Is there any way to boot WiFi reception on cm7? I love the Rom, but WiFi is a bit sketchy. I'm using the stock radio.
I switch to stock and its way better!
HTC Inspire 4g on Cm7
I've tried multiple radios and multiple ROMs (including stock) but I haven't found much difference in wifi signal strength. In theory, a ROM should not impact signal strength since this is at the radio level. However some ROMs might display bars differently for a given decibel level. Therefore, you should always use decibels (not bars) when comparing wifi strength, using a program like WiFi Scanner or Network Signal Info. ROM A may display an 80 dBm signal as 4 bars, where ROM B displays the same signal as 3 bars.
Is it normal for the Mbps of y connection to go u and down so much? Seems like it wants to drop to 1 MBPS and hang there. This causes my internet browser to be very sluggish. Am I missing something?
I've noticed it also in my anecdotal experience:
At a far end of my house with CM7 and stock radio, I get sketchy Wifi reception (phone flips between wireless and wifi.) Can't surf without disruptions as wifi connection gets dropped and have to wait for the phone to get on 3G.
With stock ROM and stock radio, I can surf without any issues on wifi at the same location.
Theoretically, ROM shouldn't make any diff, but I'm seeing otherwise in practice.
Related
I've always been curious about this. When I have 2 bars does that mean I have a bad data signal or a bad voice/text signal? Or is it both?
Thanks for any info
Sent from my ADR6400L using das bamf 1.6.3 remix with imoseyon's lean 2.5 kernel
It seems like it only shows bars for 1x. If I disable 1x on my phone, I have no bars, and the signal strength says -120dBm. I still have 3G since data works though.
If you use sensorly you can probably see the signal strength for 3G. Mine says -81 dBm with 1x off.
A little O/T but I have found that the signal bar strength bars to be kinda misleading. In BAMF 1.6.3 I was getting 6 bars almost all the time. In CM7 I get 1 or 2, but I'm still at about -84dBm.
Actually both if you notice when you attempt a Data connection (this is on a sense rom) the bars will show your EV-DO connection and then when the data transmission stops its goes back to 1X. Now on CM7 it always shows EV-DO until you get a call in then shows 1X
I work in a downtown Dallas office building and am running radio 12.39a.60.19u_26.06.06.30_M on AOSPX ICS rom. My signal strength is at -89 dBm 12 asu, yet I have a difficult time getting a consistent transfer rate from my phone while at my desk. The data package also switches between "3G" and "H" occasionally. My battery life is okay, but Speedtest.net is reporting a download speed of anywhere between 512 and 781 kbps and upload speed of 739 and 1038 kbps. It's very inconsistent and sporadic.
echodun said:
I work in a downtown Dallas office building and am running radio 12.39a.60.19u_26.06.06.30_M on AOSPX ICS rom. My signal strength is at -89 dBm 12 asu, yet I have a difficult time getting a consistent transfer rate from my phone while at my desk. The data package also switches between "3G" and "H" occasionally. My battery life is okay, but Speedtest.net is reporting a download speed of anywhere between 512 and 781 kbps and upload speed of 739 and 1038 kbps. It's very inconsistent and sporadic.
Click to expand...
Click to collapse
Bad signal, interference, los to tower issues, a lot of people on same tower during peak usage. Pick your poison.
How does it perform outside the building? If it performs properly then it's just any or all of the mentioned causes. If it's still bad, then we can work on that. I personally get no signal for the 9hrs im inside my building at work, walk outside, 3g with full bars lol.
There are little tweaks you can do, keep phone in upright position (creates antenna alignment'ish to the tower), you can remove the case as well, (each layer the signal has to go through reduces it's strength)
I figured as much
And it does seem to work fine outside of the bldg. The only problem is that most of my coworkers' devices work fine in the bldg. They are on different networks. I'm on AT&T.
echodun said:
And it does seem to work fine outside of the bldg. The only problem is that most of my coworkers' devices work fine in the bldg. They are on different networks. I'm on AT&T.
Click to expand...
Click to collapse
You are comparing apples and oranges. My company has a repeater installed in it for verizon, so all the verizon people get perfect signal. Something similar may be at your place. either way, i dont see a problem that can be fixed on your end, other than switching networks :/
On Synergy 1.7 and imoseyon kernel 0.1.
I play poker for a living in Atlantic City so I spend a lot of time in a hotel room on high floors. Signal is either medium, low or very low depending on the room. I notice a lot that if I make the phone 3g I get 2 to 4 bars, and internet works. When I turn on LTE, signal drops suddenly to 0 or 1 bar, and internet is slower than 3g. A lot of the time it will auto switch to 3g. Anything I can do, and are there any legit apps or hardware to boost signal?
sfetaz said:
On Synergy 1.7 and imoseyon kernel 0.1.
I play poker for a living in Atlantic City so I spend a lot of time in a hotel room on high floors. Signal is either medium, low or very low depending on the room. I notice a lot that if I make the phone 3g I get 2 to 4 bars, and internet works. When I turn on LTE, signal drops suddenly to 0 or 1 bar, and internet is slower than 3g. A lot of the time it will auto switch to 3g. Anything I can do, and are there any legit apps or hardware to boosr signal?
Click to expand...
Click to collapse
Yeah pay for wifi, you are in a hotel lol. Most likely the hotel (if a big one on the strip) has a signal amplifier for 3G. LTE is probably too new for them to have one installed yet. That's your difference.
Sent from my Synergy GS3
$12 to $15 isnt worth speeds slower than 4g. Hell if 3g can do better than 384k speeds then the wifi is slower than 3g. Really wish legit signal boosters exist.
sfetaz said:
On Synergy 1.7 and imoseyon kernel 0.1.
I play poker for a living in Atlantic City so I spend a lot of time in a hotel room on high floors. Signal is either medium, low or very low depending on the room. I notice a lot that if I make the phone 3g I get 2 to 4 bars, and internet works. When I turn on LTE, signal drops suddenly to 0 or 1 bar, and internet is slower than 3g. A lot of the time it will auto switch to 3g. Anything I can do, and are there any legit apps or hardware to boost signal?
Click to expand...
Click to collapse
Might just be in a rough area for 4G or because your inside the signal is weaker. Same thing happens to me at work, as soon as i walk inside the signal drops a lot
as my signature shows (may change tho) that I'm running CodeName android saga v.3.5 atm but I got some signal strength issues which I didn't have with my previous -Fallout Evolution v5.0-
what effects does a ROM have over the wifi signal strength and is it fixable?
I used to have about full signal bar in my room with fallout v5 but now I got a mere 1-3 bars.
note that I compared both ROM's signal strength on same distances from my access point to be fair.
Thanks in advance.
Yes, ROM can affect WiFi signal strength - it has the WiFi driver.
can anyone provide more information, if it can be modded for example.
tarekmoha said:
can anyone provide more information, if it can be modded for example.
Click to expand...
Click to collapse
Its WiFi perception limits can be lowered at kernel level but this will cost some battery life.
The other way (at least on Sense ROMs) there is an option in the advanced WiFi Settings to use weaker signals. Do not remember does it exist on AOSP though
I notice thay if i turn off LTE, I get a stronger cell signal on H+. Would I get better battery life by turning LTE off when im using home wifi? I dont lose the signal on LTE or HSPA, but the signal is a bar or two higher normally on HSPA
I believe LTE gives better battery life pretty close to/on part with WiFi levels. Future LTE modems coming out are going to be more battery friendly than WiFi.
LTE>3G as long as there is strong signal if not stick to 3G I guess.
The number of bars is arbitrarily set by the rom for a given dBm and can't really be compared between 3G and LTE. LTE will still function well at lower signal strength than 3G.