My update.zip isn't working! - Android Software/Hacking General [Developers Only]

Hi everyone, I wrote a script to modify kernel voltages upon bootup for the EVO. I also made an update.zip, but it doesn't seem to be working properly and I can't figure it out. Placing the script in /system/etc/init.d works just fine but flashing the .zip that would do that for you does not.
Can someone please take a look at this and tell me what I'm doing wrong? It is probably something simple in the updater-script that I am missing. Thanks!

You should post this in the EVO section. Might get more help there.
Sent from my always stock, EC05 Epic 4G

zanderman112 said:
You should post this in the EVO section. Might get more help there.
Sent from my always stock, EC05 Epic 4G
Click to expand...
Click to collapse
I thought about it, but update.zip's are used over alot of Android devices. I thought I might get a little more help here.

-viperboy- said:
I thought about it, but update.zip's are used over alot of Android devices. I thought I might get a little more help here.
Click to expand...
Click to collapse
Well, I'll help keep it at the top of the list.
Sent from my always stock, EC05 Epic 4G

Any help guys? I'd really appreciate if I could get this working!

Related

[TUT] Ubuntu on Evo 4g

First you have to flash this zimage
http://forum.xda-developers.com/attachment.php?attachmentid=357141&d=1278649181
Do this by rebooting your phone into fastboot
adb reboot-bootloader
then,
fastboot flash zimage zImage
then reboot and follow the instructions on this tutorial and it will work like a charm
http://htcevohacks.com/htc-evo-hacks/how-to-install-ubuntu-on-htc-evo-4g/
Thank vinny75 for compiling the zimage that makes this work for the evo
and thank the guy who wrote the tutorial for everything else..
thank me for nothing because i didnt do anything lol
EDIT: EVERYBODY JUST FOLLOW THE DIRECTIONS ON THIS LINK
http://htcevohacks.com/htc-evo-hacks/how-to-install-ubuntu-on-htc-evo-4g/
Please, wrong section... I am begging you. The Q&A section is two clicks away.
Ubuntu hasn't been ported to the Evo. It is a highly involved process. You can't expect a ROM for the Nexus One to work on the Evo right? There are drivers to port, kernel modifications to be made. Lots of stuff have to happen first.
The website you pointed to mentions that he is working on a port anyhow. Wait for that to come out.
Click to expand...
Click to collapse
I'm going to leave this here, because mistakes shouldn't be hidden under a rug, but acknowledged and learned from. I am following this thread, and I may give it a try when I am done with my Physics studies this weekend.
Jykinturah said:
Please, wrong section... I am begging you. The Q&A section is two clicks away.
Ubuntu hasn't been ported to the Evo. It is a highly involved process. You can't expect a ROM for the Nexus One to work on the Evo right? There are drivers to port, kernel modifications to be made. Lots of stuff have to happen first.
The website you pointed to mentions that he is working on a port anyhow. Wait for that to come out.
Click to expand...
Click to collapse
i messaged toast and he told me to put it in the development section
Seems like a development thread to me
Sent from my PC36100 using XDA App
There is the Linux for android app in the market but it will only work with a loop file system which our kernels don't have or a specially partitioned SD card.
EtherealRemnant said:
There is the Linux for android app in the market but it will only work with a loop file system which our kernels don't have or a specially partitioned SD card.
Click to expand...
Click to collapse
if loop file system is required and loop support isnt compiled into the stock kernel, i haven't checked this, but with the HTC source coded release last week, shouldn't be an issue to compile your own kernel adding in loop support or having a ROM/kernel dev add in loop support.
edit: if i remember right, its a simple option to check under file system in the make kernel config.
Jykinturah said:
Please, wrong section... I am begging you. The Q&A section is two clicks away.
Click to expand...
Click to collapse
Why is it you repeatedly insist on trolling this "wrong section" bull**** on almost all the threads? It's not your job.
Toast will take care of it. bobdude5 isn't a new member and yet you treat him as such? His question obviously belongs in this section and even when you call him out on it... a Mod has already authorized him to post in section? I bet you feel dumb.
It seems to me, you have no idea where most questions belong, it's probably best you keep your mouth shut and let Toast worry about those who are posting in the wrong section -- it's not even that hard for a Mod to move certain questions to a different section.
Add your input, just don't be a troll.
pseudoremora said:
Why is it you repeatedly insist on trolling this "wrong section" bull**** on almost all the threads? It's not your job.
Toast will take care of it. bobdude5 isn't a new member and yet you treat him as such? His question obviously belongs in this section and even when you call him out on it... a Mod has already authorized him to post in section? I bet you feel dumb.
It seems to me, you have no idea where most questions belong, it's probably best you keep your mouth shut and let Toast worry about those who are posting in the wrong section -- it's not even that hard for a Mod to move certain questions to a different section.
Add your input, just don't be a troll.
Click to expand...
Click to collapse
Yes, I feel dumb. And I am also very sorry. I will stop.
Jykinturah said:
Yes, I feel dumb. And I am also very sorry. I will stop.
Click to expand...
Click to collapse
It's appreciated.
I'd be interested in getting Ubuntu working on the EVO 4G. This is definitely a kick-start kind of thread to get that done, too, and could definitely be a start to a larger project that didn't have much visibility before.
Jykinturah said:
Yes, I feel dumb. And I am also very sorry. I will stop.
Click to expand...
Click to collapse
I too apologize for my overbearing tone, it's just there are a tun of new people here and then there are veterans -- most of which know the rules by now and understand the ramifications for there actions; don't take it upon yourself to worry about them; that's what the mods are for. Again, sorry.... and thank you.
|Jason8| said:
It's appreciated.
I'd be interested in getting Ubuntu working on the EVO 4G. This is definitely a kick-start kind of thread to get that done, too, and could definitely be a start to a larger project that didn't have much visibility before.
Click to expand...
Click to collapse
You might want to check the Nexus One thread, someone has gotten Ubuntu to work on it... the setup might be able to work with the EVO.
Jykinturah said:
Yes, I feel dumb. And I am also very sorry. I will stop.
Click to expand...
Click to collapse
Off topic ... but very big man/woman of you to admit your wrongdoings and not act like a kid about it. Greatly appreciated
Ok back on topic please.
Also I wanna add its most likely the kernel also. I can compile one for testing tonight if someone doesn't wanna help out and do it first. I think we also need to setup the evo on decordes Linux for HTC devices wiki. I'm at work so searching and linking isn't possible atm. I know he has a section for us there already. We can also gain from the wikis for similar devices there. Anyhow yeah let's not clutter thus thread with trash and let the development begin.
For anyone wanting to see Ubuntu running on the Nexus One and tutorial on how to do it... here's the video.
http://nexusonehacks.net/nexus-one-hacks/how-to-install-ubuntu-on-your-nexus-oneandroid/
Click to expand...
Click to collapse
Now, obviously the directions are for the NEXUS ONE... and most likely won't work for the EVO, however this is good starting point to see what steps can be taken from the video and tweaked to make it work with our EVO's.
Good luck.
I am actually working on this
The problem with it is that the Evo 4G kernel needs to be compiled with support for loop devices. All Nexus One ROMs actually support this but Evo 4G doesn't.
The best way would be to ask those guys making the ROMs to compile the support for loop devices for future versions such as OMJ Roms.
Then could just use the same Nexus One script and would work.
In the meanwhile, I am learning to compile the kernel myself but perhaps you guys can ask the others to include support for loop devices on other ROMs.
Just need to enable CONFIG_DEV_BLK_LOOP=y in the kernel config and rebuild.
Seems to be working now, installing LXDE as I type this.
extract the attached zImage then boot into fastboot and "fastboot boot zImage" to test.
EDIT: VNC works.
Why not something more lightweight than ubuntu?
Ubuntu netbook remix might be nice.....
Vinny75 said:
Just need to enable CONFIG_DEV_BLK_LOOP=y in the kernel config and rebuild.
Seems to be working now, installing LXDE as I type this.
extract the attached zImage then boot into fastboot and "fastboot boot zImage" to test.
EDIT: VNC works.
Click to expand...
Click to collapse
yup it works! awsome man great job do you mind if i quote your post onto the first post?
bobdude5 said:
yup it works! awsome man great job do you mind if i quote your post onto the first post?
Click to expand...
Click to collapse
Could you post the kernel that gets this to work with some instructions on how to install it etc? I am running BBv3 and I would love to have this ubuntu install working!!
WHOOHOO!
Vinny75 said:
Just need to enable CONFIG_DEV_BLK_LOOP=y in the kernel config and rebuild.
Seems to be working now, installing LXDE as I type this.
extract the attached zImage then boot into fastboot and "fastboot boot zImage" to test.
EDIT: VNC works.
Click to expand...
Click to collapse
WHOOHOO! Working fine now!

[WIP] FROYO SENSE 10/3 I need some help.

This is a video of how the rom is progressing
This is not available for download. If you want me to upload it, let me know in the thread.
I'm excited to see this developing for the g1. Thanks to everyone who's helped and the guys in the HERO CDMA forum. nfinitefx45.
Thanks,
jcarrz1
jcarrz1 said:
This rom is Half booting, it starts to odex the frameworks and then says that
media.audio_flinger
media.player
media.camera
media.audio_policy
all died. boo hoo.
Here's what i've done, i've smashed together a cm6 kernel and a ramdisk from a 2.1 hero rom, which shouldn't make it not work.
However, some of the libs may be outdated for froyo.
Thanks to capychimp for the base, his one for magic works?!
Thanks to cyanogen for the kernel
Link: only click this if you know how to use logcat and fool around with stuff inside a rom:
Thanks for any help. Again i'll state this only half-boots, it's not usable. unless you like using your phone as a rechargable light-up paperweight when using this rom. All it shows is the boot screen.
Click to expand...
Click to collapse
I own a Droid Eris as well as the G1. Developer punk.kaos over in the Eris forum has ported Sense/Froyo to the Eris. I believe he got it from the HTC Wildfire. It works, but its in the 'beta' stage right now. It has resolution issues as well as camera issues. I'm sure Kaos will get these sorted out soon. Check the Wildfire forums for it.
mrhousto said:
I own a Droid Eris as well as the G1. Developer punk.kaos over in the Eris forum has ported Sense/Froyo to the Eris. I believe he got it from the HTC Wildfire. It works, but its in the 'beta' stage right now. It has resolution issues as well as camera issues. I'm sure Kaos will get these sorted out soon. Check the Wildfire forums for it.
Click to expand...
Click to collapse
i should have been more specific. this is based on the wildfire dump.
im going to try this NOW on my mytouch 3g (htc magic 32B) and will give feedback
I bet the res on this is going to SUCK! But good luck guises.
Original Android <3ers! said:
I bet the res on this is going to SUCK! But good luck guises.
Click to expand...
Click to collapse
lol maybe it does.. but froyo sense will be good though ^^
it wont get past the splash screen
sorry... I got enraged as there are many newbies around and I exagerrated.
@all always stay ontopic and be polite other than me
lolmensch said:
holy ****! normally i am not flaming but just read the first post!
he said that its not going to work. they need ppl knowing how to dev. and you are a end user mostly like me
i know that i also just fill this thread with offtopic things but the rom is supposed to be modified and not to be flashed.
perhaps somebody will read this one when ignoring the op....
Click to expand...
Click to collapse
OMG OF COURSE I DID READ IT BUT DID YOU READ THIS ??
EDIT this may actually work for some people, my g1 is weird sometimes. try it, it won't brick your phone, but if it bricks your phone it's not my fault.
SO I THOUGHT THAT IT MAYBE COUUUULD WORK ON MY PHONE.
i only posted that it wont get past. so he get sureness.
understand ?
//Nick
nickislauw said:
OMG OF COURSE I DID READ IT BUT DID YOU READ THIS ??
EDIT this may actually work for some people, my g1 is weird sometimes. try it, it won't brick your phone, but if it bricks your phone it's not my fault.
SO I THOUGHT THAT IT MAYBE COUUUULD WORK ON MY PHONE.
i only posted that it wont get past. so he get sureness.
understand ?
//Nick
Click to expand...
Click to collapse
Thanks for taking the time to try it out. calm down lol.
Your behavior is similar to mine, although i don't know for sure if it's the same without a logcat... if you still have it flashed i'd really appreciate one.
Original Android <3ers! said:
I bet the res on this is going to SUCK! But good luck guises.
Click to expand...
Click to collapse
yea it will be a little buggy. Check out screenshots from the Hero CDMA development section, you can see how rosie looks.
hi i found this for resizing, is pretty handy and fast. it might help you. check it out...
http://forum.xda-developers.com/showthread.php?t=785864
etu_aty said:
hi i found this for resizing, is pretty handy and fast. it might help you. check it out...
http://forum.xda-developers.com/showthread.php?t=785864
Click to expand...
Click to collapse
thanks. I'm now getting stuck on fonts when booting... A lot closer though.
Hmm Hmm I'll get someone to look over this. It'd be pretty sexy if we got this to work :3
protomanez said:
Hmm Hmm I'll get someone to look over this. It'd be pretty sexy if we got this to work :3
Click to expand...
Click to collapse
Got it. Uploading probably won't work for mt3g. I currently am using mtd partitions with everything moved onto /system.
I'm uploading one, however, that puts app_s on sd-ext and framework in /data, so there's no need for mtd partitions.
Edit: bam
http://www.mediafire.com/?1dj5rum8oe3ndzo
jcarrz1 said:
Got it. Uploading probably won't work for mt3g. I currently am using mtd partitions with everything moved onto /system.
I'm uploading one, however, that puts app_s on sd-ext and framework in /data, so there's no need for mtd partitions.
Click to expand...
Click to collapse
Yes, that would probably be a good idea. MTD may screw up something that we don't want screwed up
protomanez said:
Yes, that would probably be a good idea. MTD may screw up something that we don't want screwed up
Click to expand...
Click to collapse
lol i like mtd but i know most ppl don't, so i uploaded the normal one. please try it!
jcarrz1 said:
lol i like mtd but i know most ppl don't, so i uploaded the normal one. please try it!
Click to expand...
Click to collapse
Yeah lemme just nandroid my current rom and try it out.
Silly, you forgot to sign it xD
protomanez said:
Silly, you forgot to sign it xD
Click to expand...
Click to collapse
haha well use clockwork... i rarely sign stuff, clockwork doesn't verify if you uncheck the option in the recovery.

Porting CM7 Need Help

Looking for someone to help me comb through all the differences in the CM7 build compared to KD1 and move on to getting it packaged and ready for testing. I have edited the Framework classes.dex file but the rom still needs other items changed as it will get stuck at the Samsung Galaxy S4G boot screen. If anyone is up to take the challenge PM me so we can get started.
Bump
sent from MT. OLYMPUS using my kickass sgs4g.
THE GODS ENVY US!!!!!!!!!
Rebuilt the package again, still having a soft brick. Its either the kernel or permissions. Im working with mad_fitter atm do see if I can work out the debug. I can say there is major differences between these two.
Probably because of the libraries. Also you need a gingerbread kernel. May try porting the vibrant cm7 kernel. That should solve your soft brick
Sent from my SGH-T959V using XDA App
dynamicj said:
Looking for someone to help me comb through all the differences in the CM7 build compared to KD1 and move on to getting it packaged and ready for testing. I have edited the Framework classes.dex file but the rom still needs other items changed as it will get stuck at the Samsung Galaxy S4G boot screen. If anyone is up to take the challenge PM me so we can get started.
Click to expand...
Click to collapse
You will have 999999x more luck trying to actually grab the Vibrant CM7 and porting it over.
What you're trying to do is put 2.3 into 2.2, while mixing AOSP with TouchWiz. That's a recipe for very bad things and lots of wasted time.
I agree with you. I have no clue on a port though. I've never attempted one.
sent from the pits of hell (from an sgs4g)
Thats exactly what im doing I have the CM7 Vibrant source, I have edited the files needed for the mounts. Currently still getting a softbrick. Im trying a different GB source atm because its getting a kernel panic.
Oh awesome. Damn son, your all over this!
sent from the pits of hell (from an sgs4g)
I will help any way I can for a GB port! Let me know!
dynamicj said:
Looking for someone to help me comb through all the differences in the CM7 build compared to KD1 and move on to getting it packaged and ready for testing. I have edited the Framework classes.dex file but the rom still needs other items changed as it will get stuck at the Samsung Galaxy S4G boot screen. If anyone is up to take the challenge PM me so we can get started.
Click to expand...
Click to collapse
u cant port cm7... i had tried to when working on ports initially, and it has to do with the filesystem... but more power to u if u figure it out... i softbricked all over the place....
badb4lyfe said:
u cant port cm7... i had tried to when working on ports initially, and it has to do with the filesystem... but more power to u if u figure it out... i softbricked all over the place....
Click to expand...
Click to collapse
Pretty much noticed that as I dug into this more but I believe it will work with the correct kernel. I have moved to trying another GB source and will report back what comes about with it.
You tried even when it was figured out how to flash roms? Its a lil different now.
Im trying this on my daily driver so this is a little slow. I wish I had a extra to mess with . Anyways still the same issues even with the same mounts as posted in other threads. Still looking into the problem.
It shows a fix for the mounts and permissions though. Tried that yet?
I did both. I am giving you links for the Device State and Logcat hopefully someone with a little more knowledge can look it over and point me to the right direction here.
www.dynamicproservices.com/ds.txt
www.dynamicproservices.com/logcat.txt
Thanks again for the help guys!
dynamicj said:
I did both. I am giving you links for the Device State and Logcat hopefully someone with a little more knowledge can look it over and point me to the right direction here.
www.dynamicproservices.com/ds.txt
www.dynamicproservices.com/logcat.txt
Thanks again for the help guys!
Click to expand...
Click to collapse
From looking at the device state, a lot of the java isn't working out (obviously), and also look at line #06-10 21:29:28.208. This tells me that the file system (or parts of it) that your are using is for another device.
Specifically here: ALSALib device/samsung/GT-I9000/alsa-lib/src/control/setup.c:565:
I've never attempted a port with a samsung (hell I've only had mine a little over a week), But there is a thread in this dev section about porting vibrant roms to this device. Did you look over that? A lot of this seems to be related to what I read there.
I did follow that to a T and a few others. I dont think the device name is much of a issue atm. Its the permissions and vm not working correctly.
I also noticed alot of Data permission errors in adb as well as not being able to access anything with SU even with superuser installed and SU in the system as well. Hopefully someone can hop on board with this and help me figure this out.
Ya good call. I'm afraid that in this department I'm not much help. The errors are definitely a familiar one, but I can't think of an explanation except for permissions and java. Seems a lot of folks are having the same kind of issues.
mad_fitter said:
Specifically here: ALSALib device/samsung/GT-I9000/alsa-lib/src/control/setup.c:565:
Click to expand...
Click to collapse
That's because the Vibrant CM7 was ported from Galaxy S - aka I9000.
So you're trying to port a port. By the way, they have all but given up on porting CM7 to the Vibrant last I looked. I just sold my Vibrant about a week ago and I would flash the nightlies as new ones were released. Although they were getting close there were still major issues with them.
My advice... accept the fact that gingerbread will not happen on this phone. But if you're one of those who refuse to accept defeat... much luck in your endeavors! Because ginger love would be amazing.
That is not cm7 as stated earlier but it is a port from a vibrant and cm7 has a few problems mainly it looks like gps which has had issues on most of these Samsung phones.
If someone knows more on the problem please post it so i can.correct them.
Sent from my SGH-T959V using XDA App

Hacks for WIND Mobile Samsung Galaxy S 4G?

I picked up a WIND Samsung Galaxy S 4G today. I looked in the Android Dev thread here and I don't see anything specifically for this phone.
The model number is T-959W so I don't want to try anything with hacks/roms etc meant for the T-Mobile version.
I'd be happy to supply a dump of my phone for any devs who want to play around and help us here in the great white north!
Thanks
System dump would be nice if you can provide it. I'd advice against installing any mods you found here. Good thing you're cautious
Great, thanks! I have never done a dump before so I'll have to look into how to do it. I will let you know when I do.
I see it has 8 gig internal, we only got 2 there's a tutorial somewhere for system dumps, let me find you the link.
You need to be rooted I believe.
m.youtube.com/#/watch?desktop_uri=/watch?v=UWs6PKnDtFk&v=UWs6PKnDtFk&gl=US
Sent from my SPH-D710 using Tapatalk
Source files found
I found the following source files from opensource.samsung.com
SGH-T959W_NA_Opensource.zip
SGH-T959W_NA_GB_Opensource.zip
Will these help XDA with support for the Wind SGS4G?
Sure but idk if our devs are gonna build you guys stuff. Also, go to sampro.pl, it is a polish site so use Google chrome to translate it, then create an account for the site, go firmware downloads for your model if you see. If you do, then post a link to the latest version.
Sent from my SGH-T959V using xda premium
959w was not listed on the site (did not register).
Sent from my SGH-T959W using xda app-developers app
Imaging phone
I have heard that there may be an update in August. It may be prudent to wait for this update before capturing a ROM image, in case important fixes are made.
I guess a good question would be whether anyone has had any experience flashing T-Mobile SGH-959v ROMs on to this device.
Another avenue could be to ask someone inside Samsung whether they changed much between models.
bminuk said:
I found the following source files from opensource.samsung.com
SGH-T959W_NA_Opensource.zip
SGH-T959W_NA_GB_Opensource.zip
Will these help XDA with support for the Wind SGS4G?
Click to expand...
Click to collapse
Absolutely! I'm currently taking a little break (gotta find a job... like two weeks ago.), but when the dust settles, I'll take a little look at the source and see if we can help out.
What you could start with is a diff between the SGH-T959V-TMB_GB_Opensource.zip and the SGH-T959W_NA_GB_Opensource.zip drops.
I'd be willing to look into giving you guys something fun to work with.
I'll do a series of diffs tonight on the T959W stock kernel source and the T959V sources (stock and our CM kernel).
I have Telus S4G, which is T959P. However I've never had a problem using T959V roms,
Sent from my SGH-T959V using xda app-developers app
Another potential problem
I have been hearing on the web (in these forums and on the SuperOneClick page) that the 959W is not being successfully rooted in the usual ways. Has anyone had luck with this?
endee said:
I have Telus S4G, which is T959P. However I've never had a problem using T959V roms,
Sent from my SGH-T959V using xda app-developers app
Click to expand...
Click to collapse
You really shouldn't flash roms not made for your phone. If they contain bootloaders, you could brick your phone.
Hey T959W people. Looked at the source and things are looking pretty close. I'm not saying to run off and flash our stuff, but I need some info and someone with the big kahunas to try flashing some stuff.
Please be running linux. I can't help you with windows problems.
It would also be helpful if you have a usb download mode jig.
You can get one here:
http://mobiletechvideos.mybigcommerce.com/samsung-galaxy-s-download-mode-jig/
Ok Canadians! I've verified that the SGH-T959W should be exactly the same as the SGH-T959V.
There were some interesting differences between our T959V and T959W that may fix some bugs for us on T959V.
With that said, please... please... please, read all of the instructions for flashing ROMs and Kernels very carefully!
If the rom contains bootloaders, please DO NOT flash them until we can confirm there are no bootloader differences.
Like I said before, it is very common to soft brick your device. It is not the end, and do not worry if you do this. Make sure you get yourself a usb download mode jig here:
bhundven said:
You can get one here:
http://mobiletechvideos.mybigcommerce.com/samsung-galaxy-s-download-mode-jig/
Click to expand...
Click to collapse
This will help you use heimdall or odin to flash stuff to your phone to make everything happy again.
You will only hard brick this device by writing the wrong bootloaders to the phone, which is why I am warning you to not flash bootloaders, for now!
With that, enjoy cm7, cm9, aokp, et alii!
I will also announce this in the android general forum!
http://forum.xda-developers.com/showthread.php?t=1764298
I managed to get my Wind SGH-T959W rooted and up and running with a unofficial CM9 build, but it took a bit of work.
Firstly, I tried just about every one-click solution out there, to no avail. It's possible SOC 1.7 with rattlethecage works, but I didn't have the patience to find out whether I simply had to wait a bit longer.
I followed this guide(whilst clenching every clenchable muscle I could consciously control):
http://www.galaxyforums.net/forum/o...mission-t-mobile-galaxy-s-4g-gingerbread.html
The gist is, Odin 1.7, stock+voodoo for T959V, plus some update that I'm not qualified to describe. That should get you rooted and if that's all you're looking for, you'll have to suffer through a little T-Mobile branding on startup.
Once you got it all rooted, you'd think it'd be a good idea to toss sgs-ics on there, right? Well, no. After installing the 4G variant, it promptly set off into a boot loop which I'm again, unqualified to diagnose. The obvious solution was to try another team's version of ICS, which I indeed found here:
http://forum.xda-developers.com/showthread.php?t=1730954
Barring some missing features, it sounds like a good alternative to sgs-ics. Though I had to go through one additional step, which I really, honestly assure you I was under-qualified to execute. When I tried to load Team Acid's CM9 r3 it gave me an assert on the updater-script, since the hardware didn't match up. Easy. Unzip the package, open up META-INF/com/google/android/updater-script, remove the first check. You know it's the same hardware, you don't need some stinkin' script to tell you it won't work.
So all said and done, I now have a Wind Mobile SGH-T959W running ICS 4.0.4 courtesy of bhundven, the Odin folks, Team Acid, and likely a slew of other contributors.
Thanks folks, and enjoy!
PS, if you want that tarball bhundven, send me a PM with some brief instructions, and hopefully you can help my fellow Winders.
Derpopotamus said:
I managed to get my Wind SGH-T959W rooted and up and running with a unofficial CM9 build, but it took a bit of work.
Click to expand...
Click to collapse
Would have been easy, had you just followed my directions.
Derpopotamus said:
Firstly, I tried just about every one-click solution out there, to no avail. It's possible SOC 1.7 with rattlethecage works, but I didn't have the patience to find out whether I simply had to wait a bit longer.
I followed this guide(whilst clenching every clenchable muscle I could consciously control):
http://www.galaxyforums.net/forum/o...mission-t-mobile-galaxy-s-4g-gingerbread.html
The gist is, Odin 1.7, stock+voodoo for T959V, plus some update that I'm not qualified to describe. That should get you rooted and if that's all you're looking for, you'll have to suffer through a little T-Mobile branding on startup.
Once you got it all rooted, you'd think it'd be a good idea to toss sgs-ics on there, right? Well, no.
Click to expand...
Click to collapse
Duh, and rightfully so. You should not flash anything that was not made for your phone.
As I said before. The SGH-T959V and the SGH-T959W are the same phone, just packaged differently for t-mobile vs. wind.
Derpopotamus said:
After installing the 4G variant, it promptly set off into a boot loop which I'm again, unqualified to diagnose. The obvious solution was to try another team's version of ICS, which I indeed found here:
http://forum.xda-developers.com/showthread.php?t=1730954
Click to expand...
Click to collapse
So, obviously this worked.
Derpopotamus said:
Barring some missing features, it sounds like a good alternative to sgs-ics.
Click to expand...
Click to collapse
:facepalm:
Derpopotamus said:
Though I had to go through one additional step, which I really, honestly assure you I was under-qualified to execute. When I tried to load Team Acid's CM9 r3 it gave me an assert on the updater-script, since the hardware didn't match up. Easy. Unzip the package, open up META-INF/com/google/android/updater-script, remove the first check. You know it's the same hardware, you don't need some stinkin' script to tell you it won't work.
Click to expand...
Click to collapse
We can fix that by adding your OTA Assert to our build. Then this won't happen. Let me fix that.
Thanks for someone finally reporting something useful!
Derpopotamus said:
So all said and done, I now have a Wind Mobile SGH-T959W running ICS 4.0.4 courtesy of bhundven, the Odin folks, Team Acid, and likely a slew of other contributors.
Thanks folks, and enjoy!
PS, if you want that tarball bhundven, send me a PM with some brief instructions, and hopefully you can help my fellow Winders.
Click to expand...
Click to collapse
No pm needed.
Open an account on mediafire.com.
Upload the tarball
click share after the tarball is up
Post your own topic in the general forum so everyone knows where to get it.
Everyone Profits!
One more thing that would be very handy from somone with stock on T959W.
Please:
Code:
adb pull /system/build.prop
edit the file with notepad++(windows), textedit(macosx), or gedit(linux) and put the results on pastebin.com.
Then paste the link in this forum.
THANKS!
Build.prop for stock phone
bhundven said:
One more thing that would be very handy from somone with stock on T959W.
Please:
Code:
adb pull /system/build.prop
edit the file with notepad++(windows), textedit(macosx), or gedit(linux) and put the results on pastebin.com.
Then paste the link in this forum.
THANKS!
Click to expand...
Click to collapse
http://pastebin.com/aTHkkwDJ

[Q] A project I'm working on (Updater Script)

I've been slowly working on a JB Sense 4x project for fun. as I learn I go back and make changes here and there hoping that maybe, just maybe, one day it'll boot. As I was working on it yesterday I realized that with my Shift not working there will not be anyway for me to test it so I thought I would ask if anyone is interested in helping. It is a port from the One X. I haven't asked for permission from the original dev to release anything publicly yet (because I don't know if it'll work) so I'll have to pm links for now. Where I am at with this at the moment is the updater script. I've been through the rest of the ROM and think I have a good start but I haven't done anything in the META-INF folder. I am still reading up on how to write my own updater script but I'm not capable yet so those who want to help, this is my immediate need. It would be good for folks to go through the build.prop also. I'm still a little unsure about the changes necessary to go from a GSM ROM to CDMA.
Edit: I probably should have put this in General instead of Q&A. Sorry...
Chad The Pathfinder said:
I've been slowly working on a JB Sense 4x project for fun. as I learn I go back and make changes here and there hoping that maybe, just maybe, one day it'll boot. As I was working on it yesterday I realized that with my Shift not working there will not be anyway for me to test it so I thought I would ask if anyone is interested in helping. It is a port from the One X. I haven't asked for permission from the original dev to release anything publicly yet (because I don't know if it'll work) so I'll have to pm links for now. Where I am at with this at the moment is the updater script. I've been through the rest of the ROM and think I have a good start but I haven't done anything in the META-INF folder. I am still reading up on how to write my own updater script but I'm not capable yet so those who want to help, this is my immediate need. It would be good for folks to go through the build.prop also. I'm still a little unsure about the changes necessary to go from a GSM ROM to CDMA.
Edit: I probably should have put this in General instead of Q&A. Sorry...
Click to expand...
Click to collapse
The problem will continue to be that we don't have a kernel for Sense 4.0, it won't work till we have one... but thanks for putting in the work... do you have your OG yet?
Ive modified Strapped365's new kernel and think it'll work. Ive gotten a port from the One V to boot before with the mod I made.
Edit: This was my starting point. http://forum.xda-developers.com/showthread.php?t=1707177
Chad The Pathfinder said:
Ive modified Strapped365's new kernel and think it'll work. Ive gotten a port from the One V to boot before with the mod I made.
Click to expand...
Click to collapse
Oh OK... I'll look at it if you want. Just put the links up and whoever wants to try their hand it can... it can be a community project lol
I pmed you the link. I'll put it in Development as a wip when I hear back from the Dev who made the ROM...
I'll help out too if you want :good:
Sent from my PG06100
Thanks. I've been given permission from the dev, theDroidfanatic to put it out there publicly and will have it posted today.
Edit: Here's the link.
CNexus said:
I'll help out too if you want :good:
Sent from my PG06100
Click to expand...
Click to collapse
Go for it man, I'm kinda busy with three other projects lol. And a new phone coming today, I doubt I'll get around to it any time soon.
I'll test whenever you need a tester.
Sent from my Nexus 10 using xda app-developers app
My shift has quit completely now so I'm not sure how to proceed but thanks...
Edit: if anybody wants to try to make this work, I'll be glad to help as best as I can!
Chad The Pathfinder said:
My shift has quit completely now so I'm not sure how to proceed but thanks...
Edit: if anybody wants to try to make this work, I'll be glad to help as best as I can!
Click to expand...
Click to collapse
What do you need? I have a working device but the flex/earpiece needs replaced
Sent from my myTouch_4G_Slide using Tapatalk 2
Chad The Pathfinder said:
My shift has quit completely now so I'm not sure how to proceed but thanks...
Edit: if anybody wants to try to make this work, I'll be glad to help as best as I can!
Click to expand...
Click to collapse
If I can find a cheap shift on ebay I'll try and get it for you.
Im eyeying one for 5.50 right now.
and a few others for less than that. :good:
Wow guys that's great. I don't know what's wrong with my shift now. The flexcable was torn almost in half. I'm thinking I may have somehow broken something else putting the new one in. It's got me pretty bummed.

Categories

Resources