Related
!!This is ONLY for Toshiba Folio 100!!!
This Mod is based on Tnt Stock image for Viewsonic G tablet and now working on our Folio 100.
V0.4 EDITION BREAKS QUADRANT SCORE OF 3000+ with fs optimization patch
You can also follow updates on Twitter now: Dexter Picard (DexterPicard) on Twitter or
me a Red bull, and you're sure i stay up working on this mod or you can visit my new homepage at Dexter's mods
Folio100 Wiki pages available here and here
Other non-FolioMod , but folio100 threads Kernel&Tweaks & General questions thread
Please use these for non-FolioMod questions, like screen,battery etc...
Installation Instructions:
ALWAYS HAVE CHARGER CONNECTED WHEN UPDATING A FIRMWARE
Download FolioTntMod v0.4
Extract contents to a folder and follow instructions below or Readme inside zip file.
copy the update.zip to a sdcard, and insert sdcard into folio.
Enter "Recovery menu" when folio is just turned on and press (POWER) once and (VOL up) next.
press (VOL up) Factory reset or system update.
press(VOL down) to continue to system update.
press (VOL up) to confirm system update.
during installation progress bar will show har far it is.
folio will reboot after installation.
if you need to wipe, repeat the steps above without sdcard inserted, and you get into recovery menu. Press "HOME" button to see menu and choose "factory reset".
Rollback to original stock rom:Download Folio stock image for full restore to stock rom
extract zip to a folder, and from here follow steps 1 - 9 above, to install the update.zip .
This image is for rollback purpose, if you do not want the mod edition, here is the way back to stock rom.
Remember to run a factory reset before or after this stock rom install..
Old releases
Mirror 1 - FolioMod v0.3a Nvidia based
Mirror 1 - FolioMod v0.2a Nvidia based
Patches
IMPORTANT PATCH 02-01-2011 - Fixes serious fs optimization problem download here
This patch will automatically enable the fs optimization in v0.4 as well.
Rename zip file to update.zip and install using recovery menu.
Known issues (also reported by users)
- Wifi seems to work in inverse on v0.4, you need to force "always enabled" in avanced settings, to have it turn off when not used
- all - Cannot use "clear data" in "manage application".
- Vending(Market app) has wrong icons (stars looks wrong)
CHANGELOG
v0.4a
Fixes serious problem with fs optimization , if a crash occur.
Fixes wrong sensor library used.
v0.4
Wifi adhoc/regular mode possible with FolioWidget (installed seperately)
Games orientation fix by weeds2000 (tested with Asphalt5,3d tilt as example)
Nvidia performance pack v2 (originally built by rothnic/xda-forum)
(Quadrant 3D performance increase is +400 compared to previous runs)
filesystem optimization addon solution
* put "update-enablefsoptimize.zip" on sdcard, rename to "update.zip"
and run through recovery as normally with update.zip to enable optimization.
DO NOT EXTRACT "update-enablefsoptimize.zip"!! JUST RENAME IT.
(Quadrant I/O performance is adding another 700+ points to score)
Custom kernel included for CIFS support
v0.3a
Audio missing with tnt drivers, so its using folio drivers now.
v0.3
Based of latest TNT release 1.1-3338
Added Gapps support
Added Superuser apk
Removed a few unneeded apks (OTA update for TNT only)
Paid Apps can be downloaded in this version!.
Fixed framework to utilize our external sdcard + usb stick.
Thanks to all those which have donated. Its truly appreciated to see people actually like this and would pay a little to get the improvements in place!!
Thanks!
Thanks to all who reported on beta-testing of this latest release..
WARNING: Use this image at your own risk and i take no responsibility if
you brick your tablet.. Image has been tested on a Toshiba Folio 100 and works fine if guidelines are followed.
FIRST!!!
Thanks Dexter!!!
downloading now...
Thanks
downloading..............................
My Folio should come in few days and I have questin, which room should I choose? This one or 1.2?
Best regards M-XXXX
Hi Dexter,
Do we need Wipe Before Installation ?
shpitz said:
Hi Dexter,
Do we need Wipe Before Installation ?
Click to expand...
Click to collapse
yes..
and sorry..
download has been pulled...
framework does not seems to work with new Vending.apk app..
i tested it fine with old vending apk, and at last moment installed new Vending apk and now it crashes.
Cool, wait until you upload a revised version.
Hi Dexter,
Do yu think it's possible to use TitaniumBackup Backup(Program and system) from 1.2 to réinstall program and system on these 0.3?
Thanks
Stéph.
Ive installed the "crashing" version...
now I wait for the new release...
but...
it's possible to have some some more languages (i.e. Italian )
Ive force close with contact app...maybe a new market related issue...
I cant set my own wallpaper...ther is a way to do that please?
btw great rom! maybe better than foliomod! I really like the new interface!
ps. no screen lock. Ihave to set it somewhere?
davidebeatrice said:
it's possible to have some some more languages (i.e. Italian )
Click to expand...
Click to collapse
did you try "morelocale2" as i suggested in readme?
davidebeatrice said:
I cant set my own wallpaper...ther is a way to do that please?
ps. no screen lock. Ihave to set it somewhere?
Click to expand...
Click to collapse
don't know.. normally you can "lock screen" in settings.
HCPASS said:
Hi Dexter,
Do yu think it's possible to use TitaniumBackup Backup(Program and system) from 1.2 to réinstall program and system on these 0.3?
Click to expand...
Click to collapse
apps yes, but generic settings for the specific edition no..
as this has other framework + different launcher, some settings differ.
but try and find out, you probably find some apps crashing, but then try uninstalling and reinstall.. never tried it.
Dexter_nlb said:
did you try "morelocale2" as i suggested in readme?
Click to expand...
Click to collapse
oops...didn't readed
Dexter_nlb said:
don't know.. normally you can "lock screen" in settings.
Click to expand...
Click to collapse
i cant find screen lock option in settings...
wallpaper issue?
thx!
First experience (except for my small marketapp problem)
is , that it download/install faster... and lagging seems less here?
Of course post experience compared to my Toshiba edition, so we know if its worth using or just maybe, the fact that our Toshiba edition is actually is quite good..
Seriously I love it, it's running perfectly great:
-notification bar and setting are just awesome..
-wifi working great for me
-memory usage is good
-battery and standby I'll check tomorrow after night testing
-SDCard works great even with toshiba file manager (used titanium backup to install back my apps)
-new home also great but less responsive
-launcherpro or adw.launcher both works great but "setting" doesn't work since it's using new setting app
-Browser and mail client looks great
Still some bugs:
-No 360° rotation - Sorry 360° works great but doesn't work with home default launcher
-Only english (us & uk), more local 2 don't change a lot
-Taskmanager doesn't work
well this is my feedback after few minutes testing
again Dexter a great work, thanks
PS/ Happy Holidays for all
Dexter_nlb said:
download/install faster... and lagging seems less here?
Click to expand...
Click to collapse
I confirm...
bigbbl said:
mail client looks great
Click to expand...
Click to collapse
I love it!!!
bigbbl said:
-Only english (us & uk), more local 2 don't change a lot
Click to expand...
Click to collapse
you must be doing something wrong, i got like 15 languages selectable, and even more, when i type my national code as explained in readme.txt .
so check again.. many lang's works fine on this one, just using morelocale2
Hi all,
thanks for this new mod Dexter, but I've some questions :
- With morelocale2, I've change the langage to french, but I've always a QWERTY keyboard, any idea ?
- The mail app don't sync my email with hotmail in exchange, do you know why ?
I like this mod, you're doing a very good work, all my respect
Cheers
hi dexter,
Did You upload the updated version without the crash?
shpitz said:
hi dexter,
Did You upload the updated version without the crash?
Click to expand...
Click to collapse
yes it just finished now.. and its verified!!!
This is Adlxmod Froyo for Defy
- Based off Chinese Froyo Motorola release,
(moto/ME525_umts/umts_jordan/ME525:2.2.1/JDGC_0.26.0/1291957876:user/release-keys)
- Fully Deodexed by me -> Theme ready
- Optionally a dark notification bar patch can be installed, see below.
- Rooted
- Phone can be used with no SIM
- Includes Motoblur, which can be skipped
- Removed Chinese Bloatware
This rom targets people who want to upgrade to 2.2, but still like Motoblur. Performance isn't as good as deblurred rom, but you can OC/UV it to make it perform better (what I do).
Updated:
- Market 2.2.11 + Market Fix (Occidental apps)
- Google Maps 5.0.0
Added:
- Adlx Protips Widget
- Google Apps
- Swype (OEM version from Defy's Eclair rom)
- HTC_IME Keyboard
- Gingerbread Keyboard
- Android Terminal Emulator
- Wireless (Wifi & Bluetooth) Tethering
- Busybox 1.16
- AOSP Email App
- Titanium 3.6.7.1
- LauncherPro 0.8.2
- Tenfar ClockworkMod Recovery
- 3D Gallery (my mod)
- Overclock support (phone won't be OCed by default)
- SetCPU (free from XDA, please donate on the Market)
- Milestone Overclock
- Added in /system/xbin: rwsystem/rosystem, wpa_cli, zipalign, strace, ssh, sqlite3, dexopt-wrapper, tcpdump, fix_permissions, iptables
- Lots of APNs added
- Ad-Blocking
- AOSP Eclair icons
Instructions:
Rom's Nandroid: adlxmod-Defy-Froyo-build05.zip
DarkBar Patch : adlxmod-Defy-Froyo-DarkBarOnly.1-signed.zip
- This Rom is a Nandroid backup of system to be restored over the phone.
- The zip contains:
ZIP:\goapkrev\
\backup\
\date & time\
system.img
nandroid.md5
It has to be unzipped in the root of the SDcard in the exact same structure:
SDCRAD:\goapkrev\
\backup\
\date & time\
system.img
nandroid.md5
If u are not using a Froyo rom yet, start with those steps:
- Flash Chinese Froyo sbf using RSD Lite
- Root using SuperOneClickFor2.1
- Reboot
- Install Tenfar Recovery application
- Run Tenfar Recovery
- Install Recovery
( If you are using already a Froyo rom for Defy, you can jump directly to these steps )
- DISABLE USB Debugging Mode (In Settings / Applications / Developpement)
- Reboot into Recovery
- Restore nandroid
- (Optional) Flash the DarkBar patch
- Wipe All!
- Reboot
Known Issues:
- Gallery 3D will FC if click on the camera button, will fix later
- Swype close word window doesn't show up upon double tap (?!)
- Only English & Chinese locales for the moment
- No PTBR locale in swype. Working on it.
- Camera Flash is sort of working for me, it fires correctly but seems a bit out of sync. Hope you have more luck with that.
Downloading now...will definitely check it out! Thanks.
Here's the problem, I like this ROM, but I hate BLUR, however this rom doesn't have too much blur, and sadly, the reason I can't use this ROM is because EDGE is the only connectivity I get. Also, I'm using another ROM atm and everytime I upgrade to maps 5.0 navigation stops working and maps lags alot. Is that the case here?
EDIT: Also, I like the keyboards and I want skype back, but I can't extract them because it's an .img file and I don't have anything that can view it...therefore i was wondering, coiuld you please upload the swype and HTC IME? I'm on the original USA DEFY and miss swype and I like HTC IME. =[
isikh said:
Here's the problem, I like this ROM, but I hate BLUR, however this rom doesn't have too much blur, and sadly, the reason I can't use this ROM is because EDGE is the only connectivity I get. Also, I'm using another ROM atm and everytime I upgrade to maps 5.0 navigation stops working and maps lags alot. Is that the case here?
EDIT: Also, I like the keyboards and I want skype back, but I can't extract them because it's an .img file and I don't have anything that can view it...therefore i was wondering, coiuld you please upload the swype and HTC IME? I'm on the original USA DEFY and miss swype and I like HTC IME. =[
Click to expand...
Click to collapse
You can install swype by their official page "http://beta.swype.com/" just register and follow the steps, i had to uninstall and remove some files on the one the comes with Defy but after it i was able to do install it.
I did all of this because i wanted swype in Portuguese, that is not available in the ROM's
edition- said:
You can install swype by their official page "http://beta.swype.com/" just register and follow the steps, i had to uninstall and remove some files on the one the comes with Defy but after it i was able to do install it.
I did all of this because i wanted swype in Portuguese, that is not available in the ROM's
Click to expand...
Click to collapse
That is good and all, but I want the version of Swpe that came with my T-Mobile DEFY, well it's actually my friend's DEFY, he got it yesterday I"m rooting and helping, but anyways he wants the version that came with the phone originally the white skin and all. I know that's possible because this ROM has it, but I"m running a different 2.2 ROM at the moment, and I don't know how to extract the keyboard form this ROM.
There are instructions on restoring 3g for US on this forum.
isikh said:
Here's the problem, I like this ROM, but I hate BLUR, however this rom doesn't have too much blur, and sadly, the reason I can't use this ROM is because EDGE is the only connectivity I get. Also, I'm using another ROM atm and everytime I upgrade to maps 5.0 navigation stops working and maps lags alot. Is that the case here?
EDIT: Also, I like the keyboards and I want skype back, but I can't extract them because it's an .img file and I don't have anything that can view it...therefore i was wondering, coiuld you please upload the swype and HTC IME? I'm on the original USA DEFY and miss swype and I like HTC IME. =[
Click to expand...
Click to collapse
isikh said:
That is good and all, but I want the version of Swpe that came with my T-Mobile DEFY, well it's actually my friend's DEFY, he got it yesterday I"m rooting and helping, but anyways he wants the version that came with the phone originally the white skin and all. I know that's possible because this ROM has it, but I"m running a different 2.2 ROM at the moment, and I don't know how to extract the keyboard form this ROM.
Click to expand...
Click to collapse
Try to install this .apk, is from moto.
rbeier1221 said:
There are instructions on restoring 3g for US on this forum.
Click to expand...
Click to collapse
I saw that, but are there any not involving ADB because I keep getting an error when trying to use ADB with the DEFY -
I get this error:
* daemon not running. starting it now *
CreateProcess failure, error 2
* failed to start daemon *
error: cannot connect to daemon
isikh said:
I saw that, but are there any not involving ADB because I keep getting an error when trying to use ADB with the DEFY -
I get this error:
* daemon not running. starting it now *
CreateProcess failure, error 2
* failed to start daemon *
error: cannot connect to daemon
Click to expand...
Click to collapse
You need to uninstall/reinstall ADB or re-read the installation instructions. You have a problem with your environmental variables.
http://wiki.cyanogenmod.com/index.php?title=Howto:_Install_the_Android_SDK
Also that 3G fix only works with Android 2.1 (eclair). You will need to make or get a 3G fix for Android 2.2 (froyo). I'm not sure how that would happen, since you would need some files off of a 2.2 rom that is compatible with US networks, and the only current 2.2 rom is the chinese version. Which is why I haven't tried any of the 2.2 roms yet. I'm just going to wait until something more stable is available.
Hi Adlxdum, I restored your back and your rom is really fast and pretty neatly modded, thank you very much for that. However, immediately after booting, google is restoring all the apps and settings which I had on my previous rom. Including the apps. Hence not much customization seems to be left at the end of this. Is there a file that is somewhere here on either my sd card or inside my phone which I can delete. That way I can enjoy the complete benefits of your rom.
thanks again.
EDIT: Sorry there is an option on froyo for that. I unchecked the "restore backup" option under privacy.
Hey guys, will i be able to put it in top of 2.51?
Edit: I'm now testing
isikh said:
I saw that, but are there any not involving ADB because I keep getting an error when trying to use ADB with the DEFY -
I get this error:
* daemon not running. starting it now *
CreateProcess failure, error 2
* failed to start daemon *
error: cannot connect to daemon
Click to expand...
Click to collapse
There is an app on the forum here that will restore 3G. I'm using it and it works. I'll see if I can find it.
rob-t said:
Also that 3G fix only works with Android 2.1 (eclair). You will need to make or get a 3G fix for Android 2.2 (froyo).
Click to expand...
Click to collapse
Try this one: http://forum.xda-developers.com/showthread.php?p=10798849#post10798849
No find this app.
ItfunzBasebandSwitcher.apk
Here it is: http://forum.xda-developers.com/attachment.php?attachmentid=490361&d=1295114350
It is actually booting after recovery from 2.51 :X, lets see what happens
Ok lets see so far.
It did boot, first SDCard wasn't being detected, it was ok after reboot.
Found out that camera wasn't working, used the camera fix.sbf from "bihariel" ROM, it is now working but flashlight only worked the first time, i'm now pushing flashlight fix, lets see what happens.
hi,
I flashed this and it seems pretty good. one question though, although i can start blurhome.apk if i use root explorer i can't get it to appear in home switcher.
Home can i make blurhome become the default launcher?
cheers
Andy
andyfletcher said:
hi,
I flashed this and it seems pretty good. one question though, although i can start blurhome.apk if i use root explorer i can't get it to appear in home switcher.
Home can i make blurhome become the default launcher?
cheers
Andy
Click to expand...
Click to collapse
If you don't use Launcher Pro, you can remove it from /system/app.
Adlxdum, hey Bihariel just put out a camera fix and I used it on your ROM too. It works like a charm all that flash problems and it being unsynchronous is all gone.
I urge all you guys try that fix. It actually works on every ROM of froyo we have here.
chaihg said:
Adlxdum, hey Bihariel just put out a camera fix and I used it on your ROM too. It works like a charm all that flash problems and it being unsynchronous is all gone.
I urge all you guys try that fix. It actually works on every ROM of froyo we have here.
Click to expand...
Click to collapse
Could you link it? And also, I'm on T-Mobile USA, could someone please tell me how I can get 3G working WITHOUT ADB access? Using Terminal or root explorer perhaps? Also, does WiFi calling work? I really need that to work as I have no signal in my dorm. Please help, and it'd be much appreciated. Thanks!
!!This is ONLY for Toshiba Folio 100!!!
This Mod is based on Toshiba Stock with additions from Nvidia SDK and Blur to make a better functioning stock rom with google apps and better OpenGL ES support.
You can also follow updates on Twitter now: Dexter Picard (DexterPicard) on Twitter or
me for my excellent and continued development or you can visit my new homepage at Dexter's mods
for new users with latest 2.2.5.0131 firmware, here is a howto on reverting tablet to be able to install custom roms.
Wiki pages available here and here Other non-FolioMod , but folio100 threads Kernel&Tweaks & General questions thread
Please use these for non-FolioMod questions, like screen,battery etc...
Installation Instructions:
ALWAYS HAVE CHARGER CONNECTED WHEN UPDATING A FIRMWARE.
A FACTORY RESET IN RECOVERY MENU IS ALWAYS RECOMMENDED TOO.
download latest FolioBlur full zipfile- Extract contents to a folder and follow instructions below.
copy the update.zip from inside downloaded zipfile to the root of your sdcard, and insert sdcard into folio.
Enter "Recovery menu" when folio is just turned on and press (POWER) once and (VOL up) next.
press (VOL up) Factory reset or system update.
press(VOL down) to continue to system update.
press (VOL up) to confirm system update.
during installation progress bar will show har far it is.
folio will reboot after installation.
if you need to wipe, repeat the steps above without sdcard inserted, and you get into recovery menu. Press "HOME" button to see menu and choose "factory reset".
After reboot a BLACK screen appear for 1 or 2 minutes!! don't worry, its normal!
Rollback to original stock rom:Download Folio stock image for full restore to stock rom
extract zip to a folder, and from here follow steps 1 - 7 above, to install the update.zip .
This image is for rollback purpose, if you do not want the mod edition, here is the way back to stock rom.
Remember to run a factory reset before or after this stock rom install..
Latest Full update
FolioBlur v1.2
Patches
V1.2 power button fix - here
Installs like update.zip in regular recovery menu, so rename this file to update.zip after download and put on sdcard and install from recovery.
Old releases
FolioBlur v1.1
FolioBlur v1.0
Known issues (also reported by users)
- proper usb support. there is no active service handling it.
THANKS to
Weeds2000 , for the great help and fixes done so far for us (Orientation + paid apps, vold with NTFS corrections to FolioMod) + Kernel compiles
DerArtem - Compiling kernel + and being very active on getting 3G modem support for us on our folio!!
CHANGELOG
v1.2
3G enabled now.. works with many Huawei 3g usb dongles.
fixed orientation sensor with some games
Power button fix is added as extra (found fix in last moment) download patch to correct it.
v1.1
Flash 10.2 included and fully working now (tested with games + streaming media)
v1.0
Initial first release
Thanks to all those which have donated. Its truly appreciated to see people actually like this and would pay a little to get the improvements in place!!
Thanks!
WARNING: Use this image at your own risk and i take no responsibility if
you brick your tablet.. Image has been tested on a Toshiba Folio 100 and works fine if guidelines are followed.
NOTES on first release:
Reboot once after first bootup and launch screen has appeared, to enable non market apps install from ie. sdcard.
this is not available in this settings.
nice work, but could u post some screen shots of the homescreen and some other screens. this will make it easier for the people to choose from the different variations of custom roms u make for the folio.
kaivish said:
nice work, but could u post some screen shots of the homescreen and some other screens. this will make it easier for the people to choose from the different variations of custom roms u make for the folio.
Click to expand...
Click to collapse
Was wondering the same
killerbie said:
Was wondering the same
Click to expand...
Click to collapse
I cannot so easily provide it.. the screencapture function does not work on this framework, and no other utilities currently do snapshots.
and my camera pics are really bad.
does this one help
Image is online..
not sure yet on how to provide pictures...
Hi Dexter,
thanks for this great great ROM.
Now only two question:
1) Is possible to have italian language ?
2) I'm not able to go in sleep mode pressing the phisical on/off button on. Is it normal ?
Thanks a lot for your great work and sorry for my bad english.
ambste said:
1) Is possible to have italian language ?
2) I'm not able to go in sleep mode pressing the phisical on/off button on. Is it normal ?
Click to expand...
Click to collapse
1) try MoreLocale2 from Market
2) yes, for now its actually a defect, i think keys layout somehow is wrong. it works fine on elocity.
Thanks for your fast reply.
Is possible put the folio in sleep mode with a soft button ?
try market, for a screen off widget? or so?
otherwise here and now, try to set screen timeout to a lower value?
I have only one question its possible czech language on this rom? thank.
Keyboard from FolioBlur
Hi,
how do I get the keyboard from the FolioBlur? Can I use the keyboard in Foliomod 1.4?
Regards
keiler1972 said:
Hi,
how do I get the keyboard from the FolioBlur? Can I use the keyboard in Foliomod 1.4?
Regards
Click to expand...
Click to collapse
i don't if its possible... i think it needs some more work, to run on non-blur editions.
Dexter,
I really like this rom.
If you can fix the Flashplayer and USB issue. I think this ROM is beter then FolioMod rom.
Gtz
Jossie
Really surprised with motorola the phones that i used to have from them whore fiasco after fiasco to the point that i promised never to buy none off their products ever again even if they wore painted in gold but lately i have have seen great stuff from them and a proof is this blur rom to our beloved (thanks to you Dexter) folio... Really some nice apps from motorola like the possibility to in the browser of your pc control your device very simple...And the media server app very very easy to use...
fernando nogueira said:
Really surprised with motorola the phones that i used to have from them whore fiasco after fiasco to the point that i promised never to buy none off their products ever again even if they wore painted in gold but lately i have have seen great stuff from them and a proof is this blur rom to our beloved (thanks to you Dexter) folio... Really some nice apps from motorola like the possibility to in the browser of your pc control your device very simple...And the media server app very very easy to use...
Click to expand...
Click to collapse
+1 .. on mobiles, Blur is really kinda slow to use (except latest Defy), but with 1Ghz, it really kicks ass... its not much extra but its enough compared to a stock edition, and the fact they kept it simple and still kinda stock.
and no its not like ADW launcher, its more
Is it possible yo use the media streaming app and remote access app from this rom in ,let's say, foliomod?
Any chance will ever see gsm working on this?
I like this rom but the missing stuff from foliomod made return to foliomod1.3d anyway i am always installing new roms to explore...
keiler1972 said:
how do I get the keyboard from the FolioBlur? Can I use the keyboard in Foliomod 1.4?
Click to expand...
Click to collapse
it was possible
take the lainIME.apk + /system/lib/libjni_latinime.so and copy to your FolioMod instead after install .. it replaces the old android keyboard but it works.
Dear Dexter,
it seams your website http://dext3r.komodin.org/folio100/ is currently unavailable, do you have a mirror for the zip of this ROM ?
Thanks
JCLB said:
Dear Dexter,
it seams your website http://dext3r.komodin.org/folio100/ is currently unavailable, do you have a mirror for the zip of this ROM ?
Thanks
Click to expand...
Click to collapse
i don't have a mirror currently. seems to be down as HOST decided to mirror wiki leaks :-( bad for me..
What are nightly builds?
Nightly builds are automated builds from latest cyanogenmod sources. they are not tested in deepth like RC's or stable versions. In most cases they work without any issues. Thats because all patches get reviewed before they are merged into sources - this way, merging of bad code doesnt happen very often.
Since vega does not have official nightly status yet, i do semi-official builds for you on a semi regular basis. We will get official nightlies, once bluetooth is working - but that is a pretty complicated issue.
Vendor vega
The vendor vega is currently for Advent Vega and PoV Mobii devices. There might be more added later on.
Official nightly mirror
http://mirror.teamdouche.net/?device=vega
Update 31.05.2011
buildbot had a hdd crash, and it can take some more days until nightlies are back online. that long, i might post semi-official nightlies here.
mirror1: cm_vega_full_teamdesire-20110531-1412.zip size: 66M (68406215 bytes)
mirror2: cm_vega_full_teamdesire-20110531-1412.zip md5sum: 3b8bb1c21cb7c992927566a609a8c21d
Nightly changelog
http://cm-nightlies.appspot.com/?device=vega
Nightly install instruction
Coming from another rom?
Do a full wipe in clockwork mod recovery
Install latest nightly build from here
Flash latest gapps from here
reboot
do the first-time-run-setup wizard
if you dont use gsm/phone, reboot to recovery and flash attached vega-phone-removal.zip - saves battery
Upgrading from older nightly?
Just flash latest rom from here in clockworkmod recovery
No need to wipe or flash gapps again, if you done on first install
In rare cases you will encounter bugs, noone else encounters - wipe then and do a fresh install
In at least 99% no wipe needed - there are known people not having wiped for at least half a year
Doing a nandroid backup before upgrading is always a wise idea, in case something goes wrong
if you dont use gsm/phone, flash attached vega-phone-removal.zip - saves battery
reboot to your updated rom and enjoy
Overclocking instructions
use settings->cm settings->preformance->cpu settings to switch frequencies. optionally use setCPU and similar tools.
USB Host mode instruction
to enable usb host mode for keyboard, mouse and other support, power device off. power it back on. once the screen gets lit, press and hold back key until device is booted (you see the homescreen or lockscreen). now you can connect various usb devices.
clockworkmod 3 for vega
with nightly 61 and later, use rom manager to flash latest stable recovery.
List of known bugs
This is a list of cm7 bugs specific to vega - i wont cover cm7 general bugs here, since they are covered on other places. Feel free to discuss them here, thats what this thread is for.
no legacy a2sd yet - working on it
power->reboot->recovery doesnt work and power->reboot->bootloader should be removed
Removed Themes
To save space, we had to remove the two cm included themes. If you want them, just download them here and install like any other app.
mirror1: Cyanbread.apk size: 3.6M (3748359 bytes)
mirror2: Cyanbread.apk md5sum: a6963767a063a888536bc470569dcb54
mirror1: Androidian.apk size: 4.0M (4192665 bytes)
mirror2: Androidian.apk md5sum: 6657fa2e31c5a86ec5bdb03ac6e72a65
Removed Wallpapers
To save space, we also removed CMWallpapers app. To reinstall them on data partition, download this app and install like any other app.
mirror1: CMWallpapers.apk size: 6.0M (6248124 bytes)
mirror2: CMWallpapers.apk md5sum: b0d02c6eb75e39b7aa0b77e5cee20ace
This seems really sweet!
I have some questions:
1) Can the soft buttons be placed further away from each other? Unlike the Nook Color, the Advent Vega has a screen with touch registering issues and it's probably easy to misclick buttons if they're in the normal disposition.
2) What's the "encore" release for?
Danke für die Anstrengung!
Hi i tried to install CM7 before the version b2 and now this one and both stuck at the boot screen with android and the arrow makes circles. Do i miss something? i tried full wipe + format sd but still nothing. I must wait longer than 20 min?
Any suggestions
Thank you
dkampo said:
Hi i tried to install CM7 before the version b2 and now this one and both stuck at the boot screen with android and the arrow makes circles. Do i miss something? i tried full wipe + format sd but still nothing. I must wait longer than 20 min?
Any suggestions
Thank you
Click to expand...
Click to collapse
Same here. Full wipe of data, cache, dalvik cache.
Waited 40 minutes but system does not boot. Only arrow making circles. Restart did not help either.
Welcome to Vega Murdock, remember you from my DesireHd Nightly days. Whats up with these two zips? One is the rom and one addons?
Logseman said:
This seems really sweet!
I have some questions:
1) Can the soft buttons be placed further away from each other? Unlike the Nook Color, the Advent Vega has a screen with touch registering issues and it's probably easy to misclick buttons if they're in the normal disposition.
2) What's the "encore" release for?
Danke für die Anstrengung!
Click to expand...
Click to collapse
with the big buttons (much bigger as on default cm7), i dont have any issue to hit what i want. dont want it even bigger.
BeeGee_Tokyo said:
Same here. Full wipe of data, cache, dalvik cache.
Waited 40 minutes but system does not boot. Only arrow making circles. Restart did not help either.
Click to expand...
Click to collapse
zero idea. works here. gotta point bumble bee to this. you did take the vega build and not flash the encore build?
nickwarn said:
Welcome to Vega Murdock, remember you from my DesireHd Nightly days. Whats up with these two zips? One is the rom and one addons?
Click to expand...
Click to collapse
still having and hugging my desire hd
encore = nook color
vega = vega + mobii
i just copied that post from the nook color thread where this is all discussed.
please discuss overall issues (non-vega-related) on nook color thread
mad-murdock said:
...
zero idea. works here. gotta point bumble bee to this. you did take the vega build and not flash the encore build?
...
Click to expand...
Click to collapse
Yes, I checked the file on my SDcard its the Vega file. I checked as well the build.prop and updater-script, it says definitely Vega.
When I am back home tonight I will reflash stock ROM to recover and retry flashing your ROM.
The Vega rom boots and runs nice. Its very odd having statusbar going from bottom to top but very cool. Nice work. Now back to testing
Just one question, why did you post Nook Colour rom here? Encore is Nook, right?
Maybe we could have multi language, would be nice
Edit. You answered before i posted, im to slow
mad-murdock said:
...
zero idea. works here. gotta point bumble bee to this. you did take the vega build and not flash the encore build?
...
Click to expand...
Click to collapse
nickwarn said:
The Vega rom boots and runs nice. Its very odd having statusbar going from bottom to top but very cool. Nice work. Now back to testing
Just one question, why did you post Nook Colour rom here? Encore is Nook, right?
Maybe we could have multi language, would be nice
Edit. You answered before i posted, im to slow
Click to expand...
Click to collapse
Does the ROM require EXT2/3/4 on the SD card? I don't have it and this is the only thing I can think about at the moment which might be different.
The ROM comes with its own kernel? I had before installed [KERNEL] Buzz Vega | .32.35 | CIFS | TUN | EXT4 | SLAB | NOOP | WiFi | NTFS | HOST/SLAVE | 0.7, Updated 25/03/11 from buzzing bee. But that should have been overwritten when I flash your ROM.
BeeGee_Tokyo said:
Does the ROM require EXT2/3/4 on the SD card? I don't have it and this is the only thing I can think about at the moment which might be different.
The ROM comes with its own kernel? I had before installed [KERNEL] Buzz Vega | .32.35 | CIFS | TUN | EXT4 | SLAB | NOOP | WiFi | NTFS | HOST/SLAVE | 0.7, Updated 25/03/11 from buzzing bee. But that should have been overwritten when I flash your ROM.
Click to expand...
Click to collapse
I came from CorvusVega rom but as long as you wipe everything cache,dalvik,system,data,boot, it shouldnt be a problem. I hate that we cant get in to recovery from off position. If thats possible to do with some hack that should be the next big thing
Hello,
when i try to download your ROM i became a error 404 file not found.
new build, new features, new links - updated first post.
and yes, its buzz kernel - no idea if he made slight modifications, but its the same guy responsible for buzz kernel and vega cm7 target.
rbensch said:
Hello,
when i try to download your ROM i became a error 404 file not found.
Click to expand...
Click to collapse
deleted the old files BEFORE uploading... shouldnt do that next time get new build from first post
mad-murdock said:
new build, new features, new links - updated first post.
and yes, its buzz kernel - no idea if he made slight modifications, but its the same guy responsible for buzz kernel and vega cm7 target.
Click to expand...
Click to collapse
Does this means we can do the switch to host mode by the back button trick?
Can anyone try?
Thanks!
Got the ROM finally working, maybe during 1st flash something went wrong.
Its still the old version, new version is still downloading (terrible slow connection here in China).
I installed it on a Viewsonic Viewpad 10s, which is the Vega but with build in 3G card. Unfortunately the card is not working. when I go to the settings -> Wireless & network settings -> Mobile networks, I can enable data communication, but he does not find any provider and the signal in the task bar shows no signal.
In the stock 1.09 ROM its working without any problems.
Will download latest version, test again and report here.
Harplo said:
Does this means we can do the switch to host mode by the back button trick?
Can anyone try?
Thanks!
Click to expand...
Click to collapse
should work. feel free to flash another kernel over this. changes are not kernel related.
current build got some minor bugs which I fix when I get back tonight. mainly the new soft button. check nook color thread for details
Morsed by hitting a plastic pipe with my Desire HD. Excuse typos.
I believe this rom will have the same kernel as Bumble-Bee's CM7 build, so no host and no a2sd!
However I have asked BB to make a new kernel so hopefully he will do this asap.
Great Rom!! Thanks for sharing your work & time with us.
Thinks I like.
CM7 Booting image
CM7 look & tweaks
CM7 Table tweaks, especially bottom bar.
Host mode working. N1!
Don't like:
The bar buttons. Really don't like them.Any change of changing them? I know it's a silly thing but them seem huge to me.
Bugs I found:
Default Keyboard going on and off every time I press a key. Annoying.
Wifi disconnecting randomly and not reconnecting in a while.
Touch Screen not responding until I change orientation. Weird.
Thanks!
Harplo said:
Great Rom!! Thanks for sharing your work & time with us.
Thinks I like.
CM7 Booting image
CM7 look & tweaks
CM7 Table tweaks, especially bottom bar.
Host mode working. N1!
Don't like:
The bar buttons. Really don't like them.Any change of changing them? I know it's a silly thing but them seem huge to me.
Bugs I found:
Default Keyboard going on and off every time I press a key. Annoying.
Wifi disconnecting randomly and not reconnecting in a while.
Touch Screen not responding until I change orientation. Weird.
Thanks!
Click to expand...
Click to collapse
We are all diffrent i like the soft buttons. about keyboard going on and off try moving soft buttons to right side and remove quick notification button. That fixed it for me. The buttons can be changed back later than it will work as it should. But i think theres some strange behavior from quick notification button, for example when pressing it it shuts down the screen it dont answer to any touches only on soft buttons, so i have to press the statusbar up and from there press the back button then it wakes up. I dont know, maybe its supposed to be like that.
Very nice ROM. Flashed it last night and seems to work nice. The buttons work great.
However i have a performance issue. A couple of minutes it works very smooth and then it freezes for a while and then continues. Still have the problem after a couple of reboots and after using it for a few hours.
second i installed the gapps that are available for CM7 (the metapackage wich should also work for tegra based devices). I can download apps, but then i cannot see in the market as downloaded.
I came from Modaco r8 and did a full wipe before installing.
Keep up the good work.
EDIT: When the screen freezes only the statusbar and the buttons are responding on touches. The rest of the screen does not respond. The screen will respond again when i change the orientation of the screen (i.e. from landscape to portrait and back to landscape).
Sent from my HTC Vision using XDA App
PRIME! v1.7
This is a tweaked stock rom for the Asus Eee Pad Transformer TF101
Special thanks to: CaNsA | Hacre | afm | MoDaCo | dc13 | supercurio | Bumble-Bee | RaYmAn | netarchy | Vividboarder | CurtisBeef
This rom is a work in progress and all feedback is appreciated. It is build from the stock rom and has a few tweaks added. As always whenever installing any rom, please take care to follow instructions as no one enjoys seeing their prized possesion not working.
Instructions:
1. Copy ROM to sdcard
2. Verify the MD5 of the zip on the sdcard, DO NOT FLASH IF THIS DOESN'T MATCH THE MD5 UNDER THE DOWNLOAD LINK!
3. Boot into clockworkmod recovery
4. Take a nandroid backup (optional but highly recommended)
5. Install the ROM
6. Reboot and wait... The more apps you have installed the longer the first boot will take... Please not that after the lock screen comes up your TF may be sluggish for a minute while the rom initialises.
7. After a successful restart, you can change the default power mod if desired.
Due to changes made in the launcher for 1.7 you might get a black background after the first boot. The wallpaper picker may also force close. A reboot will sort this problem out.
Rom Details:
Android 3.2
GPS - V1.5.0
WiFi - V5.2.53
Bluetooth - V6.19
Kernel - 2.6.36.3
Build - HTJ85B.prime_epad-1.7-20110804
MobileDock Firmware- EP101-0209 (Prompts for install after first boot if required)
See the second post of this thread for the changelog and optional extras including kernels.
Download Links: - Main Rom (You need this one)
PRIME! v1.7 - Alternate Link - Alternate Link 2 - Alternate Link 3
Torrent Link - Thanks Aligatro and WoodburyMan
MD5: c30c353e61d89c94437c3218723908c6
NVFLASH VERSION - Includes CWM 3.2.0.1
http://www.sdx-downloads.com/devs/roach2010/ROMS/prime1.7.tar.bz2
MD5: 35b5add545a775e932ec5b44e7653c9a
Previous versions:
See this thread
WMV Patch
I've discovered that the netflix library patch breaks WMV support. Here's a patch to put back the original library and to re-enable wmv support. Also the netflix library seems to have the undesirable effect of process locking the /system folder so it cannot be remounted and as such is always in rw mode. I suspect that this may be a bad thing in the long run for I/O.
WMV Patch - Breaks Netflix
Changelog
Changelog:
v1.7
Based on 8.6.5.6-20110728 Honeycomb 3.2
Everything fom previous versions
Compass calibration fault fixed - Thanks Dexter. I owe you one.
Zipalign on boot
CWM 3.1.0.1 Recovery included confirmed working with Keyboard Dock
Google Maps updated to 5.8.0
Google Music updated to 3.0.2
New backgrounds added
Netflix patch added
AnyConnect libs added
For older changelog see here: http://forum.xda-developers.com/showpost.php?p=15191789&postcount=2
ROM EXTRAS
Power button mods
These mods give you either a reboot or reboot to recovery option when you long press the power button.
SHUTDOWN and REBOOT power button mod - Alternate Link - Alternate Link 2 - Alternate Link 3
MD5: d54e2954f0a220839aac661934b02841
SHUTDOWN and RECOVERY power button mod - Alternate Link - Alternate Link 2 - Alternate Link 3
MD5: c6d03c140cb40b93025f1600bba68e18
REBOOT and RECOVERY power button mod - Alternate Link - Alternate Link 2 - Alternate Link 3 - (included in rom)
MD5: 9a90986be2e0d00f634c4d5c03b4c6c4
NEW! REBOOT, RECOVERY and SHUTDOWN power button mod - This works best with a dock since the soft buttons don't work but putting the tablet into standby and back will act as a cancel button (Unless the tablet is locked when you long press) - If you're not sure what I mean then try it anyway and you can always change the mod if you don't like it.
MD5: 82e87a982767ddb4baf0184612d70ec0
PRIME KERNELS
OC up to 1.6Ghz
OC Kernel based on Netarchy's overclock parameters
Stock Kernel
Stock Kernel with CIFS/TUN/VOODOO modules
Note, either kernel can be flashed directly onto Prime with no need to remove any modules beforehand. The install scripts add or remove modules as required.
The source for the OC Kernel is available as always from my github
Also Reserved for me
Also reserved for me
Awesome, thanks for all your hard work
jefbal99 said:
Awesome, thanks for all your hard work
Click to expand...
Click to collapse
QFT. Downloading now.
Very nice
Thanks! Downloading now!
Prime FTW!!!!!!!
Sent from my Transformer TF101 using XDA Premium App
Awesome stuff Roach! Thanks a bunch for your hard work...
I will be updating my PCB Blue theme as soon as I get a chance too!
Once again, Thank you! Can you also release nvflash bins like you did the last time. I am dual-booting with ubuntu and have no CWM partition, so the easiest for me would be to use nvflash. Or how can I tweak this update file, so it doesn't overwrite recovery partition when I will update from booted 1.6 ? Thanks.
Oh and I made a torrent again.
aligatro2010 said:
Once again, Thank you! Can you also release nvflash bins like you did the last time. I am dual-booting with ubuntu and have no CWM partition, so the easiest for me would be to use nvflash. Or how can I tweak this update file, so it doesn't overwrite recovery partition when I will update from booted 1.6 ? Thanks.
Oh and I made a torrent again.
Click to expand...
Click to collapse
+1 interested un the nvflash files as well
Seems I'm the first installing it... ;-)
@Roach2010 Thanks dude. I came from the a rooted DE_8.4.4.11 and as I'm a lazy guy, this ROM is exactly what I was looking for.
Installation via CWM worked easy, the first boot as well. So far everything is running as it should be.
Thanks again.
sweeet been waiting for Prime to hit 3.2 .. cant wait to check out the update! thanks for all your hard work.
After flashing over 1.6,the wallpaper was black, so went to reset the wallpaper, and get force close when setting a wallpaper. Setting a live wallpaper works. I did flash the Xoom icons from the 1.7 beta thread, though.
timtlm said:
After flashing over 1.6,the wallpaper was black, so went to reset the wallpaper, and get force close when setting a wallpaper. Setting a live wallpaper works. I did flash the Xoom icons from the 1.7 beta thread, though.
Click to expand...
Click to collapse
Might be something to do with the changes I made to the Launcher apk. Try rebooting as that has worked for someone else. Might only be a first boot issue.
I've updated the OP to say a reboot is needed after first run.
thanks, reboot did fix it.
Does the rom zipaligno n every boot or just the first one? And do i need to wipe if coming from 1.6v1? And while im asking questions, did the 3.2 update change the sd card handling for the tf or is it the same as it was previously? Im not sure i want to update if it switched to the new read only between the two medias
Flashed over latest Magnus rom with no wipe. So far no issues, Netflix still working.
Camaros_Kill said:
Does the rom zipaligno n every boot or just the first one? And do i need to wipe if coming from 1.6v1? And while im asking questions, did the 3.2 update change the sd card handling for the tf or is it the same as it was previously? Im not sure i want to update if it switched to the new read only between the two medias
Click to expand...
Click to collapse
Yes, No and Sort of
It does zipalign on every boot, but only if an apk needs it.
You don't need to wipe but read the OP about changes to framework.
The update added the MicroSD card showing up in windows but you can copy between medias just fine.
Anybody got the 32GB splash screen?
as always great job... thanks roach you are the man...