It is not made by me.I just transmit it.
If the devolpers think it is not right to post it here,pls tell me.I apologize and I will delete it.Thanks!
It comes from here:http://www.movilzona.es/foro/superaosp-para-dream-magic-por-super-tmel-tolemac-t4909.html#unread
I don't know spanish and my english is not very good.So maybe something I can't
express the meaning totally.
I have flashed the rom,it runs fast and very good.
In my opinion,it is better than any gingerbread ever.
download: http://cdn.movilzona.es/repos/superatmel/ROMS/SuperAosp/[email protected]
kernel:http://www.megaupload.com/?d=QGHIA6D9
The kernel is for the USB bug.
request:
1.radio:2.22.27.08/2.22.28.25;
2.partation your sd card:swap(64M+),EXT4(AT LEAST 256M),FAT32
steps:
1.download the rom and the kernel,put them into your sd card;
2.boot into recovery;
3.wipe your device;
4.flash the rom,then flash the kernel;
5.reboot your device,it may take a few minutes to get into the system.
attention:
if you check the storage,you will find it is about 40M only.
follow the steps below:
settings”->“SupSetup”->“Options（maybe Opciones）”->“App2SD CompCache y Linux Swap”->choose "App2SD"and "Linux Swap".Then the device will reboot itself,if not,reboot it.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
check the storage again,you will find it is about 90M.
There maybe something I didn't mentioned.Test it yourself.
Thanks to the developer--blerfont.
[/IMG]
Hello everyone. We already have new version, changes are not important and does not give solution to a fault.
On the question of tone, after much debugging code, search the Internet for the problem, found a
reference in the incident management system of cyanogen and SURPRISE, the solution is to make a good wipe.
I personally like both the 6.0 version 2.8.2, I did a wipe of SD card, ie I did not delete the directories. Android_secure, Android and data (Yes I know they always say it is important to remove them and if not is the ROM may not work well) and of course that it can not function properly, which ultimately is always test the ROM with those.
At the end deleting and reinstalling the ROM the problem is resolved, so it must be said that no problems with the tones.
Here is how the installation
Steps:
1 .- Install only from SuperAosp SuperAosp 6.0 or 6.0.1.
2 .- DO NOT WIPE . Although it would be appropriate to make a backup just in case.
3 .- This version is tested with HTC Magic hack plate 32b and 15-meg.
4 .- Restart in recovery mode and install the downloaded file. zip.
NEWS from version 6.0.1
- Full support for Polish.
- New translations into Spanish.
- Compact bar notifications.
- Removed support for NFC.
Download: http://cdn.movilzona.es/repos/podxboq/roms/SuperAosp-DS-6.2.zip
Performance Statistics:
Data obtained with the following configuration:
App2SD: On
Swap: On a 32 Mb
Governor CPU: OnDemand
Min CPU Frequency: 245 MHz
CPU Max Frequency: 528 MHz
Compcache: On 18%
Jit: On
Release RAM: On
Launcher in memory: On
SuperAosp 8.0, Rom Based on Open Source Android Gingerbread
Special thanks to the creator of the item inexus from which I have been inspired to give a graphic touch to the rom.
This rom (not a mod) has been developed entirely from the source of Google and very little of Cyanogen framework.
Thanks to Cyanogen and all his staff (especially RMCC) for the contributions received.
Is installed from the recovery, as always, do not worry if it takes a while to leave the first splash is entirely normal and configuration files running on first boot. I strongly recommend formatting SDCARD total with three partitions, SDCARD 7.4 GB / EXT3 512MB / 64MB LinuxSwap, This is only necessary in case you want to have Apps2sd or Linux Swap, if not going to do any of those things is not Sdcard necessary to format with three partitions.
] ATTENTION!
This rom installs itself alone, that is completely reconfigures.
Before installing the rom Wipe recommend because it has many changes. When installed and out of recovery restarting while leaving untouched the white LED flashes. Being torn white LED stays on for about 6 minutes, then turn off. This second time is not necessary to expect too for messing with the rom. At this point I recommend you salteis the account settings to skip giving google and once in the launcher and set podreis rom to your liking. This is because otherwise the phone will Autoconnect the market and begin to automatically download all the applications you had installed and it saturates the terminal because it does hit, besides putting the background image that you had prior to the rom and then you ask me that as it is possible that if I install the rom to wipe the bottom appears to me that I had before. In this way you will do a clean install. Then you enter the market and instalais a free application to refresh anyone that you have installed in the terminal. Very attentive to you to do restorations of any kind against the rom or program that you can have problems. (I mean backups, including their own SupSetup least in the section on applications), special attention to restore configuration data of any kind. Under the best not to doubt.
SupSetup new V20 in all Supert @ am, does not serve any previous SupSetup for this rom. The new integrated SupSetup activation brings on-demand applications in the applications section extras, you can enable applications that interest you as the Roma comes in "Lite" (without extra applications installed) so that everyone can choose the best configuration.
It is important before you set up Google account to be activated from applications before SupSetup so that when you connect to the servers to configure your Google account, they enter the downloads section. After entering the market and to display applications install any application downloads for cool downloads.
** Apps2sd
Apps2sd is to pass the phone applications both current and future to the ext3 partition, it is imperative not to activate any way to move application to the sd or change from internal to external location application. Simply activate it from the SupSetup without touching any configuration in the Spare Parts or applications from the rom settings.
Apps2sd not activate without at least once you have restarted
General
- Rom in "LITE"
- New graphical look
- New option in the extras Applications SupSetup
- You can add gestures from the Spare Parts
- Added Development (Off from SupSetup)
- Added provider sim STK (Off from SupSetup)
- Added File Explorer from the SupSetup (Off from SupSetup)
- Terminal (Available from SupSetup)
- Added news and weather
- Now you can customize the toolbars notifications from the Spare Parts.
- Control the music in the lockscreen activated from the Spare Parts
- Many improvements and funny Spare Parts for the control of the rom.
- You can modify all the colors of the rom including notification bar (text notifications, time and date)
- Now applied directly SupSetup changing CPU frequency
- You can install more from the extra applications SupSetup
In 8.4
- New Maps 4.6.0
- New Youtube
- Various internal improvements
- New Wallpapers
- Fix 3D Gallery
- Bluetooth Fix
http://cdn.movilzona.es/repos/superatmel/ROMS/SuperFroyo-MVZ-MD-8.4.zip
In 8.2
- New graphic look
- ADWLauncher 1.2.0
- Caching of 3D Gallery
- Power Widget
- Post-Installation Issue
- Updated application
- Small internal tweaks to improve coverage in areas with poor 3G
* SuperAosp 8.0
- Integration in Android 2.3.4
- New Graphics
- Improved coverage, but it is important to do this before:
Get the SupSetup, Parts, Interface, Widgets for service, Widget buttons, modes 2G/2G network and activate G +3
- New Launcher
* SuperAosp 6.2
- Solution to the tables in texts
- Implemented operating in compact mode (default) is changed in the parts, interface
- New transitions and animations (only HDPI)
* SuperAosp 6.0
- Lots of changes in framework for stability
- Gallery now supports screen rotation without having activated
- Contacts and Phone allows landscape mode
- Added control adlx Romstats of people who use the roms in different version. completely transparent. You can see from here http://adlx.net84.net/stats.php
- Reissue of how to address issues to avoid problems when applied
- Now the status bar can be put down as in the tablets. From integrated SupSetup Spare Parts
- Added Advanced Settings Widgets
- Improved wireless internet access in some routers polemic
- Added battery issues
* SuperAosp 4.8
- Added boot sound is disabled from SupSetup advanced.
- Improvement of framework
- New battery.
- Improving the management of WiFi.
Note: The first sound is the sneak rom installation, let it ring until the end. Then reboot.
This sound can be changed by you will. And explain how.
* SuperAosp 4.6
- Fixed status bar disappears when you change the subject
- Fixed View Topic
- New issue of batteries (Aura)
- Fixed CPU frequencies from SupSetup (parts)
* SuperAosp 4.4
- Rotation in launcher
- SupSetup translated into English (XDA)
* SuperAosp 4.2
- Added battery issues with a percentage from 0 to 100 and normal subject
- New translations
- Different treatment of bluetooth
- Fixed small bugs
* SuperAosp 2.8.8
- Added DSPManager
- New source
- Added transparency
- Fixed bug in backups SupSetup (tolemaC)
- Fixed bug when switching between chat Gtalk
- Fixed bug in keyboard
- Some digital retouching
- Disabled by default when you install data rom to wipe
- Less time to show incoming calls
- Etc ...
* SuperAosp 2.8.4
- Type of browser built
- Private mode in the integrated browser
* SuperAosp 2.8.2
- Added configurable lockscreen
- Fixed delete button calculator
- Optimization of profiles
- Improved automatic brightness control
- New Google apps
- Fixed a ext4 partition detection.
- Implemented 2.3.3 r_2
* SuperAosp 2.6
- Added ADWLauncher
- Integration into Full 2.3.3
- I recommend the EX ADWLauncher new vertical mode
* SuperAosp 2.2
- Upgrade to version 2.3.3
- Fixed installation of applications, such unreason Angry birds error -18
http://cdn.movilzona.es/repos/superatmel/ROMS/SuperAosp/SuperAosp-ST @-ONE-8.0.zip
this is really awesome
really an awesome ging. ROM.
I'm not a coder, so I don't know how the fuction of prevent FCs works.
Just now installed will update the comments soon
It's a perfect ROM.THX.Awesome
LOL! I see someone finally decided to throw this ROM in to the mix. I thought about it, but like the OP (edward0119) I didn't want to take the credit.
Yes, it is a great ROM, lighting fast in my experience. I have been using this ROM for at least a few months now. No issue what so ever.
More thing to add to the OP:
Download Launcher: GO Launcher EX (because the build-in ADW Launcher not working too well)
Radio: 2.22.27.08 / SPL: 1.33.0013d (Will work with this radio and SPL combo)
You can also format your SD card if your SD card is 8GB (Catch [128MB]/Ext 2/3/4 [1024MB]/ FAT32[the rest]), I found out that it works best.
Hows the batery life on this rom?
canizares said:
really an awesome ging. ROM.
I'm not a coder, so I don't know how the fuction of prevent FCs works.
Click to expand...
Click to collapse
Try running the "Fix Permissions" option from "ROM Manager".
dilwaladoctor said:
Hows the batery life on this rom?
Click to expand...
Click to collapse
Fairly good, it will also depends on what you are using it for. Mine stay up for about 2 days time for a regular usage (IE: phone call, texting, wifi usage). You might have to do a battery flush in the recovery a few time to clear out the status.
sada23 said:
Try running the "Fix Permissions" option from "ROM Manager".
Click to expand...
Click to collapse
DO NOT use ROM Manager, it not good from my experience. But if you are use it a your own risk. It screwed up you ROM (at least from my past experience with the other CM6.0 ROM).
will this work on htc magic 32A.......if yes then what radio n spl??
htcmg2 said:
will this work on htc magic 32A.......if yes then what radio n spl??
Click to expand...
Click to collapse
I am assuming it is, and it should take tke same radio and SPL. But then I do not have the HTC Magic 32A.
Use terminal and type-
su (press enter and accept super user request)
fix_permissions (enter)
Then let it do its thing.
Sent from my Mytouch 1.2 using XDA Premium App!
Thanks been hearing lots of great stuff about this rom will flash it today and see if it holds up
@edward0119
Remember that the original Post Movilzona.es says this:
Aclaración:
NO se va a dar ningun tipo de soporte a esta rom desde cualquier foro distinto a este, esto viene a que es muy comun que la gente la cuelgue en otro foro y luego tenga que estar buscando donde se ha colgado ademas del foro principal y no puedo atender a peticiones externas de este tipo, porque no puedo estar en todos los sitios.
Me hace gracia que se hable mas de las roms desde otros foros que desde el principal desde la cual se ha colgado, ademas teneis que pensar que esto no seria posible si no existieran foros como este desde el cual me prestan terminales para que todos disfrutemos de roms variadas.
Click to expand...
Click to collapse
P.-D.-... It never hurts: Google translator
@ d12unk13astard - Have fun, I'm pretty sure you'll love this ROM.
@ Trebol02 - Yep, my browser automatically use Google Translate and It was great.
canizares said:
really an awesome ging. ROM.
I'm not a coder, so I don't know how the fuction of prevent FCs works.
Click to expand...
Click to collapse
In the app "SupSetup" there is an option called "Let the Furze with you. " Activate it and restart.
Trebol02 said:
In the app "SupSetup" there is an option called "Let the Furze with you. " Activate it and restart.
Click to expand...
Click to collapse
You meant "May the force be with you".
@ canizares - Go to SupSetup Setting > Options
and select "May the force be with you" It will warn you for the FC extream problem, click on "OK". It will reboot and that is all.
BeenAndroidized said:
Download Launcher: GO Launcher EX (because the build-in ADW Launcher not working too well)
Click to expand...
Click to collapse
In the Post No. 5, the Original says this Topic:
After my tests, I would strongly recommend the use of EX ADWLauncher because it shows much lighter than normal ADWLauncher.
Click to expand...
Click to collapse
The propieo Tester and / or member of the Team recommended Ex. ADWLauncher
I get to use with that recommended and I was pretty good.
Very nice rom!
Sent from my Mytouch 1.2 using XDA Premium App!
Related
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
UPDATE 02/05/2011
Blur Launcher Added back by request (Blur widgets now working)
ADWLauncher Removed
Button Lights Fixed
MusicMod Lockscreen moded added
Blur music controls in locksreen tweaked a little (make sure Music Mod lockscreen is stopped)
system apps zipaligned(in case you wanted to do it again..)
Boot.img removed from nandroid (doesn't restore, flash 3.12 Brazil if you are running an older build)
Some scripts cleaned up
Etc
Version 2.0 is in the work based on 3.23, now with full traslation.
Download Here
Argen2stone 1.9
Mirrors
Argen2stone 1.9 Mediafire
Argen2stone 1.9 Multiupload
Argen2stone 1.9 Megaupload
Argen2stone 1.9 Chibani
IF YOU WANT TO MIRROR IT, PM ME THE LINK, SO I CAN TRACK THE DOWNLOAD COUNTS WITH MY BIT.LY ACCOUNT, Dropbox mirrors are not allowed
UPDATE 20/04/2011
Blur Launcher removed
ADW Launcher 1.3.6 ported from latest CM7 released (nadlabak's fixes included)
Added back some apks to get Motoblur social accounts working again(requested)
CM7 MMS replaces blur text messaging. Messaging moded redirected to CM7's MMS
MusicMod Lockscreen ported for Music from Argen2stone. Enable/disable the service in app drawer
Buil.prop changes:
windowsmgr.max_events_per_sec -> 65 scrolling optimized
dalvik.vm -> 48m stability
ro.mot.hw.dispbl.anim -> 1 Instant screen off with power key locking the phone
slow fps set to 90
ro.romversion increased to 3
debug.sf.hw -> 1 enables HW acceleration, better UI experience
Changes in scripts:
loaded smartass scaling governor
loaded conservative scaling governor
conservative governor set on boot as it is configured on init scripts.
sdcard read speed fix applied to init.rc loaded on boot
THIS NANDROID CONTAINS BOOT.IMG TOO, COMPATIBLE FOR ALL PHONES WITH OLDER BUILDS. AFTER RESTORING THE SYSTEM NANDROID GO TO ADVANCE RESTORE AND
CHOOSE RESTORE BOOT.IMG, AFTER APPLYING IT REBOOT. IF YOU GOT STUCK ON M LOGO MORE THAN 3 MINS, PULL YOUR BATTERY OFF, TURN ON, AND CHOOSE "REBOOT" IN CWM
Link: Argen2stone 1.8
Mirrors:
Argen2stone18ByChibani
Argen2stone18ByEvealex624shared
Mirrors are welcome
UPDATE 30/03/2011
Changelog:
-Deodexed again, with full Brazil apks.
-Added back 3G Hotspot and DLNA
-New theme BLURRED preinstalled, you can find it on the theme menu too. Based on Gingy's DX
-Gingerstone Rebuilt and moded music control lockscreen
-Honeystone with minor changes
-New bootanimation Honeycomb takeover, found here on XDA
-Bootsound preinstalled and enabled -> Tron Theme music
-2nd-init hack applied
-Folder init.d Liberty ROM's scripts ported 98% of them
-Script roottools updated:
*added Blurred to theme list, new options to enable/disable bootsound and change fps for fastmo an slowmo video recording on "set build properties"
*new option adjust init scripts:
-This menu is meant to make easier the config of init.d.conf(controller of init.d located on /data/liberty, so if you mess something just wipe):
-Dalvik VM Size*
-Enable clear cache on boot
-Change ring delay*
-Enable script firstboot on boot
-Enable fix permissions on boot
-Change WiFi scan period*
-Enable editprops on boot (this applies the values marked with * to build.prop )
-Set minimum memory (RAM)
-Change LCD density*
-Enable better scrolling speed*
-Enable overclock on boot (set the scaling in option 14)
-Black screen phone delay*
-Enable CWM on boot (choosing reboot you boot normally after the reboot to CWM)
-Adjust custom scaling frequencies (use the Stock vsel in table if you dont have idea)
-zipalign system apps on boot
-zipalign data apps on boot
*new option to download and change bootsound: currently 16...
-libs for MP3 playback changed with DX's thanks to Deadsix17
-Music player from Droid X visuals(100+ presets), audio effects and music control on lockscreen
-MusicMod apk is renamed to music.bak if you liked it on 1.0, doesn't support visuals, audio effects nor music controls on lockscreen
-build.prop fixed to show all your installed apps from the Market (thanks Jrummy)
-bash added to bin, type bash in terminal to start
-roottools symlinked, type allinone to skip download of latest roottools and start the menu
-Interactive Governor working. ONLY available with Overclock on boot enabled(any scaling).
-ro.modversion line added to build.prop, useful when i add updates for the rom via roottools
-more stuff i dont remember
Apply the same way as 1.0 and enjoy
Note: motoginger, blackdroid and gingerblue were not updated, but you can try them.
LINK: Argen2stone v1.5
Nice m8, hope you get your MS2 asap then we can enjoy the blurless rom
Thanks for the update.. even though blur is annoying the SetUP can now enable it lol..
No problem for the mirrors
Here's the baseband app:
http://db.tt/ftQX02i
PS: By the way, my overclock is 1.25Ghz @ 62 vsel (on Milestone Overclock app from market). Your vsel is higher (yours safer? mine is fine, still).
Sent from my Milestone 2 XDA App
Depends physically from the phone's processor. The table is not optimum but below 1250 is Ok.
downloading now
Hi,
Thanks a lot santiemanuel for your work on M2 !!!
Can you tell me if this ROM is only on spanish language or not ?
I want to test it but my spanish is very poor ...
Best [email protected]
Installing now ! Thanks!
EVEALEX62 said:
Hi,
Thanks a lot santiemanuel for your work on M2 !!!
Can you tell me if this ROM is only on spanish language or not ?
I want to test it but my spanish is very poor ...
Best [email protected]
Click to expand...
Click to collapse
Je n'ai pas le temps de tester... Si tu la testes tu pourra me dire si le clavier est bien en azerty ? Merci ^^
--
English : If you try this, could you tell me if the keyboard is AZERTY ? Thx
chibani said:
Je n'ai pas le temps de tester... Si tu la testes tu pourra me dire si le clavier est bien en azerty ? Merci ^^
--
English : If you try this, could you tell me if the keyboard is AZERTY ? Thx
Click to expand...
Click to collapse
Ok no problem and I'll do a report on http://forum.frandroid.com
FRANCAIS : Ok pas de soucis, je ferai un "rapport" sur http://forum.frandroid.com
Please stay english lol.. i already told him to translate the ROM.. And the rom has 3 languages i think brazil/english/spanish.. i use it in english
DeadSix17 said:
Please stay english lol.. i already told him to translate the ROM.. And the rom has 3 languages i think brazil/english/spanish.. i use it in english
Click to expand...
Click to collapse
Yes I see ... not FRA language .... clavier QWERTY ....
But very nice boot animation
DeadSix17 said:
And the rom has 3 languages i think brazil/english/spanish.. i use it in english
Click to expand...
Click to collapse
Hey DeadSix17
Are you saying that Argen2Stone is available in English??
Or Motorola's original ROM is available in three languages.
Sorry for pestering but it would be very difficult for me to use it unless its english so just clarifying.
EVEALEX62 said:
Yes I see ... not FRA language .... clavier QWERTY ....
But very nice boot animation
Click to expand...
Click to collapse
Have you tried with "More Locale" ?
chibani said:
Have you tried with "More Locale" ?
Click to expand...
Click to collapse
I don't find "More Locale" ..in "settings\Language & Keyboard" ?
I have installed it and there is English language, Spanish and Portuguese. It's a nice rom, fluid and good looking, nevertheless I've lost the hotspot app that was included in my original french rom and there's only Qwerty.
EVEALEX62 said:
I don't find "More Locale" ..in "settings\Language & Keyboard" ?
Click to expand...
Click to collapse
I ment this : https://market.android.com/details?id=jp.co.c_lis.ccl.morelocale
chibani said:
I ment this : https://market.android.com/details?id=jp.co.c_lis.ccl.morelocale
Click to expand...
Click to collapse
No does't Work ..
Great, first working ROM for our MS2, I think...
But kinda buggy and the install instructions... hrm.
So, here are my thoughts about this:
- Install instructions are kinda wired. I didn't take the challenge and did also do a factory reset before installing. So I can use a clean system.
- Facebook Sync doesn't work. I'm not able to add athe FB acc in Accounts... There's just no window popping up for logging in
- If I unlock to soon after booting up the system doesn't ask me for my PIN Code
- **** MOTOBLUR!
And what should I do with the build prop? Worked fine for me without replacing it.
001356 said:
Facebook Sync doesn't work. I'm not able to add athe FB acc in Accounts...
Click to expand...
Click to collapse
For me no problem with facebook...
001356 said:
And what should I do with the build prop? Worked fine for me without replacing it.
Click to expand...
Click to collapse
Same to you .. I have not replace it ...
Blur does not work if you dont replace the build.prop
ROM/SBF language doesnt matter you can only choose 1 of the three languages.. english/spanish/brazil (i think.. im not sure i dont even choosed them.. since i dont care about these languages.. but 100% theres english lol)
PS:
+Facebook works fine
-You have to put build.prop into /system/ to get Blur Setup working! (Only if you whiped..)
+More performance (atleast i noticed that!)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
---------------------------------------FUSIONideos INFOS---------------------------------------
Version: 2.7.10
Developer: FUSIONdev
Languages: All available on FROYO !
Release date: 3/10/2011 (day/month/year format)
ROM Android Froyo 2.2.2 ported and based on U8180C56B629 rom
UltraJack Recovery or CLOCKWORKMOD REQUIRED for install
THE FULL INSTALL WILL WIPE YOUR DATA, BACK UP EVERYTHING BEFORE FLASHING (I suggest a nandroid backup from recovery + a titanium backup) !!
Added software:
Link2SD (more info at: http://forum.xda-developers.com/showthread.php?t=919326 )
Google Car Home
No frills cpu control
FEATURES
DEODEXED - ZIPALIGNED - ROOTED - BUSYBOX
Custom tweaked kernel with Ext3, Ext4, CIFS support, OpenVPN tunneling support
Optional Link2SD technology (more advanced and selective than App2SD+ , with AUTOLINK option enabled works like app2sd+)
Optimal Ram management, with froyo's task killer tweaks
SD Read tweak
FUSIONboost for a better responsiveness of critical apps (new!)
FUSIONremix for keeping your system clean and updated (new!)
Circular battery indicator with %
Custom animations (Please activate on -> Display->Animations->All animations)
FIXED italian days translation on google weather
Regulatory domain (wifi channels choosing) enabled
Shutdown menu with Reboot and Recovery
Updated hosts file (for ad blocking on web navigation)
Updated Google Apps, Facebook and Market
Unlocked market (Thanks to Atl4ntis)
Short operators names for Italy
Updated apn list
Anti malware patch XDA PATCH
CPU underclocked @ 30 Mhz on idle (default)!
CPU overclock up to 748 Mhz (Choose the frequency using No frills cpu control)
Smartass governor by default
Interactive governor
Multitouch
Misc. Tweaks
About FUSIONboost:
a process renicer for your ideos! It will adjust priority of critical system apps for a better responsiveness!!
It also fixes the annoying screen on lag when the phone is ringing!
About FUSIONremix:
a simple script that will help to keep your ideos updated, clean and with free space. It moves automatically at boot time to the system partition any update of:
Gmail, Google Maps, Voice Search, Google Translate, Google Docs, Street View, Google Search, Facebook, Link2SD, No Frills CPU Control, Google Voice, Twitter, Google plus, QuickPic, Youtube, Google Books and File Expert so your Data partition will be kept clean without duplicates!!!!
It will also clean the dalvik cache for those apps, so no junk in your data partition!
You don't even need FUSION Extras Facebook package ! Just download it from the market, reboot...and Facebook will be pushed to the system partition!
About LINK2SD:
If you want to use Link2SD tecnology, you must partition first your sd from recovery or favorite partitioning software.
I recommend to backup SD first and then create a 512 MB partition. Do not create swap, is not useful.
---------------------------------------CHANGELOG---------------------------------------
FUSIONideos 2.7.10 - 3/10/2011 (day/month/year format)
-Updated Superuser (and su binary) to 3.0 - fixed issue with market not updating
-Kernel:
--Interactive governor is back
--Swap support is back
--Reduced battery drain
-fixed wifi issue (FUSIONideos 2.7.9 retired update)
FUSIONideos 2.7.8 - 23/9/2011 (day/month/year format)
Fixed updater script (2.7.7 errata)
FUSIONideos 2.7.7 - 23/9/2011 (day/month/year format)
-Updated Android Market 3.1.5
-Updated kernel (build #35)
--overclock up to 748 Mhz (no need anymore of kernel flavours)
--Removed interactive and userspace governor
--Minor kernel config changes
--Fixed (maybe) audio playback issues (Thanks to Bertans!)
-Updated adblock list
FUSIONideos 2.7.6 - 20/8/2011 (day/month/year format)
-Updated Android Market to the 3.0.27 version, now able to buy software.
FUSIONideos 2.7.5 - 19/8/2011 (day/month/year format)
FUSIONideos 2.7.5 UPDATER released !
-FUSIONremix v0.8
--Added support for QuickPic, Youtube, Google Books and File Expert
--Added support for libs moved by Link2SD
--Added License (GPLv3)
-FUSIONboost
--Added License (GPLv3)
-Updated Android Market to the latest official release - 3 - (the one added with Extras was unable to update itself, because it wasn't signed with the official keys)
FUSIONideos EXTRAS - 7/8/2011 (day/month/year format)
Added as FUSIONideos EXTRAS the Android Market 3
FUSIONideos 2.7.4 - 7/8/2011 (day/month/year format)
FUSIONideos 2.7.4 FULL & UPDATER available for download
FIXED the proximity sensor bug in call (bug report)
FUSIONremix v0.7
-added support for: Google Voice , Twitter and Google plus
--FOR UPDATER: if you encounter a boot loop, please Wipe your dalvik cache from recovery. If you use Link2SD, at the first boot make "Link dalvik-cache files".
FUSIONideos 2.7.2 - 4/8/2011 (day/month/year format)
FUSIONideos 2.7.2 available (FULL & UPDATER)
FUSIONremix v0.5
-Completely rewrite from scratch
-Fixed Link2SD autolink conflict
-Now supporting: Gmail, Google Maps, Voice Search, Google Translate, Google Docs, Street View, Google Search, Facebook, Link2SD and No Frills CPU Control
-Minor correction
PLEASE UPDATE, it's an HOT update!
FUSIONideos 2.7.0 - 3/8/2011 (day/month/year format)
FUSIONideos 2.7 FULL & Updater available (compatible with all 2.6.x installations)
-FUSIONboost v0.7
--reverted the sleep value
--minor fixes
-FUSIONremix v0.2
--Now supports updates pushing for Voice Search
-FBfix script modified to run once at boot time
-Updated (and fixed issue) Voice Search to the latest version
-Updated hosts file with new adblock list
FUSIONideos 2.6.9 - 2/8/2011 (day/month/year format)
-FUSIONideos 2.6.9 UPDATER available (no full for now)
FUSIONboost v0.6
--some changes on renice values
--increased sleep time
--added support for other popular launchers and keyboards:
-go launcher ex
-adw launcher
-zeam
-gingebread keyboard
-thickbuttons
-go keyboard
-touchpal
-betterkeyboard
-slide it
FUSIONremix v0.1
a simple script that will help to keep your ideos updated, clean and with free space. It moves automatically at boot time any update of Facebook, Gmail, Gmaps, Link2sd and Cpu Control to the internal system memory, so your Data partition will be kept clean without duplicates!
It will also clean the dalvik cache for those apps, so no junk in your data partition!
You don't even need FUSION Extras Facebook package ! Just download it from the market, reboot...and Facebook will be pushed to the system partition!
KERNEL FLAVOURS - 1/8/2011 (day/month/year format)
Kernel flavours for FUSIONideos 2.6.x series available!!!
FUSIONideos 2.6.8 - 1/8/2011 (day/month/year format)
-FUSIONideos FULL 2.6.8 (Basically now I'm moving to a modular architecture, so you can customize your installation)
--Updated apps
--FUSIONboost v0.5 (now supports HTC Ime keyboard)
--Removed Google Translate (Now available via FUSION EXTRAS)
--Removed Original FROYO Launcher 2 (Now available via FUSION EXTRAS)
--Removed the "standard" EMAIL CLIENT (Now available via FUSION EXTRAS)
--Facebook v 1.6.2 (Now available via FUSION EXTRAS)
-FUSIONideos 2.6.8 updater
--FUSIONboost v0.5 (now supports HTC Ime keyboard)
FUSIONideos 2.6.7 - 28/7/2011 (day/month/year format)
FUSIONideos v2.6.7 (ONLY updater) released (no full install for now)
-FUSIONboost v0.4 (aggregate changelog, sorry today I released 4 updates )
--Fixed typo that prevented renice of phone app (I apologize...)
--Now it will make permanent again the phone app if crashes
--Better values and support for more applications now it supports some keyboards and launchers.
--Fix a typo that caused low performance in launchers
--Better address book performances
FUSIONideos 2.6.3 - 27/7/2011 (day/month/year format)
Facebook contacts photos script will now fix the database every hour instead of every minute (saves a little battery)
Added FUSIONboost: it will boost phone app to popup and ring faster and some system apps for a better responsiveness
Changed memory management priority for the home app, so now is harder to be killed and it will not redraw often. (Fixes this problem)
Updater for FUSIONideos 2.6.x users available.
FUSIONideos 2.6.2 - 24/7/2011 (day/month/year format)
Fixed memory settings force close (bugreport)
Hotfix updater available, so you don't need to fresh install.
FUSIONideos 2.6.1 - 23/7/2011 (day/month/year format)
Fixed Camera app unable to take pictures (bugreport)
Removed Facebook app from the FULL installation (until I understand why makes the google push service crash)
For early 2.6.0 adopters, Hotfix updater available, so you don't need to fresh install.
FUSIONideos 2.6.0 - 22/7/2011 (day/month/year format)
REBASED from scratch and PORTED from the U8180C56B629 ROM (huawei compiled it on 3 July 2011 !!) the freshest available!
Optimized for a better U-8150 experience
Blazing fast GPS (AGPS seems still to fail time injection, but my ideos fixes the gps in few seconds, the ephemerides data seems to be injected correctly..)
Updated all extra and google apps
Removed File expert (download from market if you want it back)
Added the original froyo's launcher2 (to select it, go in Settings->Applications->Manage Applications->HUAWEI Launcher and "Clear defaults" for the Launch by default
note: titanium backups from 2.2 / 2.4.x should work
fresh install required!
20/7/2011 (day/month/year format)
released FUSIONideos 2.4.1 HOTFIX updater fixes:
Missing touch controls during phone call (see green alert)
Removed bugreport writing to SD Card when pressing the volume keys Thanks to Bertans for the fix!!
6/7/2011 (day/month/year format)
(sorry, no updater available, fresh install required)
REBASED on the fresh rom: U8180 V100R001PRTC224B625 (Portugal Optimus)
Fixed the "anonymous call not ringing" issue
Added the Fix facebook contacts pic script by Atl4ntis (THANKYOU!!!!!!)
Removed Youtube App
Disabled screen on with volume arrows
Disabled Wifi to Data plan warning
Disabled the AGPS switch on settings (Until I got it 100% working)
Moved the bootanimation to /cust
New CALENDAR WIDGET
New EMAIL WIDGET
Updated No Frills CPU Control to the latest version
Updated the kernel flavours for the new rom (please download again your favourite)
1/7/2011 (day/month/year format)
Full rebase on Android 2.2.2 ported from the U8180 Australian Optus rom
New theme (U8180 theme + some customizations like transparent bar and notifications, icons etc)
(maybe now working) AGPS (http://forum.xda-developers.com/showthread.php?p=15197571)
[Kernel] Disabled swap support
[Kernel] Added Smartass cpu governor (used by default - please before looking at cpu stats, read here http://forum.xda-developers.com/showthread.php?t=730471 about Monitoring the CPU frequency)
[Kernel] Fixed the interactive governor bug
[Kernel] Enabled tunneling for openvpn support
[Kernel] Changed some frequencies (NO TURBO FORCE MODE, I use the old patch, in my tests turbo force made my ideos unstable)
Huawei Launcher (aHome)
Added Google CarHome
Updated apps
Removed toggle2g and tapeatalk
Mobile Partner iso image moved to /cust
Misc. Tweaks
---------------------------------------CREDITS---------------------------------------
dsixda for his GREAT kitchen - FUSIONideos won't be possible without this!
The uot team FUSIONideos is possible thanks also to their great online kitchen: http://uot.dakra.lt/
All the XDA community sorry I don't remember the nickname of all devs where I picked the stuff, mods and hints for this rom, but I want say you THANKYOU!
EP690D for his great rom discovery service
Grotesque for the bootanimation
Atl4ntis for the unlocked market and the facebook contacts pics fix script
Michelangelo Brunetti for mantaining the italian release topics on several forums!
Maurizio Cavalletti for the great hosting for the mirror / archive !
tj_style for the multitouch patch & OEMLOGO tutorial
estebanSannin for our joint venture on kernel clock mod and hints on getting all work!
Bertans for his support and hints
All the users of this rom for their support and bug reporting. The rom is great also thanks to you all!
Beta Testers: twindad, JiroPrinz8 and pponsil
SUPPORTERS (THANKYOU ALL FOR YOUR DONATIONS AND AFFECTION TO THE ROM!):
MTech
Julien Bourcier
Davide Foschi
Giacinto Romani
Giancarlo Orru
dassa86
d0nd0l0
dumah brazorf
Bubino75
Maurizio Cavalletti
Dan Padure
Sergio Saporetti
Jonathan Yau
Luca Altea
Adriaan Hess
Jayavinda
Masatoshi Higuchi
Simon Wong
THANKYOU ALL!!
Download section
---------------------------------------FUSIONideos DOWNLOAD---------------------------------------
FRESHEST RELEASE - FUSIONideos 2.7.4 FULL installer (then update to 2.7.10 using the updater!): DOWNLOAD FUSIONideos 2.7.4 FULL
MD5: 755ba66c6f86f91cd2a81425ae9e3b2f
FUSIONideos 2.7.10 updater (only for 2.6.x /2.7.x users) - just 2 seconds to update..it's snappy: DOWNLOAD FUSIONideos 2.7.10 updater
MD5: f4b8d64740b5d6e9bc62aab5248b9816
OFFICIAL MIRROR - THANKS TO MAURIZIO CAVALLETTI
Do you want offer me a drink or just say thank you for the FUSIONideos project? you should donate something clicking under my nickname (Dollar donation), it doesn't matter how much, the rom is released just for sharing love
For EURO donations, click here
---------------------------------------FUSIONideos EXTRAS!---------------------------------------
SOFTWARE:
Standard Email Client DOWNLOAD STANDARD EMAIL CLIENT v 1
Original Froyo Launcher 2 DOWNLOAD ORIGINAL FROYO LAUNCHER v 1
Toggle 2G DOWNLOAD VERSION 0.0.15
SOURCE FOR DEVELOPERS:
Kernel Patch with under/overclock :
DOWNLOAD KERNEL PATCH
You're back! YESSS! Where's the DL Link though?
hachoo said:
You're back! YESSS! Where's the DL Link though?
Click to expand...
Click to collapse
I was writing the post, LOL
Refresh the page
paturnisi!!!
Great job guy!
Thanks all! Please report here any bugs or suggestions!
Curious..can we get blue icons instead of green?
or atleast a flashable zip.. or an xml to morph? please and thanks.
Is there an english set of instructions on how to install clockwork mod? Assuming that because you've written CLOCKWORK ONLY that it doesn't work with Amon-RA at all?
hachoo said:
Is there an english set of instructions on how to install clockwork mod? Assuming that because you've written CLOCKWORK ONLY that it doesn't work with Amon-RA at all?
Click to expand...
Click to collapse
Yes, It's only clockworkmod compatible, 'cause of the new updater-script used on building process.
I suppose you've already installed drivers, if you already have amon-ra...
For install clockworkmod:
Download and unzip the package from my link
Shutdown your phone
Connect to your pc
Power on in bootloader mode (RED key + DOWN VOLUME KEY + POWER BUTTON)
Launch installer script for your OS
If all it's ok, recovery will autoreboot your device.
sweet. Thanks man. Google Translate didn't do such a good job of italian to english
Will this work on V845?
Can you add App2SD??? Thanks
iHero96 said:
Can you add App2SD??? Thanks
Click to expand...
Click to collapse
maybe in a next release... I'll add app2sd+ only when fully working, stable and reliable.
FUSIONideos is all about user experience....Its clean, beautiful, full featured user interface has been now used for the new djdroid 0.5 . If you need absolutely app2sd+ give it a try .
complimenti fusion, molto veloce è pulita, mi piace la poca personalizzazione (tipo il bootimage android). magari la prossima release con app2sd+ ed è na favola
mcannataro said:
complimenti fusion, molto veloce è pulita, mi piace la poca personalizzazione (tipo il bootimage android). magari la prossima release con app2sd+ ed è na favola
Click to expand...
Click to collapse
Il boot android è stato modificato solo facendolo nero. È inutile mettere bootimage con scritte assurde e antiestetiche, tanto le persone poi vanno a cambiarla... meglio fornire una rom pulita e già pronta all'uso da subito
giusto fusion, l'unica cosa che ho notato e che quando selezioni riavvio o recovery esce sempre il pop up con SPEGNI, notato vero?
mcannataro said:
giusto fusion, l'unica cosa che ho notato e che quando selezioni riavvio o recovery esce sempre il pop up con SPEGNI, notato vero?
Click to expand...
Click to collapse
si, nella prossima versione il powermenu sarà tradotto in italiano e proverò a cambiare le 2 schermate di spegnimento
Non ho usato il framework già pronto e tradotto di trinacre, quindi sto lavorando per conto mio
------
Yes, on the next version the powermenu will be italian translated, and I'll try to change the 2 shutdown confirmations.
I'm not using the already modded and translated framework by trinacre, so I'm working in my own
FUSIONdev said:
si, nella prossima versione il powermenu sarà tradotto in italiano e proverò a cambiare le 2 schermate di spegnimento
Non ho usato il framework già pronto e tradotto di trinacre, quindi sto lavorando per conto mio
------
Yes, on the next version the powermenu will be italian translated, and I'll try to change the 2 shutdown confirmations.
I'm not using the already modded and translated framework by trinacre, so I'm working in my own
Click to expand...
Click to collapse
@ Italians
Request: I totally respect every Language but Kindly talk in English hee on forums ... so others can understand too ... but most importantly benefit from whatever u guys were talking abt ! I hope u aren't offended by that .. THANKS !!
@ FUSIONdev
well First of all Thanks alot for yet another Awesome U8150 ROM !! ..... I truly appreciate all DEVs making contribution to this device ...
but here comes the request part....
REQ: As I've asked on every single thread here !! .....could ya plzz plzz plzz make the Status bar GLOSSY with 50% Transparency when we slide it down .... along with Quick (Wifi/BT/Rotation/Brightness) Settings accessible thru Notification (just like Samsung Touchwiz UI) .....is it possible for you mate ???
looking forward to +ve reply =P
Thanks !!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Read it before flash!
-All the time I'm testing optimizations and features so it might happen that something breaks
Features:
INTERNAL CHANGES:
ROM:
*Aroma with ton of choices
*AdAway (disabled by default)
*debloated from useless things
*deodexed
*exchange of samsung to aosp apps
*disabled scrolling cache across OS - More smooth scroll
*remove signature verification
*patched services.jar
*enabled installation of non market (3rd party) apps by default
*no limits on joining contacts
*extend speed dials to 100
*extend contact name length limit
*call button in contacts
*call record enabled + disabled ascending ringtone
*4 way rotation
*unplugging from usb doesn't turn screen on
*some build.prop touches
*powered by The_Thing script
*viper4android (option in aroma)
*full xposed integration
INTERFACE CHANGES:
*removed touchwiz blue overlay to aosp holo
*call and message block
*power saving
*revamped statusbar with
- 1% increments for battery
- data traffic meter
- settings/clear all button
*settings/dialer/sb apps that looks beautiful
Changelog:
Code:
1.0.1 (20160113)
- Fixed some issues with binaries
- Portuguese Translation in Aroma
- Dialer is now themed
- Removed OTAUpdater see in Q&A Why?
1.0.0 (20160111)
- Version system will be based on small revisions from now on
- Backend fully working
- Removed GApps choices (A Note on Google Apps for Android)
- Small Fixes
0.9.8 Beta
- Fixed alot of force closes and bugs
- Added Swiftkey
- More GApps
- JB App Animation
- Still the backend is not 100% working
0.9.8 Pre-Alpha
- Initial release for devs and testers only
Download:
New build is up
Breeze ICS builds
Thanks:
- @JustArchi for being a good friend and helping me with first steps
- @amarullz for AROMA and its great possibilities
- @Daniiiik49 for his AROMA Material Theme
- @I_AM_MEOWTH for the AOSP framework
- @_Bon_Bon For The_Thing Script and his Busybox binaries
- @zhuhang for ViPER4Android
XDA:DevDB Information
Breeze ROM, ROM for the Samsung Galaxy Pocket Plus
Contributors
RainbowLaw
ROM OS Version: 4.0.x Ice Cream Sandwich
ROM Kernel: Linux 3.0.x
Based On: TouchWiz
FAQ:
What is Aroma?
-Check Here
Aroma Installer rebooted to recovery by itself during the installation?
-Don't panic its our device fault it cant handle fast copying to fix it reboot to recovery again and the wipe everything except sdcard
Why I removed OTAUpdater?
-Well its nice having otaupdater for the user but for me it means I need to upload to 2 different servers which is too much from my already slow upload speed sry for your loss
Why the images aren't appearing
-Lame dropbox, short answer it will be available soon error is (429)
When will you finish this or that (ETA)?
-Sincerely respect that I have a life so kindly wait
How to activate Adblock?
-Adblock is built-in The_Thing script so for more info visit the thread.
I have a XYZ bug, what should I do?
-Calmly tell me in the thread what you did and what happened give as much info and im gonna be your angel
The ROM is awesome, where can I do to you?
-No thanks I didn't invent competitor to android so not yet
Images:
I can not install this ROM because Aroma I think. The installation finish and the another ROM stays. Can you help me please?
Lukadroid said:
I can not install this ROM because Aroma I think. The installation finish and the another ROM stays. Can you help me please?
Click to expand...
Click to collapse
In TWRP factory data reset or manually format /system , /data except sdcard and /cache and you're done
RainbowLaw said:
In TWRP factory data reset or manually format /system , /data except sdcard and /cache and you're done
Click to expand...
Click to collapse
Thank you. I installed TWRP and now it works.
Like the screenshots. Can i get the installation instructions?
Thomas CR79 said:
Like the screenshots. Can i get the installation instructions?
Click to expand...
Click to collapse
Sorry for long reply
Factory data reset in TWRP then flash it normally as flashable zip:good:
Lukadroid said:
I can not install this ROM because Aroma I think. The installation finish and the another ROM stays. Can you help me please?
RainbowLaw said:
In TWRP factory data reset or manually format /system , /data except sdcard and /cache and you're done
Click to expand...
Click to collapse
Click to expand...
Click to collapse
That happened twice before I got it to work in CWM by installing the "update.zip" package from this rooting tutorial.
Also, JetAudio didnt worked(black screen stopped working) at first but after updating it today, it worked, SwiftKey didn't worked either in the same way, so I couldn't type nothing at all, I had to download a GoogleKeyboard apk from internet to put all the basic info (wifi, gmail, etc) but after updates it started working fine!
Just for information purpose I have the pocketplus and I installed MaliveBooster in the old rom, I don't know if it had anything to do or if it was wiped along with everything when I flashed the new rom.
By the way, what's/why "coriplus"?
breeze rom
When i instal and reboot i keep getting static rom. In cwm i manually format /system and /data. Do i also need to format cache?
Installed twrp from here http://forum.xda-developers.com/showthread.php?t=2706316 . Did factory reset, and is now stuck on boot logo.
After 4 times trial and error the rom finally works with full installation.:laugh:
I installed this rom but not booting my pockt plus
Sent from my GT-S5301B using XDA Free mobile app
RainbowLaw said:
Read it before flash!
-All the time I'm testing optimizations and features so it might happen that something breaks
Features:
INTERNAL CHANGES:
ROM:
*Aroma with ton of choices
*AdAway (disabled by default)
*debloated from useless things
*deodexed
*exchange of samsung to aosp apps
*disabled scrolling cache across OS - More smooth scroll
*remove signature verification
*patched services.jar
*enabled installation of non market (3rd party) apps by default
*no limits on joining contacts
*extend speed dials to 100
*extend contact name length limit
*call button in contacts
*call record enabled + disabled ascending ringtone
*4 way rotation
*unplugging from usb doesn't turn screen on
*some build.prop touches
*powered by The_Thing script
*viper4android (option in aroma)
*full xposed integration
INTERFACE CHANGES:
*removed touchwiz blue overlay to aosp holo
*call and message block
*power saving
*revamped statusbar with
- 1% increments for battery
- data traffic meter
- settings/clear all button
*settings/dialer/sb apps that looks beautiful
Changelog:
Code:
1.0.1 (20160113)
- Fixed some issues with binaries
- Portuguese Translation in Aroma
- Dialer is now themed
- Removed OTAUpdater see in Q&A Why?
1.0.0 (20160111)
- Version system will be based on small revisions from now on
- Backend fully working
- Removed GApps choices (A Note on Google Apps for Android)
- Small Fixes
0.9.8 Beta
- Fixed alot of force closes and bugs
- Added Swiftkey
- More GApps
- JB App Animation
- Still the backend is not 100% working
0.9.8 Pre-Alpha
- Initial release for devs and testers only
Download:
New build is up
Breeze ICS builds
Thanks:
- @JustArchi for being a good friend and helping me with first steps
- @amarullz for AROMA and its great possibilities
- @Daniiiik49 for his AROMA Material Theme
- @I_AM_MEOWTH for the AOSP framework
- @_Bon_Bon For The_Thing Script and his Busybox binaries
- @zhuhang for ViPER4Android
XDA:DevDB Information
Breeze ROM, ROM for the Samsung Galaxy Pocket Plus
Contributors
RainbowLaw
ROM OS Version: 4.0.x Ice Cream Sandwich
ROM Kernel: Linux 3.0.x
Based On: TouchWiz
Click to expand...
Click to collapse
are u going to add screenshots?
Very well, but
After install it I try to set it in spanish, but there are some bugs in the translation and some features still in english like shut down menu
RainbowLaw said:
Read it before flash!
-All the time I'm testing optimizations and features so it might happen that something breaks
Features:
INTERNAL CHANGES:
ROM:
*Aroma with ton of choices
*AdAway (disabled by default)
*debloated from useless things
*deodexed
*exchange of samsung to aosp apps
*disabled scrolling cache across OS - More smooth scroll
*remove signature verification
*patched services.jar
*enabled installation of non market (3rd party) apps by default
*no limits on joining contacts
*extend speed dials to 100
*extend contact name length limit
*call button in contacts
*call record enabled + disabled ascending ringtone
*4 way rotation
*unplugging from usb doesn't turn screen on
*some build.prop touches
*powered by The_Thing script
*viper4android (option in aroma)
*full xposed integration
INTERFACE CHANGES:
*removed touchwiz blue overlay to aosp holo
*call and message block
*power saving
*revamped statusbar with
- 1% increments for battery
- data traffic meter
- settings/clear all button
*settings/dialer/sb apps that looks beautiful
Changelog:
Code:
1.0.1 (20160113)
- Fixed some issues with binaries
- Portuguese Translation in Aroma
- Dialer is now themed
- Removed OTAUpdater see in Q&A Why?
1.0.0 (20160111)
- Version system will be based on small revisions from now on
- Backend fully working
- Removed GApps choices (A Note on Google Apps for Android)
- Small Fixes
0.9.8 Beta
- Fixed alot of force closes and bugs
- Added Swiftkey
- More GApps
- JB App Animation
- Still the backend is not 100% working
0.9.8 Pre-Alpha
- Initial release for devs and testers only
Download:
New build is up
Breeze ICS builds
Thanks:
- @JustArchi for being a good friend and helping me with first steps
- @amarullz for AROMA and its great possibilities
- @Daniiiik49 for his AROMA Material Theme
- @I_AM_MEOWTH for the AOSP framework
- @_Bon_Bon For The_Thing Script and his Busybox binaries
- @zhuhang for ViPER4Android
XDA:DevDB Information
Breeze ROM, ROM for the Samsung Galaxy Pocket Plus
Contributors
RainbowLaw
ROM OS Version: 4.0.x Ice Cream Sandwich
ROM Kernel: Linux 3.0.x
Based On: TouchWiz
Click to expand...
Click to collapse
Doesn't work
Doesn't finish installing
Works on pocket plus s5303b?
????????????????????????
Works on pocket plus? S5303b duos?
My language is portugueses brazil
MRJOHN3904(JOHN_LINO) said:
????????????????????????
Works on pocket plus? S5303b duos?
My language is portugueses brazil
Click to expand...
Click to collapse
I don't think that it would work on that model. The ROM was made only for the pocket plus. And also I don't recommend you to install a ROM not meant to work in your device. So don't install it. Or you'll get a bricked phone.
Enviado desde mi GT-S5301 mediante Tapatalk
Excelente trababo ..La rom funciona muy bien.El unico problema.es que no se instala Viper android. Gracias amigo.Saludos desde Uruguay.
30owe56 said:
Excelente trababo ..La rom funciona muy bien.El unico problema.es que no se instala Viper android. Gracias amigo.Saludos desde Uruguay.
Click to expand...
Click to collapse
Trata a escribirle en inglés al autor de la rom. Yo esperare a que este lista para usarla como ya notificaron algunos bugs...
Enviado desde mi GT-S5301 mediante Tapatalk
any progress on this project?
can u post a screenshot showing the network meter?
does it have the same data meter as static 1.5.1 rom did?
btw, great rom.
im waiting for a stable/final version to install it. by now im using static v1.5.1
but i want to test this one. i like the new gui.
---------- Post added at 07:40 AM ---------- Previous post was at 07:32 AM ----------
can somebody make a video review of this cool rom?
rivenroth740 said:
any progress on this project?
can u post a screenshot showing the network meter?
does it have the same data meter as static 1.5.1 rom did?
btw, great rom.
im waiting for a stable/final version to install it. by now im using static v1.5.1
but i want to test this one. i like the new gui.
---------- Post added at 07:40 AM ---------- Previous post was at 07:32 AM ----------
can somebody make a video review of this cool rom?
Click to expand...
Click to collapse
Yes, same meter.
Enviado de meu XT1097 usando Tapatalk
{ X-PIXEL }
Xperia+Pixel Features
About:
X-Pixel ROM is combination of Google Pixel Features and Sony Xperia Apps. Base on AOSP and own ROM Build.. My ROM is build with latest Build no and 7.1.1 Nougat. Thanks to DespairFactor Development and Kernel Development.
Kernel.......
Kernel is not my own development Kernel, built-in DespairFactor Kernel on my ROM. Credit and Thanks to DespairFactor Kernel Development.
Disclaimer:
Install ROM at your own risk. I am not Responsible for anything that may happen to your device.
Thanks You.
I hope you will love my work.
Features:
Built from AOSP base and Nougat 7.1.1 features.
Combinations of Xperia features and Pixel features apps.
Rebuild Build.prop tweak for Google Assistant and Built-in Google App.
Layer/Substratum ThemeEngine native support.
Built-in Substratum ThemeEngine/Manager App on System.
Kernel is DespairFactor Kernel.( Credit and Thanks to DespairFactor Kernel Developement )
Debloated Google Apps and Pixel Apps.
Add Sony Xperia X built-in Sounds
- Alarms.
- Notification sounds.
- Ringtones.
- UI sounds.
Add Google Pixel Apps and Features list
- Phone/Dialer/InCallUI.
- Google Pixel Camera.
- Contacts.
- Messaging.
- Setting.
- Pixel Launcher Latest Build.
- Pixel Round Icons.
- Pixel Wallpapers.
- Live Earth Wallpapers.
- Live Data Wallpapers.
- New Elements Wallpapers.
- Sky High Wallpapers.
- Pixel Bootanimation.
- Built in Google Assistant.
- and more Features.
Add Pixel Nav Key Icon with Substratum Theme. ( Not included Pixel NavKey on System )
Google newCamera Features list
- Add Build.prop tweak for Camera and enable EIS.
- Support Burst Setting.
- Built-in support Video Stabilization.
- Flash mode with HDR.
- Auto HDR+ with manual exposure / AF/AE.
- Smartburst works.
- Modify all Nexus 5X configuration to Nexus 6P's, a bit slower but better quality.
- Add 240 FPS slow motion.
- Android wear app's target package name fixed.
- Build with New Google Camera 4.2.023 version.
- and more Features.
Add Sony Xperia features list
- Sony Album.
- Sony Music.
- Sony Clock.
- Sony Calendar.
- Sony Calculator.
- Sony Video.
- Sony Movice Creator.
- Sony Xperia Keyboard.
- Sony TrackID.
- Sony Clock/Weatther/WorldClock Widget.
- Sony Photo Editor.
- Sony Sketch.
- Sony Weather.
- Sony What's New.
- and More.
Added Root with SuperSU.
Add Gapps with OpenGapps.
Disabled forced encryption.
Disabled dm-verity.
Multi-Window Native Support.
Support Desktop shortcut with 7.1 Nougat.
Setting Features list
- Settings.
- Advanced System Setting.
- System UI Tuner.
Advanced Setting Features List
- Status Bar Icons.
- Battery Display Icons.
- Circle/Stock/Text Only/Droid/Horizontal
- and Default Battery Icon.
- Show Percent Overlay on Battery Icon.
- Charging Indicator.
- Battery Icon Colors.
- Battery Charging LED.
- Application LED Notification.
- Button Wake.
- Music Control.
- Match Rotation.
- and More Features.
System UI Tuner Features List
- Status Bar Icons.
- Navigation Bar.
- Do not Distrub.
- Other.
Battery Saver is transparent.
Surround Sound Mod.
Add Framework with new 7.1.1 Nougat.
New icons for Settings Icons.
Add New libraries
Add Power Menu Option
- Power Off.
- Reboot.
- Normal Reboot.
- Soft Reboot.
- Reboot to Recovery.
- Reboot to Bootloader.
and Add more Features.
Change Log:
Changelog : V1
- Initial Release.
Changelog : V2
- Add new latest Xperia Home:
-IconPack Support.( No need Root )
-Choose Icon Size.
-Add Google Now Pan to the Home Screen.
-Auto Rotation.
-Pane Transition Effects.
-Show name in dock.
-Search apps on Appdrawer.
-Add Icon to Home Screen.
-Sorting Apps.( Own Order, Most Use,
By Name, By Date )
-Support Sony Clock and Weather Widget.
-And more.
- Live Earth Wallpapers with Pixel Launcher
-Working. ( no force stop )
- Live Data Wallpapers with Launcher.
- Latest Pixel Wallpapers Image.
- Latest Pixel Launcher Build.
-Latest Google CameraNX V4 Mod.
-Use Pixel's profile to enable ZSL.
-Zero Shooting Lag HDR+
-Photo under HDR+ auto mode.
- New Black Pixel Bootanimation
- Latest Google Dialer.
-Latest Google Contacts.
- Latest Google Messaging app.
- Pixel new Icons for Pixel Launcher.
- Latest Update Xperia Apps:
-Sony Music.
-Sony Movie Creator.
-Sony TrackID.
-Sony Sony Sketch.
-Sony Xperia Home.
- Add new Viper4Android Sound Mod:
-Viper4Android with preinstall Driver.
( No need Driver Install )
-Viper4Android with its Super Quality.
-Built-in Dark Material theme
-Works in Permissive and Enforcing
SELinux.
-Works with Permissive kernel is installed
-Installed in /system/priv-app.
-Advanced Linux Sound Architecture.
-Sony*and Beats*libraries effects.
-Library & Effect entries in:
/system/ect/audio_effects.conf
/system/vendor/etc/audio_effects.conf
/vendor/etc/audio_effects.conf
/system/etc/htc_audio_effects.conf
-Five custom audio_effects.conf files for
Sony Beat Edition.
-And more.
- Add new Dolby Digital Plus Sound Mod:
-Intelligent Equalizer.
-Adapted and audio_effects.conf.
-Optimized mixer_path.xml.
-Play with Music,Video,Game and other.
-Volume Leveler.
-Dialogue Enhancer.
-Fixed compatibility for Ds and DsUI.
-Added permissions in installer script.
-Fixed issue with audio_effects.conf.
-Sourround Virtualizer.
-Intelligent EQ with Manual.
-Intelligent EQ with Open.
-Intelligent EQ with Rich.
-Intelligent EQ with Focused.
-Added Dolby features.
-Add Dolby Audio.
-Dolby with the best Sound Quality.
- And other bugs fix.
Requirement:
- Bootloader Unlock.
- Recovery.
- ROM Zip.
How To Install:
- Reboot to Recovery.
- Wipe System, Data and Factory Reset.
- Wipe Cache and Dalvik Cache.
- Flash ROM Zip.
- Flash Gapps.
- Flash SuperSU.
- Reboot.
[ If you have first booting time is Bootloop to Recovery, press Power Off from Recovery and again press Power button and it's Ok ]
How To Update:
* If you already have and flash ROM V1 *
- Reboot to Recovery.
- Wipe Cache and Dalvik Cache.
- Flash V2 Zip.
- Reboot.
- Enjoy.
Note:
For Viper4 Android SoundMOD :
- No need Driver Install.
- Need Root access & SELinux Mode Changer App, to work for Viper.
- You need enable Permissive on SELinux Mode App.
SELinux Mode Changer App ( Credit @rachanta )
https://www.androidfilehost.com/?fid=23991606952606957
How to Enable Setting :
- Open Viper4 App
- Menu > Show Notification
- Menu > FX Compatible Mode > choose Compatible
- Menu > UI Setting > choose Expert
- Menu > You can set other soundSetting
- Menu > Save Effect Profile > New Effect Profile > "Stock"
(this will help you find your working v4a directory)
Substratum Themes:
I am now use this following Theme and I want to share only.
Credit and Thanks to @themer :
- N Nav Bar Theme
https://play.google.com/store/apps/details?id=com.varefaz.NNavbar
- Dark Material Theme
https://play.google.com/store/apps/details?id=com.chummy.darkmaterial_layers
- Deity Theme
https://play.google.com/store/apps/details?id=com.r3ds.deityoms
- Divinity Theme
https://play.google.com/store/apps/details?id=com.r3ds.divinitytheme
Bugs:
* If you have Camera bug and black screen, you need download camera apk and normal install and it's OK *
- Google Pixel Camera
https://drive.google.com/file/d/0B9Xul_AtQRjbVUNkQzdBb2Eyamc/view
Thanks and Credit To:
- @AOSP for SourceCode
- @Sony Mobile for Xperia apps
- @UberStock for any System apps
- @DespairFactor for Kernel Source
- @Substratum for ThemeEngine
- @Pranav Pandey for Live Earth Wallpapers
- @guitardedhero for Viper4Android+Dolby
- @All XDA Developers
XDA:DevDB Information
[Nougat][5X][7.1] X-Pixel ROM | Xperia+Pixel Features , ROM for the LG Nexus 5X
Contributors
PlayerZ_ZawZaw
Source Code: https://github.com/mdalexca/bullhead
ROM OS Version: 7.x.x Nougat
ROM Kernel: Linux 3.10.x
ROM Firmware Required: Bootloader Unlock
Based On: AOSP
Version Information
Status: Stable
Current Stable Version: V2
Stable Release Date: 2016-11-09
Created: 2016-11-03
Latest Update: 2016-11-09
Features? Is navbar animated like Pixel?
Lol. Android 7.1.1 from Android Open-Source xD
Thank you! Excited to try this. I'm coming from XperianZ which similar but isn't based on 7.1.1 yet
Download:
• ROM File
X-Pixel ROM Version 1
https://drive.google.com/file/d/0B1ei1NyHKTpuLTRZeXJiTTVxSTQ/view?usp=drivesdk
X-Pixel ROM Version 2
https://drive.google.com/file/d/0B1ei1NyHKTpueUozeGdINXhvcTA/view?usp=drivesdk
• Gapps ( Credit @opengapps)
http://opengapps.org
• SuperSU ( Credit @Chainfire )
http://forum.xda-developers.com/apps/supersu/stable-2016-09-01supersu-v2-78-release-t3452703
Screen Shots:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
awesome
downloading, will report back asap
The phone-app crashes
DeanNexus said:
The phone-app crashes
Click to expand...
Click to collapse
equal issue here! :/
Sent from my Pixel XL using XDA-Developers mobile app
I think you guys need to give permission on phone app
Enviado do meu Nexus 5X através de Tapatalk
rsimas said:
I think you guys need to give permission on phone app
Enviado do meu Nexus 5X através de Tapatalk
Click to expand...
Click to collapse
no, not related with that. already tried.
thanks for the suggestion
nrdl said:
no, not related with that. already tried.
thanks for the suggestion
Click to expand...
Click to collapse
So are you the only one having this issue? Anyone else?
Sent from my Nexus 5X using XDA-Developers mobile app
nrdl said:
no, not related with that. already tried.
thanks for the suggestion
Click to expand...
Click to collapse
I dont have that insue with phone app as you can see. Like i sayd you need to give all permissions and also in aplications need to put phone in where it says wich aplication is to phone. Sorry my english i cant explain better
Enviado do meu Pixel XL através de Tapatalk
gapps keeps on crashing for some reason i am using the right version arm 64, 7.1, full
rsimas said:
I dont have that insue with phone app as you can see. Like i sayd you need to give all permissions and also in aplications need to put phone in where it says wich aplication is to phone. Sorry my english i cant explain better
Enviado do meu Pixel XL através de Tapatalk
Click to expand...
Click to collapse
podes explicar em português (sorry guys, just saying he can write in portuguese as I saw by his screen )
I can send also my screen for you to check that I have all permissions.
there are more reports about crashing gapps and not much wrong things we could have done.
I'm using opengapps micro arm64 7.1
nrdl said:
podes explicar em português (sorry guys, just saying he can write in portuguese as I saw by his screen )
I can send also my screen for you to check that I have all permissions.
there are more reports about crashing gapps and not much wrong things we could have done.
I'm using opengapps micro arm64 7.1
Click to expand...
Click to collapse
Onde tem aplicação de telefone clica em cima vai abrir outra "pagina" com varias cenas e tambem escrito aplicação de telefone clica em cima e escolhe telefone porque vem sem ter la a opção telefone inserida , para mim foi isto que fiz porque tambem estava com problemas no telefone. Sorry its no english by the rulles of xda but i can not explain this in english
Enviado do meu Pixel XL através de Tapatalk
Great rom, fast and stable. Can you disable full screen keyboard in landscape view? Thanks!
7.1 and 7.1.1 apps crash on multiple roms and multiple gaps pkgs for me, not sure or has anything to do with rom. ??
Sent from my Nexus 5X using XDA-Developers mobile app
There have been problems with ooengapps larger packages for a while.
Try OpenGapps mini or micro. Any package without webview replacement.
Or better yet, try the PureNexus mini Dynamic Gapps.
Sent from my Nexus 5X using XDA-Developers mobile app
okay. according to the OP, the camera is a bit slower but has better quality. so if i want normal camera. i should just download the apk from apk mirror?
gorilla p said:
There have been problems with ooengapps larger packages for a while.
Try OpenGapps mini or micro. Any package without webview replacement.
Or better yet, try the PureNexus mini Dynamic Gapps.
Click to expand...
Click to collapse
He cant use dynamic. It's based off 7.0. SDK 24
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Further Development for this project is stopped as it got expanded to a new mod here-Oxygen Expansions - OxyMods+
Supports all OnePlus 7 SeriesPlease use this new version instead of ButtersExtended
It's A Magisk Module with many features that some you can see and some you can only feel by your device usage.
It's A Magisk MOD + App,ButtersExtended
Butters Extended is an Extended version of ButterLimits or ButterFly that were old versions of the same.
ButtersExtended comes with several options to select withing installation-
-AdAway [Pre-Installed Systemlessly]
-BusyBox Android-NDK by [email protected] [Pre-Installed Systemlessly]
-Viper4Android FX (Stable) [Pre-Installed Systemlessly]
-Custom Window Animation Scales
-Force Highest Display Refresh Rate
-SELinux Permissive or Enforced
-Butters Bootanimation
-Disable SecureFlag [Stable]
=======
> Please also read Post #2 <
=======Features and Tweaks:----------UI Tweaks and more--------Basic Level tweaks-RAM Tweak
Faster Boot tweak (Not much noticeable)
Improved Audio/Video Recording Tweaks
Improved Gaming Tweaks
Improved Signal Tweaks
Internet Speed Tweaks
Makes Streaming videos Stream Faster Tweak
Graphics Enhancement Tweaks
Scroll and Touch Responsive Teak
Disabled some background logging and data sending
Small Power Saving Tweaks
Dialing/Calling fast Tweaks
Some Dalvik Tweaks
--------System-Level Tweaks-Filesystem Mount Tweak
Optimized Media Servers and GMS to save battery
UGMS Doze to save battery
Extra GMS Doze
GMS Blocker
Some more Doze Tweaks for better battery backup
Disabled some Google Wakelocks (Will does not harm anything) - will give just better battery backup
--------Kernel and CPU Level Tweaks-Customized CPU Active Settings for different situations
Some CPU Frequency Tweaks
Forcibly switched off some kernel logging
Some Optimization Tweaks for Improved userspace experience
Small Entropy Tweaks for a good balance between performance and battery
Some kernel tweaks to remove wasted CPU cycles
Disabled some kernel Console
Optimized CPU bandwidth
Some more CPU level Miscellaneous Tweaks
Some kernel-level network Tweaks to reduce battery eating
Virtual memory Tweaks for a good balance between performance and battery
Turned off some kernel debuggers to improve performance and battery life
Disabled Debugging logs to reduce power usage
Disabled GPU Frequency-based throttling
Kernel level tweak for better Idle Battery Life
Some more kernel-level Miscellaneous Tweaks
Some kernel-level Dalvik Cache Tweak
Some kernel-level Deep Sleep Tweak
Some non-useful ****s Removed (Cycles timely)
fstrim Tweak
--------
Gaming Mode for Gamers
-------
ZRAM Tweaks
-------Requirements to use ButtersExtended:-Device should be in a working state with Latest Magisk at its place
- Butters are fully tested on OP7Po/OP7TPro Series and is experimental for Non-Pro Series
Supported devices:
OnePlus 7 Pro with OOS 11 [All variants]
OnePlus 7T Pro with OOS 11 [All variants]
OnePlus 8 Pro with OOS 11 [All variants]
--------Flash Instructions-- Install in Magisk Manager
-Select Options with Volume Buttons
-After finishing, reboot your device
-Open Butters app, give root permissions
-Select Profile and apply
-When finished, Logs will get opened automatically
--You must READ Post #3 also. There are more details--
--------Uninstall-Just disable and remove it in Magisk Manager and reboot - Then Auto Butter Installer will complete the uninstallation and will also get self removed automatically.
OR
Use ButtersExtended Uninstaller zip that you can find in the device's internal storage in zzzbutters-files
OR
In case you delete the Module folder with any File Manager or in TWRP - Then Auto Butter Installer will complete the uninstallation and will also get self removed automatically.
-------Telegram Group
Butters | Limits that Fly | OnePlus 7 Pro | OnePlus 7T Pro | OOS11 | Experimental for Other Non-Pro Series
Balanced Profile- This will give you nice perfomance with good battery backup Battery Profile- This will give you best battery backup Extreme Profile- This will give great perfomance Extremely Aggressive- This will give you the best performance
t.me
-------
TEST BUILDS can be found in Telegram GroupCREDITS:A BIG THANK YOU to A Developer @topjohnwu - the founder of Magisk.
Magisk is like A God to all Android Modding world right now and the main features is System-Less (It defines itself). On the other side it comes with a lot of features...
@fOmey
@iglitch
@ BlassGo
@ lAlKenDi
@gloeyisk
@Chainfire
@Zackptg5
@osm0sis
All member of Team- Magisk and more...
If you Like my works or like ButterLimits
- You can donate me by buy me a coffee of your choice
Or
- You can Donate me here - Playstore Link
ChangeLogs/FAQ/Info-
Further Development for this project is stopped as it got expanded to a new mod here-Oxygen Expansions - OxyMods+
Supports all OnePlus 7 SeriesPlease use this new version instead of ButtersExtended
Before Download please remember some points below:
Developer of ButterLimits will not be responsible for any harm to your device
ButterLimits is not developed to harm any device, but to give your device better
Precautions are in your hands.
Click to expand...
Click to collapse
1. Butter is heavily based on Stock Kernel
2. Some VM Tweaks may or may not conflict while using any custom kernel (can or cannot create some issues)
3. ButterLimits/Fly on each boot force kernel to use Schedutil Governor.
4. ButterLimits/Fly uses CPU/Governor Tweaks for and on Schedutil Governor only.
5. If you change settings from any kernel tweaking app or just change governor, Then assume that many CPU/Kernel Tweaks (from ButterLimits/Fly) are not in use anymore and conflicting.
6. With ButterLimits/FLy, If you use any other mod also that contains Kernel/CPU/GPU tweaks that can heavily create issues.
7. ButterLimits/FLy Does it's best with Stock Kernel when it's alone.
8. But obviously you can try ButterLimits/Fly with different kernels. (But in that can if you get some issues, it will be difficult or impossible for me to solve it)
9. Please follow the Installation method below.
Conclusion:
Don't expect any support if you are on a custom kernel or sound mod.
However, I may help if possible but don't expect it.
But you can get help from other users in a thread.
Click to expand...
Click to collapse
-----
Butters AppWith Butters App, you have some options to test with according to user's need
ButtersApp only works with an Internet Connection and the App needs Root Permissions to run the scripts.. This will not use any noticeable data.
What does it do with Internet Connection?- Scripts included in App are server-based, so updating the script will fetch the selected option's latest script that is available on the server.
Without an Internet Connection, the app will not work.
Profiles:
1. Balanced-Profile - This will give you nice performance with good battery backup
2. Battery-Profile - This will give you the best battery backup [Performance may suffer]
3. Extreme-Profile - This will give you great performance and gaming
4. Aggressive-Profile - This will give you the best Performance and gaming [Battery Backup may suffer]
5. Gaming Mode - Only for Gamers [Not Recommended for Regular Use]
NOTE:
1. While updating ButtersExtended to the latest release, there is no need to uninstall the old one, Installation will take care of it.
2. After every reboot your last applied profile will be reapplied automatically. You don't have to do that again.
3. You can find 2 Log options in-app-
3a. View logs- You can find logs here from the last run
4b. View Changes- Here you can see whenever the script runs or whenever you change profiles.
Butter Profiles Exposition-
Screenshots-Latest Screenshots
-------
Changelogs-Changelogs v11.0.0 Final
Changelogs v10.3Changelogs v10Changelogs v9.6.2Changelogs v9.6.0Changelogs v9.1.0Changelogs v8.4.3Old Change Logs
Downloads-Further Development for this project is stopped as it got expanded to a new mod here-Oxygen Expansions - OxyMods+
Supports all OnePlus 7 SeriesPlease use this new version instead of ButtersExtendedStable Builds Repo-Please read above and use Oxygen Expansion instead of this
TEST BUILDS can be found in Telegram Group
great job with which kernel do you recommend using it
Marcos Requena said:
great job with which kernel do you recommend using it
Click to expand...
Click to collapse
For me stock is good as I have already tried it and using it from days.
OOS11 has still some bugs including battery. Stable TWRP is also not available yet.
And custom mods, kernels, still not available widely as compared to OOS 10.
So I recommend to be on stock for a safe side.
But it depends on user if user wanna try with different kernels.
Condition:
There is very less chances of any issue that using custom kernel with this mod will not harm or brick your phone only if your device is decrypted and kernel supports on decrypted device but can experience differences...so anyone can try it and share their experience here. Just make sure that kernel is for OOS 11 only.
I never recommend using custom kernels yet on encrypted OOS 11 before stable TWRP for OOS 11 will come.
perfecto gracias por el consejo seguiré con el stock kernel tengo el telefono descifrado y con twrp pero la verdad es que los kernels que he probado no hacen mucha diferencia con el stock kernel al menos en vida de bateria que estoy buscando
Marcos Requena said:
perfect thanks for the advice I will continue with the stock kernel I have the phone decrypted and with twrp but the truth is that the kernels that I have tried do not make much difference with the stock kernel at least in battery life that I am looking for
Click to expand...
Click to collapse
Just translated your text in English to understand.
Stock OOS 11 itself has some battery drain issue, and the officials already know this and working on it.
Mohitash said:
Just translated your text in English to understand.
Stock OOS 11 itself has some battery drain issue, and the officials already know this and working on it.
Click to expand...
Click to collapse
perfect thanks for the advice I will continue with the stock kernel I have the phone decrypted and with twrp but the truth is that the kernels that I have tried do not make much difference with the stock kernel at least in battery life what am I looking for
Awesome work, thank you for sharing. Gonna try this for sure.
Are you using gms doze from gloeyisk?
You have no intentions to support Beta Channel? Since OnePlus is really starting to slow down with updates im debating to stay on Beta Channel over Stable.. Want to try this^^
r0fless said:
You have no intentions to support Beta Channel? Since OnePlus is really starting to slow down with updates im debating to stay on Beta Channel over Stable.. Want to try this^^
Click to expand...
Click to collapse
Only framework mods will make issues for OpenBeta.
I will create a package for OpenBeta seperately for sure and yes with framework mods.
jaggillararla said:
Are you using gms doze from gloeyisk?
Click to expand...
Click to collapse
Plus and minus both. And thanks a lot to remind me to add it in CREDITS.
Any tweaks available anywhere that includes GMS doze are with credits gloeyisk only. That's my thinking as I have searched a lot and found this GMs doze every where.
For example in xxx no limits also.
I'm gonna take a risk and test this on my 8 Pro
Shen Ron said:
I'm gonna take a risk and test this on my 8 Pro
Click to expand...
Click to collapse
You will get a boot loop.
This will be available for 8 pro also very soon and my some other mod are also coming to 8 pro in 8 pro section
Mohitash said:
You will get a boot loop because of framework files from 7 Pro
Click to expand...
Click to collapse
I wouldn't have to worry since I can boot back into safe mode but thank you still
r0fless said:
You have no intentions to support Beta Channel? Since OnePlus is really starting to slow down with updates im debating to stay on Beta Channel over Stable.. Want to try this^^
Click to expand...
Click to collapse
Its now available for Open Beta also.
I installed this & I love the smoothness & UI but it is making my call screen not appear until it's already rang like 6 times, at which point whoever is calling me is now hanging up or going to VM... Causing missed calls.
jjohn7293 said:
I installed this & I love the smoothness & UI but it is making my call screen not appear until it's already rang like 6 times, at which point whoever is calling me is now hanging up or going to VM... Causing missed calls.
Click to expand...
Click to collapse
I will test that agaiin. Thank you for a report.
Hi, just giving some feedback. Using the mod for a couple of days now. Really nice and snappy UI. Battery send good as well.
Using this with the latest Dora Labs kernel. All good.