Related
Hi everyone, looking for a little guidance.
Phone: Android G1 (Rogers Canada Dream) running Cyanogen 4.2.15.1, been running fine since 4.2.6.1
Removed SD card while it was on and it rebooted... when it restarted it showed no applications and said the SD card was inaccessible and required a format. After rebooting a few times with no success I bit the bullet and formatted it... all apps are gone except for the ones that are on that image for Cyanogen. I have no market app to download new apps and when I plug it into my PC and mount it I don't see it show up as a drive like it did so I have no way to get the apps back on.
Has anyone had this happen before? Phone still works but I need to get it back to a state where I can get access to the SD and install the market... Any suggestions appreciated!!
There is a thread on the HERO section of Modaco site called "no adb, no sd". I think the 1st post on the last page MIGHT help. There are adb commands you can run to see if the phone has randomly stopped accessing the SD. Worth a shot.
PM me if you have trouble finding the thread n I'll have a look when I'm at my laptop.
Sent from my HTC Hero using XDA App
I misunderstood I think.
So it is now showing an sd present? Have you tried formatting in a pc?
Tried reboot without the sd in, then insert once fully booted again?
Sent from my HTC Hero using XDA App
I remove the SD Card, formatted it in my PC put it back in the phone and I can store pics and vids on it and access them but cant see or access it from the PC when in the phone. I also have no file browser so I cant install any apps or even access the market icon is gone).
D RoiD said:
Hi there! I had posted on the forum with the G1 issue where my SD card seemed to have died.
http://forum.xda-developers.com/showthread.php?t=738105
I have since removed the SD card and reformatted it, I can store pics and vids and replay them so the card is fine. I tried letting it boot up then adding the SD card when booted, that caused it to reboot, same issue...
Not having access to the card, I cant install any apps or browse the SD to install from there... really sucks
I'd be willing to blow it away and restart too and install CyanogenMod-5.0.8 but I need some guidance.
Click to expand...
Click to collapse
I got your message pal....
Ok,.... So pictures and videos taken with your phone camera DO save to your SD?.... and you CAN access them on your phone OR if you put your SD into your PC/Lappy?... But not when trying to "mount SD"?
Or have I got that completely wrong?.... Did you put pics&vids onto it through your PC, and thats the only access you get to it?
ddotpatel said:
I got your message pal....
Ok,.... So pictures and videos taken with your phone camera DO save to your SD?.... and you CAN access them on your phone OR if you put your SD into your PC/Lappy?... But not when trying to "mount SD"?
Or have I got that completely wrong?.... Did you put pics&vids onto it through your PC, and thats the only access you get to it?
Click to expand...
Click to collapse
Pics taken DO save to me SD. I Can access them from a PC is I remove the SD and put it in the PC. Not when I plug the phone in via USB then tell it to mount.
I just did a low level format, same issue.
UPDATE: Just tried the Android System Recovery and Toggle USB-MS and it shows on my laptop now! Going to try the recovery backup now.
aha,... so its just a mounting issue, not that the hardware has turned itself off.
Once when using an older ROM (maybe Villain 10?) we had this same issue, not able to mount SD,... going into Settings --> Connect to PC --> and turning off Notify/ask me solved the problem.
I just partitionned it using:
parted /dev/block/mmcblk0
print (to verfiy we know what size card we are dealing with, the details should be straight forward)
rm 1
rm 2
mkpartfs primary fat32 0 7500
mkpartfs primary ext2 7500 7948
quit
upgrade_fs
reboot recovery
Then put CyanogenMod-5 For Dream/Magic on the SD and renamed it update.zip
I'm in Android System recovery now and just did a nandroid backup.
I should be able to WIPE then FLASH UPDATE IMAGE right?
D RoiD said:
I just partitionned it using:
parted /dev/block/mmcblk0
print (to verfiy we know what size card we are dealing with, the details should be straight forward)
rm 1
rm 2
mkpartfs primary fat32 0 7500
mkpartfs primary ext2 7500 7948
quit
upgrade_fs
reboot recovery
Then put CyanogenMod-5 For Dream/Magic on the SD and renamed it update.zip
I'm in Android System recovery now and just did a nandroid backup.
I should be able to WIPE then FLASH UPDATE IMAGE right?
Click to expand...
Click to collapse
Yes, if you have the ROM image on the SD Card (FAT32 partition), you can go flash the image.
akapoor said:
Yes, if you have the ROM image on the SD Card (FAT32 partition), you can go flash the image.
Click to expand...
Click to collapse
Stupid question but when I wipe will it delete my contacts as well?
I assume yes but...
D RoiD said:
Stupid question but when I wipe will it delete my contacts as well?
I assume yes but...
Click to expand...
Click to collapse
If your contacts are saved in the phone's memory, then yes. Any settings, apps, configurations that are stored on the phone will all be gone.
A wipe pretty much gives you the factory settings. (As if you just bought the phone) So you'll have to re-signin into your Google Account and let the Contacts Sync, etc..
EDIT: Depending on what you are flashing (flashing and wiping are two different things), you may not even need to wipe.
Hmmm I tried flash update image and got:
E: Cant open /sdcard/update.zip (No such file or directory)
When I mount it in system recovery I see the LOST.DIR and update.zip
D RoiD said:
Hmmm I tried flash update image and got:
E: Cant open /sdcard/update.zip (No such file or directory)
When I mount it in system recovery I see the LOST.DIR and update.zip
Click to expand...
Click to collapse
Try this:
-Confirm the Image-
1) Make sure you have the full image you are going to flash. (Compare MD5 Hashes and/or just redownload the image)
2) Make sure the image you are flashing is the in the ROOT directory of your SDCard. In other words, it shouldn't be in any folder.
-Flash the Image-
1) When in Recovery, choose to flash an image.
2) Depending on what recovery you have, you may have to select/find the Image you want to flash.
3) Flash the image
-Wipe (Depends)-
1) If you are coming from a different ROM base (ie anything -> cyan), you'll want to wipe.
2) After the phone successfully flashes the image, wipe the phone.
Reboot.
Let me know how it goes.
I pulled the new image from: Latest version: 5.0.8-DS - 06/19/2010
Download: http://cyanogen-upda...8-DS-signed.zip
but it says no such file or DIR... weird...
The only partition I can see on my PC to put it on is the main partition...
I just downloaded the file and renamed it update.zip
D RoiD said:
I pulled the new image from: Latest version: 5.0.8-DS - 06/19/2010
Download: http://cyanogen-upda...8-DS-signed.zip
but it says no such file or DIR... weird...
The only partition I can see on my PC to put it on is the main partition...
I just downloaded the file and renamed it update.zip
Click to expand...
Click to collapse
I just realized the main reason that you posted this topic. From what I am assuming, either:
a) Your SD Card reader is dead
b) The software isn't recognizing the SD Card reader.
Best bet at this point is to setup ADB (ADB For Dummies) and flash the image from your computer. It can get a slight bit complicated, but just slowly go through each step for installing ADB.
Once ADB is set up, you can flash the image from the computer.
akapoor said:
I just realized the main reason that you posted this topic. From what I am assuming, either:
a) Your SD Card reader is dead
b) The software isn't recognizing the SD Card reader.
Best bet at this point is to setup ADB (ADB For Dummies) and flash the image from your computer. It can get a slight bit complicated, but just slowly go through each step for installing ADB.
Once ADB is set up, you can flash the image from the computer.
Click to expand...
Click to collapse
The SD card reader in my phone? It has to work if I can read an write to it ( tested photos and videos) and in recovery I was able to make a backup.
If its the software I need to flash it then right? ADB does make me nervous as I only used it once... I just tried using the terminal emulator on the phone to flash a recovery image I had made while back:
cd /sdcard
flash_image recovery /sdcard/recovery-backup.img
and got the message "error writing recovery: Permission denied"
D RoiD said:
If its the software I need to flash it then right? ADB does make me nervous as I only used it once... I just tried using the terminal emulator on the phone to flash a recovery image I had made while back:
cd /sdcard
flash_image recovery /sdcard/recovery-backup.img
and got the message "error writing recovery: Permission denied"
Click to expand...
Click to collapse
If you can view the pictures that you saved on the SD card from the phone, then both the software and hardware are functioning correctly.
Regarding the permission denied:
1) What happens if you "su - " in terminal?
2) First try one(1) ^ and then try to reinstate the permissions. (In recovery, go to console and type : fix_permissions)
Not sure otherwise.
akapoor said:
If you can view the pictures that you saved on the SD card from the phone, then both the software and hardware are functioning correctly.
Regarding the permission denied:
1) What happens if you "su - " in terminal?
2) First try one(1) ^ and then try to reinstate the permissions. (In recovery, go to console and type : fix_permissions)
Not sure otherwise.
Click to expand...
Click to collapse
Ok I did a wipe and now I see the SD when mounted on the PC with the phone on.
I have my market icon back so I can reinstall my crap.
I'll leave it as is for a bit but appreciate everyones input!!!
Hi All.
I'm new to this and trying to install my first rom (aiming for cynagenmod 7- it has the language support i need, or so they say)
I rooted my phone and followed a yourtube video titled "How To Install CyanogenMod 7 Nightly on T-Mobile G2x after Nandroid Backup"
When i get to the part where i need to install zip from sd card, i can't find the file. I went back and copied the zip file into a few different folders, and although i can locate the folders, it tells me that the file cannot be found.
How do i get around this? Your help is much appreciated.
Maholly said:
Hi All.
I'm new to this and trying to install my first rom (aiming for cynagenmod 7- it has the language support i need, or so they say)
I rooted my phone and followed a yourtube video titled "How To Install CyanogenMod 7 Nightly on T-Mobile G2x after Nandroid Backup"
When i get to the part where i need to install zip from sd card, i can't find the file. I went back and copied the zip file into a few different folders, and although i can locate the folders, it tells me that the file cannot be found.
How do i get around this? Your help is much appreciated.
Click to expand...
Click to collapse
How did you download it? Through rom manager or from the phones xda app, browser? Look in folders with xda or rom manager?? Next time just copy and paste it to the root of the sdcard, not in a folder.
Sent from my LG-P999 using xda premium
Downloaded it on a computer and then copied it to sd card
and you can't find where you put it? did you place it in a certain folder already created... you can plug your phone in to pc then enter recovery mode, go to storage and mounts at the bottom select mount usb then copy the zip to your sdcard in no folders.
When i try to do that t tells me unable to write to ums lunfile (no such file or directory).
From recovery mode there are some folders i can't see when i browse the folders on the computer when the phone is booted up normally - and vice versa. Is this an indicaiton of a problem?
Silly question: do you actually have an SD card inserted in your phone? If so, what did you use to format it?
i do have an sd, and i actually didn't format it. should i format? if so, what is the best way?
Your help is much appreciated
Maholly said:
i do have an sd, and i actually didn't format it. should i format? if so, what is the best way?
Your help is much appreciated
Click to expand...
Click to collapse
Did you try, while in recovery, taking the back off your phone, pop out the sd card, wait 1 second, then pop it back in?
Stupid question, but it's a mistake some beginners make, but did you unzip it by any chance? That could be a reason CWM isn't seeing it. Once you DL the ROM you need to leave it untouched. Then place on SD.
After that in CWM go to choose zip from sd.
And you attained CWM via NVFlash correct?
buru898 said:
Did you try, while in recovery, taking the back off your phone, pop out the sd card, wait 1 second, then pop it back in?
Click to expand...
Click to collapse
Yes, tried that and still no luck
mackster248 said:
Stupid question, but it's a mistake some beginners make, but did you unzip it by any chance? That could be a reason CWM isn't seeing it. Once you DL the ROM you need to leave it untouched. Then place on SD.
After that in CWM go to choose zip from sd.
And you attained CWM via NVFlash correct?
Click to expand...
Click to collapse
no, didn't unzip, left it as cm_p999_full-201.zip
and yes, did get the CWM via NVFlash
Maybe you accidentally copied it to internal memory instead of the sdcard. You can check in cwm under internal sdcard I believe is what it is called.
When you connect the phone through USB it mounts both internal and the sdcard.
Sent from my LG-P999 using xda premium
My file explorer sees it in both the root and the folder I created in the root - both can't be seen in recovery mode.
Should i list the directories i see in both views?
In cwm are you selecting install zip from sdcard or install update from sdcard
Sent from my LG-P999 using xda premium
I ask it to install zip from sd and not update
Maholly said:
My file explorer sees it in both the root and the folder I created in the root - both can't be seen in recovery mode.
Should i list the directories i see in both views?
Click to expand...
Click to collapse
you may have put it on the "internal sd card" instead of external sd card, however this is not an issue if you flash CWM 5.0.2.0 or later, it has an option to install zip from internal sd and external. i renamed my external sd card to avoid future confusion (otherwise i see two "removable disks" when i plug my phone into my computer)
Check your file names on your SD card. Check what you see listed in Recovery. If you see differing file names, then you're accessing the wrong memory.
I'm going to assume you tried booting with the physical buttons. Try booting with CWM which should give you a blue menu.
i did try to boot both ways and both times i did not find it... for the millionth time i took the sd card out and put it back in and rebooted using cwm, and funny enough, it found the direcotry... and yaaaaaaaaaaaaaaay, cynagenmod7 is my new rom
thanks for all your help, support and commiseration... really, much appreciated. i do ve a few more issues that i have to research now... again, external sd not found though... will probably solicit more help
again, thanks
Facing the same problemm
Hello,
new to this rooting and stuff.. I rooted the rom , installed clockworkmod... Now the rom is just not getting detected... Did it a million times.. What to do.. facing exactly the same problems.. I did all that was mentioned... The file is unzipped only card is inserted, using the cmw reboot and stuff itself so no tension.. plzz let me no what to do... stuck here since hours.. !!
hippoalways said:
Hello,
new to this rooting and stuff.. I rooted the rom , installed clockworkmod... Now the rom is just not getting detected... Did it a million times.. What to do.. facing exactly the same problems.. I did all that was mentioned... The file is unzipped only card is inserted, using the cmw reboot and stuff itself so no tension.. plzz let me no what to do... stuck here since hours.. !!
Click to expand...
Click to collapse
Don't unzip the file. When you flash anything via clockwork, it flashes using .zip files.
Hello,
I rooted my tf101, all went well. Put clockworkmod recovery on it and still no problems. Now I wiped all partitions by mistake of my tf101. The only thing left is the recovery image (cwr) but if i try adb tool to push a file on the system it says the system is readonly. If i try nvflash tool is also says error onable to write and it disconnect the tf101.
Can any body help me, or do i have to put it back to repair
thanks Ernst
Well, if you have a microSD card, and a CWM that can read from it, you could just hook the card up to your PC (using a phone with microsd slot, or a cardreader, etc) and place the new image on the card.
Also, have you tried running 'adb root' to make sure ADB is running as root?
@Goatshocker
I tryed to insert a microSD card, but cwr does not recognize it, at least it does not appear in the menu structure.
Also tryed adb root, it sayed hat it is already in root.
ernst99999 said:
@Goatshocker
I tryed to insert a microSD card, but cwr does not recognize it, at least it does not appear in the menu structure.
Also tryed adb root, it sayed hat it is already in root.
Click to expand...
Click to collapse
If you are using cwm 5.5.0.4, go to the following link.
http://forum.xda-developers.com/showthread.php?p=23256536
@kokopopz
I have indeed version 5.5.04, have read the tread you mentioned, but no solution. My problem is that if i try to push a file to the TF than it says "read-only file-system". Tryed in cwr to fix permisions, but no help.
Problem stays the same.
@kokopopz Thanks for your link.
I Found the solution !!!! My TF is UNBricked. YES YES YES.
For the record: "adb push rom.zip /data/media/rom.zip" will do the trick, after that reboot to cwr and do install zip from sdcard.
Hi everyone,
I have a Galaxy Tab 2 7.0 (P3100) and I have rooted it and installed CWM so I could install the latest CM release. But when I try to install the CM zip file, it says "some symlinks failed". Now my tablet won't boot, the splash screen with "Samsung Galaxy Tab 2" keeps on forever. But I still have access to CWM and the Download mode so I think everything's not lost yet
Here are the exact steps I did:
- Uploaded the CM image (cm-10-20121213-NIGHTLY-p3100.zip), the gapps zip and the root zip to the tablet.
- Installed heimdall on my computer, with the correct drivers.
- Flashed CWM on the tablet.
- Installed the root zip on the tablet using CWM.
- Booted the tablet again just to make sure rooting was enabled (yes, it was).
- Opened CWM again, wiped data, wiped cache.
- Installed CM image:
--- Error: some symlinks failed (status 7)
- Installed the gapps zip file (worked)
- Formatted /system
- Installed CM image:
--- Same error: some symlinks failed (status 7)
I wanted to try another CM images, maybe that one is broken, I don't know, but now I cannot upload more files to the tabled internal SD card. I can't mount it anymore on my computer because the tablet won't boot. I tried using an external SD card (from another Android phone I have) but CWM says "Cannot mount /external_sd" when I try to mount it.
Can anyone help me? I want to flash the latest CM on my tablet.
Thanks!
This seems to me like either a broken recovery or maybe a corrupt download. What version of CM are you trying to flash? Also, what version of CWM are you using and where did you find it?
Posted from my Fascinate using XDA Premium
Yeah, I also think the download was corrupt. I tried flashing cm-10-20121213-NIGHTLY-p3100.zip (the latest one on the day I flashed) and my CWM version is 6.0.1.1. I downloaded it from ClockworkMod official website, they say that is the latest version for my tablet model.
I believe CWM is working and that the image is corrupt, but I can't find a way to flash another CM image because I don't know how to put another file inside the tablet, or how to flash an image from my computer to the tablet. Can I use something like heimdall to flash a CM to my tablet? Can I upload an image to the tablet so I can use CWM to install it? "adb push" doesn't work, it doesn't detect my device in CWM mode. Do I need some working/stock Android image on the tablet so I can flash CM over? Or it will work no matter what's installed (given that the download is not corrupt)?
Thanks!
cristiandeives said:
Yeah, I also think the download was corrupt. I tried flashing cm-10-20121213-NIGHTLY-p3100.zip (the latest one on the day I flashed) and my CWM version is 6.0.1.1. I downloaded it from ClockworkMod official website, they say that is the latest version for my tablet model.
I believe CWM is working and that the image is corrupt, but I can't find a way to flash another CM image because I don't know how to put another file inside the tablet, or how to flash an image from my computer to the tablet. Can I use something like heimdall to flash a CM to my tablet? Can I upload an image to the tablet so I can use CWM to install it? "adb push" doesn't work, it doesn't detect my device in CWM mode. Do I need some working/stock Android image on the tablet so I can flash CM over? Or it will work no matter what's installed (given that the download is not corrupt)?
Thanks!
Click to expand...
Click to collapse
Please tell me you made a backup after rooting and before modding?
If you didn't (which it sounds like), BAD CRISTIAN!!! But this will make you learn to do it from now on, huh?
Which leaves you only two options, both include using a computer to get a ROM zip to the tab...
1- connect tab to computer in recovery with usb cable and download a new copy to SD card via computer.
2 - remove SD card from tab, place in computer card reader, and download a new copy to SD card via computer.
LeftyGR said:
Please tell me you made a backup after rooting and before modding?
If you didn't (which it sounds like), BAD CRISTIAN!!! But this will make you learn to do it from now on, huh?
Click to expand...
Click to collapse
I didn't make a backup :crying:
Yes, now I learnt, I will always make a backup from now on...
LeftyGR said:
1- connect tab to computer in recovery with usb cable and download a new copy to SD card via computer.
Click to expand...
Click to collapse
How exactly do I download a new copy of the image to the SD card? When I plug the tablet to the computer, I can't access its files. It used to show me the files when the Android system booted, but on Recovery mode it won't display them, the filesystem isn't mounted. Should I do anything special? Should I use another CWM version?
LeftyGR said:
2 - remove SD card from tab, place in computer card reader, and download a new copy to SD card via computer.
Click to expand...
Click to collapse
I tried that, but it seems I cannot mount the external SD card using CWM. When I hit "Mount external SD Card", it says "Cannot mount /external_sd". The SD card works fine though, I use it on another phone and on my computer... Is this a CWM problem? =/
Thanks!
cristiandeives said:
I didn't make a backup :crying:
Yes, now I learnt, I will always make a backup from now on...
Click to expand...
Click to collapse
Good man.
How exactly do I download a new copy of the image to the SD card? When I plug the tablet to the computer, I can't access its files. It used to show me the files when the Android system booted, but on Recovery mode it won't display them, the filesystem isn't mounted. Should I do anything special? Should I use another CWM version?
Click to expand...
Click to collapse
Pull the ext sd card out of the tab and put it into a card reader on a computer using the adapter the micro sd card [should have] come with.
I tried that, but it seems I cannot mount the external SD card using CWM. When I hit "Mount external SD Card", it says "Cannot mount /external_sd". The SD card works fine though, I use it on another phone and on my computer... Is this a CWM problem? =/
Click to expand...
Click to collapse
Possibly... However if you can mount your internal sd card, you should be able to place the zip on there. I don't usually suggest using internal, but if that's what you gotta do....
I found out why I couldn't mount my external SD card with CWM: I had to format it with FAT32! I don't know what filesystem there was before, the SD card I have was used by an old Éclair phone. I still couldn't install others CM 10 images (I really don't know why), but I managed to install CM 9 and the brand new CM 10.1.
Thanks, guys! =)
cristiandeives said:
I found out why I couldn't mount my external SD card with CWM: I had to format it with FAT32! I don't know what filesystem there was before, the SD card I have was used by an old Éclair phone. I still couldn't install others CM 10 images (I really don't know why), but I managed to install CM 9 and the brand new CM 10.1.
Thanks, guys! =)
Click to expand...
Click to collapse
Awsome. Thank you for providing your solution!!
Ok, I have a problem very similar to threads Ive found by with some minor differences. Hoping for some answers to this nightmare....
I have an AT&T One X - unlocked, rooted and flashed. I was running Viper XL and using TWRP recovery 2.3.10. Yesterday, I decided to flash a Liquidsmooth ROM using flash image gui......everything went fine with install until it hung on liquidsmooth boot screen, for an hour. Figuring there was an install error, I rebooted into twrp to do a recovery. Recovered back to Viper XL and was thrown into bootloop - HTC screen/Viper Boot...over and over again. Finally decided to stop before I destroyed anything.....so here's where I am now. The phone has been reset, sd card was wiped but I can still boot into TWRP without a problem. However, now there is no backup or ROM zip on this SD card.
So my guess is that first and foremost I need to get a ROM on that SD card, however (I'm on a Mac) when I plug the phone in, I get a "No Android Device Connected" in the dialog and when trying to mount SD card via TWRP, the "Mount SD Card" box wont tick.
If I view the log file in TWRP I see a lot of 'could not mount SD card' errors.....
I don't want to keep screwing with it and make things worse. Considering this has happened with both CM10 and LiquidSmooth, my guess is I should just stick with Viper for now, so any help getting this back on here would be hugely appreciated! I have no access to a PC, only a mac.....
Boot screen info:
TAMPERED - UNLOCKED
EVITA PVT SHIP S-ON RL
HBOOT-1.14.0002
RADIO-0,19as.32.09.11_2
OpenDSP-v29.1.0.45.0622
eMMC-boot
If you're on Hboot 1.14 and are S-On you need to manually "flashboot flash boot boot.img" in fastboot from the bootloader menu whenever you flash a new ROM. Go to the bootloader and click "fastboot" then plug in your USB connected to the computer and it should now say "fastboot usb" assuming your drivers are installed (it might install them after you plug your phone in). Now you can flash the boot.img from the rom zip manually via the fastboot command window.
EDIT: Sorry didn't realize you were on Mac. I would first figure out how to mount the SD card as removable storage and not an Android device. You may have to format it as a file system first. At least that's what I had to do when this happened to me when I first flashed but i'm on Windows. I should of read your post more thoroughly.
So this would be done from the terminal? I was able to boot onto fastboot, connected USB cable and now show fastbootusb. I downloaded the ViperXL rom again, so I should extract the boot.img and flash this via terminal?
Are the commands the same on a mac? And how do I then get the rom onto the SD card?
Am I correct in my assumption that this is the answer? http://forum.xda-developers.com/showthread.php?t=1693372
originalseven said:
So this would be done from the terminal? I was able to boot onto fastboot, connected USB cable and now show fastbootusb. I downloaded the ViperXL rom again, so I should extract the boot.img and flash this via terminal?
Are the commands the same on a mac? And how do I then get the rom onto the SD card?
Click to expand...
Click to collapse
I don't want to give you too much advice since I don't have a mac but I would assume they're the same except you need to have fastboot/adb on your computer but since the ones I have are .EXE files they're not going to work on OSX. However, If fastboot usb came up the computer is reading the phone so you may be able to open the SD card as removable storage on you computer thats how it is on Windows. So once you do that you can just move the ROM zip onto the card. But, like I said you're going to need to figure out a way to flash the boot.img separately or else you won't be able to boot into the ROM when it's installed (you'll just bootloop). You're going to have to do that with every new ROM you flash if you're still S-On.
Wish I can be more help but i'm not that versed in OSX.
you can use [APP] Flash Image GUI - Flash Kernels and Recoveries from normal Android mode! to flash boot.img fine before flashing the rom. it will search the rom zip for the boot.img and flash it. you can also flash recovery using the app also. some roms place boot.img in other locations other then the root of the zip in which case you might have trouble selecting the whole zip, but you can just extract the boot.img and flash it fine.
c0d_fish said:
I don't want to give you too much advice since I don't have a mac but I would assume they're the same except you need to have fastboot/adb on your computer but since the ones I have are .EXE files they're not going to work on OSX. However, If fastboot usb came up the computer is reading the phone so you may be able to open the SD card as removable storage on you computer thats how it is on Windows. So once you do that you can just move the ROM zip onto the card. But, like I said you're going to need to figure out a way to flash the boot.img separately or else you won't be able to boot into the ROM when it's installed (you'll just bootloop). You're going to have to do that with every new ROM you flash if you're still S-On.
Wish I can be more help but i'm not that versed in OSX.
Click to expand...
Click to collapse
No problem - thanks for the help you can offer. It seems my bigger problem is getting a ROM onto the SD card - Ive read several similar threads and from what I can tell, doing a factory reset through TWRP means I need to reformat the SD card, which is why it wont mount. Does this sound reasonable?
And if so, is it as simply as "Wipe external storage - SD CARD" in TWRP?
originalseven said:
Am I correct in my assumption that this is the answer? http://forum.xda-developers.com/showthread.php?t=1693372
Click to expand...
Click to collapse
No, this is for the ONE S
you are on ONE X
Try this to get your SD Card working again:
http://forum.xda-developers.com/showthread.php?t=1942519
now you can Mount the SD in TWRP
then put the ROM on the SD and install it with TWRP.
Then this for the boot.img:
http://forum.xda-developers.com/showthread.php?t=2182207
SORRY, did't read you are on MAC, you can try this to get fastboot on the MAC
http://forum.xda-developers.com/showthread.php?t=1917237
Ghostrider said:
No, this is for the ONE S
you are on ONE X
Try this to get your SD Card working again:
http://forum.xda-developers.com/showthread.php?t=1942519
now you can Mount the SD in TWRP
then put the ROM on the SD and install it with TWRP.
Then this for the boot.img:
http://forum.xda-developers.com/showthread.php?t=2182207
Click to expand...
Click to collapse
He has OSX so I don't believe the exact methods of these posts will work but it will point him in the right direction.
---------- Post added at 02:24 PM ---------- Previous post was at 02:20 PM ----------
originalseven said:
No problem - thanks for the help you can offer. It seems my bigger problem is getting a ROM onto the SD card - Ive read several similar threads and from what I can tell, doing a factory reset through TWRP means I need to reformat the SD card, which is why it wont mount. Does this sound reasonable?
And if so, is it as simply as "Wipe external storage - SD CARD" in TWRP?
Click to expand...
Click to collapse
And yes you will have to reformat the SD card I don't know how to go about doing it OSX though. I'm sure a google search will help. The method should be the same for any type SD card plugged into OSX. But remember flashing the boot.img will be the other issue.
c0d_fish said:
I don't want to give you too much advice since I don't have a mac but I would assume they're the same except you need to have fastboot/adb on your computer but since the ones I have are .EXE files they're not going to work on OSX. However, If fastboot usb came up the computer is reading the phone so you may be able to open the SD card as removable storage on you computer thats how it is on Windows. So once you do that you can just move the ROM zip onto the card. But, like I said you're going to need to figure out a way to flash the boot.img separately or else you won't be able to boot into the ROM when it's installed (you'll just bootloop). You're going to have to do that with every new ROM you flash if you're still S-On.
Wish I can be more help but i'm not that versed in OSX.
Click to expand...
Click to collapse
Ghostrider said:
No, this is for the ONE S
you are on ONE X
Try this to get your SD Card working again:
http://forum.xda-developers.com/showthread.php?t=1942519
now you can Mount the SD in TWRP
then put the ROM on the SD and install it with TWRP.
Then this for the boot.img:
http://forum.xda-developers.com/showthread.php?t=2182207
SORRY, did't read you are on MAC, you can try this to get fastboot on the MAC
http://forum.xda-developers.com/showthread.php?t=1917237
Click to expand...
Click to collapse
Yeah those are .exe files. No go on this machine. Similar method for the mac anywhere?
yes i saw it at the Moment, and put something in that maybe work.
this here:
http://forum.xda-developers.com/showthread.php?t=1917237
doing a factory reset in hboot corrupts your sdcard.
once you get adb/fastboot working try running "fastboot erase cache" that clears out the part of cache where the settings for twrp reside, that is why when you format cache in twrp you always see 16MB when you fastboot erase cache it goes to 0MB but for recovery to store it's settings you need to rewipe cache and dalvik in twrp.
Ghostrider said:
yes i saw it at the Moment, and put something in that maybe work.
this here:
http://forum.xda-developers.com/showthread.php?t=1917237
Click to expand...
Click to collapse
This is your answer this man saved you some headaches I think.
Yes, Ghostrider helped you alot give him Thanks, but also do my recommendation also each time you flash recovery.
Ghostrider said:
yes i saw it at the Moment, and put something in that maybe work.
this here:
http://forum.xda-developers.com/showthread.php?t=1917237
Click to expand...
Click to collapse
I think my inner idiot is kicking in. I believe I already have fastboot installed - perhaps Im missing something. I went through this process before and have all of these same files still on my desktop. I'm able to boot my phone into the bootscreen (white screen) and TWRP without problems....the only issue I have right now is my SD card and getting a ROM pushed to it. I've gotten two conflicting bits of advice that im reluctant to try....one of them states I should just boot into TWRP and do a "Wipe external storage" and the other one says I should format it using disk utility in OSX. When I boot into TWRP and hit "mount", Im given four options, mount system, mount data unmount cache and mount sd card...the ONLY one I cant select is mount sd card.
DvineLord said:
doing a factory reset in hboot corrupts your sdcard
Click to expand...
Click to collapse
oh yaa, this one i did once
and never again
---------- Post added at 08:43 PM ---------- Previous post was at 08:38 PM ----------
your SD Card is maybe not there when you have done an factory reset in hboot.
then you Need to Format it in stock recovery.
like in the first link from me
originalseven said:
I think my inner idiot is kicking in. I believe I already have fastboot installed - perhaps Im missing something. I went through this process before and have all of these same files still on my desktop. I'm able to boot my phone into the bootscreen (white screen) and TWRP without problems....the only issue I have right now is my SD card and getting a ROM pushed to it. I've gotten two conflicting bits of advice that im reluctant to try....one of them states I should just boot into TWRP and do a "Wipe external storage" and the other one says I should format it using disk utility in OSX. When I boot into TWRP and hit "mount", Im given four options, mount system, mount data unmount cache and mount sd card...the ONLY one I cant select is mount sd card.
Click to expand...
Click to collapse
Not sure what you should do really this happened to me but I forgot what I did. I ended up just formatting the card with the disk utility in Windows but I don't remember if I had to re-flash the recovery or not afterwards.
So I should just use this method again, regardless of whether I may have done it before, correct? This will format in stock recovery?
In the APK folder, there are two fastboot files, one 'fastboot' and one 'fastboot-mac' - i want the -mac one obviously, right?
originalseven said:
So I should just use this method again, regardless of whether I may have done it before, correct? This will format in stock recovery?
In the APK folder, there are two fastboot files, one 'fastboot' and one 'fastboot-mac' - i want the -mac one obviously, right?
Click to expand...
Click to collapse
That page is no longer found but yeah seems like that would be the one to use.
I can't give you much advices on a MAC, I don't use one.
but if you have working fastboot and ADB this could workout.
Ghostrider said:
yes i saw it at the Moment, and put something in that maybe work.
this here:
http://forum.xda-developers.com/showthread.php?t=1917237
Click to expand...
Click to collapse
Ghostrider said:
I can't give you much advices on a MAC, I don't use one.
but if you have working fastboot and ADB this could workout.
Click to expand...
Click to collapse
Ok - I believe that fastboot is working correctly. I get this output from terminal
Mac-Pro:android originalseven$ ./fastboot-mac devices
HT29SW306500 fastboot
Mac-Pro:android originalseven$
So it's showing a connection between phone and computer.......
The next logical step would be....format the SD card?
Thank you guys sooooo much for the help!!!