Related
Im waiting for the PdAir leather flip case to come up, but meanwhile I spotted this for £20. Works for both Desire and N1. What you guys think?
http://www.clove.co.uk/viewProduct....rce=google&utm_medium=base&utm_campaign=pound
That looks a good price £20+vat = £23.50
Proporta are charging £30!
-Joe
Yes. Not bad at all... not sure if the PdAir one is better... below a sample of one on Ebay:
http://cgi.ebay.co.uk/PDair-Genuine..._PDAsAccessories_PDACases?hash=item335c381f19
I had PDair before - and I do like their quality. The Alu leather one seems to keep the whole screen free from obstruction, which I like...
The problem with the PDair, like the one for the HD2, is that the leather along the sides of the screen actually make it more difficult to use the touch screen at the edge of the screen. I prefer the Clove case mentioned above and a similar design from Noreve.
jah said:
The problem with the PDair, like the one for the HD2, is that the leather along the sides of the screen actually make it more difficult to use the touch screen at the edge of the screen. I prefer the Clove case mentioned above and a similar design from Noreve.
Click to expand...
Click to collapse
I agree with that. I had a PDAir case on a previous phone and found it did restrict access to the edge of the screen and also to the buttons at the bottom.
On the other hand, I am worried that the Desire Alu Leather flip case does not protect the edges of the phone from other things in the pocket and, even, whether small coins can slip under the cover onto the screen.
I may have to stick with a simple pouch. (But I also like the look of PDAir's Luxury Silicone Case like they make for the Nexus One.)
Good point.. the sides are open, but I think it should cover if it falls on the floor etc. I think I will go for the Prpoporta alu case, but get a screenprotector film as well.
Just orderered the Alu-Leather case from Clove. Will let you know when get it and how it feels.
Got the Alu Leather flip case today. Looks great!!! Finally I dont have to worry too much about scratching or damaging the phone. It looks stylish with black and inside white leather. It gives access to the headphone jacks and is easy to open quickly to answer calls etc.
Seems keeping the phone sturdy in place and nothing blocking the screen (unlike PdAir).
Will let you know how it feels after couple more days use!!
But looks really stylish!
Is the stud used to close the cover stands over the screen? I like flip cases, but on most of them the studs is just over the screen, and I'm worried about been able to broke it.
jannen said:
Got the Alu Leather flip case today. Looks great!!! Finally I dont have to worry too much about scratching or damaging the phone. It looks stylish with black and inside white leather. It gives access to the headphone jacks and is easy to open quickly to answer calls etc.
Seems keeping the phone sturdy in place and nothing blocking the screen (unlike PdAir).
Will let you know how it feels after couple more days use!!
But looks really stylish!
Click to expand...
Click to collapse
The stud.. or magnetic button... stands almost exactly over the optical trackball. But I wouldnt worry at all as the cover is lined with aluminium sheet. Means its well protected from impacts to the front and back of the phone.
How much depth would you say it adds to the phone?
Are you able to upload any pics? Would be awesome if you could, particularly one with the stud closed
Here are few pics... please dont pay attention to all the dust that the flash picked!
It does add little depth to the phone - as does PdAir etc. At least it has a aluminum layer strengthening it, but with the leather its smooth. I got this phone on a 24mth
contract so I want to protect my baby well at least for the first year or so...
Jannen, what is it like taking portrait photos now with the flap at the top? Does it get in the way at all?
Just took some pics... just hold the flip with your left hand. To me, no big deal really... and as it was sunny the flip actually blocked the sun reflecting from the screen. But honestly, I think that is personal taste. I prefer flip cases to others as they give some protection if you drop the phone while using it. Slip in ones dont protect if you drop it while using it.
Anyone used this case? I REALLY don't want to put a case on my Nexus One, but it's also so slim and thin that I am going to drop it eventually.
Silly as it is, I don't want the whole phone covered up, so while the Innocase Surface II looks decent it also covers up the phone.. The Boxwave Pure Crystal Slip doesn't, but I can't find any reviews on it.
Anyone used one of these things? I don't use the dock, although I do use a horizontal belt case so I might have to get one that's slightly bigger as the N1 barely fits in the existing one, but I can deal with that.. That would happen for any case honestly, except for a skin.. I do like Best Skin Ever, but the last two I've bought seem to not be quite as "tacky" as the first few I had, therefore the grip wasn't quite as good. Maybe my imagination..
I bought the Boxwave case off amazon a month ago probably. its a nice case but save your money and buy a resin case from dcmugen on ebay, exact same thing with a different logo. its a nice case though, not too thick and easy to take on and off (I use both docks) so it fits my needs quite well.
Boxwave here. Nice thin and classy. Has rubber feel but not too soft either. It's a pretty good case makes phone look ten times better in my opinion. Is easily recommend it, but I don't use docks, so can't help there. Never the less, happy casing.
DC Mugen FTW. eBay - Epik Case. I got two cases for $8 including shipping and two screen protectors.
check out the cyclone crystal clip from boxwave - it looks even better (sry cant post link)
stiCk.E said:
check out the cyclone crystal clip from boxwave - it looks even better (sry cant post link)
Click to expand...
Click to collapse
Ah, I see.. I still think I prefer the Pure, no patterns on it, but otherwise the same.. Looks like Boxwave has the Cyclone (circle patterns), diamonds, a matte finish, some others..
Still haven't decided on which case.... I've always been disappointed in silicone cases, but I've almost always bought cheap $2 eBay ones..
I went with the Boxwave Pure Crystal Slip, we'll see when it arrives! God knows when, I had two shipping options.. 5-10 days ($2) or 1-3 days ($23!!)
So I'll see in 5-10 days
I got the Clear Pure Crystal Slip yesterday. Here's a quick review:
Overall, I like it and will likely use it when I'm out and about. It gives a much more secure grip on the phone without adding any weight or feeling larger. Although honestly I still think the Nexus One is a little TOO thin and a little slippery. This makes that better.
It feels like a cheap case, it's rubbery and smooth. If your hands are wet or oily it might be MORE slippery, don't know yet. In reality it seems pretty well made, and fits well. The Clear Pure version is crystal clear, no tint, no patterns, and you can clearly see the phone is a Nexus One.
I'm not doing any drop testing, but I think if the phone landed on a corner or an end this case could protect it. It's firm but pliable, not squishy like a silicone case and not a hard case. Primarily I think it'll protect it because it'll be LESS LIKELY to get dropped because the surface is a tackier and more surface area on the sides. I can pick up the phone with two fingers securely now, where before I'd have to tilt the phone up and get fingers under it to pick it up.
If anyone wants pictures I can do that, haven't yet...
Price summary: If it were $15 it'd be a deal. $20 seems too much.
Pros:
You can see see it's a Nexus. Google branding, colors, body build
It's thin, firm, and fits tightly
Covers up the power and volume buttons, but made to fit over them. Maybe a little rain resistance?
Adds better grip, more confidence holding the phone
Does not interfere with any ports (except a little on the power plug, see below)
Does not interfere with any openings (speaker, mics, camera, camera flash)
Does not interfere with the screen, particularly near the edges
Does not obscure the speaker when phone is on its back
Lets you lay the phone down face-down without resting on the trackball
Covers all corners, edges, entire back.
Cons:
It has a molding line all around it.. It's not that visible but you can feel it. Sides aren't smooth
Covers up the power and volume buttons, but made to fit over them. Makes it too easy to hit the buttons, and you can't feel the button very well (to feel it when touching) nor feel the action of the button itself.
Seems to make the stock charger plug (maybe others too) not feel "in", I think there's too much material around the plug
Takes away the nice texture and feel of the Nexus One
Thumb hits the case a little scrolling down on the trackball, but it doesn't make it harder to use
Other notes:
Does not protect the camera lens or the screen at all
Mine was clearly used, fingerprints all over and in the box backwards :/
A slim belt case intended for the N1 is too small to fit with this case
There is a weird cutout to the left of the HTC logo in the case, like maybe a hand strap could go there?
akifbayram said:
That case does look nice but 20 dollars seems a bit excessive. Look at other Amazon items. I found one for 5 dollars shipped that is pretty similar and doesn't have the hole in the back. http://www.amazon.com/Google-Crysta...X1DSC0SAJ94E&s=generic&qid=1275242975&sr=1-27
Click to expand...
Click to collapse
I have that case as well as the Crystal Boxwave slip.
The Boxwave one:
- Is clearer obviously (not the "smoked look").
- Fits a good deal tighter.
- Has a full cover for the lip, not the chin strap method of attaching.
- Has Boxwave written across the back.
I actually prefer the patterned one because it's more interesting, both detract from the Nexus, so it might as well add some flavor, right? The Boxwave one is far tighter fitting (and slightly thinner) but neither is going to come off in any kind of normal use. I also own the desktop dock, so I need to take it off on occasion to allow the phone to fit. Both cover all the buttons, so you have to get used to pressing them through the rubber. They also both have that edge around the edge of the case from being molded.
Anywho, just my $0.02
akifbayram said:
Speaking of 2 cents...there are a lot of auctions for the patterned Nexus One cases for 99 cents. http://stores.ebay.com/Cimo-Cases_G...15QQ_sidZ192097565QQ_trksidZp4634Q2ec0Q2em322 I wish I knew about this before
Click to expand...
Click to collapse
And those are probably worth at least $1.10...... Sometimes you really have to make a minimal investment to get something useful.
what is the best epic 4g case? post yours...
I bought the Black Samsung one from the Sprint store for $19.99. It works great and does what I want.
Yeah, I know. I'm boring
TheCraigJ said:
I bought the Black Samsung one from the Sprint store for $19.99. It works great and does what I want.
Yeah, I know. I'm boring
Click to expand...
Click to collapse
haha the sprint cases are fin & your not boring..
I'm using the Seidio Innocase Surface case/holster combo. Nice tactile feel on the case, and the secure spring-clip holster does really well, especially with my clumsy arse...
Sent from my SPH-D700 using XDA App
Definition of the "best" case would be different for every person because it depends on personal preferences, how you use your phone, and how you carry it. Personally, I like the feeling of a naked phone and with my Touch Pro 2 I mostly used Forte leather case (although I tried Seidio Surface for a short period). The advantage of a leather pouch is that you don't have any permanent thickness added to your phone, but disadvantages are that you need to take the phone out of the case to see the screen and you can still drop the phone while out of the case - which is exactly what happened to me a few times. Now when I got Epic, it is thinner then TP2 so I wanted to get a snap-on case for it. Here is my mini-review of a few cases I tried:
1) Seidio Active - it is the case that (among other snap on cases) would definitely provide the best protection if the phone is dropped, it looks good, and made well. The soft gel provides a nice cushion and the plastic skeleton strategically positions hard coverage over areas that could be most impacted during the fall. It seems that the recently found Fishbone case on Amazon is very similar in the design so I would expect it to provide the same protection. Unfortunately, Seidio Active was a bit too thick to my liking and since I usualy take good care of my phones, I didn't feel that the extra protection would justify the added thickness for my needs.
2) Seidio Surface - this is probably the thinnest snap on case you can get. I really like the fact that it adds very little to the overall size of the phone and I thought that it would be the perfect case for me when I bought it and put it on. However, maybe the fact that it is so thin contributed to the fact that it feels a bit flimsy when on the phone. There is a tiny bit of play on both the top and bottom parts (when you squeeze them with your fingers on the sides) and sometimes when you push power button the phone tends to slide open a bit based on how I hold it in my hand. The case seems to fit like a glove but it is not as tight as I would like it to be and it is VERY easy to remove the top part with almost no effort whatsoever. Some may consider it a plus, but I consider it a minus because I am pretty sure that if the phone is dropped, the top part will most likely fall off after the first bump leaving the top unprotected (this actually did happen when I used Seidio Surface case on my Touch Pro 2 and dropped from about 3 feet onto hardwood floor).
3) Sprint Case with rubber back - to me this turned out to be the "best" case, at least for now. In terms of added thickness it is somewhere in between Seidio Active and Surface cases. It fits very snug and tight. I like the rubber backing a lot, it is not slippery, feels very nice in hand, and looks good (at least in black). Some people mentioned that the rubber has a tendency to peel off - I've had this case for a month now and it looks like new and I have no peeling issues; but even if I do, I am sure that a carefully placed drop of crazy glue will take care of this issue permanently. I have removed the case several times and I don't see any scratches left on the phone as was posted in one thread. The only drawback may be that the case is a bit harder to remove then Seidio, but to me it is not an issue and means that it will stay on during the fall. I rarely remove the top part, but I am a heavy phone user so I swap extra battery often and don't have any issues removing the bottom part after getting used to it. There were some reports of snaps breaking off - I have not experience that at all and I hope I won't since this is a perfect case for me at this point.
In terms of price - all three cases are around $20 bucks so price is not a factor. All three cases do not interfere with the sliding mechanism and make the phone feel a bit tighter with less screen play and no more squeaking from the battery door. I also tried one of those invisible shield things which is basically a screen protector over the entire phone. Two issues I found with those: a) no matter what brand you get, they will eventually start peeling and will attract dirt on the edges looking like crap after a while; b) although they provide scratch protection, they won't do much if the phone is dropped.
Hope you'll find your best case.
Cheers.
My sprint case has all the tab breaking off after about a month and a half of use. YMMV.
Geekybiker said:
My sprint case has all the tab breaking off after about a month and a half of use. YMMV.
Click to expand...
Click to collapse
I wonder if this has to do with how different people remove/put it on. I usualy pick the two corner clips on the charger side with my nail and it removes pretty easily after that (just slide it off). When I put it back I do it in reverse order - I slide the bottom two clips on first and then snap the top ones on. So far it's been working well for me.
I'm using a black Seidio Innocase (regular not active) with the spring clip holster and I love it. I originally had the body glove case and it was just too big.. felt like I was carrying a brick in my pocket. The Innocase doesn't add much bulk and gives a bit of protection from random bumps and scratches. Has a pleasant lip around the screen too so laying the epic flat on its face keeps the screen from contacting a surface.
Sent from my SPH-D700 using XDA App
My experience with case durability is completely different from gorby911's, so it's all YMMV. My Sprint case completely fell apart in 1.5 months of use, what with the clips breaking off, and 2 corners of the rubber backing peeling away. Even after Gorilla-gluing one of the corners, it peeled off again within a week! Just got a Seidio Surface and it fits very snugly and no play.
The downside of the Surface is that its rubberized texture is actually quite slippery, vs. the grippy texture on the Sprint case (especially with its rubber backing). It slightly twists and slips around in my hand that supports it while I'm swiping around with my other hand. But it's got a much thinner profile with what I feel appears to be the same amount of protection.
I hope it lasts more than 1.5 months long.
So the sedio active is the slimmest case? May have to check that out, thanks for the info.
ranchosteve said:
So the sedio active is the slimmest case? May have to check that out, thanks for the info.
Click to expand...
Click to collapse
Seidio innocase should be the thinnest.
I've been using the BodyGlove that has a the smoked chrome. Stylish and strong. Dropped it a few times and everything's still fine. Sprint Direct/Indirect stores have them available.
gorby911 said:
I wonder if this has to do with how different people remove/put it on. I usualy pick the two corner clips on the charger side with my nail and it removes pretty easily after that (just slide it off). When I put it back I do it in reverse order - I slide the bottom two clips on first and then snap the top ones on. So far it's been working well for me.
Click to expand...
Click to collapse
I have both the Innocase Surface and the black Sprint case and I too have had no problems with my Sprint case - I take off the back of the case exactly as you have described. Not a single scratch on my phone yet (knock on wood). I prefer the Sprint case over the Innocase as it seems to offer better protection.
For those who are curious, the black Sprint case fits in the Seidio Innocase Holster (the one designed for the Innocase Surface at least). I bought the $40 Innocase/holster combo at Best Buy, but am using the holster with my Sprint case.
I'm using this one. Got it off fleabay for $8.99. Really nice OEM leather case that fits great. I can't stand a phone in my pocket so I have mine on my belt.
I've been using the CM Tough for a while now. While it's a great case for protection (very reassuring), its very bulky, and the silicone inner traps all sorts of dust and hair from the inside of my pockets.
For the past month or so, I've been walking around with my phone in my hand, fearing the attack of the lint, and wiping the lint and dust off the silicone whenever I could.
I've decided that if my friends can have sexy, slim cases for the iPhone, allowing it to come easily in and out of the pocket, there's no reason I shouldn't do the same.
Protection, for me, isn't that much of a problem. The easiest way to protect your phone is to basically not drop it, and in the half year I've had my phone, I've never dropped it once.
SO, I've been looking at...
The Momax iCase Pro: TPU sides and plastic back, slim.
SGP Slider: Hard case with cutouts for the volume/power. Looks rather slim.
Not a big fan of cases that don't cover the bezel. I honestly don't get the point, no scratch protection for bezel, and I can't put my phone face-down.
Are there any more cases I should be aware of? Are there people who can give a mini-review for the cases I mentioned above?
Thanks!
Have a look at this, just picked one up yesterday
http://www.case-mate.com/Samsung-Ga...axy-S-T-Mobile-Vibrant-Barely-There-Cases.asp
Fits perfectly on my European GT I9000, feels much nicer than bare phone or hard silicon case I previously used, and it's as easy to get out of your pocket as the bare phone. The only issue you might have is with the bezel, as it doesn't really cover it, rather it leaves the psuedo chrome visible, and only adds at most 0.5mm clearance if you place the phone face down.
Personally, I'm very happy with it. The phone is grippier, the volume and power buttons are much easier to use, and it looks good.
Headphone jack access is better too.
Read the reviews on the link.
Here's another I had a look at recently, seems to give great protection, but it's fiddly to get on and off if you need to do a battery pull, and I didn't like the squidgy button covers, but it might be more in the line of what you're after.
http://www.otterbox.com/Samsung-Galaxy-S-Commuter-Series-Case/SAM4-GALXS-20-E4OTR_A,default,pd.html
I also use the Case Mate Barely There and it is the best I have tried so far.
It doesn't collect dust and the phone slides into the pockets.
I prefer the Momax. My workmate has the barely there, which is slightly slimmer but at the expense of losing some protection. The momax is the best option if you want slim but can still feel comfortable that your phone is safe imo.
I also had the toughcase and became frustrated with it for the same reasons as you. I'm very happy with the momax. Only issue is the power button is a bit harder to push now but a small price to pay.
Sent from my GT-I9000 using XDA App
Using the SGP Ultra slider, totally in love with it as i prefer to have direct access to hardware buttons
I have the Momax case and I have to say, it's pretty good.
http://forum.xda-developers.com/showthread.php?t=790318 - PhoenixFX has provided a review here.
Things i like:
It has a hybrid design, the back is not fully rigid but feels solid, soft sides.
Sides are flexible enough so that it goes on easy but stays in, also like how TPU doesn't become stretchy like silicone .
Lip that protects the screen, didn't notice too much dust getting in.
It's easy to keep a good grip on it.
Dislikes:
As the one posters above me said, the power button is harder to press. the same kind of applies for the volume keys but nor as much. It might be annoying in the long run.
Other than that the case is perfectly fine although I don't really know if it can be classified as slim by my standards , the back plate part is around 1.5mm thick. The back is a matte finish that doesn't offer too much grip but the sides are very grippy.
Hope this helps (I haven't tried any of the other cases so I can't really compare).
i think, case mate barely there is really good for slim profile somehow. and also capdase soft jacket xpose 2 also looks okay.
Check out carrymobiles, melko cases as well
I use the same Case-Mate Barely There case as DMD9, and I don't see myself changing it anytime soon. Very sleek, provides a little bit of a rubbery feel but not enough to make it difficult to slide out of pockets
After protecting my SGS like a baby for the last 11 or so months, it has suffered some damage here and there (home button doesn't work very well, scratches etc).
Thus I decided to ditch the case and go totally slimline with a replacement battery cover (the stock one is a fingerprint magnet, and I have kinda sweaty hands!). Ordered a silver one from focal price (the ones with the samsung logo, but clearly fake) and its a pretty good fit.
I totally recommend going caseless, it fits so well in the pocket when you go out!
I also support caseless usage,
I had a invisibleshield protector on the phone for a few months and that one worked well but it came off.
Now i still use the phone as if there was a protector on it and....not a scratch added.
the screen can really handle some abuse
RhinoShield so far is the only option I've found for a BUMPER-ONLY case solution for our Note 9. I've bought this case twice after giving it a second chance and sent it back for the second time. The bumper frame itself is fine. It's got a fair amount of front lip to allow me to lay the phone face down to show off my Dbrand skin. Strangely enough, the lip on the back of the bumper frame is taller than the front.
Anyway, the biggest issue with this bumper-only case is the buttons. Oh my god, they have the worst buttons I've ever tried. I've mentioned in other threads that Spigen is the king when it comes to the buttons they build into their cases. They are raised a healthy amount so they're easily found and they have the best feedback ever. Very "clicky".
This RhinoShield bumper case buttons are so hard to register a click. They're too firm. The plastic is not soft at all. The second time I bought this case I tried pressing the buttons without the phone to try and soften them (like hundreds of pressings) and that did nothing to make them more malleable. I bought this case for the OnePlus 6T and the buttons on that case were just as ****ty as the one for the Note 9.
The other issue was the area around the S-Pen is too small, making retrieving of the pen more difficult compared to the dozens of cases I've tried before. I'm an average sized dude. My hands aren't huge but they're not small either. If I had longer nails maybe getting the S-Pen out would be easier but I don't.
Clear cases are not an option for me. They'll always reflect glare and distort the look of my drband skin. I just need a bumper-only solution. Just something to protect the edges of this phone. I cannot believe this type of case is not more popular. Like, why Spigen and others do not offer this as an option. Hell, if they could just make some kind of rubber band-like thing that I can wrap around the edges, that would be fair.
If anyone finds any BUMPER-ONLY cases, please share them with me. Thank you.
I've got one and I agree that the volume buttons are too stiff. I had to play / force them in and out with my plastic card holder edge to soften them a bit.
The lateral part are not that "firm" around the phone so unfortunately it feels a bit flabby.
It still makes the phone bulky, but according to one YouTube video where the guy toss the phone very high a few times without the phone being damaged at all, the protection is REALLY good.
roaduardo said:
RhinoShield so far is the only option I've found for a BUMPER-ONLY case solution for our Note 9. I've bought this case twice after giving it a second chance and sent it back for the second time. The bumper frame itself is fine. It's got a fair amount of front lip to allow me to lay the phone face down to show off my Dbrand skin. Strangely enough, the lip on the back of the bumper frame is taller than the front.
Anyway, the biggest issue with this bumper-only case is the buttons. Oh my god, they have the worst buttons I've ever tried. I've mentioned in other threads that Spigen is the king when it comes to the buttons they build into their cases. They are raised a healthy amount so they're easily found and they have the best feedback ever. Very "clicky".
This RhinoShield bumper case buttons are so hard to register a click. They're too firm. The plastic is not soft at all. The second time I bought this case I tried pressing the buttons without the phone to try and soften them (like hundreds of pressings) and that did nothing to make them more malleable. I bought this case for the OnePlus 6T and the buttons on that case were just as ****ty as the one for the Note 9.
The other issue was the area around the S-Pen is too small, making retrieving of the pen more difficult compared to the dozens of cases I've tried before. I'm an average sized dude. My hands aren't huge but they're not small either. If I had longer nails maybe getting the S-Pen out would be easier but I don't.
Clear cases are not an option for me. They'll always reflect glare and distort the look of my drband skin. I just need a bumper-only solution. Just something to protect the edges of this phone. I cannot believe this type of case is not more popular. Like, why Spigen and others do not offer this as an option. Hell, if they could just make some kind of rubber band-like thing that I can wrap around the edges, that would be fair.
If anyone finds any BUMPER-ONLY cases, please share them with me. Thank you.
Click to expand...
Click to collapse
I meant to do a review of the rhinoshield to warn everyone how awful they are. I had the exact same esperience as you and to add insult to injury, when I contacted the company to voice my concern they wanted me to ship it back with me paying for the shipping and would only accept it if it was BRAND NEW WITH NO SIGN OF WEAR. Really? Very bad customer service and crappy product..
Sent from my SM-N960U1 using Tapatalk
eurominican said:
I meant to do a review of the rhinoshield to warn everyone how awful they are. I had the exact same esperience as you and to add insult to injury, when I contacted the company to voice my concern they wanted me to ship it back with me paying for the shipping and would only accept it if it was BRAND NEW WITH NO SIGN OF WEAR. Really? Very bad customer service and crappy product..
Sent from my SM-N960U1 using Tapatalk
Click to expand...
Click to collapse
That why I bought that case from Amazon. Can't beat Prime.
I had Rhino bumper on SGS7, totally agree with you. Hard buttons and slipery material. My buttons chopped off after almost a year of wear and tear.
My gf is using Ringke Fusion (clear back case) + dbrand skin. It looks beautiful so I ordered same case for Note9 + dbrand skin. It looks much better with lighter skins. Darker skins looks great when there is enough light around you. In low light it acts almost like a mirror.
https://imgur.com/QTYcakg
No way I go back to Rhyno again. It's not bumper case but I don't mind to flip it over and show camo skin
roaduardo said:
RhinoShield so far is the only option I've found for a BUMPER-ONLY case solution for our Note 9. I've bought this case twice after giving it a second chance and sent it back for the second time. The bumper frame itself is fine. It's got a fair amount of front lip to allow me to lay the phone face down to show off my Dbrand skin. Strangely enough, the lip on the back of the bumper frame is taller than the front.
Anyway, the biggest issue with this bumper-only case is the buttons. Oh my god, they have the worst buttons I've ever tried. I've mentioned in other threads that Spigen is the king when it comes to the buttons they build into their cases. They are raised a healthy amount so they're easily found and they have the best feedback ever. Very "clicky".
This RhinoShield bumper case buttons are so hard to register a click. They're too firm. The plastic is not soft at all. The second time I bought this case I tried pressing the buttons without the phone to try and soften them (like hundreds of pressings) and that did nothing to make them more malleable. I bought this case for the OnePlus 6T and the buttons on that case were just as ****ty as the one for the Note 9.
The other issue was the area around the S-Pen is too small, making retrieving of the pen more difficult compared to the dozens of cases I've tried before. I'm an average sized dude. My hands aren't huge but they're not small either. If I had longer nails maybe getting the S-Pen out would be easier but I don't.
Clear cases are not an option for me. They'll always reflect glare and distort the look of my drband skin. I just need a bumper-only solution. Just something to protect the edges of this phone. I cannot believe this type of case is not more popular. Like, why Spigen and others do not offer this as an option. Hell, if they could just make some kind of rubber band-like thing that I can wrap around the edges, that would be fair.
If anyone finds any BUMPER-ONLY cases, please share them with me. Thank you.
Click to expand...
Click to collapse
The only way you can fix the button issue, is get an Stanley blade and cut the sides of the button.. So the top and the bottom of the button is the only place where the plastic is connected.. Then they will be so easy to press!
I did that on my case on day 2, it helps but I wouldn't say it is enough. At the end, when my Rhyno bumper buttons wear I even tried to cut them out and flatten the area around button. I've got choped case with holes where buttons are placed and it was bad experience. Hard plastic, rough edges, not easy to dig and not pleasant to fingers. Too bad, unfortunately, I've used cases on same phone (sgs7 like I said) with much more tactile buttons so I gave up on Rhyno.
N1NJATH3ORY said:
The only way you can fix the button issue, is get an Stanley blade and cut the sides of the button.. So the top and the bottom of the button is the only place where the plastic is connected.. Then they will be so easy to press!
Click to expand...
Click to collapse
I'm tempted to buy this case for the 3rd time and try this method but I don't know. The buttons are not raised enough to begin with. If they were as tall as buttons you'd find on Spigen cases, then for sure I'd try this razor method to try and fix the faulty design but I don't know.
I just cannot understand why RhinoShield is the only one making cases like this. Why is this type of case not more popular? Why would more users not want a bumper-only design. Why doesn't Dbrand and other skin makers not make a bumper-only case that helps show of their awesome skins better?
roaduardo said:
I'm tempted to buy this case for the 3rd time and try this method but I don't know. The buttons are not raised enough to begin with. If they were as tall as buttons you'd find on Spigen cases, then for sure I'd try this razor method to try and fix the faulty design but I don't know.
I just cannot understand why RhinoShield is the only one making cases like this. Why is this type of case not more popular? Why would more users not want a bumper-only design. Why doesn't Dbrand and other skin makers not make a bumper-only case that helps show of their awesome skins better?
Click to expand...
Click to collapse
I think what’s happened as Rhinoshield get there case made in China, plus they purchase in bulk, there has been a manufacturing defect...
So at the moment Rhinoshield are stuck with the defect stock, I asked the exact same thing they would not answer me.. LOL
Razor blade is your only option! Some user say it works fine others say it dont so it's your call!
Or you can wait until they get rid of this stock and order more stock without defect! But that could be in the note 10 days!
Plus they aren’t telling me when they will get new stock, so I am guessing!
roaduardo said:
I'm tempted to buy this case for the 3rd time and try this method but I don't know. The buttons are not raised enough to begin with. If they were as tall as buttons you'd find on Spigen cases, then for sure I'd try this razor method to try and fix the faulty design but I don't know.
I just cannot understand why RhinoShield is the only one making cases like this. Why is this type of case not more popular? Why would more users not want a bumper-only design. Why doesn't Dbrand and other skin makers not make a bumper-only case that helps show of their awesome skins better?
Click to expand...
Click to collapse
I honestly don't think I've ever been pleased w/Rhinoshield's bumpers.
I gave 'em a shot only after this design/model from Nillkin disappeared,in the Note 3/4/5 days (guessing you had one) :
Supcase had something similar,but,it's nowhere to be found on devices from the past 2-3 yrs as well.
Anyhoo,I think the problem w/Rhinoshield is their marketing pitch is strength/brute protection & if they pared down the overall width/thickness & eased-up on the button stiffness,they'd fail on that account.
IIRC,I 1st gave Rhinoshield a shot w/the S8+ & found the fit to be way too loose. IDK how the button situation was,as I returned it as soon as I got an RMA.
The exact opposite w/the S9+,a very snug fit,but,the construction lended itself to adding too much width to the grip & the buttons were stiff.
It got little use & I tossed it in the garbage soon after taking delivery.
IDK why no one steps up to the plate & makes a backless bumper that has a decent fit/low profile & usable buttons,or,for that matter,just have cutouts for the buttons.
I get it on the less popular phones,but,I'd think it'd be profitable for at least one mfg (if not Samsung themselves) to make such a bumper for the Galaxy S & Note lineup.
I suppose we shouldn't be surprised,as we've seen feature loss since the good 'ol Note 4 days,the same applies to case variety....................................
KOLIOSIS said:
I honestly don't think I've ever been pleased w/Rhinoshield's bumpers.
I gave 'em a shot only after this design/model from Nillkin disappeared,in the Note 3/4/5 days (guessing you had one) :
Supcase had something similar,but,it's nowhere to be found on devices from the past 2-3 yrs as well.
Anyhoo,I think the problem w/Rhinoshield is their marketing pitch is strength/brute protection & if they pared down the overall width/thickness & eased-up on the button stiffness,they'd fail on that account.
IIRC,I 1st gave Rhinoshield a shot w/the S8+ & found the fit to be way too loose. IDK how the button situation was,as I returned it as soon as I got an RMA.
The exact opposite w/the S9+,a very snug fit,but,the construction lended itself to adding too much width to the grip & the buttons were stiff.
It got little use & I tossed it in the garbage soon after taking delivery.
IDK why no one steps up to the plate & makes a backless bumper that has a decent fit/low profile & usable buttons,or,for that matter,just have cutouts for the buttons.
I get it on the less popular phones,but,I'd think it'd be profitable for at least one mfg (if not Samsung themselves) to make such a bumper for the Galaxy S & Note lineup.
I suppose we shouldn't be surprised,as we've seen feature loss since the good 'ol Note 4 days,the same applies to case variety....................................
Click to expand...
Click to collapse
I'm tempted to try and modify one of Supcase's clear backs but the razor knife that I have doesn't seem strong enough to slice through that kind of plastic because I've tried to modify some other cases I have to create a backless case. It's so, so, so stupid that case makers don't see the benefits of a bumper-only design. It's frustrating for users like me who don't drop their damn phones all the time. I haven't used a screen protector since my iPhone days and my displays have always been great during the time I've had them until I sold/donated them off to another user.
If only I could find some kind of rubber band material that I can wrap the edges of my phone. That's something that these case makers could do. Make rigid edges (with soft, clicky buttons) but top and bottom elastic material so there's a tight fit. Does that make sense? Because getting the phone in and out of a RhinoShield bumper case is difficult. Yet another design issue with their cases.
roaduardo said:
I'm tempted to try and modify one of Supcase's clear backs but the razor knife that I have doesn't seem strong enough to slice through that kind of plastic because I've tried to modify some other cases I have to create a backless case. It's so, so, so stupid that case makers don't see the benefits of a bumper-only design.
Click to expand...
Click to collapse
I've tried modding a few cases where it had a clear distinction from the bumper part of the case & the back cover portion.
Same here,no success,as the remaining bumper didn't have enough rigidity to hold shape.
roaduardo said:
If only I could find some kind of rubber band material that I can wrap the edges of my phone. That's something that these case makers could do. Make rigid edges (with soft, clicky buttons) but top and bottom elastic material so there's a tight fit. Does that make sense? Because getting the phone in and out of a RhinoShield bumper case is difficult. Yet another design issue with their cases.
Click to expand...
Click to collapse
I totally get your design idea.
It's a different take on the 2pc metal bumper design,but,w/o the necessary assembly (screws). Remove the screws from the design,build-in some elasticity on two of the sides for easy removal-installation,yet,still holding shape & retaining edge protection.
That's actually a very nice idea,perhaps you have a friend or two who have some experience w/CAD software & sell the idea/patent/etc.... to one of the case mfgs...................
KOLIOSIS said:
That's actually a very nice idea,perhaps you have a friend or two who have some experience w/CAD software & sell the idea/patent/etc.... to one of the case mfgs...................
Click to expand...
Click to collapse
If only I had the time and resources. I'm happy to see someone else take this kind of thing and run with it so I can just get myself one case. I just need one for my 6T and one for my Note 9. lol
I got the rhino shield bumper, no trouble with the buttons, just not as clicky as I would like. It is also quite slippery and doesn't stay put on the vehicle dash.
With that said, my dbrand grip should be here in a week or so, it is the best case I have had, and loved it on my note 8. They are taking preorders still for shipment in Feburary, so check them out for a bumper style case.
Sent from my Samsung SM-N960U1 using XDA Labs
nuclearrage said:
I got the rhino shield bumper, no trouble with the buttons, just not as clicky as I would like. It is also quite slippery and doesn't stay put on the vehicle dash.
With that said, my dbrand grip should be here in a week or so, it is the best case I have had, and loved it on my note 8. They are taking preorders still for shipment in Feburary, so check them out for a bumper style case.
Click to expand...
Click to collapse
Is it wrong to assume the dbrand grip would be almost impossible to pocket?
I was just about to order the Rhino Shield.
Dbrand is slightly bigger, but very VERY grippy. I wear Duluth Trading Co. Cargo pants and always have 2 phones in the front left cargo pocket.. also fits in my work shirt front pocket. Not sure about jeans or skinny fitting clothes.
Sent from my Samsung SM-N960U1 using XDA Labs
One thing that I really do not like the look of with this case is that there are no raised buttons. The sides of the case appear to be flat, which would make it hard to find the right buttons you're looking for in a pinch or when the phone is inside your pocket or bag.
It's the one thing that's holding me from ordering this case. It looks pretty thick. That's fine but in my opinion if the case is going to be a bit thick you may as well have easily accessible raised buttons on the sides.
I just wish, considering the advancement with 3D print tech, that we could just design our own unique case for our phones. A case the way we want/need it. Like, if I could just have one of Spigen's cases but just the bumper, just the edges and no backing.
roaduardo said:
One thing that I really do not like the look of with this case is that there are no raised buttons. The sides of the case appear to be flat, which would make it hard to find the right buttons you're looking for in a pinch or when the phone is inside your pocket or bag.
It's the one thing that's holding me from ordering this case. It looks pretty thick. That's fine but in my opinion if the case is going to be a bit thick you may as well have easily accessible raised buttons on the sides.
I just wish, considering the advancement with 3D print tech, that we could just design our own unique case for our phones. A case the way we want/need it. Like, if I could just have one of Spigen's cases but just the bumper, just the edges and no backing.
Click to expand...
Click to collapse
It may have different texture for the buttons for us to feel them.
If you scroll a bit the page, you may see it.
dfwfreaks said:
Never like rhinoshield case.
They don't know how to make cases
Click to expand...
Click to collapse
It's CrashGuard #3 for me today. Trying this case out for third time since it's the only viable option today for a bumper-only case.
I followed the advice of some users who suggested using a razor to slice into parts of the volume button grooves in order to make them more tactile. I'm happy to report that it worked pretty well. The buttons are actually registering clicks much easier than out of the box. Just to make it easier, I did the same thing for the power and Bixby button.
The other problem I had with this case is the area around the S-Pen makes it very difficult to remove the S-Pen. It's too small. I have average-sized hands and I have to use my pinky in order to get the S-Pen to eject. So I also modified that area and make some incisions with my razor. Then there's how tight the case can be as you try to put it on so skins can be pushed from the edges as you can see from the photos.
I just can't stand RhinoShield's tone-def response to criticisms to their CrashGuard cases. You have users reporting defective design features and they do nothing but push back with their half-baked suggestions to make their product work instead of correcting their design flaws.
They need to listen and stop deflecting. Spigen needs to also listen to us and give us a bumper-only solution.
dfwfreaks said:
Just get a tempered glass screen protector and D brand skin, bruh.
Click to expand...
Click to collapse
Already had the Dbrand on for weeks and I've never used a screen protector on any Android phone. Last time I used a screen protector was on my iPhone 4s.