[Q] Problem: USB connection activates data connection - Milestone XT720 General

Everytime I connect the the phone to a computer through the USB cable, the data connection is automatically activated and I am charged for this. Does anybody have a hint on what can be the cause for this problem?
I had updated my phone to Dexter's v3 a long ago and I was not having this problem. But I had to flash the phone again with the same Dexter's version and now I am having this strange problem.

do you have some form of tethering software on your PC?

I have Mynet.apk (3G Mobile Hotspot) installed on my phone, nothing on my PC, but I removed it and the problem continues to happen...

danielps23 said:
Everytime I connect the the phone to a computer through the USB cable, the data connection is automatically activated and I am charged for this. Does anybody have a hint on what can be the cause for this problem?
I had updated my phone to Dexter's v3 a long ago and I was not having this problem. But I had to flash the phone again with the same Dexter's version and now I am having this strange problem.
Click to expand...
Click to collapse
Just to clarify, when you say "data connection" does that mean wireless data (vs wifi) or are you talking about wireless tethering? Does it happen if you are in airplane mode?

Yes, I mean data connection through my operator, not Wi-Fi.
If I put the phone in flight mode the problem does not happen, but it would be bad to put it in flight mode every time I connect my USB cable.

Why don't you try "APN ON/OFF" Widget from the App market.

Do you have the modem drivers installed on the PC? It's possible that the computer could be trying to use the phone as a modem and therefore chewing up your data.
Also, which method of USB connection are you selecting, Portals & Tools, Memory Card Access? Do you have USB debugging turned on?

reverendkjr said:
Do you have the modem drivers installed on the PC? It's possible that the computer could be trying to use the phone as a modem and therefore chewing up your data.
Also, which method of USB connection are you selecting, Portals & Tools, Memory Card Access? Do you have USB debugging turned on?
Click to expand...
Click to collapse
Yes, I think I have the modem drivers installed on my computer.
I am using the "Memory card access" mode and I do not have the debugging mode turned on.
The problem is that it was not happenning before... The computer should not try to use it as modem if I am trying to use in "Memory card access" mode...
Sent from my XT720 using XDA Premium App

krishn said:
Why don't you try "APN ON/OFF" Widget from the App market.
Click to expand...
Click to collapse
I use the SwitchPro widget to activate and deactivate the data connection, isn't it the samething?
Sent from my XT720 using XDA Premium App

danielps23 said:
I use the SwitchPro widget to activate and deactivate the data connection, isn't it the samething?
Sent from my XT720 using XDA Premium App
Click to expand...
Click to collapse
I haven't tried the App that you mentioned. Just try this, It might help

krishn said:
I haven't tried the App that you mentioned. Just try this, It might help
Click to expand...
Click to collapse
Thanks krishn! I tried the APN on/off widget and it worked. I am not totally satisfied with this solution, but I can live with that...
Thanks again

Your welcome

Related

USB Tether enabled on stock AT&T?

I searched the Captivate forum to see if AT&T left USB tether enabled on the phone and couldn't find squat. I'm inclined to assume that they disabled the capability unless you paid the extra $20 (or $30, whichever it is) to use the feature. Can anyone confirm please?
It does work
Posting this using the USB tethering feature and have not subscribed to any additional tethering service
1. Enable Airplane mode
2. Enable Wifi, and obviously connect to a wifi network
3. Search Market for PDANet (which is free)
4. Download
5. ????
6. Profit!
I have tethered via USB. you need the generic Samsung drivers Not the att captivate driver. Then Just enable pc connexrion in USB settings and your pc sees the phone as a network adapter.
NO Root required.
Sent from my SAMSUNG-SGH-I897 using XDA App
You can also do ad-hoc tethering.
hxxp://code.google.com/p/android-wifi-tether/issues/detail?id=449#c22
Sorry, didn't know the details, was trying to be funny. Listen to these other guys, but that is how you can install pda net on an unrooted phone.
Sent from my SAMSUNG-SGH-I897 using XDA App
Thanks all. The feature was one of the deciding factors for me to get the phone. Appreciate it
Tethering
I can personally attest to the fact that the Captivate WILL tether straight out of the box with NO third party app needed if you get the right USB drivers installed and just select PC Internet when you plug in the USB.. Wifi tether is a bit more touchy though..
[email protected] said:
Posting this using the USB tethering feature and have not subscribed to any additional tethering service
Click to expand...
Click to collapse
Definitely the funniest post. I read and expected to see that instructions were given too....nope. More of a "I have it and you don't."
He did not ask for directions he asked for someone to verify if it was possible. so take it easy dude
freddieman23 said:
Sent from my iPhone.
Click to expand...
Click to collapse
right...
Sent from my Apple IIe.
alphadog00 said:
I have tethered via USB. you need the generic Samsung drivers Not the att captivate driver. Then Just enable pc connexrion in USB settings and your pc sees the phone as a network adapter.
NO Root required.
Sent from my SAMSUNG-SGH-I897 using XDA App
Click to expand...
Click to collapse
I've seen a lot of folks refer to the generic Samsung drivers, but I can't seem to find a link to them anywhere.
Anybody have a link to where I can get them?
Anyone have some details on which drivers work for tethering? I am using the ones off Samsung's site and its telling me that it cannot start up the modem, perhaps im using the wrong drivers.
Thanks for the help
I installed the drivers from here, 64 bit in my case.
Changed USB setting on my phone to "PC Internet".
Plugged in my phone.
Waited for my laptop to setup the ethernet connection (Windows 7).
Disconnected from Wifi on my laptop for testing purposes.
Voila, submitted this post via USB tether to my phone.
gephoria said:
right...
Sent from my Apple IIe.
Click to expand...
Click to collapse
LOL.... i just couldnt stop laughing.
Drivers posted on Samsung US site does not contain network driver for tethering (no supprise there). AndroidForums.com Captivate forum has a sticky to download drivers that do include tethering.
If you don't feel comfortable going that way, you can download Kies from Samsung UK or any other non-US site. Kies has the proper driver included in the installation. If you don't like to use Kies, you can uninstall it and the driver will stay.
I ended up with Kies, The network device connects but I cannot reach open internet. Any thoughts?
Main Target said:
I ended up with Kies, The network device connects but I cannot reach open internet. Any thoughts?
Click to expand...
Click to collapse
It depends how you connect your phone. If you select USB mdoe to 'Kies' mode, you will have to use modem tethering inside the Kies application on your PC to connect. Otherwise, you need to set your phone to 'PC Internet' mode and your PC should be able to connect to internet once plugged in. No Kies needed in this mode.
Personally I don't see much value of the Kies (I can use WMP to do all the media transferring). Hence I uninstalled Kies and left the network driver alone.
This is while its set to PC Internet.
it just randomly started to work, hell I wont complain lol
Posting from a tethered captivate now

Captivate Update Removes USB Tethering

When I got my Captivate and first plugged it in to my laptop, I was surprised when I was greeted with four options on the screen, Kies, Music Device, Media Device, and USB Tethering. Of course, I tried out USB tethering and it worked nicely.
It looks like the latest OTA update just removed that functionality. The option isn't presented when I connect to my laptop. I wonder if they removed it all together or just hide the option.
Of course, there are several other tethering options available, so it's not a great loss, but I thought people might like to know about it. I'm just glad the update didn't brick my phone! Now if I could only fix the problem with the phone turning itself off randomly when it sleeps. This update doesn't seemed to have helped with that problem at all.
Captivate PC Internet (Tethering) Option Gone?
Wow, thanks for the heads up, I kind of figure that may happen they give a little and take a lot. Did you have the dreaded GPS issue and if you did was it fixed? Have you checked to see if the PC Internet option was removed from Settings>Applications>USB Settings?
Thanks Roger
Yes, the OTA took off the usb tethering option in USB settings. GPS does not seem to have been fixed on my end at all. Been about a minute, and navigation is still trying to get a lock.
Autarkhis said:
Yes, the OTA took off the usb tethering option in USB settings. GPS does not seem to have been fixed on my end at all. Been about a minute, and navigation is still trying to get a lock.
Click to expand...
Click to collapse
Thanks, I'll hold out for the Froyo update.
Roger
Why not use pre8?
From a phone on an app
What is pre8?
I just did the update and now I'm screwed. I'm at work with a bunch of homework to do and can't tether. How can I fix this before tomorrow night? I don't want to root my phone and can't use pdanet because my laptop doesn't have Bluetooth.
why not flash cognition ? That has mobileap in it...
Sent from my SAMSUNG-SGH-I897 using XDA App
Since I don't want to root my phone are my only options to either add Bluetooth to my laptop and pay for pdanet or add tethering to my plan?
jamespaulritter said:
Since I don't want to root my phone are my only options to either add Bluetooth to my laptop and pay for pdanet or add tethering to my plan?
Click to expand...
Click to collapse
Have you looked into the 1-click factory restore option?
i dont think that it requires root to work.
I just broke down and bought easy teather works great.
Sent from my SAMSUNG-SGH-I897 using XDA App
still having a little bit hassle on having a lock or fix location. always needs the help of network. GPS alone is kinda........urrrrggghhh!
If you are ok with a USB cable, I found a way to still use tethering over the USB cable after the OTA update. It is just not a straight forward as it was before. Here is how I got it to work on stock ROM, no root access.
Plug in USB cable and connect to PC. Select Mass Storage mode (when you have activated the Ask on connection in the USB Settings - Application menu under Settings). Fully connect you phone to the PC, by pulling down the Status bar and selecting the USB connect line and making the internal (and optional if you have installed external) Memory card visible on your PC. The on the PC disconnect the USB drives again (you have to disconnect first on the PC) and then end the USB Mass Storage mode by pulling again down the Status Bar on the phone and turn off the USB connection. Then when you unplug the USB cable and replug it and now select the Kies connection type, it will successfully connect to Samsung Kies. If you now have Samsung Kies on your PC installed (the UK version)you can select there the Tethering and start it and you can connect and your phone will do Tethering.
I tried it several times and every time it worked. This is not as elegant as it was before, but at least if you need an internet connection and your phone is the only way to get to it, you can still tether.
Hope this will help someone out there who needs a PC connection!
thgoepel said:
If you are ok with a USB cable, I found a way to still use tethering over the USB cable after the OTA update. It is just not a straight forward as it was before. Here is how I got it to work on stock ROM, no root access.
Plug in USB cable and connect to PC. Select Mass Storage mode (when you have activated the Ask on connection in the USB Settings - Application menu under Settings). Fully connect you phone to the PC, by pulling down the Status bar and selecting the USB connect line and making the internal (and optional if you have installed external) Memory card visible on your PC. The on the PC disconnect the USB drives again (you have to disconnect first on the PC) and then end the USB Mass Storage mode by pulling again down the Status Bar on the phone and turn off the USB connection. Then when you unplug the USB cable and replug it and now select the Kies connection type, it will successfully connect to Samsung Kies. If you now have Samsung Kies on your PC installed (the UK version)you can select there the Tethering and start it and you can connect and your phone will do Tethering.
I tried it several times and every time it worked. This is not as elegant as it was before, but at least if you need an internet connection and your phone is the only way to get to it, you can still tether.
Hope this will help someone out there who needs a PC connection!
Click to expand...
Click to collapse
For anybody who is wondering this worked fine for me as well. I selected UK for my location and language. I'll post back up letting you know whether or not it works selecting USA. Once configured and installed, it takes roughly 60 seconds to be up...
thats excellent. i do have Kies installed. I'll give it a shot tonight.
Wifi lost while charging from computer
Can any confirm since the update, wifi connections are now lost while charging from computer via the usb port. Edge or 3g is available if you turn off wifi before connecting. With wifi on, disconnect the usb from the computer and wifi access is again available on the phone.
Running Easytether now. Doesn't require root and seems to work fine. Available on the market, if you pull your sim card. $10 for the full licensed version.
Samsung Kies is free software specifically for the galaxy s series and allows you to tether.
The link is below. being a new member they wont let me post an actual link.
**in.samsungmobile.com/support/softwaremanuals/software.do?phone_model=GT-I9000&sw_type=SW**
Is there a way to re-enable the tethering option through the source code or rooting? Also if Froyo is OTA from AT&T, I would assume they would continue to keep this option hidden/removed. Am I right?
Zman28SS said:
Is there a way to re-enable the tethering option through the source code or rooting? Also if Froyo is OTA from AT&T, I would assume they would continue to keep this option hidden/removed. Am I right?
Click to expand...
Click to collapse
Yea, check the android development section. The Cognition ROM re-enables both USB and Wireless tether...
Tethering was not removed by the update. You don't need Kies installed, you don't need root, and you don't need any tricks. If you select the "Kies (firmware update)" mode, tethering works fine, assuming you've installed the USB drivers and created the necessary dial-up networking connection for the USB mode.

Use phone as wireless adapter?(NOT WIRELESS TETHERING)

I want to know if there is a way to use an android device as a wireless adapter? Not wireless tethering of your data connection but the ability to use the wifi connection on your pc.
Sent from my DROID3 using Tapatalk
Turn your data off and turn on your WiFi, connect to the desired network and try to tether via usb to your phone. This should hopefully bridge your connection if you have an aosp ROM. I'm not sure about sense, as I've never tried it on a sense ROM before.
Sent from my PG86100 using XDA App
So you mean download the wirless tether app and use it while data is off? And you can do it via usb?/ I've never used data tethering so idk im a noob
Sent from my DROID3 using Tapatalk
He meant to say, connect to wifi and in settings there will be an option to tether via usb
Although i am also not sure about sense roms
Or you can use a market app
There are many, Easy Tether will do the job
Connect to the wifi network and then use usb tethering
okay well I have a droid 3 so there aren't any roms out for it and when I try a wifi tether app from the market it disables your wifi
Sent from my DROID3 using Tapatalk
Moved to proper section
yus4eel said:
okay well I have a droid 3 so there aren't any roms out for it and when I try a wifi tether app from the market it disables your wifi
Sent from my DROID3 using Tapatalk
Click to expand...
Click to collapse
Okay, so basically what you're going to be doing is using your phone as a USB WiFi dongle. To do this, follow these instructions VERY carefully.
1) Assuming that you are already rooted (via z4root, Gingerbreak, or some other means), search for "EasyTether Lite" on the Android Market and download it.
2) Go into Settings>Wireless & Networks
3) Uncheck the box that says "Mobile Network", "3G", "Mobile Data" or something along those lines.
4) Check the box that says "WiFi" and connect to the desired network.
5) Now, download and install the drivers you need for EasyTether to work with your computer here (note that you are going to do this from your computer and not your phone): http://www.mobile-stream.com/easytether/drivers.html
6) Connect your phone to your computer via USB cable and open the EasyTether app. Enable tethering and with a little bit of magic and fairy dust, you should now have a connection on your computer.
Good luck mate.
Need for same
Need an expert here!
what we look for is using android phone to connect other devices not only to internet but also to each other .
We could do it with our modem,but with tethering is like a hotspot , every device can connect internet but cannot see other devices.
Everywhere i looked was explainin "how to tether" which is built in android 2.2 already.
Helps will be highly appreciated
Is it too simple?
I had trouble getting USB tethering on my macbook, not my PC, but:
I searched the market for USB tethering.
and with "Easy Tether lite" (the first app in the search results; there are other options, I tried this one first and it worked great).
I installed on my phone, ran it, followed the wizard, had to install USB tethering drivers for OS X at some point.
Now:
Phone getting WiFi from my router and entering my computer via usb.
I even set it up now to send this very post!!
cheers,
-nerB
EDIT: (Hmm, your syntax is kind of shaky, original poster... You don't mean use the computer as a wireless adapter for your phone do you?? that would be internet pass-through, yes? I think you do mean USB tethering but using a WiFi source, not the mobile connection. Is this as simple as hooking up a usb data tether but using the WiFi instead of 3G from your phone, such as to use a dingy laptop without wireless to get the WiFi in a Starbucks/etc/etc? Hmm.
Otherwise, your phone is not a WiFi wireless adapter, it has one that your phone OS connects to, which then "usb tethers" to computer...
I've never even seen a usb cable that connects a mobile phone to a mobile phone. Haha. I suppose if you had one, you should be able to USB tether from one phone and Internet Pass-Through on the other.....:/ )
Check out this thing called Bluetooth for that. It works wonders.
Sent from my ICS loving Evo 3D.
solution without additional software while having cyanogenmod
This works with cyanogenmod10 out of the box. Probably also possible with cm7/cm9 too.
Connect phone via cable to pc, connect phone to wifi, enable "USB-Tethering" (Settings -> Tethering/Hotspot), let OS detect the new device, done.
I know this thread has no activity since over a year, but if anybody finds this page like me while searching for this topic, I could be helpful for him knowing a method without using additional software while having cyanogenmod.
Chiefbrain said:
This works with cyanogenmod10 out of the box. Probably also possible with cm7/cm9 too.
Connect phone via cable to pc, connect phone to wifi, enable "USB-Tethering" (Settings -> Tethering/Hotspot), let OS detect the new device, done.
I know this thread has no activity since over a year, but if anybody finds this page like me while searching for this topic, I could be helpful for him knowing a method without using additional software while having cyanogenmod.
Click to expand...
Click to collapse
yet another reason to consider CM flash
Just some questions...
OK GUYS. thnx for the usefull info.
Now i wanna say that suppose we have this wifi dongle for connecting to computer..(see photo attached) we use this for connecting WIFI to our PC's. RIGHT???
NOW i wanna ask if it is possible that we can use our phone instead of this ""DONGLE"" as wifi signal catcher. NEITHER USB NOR WIFI TETHERING(like easy tether lite or many other options available on XDA.) [people are actually asking for "THIS OPTION" so we don't have to spend another 20-30 bucks but they ends up with USB or WIFI tether)
we connect our phone to PC and Search for WIFI Signals on PC... NOT on the phone itself.
please guys, if any one know how to do this then please share. OR please tell if it is possible or not..
thnx...
bump
pump
me too.
I want pc look the android devices (via usb) such as "usb wifi" and control the wifi (of android)
Chiefbrain said:
This works with cyanogenmod10 out of the box. Probably also possible with cm7/cm9 too.
Connect phone via cable to pc, connect phone to wifi, enable "USB-Tethering" (Settings -> Tethering/Hotspot), let OS detect the new device, done.
I know this thread has no activity since over a year, but if anybody finds this page like me while searching for this topic, I could be helpful for him knowing a method without using additional software while having cyanogenmod.
Click to expand...
Click to collapse
Well sir thanks it surely did help some one out and in this case its me so thanks again ....
using linux
im wondering is there anyway to use my phone as my wifi adpater so that ill install kali linux on my pc and receive wireless ssid
Use phone as wireless adapter for pc
just connect to wifi network in android and connect that android to pc with data cable and enable usb tether in android phone
MikeCriggs said:
Okay, so basically what you're going to be doing is using your phone as a USB WiFi dongle. To do this, follow these instructions VERY carefully.
1) Assuming that you are already rooted (via z4root, Gingerbreak, or some other means), search for "EasyTether Lite" on the Android Market and download it.
2) Go into Settings>Wireless & Networks
3) Uncheck the box that says "Mobile Network", "3G", "Mobile Data" or something along those lines.
4) Check the box that says "WiFi" and connect to the desired network.
5) Now, download and install the drivers you need for EasyTether to work with your computer here (note that you are going to do this from your computer and not your phone): http://www.mobile-stream.com/easytether/drivers.html
6) Connect your phone to your computer via USB cable and open the EasyTether app. Enable tethering and with a little bit of magic and fairy dust, you should now have a connection on your computer.
Good luck mate.
Click to expand...
Click to collapse
sorry for bringin up a old thread
but man ure a life saver my dongle died on one of my pcs and i used the same method for my LG G4 works like a charm
thank you a million times man
I actually just tried the above program and it works. It has serious limitations if your not getting the paid version. Blocks a bunch of webs sites and all secure ones. It does work though. I really wish Verizon would not have found it necessary to remove wifi sharing over USB for some dam reason. The S7 I have, had it factory and they removed it. Not sure why? Seeing how it does not have a fuking thing to do with the mobile network. I can actual tether my computer by USB using mobile network and can't from my wifi. Can already bypass they're tethering fee.
I will continue reading and searching till I find a way to undo or work around big reds unnecessary removal of this feature. Even if it involves crawling a 1000 miles on my hands and knees, on broken glass to find some big wig and beating the reversal out of him with the very S7 I'm typing this on.

Can't access USB mass storage on my PC

So I can't connect my Droid RAZR to my windows 7 machine...
I have tried a lot of things!
I've tried:
*Different computers including Vista and Linux
*Different cables
*Different fastboot files
*Re-installing drivers
*Factory reset
*PIM sync from the market etc.
What happens when I plug my phone into my PC is the computer recognizes it, it makes a sound, then it says Unknown Device connected or some times it says USB malfunctioned and then on my lockscreen it says the phone is charging but it doesn't show on my battery icon.
Whats also interesting is if I got into Fastboot mode and connect to my computer it says USB connected and then I can use it in RSD with no problems.
I'm on ICS with no root.
Please help!
Sent from my Nexus 7 using XDA Premium HD app
Try turning on USB Debugging (if you haven't), under Settings > Applications > Development.
I had the same prob with my S3... Tip from Post above solved my problem...
neomeone said:
Try turning on USB Debugging (if you haven't), under Settings > Applications > Development.
Click to expand...
Click to collapse
Thanks but I've already tried that
Jeanjacq said:
Thanks but I've already tried that
Click to expand...
Click to collapse
With the phone plugged in, have you tried opening up the lockscreen so you can get to your phone? Please take a screenshot of the device manager settings.
Computer Management -> Device Manager -> Find the device (double click on it) -> Details -> Hardware Ids
Or you can write out what the hardware ID is. Thanks.
YOu said you also tried it in linux. please post the output from lsusb for any unknown devices
Huawei Mercury
I am also having a similar issue with the pc not recognizing the phone. I never had an issue with this problem. I have only rooted my phone with no custom room. I have always connected my phone to the pc and was giving a connection screen on my phone asking me if i want to connect as a mass media storage. A week ago this behavior stopped. I don't know what to do anymore. I don't remember doing anything to the phone to mess up the setting? I connected it to several computers using different micro usb data cables and nothing occurs.
The only thing happens is my phone receives a charge from the computer and thats it. Any ideas? Is there anyway i can reset the system or what not?
quickser4u619 said:
I am also having a similar issue with the pc not recognizing the phone. I never had an issue with this problem. I have only rooted my phone with no custom room. I have always connected my phone to the pc and was giving a connection screen on my phone asking me if i want to connect as a mass media storage. A week ago this behavior stopped. I don't know what to do anymore. I don't remember doing anything to the phone to mess up the setting? I connected it to several computers using different micro usb data cables and nothing occurs.
The only thing happens is my phone receives a charge from the computer and thats it. Any ideas? Is there anyway i can reset the system or what not?
Click to expand...
Click to collapse
same problem here with my S3 mini can anyone help? please
neomeone said:
Try turning on USB Debugging (if you haven't), under Settings > Applications > Development.
Click to expand...
Click to collapse
me also facing same problem and already i turned on USB Debugging mode but nothing happened. still i can't connect USB mass storage of my android device
Hey guys what you should try to do is use this :
after pluggin in your devices and removing their current driver in device manager(control panel>admin tools>computer management>device manager>
and then install this
http://adbdriver.com/upload/AdbDriverInstaller.exe
also make sure you adb debugging is enabled (if it's not visible(setttings>about/info>build number tap it multiple times) usually its settings>dev options>usb debugging.
also maybe try using this software as pc suite myphonexplorer
Can you guys go to the storage menu in settings, press the menu key, select USB connection mode (or something like that) and play around with the settings in there? Try that out.
Sent from my Nexus 4 using XDA Free mobile app

My Pc Won't Recognize Vivo Nex S

Hey guys,
I have an issue that's been frustrating me. I can't connect my Vivo to my pc. I should be fine because I did everything. I uploaded the newest driver (I believe), I downloaded Vivo Assistant to
pc and I turned on USB debugging. When I put on the cable to the phone it does nothing other than charging.
Am I missing something? I'd appreciate any help!
Thanks1
Have you enable under developer setting-select usb configuration-media transfer protocol (MTP)??
By default it's only for charging,actually all the smartphone by default is charging selected and every user must change it to MTP and so pc can recognized it as hard drive.
Sent from my iPad using Tapatalk
paatha13 said:
Have you enable under developer setting-select usb configuration-media transfer protocol (MTP)??
By default it's only for charging,actually all the smartphone by default is charging selected and every user must change it to MTP and so pc can recognized it as hard drive.
Sent from my iPad using Tapatalk
Click to expand...
Click to collapse
Yeah, I did actually. My phone is the global version. Can that be the issue?
Alaaddinsarac said:
Yeah, I did actually. My phone is the global version. Can that be the issue?
Click to expand...
Click to collapse
Just to clarify situation.
Did you do what I've suggested and still your pc does not recognize your phone??
Did you tried different usb cable or different usb port on pc and still nothing??
This has nothing to do with global or any region parameter.
It's simple how every android device works.
Sent from my iPad using Tapatalk
See if when you connect to pc there's a message in notification center asking how you want to use USB connection. Select file transfer. You access this notification by sliding down from the top of the phone screen edge.
Also, unlock the phone before you connect to pc.
paatha13 said:
Just to clarify situation.
Did you do what I've suggested and still your pc does not recognize your phone??
Did you tried different usb cable or different usb port on pc and still nothing??
This has nothing to do with global or any region parameter.
It's simple how every android device works.
Sent from my iPad using Tapatalk
Click to expand...
Click to collapse
Yeah, I did what you suggested but sadly didn't work. I have used a different cable but haven't used a different pc. Maybe I should try that.
Saloei said:
See if when you connect to pc there's a message in notification center asking how you want to use USB connection. Select file transfer. You access this notification by sliding down from the top of the phone screen edge.
Also, unlock the phone before you connect to pc.
Click to expand...
Click to collapse
The problem is, I don't get a notification. I get nothing. It just starts charging.
Thanks for the help anyways!
Alaaddinsarac said:
The problem is, I don't get a notification. I get nothing. It just starts charging.
Thanks for the help anyways!
Click to expand...
Click to collapse
Remove MTP or your device from Device Manager and give it another go.

Categories

Resources