[GUIDE] ROOT for ASUS eee pad transformer (TF101) - Eee Pad Transformer Android Development

New root method is out for PRE and POST OTA, with insecure BOOT image and CWM recovery
Get It Here http://kan.gd/frm

OK, noobie here,
Please be gentle, I don't have a tablet although by everything I've seen, the transformer will be the one for me. I've read over and over again how rooting your tablet is the best thing to do since bread slicers were invented.
Simple question though. What do I gain by rooting my Transformer ( when they actually ship it in North America ) ?
That's it,
Cheers,
gpearson1968

gpearson1968 said:
OK, noobie here,
Please be gentle, I don't have a tablet although by everything I've seen, the transformer will be the one for me. I've read over and over again how rooting your tablet is the best thing to do since bread slicers were invented.
Simple question though. What do I gain by rooting my Transformer ( when they actually ship it in North America ) ?
That's it,
Cheers,
gpearson1968
Click to expand...
Click to collapse
You will be able to configure parts of the computer such as the processor etc that normally is not available to the user. You will be able to install custom ROMs which are different versions of the software included but will often be better than the original. As I mentioned earlier it will also (at some stage) allow you to change CPU settings so save battery or to gain maximum performance!
Hope this answers your questions, if you've got any more then fire away, thats why we're all here!

OK, cool, thanks for the invite.
Next question. If I root my Transformer, and ASUS puts out another version of their "ROM", will I be able to use the ASUS "ROM" ? Or once I root, I cannot go back ?
I obviously don't have a preference since I don't have a tablet yet. I've read how everyone loves the ROMS that out there ( Cyanogen, Vegan, TNT..... ) especially for the G-tab. I love overclockin, especially if you can notice the difference in apps like video playback and such.
For me, modding my soon-to-hold transformer isn't a done deal unless I know that whatever mod I do will enhance what I have, rather than simply replacing what I have. Does that make sense ?
So rooting will allow me to install different mods, and to get access at a deeper level to some of the inner gizzards of the tablet. Very cool.
Anything else it gives me ?
Cheers,
gpearson1968

Congratulations on making it and releasing to the community.
Don't know if this will affect your root method or not but there's supposedly a firmware update out from Asus tomorrow.

gpearson1968 said:
OK, cool, thanks for the invite.
Next question. If I root my Transformer, and ASUS puts out another version of their "ROM", will I be able to use the ASUS "ROM" ? Or once I root, I cannot go back ?
I obviously don't have a preference since I don't have a tablet yet. I've read how everyone loves the ROMS that out there ( Cyanogen, Vegan, TNT..... ) especially for the G-tab. I love overclockin, especially if you can notice the difference in apps like video playback and such.
For me, modding my soon-to-hold transformer isn't a done deal unless I know that whatever mod I do will enhance what I have, rather than simply replacing what I have. Does that make sense ?
So rooting will allow me to install different mods, and to get access at a deeper level to some of the inner gizzards of the tablet. Very cool.
Anything else it gives me ?
Cheers,
gpearson1968
Click to expand...
Click to collapse
To answer your question about going back, as long as you do a backup in the recovery it installs you can always go back to stock. You can even unroot it if you want!
So far there are no replacement ROMs out there yet, but Paul from Modaco has released his add on pack which boosts performance and a couple of other bits and pieces and does not affect the user interface so its a good one to try if you just want performance.
Lots of other things and benefits will pop up as time goes on, only a few (very lucky!!!) people have the tablet so far!

Thanks - that worked perfectly! - Now to look at overclocking

This didn't seem to work for me, I could boot into Recovery and perform nandroid backup etc but when I rebooted I ddn't appear to have root.
I have since flashed MCR Beta though so I am happy enough with that.
Cheers for giving us root.

Roach2010 said:
This didn't seem to work for me, I could boot into Recovery and perform nandroid backup etc but when I rebooted I ddn't appear to have root.
I have since flashed MCR Beta though so I am happy enough with that.
Cheers for giving us root.
Click to expand...
Click to collapse
Thus you have root

Will this work after the official 15/04 update has been applied?
I keep getting the android with the triangle above his head.

RedMist said:
Will this work after the official 15/04 update has been applied?
I keep getting the android with the triangle above his head.
Click to expand...
Click to collapse
No it wont You'll need to wait for root to be regained.

djdevine2 said:
No it wont You'll need to wait for root to be regained.
Click to expand...
Click to collapse
Forgive my simple question: is it possible to sideload apps without root? I gather there's another OTA due on April 28 and may try that before rooting. Would however like to install a couple of apps bought for my G-Tab.

rumors are saying now to root after the 4/14/11 update is ran. so just root it before u connect it to the internet and u can flash my rom and ill make a odexed version tonight after running some opts and go from there.
this devise i will be keeping to stock but will update new apps as needed once i get a new tablet next week.

New root method found will be out ~30th (to avoid the next OTA)
This allows custom recovery + boot image being flashed to the device
So all you US users can relax
I still do not have a device tho
PS.
This method is a team effort so credit is split

Apache14 said:
New root method found will be out ~30th (to avoid the next OTA)
This allows custom recovery + boot image being flashed to the device
So all you US users can relax
I still do not have a device tho
PS.
This method is a team effort so credit is split
Click to expand...
Click to collapse
Now that's good news. Any advances on getting nvflash working?

Apache14 said:
New root method found will be out ~30th (to avoid the next OTA)
This allows custom recovery + boot image being flashed to the device
So all you US users can relax
I still do not have a device tho
PS.
This method is a team effort so credit is split
Click to expand...
Click to collapse
Italian Transformer here and now I discovered another update, the second form me since the day-one. Can I update or not?
Thanks

Apache14 said:
New root method found will be out ~30th (to avoid the next OTA)
This allows custom recovery + boot image being flashed to the device
So all you US users can relax
I still do not have a device tho
PS.
This method is a team effort so credit is split
Click to expand...
Click to collapse
good stuff!
I'm probably getting one of these in a month or so and was worried about this

Just got my TF and attempted to Root. I press volume up as soon as prompted...
But, then it freezes at "Booting recovery kernel image"
Running "WW_epad-8.2.3.6-20110414"
Guessing it updated somehow without my knowing as the first time it booted it was running a 03/11 build....
I saw a reference to a 04-15 build... Could that really have been the 04-14 build? Is that why it isn't booting the recovery on my sdcard?
===========================
Disregard: I read on the MoDaCo forum that it won't work with the 04/14 build. :-( DAMN!

New Root Method In First Post

now I'm familiar with ADB after messing around with my HTC hero in the past but what is an insecure boot image?

Related

Best way to root

Hey everyone,
Pray tell: what is the easiest way to root my TF and keep existing firmware? I'd like to have the option of flashing new roms and kernels down the road. I keep hearing that rooting takes less than 10 minutes, but the guides I'm seeing require ADB (which requires JDK) and some asus crapware that I just don't want to fill my computer with.
I remember how easy rooting was on the Gtab (upload a new recovery.zip to an SD card and reboot) and I'm hoping that it can be as easy here.
Thanks!
There's two way to root
http://androidroot.mobi/2011/06/13/nvflash-on-asus-transformer/
http://androidroot.mobi/asus-eee-pad-transformer-tf101-root-cwm-recovery/
read up and see what's "easier" for you.
See here http://forum.xda-developers.com/showthread.php?t=1125714
Pure Root 3.1 in Development-section. Extremely easy, did it twice in 2 days on 2 different TF's, 100% succes (guaranteed)
Good Luck
+1
Done one on Thursday and one last Monday. Works perfectly!
Skickat från min ASUS Eee Pad TF101
Ok, I got it. Once all the pre-reqs were in place, it wasn't so bad. Now I just have to uninstall all the garbage that asus loaded onto my pc. Thanks!
Is this root it still valid for Tf with all the latest updates (3.1, 8445 build)?
http://briefmobile.com/root-asus-transformer-on-android-3-1
Please help, I am new to Tf and Android. I can do hackintosh and iOS jailbreak. But this rooting thing is all new to me. It's all very confusing. Why are there so many different out there, e.g., in the developer section of this forum? What is Prime?
Finally, what is the downside of rooting? Some seemed to suggest you may not getting a dock firmware update, or app missing from market? What happens with the next android update if rooted?
Sorry for all the questions, I couldn't find a nice intro guide on Tf rooting for dummies.
ikeny said:
Is this root it still valid for Tf with all the latest updates (3.1, 8445 build)?
http://briefmobile.com/root-asus-transformer-on-android-3-1
Please help, I am new to Tf and Android. I can do hackintosh and iOS jailbreak. But this rooting thing is all new to me. It's all very confusing. Why are there so many different out there, e.g., in the developer section of this forum? What is Prime?
Finally, what is the downside of rooting? Some seemed to suggest you may not getting a dock firmware update, or app missing from market? What happens with the next android update if rooted?
Sorry for all the questions, I couldn't find a nice intro guide on Tf rooting for dummies.
Click to expand...
Click to collapse
Think of rooting as jailbreaking on steroids. "Root" in linux parlance means superuser: a system account with permission to do anything. Jailbreaking gives you the same thing, but jailbreaking does not give you the ability to install new firmware, which rooting does.
Prime is a ROM: a custom firmware. Unlike in the iOS world, android "allows" you to load a whole new operating system that you create yourself or someone else created (referred to as a ROM) onto your device. The ROMs are still Android operating systems, but there are a few advantages:
1) Unlike iOS updates, android updates don't get pushed out to everyone at the same time. Even if an update is available for your device, there is no guarantee that your phone carrier will push it out to you or won't sit on their hands for six months before doing it, effectively crippling your phone. A custom ROM allows you to bypass your carrier and load the updates yourself. This is not as big an issue on the transformer because there's no carrier to speak of. Still, if Asus takes its sweet time releasing the next version of android, you can bet it will be up here as a ROM first;
2) Most ROMs take out crapware that you don't want on your device; and
3) Many ROMs include performance optimizations or overclocks that wouldn't otherwise be possible.
I'm actually not sure if rooting by itself disables Asus updates...I don't think it does (but someone can correct me if I'm wrong). However, if you load Prime or another custom ROM, you will not have updates because there is nothing to update: you are not running Asus firmware anymore. You will have to wait for the developers of Prime to release new versions and flash them manually. Another downside of rooting is that you can lose you warranty. But if you root and need to make use of warranty, you can just unroot (see threads on that).
Hope that helps.
I've been looking to root my eepad. Running 3.2 stock
I've been lurking the forums for a little over a week but not sure if the nvflash method will work with the new update.
I've been reading through the unbricking thread, and this looks to be the easiest way to flash the device. but I still havent seen any confirmations that someone with 3.2 has performed the root.
http://forum.xda-developers.com/showthread.php?t=1123429&page=30
Unfortunately, since i've been lurking and reading, and not posting, I can't post in that thread to ask yet, since I don't have enough posts.
Here is my current build on the TF.
3.2
GPS: v1.5.0
WiFi: v5.2.52
BT: v6.19
kernel: 2.6.36.3 [email protected] #1
Build #: 8.6.5.6-20110726
many thanks for any assistance
-Ry
just wanted to add, I did some more digging on the Dev section and found BRK's method to root.
I read through the thread and they stated was functioning with stock non-rooted 3.2 running 8.6.5.6
I tried it out and it worked without a hitch!!!
YAAHOOOO!
installed cicso's anyconnect VPN client and Boom superuser access granted!
For anyone else wanting to try, make sure to just read through the instructions, then re-read, and re-read one more time. then take your time and you'll be good to go.
all the best!
-Ry
Find a good area, with plenty of sunlight. A steady supply of water is good as well. Be sure the ground is rich in nutrients.

Thinking of rooting, questions

Hey guys! New and proud TF300T owner. I got it last Friday and am absolutely LOVING it so far. This will be my 8th android device of all time and I am starting to get that itch to root it. First and foremost, i'm on the .30 firmware. This is the newest version and it updated as soon as i turned it on. I'm hoping that won't be a problem.
My first question, should i root? I'm loving ICS and i haven't seen a LOT of different ROMs available in the thread. Since this is my first android Tablet i'm sort of asking myself, why should i root? The Pad is very, very fast. The OS is nearly perfect. So i'm wondering, besides the obvious "Because we can" answer, why did you root yours?
I saw this guide :
http://forum.xda-developers.com/showthread.php?t=1706588
Do you guys think its the best way to go? Should i unlock w/Asus tool before i start this guide? Can anyone recommend a rom? I heard CM10 is coming to the 300 and i have always loved Cyan since my days with the G1.
So, in conclusion.
1. What do you, personally, feel are the advantages?
2. Is the guide above the SAFEST way to root? (DEFINITELY don't want a brick)
3. Unlock bootloader?
4. Roms?
5. If it ain't broke, don't fix it? Or - If it ain't root, lets break it? hehehe
Thanks in advance for your responses!!!
It all depends on you. I rooted mine and am using CM10 (Jellybean 4.1.1) and love it. Stock is actually pretty good though on this device, usually stock Android blows. I would think you would have to be dumb to brick your device at this stage, everything is pretty simple, and you have ways to getting back to stock with ease anyway.
This is what I did. I unlocked my boot loader using the tool from asus, I then flashed CMW from here - http://forum.xda-developers.com/showthread.php?t=1668173 , after booting into fast boot (power on, hold down vol, on the next screen you have three icons, select the middle one), and then flashed the root file. You have to put your ROMs you want to flash on the tablet memory, CMW doesn't support external memory yet.
Have fun!
Turbojugend said:
It all depends on you. I rooted mine and am using CM10 (Jellybean 4.1.1) and love it. Stock is actually pretty good though on this device, usually stock Android blows. I would think you would have to be dumb to brick your device at this stage, everything is pretty simple, and you have ways to getting back to stock with ease anyway.
This is what I did. I unlocked my boot loader using the tool from asus, I then flashed CMW from here - http://forum.xda-developers.com/showthread.php?t=1668173 , after booting into fast boot (power on, hold down vol, on the next screen you have three icons, select the middle one), and then flashed the root file. You have to put your ROMs you want to flash on the tablet memory, CMW doesn't support external memory yet.
Have fun!
Click to expand...
Click to collapse
I question for you? Now that you are running CM10 Jellybean, do you see any improvement with the I/O problem (very slow R/W) and what about flash player? Thanks
Sent from my ASUS Transformer Pad TF300T using Tapatalk 2
1. What do you, personally, feel are the advantages?
adjust settings, and run cmd's or scripts from cmd line
which can not be done without root
lots apps require root as well
2. Is the guide above the SAFEST way to root? (DEFINITELY don't want a brick)
yes the debugfs link you posted is the safest way to root, and it is drop dead easy
3. Unlock bootloader?
I did, and I don't regret
4. Roms?
hydro is based on stock and is smokin fast
night and day difference
5. If it ain't broke, don't fix it? Or - If it ain't root, lets break it? hehehe
if it aint root, let's break it!
I could not handle not having root
there's too many things I do that require it
Thanks for the great responses guys! Think i'll go ahead and get started...So,
1.Asus Unlock Tool
2. Root
3. TWRP flash, back up current rom (http://www.youtube.com/watch?feature=player_embedded&v=D2ATyGP5JAk#!) using this guide
4. Flash rom!
5. Success!
Sound right?
thatisandwas said:
Thanks for the great responses guys! Think i'll go ahead and get started...So,
1.Asus Unlock Tool
2. Root
3. TWRP flash, back up current rom (http://www.youtube.com/watch?feature=player_embedded&v=D2ATyGP5JAk#!) using this guide
4. Flash rom!
5. Success!
Sound right?
Click to expand...
Click to collapse
sounds right, I do have 1 suggestion or maybe just a simplification
if you plan to use TWRP
download gooManager from the play store, it has an option that will install TWRP for you automatically
and also don't forget
step 3.5 go into TWRP and make a nandroid backup, and copy the backup to somewhere same
I doubt you'll have any issues, but better to have a backup
and not need it
than need a backup and not have it
Just my personal opinion ... unless you just have to have a custom ROM, forget unlocking and just root it. You won't violate your warranty and we're going to be getting jelly bean in a few months from Asus. This is exactly what I did running v30 and I'm loving it this way. Stock ROM isn't too bloated.
Sent from my ASUS Transformer Pad TF300T using xda app-developers app
Yeah...I haven't taken the plunge yet. Its my day off and i love tinkering with stuff like this but i'm just having a hard time justifying unlocking/flashing on a device that already performs so well. Torn!
thatisandwas said:
Hey guys! New and proud TF300T owner. I got it last Friday and am absolutely LOVING it so far. This will be my 8th android device of all time and I am starting to get that itch to root it. First and foremost, i'm on the .30 firmware. This is the newest version and it updated as soon as i turned it on. I'm hoping that won't be a problem.
My first question, should i root? I'm loving ICS and i haven't seen a LOT of different ROMs available in the thread.
Click to expand...
Click to collapse
First answer, rooting isn't the same as unlocking and flashing! You can root without unlocking, like others have said there aren't that many ROMs out there and the stock is pretty good IMO.
tf300..
KAD79 said:
sounds right, I do have 1 suggestion or maybe just a simplification
if you plan to use TWRP
download gooManager from the play store, it has an option that will install TWRP for you automatically
and also don't forget
step 3.5 go into TWRP and make a nandroid backup, and copy the backup to somewhere same
I doubt you'll have any issues, but better to have a backup
and not need it
than need a backup and not have it
Click to expand...
Click to collapse
Hey, I just unlocked my tf300-will I not be able to get jellybean at all when it comes out?!
You will have to flash the stock update through cwm or twrp, whichever recovery you used.
Sent from my Transformer Pad TF300T using xda premium
I havent unlocked yet but its my day off now and im thinking about doing it now. The only thing im worried about is i keep seeing people having issues like "soft brick after restore"...i mean whats that about? I have backed up/restored and flashed a million roms on all my other unlocked android devices over the years and have NEVER had a soft brick just doing a restart? I mean i suppose ive gotten a bad rom before that wouldnt boot but when that happens i just usually go back to recovery and restore what i had before. Also, it seems like TWRP has more issues then CWM at this point. Is that just me, or is that true ? What the advantage of TWRP then if that is the case? Sigh...I wanna unlock and flash it so bad! But i just can't bring myself to do it for some reason!

So you are all experts, what about newbies?(Root, Unlock, OTA etc..)

Dear friends,
as i have been hanging out in this forum, i have learnt a lot. But still, i cannot understand the attitude why people treat, reply or explain everything in a way that assumes all of us are android experts.
TF700 is my first android device(have been using Apple before) so I really need to improve-or create- fundamental knowledge. Just for your information, replying messages like; "ok now Unlock the Root system instead OTA .21 and blablablabla?" (btw. i am well aware of the fact that this sentence is totally meaningless)
Whatever, my point is it would be wonderful to have a fundamental knowledge thread, also keeping your great posts too at the same time.
Cheers!!
archonur said:
Dear friends,
as i have been hanging out in this forum, i have learnt a lot. But still, i cannot understand the attitude why people treat, reply or explain everything in a way that assumes all of us are android experts.
TF700 is my first android device(have been using Apple before) so I really need to improve-or create- fundamental knowledge. Just for your information, replying messages like; "ok now Unlock the Root system instead OTA .21 and blablablabla?" (btw. i am well aware of the fact that this sentence is totally meaningless)
Whatever, my point is it would be wonderful to have a fundamental knowledge thread, also keeping your great posts too at the same time.
Cheers!!
Click to expand...
Click to collapse
I am a newbie too -- bought the tf101 a couple of months ago - loved it -- told my husband he could have it - I was buying the 700 ! and was lucky enough to be able to order one (we live in Canada..... Tiger Direct.ca had them)
I have learned a lot from this forum -- glad I found it --- but I won't be "unlocking" anything ! the only thing I know how to "root" are my house plants !!! lol !! we don't even own smart phones yet -- we still have dumb phones !!! but I have my TF700 !!!
You mean sth like this?
seems hard, but it's not.
It seems tough in the beginning for noob, but actually you're going to get it. You should read the "Index" pointing out by d14b0ll0s to gain some basic knowledge and familiar with the terminology then you should be fine. Couple key words I want to point out that you should know. Currently TF700 came with a locked boot loader, meaning you not able to flash (install) custom firmware from our developers. This is a biggest issue at the moment. Sure there're workaround but it's a pain in the as...and unstable(could brick your pad if you not doing it right). When you see numbers like 21,22,26, they are firmware version number. The latest should be 26. OTA stands for "over the air" and we referred to firmware push to our pad by Asus, not manually download and install ourselves. Rooted is a process that you gain access as a administrator on your pad (you have full access to your phone), with rooted privilege you can almost do anything with your pad, like uninstall Asus embed software, do a full backup of your entire OS (operating system), modified system files etc... CWM is a tool you installed on your pad in order to flash (install) custom firmware. So at the minimum you should have root, and in the future when new custom firmware arrived, you can install cwm and used this tool to flash them. Keep in mind that with locked boot loader, you can't flash custom firmware. Finally, once you're rooted or have custom firmware installed, your pad will no longer can accepted OTA firmware (firmware push to your pad by Asus). In this case you need to roll back to stock (re installed factory firmware and no root), before you can do OTA update. Currently, I suggest you should stay on the side line and waiting for the OTA 4.1.1 JB (new Operating System called Jelly Bean, version 4.1.1 will be push to your pad by Asus). After reading this post you should be ready to play... good luck!
Sorry, but I don't get it, what is it about Verizon? Is it because you bought yours from Verizon? Mine comes from ASUS and I believe the OTA updates are from ASUS servers. Is it the US-specific thing that you mentioned?
Yeah... Everything is pretty easy even for people that have no clue what they are doing. My suggestion right now is to root but not unlock. Rooting is as simple as running the .bat file and following on screen directions (assuming you are using Windows). The only thing you need to do after the program is finished is to open up the Superuser app (might be SuperSU) and restart after that for safe measure.
Unlocking does VOID YOUR MANUFACTURERS WARRANTY (and possibly all others you may have purchased). Make sure you know what you want to do with an unlocked device before you do it. Personally, I am waiting for a stable JB build before I unlock. But the choice is ultimately up to you.
d14b0ll0s said:
Sorry, but I don't get it, what is it about Verizon? Is it because you bought yours from Verizon? Mine comes from ASUS and I believe the OTA updates are from ASUS servers. Is it the US-specific thing that you mentioned?
Click to expand...
Click to collapse
Sorry you're right, must not awake yet. ASUS that is. Thanks bro.
Your going to be fine try learning how to build aosp from source in a time limit
Sent from my Galaxy Nexus using xda premium
Skullmonkey said:
Yeah... Everything is pretty easy even for people that have no clue what they are doing. My suggestion right now is to root but not unlock. Rooting is as simple as running the .bat file and following on screen directions (assuming you are using Windows). The only thing you need to do after the program is finished is to open up the Superuser app (might be SuperSU) and restart after that for safe measure.
Unlocking does VOID YOUR MANUFACTURERS WARRANTY (and possibly all others you may have purchased). Make sure you know what you want to do with an unlocked device before you do it. Personally, I am waiting for a stable JB build before I unlock. But the choice is ultimately up to you.
Click to expand...
Click to collapse
I agree with Skullmonkey on this. Until you are ready for really hacking the system, all you really need is to root the system (run the DebugFS) to get "administrator access to your device".
You might want to read what buhohitr wrote several times as there is much to be gleaned from it. If it helps, copy/paste the contents of buhohitr's repsonse to a notepad text document and go through it word-for-word, isolate those that you find questionable or troublesome, then research what those words are. Anything that is "super difficult" you can just post back here in the Q&A section and I'm sure someone will help you in no time.
another noob question: does rooting the device void manufacturing warranty?
It does not. Only unlocking the device does.
Sent from my Transformer Infinity!
So if I root my Infinity...
...which pre-included apps can I get rid of?
Also which preloaded apps are best to bump off if I dare a root?
I have never dabbled with android down in the file system much for fear of doing something irreparable.
Well, to the OP: we already have quite a few 'basic' threads going on here, and no one forces you to embark on the more advanced stuff, do we? Just read up on it, and when you feel like you can make the jump, pick it up little by little. We're not all experts in here, but most of us can follow directions of the gurus really good, and we have the advantage of knowing how to save our butts when the excrement impacts the ventilator. (And most of us learnt it the hard way, by bricking and breaking...)
You should be fine in the regular forums, and as the others have said, stay out of the development sections until you feel secure enough to dabble around with unlocking and so on.
Sent from my ASUS Transformer Pad TF700T
buhohitr said:
Currently, I suggest you should stay on the side line and waiting for the OTA 4.1.1 JB (new Operating System called Jelly Bean, version 4.1.1 will be push to your pad by Asus). After reading this post you should be ready to play... good luck!
Click to expand...
Click to collapse
What's the method for unrooting/reflashing to stock at the moment? I rooted because I wanted to use Titanium Backup right after I got back up to .26. If we haven't figured out how to custom flash roms by the time jellybean comes out, I'll need to go back to stock. I would *hate* to have to lose all my apps, and its possible that titanium backup from 4.0.3 to 4.1.1 might royally screw up the system in doing a restore. So, if that's the case, I guess I'll reflash someway and lose everything? Doh.
spinaldex said:
What's the method for unrooting/reflashing to stock at the moment? I rooted because I wanted to use Titanium Backup right after I got back up to .26. If we haven't figured out how to custom flash roms by the time jellybean comes out, I'll need to go back to stock. I would *hate* to have to lose all my apps, and its possible that titanium backup from 4.0.3 to 4.1.1 might royally screw up the system in doing a restore. So, if that's the case, I guess I'll reflash someway and lose everything? Doh.
Click to expand...
Click to collapse
Anyone figure out a way to go back from root back to stock yet so that when Jelly Bean comes out we can upgrade?
spinaldex said:
Anyone figure out a way to go back from root back to stock yet so that when Jelly Bean comes out we can upgrade?
Click to expand...
Click to collapse
One method to get rid of root would be factory reset (power on while holding both the power and volume down while booting and running a factory reset.) But you could probably temporarily unroot with voodoo ota root keeper and then reroot once you install the upgrade to jelly bean with its root keeper.
Sent from my DROIDX using xda app-developers app
ekalb10 said:
One method to get rid of root would be factory reset (power on while holding both the power and volume down while booting and running a factory reset.) But you could probably temporarily unroot with voodoo ota root keeper and then reroot once you install the upgrade to jelly bean with its root keeper.
Click to expand...
Click to collapse
That's not true. Funny I've been responding to the same kind of "advice" a few minutes ago in another thread.
Temporarily unrooting through Root Keeper should work, but rooting has prevented updating firmware only for some users. I was rooted and installed updates both manually and through OTA without experiencing any issues. Getting to stock /system partition basically means restoring stock configuration files (like build.prop etc.), removing /system/xbin/su and any copies made by RootKeeper, as well as things that install to /system like BusyBox.
Even if you're rooted you should be able to update firmware manually through stock recovery (power down, power up, hold power and volume down, release, press volume up, etc., with microSD formatted FAT32 and with EP201_768_SDUPDATE on it, it's already in the how-to threads in the general section).
d14b0ll0s said:
That's not true. Funny I've been responding to the same kind of "advice" a few minutes ago in another thread.
Temporarily unrooting through Root Keeper should work, but rooting has prevented updating firmware only for some users. I was rooted and installed updates both manually and through OTA without experiencing any issues. Getting to stock /system partition basically means restoring stock configuration files (like build.prop etc.), removing /system/xbin/su and any copies made by RootKeeper, as well as things that install to /system like BusyBox.
Even if you're rooted you should be able to update firmware manually through stock recovery (power down, power up, hold power and volume down, release, press volume up, etc., with microSD formatted FAT32 and with EP201_768_SDUPDATE on it, it's already in the how-to threads in the general section).
Click to expand...
Click to collapse
I guess I was just misinformed on the factory reset, sorry if I confused anyone.
Sent from my ASUS Transformer Pad TF700T using XDA Premium HD app
d14b0ll0s said:
That's not true. Funny I've been responding to the same kind of "advice" a few minutes ago in another thread.
Temporarily unrooting through Root Keeper should work, but rooting has prevented updating firmware only for some users. I was rooted and installed updates both manually and through OTA without experiencing any issues. Getting to stock /system partition basically means restoring stock configuration files (like build.prop etc.), removing /system/xbin/su and any copies made by RootKeeper, as well as things that install to /system like BusyBox.
Even if you're rooted you should be able to update firmware manually through stock recovery (power down, power up, hold power and volume down, release, press volume up, etc., with microSD formatted FAT32 and with EP201_768_SDUPDATE on it, it's already in the how-to threads in the general section).
Click to expand...
Click to collapse
+ 1 I have rooted several tablets/phone over the last two years and backed it up using voodoo rootkeeper with ZERO issues updating firmware/OTAS. The only thing that happens after updating is that I loose root, but that's where voodoo OTA rootkeeper comes to play. Only a handful of people have had problems. Some are legit while others have messed/modded their device prior to updates. (like removeing system apps or modding build. Props)
"60% of the time, it works everytime. "
Sent from my ASUS Transformer Pad TF700T using xda app-developers app
Unroot it again ??
If there are problems with the tablet and it must be repaired on warranty, then I need to unroot it again.
How do I unroot it again ??
Regards Peder

[Q] A700 rooting question

Hi guys,
I've searched everywhere and can't get a definitive answer on this so here goes -
I'm a noob when it comes to Android, having recently defected from being an Apple Disciple (I got hacked off with iTunes and bored in general with the Daycare Centre which is iOS) and have recently acquired an Acer A700 tablet.
I have installed the JB update OTA and everything is working fine and am chomping at the bit to get it booted, but most of the posts I have read regarding unlocking the bootloader and rooting it relate to ICS.
My questions are -
Does the bootloader process apply regardless of Firmware? (Are there different versions for different Firmwares)
Can anyone point me in the direction of a decent tutorial on how to do this?
What happens regarding a future update? Do I have to revert back to stock and update from there or can i jump from one ROM to another? (I'm assuming that I can't use the OTA updates any more)
Sorry for the long OP and thanks in advance for your answers.
ianrobbie said:
Hi guys,
I've searched everywhere and can't get a definitive answer on this so here goes -
I'm a noob when it comes to Android, having recently defected from being an Apple Disciple (I got hacked off with iTunes and bored in general with the Daycare Centre which is iOS) and have recently acquired an Acer A700 tablet.
I have installed the JB update OTA and everything is working fine and am chomping at the bit to get it booted, but most of the posts I have read regarding unlocking the bootloader and rooting it relate to ICS.
My questions are -
Does the bootloader process apply regardless of Firmware? (Are there different versions for different Firmwares)
Can anyone point me in the direction of a decent tutorial on how to do this?
What happens regarding a future update? Do I have to revert back to stock and update from there or can i jump from one ROM to another? (I'm assuming that I can't use the OTA updates any more)
Sorry for the long OP and thanks in advance for your answers.
Click to expand...
Click to collapse
No problem. Seeing you are on JB, then you have a JB bootloader.
You need to go here http://forum.xda-developers.com/showthread.php?t=1953917
And download Vorbeths easyroot2.0. It's for the 700.
You have to unlock your bootloader first, which shouldn't be an issue for you. Easy instructions for that.
Then download his package to a folder on your PC. (not sure, but you may have to download each file individually) Open a command window (shift & right mouse click) and type in whatever his instructions say. Should be painless.
Make sure USB Debugging is turned on first in your tablet (Settings/Developer Options/USB Debugging), and make sure you have the Acer Drivers installed on your PC.
Then connect, wait 30 seconds, and run his batch file.
You should be ok.
MD
Oh yes, one more thing, once you unlock your bootloader, chances are you will not be able to get OTA. And the only way to re-lock the bootloader is to install a stock rom.
Thanks!
Thanks for the reply. I am now the owner of a fully rooted A700!
Had a few issues during unlocking the bootloader. That thing timeouts quick! Also, didn't realise you had to run the .bat file while the tablet was on the Bootloader USB protocol screen. I thought you had to wait until it booted fully into JB.
Anyway, took the plunge and thanks again for your help.
ianrobbie said:
Thanks for the reply. I am now the owner of a fully rooted A700!
Had a few issues during unlocking the bootloader. That thing timeouts quick! Also, didn't realise you had to run the .bat file while the tablet was on the Bootloader USB protocol screen. I thought you had to wait until it booted fully into JB.
Anyway, took the plunge and thanks again for your help.
Click to expand...
Click to collapse
No problem. I thought I mentioned it timed out in about 5 seconds These days I don't remember much
Yeah, I haven't looked at Vorbeth's script, so I don't know which screen he launches it from. With mine for the 701, you can be when the tab is running normal. No difference in the end result though
Happy Hunting!
MD
One last question - do I have to install Clockwork Recovery for re-flashing the stock images or is it just a case of renaming it update. zip and putting it on an SD Card? Any chance you can point me in the right direction of the most recent/stable build? Is it easy to install?
Thanks again.
Sent from my GT-I9305 using xda app-developers app
ianrobbie said:
One last question - do I have to install Clockwork Recovery for re-flashing the stock images or is it just a case of renaming it update. zip and putting it on an SD Card? Any chance you can point me in the right direction of the most recent/stable build? Is it easy to install?
Thanks again.
Sent from my GT-I9305 using xda app-developers app
Click to expand...
Click to collapse
Well, this is a trouble spot.
If you wish to install a custom rom, then you will need to install CWM. The most recent version.
If you want to try your luck at installing a stock rom, my opinion, is to leave the stock recovery inplace. I haven't had luck in installing stock update.zips, as Acer has made them very specific. So I can't be much help to you in that.
However, you can always flash back to CWM or a stock JB recovery pretty easy. Personally, unless you plan on flashing a custom, I would just leave the stock recovery.
MD
Sometimes "leaked" update appear here in the forums. They are unofficial. And you never know if they improve things, or make things worse. So be careful.
Moscow Desire said:
Well, this is a trouble spot.
If you wish to install a custom rom, then you will need to install CWM. The most recent version.
If you want to try your luck at installing a stock rom, my opinion, is to leave the stock recovery inplace. I haven't had luck in installing stock update.zips, as Acer has made them very specific. So I can't be much help to you in that.
However, you can always flash back to CWM or a stock JB recovery pretty easy. Personally, unless you plan on flashing a custom, I would just leave the stock recovery.
MD
Sometimes "leaked" update appear here in the forums. They are unofficial. And you never know if they improve things, or make things worse. So be careful.
Click to expand...
Click to collapse
So, just for future reference, how would I go about re-flashing the stock image? I'm assuming it's saved on the tablet in a separate partition?
I've decided to stick with the stock rooted ROM but would like to know how to re-flash for when Key Lime Pie and future updates are released.
And, seeing as how you haven't steered me wrong so far, I though I'd pick your brains one last time.
Hope you don't mind!

[Q]

Hi everyone
First off I would like to thank everyone who contributes on this board, I have been lurking for quite awhile even though I dont have any android devices, the reading is very interesting.
I have just got my first android device today delivered from BH Photo (I am in Australia) and have charged and powered it up. I have been reading on the forums about rooting and then unlocking. The android version appears to be 4.0.3 (ICS).
My questions are these:
Should I root this device and unlock the bootloader with ICS, then install TWRP and make a backup of it. Once this is done then update to JB? The firmware of the tablet is (I think this is right) IM74K:US_epad_9.4.5.26-20120720 and the kernel is 2.6.39.4 [email protected] #1
or
Update the device to JB then root it, but Im a bit confused with the unlocking part here what program is used to unlock the bootloader? Is it the Asus one? Also with rooting programs which one is more commonly used for both ICS and JB? Can I apply a manual update of JB using the Ausrtalian version instead of the US one.
Sorry for all the noob questions. I have read the index and after reading it still had some questions.
Thank you for your time
deathwalker01 said:
Hi everyone
First off I would like to thank everyone who contributes on this board, I have been lurking for quite awhile even though I dont have any android devices, the reading is very interesting.
I have just got my first android device today delivered from BH Photo (I am in Australia) and have charged and powered it up. I have been reading on the forums about rooting and then unlocking. The android version appears to be 4.0.3 (ICS).
My questions are these:
Should I root this device and unlock the bootloader with ICS, then install TWRP and make a backup of it. Once this is done then update to JB? The firmware of the tablet is (I think this is right) IM74K:US_epad_9.4.5.26-20120720 and the kernel is 2.6.39.4 [email protected] #1
or
Update the device to JB then root it, but Im a bit confused with the unlocking part here what program is used to unlock the bootloader? Is it the Asus one? Also with rooting programs which one is more commonly used for both ICS and JB? Can I apply a manual update of JB using the Ausrtalian version instead of the US one.
Sorry for all the noob questions. I have read the index and after reading it still had some questions.
Thank you for your time
Click to expand...
Click to collapse
Welcome to the Community!
There are a few on-going threads regarding this same topic. You might want to read those and make sure you understand the lingo/jargon being used (like: fastboot, bootloader, Recovery, adb. etc) as well as what it's for before you start your hacking.
Some things to keep in mind
Currently to have Root access in JB, you need to get root in ICS then use OTA Keeper to maintain Root for JB update.
The Bootloader unlocker tool is from ASUS and needs to communicate with ASUS servers for it to unlock.
Unlocking the bootloader will void your warrenty. Make sure you have a good device before you do it.
You have a version of tablet (9.4.5.26) that is able to use NVFlash that can help recover your tablet during a soft brick.
You should use an update that is appropriate for your device. If it comes with US, stay with US. Installing an update for a different region might not cause problems but there is no guarantee. Best to avoid the possibility by staying with the region it comes with.
For some reading material, I think that my blog post might help give you some additional details. However, I highly suggest that it be used for research only until you are aware of exactly what you are trying to accomplish. Remember to ask questions if things are confusing or if you are wondering what needs to be done next. 'Tis better to ask and be delayed than to be over-eager and bricked.
Hope this helps you during your first steps of XDA Android hacking!
I just got my TF700 last week and I wanted cleanrom on it and this is the order of stuff I did:
1. Unlocked bootloader
2. Nvflash setup
3. Installed TWRP
4. Flashed official Asus update
5. I lost TWRP so I installed it again
6. Flashed cleanrom
Probably not the most efficient way, but it was easy to do and didn't take too long.
hong90 said:
I just got my TF700 last week and I wanted cleanrom on it and this is the order of stuff I did:
1. Unlocked bootloader
2. Nvflash setup
3. Installed TWRP
4. Flashed official Asus update
5. I lost TWRP so I installed it again
6. Flashed cleanrom
Probably not the most efficient way, but it was easy to do and didn't take too long.
Click to expand...
Click to collapse
It's the most efficient way.
I have nothing to add except for the remark that NvFlash is key -- GET IT WHILE YOU STILL CAN!
I'm not even kidding here. It gives you 100% flexibility in doing whatever you wish (up- as well as downgrading, even the bootloader!) and provides a key benefit in recovering your device when that whale-sized piece of excrement hits the large ventilator running at top speed.
Thanks to everyone that has replied to my post. I have successfully rooted the tablet and unlocked the bootloader. Before I do anything else Im going to run NVflash and back it up. I have a quick question though. I have download NVFlash to my computer and extracted it. Do I need to copy it across to the tablet and then enter fastboot? I havent got an extenal sd card will it save the images to the tablet's hard drive?
Cheers
Deathwalker
i followed this video:
https://www.youtube.com/watch?v=J3ypzUaKxvo&feature=youtube_gdata_player
i watched it before i actually did it once or twice to make sure i know what to do. you don't need an external sd card. following the fastboot steps will pull the files that you need onto the internal one in a folder
Last night I used NVFlash to make backup of the tablet. A big thank you to alienedd as I followed his blog and also the guide from androidmobi team and managed to get the img files done. Is there anyway to test bar for wiping the tablet?
Now all I have left to do is install OTA RootKeeper and TWRP, back up the existing tablet and then flash a custom ROM (Im thinking cleanrom)
You don't need OTA Rootkeeper anymore because you have unlocked you're bootloader. And custom roms like Cleanrom are already pre-rooted so after flashing the cleanrom you will have root anyway.

Categories

Resources