tiamat Xoom Rom 2.2.2 and all is well now Got my Xoom back up and running with superaccess.
Thanks for all the info on this forum, great place for resource
Mind you, coming from a background with no experience with ADB, it was a bit mind boggling but I managed to get there in the end. Just a bit of feedback for those authors with the guides - maybe put a little subsection on the basics of how to get things prepared and up and running. This I think will help a lot of people who cannot sit for hours on end to trouble shoot something if it goes wrong. Most of the guides here are very useful and handy but at time I just kept saying to myself "wtf, what, where, huh?"
Click to expand...
Click to collapse
My guide, which is highlighted in the Xoom Heaven thread has a large section on setting up your adb files etc.
http://forum.xda-developers.com/showthread.php?t=1249798

Rooted 3.2 Xoom FAIL
Hi All,
Not the best way to join the boards but I am in deep....
I have a canadian wifi xoom on 3.2. I followed these instructions (How to root 3.2 on US WiFi & Verizon 3G XOOM! (Windows and Mac)) to root my xoom and was having issues with a wifi error.
I decided to use the Canadian boot.img file and when I rebooted the xoom got stuck on the moto logo and is no longer recognized by my computer.
I have tried resetting through the android recovery (I dont have anything 3rd party installed) but no luck. I am afraid that this thing is a total write off.
Any thoughts? Thanks
Blair

[Completed] [Q] HTC M8 Won't Switch On

This post doesn't seem to match others asked before.
I had a perfectly working rooted/rom'd HTC One (M8). Unfortunately, screen cracked so I sent it off to the insurer to sort. It came back looking great. However, I was now unable to access any of the internal storage. Everytime I tried to download a photo, voice clip or Mod Edit: removed mention of warez it would say 'unable to download', 'cannot save' or something along those lines.
I checked to see the device was still rooted. It was. Nevertheless, I perhaps in ignorance, ran through all the steps over again and spent 3.5 hrs doing so! I now have a wonderful adb file on my desktop and I was fiddling around doing fast reboots etc and trying to flash a customrom in the hope that this would fix the storage invisibility/lack of permissions. I tried fixing with busybox etc but I couldn't even install busybox as it didn't recognise that there was any internal storage whatsoever! I also could not load onto my storage (for the same reason!) the latest SuperSU zip to flash as a rom.
In the end, through fiddling about, I was able to find my old storage pack. It was all there and I located an old SuperSU from when I had previously rooted about 6 months ago (an old version now I assume). Flashed this and rebooted. I was still adb connected so ran a fastboot and chose to run the TeamWin Recovery Wipe (standard setting, not advanced).
When wiped, I tried to get my phone to turn back on thinking it would be factory reset and I could start again but now I literally cannot get my phone on!! It is plugged into the computer via USB (i've tried disconnecting it too) and no matter what I try I cannot get this phone to do anything now - it's just a black screen that doesn't look completely off if I look closely it looks like it is on somehow....? Tried holding down vol down and power - nothing. It has flatlined!
Any help PLEASE!!!!! ?????

Hi, thank you for using XDA Assist. The best place to get help is in your device's specific forum here, http://forum.xda-developers.com/htc-one-m8 To get help on your specific problem try asking here, http://forum.xda-developers.com/htc-one-m8/help/help-thread-htc-one-m8-questions-t2897783