Database Info

Stuck on LG Logo after flashing a corrupted ROM file

Hi.
So I was flashing a ROM using CWR but it looks like the Zip file was corrupted. So after I selected the zip file, the phone restarted and now is stuck on LG Logo.
Anyway to resurrect the phone from dead?
Any help will be greatly appreciated.

Try power button+vol down+3d button if you can get the recovery....

Claudio67 said:
Try power button+vol down+3d button if you can get the recovery....
Click to expand...
Click to collapse
Thanks for the reply.
When I hold those three buttons the phone started, shows LG Logo for a few second then turns off.
I tried LG Mobile Update tool as well, after I type my Serial and IMEI, it says "Starts downloading data..." then immidately shows a "There a fatal error with LG Update tool, please contact your adminisitrator"

Farhang said:
Thanks for the reply.
When I hold those three buttons the phone started, shows LG Logo for a few second then turns off.
I tried LG Mobile Update tool as well, after I type my Serial and IMEI, it says "Starts downloading data..." then immidately shows a "There a fatal error with LG Update tool, please contact your adminisitrator"
Click to expand...
Click to collapse
When you see the logo release only the power button immediatly after 5-6 second the recovery should appear...
If you will not able to get the recovery look here:
http://forum.xda-developers.com/showthread.php?t=1186406
I had the same problem and:
1) Start LG Mobile update
2) Power off your phone without USB cable
3) Connect the USB cable and wait for the LG logo and the annimation battery
4) Pressing Vol.up + power 6-7 seconde wait for the LG logo and The screen turns off
5) Again pressing Vol.up + power 6-7 seconde and wait until the drivers are installed (LG Mobile update detects your phone and the screen is always off)
Here I was lucky because lgupdater detected my phone and then said that an update was needed. Applied and then everything went fine.
PS sorry for my english...

Claudio67 said:
When you see the logo release only the power button immediatly after 5-6 second the recovery should appear...
Click to expand...
Click to collapse
Oh my God!
I really love you! I went to recovery and thank God I had the KingDroid 3D Rom on my memory card. so I did a full wipe and flashed it and now the phone is back and good again.
THANKS A LOT!!! I really appreciate it.

wow well done!
Cya mate!

Claudio67 said:
When you see the logo release only the power button immediatly after 5-6 second the recovery should appear...
If you will not able to get the recovery look here:
http://forum.xda-developers.com/showthread.php?t=1186406
I had the same problem and:
1) Start LG Mobile update
2) Power off your phone without USB cable
3) Connect the USB cable and wait for the LG logo and the annimation battery
4) Pressing Vol.up + power 6-7 seconde wait for the LG logo and The screen turns off
5) Again pressing Vol.up + power 6-7 seconde and wait until the drivers are installed (LG Mobile update detects your phone and the screen is always off)
Here I was lucky because lgupdater detected my phone and then said that an update was needed. Applied and then everything went fine.
PS sorry for my english...
Click to expand...
Click to collapse
I have the stock v10c ROM on a 'Rogers' LG Optimus 3D.
I had been using the Google+ Android client and pushed the power button to put the phone tosleep (with the G+ screen still being displayed). About 15 mins later I pulled the phone out of my pocket and it was dark, but the touch countrols were all lit up.
I know that usually isn't good news.
I pulled the battery and tried to re-boot. It gets to the Rogers bitmap and then boot-loops, with a flash of the Rogers scren each time it restarts a cycle.
I did vol+down+Power and the it booted into a recovery (3e) menu that only offered me the chance to wipe all user data. Ok. I did that. The phone then presented a triangle logo and the green android and sat there.
After about 10 mins I pulled the battery again and did the Vol+down+3D button+Power boot to the REAL recovery menu.
I then did a factory reset. I have assumed the Home button is the enter button (BTW).
Again the triangle and the green android appear. They are still there 10 mins later.
Not sure what to do now...the phone won't boot and the factory reset won't fix it. But it isn't dead. I can still get to recovery, so in theory this is fixable. I just don't have time for it right now.
I was wondering if maybe the phone had updated OTA in my pocket and i didn't realise it and I may have messed up the process. But I have never seen a phone do an OTA update without first notifying the user and seeking confirmation...so I that probably isn't the case.
Very annoying.
I'm posting this here in case anyone else has the same experience.

[Q] Can only boot by plugging charger????

Hi
Can anyone help please? Also, are there anyone having similar issue.
Issue: Pressing the power button is not starting my device. In order to power on I have to connect charger (not usb with PC) and then press power button. What I have noticed is that once I switch off my phone it gets in to "emergency/recover mode". I came to this conclusion because after I switch the phone off, take battery out and put back in and then connect usb cable with my PC. I can see OMAP driver loads and also in the PC's Device Manager I am able to see LG CDMA.... under "ports".
It was not like this until i started several attempts to flash baseband.
Sequence of actions
Here is the sequence of actions I went through and end up having my phone at this stage
1. Followed the procedure (http://forum.xda-developers.com/showpost.php?p=17177547&postcount=2) step by step using LG flash tool. The application was constantly crashing (PC is running on XP pro). Before flashing baseband I flashed GB hence I lost radio.
2. To bring back my radio I had to reflash 2.2 following the same procedure (emergency recovery method) in the link given in baseband flashing.
3. After finishing the recovery flash I could not start my phone using power button. I started thinking that I bricked my phone. I left it for a day. Then I thought that the battery is fully drained and is the reason for not powering on. When I connected charger I started seeing LG logo and also the phone was started. I was more excited and happy that my phone was not bricked. After this point I need charger connected everytime when i want switch on my phone. so, I am scared to swtich off my phone unless I have charger handy to me.
4. I removed all the application (LG flashing related) including LG drivers I installed before. Now I reinstalled all the necessary app and drivers for baseband flashing. This time baseband flashing was done successfully (though at 22%). Then I flashed GB rom and everything works fine.
The only issue i have is, I can not switch on my phone without charger connected.
If anyone knows solution please help me.
Thanks in advance.

http://forum.xda-developers.com/showthread.php?t=1331390
I used to have the same problem,
I think its a problem about boot,
when I use lg tools it always gives error, because phone wont boot without charger, so it cant continue upgrading
I try flasing original kdz file from lg flash tool, and use emergency rescue mode,
I dont know but it somehow repair the boot
you can fix permissions before you use lg tools.
what error do you have while using lg tool?
can you post the screen capture

nurikarakaya said:
http://forum.xda-developers.com/showthread.php?t=1331390
I used to have the same problem,
I think its a problem about boot,
when I use lg tools it always gives error, because phone wont boot without charger, so it cant continue upgrading
I try flasing original kdz file from lg flash tool, and use emergency rescue mode,
I dont know but it somehow repair the boot
you can fix permissions before you use lg tools.
what error do you have while using lg tool?
can you post the screen capture
Click to expand...
Click to collapse
After i uninstalled all the drivers (incl. LG tools) and reinstalled and I am not seeing any more error while using LG tools. I even flashed GB baseband twice but no use. The link you have given explains the same issue I have.

I think you have to install froyo version of baseband and firmware first,
then try
http://forum.xda-developers.com/showthread.php?t=1186406
STUCK AT LG LOGO:
with factory reset!
1) Start LG Mobile update
2) Power off your phone without USB cable
3) Connect the USB cable and wait for the LG logo and the annimation battery
4) Pressing Vol.up + power 6-7 seconde wait for the LG logo and The screen turns off
5) Again pressing Vol.up + power 6-7 seconde and wait until the drivers are installed (LG Mobile update detects your phone and the screen is always off)
-If this is the first time the driver install redone the item 5).
6) Click on User/Support then emergency mode, insert your IMEI and click on check
7) Wait for download and upgrading (15/20 min)

Questions or Problems Should Not Be Posted in the Development Forum
Please Post in the Correct Forums and Read THIS
Moving to General

lufc said:
Questions or Problems Should Not Be Posted in the Development Forum
Please Post in the Correct Forums and Read THIS
Moving to General
Click to expand...
Click to collapse
Thanks. will stick to the rule in future..

nurikarakaya said:
I think you have to install froyo version of baseband and firmware first,
then try
http://forum.xda-developers.com/showthread.php?t=1186406
STUCK AT LG LOGO:
with factory reset!
1) Start LG Mobile update
2) Power off your phone without USB cable
3) Connect the USB cable and wait for the LG logo and the annimation battery
4) Pressing Vol.up + power 6-7 seconde wait for the LG logo and The screen turns off
5) Again pressing Vol.up + power 6-7 seconde and wait until the drivers are installed (LG Mobile update detects your phone and the screen is always off)
-If this is the first time the driver install redone the item 5).
6) Click on User/Support then emergency mode, insert your IMEI and click on check
7) Wait for download and upgrading (15/20 min)
Click to expand...
Click to collapse
Thanks. I will try it tonight or will wait for official GB release then i can do the this emergency update.

Emergency Mode after Update from LG update assistant

During the update enerything was good. It downloaded the software then when installing it. A message popped up ur update could not be completed please unplug and take out your battery. Reinsert and retry. I did it about 10 times but it just kept saying that. Now the state is as i turn on my cell. Lg logo shows for a sec and then it automatically goes into the Emergency Mode. Can anybody please help.:crying: IN LG Optimus One P500

ishesh12 said:
During the update enerything was good. It downloaded the software then when installing it. A message popped up ur update could not be completed please unplug and take out your battery. Reinsert and retry. I did it about 10 times but it just kept saying that. Now the state is as i turn on my cell. Lg logo shows for a sec and then it automatically goes into the Emergency Mode. Can anybody please help.:crying: IN LG Optimus One P500
Click to expand...
Click to collapse
Try this:
http://forum.xda-developers.com/showthread.php?t=1275523
Hit thanks if i helped you.. !

[Q] Emergency Mode after undate Asisitant

During the update enerything was good. It downloaded the software then when installing it. A message popped up ur update could not be completed please unplug and take out your battery. Reinsert and retry. I did it about 10 times but it just kept saying that. Now the state is as i turn on my cell. Lg logo shows for a sec and then it automatically goes into the Emergency Mode. Can anybody please help. IN LG Optimus One P500

ishesh12 said:
During the update enerything was good. It downloaded the software then when installing it. A message popped up ur update could not be completed please unplug and take out your battery. Reinsert and retry. I did it about 10 times but it just kept saying that. Now the state is as i turn on my cell. Lg logo shows for a sec and then it automatically goes into the Emergency Mode. Can anybody please help. IN LG Optimus One P500
Click to expand...
Click to collapse
Try this:
http://forum.xda-developers.com/showthread.php?t=1275523
Hit thanks if i helped you.. !

Lg g Stylo, "no command" please help me!

Please guys I need your help!
Phone model: Lg G Stylo h631 T-Mobile version.
Today I was using my phone and after finishing a call, my phone started to update itself. Then I received a error message. After that, I get stuck with a dead android guy on the screen, and I get the message "no command". I try Different combinations of buttons to solve this problem: Volume Down + Power release and then press the buttons again went the LG logo appear and have no luck. Then I try Volume Up + Power, also have no luck. I think I try almost every possible combination an nothing is working.
If anyone has any idea how to solve this issue please help me. Any help would be appreciated.
(Sorry for my bad English)

Make sure you download or have downloaded and installed the LG drivers from the LG website or any other reliable source or your phone will not be able to recover.
Unplug the phone, take out the battery and once the phone is completely off, replace the battery. Keep the phone powered off and unplugged. Plug a data capable (the usb that came with the phone is best) usb into a PC. Press the VOLUME UP button and HOLD it WHILE plugging the usb into your phone, (The PC should already be connected before plugging in the phone) continue to hold the VOLUME UP button until you pass the LG splash screen and you should then be in DOWNLOAD MODE. From there you can reflash the stock ROM that came with the phone. The stock ROMs are pretty easy to find here on XDA.
If you don't know what flashing a ROM is or means then XDA has plenty of guides for that as well. To return to stock you will need the LG Flash Tool or LG UP depending on which version you want to flash. Marshmalllow uses the LG UP program and Lollipop uses the LG Flash Tool. You can find guides and all the tools\software you will need to fix your phone right here on XDA or a little Google searching.