Related
Thanks to FollowingInsanity for editing the build.prop file to get it working corectly, and thanks to Maxisma for the Droid dump. Thanks to everyone else who pitched in on this whole thing. Really all I did was realize the exact line that needed to be changed....everyone else did the rest
Here are instructions on how I got the new maps w/ Navigation to work via adb. I'm running the official rooted 1.6 build, but this should work for anyone.
(if you don't know how you use adb, go to the here
Next, you need to uninstall the old maps.apk file and here's how I personally did it since you can't just go to "uninstall" from the Application Settings(these instructions start already in the ADB shell):
# mount -o rw,remount /dev/block/mtdblock3 /system
# cd system
# cd app
# rm xxxxxxx (this is whatever your maps.apk is titled. sometimes is just maps.apk, but it could also be com.android.google.maps.apk or somethin like that)
# exit
Click to expand...
Click to collapse
Now you've uninstalled the google maps. You can then do these next steps outside of adb.(for instructions purposes i'm using my own Android location):
C:\android\tools> adb pull /system/build.prop C:\Android
C:\android\tools> adb pull /system/build.sapphire.prop C:\Android
The 2nd may not be may be build.trout.prop or something to that effect...build.xxxx.prop
Click to expand...
Click to collapse
Next, change those 2 file names on your PC from build.prop to build-backup.prop and build.xxxx-backup.prop(if you have one) so that you don't lose those files in case anything stupid happens in the mean time lol.
Make a 2nd copy of build.xxxx-backup.prop and rename it is build.xxxx.prop. So now you should have a build.xxxx.prop AND a build.xxxx-backup.prop
Now you'll need the build.prop file to use
build.prop
(IF you are running a sapphire build, you can also use the build.sapphire.prop file located there and skip down to "re-loading prop files")
I saved that file to the same location that I saved my original files.
open build.xxxx.prop in notepad. look for where it says:
ro.build.description=kila-user 1.6 DRC83 14721 ota-rel-keys,release-keys
ro.build.fingerprint=xxxxxxxxxx:user/ota-rel-keys,release-keys
# end build properties
Click to expand...
Click to collapse
you'll need to delete the line that says ro.build.fingerprint=xxxxxxxxxx:user/ota-rel-keys,release-keys but DO NOT delete the line that says #end build properties
replace the line you deleted with the following:
ro.build.fingerprint=verizon/voles/sholes/sholes:2.0/ESD20/17572:user/ota-rel-keys,release-keys
Reloading Prop Files
next, back in your command line window do the following:
c:\android\tools> adb push c:\android\build.prop /system/
c:\android\tools> adb push c:\android\build.xxxx.prop /system/
Click to expand...
Click to collapse
then restart your phone
while the phone is restarting, go back and rename your build.prop and build.xxxx.prop files to build-update.prop and build.xxxx-update.prop, then change your build-backup.prop and build.xxxx-backup.prop to build.prop and build.xxxx.prop
After it restarts you'll want to locate your maps.apk file(the new one) and go back into your command line and type:
c:\android\tools> adb shell
# mount -o rw,remount /dev/block/mtdblock3 /system
# exit
c:\android\tools> adb install c:\android\maps.apk
(install crap...if it doesn't install correctly then don't do whats below)
Click to expand...
Click to collapse
Go check your google maps, type in two locations and click "go" and on the next screen you should see a button that says "Navigate"
go back to your command line screen and type:
Sorry if this is confusing, anyone who could make it more simple, please feel free to give it a try, but this is the best I could offer so people wouldn't have to go looking though the whole think tank thread to get everything they need to get it working
IF THE INSTALL GAVE YOU AND INVALID_UPGRADE ERROR THEN TRY THIS:
(again these instructions are using my own android sdk location, replace the
c:\android\tools with YOUR sdk location
from the command line type the following:
c:\android\tools> adb shell
# mount -o rw,remount /dev/block/mtdblock3 /system
# exit
c:\android\tools> adb pull /data/system/packages.xml c:\android\
Click to expand...
Click to collapse
BACK UP THIS FILE BEFORE EDITING IT
Once that's done, open that xml file in a text editor hit ctrl+f and search for maps, the first one will probably say auth.sitemaps, ignore that, keep searching untile you get to something to the effect of com.android.google.maps.apk or something like that. when you see that, you'll want to delete everything from "<packagename=" to "</package>" for the google maps app. BE VERY CAREFUL!!!! you don't want to accidentally delete something else, thus the reason for the back up.
after you've done that, go back to your command prompt and type:
c:\android\tools> adb push c:\android\ /data/system/packages.xml
c:\android\tools> adb install c:\android\maps.apk
Click to expand...
Click to collapse
it should then install perfectly fine. thats what I had to do to get it to work for me
I love you guys! will try this when I get home from work!
it does not appear to be 100% working....yet...
as posted by dwang, http://forum.xda-developers.com/showpost.php?p=4921655&postcount=275
dwang said:
If you push the old build.prop files back, after a while, the nav option disappears.
Click to expand...
Click to collapse
which I can confirm. About midnight last night it was working okay, and this morning it was gone.
followinginsanity says he will work on it today. http://forum.xda-developers.com/showpost.php?p=4921665&postcount=278
followinginsanity said:
Confirmed... will work on it tomorrow.....
Click to expand...
Click to collapse
may not want to rush to get it working only for it to not work a few hours later...but ..like most people here...that probably won't stop many
I edited the build.prop file...and now it will only work with Sapphire builds. For CM builds, build.prop file that FollowingInsanity created
Code:
c:\android\tools> abd push c:\android\build.prop /system/
c:\android\tools> abd push c:\android\build.xxxx.prop /system/
Should be
Code:
c:\android\tools> adb push c:\android\build.prop /system/
c:\android\tools> adb push c:\android\build.xxxx.prop /system/
Takenover83 said:
Code:
c:\android\tools> abd push c:\android\build.prop /system/
c:\android\tools> abd push c:\android\build.xxxx.prop /system/
Should be
Code:
c:\android\tools> adb push c:\android\build.prop /system/
c:\android\tools> adb push c:\android\build.xxxx.prop /system/
Click to expand...
Click to collapse
Changed lol. thanks
where can i get the new maps apk? the old one fails to install
i get error
Failure [INSTALL_FAILED_UPDATE_INCOMPATIBLE]
ahronzombi said:
where can i get the new maps apk? the old one fails to install
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=4921092&postcount=196
That's the one I did, it also has all the needed files just grab the files from there and you should be able to use them for these instructions
ahronzombi said:
i get error
Failure [INSTALL_FAILED_UPDATE_INCOMPATIBLE]
Click to expand...
Click to collapse
When that happens you need to:
adb push <path to>/Maps.apk /system/app
adb shell
# install /system/app/Maps.apk
# exit
hey hey hey
could you or somone who got this to work try to make a video tuturiol on this so we can all clearly see how it works!!! please someone make an post it on youtube if possible thanks!!!!!!!!!
navigation doesn't work outside of the US at the moment right?
I was able to get the new maps.apk to install - and it is clearly a different application (with the new layers), but no navigate button. : (
seaweeduk said:
navigation doesn't work outside of the US at the moment right?
Click to expand...
Click to collapse
Nope, not until the big G says so.
mianosm said:
I was able to get the new maps.apk to install - and it is clearly a different application (with the new layers), but no navigate button. : (
Click to expand...
Click to collapse
what rom are you using?
mianosm said:
I was able to get the new maps.apk to install - and it is clearly a different application (with the new layers), but no navigate button. : (
Click to expand...
Click to collapse
You might have to try editing your packages.xml file even though it didn't give you an install error. Also, if you push your original build.prop's back, you lose navigation after a few hours. I guess the quick solution to that would be to keep the new build.prop's, but I'm not sure what the problems that might or might not create for other apps.
I'm using CM-4.2.3.1 with the edited build.prop and the build.sapphire.prop files.
# mount -o rw,remount /dev/block/mtdblock3 /system
Click to expand...
Click to collapse
A quick shortcut is to drop the device from this command. As you're re-mounting, the kernel knows the device name. Like this:
# mount -o rw,remount /system
Click to expand...
Click to collapse
Wow dude your the bomb, I did it a different way but it worked perfect. I just took a dount rom extracted it, deleted the maps.apk, then I took the droid dump maps app and put it into the donut rom. Then I made the changes to the build.trout.prop so that it recognized the g1 as the verizon phone, used your downloadable build.prop, of course I just deleted the original build.prop in the donut build, I resigned the donut rom, flashed it like it was brand new, and bingo everything worked perfectly. Wow good job dude. I would upload my rom but I dont want to get into any trouble.
I am using "AOSP1.6_r1.4+ADP DRD20 ROM". Maps on here is called "GoogleMaps.apk". I also do not have just a build.prop. I have a build.sapphire.prop and build.trout.prop. I modified both and replaced according to the first post. When I rebooted, GoogleMaps.apk was reinstalled, so I had to uninstall it again.
I did get the error described in post #8, but was able to get around it with the help of post #10.
But for some reason my network is completely down so I can't do nothing. Wifi and Cellular network. Hmmmm.
Edit: Replacing the files I backed up with the originals, brought my networks back.
I searched and got on IRC and can't get a fix for this. WHen i try to use the Fix permissions option in ROM Manager Premium i get the following error.
"error occurred while attempting to run privelaged commands"
I checked superuser and ROM Manager is in there so i selected "forget" then rebooted and tried "fix permissions" again. I got the promp to allow SU and then the error.
Any idea how i can fix this? Is this a bug or a isolated problem?
Not sure if it is related or not but I had to same problem until I bought the full version off of the market.
Maybe it's part of the extended functionality?
As I noted I have "Rom Manager Premium" I don't think it's related anyway.
Just found the answer to this (as I too was having this problem). See the link below:
http://androidforums.com/899973-post26.html
It has to do with busybox not installed in the correct place.
One more thing: Make sure that busbox is set to "755" so that it can execute.
Thanks
sw99 said:
Just found the answer to this (as I too was having this problem). See the link below:
http://androidforums.com/899973-post26.html
It has to do with busybox not installed in the correct place.
One more thing: Make sure that busbox is set to "755" so that it can execute.
Click to expand...
Click to collapse
Thanks for the link to the fix!
I am unable to get the busybox file to copy from the /data.... directory into the /system/bin/ directory. Any ideas?
jtoole1 said:
I am unable to get the busybox file to copy from the /data.... directory into the /system/bin/ directory. Any ideas?
Click to expand...
Click to collapse
did you mount the system partition prior to trying this?
I'm also having an issue moving the file using root explorer. Any other ideas?
the_grobe said:
I'm also having an issue moving the file using root explorer. Any other ideas?
Click to expand...
Click to collapse
Yeah, same here. My problem is that I've never used Root Explorer before. At the top it says mounted as r/w (in the /system/bin directory) , but it won't copy the file using the Root Explorer program. When I click [Paste] it doesn't give me an error, but when I go and check the directory, the file is not there. I even tried refresh. Any ideas?
UPDATE: I have not solved the problem yet, but I did notice that the /system/bin directory that I am trying to copy to says "0K bytes available," which is probably why it won't copy. So I guess my (no copy) problem is due to my lack of understanding of the file structure of the DI.
UPDATE: I finally got it working. Here is what I did.
1. Boot phone into recovery
2. Push busybox from /sdk/tools folder to sdcard
Code:
adb push busybox /sdcard/busybox
adb shell
3. Installed busybox to /system/xbin
Code:
$ su
#export PATH=$PATH:/system/bin
#cd /system/xbin
# cat /sdcard/busybox > busybox
# chmod 06755 busybox
# busybox --install -s /system/xbin
# rm /sdcard/busybox
# exit
$ exit
4. Booted up phone, and ROM manager fixed permissions as per request.
Hope that helps.
Thanks. I appreciate your feedback. But it looks like I wasted my money again on a useless program like "Root Explorer." I was hoping that I wouldn't have to do all of that command line crap anymore after having rooted.
Does anyone know if there is a file manager out there that will push/pull files via cut/paste rather than using a seperate computer with a command line interface?
I don't think that there is going to be a program like that until we've got full NAND unlock.
the_grobe said:
I don't think that there is going to be a program like that until we've got full NAND unlock.
Click to expand...
Click to collapse
Is someone working on that? I believe the facts are, that the Unrevoked team knows how to do it...but they won't give us the means to do it. Probably because they think we'll shoot ourselves in the foot...and blame them...and they're probably right!
I can not do the cat command it tels me Cant create busybox, read only file system.
Any ideas????????????????
when i was modding widget locker i was using linda file manager free to cut and paste out of the system folder im gonna try it right now to fix this problem ill let u know if it works
I would like to set my phone to europe.pool.ntp.org becouse it's default northamerica.pool.ntp.org
How can I edit this file ? When I try to type adb shell to terminal it gives me an error message.
Thanks
Not development related moved to General
At first U must root R phone and then install Root Explorer. After that go to SYSTEM/ETC/
Here u need to edit GPS.CONF file and change NTP Server from northamerica.pool.ntp.org to europe.pool.ntp.org.
I hope that I help U m8.
Get write acces in system folder
I used the post I've quoted down here. After you have gained write acces in the system folder you can edit gps.conf!
octy said:
By default the /system is mounted in read-only mode.
With 'root' access you can change this.
First 'root' your phone with tutorial 'slumpolo' has provided at
the begining of this thread.
Then open a shell on your phone with adb
Code:
adb shell
Grant 'root' access with 'su' command and have a look of memory partitions
Code:
su
mount
In 'mount' command output, identify the partition on which /system was mounted.
In my phone it was '/dev/block/stl6'
Finally you can remount it to get read-write permissions on it.
But before be sure to be outside /system in the shell (by typing 'cd /' for example).
Code:
mount -o remount,rw /dev/block/stl6 /system
Do the modification you want..... BECAREFUL of want you do, you can damage your phone.
Set read-only mode again
Code:
mount -o remount,ro /dev/block/stl6 /system
Sorry I cannot made any snapshot for the moment, I can't use my phone.
Hope it can help you.
Click to expand...
Click to collapse
By the way, for Slovakia I think you can better change to sk.pool.ntp.org
Complete list of European NTP servers:
http://www.pool.ntp.org/zone/europe
Other area's:
http://support.ntp.org/bin/view/Servers/NTPPoolServers
LeoApollo said:
By the way, for Slovakia I think you can better change to sk.pool.ntp.org
Complete list of European NTP servers:
http://www.pool.ntp.org/zone/europe
Other area's:
http://support.ntp.org/bin/view/Servers/NTPPoolServers
Click to expand...
Click to collapse
I see, probably I can use also CZ, HU, AT, DE or SK or EU .. I've red that the best is with more sites.
"After you have gained write acces " How can I gain write access ? I have rooted - but Adb shell doesn't work, did I missed something ? Thaks
nastyba said:
"After you have gained write acces " How can I gain write access ? I have rooted - but Adb shell doesn't work, did I missed something ? Thaks
Click to expand...
Click to collapse
i think yes adb is for the PC. it is part of the android sdk tools.
i did that on my desire (it should be same) but i have problem i edit and save file and now i cant see it
i can see that backup file but how do i restore it?
i tried create new file it wont work i cant see it (it says file created sucessfuly)
aantdesign said:
At first U must root R phone and then install Root Explorer. After that go to SYSTEM/ETC/
Here u need to edit GPS.CONF file and change NTP Server from northamerica.pool.ntp.org to europe.pool.ntp.org.
I hope that I help U m8.
Click to expand...
Click to collapse
U can use adb on Win or linux or qtadb.
Give these commands on adb shell..
su
mount -o remount,rw /dev/block/stl6 /system
exit
exit
adb pull /system/etc/gps.conf
Edit the gps.conf the way u like.
Then mount again in rw mode.
adb push gps.conf /system/etc/gps.conf
adb reboot
Done.
moved
new post @sgs2
nastyba said:
I would like to set my phone to europe.pool.ntp.org becouse it's default northamerica.pool.ntp.org
How can I edit this file ? When I try to type adb shell to terminal it gives me an error message.
Thanks
Not development related moved to General
Click to expand...
Click to collapse
U can use the apo "FasterFix" from market.
arunmcops said:
U can use the apo "FasterFix" from market.
Click to expand...
Click to collapse
Thanks for the tip much easier to change with this application done in seconds
The guide for deodexing SGSII (http://forum.xda-developers.com/showthread.php?t=1113937) works also for SGS+ (rooted of course).
I used xUltimate version v.2.3.1 for successful deodexing of rooted I9001XXKP4 ROM.
Hello
I only know deodexing merge *.apk and *.odex files.. What will i get if i deodex my rom ? Run faster ?
XER0123 said:
Hello
I only know deodexing merge *.apk and *.odex files.. What will i get if i deodex my rom ? Run faster ?
Click to expand...
Click to collapse
Deodexing actually makes the ROM a bit slower (at least on the first boot). The main advantage is that it makes customization (themes, icons etc.) easier.
The UOT Kitchen claims to support also odexed stock ROMs (and now also TouchWiz ROMs), has anyone tried it with SGS+? (worked fine with my deoxeded ROM).
Maigel said:
Deodexing actually makes the ROM a bit slower (at least on the first boot). The main advantage is that it makes customization (themes, icons etc.) easier.
The UOT Kitchen claims to support also odexed stock ROMs (and now also TouchWiz ROMs), has anyone tried it with SGS+? (worked fine with my deoxeded ROM).
Click to expand...
Click to collapse
I tried with my odexed rom and it works.
I'm stuck on
* Checking Phone ROM Build.... *
* Waiting for Phone... *
I have Android SDK and JDK installed. Ideas?
Thanks
karo_96 said:
I'm stuck on
* Checking Phone ROM Build.... *
* Waiting for Phone... *
I have Android SDK and JDK installed. Ideas?
Thanks
Click to expand...
Click to collapse
Oh, I forgot to enable USB Debugging. Now all is okey, but I can't copy folders to internal sd
Thanks in advance
karo_96 said:
Oh, I forgot to enable USB Debugging. Now all is okey, but I can't copy folders to internal sd
Thanks in advance
Click to expand...
Click to collapse
The phone is connected to PC in mass storage mode? You should see (at least in Windows) internal SD mounted as normal removable disk and then you can just copy & paste those folders from your PC.
If you're satisfied with UOT Kitchen possibilities and have no plans for other customization then you don't gain much by deodexing.
Okey, thanks, but when I write "adb shell" in cmd it returns
'adb' is not recognized as an internal or external command,
operable program or batch file.
karo_96 said:
Okey, thanks, but when I write "adb shell" in cmd it returns
'adb' is not recognized as an internal or external command,
operable program or batch file.
Click to expand...
Click to collapse
Locate your adb.exe (you did install Android SDK didn't you) and add it to your PATH (or execute <install dir>\abd.exe).
Maigel said:
Locate your adb.exe (you did install Android SDK didn't you) and add it to your PATH (or execute <install dir>\abd.exe).
Click to expand...
Click to collapse
Oh, Thanks, this step is now ok, but still not working :S
When I write cp /sdcard/done_app/* /system/app/ in cmd, it returns "Permision Denied"
is the UOT kitchen working on galaxy i9001?
awesome, i'm going to check it out now!
karo_96 said:
Oh, Thanks, this step is now ok, but still not working :S
When I write cp /sdcard/done_app/* /system/app/ in cmd, it returns "Permision Denied"
Click to expand...
Click to collapse
You need to execute these commands first as adviced:
su
stop
mount -o remount rw /system
Maigel said:
You need to execute these commands first as adviced:
su
stop
mount -o remount rw /system
Click to expand...
Click to collapse
Yes, but look the screenshot: http://img851.imageshack.us/img851/9163/screenshotpgd.png
karo_96 said:
Yes, but look the screenshot: http://img851.imageshack.us/img851/9163/screenshotpgd.png
Click to expand...
Click to collapse
Can someone help me?
karo_96 said:
Can someone help me?
Click to expand...
Click to collapse
When you enter the 'su' command first time via adb shell, you have to check the phone screen - the Superuser app is requesting permission for the command (and you'll have to grant it of course to continue).
i tried to deodex my device
but somehow i stuck on the last step
Code:
adb shell
$ su
# stop
# mount -o remount rw /system
# rm /system/app/*.odex
# rm /system/framework/*.odex
# cp /sdcard/done_app/* /system/app/
# cp /sdcard/done_frame/* /system/framework/
# mount -o remount ro /system
# reboot
when i try to enter " cp /sdcard/done_app/* /system/app/ "
a message shows up: cp: not found
well after that my phone starts into a bootloop
any suggestions how to solve this cp: not found ??
Blumdum said:
when i try to enter " cp /sdcard/done_app/* /system/app/ "
a message shows up: cp: not found
well after that my phone starts into a bootloop
any suggestions how to solve this cp: not found ??
Click to expand...
Click to collapse
Install Busybox first (Busybox installer can be found from Market)?
i had busybox on my phone as far as i know
Blumdum said:
i had busybox on my phone as far as i know
Click to expand...
Click to collapse
Maybe you have installed it in a way that no symbolic links to commands have not been created? Does "/system/xbin/busybox cp" work?
i installed it like 10 min ago
and this " /system/xbin/busybox cp " works
tomorrow i try it again to deodex my device
edit:
thanks not it worked
The official CWM has problems in mounting SD-EXT, thus, Jaggyrom and other custom roms (except stock) won't work properly and your phone will reboot everytime you install apps. You'll also get a lot of app crashes because Dalvik cache can't move properly. Now here's how to flash back to Yannou90's recovery using only Android Terminal Emulator.
__________
THINGS YOU NEED:
1. Your HTC Explorer must be rooted
2. Flash_image and Recovery (You can download it here on this thread)
3. Root File Explorers (Like Root Explorer and ES File Manager, at play store)
STEPS:
1. Download the zip file, read the readme inside the zip, and extract flash_image and recovery.img to the root of your SD Card
2. Download Root Explorer from play store, you can use ES file explorer if you want a root file explorer for free
3. Using your root explorer, copy flash_image to /system/bin/ but before you do that, make sure you mount /system/bin/ as R/W.
4. After copying flash_image, set flash_image permissions to rwxrwxrwx
5.Download Android Terminal Emulator on Play store
6. Run Terminal Emulator and open up preferences.
7. at the initial command, put this:
export PATH=/system/bin:$path
7. Go back to Terminal and Type su
8. Superuser should prompt. Accept it.
9. If you saw # it means you are running it as root, which is that we really needed. If you saw $ , it's not running as root and do type su again.
10. now type this:
flash_image recovery /sdcard/recovery.img
11. Wait for it and if it's done, boot your phone to recovery.
12. CONGRATULATIONS AND YOU ARE BACK TO YANNOU90's RECOVERY
DOWNLOAD LINK:
Flash_Image and Recovery.zip
mrchezco1995 said:
......
2. Flash_image and Recovery (You can download it here on this thread)
......
Click to expand...
Click to collapse
Sorry, on trying to download the following message shows up.
"The page you have requested does not exist. Please check your spelling and try again."
Can you please re-upload the Flash_image and Recovery.zip ?
Download link 404..
Sent from my HTC desire_HD using xda app-developers app
beegeevee said:
Sorry, on trying to download the following message shows up.
"The page you have requested does not exist. Please check your spelling and try again."
Can you please re-upload the Flash_image and Recovery.zip ?
Click to expand...
Click to collapse
Deivi_Z said:
Download link 404..
Sent from my HTC desire_HD using xda app-developers app
Click to expand...
Click to collapse
Download link fixed. Uploaded it to mediafire instead. Thanks for reminding guys.
permission denied
followed all the steps....still got the "Permission Denied" message
followed all the steps....still got the "Permission Denied" message
Click to expand...
Click to collapse
Check superuser and make sure Terminal is allowed. And type su in all lowercase, not uppercase like SU. That wont work
Sent from my HTC Explorer using XDA
mrchezco1995 said:
The official CWM has problems in mounting SD-EXT, thus, Jaggyrom and other custom roms (except stock) won't work properly and your phone will reboot everytime you install apps. You'll also get a lot of app crashes because Dalvik cache can't move properly. Now here's how to flash back to Yannou90's recovery using only Android Terminal Emulator.
__________
THINGS YOU NEED:
1. Your HTC Explorer must be rooted
2. Flash_image and Recovery (You can download it here on this thread)
3. Root File Explorers (Like Root Explorer and ES File Manager, at play store)
STEPS:
1. Download the zip file, read the readme inside the zip, and extract flash_image and recovery.img to the root of your SD Card
2. Download Root Explorer from play store, you can use ES file explorer if you want a root file explorer for free
3. Using your root explorer, copy flash_image to /system/bin/ but before you do that, make sure you mount /system/bin/ as R/W.
4. After copying flash_image, download Android Terminal Emulator on Play store
5. Run Terminal Emulator and open up preferences.
6. at the initial command, put this:
export PATH=/system/bin:$path
7. Go back to Terminal and Type su
8. Superuser should prompt. Accept it.
9. If you saw # it means you are running it as root, which is that we really needed. If you saw $ , it's not running as root and do type su again.
10. now type this:
flash_image recovery /sdcard/recovery.img
...
After this step what I get is as follows
usage: flash_image partition file.img
sh-3.2#
Click to expand...
Click to collapse
Superuser worked fine on terminal. But also got permission denied on last command in terminal.. should I push it via ADB?
You can simply flash the recovery using fastboot. Download this ZIP: http://forum.xda-developers.com/attachment.php?attachmentid=913094&d=1329843100 (courtesy of jaggyjags), start your phone in fastboot mode (ROM Manager might be able to reboot your phone into this mode, otherwise just turn it off, pull out the battery and replace it, then turn on while holding volume down and choose "FASTBOOT" from the menu that appears), then run "recovery.bat" from inside the ZIP. It's simpler than having to mess with adding files to /system/bin.
FYI, you need to set permissions on flash_image to allow it to be executed. I think typing this in the terminal emulator should work:
Code:
chmod 777 /system/bin/flash_image
(otherwise use your file manager to change the permissions to give read, write and execute permissions to all users i.e. tick all the boxes). This is the missing step from your guide to make it work from terminal emulator.
Also, you don't need multiple apps, you can just use terminal emulator for it all by using the "cp" command e.g. if flash_image is on the root of your SD card, use the following commands:
Code:
su
mount -o remount,rw -t yaffs2 /dev/block/mtdblock3 /system
cp /sdcard/flash_image /system/bin/flash_image
then use the chmod command above and then the original command from the first post.
[BTW, if you're wondering, the first command identifies as root, the second remounts /system as RW, the last copies the file]
So the full process for terminal emulator ONLY, would be this:
Code:
su
mount -o remount,rw -t yaffs2 /dev/block/mtdblock3 /system
cp /sdcard/flash_image /system/bin/flash_image
chmod 777 /system/bin/flash_image
flash_image recovery /sdcard/recovery.img
{rm /sdcard/flash_image
rm /sdcard/recovery.img}
The commands in the {} are optional and just delete the two files from your SD card. The 2nd and 3rd commands can be excluded if you copy flash_image with a root capable file manager, as can the 4th if you change permissions with the file manager.
(This post ended up being much longer than I originally intended. I was just going to post the first paragraph, but figured I may as well post how to make it work the way the OP described as well - or at least what I think should make it work, I haven't actually tested the full process [I have tested the exact same process with other binaries {viewmem, tcpdump} and it works perfectly. Provided the usage of flash_image as in the OP is correct and works, this method will work])
EDIT: You also shouldn't have to change the initial command, /system/bin is already specified in $PATH. If it wasn't, pretty much nothing on the phone will work.
SifJar said:
You can simply flash the recovery using fastboot. Download this ZIP: http://forum.xda-developers.com/attachment.php?attachmentid=913094&d=1329843100 (courtesy of jaggyjags), start your phone in fastboot mode (ROM Manager might be able to reboot your phone into this mode, otherwise just turn it off, pull out the battery and replace it, then turn on while holding volume down and choose "FASTBOOT" from the menu that appears), then run "recovery.bat" from inside the ZIP. It's simpler than having to mess with adding files to /system/bin.
FYI, you need to set permissions on flash_image to allow it to be executed. I think typing this in the terminal emulator should work:
Code:
chmod 777 /system/bin/flash_image
(otherwise use your file manager to change the permissions to give read, write and execute permissions to all users i.e. tick all the boxes). This is the missing step from your guide to make it work from terminal emulator.
Also, you don't need multiple apps, you can just use terminal emulator for it all by using the "cp" command e.g. if flash_image is on the root of your SD card, use the following commands:
Code:
su
mount -o remount,rw -t yaffs2 /dev/block/mtdblock3 /system
cp /sdcard/flash_image /system/bin/flash_image
then use the chmod command above and then the original command from the first post.
So the full process for terminal emulator ONLY, would be this:
Code:
su
mount -o remount,rw -t yaffs2 /dev/block/mtdblock3 /system
cp /sdcard/flash_image /system/bin/flash_image
chmod 777 /system/bin/flash_image
flash_image recovery /sdcard/recovery.img
{rm /sdcard/flash_image
rm /sdcard/recovery.img}
The commands in the {} are optional and just delete the two files from your SD card. The 2nd and 3rd commands can be excluded if you copy flash_image with a root capable file manager, as can the 4th if you change permissions with the file manager.
(This post ended up being much longer than I originally intended. I was just going to post the first paragraph, but figured I may as well post how to make it work the way the OP described as well - or at least what I think should make it work, I haven't actually tested the full process [I have tested the exact same process with other binaries {viewmem, tcpdump} and it works perfectly. Provided the usage of flash_image as in the OP is correct and works, this method will work])
EDIT: You also shouldn't have to change the initial command, /system/bin is already specified in $PATH. If it wasn't, pretty much nothing on the phone will work.
Click to expand...
Click to collapse
Thank You. U completed this thread. Decided to use fastboot (faster) instead of terminal emulator way.
SifJar said:
You can simply flash the recovery using fastboot. Download this ZIP: http://forum.xda-developers.com/attachment.php?attachmentid=913094&d=1329843100 (courtesy of jaggyjags), start your phone in fastboot mode (ROM Manager might be able to reboot your phone into this mode, otherwise just turn it off, pull out the battery and replace it, then turn on while holding volume down and choose "FASTBOOT" from the menu that appears), then run "recovery.bat" from inside the ZIP. It's simpler than having to mess with adding files to /system/bin.
FYI, you need to set permissions on flash_image to allow it to be executed. I think typing this in the terminal emulator should work:
Code:
chmod 777 /system/bin/flash_image
(otherwise use your file manager to change the permissions to give read, write and execute permissions to all users i.e. tick all the boxes). This is the missing step from your guide to make it work from terminal emulator.
Also, you don't need multiple apps, you can just use terminal emulator for it all by using the "cp" command e.g. if flash_image is on the root of your SD card, use the following commands:
Code:
su
mount -o remount,rw -t yaffs2 /dev/block/mtdblock3 /system
cp /sdcard/flash_image /system/bin/flash_image
then use the chmod command above and then the original command from the first post.
So the full process for terminal emulator ONLY, would be this:
Code:
su
mount -o remount,rw -t yaffs2 /dev/block/mtdblock3 /system
cp /sdcard/flash_image /system/bin/flash_image
chmod 777 /system/bin/flash_image
flash_image recovery /sdcard/recovery.img
{rm /sdcard/flash_image
rm /sdcard/recovery.img}
The commands in the {} are optional and just delete the two files from your SD card. The 2nd and 3rd commands can be excluded if you copy flash_image with a root capable file manager, as can the 4th if you change permissions with the file manager.
(This post ended up being much longer than I originally intended. I was just going to post the first paragraph, but figured I may as well post how to make it work the way the OP described as well - or at least what I think should make it work, I haven't actually tested the full process [I have tested the exact same process with other binaries {viewmem, tcpdump} and it works perfectly. Provided the usage of flash_image as in the OP is correct and works, this method will work])
EDIT: You also shouldn't have to change the initial command, /system/bin is already specified in $PATH. If it wasn't, pretty much nothing on the phone will work.
Click to expand...
Click to collapse
Mine worked for me on terminal without any problems, but thanks for filling up what I just missrf for others. Hehe
Sent from my HTC Explorer using XDA
mrchezco1995 said:
10. now type this:
flash_image recovery /sdcard/recovery.img
11. Wait for it and if it's done, boot your phone to recovery.
]
Click to expand...
Click to collapse
I did upto this point when I write and enter this string nothing happens it gives me another sh-3.2# to write in. How would I know that the Yannou90 recovery has completed??? I'm stuck
SherazHashmi said:
I did upto this point when I write and enter this string nothing happens it gives me another sh-3.2# to write in. How would I know that the Yannou90 recovery has completed??? I'm stuck
Click to expand...
Click to collapse
Why don't you try step 3 from jaggyjag's rooting tutorial....
Sent from my HTC Explorer A310e using xda app-developers app
My HTC Explorer's recovery was stuck green logo, but what thing that helped to get back my clockword recovery
is just downloading you recovery file and renamed it recovery.img
And...
I used Android SDK tool, and used the below command in command prompt and then I reboot the mobile, and I got back:
fastboot flash recovery recovery.img
Thanks for this valuable thread
SU not found !
after changing the INITIAL COMMAND
i restarted d terminal and now the initial command just gets printed and after that i typed 'su'...d output was 'su not found'..
wats d problem ???
I even tried d fastboot method...dats epic, whenever i try to install any .zip from it dis is wat i see
"Installing update...
Installation aborted."
Plz suggest nythng else other than REFLASHING it...its just that sumthng is restricting it to install :laugh:
hi! I have a question regarding recoveries... i have a recovery by yannou90 installed on my htc explorer, will this recovery work for other roms such as CM9 and CM10? It worked well with JaggyJags rom (3.2.1).. i am wondering if I need to switch to other recovery prior to installing CM roms.. thanks!
iamwin said:
hi! I have a question regarding recoveries... i have a recovery by yannou90 installed on my htc explorer, will this recovery work for other roms such as CM9 and CM10? It worked well with JaggyJags rom (3.2.1).. i am wondering if I need to switch to other recovery prior to installing CM roms.. thanks!
Click to expand...
Click to collapse
Yeah, ll work for all rom installation...
Hit :thumbup: if i helped...
R. SAINT said:
Yeah, ll work for all rom installation...
Hit :thumbup: if i helped...
Click to expand...
Click to collapse
got it man!
the steos for flashing the recovery worked for me but after 2 weeks now it responds to nothing when i try to wipe dalwik cache or perform any other funtion it displays nothing only the green title saying yonnou90 recovery.
Mayank T said:
the steos for flashing the recovery worked for me but after 2 weeks now it responds to nothing when i try to wipe dalwik cache or perform any other funtion it displays nothing only the green title saying yonnou90 recovery.
Click to expand...
Click to collapse
My initial response to such a situation would be start the phone in fastboot mode and then flash the recovery from there. Download the ZIP here: http://forum.xda-developers.com/attachment.php?attachmentid=913094&d=1329843100, extract it and double click "recovery.bat" once the phone is in fastboot mode (start phone holding volume down, select fastboot from menu instead of recovery).
This assumes you're on Windows. If you're on Mac/Linux, find the fastboot binary for your platform and run the following command in a terminal:
Code:
./fastboot flash recovery recovery.img
where recovery.img is taken from the ZIP I linked above.
Alternatively, you could install a more up-to-date recovery such as TWRP or a newer build of CWM (not sure of links for the latest versions of either, but have a look around the forum and you should find them. Also some older builds of CWM had bugs [hence this thread exists], but I think the newer builds work fine on the Explorer; not 100% sure as I still use yannou90's build)