Database Info

[Q] Arabic support for Gingerbread 2.3.4

Updating my Samsung GS2 to Gingerbread XXKG1 2.3.4 Firmware lost me the Arabic support added under 2.3.3
Is there yet Arabic support for Gingerbread 2.3.4? If not, is it advisable to restore 2.3.3?
Cheers.

Same Here
Same here, I am searching for Arabic support as well.
Thanks

Arabic Support in SGS2 with Gingerbread 2.3.4
Lonexl:
If you're in a rush that you can't wait till the official release of the arabized 2.3.4 then your only choice would be to to switch to a deodexed rom (I am using Darky's ROM) - google " rom-base-sgs2-2-3-4-darkyrom2-xxkg1-base.4059 " to get it
The problem with this is that the programs/browsers that use the support library "libwebcore.so" will not be able to render Arabic correctly due to the fact that till date no one successfully compiled libwebcore.so from the webkit provided by samsung with arabic support patched in; However, firefox should work fine with stock font.
If that doesn't matter then after flashing the ROM just apply the update attached in this post using ClockWorkMod Recovery or simply upload the files framework.jar into /system/framework; libicuuc-arabic.so & libanrdoid_runtime.so into /system/lib using root explorer or any other method/tool.
Cheers.

brightidea said:
Lonexl:
If you're in a rush that you can't wait till the official release of the arabized 2.3.4 then your only choice would be to to switch to a deodexed rom (I am using Darky's ROM) - google " rom-base-sgs2-2-3-4-darkyrom2-xxkg1-base.4059 " to get it
The problem with this is that the programs/browsers that use the support library "libwebcore.so" will not be able to render Arabic correctly due to the fact that till date no one successfully compiled libwebcore.so from the webkit provided by samsung with arabic support patched in; However, firefox should work fine with stock font.
If that doesn't matter then after flashing the ROM just apply the update attached in this post using ClockWorkMod Recovery or simply upload the files framework.jar into /system/framework; libicuuc-arabic.so & libanrdoid_runtime.so into /system/lib using root explorer or any other method/tool.
Cheers.
Click to expand...
Click to collapse
Thanks for your reply, although neither methods worked for me, perhaps this would benefit someone else....
Clockworkmod wont work on my mobile for some reason and attempting to copy the lib and jar files did not either using rom manager (getting permission errors).
So may be I have to wait for a simple firmware that can be fired away via good old Odin.

It should be straight-forward process to get CWM you need to flash a kernel with CWM built-in. I suggest that you try "CF-Root-SGS2_XW_CLK_KF3-v4.0-CWM4.zip" from this link http://forum.xda-developers.com/showthread.php?t=1103399
However, the one mentioned in Darky's thread "Supercore..1.0" should do anyway..
Once flashed you need to reboot your device with the three buttons down (power+home+up) to get the recovery menu. If you use that ROM you need to exercise patience as it will take a very long time to display the menu.
The stock ROM recovery will not allow you to flash the update because it's not signed by Samsung.

Thanks mate for your message. Athough i really appreciate your help must admit, I found the above message rather confusing.
"If you use that ROM (Which ROM are you referring to) you need to exercise patience as it will take a very long time to display the menu. The follow on step is not clear either.
When I installed arabic support to my SGS2 2.3.3 via one firmware & ODIN, straightforward process.... and for the non-tech "occaisional users" like yours sincerely the easiest way is to Start Odin, load firmware, click start and.... bingo.
Lookslike I will either have to wait for such firmware or search other sites.
Cheers.

SGS2 xxkg1 (european firmware): libwebcore.so with arabic shaping
I have made a patch which will enable arabic character shaping in the browser
*NOTE: This is only for Galaxy S2 with XXKG1 (2.3.4) (European Firmware – Deodexed)*
Use CWM to update using the zip file attached
*UPDATE* I have cooked a patch for SGS2 European XXKG3 (2.3.4). PM me in case you need a copy (for Deodexed Firmwares only).

brightidea said:
I have made a patch which will enable arabic character shaping in the browser
*NOTE: This is only for Galaxy S2 with XXKG1 (2.3.4) (European Firmware – Deodexed)*
Use CWM to update using the zip file attached
*UPDATE* I have cooked a patch for SGS2 European XXKG3 (2.3.4). PM me in case you need a copy (for Deodexed Firmwares only).
Click to expand...
Click to collapse
brightidea,
good to see you here
you got 6 more posts to start joining us in the dev section.
Go brightidea go !!
To everybody that don't know brightidea, he's the genius that brought patched libwebcore.so (yes, in binary form) and brought us proper arabic shaping for SGS2 2.3.4 ROMs.
I'm posting your files on my thread as we speak.

Thanks MadMack - 10 posts are not easy to make when not really familiar with the platform but I am trying: )
Sent from my GT-I9100 using XDA App

Dear brightidea
Can you this patch for galaxy sl i9003? i need to upgrade my phone to gingerbread 2.3.4.

Unknown_2517 said:
Dear brightidea
Can you this patch for galaxy sl i9003? i need to upgrade my phone to gingerbread 2.3.4.
Click to expand...
Click to collapse
I could try - can you give me more details about the rom you're going to upgrade to? A link should do.
Sent from my GT-I9100 using XDA App

rom name: I9003XXKPE ##
Android 2.3.4 2011 July 24
Download link: http://hotfile.com/dl/125246801/36c9b39/I9003XXKPE.rar.html
pass:samfirmware.com
Jazakallah Khaira...!

Unknown_2517 said:
rom name: I9003XXKPE ##
Android 2.3.4 2011 July 24
Download link: http://hotfile.com/dl/125246801/36c9b39/I9003XXKPE.rar.html
pass:samfirmware.com
Jazakallah Khaira...!
Click to expand...
Click to collapse
Can't you just send me libwebcore.so or a link to it? downloading the whole ROM is just too much.
- Brightidea.

Unknown_2517 said:
rom name: I9003XXKPE ##
Android 2.3.4 2011 July 24
Download link: http://hotfile.com/dl/125246801/36c9b39/I9003XXKPE.rar.html
pass:samfirmware.com
Jazakallah Khaira...!
Click to expand...
Click to collapse
Try this:
http://www.multiupload.com/SGJKQCJTB4
- Brightidea

is it possible to install Swype keyboard with Arabic support for the 2.3.4 ROM?

Arabic Support
Dear brightidea,
Thanks for the hardwork man.
my problem is the following:
I have a Samsung Galaxy SI, and i wanted to have the look & feel of Samsung Galaxy SII Galaxy so i had to update my mobile with 2.3.4 version, and had to do rooting for it, but while doing that, i lost the Arabic support on my phone & teh browser..
My phone is running the following:
Model: GT-I9000
Firmware version: 2.3.4
Baseband version: I9000XXJVP
Kernel version: [email protected] #Dark_Core_2.7.3.JVP
Build number: F1 Galaxy S2 V6
Is there a way to have Arabic support on my device? If yes, could you please help me with it?
Thank you in advance my friend.
Ibrahim Q. from Jordan

hima1978 said:
Dear brightidea,
Thanks for the hardwork man.
my problem is the following:
I have a Samsung Galaxy SI, and i wanted to have the look & feel of Samsung Galaxy SII Galaxy so i had to update my mobile with 2.3.4 version, and had to do rooting for it, but while doing that, i lost the Arabic support on my phone & teh browser..
My phone is running the following:
Model: GT-I9000
Firmware version: 2.3.4
Baseband version: I9000XXJVP
Kernel version: [email protected] #Dark_Core_2.7.3.JVP
Build number: F1 Galaxy S2 V6
Is there a way to have Arabic support on my device? If yes, could you please help me with it?
Thank you in advance my friend.
Ibrahim Q. from Jordan
Click to expand...
Click to collapse
Sorry I overlooked your post - do you still have problems with arabic support in your phone?
- Brightidea

Yes i still have this problem

hima1978 said:
Yes i still have this problem
Click to expand...
Click to collapse
Currently the best unofficial arabic support package is provided by brother Madmack and you should be able to get it from here http://blog.devasque.com but be warned it requires that your phone's system has been deodexed. You could use a package called xultimate to deodex your system automatically just make sure u actually use a version which employs the latest smali/baksmali (ver 1.2.8). Additionally you may just search the market for "brightidea browser arabic patch" to download the patch I built for the browser (which should be included in madmack's package anyway). Good luck.
- Brightidea

Arabic for Samsung GT-I5510
Dears
i have samsung GT-I5510 with latest firmware gingerbread 2.3.4 but i don't support Arabic is there any solution for this Hugh problem for me.
thank you

[ROM] [UBKPD] Gingerbread 2.3.6 (ARO) Argentina

Hi guys, finally i got the official firmware 2.3.6 from Argentina. Thanks to engelus and elkoko for this.
PDA:KPE / PHONE:KPD / CSC:KPE (ARO)
GT I9003L
Firmware 2.3.6
base band i9003lubkpd
kernel 2.6.35.7-cl746478
[email protected] 1
comp. gingerbread.ubkpe
This is the link: http://www.megaupload.com/?d=L9SKRMSS
Password: grupoandroid.com
It's a .rar file within the .tar (i post this for newbies) to flash.

The network drive can not download! I want this ROM, can not change the address to download!

CHINA-KANE said:
The network drive can not download! I want this ROM, can not change the address to download!
Click to expand...
Click to collapse
Thank you Kane, the link was of MegaUpload wich was turned off by the FBI.
Here is the new link provided by elkoko: http://www.mediafire.com/?pos9z8ffxaso958
Hope it would be usefull for you.

[Q] root for dummies - Samsung Galaxy S GT-19000

Hi, I have scoured the web for information but several hours later I am none the wiser.
I would like to root my device in order to optimize its performance. I am super confused about: cf-root, mobile/pc odin, android version, etc. I still have no idea what is appropriate for my device. :crying: Please point me in the right direction.
I have found may threads out there with very detailed instructions, but I can't figure out if that's what I need. I'm apparently on Gingerbread, but what do I need now? The Icecream, the other one?
Reason for rooting: phone too slow with so many apps loading themselves in the background. I want to be able to prevent all these [expletive deleted] apps from loading themselves automatically. I also want to remove the stock apps I don't need (but can't now remove). I'm tired of factory resetting every other week to improve performance.
Ultimate purpose: phone, sms, whatsapp, news. That's it. I don't need 3d porn or anything. :angel: My needs are extremely minimal.
Thanks for any pointers! :good:
Samsung Galaxy S
GT-19000
Firmware Version: 2.3.3
Baseband Version: I9000ZSJV6
Kernel Version: 2.6.35.7, [email protected]#2
Build number: GINGERBREAD.zsjv6

more info
Sewrizer said:
I have a friend who has the same phone model and is running JB 4.2.2 on a CM10.1 ROM and it is smooth.
Click to expand...
Click to collapse
Thanks Sewrizer. I'd rather brick the phone than pay for the service. I already have a more recent phone, so this is more of a second device. It's just that I like the typing better so I haven't completely stopped using it. I guess I'm sort of relishing the idea of an experiment with it as well.
Do you have a link to instructions for the above? If it works for your friend, it's good enough for me.
Unless I hear something back, I'm getting ready to try this:
EDIT: galaxy-s-i9000-android422-jellybean-slimbean-build3.htm
from: articles/454365/20130407/
ibtimes.co.uk
thanks a lot.

which cf-root?
Thanks Sewrizer. As it happens these are the instructions I started with, and from which a lot of confusion arose (I can't post urls yet).
The first link is to Odin3 v1.85, but I have found Odin3 v1.87. Not sure if there is a later version. It says somewhere that the latest version is best.
The second link is to a series of posts with many download links. Somewhere down the page it states that if you're confused, then:
First, go to Settings -> About phone -> Build number. It should say something like FROYO.xxJPy. It's primarily the JPy that we are interested in. Try to match that with a download link available in this (and the next few) posts. Some of the downloads dont just have JPy file name format, but are called xx_xxx_JPy.
Let me explain that. Samsung isn't always very precise in naming/marking their different (leaked) firmwares. CF-Root's are modified kernels, the filenames explain in more detail which exact firmware ROM the base kernel was taken from, for those experts who understand.
If you are not one of those people, go back to the JPy thing. The "y" in JPy is 0-9, A-Z. If they run out of numbers, they use letters. So A would be 10 (9 + 1), while Z would be 35 (9 + 26). Find the one that is closest to yours, if yours is not present, and flash that one.
Click to expand...
Click to collapse
Well, my build number is of the form GINGERBREAD.zsjv6, which doesn't fit the pattern described (I don't see any JPy, I see jv6), so which version of CF-Root should I download?
GT-19000. Firmware Version: 2.3.3. Baseband Version: I9000ZSJV6. Kernel Version:2.6.35.7. Build number: GINGERBREAD.zsjv6
Thanks!

How to root your S3
Hi, I used one available in droid lessons, but i'm not allowed to post links yet. Just look in google for droid lessons and then " How to Root the Samsung Galaxy S3 " It was really easy, and worked great for me.
annporci said:
Thanks Sewrizer. As it happens these are the instructions I started with, and from which a lot of confusion arose (I can't post urls yet).
The first link is to Odin3 v1.85, but I have found Odin3 v1.87. Not sure if there is a later version. It says somewhere that the latest version is best.
The second link is to a series of posts with many download links. Somewhere down the page it states that if you're confused, then:
Well, my build number is of the form GINGERBREAD.zsjv6, which doesn't fit the pattern described (I don't see any JPy, I see jv6), so which version of CF-Root should I download?
GT-19000. Firmware Version: 2.3.3. Baseband Version: I9000ZSJV6. Kernel Version:2.6.35.7. Build number: GINGERBREAD.zsjv6
Thanks!
Click to expand...
Click to collapse

S1
Thanks fabiolaec, mine is only the S1 (not S3) so I'm not sure it would work
fabiolaec said:
Hi, I used one available in droid lessons, but i'm not allowed to post links yet. Just look in google for droid lessons and then " How to Root the Samsung Galaxy S3 " It was really easy, and worked great for me.
Click to expand...
Click to collapse

downgrade
Sewrizer said:
Looks like that tutorial was only good for stock froyo users. Since you have gingerbread you must have updated your phone. I think you may have to downgrade from 2.3 to 2.2.
Click to expand...
Click to collapse
yes you're right I did upgrade at the Samsung store. I'll follow up your link now, but it's starting to sound awfully complicated :silly:
Thanks Sewrizer :silly::highfive:

I9505xxuppi1

Content removed.

Custom firmware based. I9505XXUPPI1
Replaced CSC on Russian SER BE from the last Russian J2. YOTA works out of the box immediately and Russian language sounds too + wallpaper and poveramp.
Animation on off from the S7,
S6 from the weather with a full date, the gallery. W Black Market Google YouTube.
The core of the native, so desktop vayf need to flash the bootloader modem from 4 file, the post above from the SW. Aleks.74 or just off. I9505XXUHPG1 firmware or put any custom kernel (my version imperium).
Changes: cleaned up a bit, added 50 hidden permissions type shutter sound, and work just LTE.
Setting common.
download google

Hello on all!
I wait on the Flash Instruction for the newest Samsung Stock-Kernel.
I have flashed the interim-Kernel Imperium-Kernel
The Rom runs perfectly

This ROM contains, like the older XXUPOL1-Version, again all IMS-Files for VoLTE!
Just the csc-files needs to be fixed for DTM, VD2, VIA and others.
For working configurations, the csc files from SM-G900F (latest 5.0 Android) can be used as base for this rom.
VoLTE is ONLY available for some providers. The function is disabled for ATO or DBT and much more generic CSCs.
The enable/disable-function is in the dialer-config-menu by the way.

If you're going to post a thread, include a few details maybe?
And the website link you posted is not welcome on xda. Please don't post links to that site here.
Thread closed.

Firmware for MT6572 Note30 Plus

Hello, I'm new to this Forum and I like to request some firmware to unbrick my Chinese MT6572 Note30 Plus smartphone.
Below this message some specifications of the ROM I need:
Brand model: Maimeite Note30 Plus
Chipset: MT6572
PreLoader: x6_v5_x50
Android OS: KitKat 4.4.2
Buildnumber: HY_W116_P907A-FW-Note30_Plus
RAM: 466Mb
Storage: 1,3Gb
Hopefully you wil soon help me with the firmware request.
Like to hear from you & here some thanx for helping me out...

Request the Stock ROM from OEM.

jwoegerbauer said:
Request the Stock ROM from OEM.
Click to expand...
Click to collapse
Thanks for the tip. Allready had contact with them but sadly the communication was lack and they
couln't help me. On the internet I got a "bad" firmwarefile, so I flashed it and now my screen stays white,
can hear the startup sound, but the screen maintains white...
Do you know a software package so I can view the screen of my Chinese Clone?

TrippyBlade said:
Hello, I'm new to this Forum and I like to request some firmware to unbrick my Chinese MT6572 Note30 Plus smartphone.
Below this message some specifications of the ROM I need:
Brand model: Maimeite Note30 Plus
Chipset: MT6572
PreLoader: x6_v5_x50
Android OS: KitKat 4.4.2
Buildnumber: HY_W116_P907A-FW-Note30_Plus
RAM: 466Mb
Storage: 1,3Gb
Hopefully you wil soon help me with the firmware request.
Like to hear from you & here some thanx for helping me out...
Click to expand...
Click to collapse
Did you find the firmware?

Ursuru said:
Did you find the firmware?
Click to expand...
Click to collapse
At last I did have found the right firmware package, but sadly the phone was allready ruined by a
bad software update package with SP Flash Tool. Now during the boot up the screen stays white while
you can hear the startup sound of the smartphone... Help me out please?
I try to install a recovery app like TWRP and hopefully that will help out

TrippyBlade said:
At last I did have found the right firmware package, but sadly the phone was allready ruined by a
bad software update package with SP Flash Tool. Now during the boot up the screen stays white while
you can hear the startup sound of the smartphone... Help me out please?
I try to install a recovery app like TWRP and hopefully that will help out
Click to expand...
Click to collapse
hello&greetings from las vegas..i did the same thing..w sp flash..i am not able to get the firmware for this phone...you said you found it???i was wondering if you could wrap it in a zip for me or something to that effect???please>>ty.even a url link would be better then what i have.thanks again

Servirebbe anche ame il firmware del note 30 plus

TrippyBlade said:
Thanks for the tip. Allready had contact with them but sadly the communication was lack and they
couln't help me. On the internet I got a "bad" firmwarefile, so I flashed it and now my screen stays white,
can hear the startup sound, but the screen maintains white...
Do you know a software package so I can view the screen of my Chinese Clone?
Click to expand...
Click to collapse
hello&greetings from las vegas...this is big problem,this note 30 plus..ive searched the entire net it seems,and have found 3 software packages for this phone..thats it...1has a password,so impossible to extract,one from some indonesian guy,and another,which is for alps..i have the exact problem as you do, my screen is now white after flashing,now,ive done some extensive work on this with hovatek,they seem to think that if you can hear start up sound ,thatit is def.incompatible aboot.img,amongst others,view my posts there.there is usefull info...i was wondering if you ever solved this or had gotten the right firmware??maybe we can help each other out here,this clone is trouble,but i think w the right firmware and a good version of android,this would be a kick ass clone.,..the problem is,for sure,the damn software these chinese dudes put on it in the first place...

wesside298 said:
hello&greetings from las vegas..i did the same thing..w sp flash..i am not able to get the firmware for this phone...you said you found it???i was wondering if you could wrap it in a zip for me or something to that effect???please>>ty.even a url link would be better then what i have.thanks again
Click to expand...
Click to collapse
I have send you a private message with an attachment of the firmware package. Please reply me if it was usefull or not

TrippyBlade said:
I have send you a private message with an attachment of the firmware package. Please reply me if it was usefull or not
Click to expand...
Click to collapse
i try to put a different images on mt6572 4.4.2 note80. it is corrupt. nand error ufi error. i like to see to try your file. can please provide.
thank you
Hardware : MT6572
Model : Note80
Build number : ALPS.KK1.MP7.V1.7
Build date UTC : 20210903-060958
Android v : 4.4.2
Baseband v: -----
Kernel v : 3.4.67 ([email protected]) (gcc version 4.7 (GCC) ) #1 SMP Fri Sep 3 14:08:00 CST 2021

TrippyBlade said:
I have send you a private message with an attachment of the firmware package. Please reply me if it was usefull or not
Click to expand...
Click to collapse
hello bud...hey..i was wondering..this white screen you speaking of....it is white and yellow pixels..and this popped up after you flashing it,correct?if you do have sound then prob this is acase of incompatable firmware...did you ever fix this issue???mine...is same screen,also i too,have sound,but i am not able to get sp to read this,im sure i have to short the test points,but....help

wesside298 said:
hello bud...hey..i was wondering..this white screen you speaking of....it is white and yellow pixels..and this popped up after you flashing it,correct?if you do have sound then prob this is acase of incompatable firmware...did you ever fix this issue???mine...is same screen,also i too,have sound,but i am not able to get sp to read this,im sure i have to short the test points,but....help
Click to expand...
Click to collapse
Goodevening,
Yep, I got the same result as you were speakimg of. But the phone details were fake also...
Now you have to search again for the proper firmware I guess. I shall delete the file though.
You can still evive your phone, just take patience and search for the right package

TrippyBlade said:
Hello, I'm new to this Forum and I like to request some firmware to unbrick my Chinese MT6572 Note30 Plus smartphone.
Below this message some specifications of the ROM I need:
Brand model: Maimeite Note30 Plus
Chipset: MT6572
PreLoader: x6_v5_x50
Android OS: KitKat 4.4.2
Buildnumber: HY_W116_P907A-FW-Note30_Plus
RAM: 466Mb
Storage: 1,3Gb
Hopefully you wil soon help me with the firmware request.
Like to hear from you & here some thanx for helping me out...
Click to expand...
Click to collapse
does anyone have the note 30 plus firmware?

[email protected] said:
does anyone have the note 30 plus firmware?
Click to expand...
Click to collapse
yes,i have it..this is mtk chip,soc...you flashing w spft,n.p..i am currently working on a comprehensive list of which programmer file goes with which phone also..i figured id just throw that out there..lol..quallcomm giving me some headaches lately..anyways i will upload this firmware for you

here is firmware for note 30

wesside298 said:
here is firmware for note 30
Click to expand...
Click to collapse
should I deodex it from the google stuff?

mailipoovu said:
i try to put a different images on mt6572 4.4.2 note80. it is corrupt. nand error ufi error. i like to see to try your file. can please provide.
thank you
Hardware : MT6572
Model : Note80
Build number : ALPS.KK1.MP7.V1.7
Build date UTC : 20210903-060958
Android v : 4.4.2
Baseband v: -----
Kernel v : 3.4.67 ([email protected]) (gcc version 4.7 (GCC) ) #1 SMP Fri Sep 3 14:08:00 CST 2021
Click to expand...
Click to collapse
By2_9009_Smart_(ALPS.KK1.MP7.V1.7)_by_(FirmwareOS.com).zip | by Shohag Malik for Generic Device/Other
Download GApps, Roms, Kernels, Themes, Firmware, and more. Free file hosting for all Android developers.
androidfilehost.com
here's your proper firmware

guess i'll make my own firmware for this note 30 plus

notnoelchannel said:
By2_9009_Smart_(ALPS.KK1.MP7.V1.7)_by_(FirmwareOS.com).zip | by Shohag Malik for Generic Device/Other
Download GApps, Roms, Kernels, Themes, Firmware, and more. Free file hosting for all Android developers.
androidfilehost.com
here's your proper firmware
Click to expand...
Click to collapse
used the file and i get the message
error: s_ft_enable_dram_fail (4032)
[emi] enable dram failed!
[hint]lease check your load matches to your target which is to be downloaded
mediatek splash tool v5.2016.00
in the download 'list' i choose 'format-all and download' in the format tab , i select 'validation' and auto
I did a recovery before this mess. That one did not contain 'preloader' and 'userdata' image files. I copied the files from 'MT6572_ZTE_Kis_II_Max_P172R10_4.4.2_DIS_EUR_QB18D_P172R10V1.0.0_clean' this one. I get the first menu 'recovery, fastboot, normal'. If i select anyone, nothing happens. The panel light on. Phone charge works. After charge complete, the back flash light on. From PC fastboot detect the device. When I did the fastboot to flash recovery image. 'no partition error'.
thank you for your comments.

mailipoovu said:
i try to put a different images on mt6572 4.4.2 note80. it is corrupt. nand error ufi error. i like to see to try your file. can please provide.
thank you
Hardware : MT6572
Model : Note80
Build number : ALPS.KK1.MP7.V1.7
Build date UTC : 20210903-060958
Android v : 4.4.2
Baseband v: -----
Kernel v : 3.4.67 ([email protected]) (gcc version 4.7 (GCC) ) #1 SMP Fri Sep 3 14:08:00 CST 2021
Click to expand...
Click to collapse
The additional information
4.4.2, Android 1630651846
NOTE80, Build/KOT49H
Can some one give the custom-rom complete files to unbrick.
The brand says 'hello'
thank you